#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/usb_ch9.h>
#include <linux/workqueue.h>
#include "usbatm.h"
#define RESUBMIT_DELAY 1000 /* milliseconds */
-#define DEFAULT_ALTSETTING 1
+#define DEFAULT_BULK_ALTSETTING 1
+#define DEFAULT_ISOC_ALTSETTING 2
#define DEFAULT_DL_512_FIRST 0
+#define DEFAULT_ENABLE_ISOC 0
#define DEFAULT_SW_BUFFERING 0
-static int altsetting = DEFAULT_ALTSETTING;
+static unsigned int altsetting = 0; /* zero means: use the default */
static int dl_512_first = DEFAULT_DL_512_FIRST;
+static int enable_isoc = DEFAULT_ENABLE_ISOC;
static int sw_buffering = DEFAULT_SW_BUFFERING;
-module_param(altsetting, int, S_IRUGO | S_IWUSR);
+module_param(altsetting, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(altsetting,
- "Alternative setting for data interface (default: "
- __MODULE_STRING(DEFAULT_ALTSETTING) ")");
+ "Alternative setting for data interface (bulk_default: "
+ __MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: "
+ __MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")");
module_param(dl_512_first, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(dl_512_first,
"Read 512 bytes before sending firmware (default: "
__MODULE_STRING(DEFAULT_DL_512_FIRST) ")");
+module_param(enable_isoc, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_isoc,
+ "Use isochronous transfers if available (default: "
+ __MODULE_STRING(DEFAULT_ENABLE_ISOC) ")");
+
module_param(sw_buffering, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(sw_buffering,
"Enable software buffering (default: "
#define INTERFACE_DATA 1
#define ENDPOINT_INT 0x81
-#define ENDPOINT_DATA 0x07
+#define ENDPOINT_BULK_DATA 0x07
+#define ENDPOINT_ISOC_DATA 0x07
#define ENDPOINT_FIRMWARE 0x05
#define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) )
const struct usb_device_id *id)
{
struct usb_device *usb_dev = interface_to_usbdev(intf);
- struct usb_interface *cur_intf;
+ struct usb_interface *cur_intf, *data_intf;
struct speedtch_instance_data *instance;
int ifnum = intf->altsetting->desc.bInterfaceNumber;
int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces;
int i, ret;
+ int use_isoc;
usb_dbg(usbatm, "%s entered\n", __func__);
return -ENODEV;
}
+ if (!(data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA))) {
+ usb_err(usbatm, "%s: data interface not found!\n", __func__);
+ return -ENODEV;
+ }
+
/* claim all interfaces */
for (i=0; i < num_interfaces; i++) {
instance->usbatm = usbatm;
- /* altsetting may change at any moment, so take a snapshot */
+ /* altsetting and enable_isoc may change at any moment, so take a snapshot */
instance->altsetting = altsetting;
+ use_isoc = enable_isoc;
if (instance->altsetting)
if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) {
instance->altsetting = 0; /* fall back to default */
}
- if (!instance->altsetting) {
- if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ALTSETTING)) < 0) {
- usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ALTSETTING, ret);
- goto fail_free;
+ if (!instance->altsetting && use_isoc)
+ if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) {
+ usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret);
+ use_isoc = 0; /* fall back to bulk */
}
- instance->altsetting = DEFAULT_ALTSETTING;
+
+ if (use_isoc) {
+ const struct usb_host_interface *desc = data_intf->cur_altsetting;
+ const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in;
+ int i;
+
+ use_isoc = 0; /* fall back to bulk if endpoint not found */
+
+ for (i=0; i<desc->desc.bNumEndpoints; i++) {
+ const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
+
+ if ((endpoint_desc->bEndpointAddress == target_address)) {
+ use_isoc = (endpoint_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_ISOC;
+ break;
+ }
+ }
+
+ if (!use_isoc)
+ usb_info(usbatm, "isochronous transfer not supported - using bulk\n");
}
+ if (!use_isoc && !instance->altsetting)
+ if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) {
+ usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret);
+ goto fail_free;
+ }
+
+ if (!instance->altsetting)
+ instance->altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING;
+
+ usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
+
INIT_WORK(&instance->status_checker, (void *)speedtch_check_status, instance);
instance->status_checker.timer.function = speedtch_status_poll;
0x12, 0xc0, 0x07, 0x00,
instance->scratch_buffer + OFFSET_7, SIZE_7, 500);
- usbatm->flags = (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0);
+ usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0);
usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not");
.unbind = speedtch_unbind,
.atm_start = speedtch_atm_start,
.atm_stop = speedtch_atm_stop,
- .in = ENDPOINT_DATA,
- .out = ENDPOINT_DATA
+ .bulk_in = ENDPOINT_BULK_DATA,
+ .bulk_out = ENDPOINT_BULK_DATA,
+ .isoc_in = ENDPOINT_ISOC_DATA
};
static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
init_completion(&instance->thread_exited);
INIT_LIST_HEAD(&instance->vcc_list);
+ skb_queue_head_init(&instance->sndqueue);
usbatm_init_channel(&instance->rx_channel);
usbatm_init_channel(&instance->tx_channel);
tasklet_init(&instance->rx_channel.tasklet, usbatm_rx_process, (unsigned long)instance);
tasklet_init(&instance->tx_channel.tasklet, usbatm_tx_process, (unsigned long)instance);
- instance->rx_channel.endpoint = usb_rcvbulkpipe(usb_dev, driver->in);
- instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->out);
instance->rx_channel.stride = ATM_CELL_SIZE + driver->rx_padding;
instance->tx_channel.stride = ATM_CELL_SIZE + driver->tx_padding;
instance->rx_channel.usbatm = instance->tx_channel.usbatm = instance;
+ if ((instance->flags & UDSL_USE_ISOC) && driver->isoc_in)
+ instance->rx_channel.endpoint = usb_rcvisocpipe(usb_dev, driver->isoc_in);
+ else
+ instance->rx_channel.endpoint = usb_rcvbulkpipe(usb_dev, driver->bulk_in);
+
+ instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->bulk_out);
+
/* tx buffer size must be a positive multiple of the stride */
instance->tx_channel.buf_size = max (instance->tx_channel.stride,
snd_buf_bytes - (snd_buf_bytes % instance->tx_channel.stride));
num_packets--;
instance->rx_channel.buf_size = num_packets * maxpacket;
+ instance->rx_channel.packet_size = maxpacket;
#ifdef DEBUG
for (i = 0; i < 2; i++) {
}
#endif
- skb_queue_head_init(&instance->sndqueue);
+ /* initialize urbs */
for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
- struct urb *urb;
u8 *buffer;
- unsigned int iso_packets = 0, iso_size = 0;
struct usbatm_channel *channel = i < num_rcv_urbs ?
&instance->rx_channel : &instance->tx_channel;
+ struct urb *urb;
+ unsigned int iso_packets = usb_pipeisoc(channel->endpoint) ? channel->buf_size / channel->packet_size : 0;
- if (usb_pipeisoc(channel->endpoint)) {
- /* don't expect iso out endpoints */
- iso_size = usb_maxpacket(instance->usb_dev, channel->endpoint, 0);
- iso_size -= iso_size % channel->stride; /* alignment */
- BUG_ON(!iso_size);
- iso_packets = (channel->buf_size - 1) / iso_size + 1;
- }
+ UDSL_ASSERT(!usb_pipeisoc(channel->endpoint) || usb_pipein(channel->endpoint));
urb = usb_alloc_urb(iso_packets, GFP_KERNEL);
if (!urb) {
urb->transfer_flags = URB_ISO_ASAP;
urb->number_of_packets = iso_packets;
for (j = 0; j < iso_packets; j++) {
- urb->iso_frame_desc[j].offset = iso_size * j;
- urb->iso_frame_desc[j].length = min_t(int, iso_size,
- channel->buf_size - urb->iso_frame_desc[j].offset);
+ urb->iso_frame_desc[j].offset = channel->packet_size * j;
+ urb->iso_frame_desc[j].length = channel->packet_size;
}
}
projects / deliverable / linux.git / commitdiff
