This patch adds multiple device nodes for SPEAr machines and boards.
Signed-off-by: Bhavna Yadav <bhavna.yadav@st.com>
Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Vijay Kumar Mishra <vijay.kumar@st.com>
Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
};
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ label = "wakeup";
+ linux,code = <0x100>;
+ gpios = <&gpio0 7 0x4>;
+ debounce-interval = <20>;
+ gpio-key,wakeup = <1>;
+ };
+ };
+
gmac0: eth@e2000000 {
phy-mode = "gmii";
status = "okay";
spi0: spi@e0100000 {
status = "okay";
+ num-cs = <3>;
+ cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>;
+
+ stmpe610@0 {
+ compatible = "st,stmpe610";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpha;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable;
+ pl022,com-mode = <0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ pl022,ctrl-len = <0x7>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ interrupts = <6 0x4>;
+ interrupt-parent = <&gpio1>;
+ irq-trigger = <0x2>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ ts,sample-time = <4>;
+ ts,mod-12b = <1>;
+ ts,ref-sel = <0>;
+ ts,adc-freq = <1>;
+ ts,ave-ctrl = <1>;
+ ts,touch-det-delay = <2>;
+ ts,settling = <2>;
+ ts,fraction-z = <7>;
+ ts,i-drive = <1>;
+ };
+ };
+
+ m25p80@1 {
+ compatible = "st,m25p80";
+ reg = <1>;
+ spi-max-frequency = <12000000>;
+ spi-cpol;
+ spi-cpha;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable;
+ pl022,com-mode = <0x2>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ pl022,ctrl-len = <0x11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ };
+
+ spidev@2 {
+ compatible = "spidev";
+ reg = <2>;
+ spi-max-frequency = <25000000>;
+ spi-cpha;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable;
+ pl022,com-mode = <0x2>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ pl022,ctrl-len = <0x11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ };
};
wdt@ec800620 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
interrupts = <0 99 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
};
+ ahci@b1000000 {
+ status = "okay";
+ };
+
dma@ea800000 {
status = "okay";
};
status = "okay";
};
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ label = "wakeup";
+ linux,code = <0x100>;
+ gpios = <&gpio1 1 0x4>;
+ debounce-interval = <20>;
+ gpio-key,wakeup = <1>;
+ };
+ };
+
ehci@e5800000 {
status = "okay";
};
+ i2s0: i2s-play@b2400000 {
+ status = "okay";
+ };
+
+ i2s1: i2s-rec@b2000000 {
+ status = "okay";
+ };
+
+ incodec: dir-hifi {
+ compatible = "dummy,dir-hifi";
+ status = "okay";
+ };
+
ohci@e4000000 {
status = "okay";
};
status = "okay";
};
+ outcodec: dit-hifi {
+ compatible = "dummy,dit-hifi";
+ status = "okay";
+ };
+
+ sound {
+ compatible = "spear,spear-evb";
+ audio-controllers = <&spdif0 &spdif1 &i2s0 &i2s1>;
+ audio-codecs = <&incodec &outcodec &sta529 &sta529>;
+ codec_dai_name = "dir-hifi", "dit-hifi", "sta529-audio", "sta529-audio";
+ stream_name = "spdif-cap", "spdif-play", "i2s-play", "i2s-cap";
+ dai_name = "spdifin-pcm", "spdifout-pcm", "i2s0-pcm", "i2s1-pcm";
+ nr_controllers = <4>;
+ status = "okay";
+ };
+
+ spdif0: spdif-in@d0100000 {
+ status = "okay";
+ };
+
+ spdif1: spdif-out@d0000000 {
+ status = "okay";
+ };
+
apb {
adc@e0080000 {
status = "okay";
};
+ i2s-play@b2400000 {
+ status = "okay";
+ };
+
+ i2s-rec@b2000000 {
+ status = "okay";
+ };
+
gpio0: gpio@e0600000 {
status = "okay";
};
i2c0: i2c@e0280000 {
status = "okay";
+
+ sta529: sta529@1a {
+ compatible = "st,sta529";
+ reg = <0x1a>;
+ };
};
i2c1: i2c@b4000000 {
status = "okay";
+
+ eeprom0@56 {
+ compatible = "st,eeprom";
+ reg = <0x56>;
+ };
+
+ stmpe801@41 {
+ compatible = "st,stmpe801";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x41>;
+ interrupts = <4 0x4>;
+ interrupt-parent = <&gpio0>;
+ irq-trigger = <0x2>;
+
+ stmpegpio: stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
};
kbd@e0300000 {
spi0: spi@e0100000 {
status = "okay";
+ num-cs = <3>;
+ cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>,
+ <&gpiopinctrl 85 0>;
+
+ m25p80@0 {
+ compatible = "m25p80";
+ reg = <0>;
+ spi-max-frequency = <12000000>;
+ spi-cpol;
+ spi-cpha;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable;
+ pl022,com-mode = <0x2>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ pl022,ctrl-len = <0x11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ };
+
+ stmpe610@1 {
+ compatible = "st,stmpe610";
+ spi-max-frequency = <1000000>;
+ spi-cpha;
+ reg = <1>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable;
+ pl022,com-mode = <0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ pl022,ctrl-len = <0x7>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ interrupts = <100 0>;
+ interrupt-parent = <&gpiopinctrl>;
+ irq-trigger = <0x2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ ts,sample-time = <4>;
+ ts,mod-12b = <1>;
+ ts,ref-sel = <0>;
+ ts,adc-freq = <1>;
+ ts,ave-ctrl = <1>;
+ ts,touch-det-delay = <2>;
+ ts,settling = <2>;
+ ts,fraction-z = <7>;
+ ts,i-drive = <1>;
+ };
+ };
+
+ spidev@2 {
+ compatible = "spidev";
+ reg = <2>;
+ spi-max-frequency = <25000000>;
+ spi-cpha;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,slave-tx-disable;
+ pl022,com-mode = <0x2>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ pl022,ctrl-len = <0x11>;
+ pl022,wait-state = <0>;
+ pl022,duplex = <0>;
+ };
+ };
+
+ timer@ec800600 {
+ status = "okay";
};
wdt@ec800620 {
status = "disabled";
};
+ i2s-play@b2400000 {
+ compatible = "snps,designware-i2s";
+ reg = <0xb2400000 0x10000>;
+ interrupt-names = "play_irq";
+ interrupts = <0 98 0x4
+ 0 99 0x4>;
+ play;
+ channel = <8>;
+ status = "disabled";
+ };
+
+ i2s-rec@b2000000 {
+ compatible = "snps,designware-i2s";
+ reg = <0xb2000000 0x10000>;
+ interrupt-names = "record_irq";
+ interrupts = <0 100 0x4
+ 0 101 0x4>;
+ record;
+ channel = <8>;
+ status = "disabled";
+ };
+
pinmux: pinmux@e0700000 {
compatible = "st,spear1340-pinmux";
reg = <0xe0700000 0x1000>;
#gpio-range-cells = <2>;
};
+ pwm: pwm@e0180000 {
+ compatible ="st,spear13xx-pwm";
+ reg = <0xe0180000 0x1000>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ spdif-in@d0100000 {
+ compatible = "st,spdif-in";
+ reg = < 0xd0100000 0x20000
+ 0xd0110000 0x10000 >;
+ interrupts = <0 84 0x4>;
+ status = "disabled";
+ };
+
+ spdif-out@d0000000 {
+ compatible = "st,spdif-out";
+ reg = <0xd0000000 0x20000>;
+ interrupts = <0 85 0x4>;
+ status = "disabled";
+ };
+
spi1: spi@5d400000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x5d400000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 99 0x4>;
status = "disabled";
};
bootargs = "console=ttyAMA0,115200";
};
+ cpufreq {
+ compatible = "st,cpufreq-spear";
+ cpufreq_tbl = < 166000
+ 200000
+ 250000
+ 300000
+ 400000
+ 500000
+ 600000 >;
+ status = "disable";
+ };
+
ahb {
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
+ pcm {
+ compatible = "st,pcm-audio";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ status = "disable";
+ };
+
smi: flash@ea000000 {
compatible = "st,spear600-smi";
#address-cells = <1>;
status = "disabled";
};
+ i2s@e0180000 {
+ compatible = "st,designware-i2s";
+ reg = <0xe0180000 0x1000>;
+ interrupt-names = "play_irq", "record_irq";
+ interrupts = <0 10 0x4
+ 0 11 0x4 >;
+ status = "disabled";
+ };
+
+ i2s@e0200000 {
+ compatible = "st,designware-i2s";
+ reg = <0xe0200000 0x1000>;
+ interrupt-names = "play_irq", "record_irq";
+ interrupts = <0 26 0x4
+ 0 53 0x4>;
+ status = "disabled";
+ };
+
spi0: spi@e0100000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xe0100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 31 0x4>;
status = "disabled";
};
spi1: spi@a5000000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xa5000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
spi2: spi@a6000000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xa6000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
+ pwm: pwm@a8000000 {
+ compatible ="st,spear-pwm";
+ reg = <0xa8000000 0x1000>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
apb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "arm,pl022", "arm,primecell";
reg = <0xd0100000 0x1000>;
interrupts = <20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
};
ahb {
+ clcd@fc200000 {
+ status = "okay";
+ };
+
dma@fc400000 {
status = "okay";
};
+ ehci@e1800000 {
+ status = "okay";
+ };
+
+ ehci@e2000000 {
+ status = "okay";
+ };
+
gmac: ethernet@e0800000 {
phy-mode = "gmii";
status = "okay";
};
+ ohci@e1900000 {
+ status = "okay";
+ };
+
+ ohci@e2100000 {
+ status = "okay";
+ };
+
smi: flash@fc000000 {
status = "okay";
clock-rate=<50000000>;
pinctrl-0 = <>;
};
+ rtc@fc900000 {
+ status = "okay";
+ };
+
i2c@d0200000 {
clock-frequency = <400000>;
status = "okay";
#interrupt-cells = <1>;
};
+ clcd@fc200000 {
+ compatible = "arm,pl110", "arm,primecell";
+ reg = <0xfc200000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <12>;
+ status = "disabled";
+ };
+
dma@fc400000 {
compatible = "arm,pl080", "arm,primecell";
reg = <0xfc400000 0x1000>;
status = "disabled";
};
+ rtc@fc900000 {
+ compatible = "st,spear600-rtc";
+ reg = <0xfc900000 0x1000>;
+ interrupts = <10>;
+ status = "disabled";
+ };
+
timer@f0000000 {
compatible = "st,spear-timer";
reg = <0xf0000000 0x400>;
projects / deliverable / linux.git / commitdiff
