MIPS: Alchemy: Fix PCI PM
authorManuel Lauss <manuel.lauss@googlemail.com>
Wed, 16 Nov 2011 14:42:28 +0000 (15:42 +0100)
committerRalf Baechle <ralf@linux-mips.org>
Wed, 7 Dec 2011 22:01:45 +0000 (22:01 +0000)
Move PCI Controller PM to syscore_ops since the platform_driver PM methods
are called way too late on resume and far too early on suspend (after and
before PCI device resume/suspend).
This also allows to simplify wired entry management a bit.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3007/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/pci/pci-alchemy.c

index b5ce041cdafb54667b7c11738892ab7e9020000a..b5eddf533c0be36f4e384dbb8bd2372fb85802b6 100644 (file)
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/syscore_ops.h>
 #include <linux/vmalloc.h>
 
 #include <asm/mach-au1x00/au1000.h>
@@ -41,6 +42,12 @@ struct alchemy_pci_context {
        int (*board_pci_idsel)(unsigned int devsel, int assert);
 };
 
+/* for syscore_ops. There's only one PCI controller on Alchemy chips, so this
+ * should suffice for now.
+ */
+static struct alchemy_pci_context *__alchemy_pci_ctx;
+
+
 /* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr
  * in arch/mips/alchemy/common/setup.c
  */
@@ -99,18 +106,6 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
                return -1;
        }
 
-       /* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired
-        * on resume, clearing our wired entry.  Unfortunately the ->resume()
-        * callback is called way way way too late (and ->suspend() too early)
-        * to have them destroy and recreate it.  Instead just test if c0_wired
-        * is now lower than the index we retrieved before suspending and then
-        * recreate the entry if necessary.  Of course this is totally bonkers
-        * and breaks as soon as someone else adds another wired entry somewhere
-        * else.  Anyone have any ideas how to handle this better?
-        */
-       if (unlikely(read_c0_wired() < ctx->wired_entry))
-               alchemy_pci_wired_entry(ctx);
-
        local_irq_save(flags);
        r = __raw_readl(ctx->regs + PCI_REG_STATCMD) & 0x0000ffff;
        r |= PCI_STATCMD_STATUS(0x2000);
@@ -304,6 +299,62 @@ static int alchemy_pci_def_idsel(unsigned int devsel, int assert)
        return 1;       /* success */
 }
 
+/* save PCI controller register contents. */
+static int alchemy_pci_suspend(void)
+{
+       struct alchemy_pci_context *ctx = __alchemy_pci_ctx;
+       if (!ctx)
+               return 0;
+
+       ctx->pm[0]  = __raw_readl(ctx->regs + PCI_REG_CMEM);
+       ctx->pm[1]  = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff;
+       ctx->pm[2]  = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH);
+       ctx->pm[3]  = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID);
+       ctx->pm[4]  = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID);
+       ctx->pm[5]  = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV);
+       ctx->pm[6]  = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL);
+       ctx->pm[7]  = __raw_readl(ctx->regs + PCI_REG_ID);
+       ctx->pm[8]  = __raw_readl(ctx->regs + PCI_REG_CLASSREV);
+       ctx->pm[9]  = __raw_readl(ctx->regs + PCI_REG_PARAM);
+       ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR);
+       ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT);
+
+       return 0;
+}
+
+static void alchemy_pci_resume(void)
+{
+       struct alchemy_pci_context *ctx = __alchemy_pci_ctx;
+       if (!ctx)
+               return;
+
+       __raw_writel(ctx->pm[0],  ctx->regs + PCI_REG_CMEM);
+       __raw_writel(ctx->pm[2],  ctx->regs + PCI_REG_B2BMASK_CCH);
+       __raw_writel(ctx->pm[3],  ctx->regs + PCI_REG_B2BBASE0_VID);
+       __raw_writel(ctx->pm[4],  ctx->regs + PCI_REG_B2BBASE1_SID);
+       __raw_writel(ctx->pm[5],  ctx->regs + PCI_REG_MWMASK_DEV);
+       __raw_writel(ctx->pm[6],  ctx->regs + PCI_REG_MWBASE_REV_CCL);
+       __raw_writel(ctx->pm[7],  ctx->regs + PCI_REG_ID);
+       __raw_writel(ctx->pm[8],  ctx->regs + PCI_REG_CLASSREV);
+       __raw_writel(ctx->pm[9],  ctx->regs + PCI_REG_PARAM);
+       __raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR);
+       __raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT);
+       wmb();
+       __raw_writel(ctx->pm[1],  ctx->regs + PCI_REG_CONFIG);
+       wmb();
+
+       /* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired
+        * on resume, making it necessary to recreate it as soon as possible.
+        */
+       ctx->wired_entry = 8191;        /* impossibly high value */
+       alchemy_pci_wired_entry(ctx);   /* install it */
+}
+
+static struct syscore_ops alchemy_pci_pmops = {
+       .suspend        = alchemy_pci_suspend,
+       .resume         = alchemy_pci_resume,
+};
+
 static int __devinit alchemy_pci_probe(struct platform_device *pdev)
 {
        struct alchemy_pci_platdata *pd = pdev->dev.platform_data;
@@ -396,7 +447,8 @@ static int __devinit alchemy_pci_probe(struct platform_device *pdev)
                ret = -ENOMEM;
                goto out4;
        }
-       ctx->wired_entry = 8192;        /* impossibly high value */
+       ctx->wired_entry = 8191;        /* impossibly high value */
+       alchemy_pci_wired_entry(ctx);   /* install it */
 
        set_io_port_base((unsigned long)ctx->alchemy_pci_ctrl.io_map_base);
 
@@ -408,7 +460,9 @@ static int __devinit alchemy_pci_probe(struct platform_device *pdev)
        __raw_writel(val, ctx->regs + PCI_REG_CONFIG);
        wmb();
 
+       __alchemy_pci_ctx = ctx;
        platform_set_drvdata(pdev, ctx);
+       register_syscore_ops(&alchemy_pci_pmops);
        register_pci_controller(&ctx->alchemy_pci_ctrl);
 
        return 0;
@@ -425,68 +479,11 @@ out:
        return ret;
 }
 
-
-#ifdef CONFIG_PM
-/* save PCI controller register contents. */
-static int alchemy_pci_suspend(struct device *dev)
-{
-       struct alchemy_pci_context *ctx = dev_get_drvdata(dev);
-
-       ctx->pm[0]  = __raw_readl(ctx->regs + PCI_REG_CMEM);
-       ctx->pm[1]  = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff;
-       ctx->pm[2]  = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH);
-       ctx->pm[3]  = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID);
-       ctx->pm[4]  = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID);
-       ctx->pm[5]  = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV);
-       ctx->pm[6]  = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL);
-       ctx->pm[7]  = __raw_readl(ctx->regs + PCI_REG_ID);
-       ctx->pm[8]  = __raw_readl(ctx->regs + PCI_REG_CLASSREV);
-       ctx->pm[9]  = __raw_readl(ctx->regs + PCI_REG_PARAM);
-       ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR);
-       ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT);
-
-       return 0;
-}
-
-static int alchemy_pci_resume(struct device *dev)
-{
-       struct alchemy_pci_context *ctx = dev_get_drvdata(dev);
-
-       __raw_writel(ctx->pm[0],  ctx->regs + PCI_REG_CMEM);
-       __raw_writel(ctx->pm[2],  ctx->regs + PCI_REG_B2BMASK_CCH);
-       __raw_writel(ctx->pm[3],  ctx->regs + PCI_REG_B2BBASE0_VID);
-       __raw_writel(ctx->pm[4],  ctx->regs + PCI_REG_B2BBASE1_SID);
-       __raw_writel(ctx->pm[5],  ctx->regs + PCI_REG_MWMASK_DEV);
-       __raw_writel(ctx->pm[6],  ctx->regs + PCI_REG_MWBASE_REV_CCL);
-       __raw_writel(ctx->pm[7],  ctx->regs + PCI_REG_ID);
-       __raw_writel(ctx->pm[8],  ctx->regs + PCI_REG_CLASSREV);
-       __raw_writel(ctx->pm[9],  ctx->regs + PCI_REG_PARAM);
-       __raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR);
-       __raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT);
-       wmb();
-       __raw_writel(ctx->pm[1],  ctx->regs + PCI_REG_CONFIG);
-       wmb();
-
-       return 0;
-}
-
-static const struct dev_pm_ops alchemy_pci_pmops = {
-       .suspend        = alchemy_pci_suspend,
-       .resume         = alchemy_pci_resume,
-};
-
-#define ALCHEMY_PCICTL_PM      (&alchemy_pci_pmops)
-
-#else
-#define ALCHEMY_PCICTL_PM      NULL
-#endif
-
 static struct platform_driver alchemy_pcictl_driver = {
        .probe          = alchemy_pci_probe,
        .driver = {
                .name   = "alchemy-pci",
                .owner  = THIS_MODULE,
-               .pm     = ALCHEMY_PCICTL_PM,
        },
 };
 
This page took 0.026884 seconds and 5 git commands to generate.