#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/platform_data/pinctrl-nomadik.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/devices.h>
#include <mach/hardware.h>
#include <linux/amba/mmci.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <asm/mach-types.h>
-#include <plat/ste_dma40.h>
#include <mach/devices.h>
#include <mach/hardware.h>
#include <linux/leds.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
-#include <plat/ste_dma40.h>
-
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include <linux/gpio.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#ifndef __MSP_H
#define __MSP_H
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
enum msp_i2s_id {
MSP_I2S_0 = 0,
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_data/usb-musb-ux500.h>
+#include <linux/platform_data/dma-ste-dma40.h>
-#include <plat/ste_dma40.h>
#include <mach/hardware.h>
-#include <linux/platform_data/usb-musb-ux500.h>
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2007-2010
- * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-
-#ifndef STE_DMA40_H
-#define STE_DMA40_H
-
-#include <linux/dmaengine.h>
-#include <linux/scatterlist.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-
-/*
- * Maxium size for a single dma descriptor
- * Size is limited to 16 bits.
- * Size is in the units of addr-widths (1,2,4,8 bytes)
- * Larger transfers will be split up to multiple linked desc
- */
-#define STEDMA40_MAX_SEG_SIZE 0xFFFF
-
-/* dev types for memcpy */
-#define STEDMA40_DEV_DST_MEMORY (-1)
-#define STEDMA40_DEV_SRC_MEMORY (-1)
-
-enum stedma40_mode {
- STEDMA40_MODE_LOGICAL = 0,
- STEDMA40_MODE_PHYSICAL,
- STEDMA40_MODE_OPERATION,
-};
-
-enum stedma40_mode_opt {
- STEDMA40_PCHAN_BASIC_MODE = 0,
- STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0,
- STEDMA40_PCHAN_MODULO_MODE,
- STEDMA40_PCHAN_DOUBLE_DST_MODE,
- STEDMA40_LCHAN_SRC_PHY_DST_LOG,
- STEDMA40_LCHAN_SRC_LOG_DST_PHY,
-};
-
-#define STEDMA40_ESIZE_8_BIT 0x0
-#define STEDMA40_ESIZE_16_BIT 0x1
-#define STEDMA40_ESIZE_32_BIT 0x2
-#define STEDMA40_ESIZE_64_BIT 0x3
-
-/* The value 4 indicates that PEN-reg shall be set to 0 */
-#define STEDMA40_PSIZE_PHY_1 0x4
-#define STEDMA40_PSIZE_PHY_2 0x0
-#define STEDMA40_PSIZE_PHY_4 0x1
-#define STEDMA40_PSIZE_PHY_8 0x2
-#define STEDMA40_PSIZE_PHY_16 0x3
-
-/*
- * The number of elements differ in logical and
- * physical mode
- */
-#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2
-#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4
-#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8
-#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
-
-/* Maximum number of possible physical channels */
-#define STEDMA40_MAX_PHYS 32
-
-enum stedma40_flow_ctrl {
- STEDMA40_NO_FLOW_CTRL,
- STEDMA40_FLOW_CTRL,
-};
-
-enum stedma40_periph_data_width {
- STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
- STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
- STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
- STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
-};
-
-enum stedma40_xfer_dir {
- STEDMA40_MEM_TO_MEM = 1,
- STEDMA40_MEM_TO_PERIPH,
- STEDMA40_PERIPH_TO_MEM,
- STEDMA40_PERIPH_TO_PERIPH
-};
-
-
-/**
- * struct stedma40_chan_cfg - dst/src channel configuration
- *
- * @big_endian: true if the src/dst should be read as big endian
- * @data_width: Data width of the src/dst hardware
- * @p_size: Burst size
- * @flow_ctrl: Flow control on/off.
- */
-struct stedma40_half_channel_info {
- bool big_endian;
- enum stedma40_periph_data_width data_width;
- int psize;
- enum stedma40_flow_ctrl flow_ctrl;
-};
-
-/**
- * struct stedma40_chan_cfg - Structure to be filled by client drivers.
- *
- * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
- * @high_priority: true if high-priority
- * @realtime: true if realtime mode is to be enabled. Only available on DMA40
- * version 3+, i.e DB8500v2+
- * @mode: channel mode: physical, logical, or operation
- * @mode_opt: options for the chosen channel mode
- * @src_dev_type: Src device type
- * @dst_dev_type: Dst device type
- * @src_info: Parameters for dst half channel
- * @dst_info: Parameters for dst half channel
- * @use_fixed_channel: if true, use physical channel specified by phy_channel
- * @phy_channel: physical channel to use, only if use_fixed_channel is true
- *
- * This structure has to be filled by the client drivers.
- * It is recommended to do all dma configurations for clients in the machine.
- *
- */
-struct stedma40_chan_cfg {
- enum stedma40_xfer_dir dir;
- bool high_priority;
- bool realtime;
- enum stedma40_mode mode;
- enum stedma40_mode_opt mode_opt;
- int src_dev_type;
- int dst_dev_type;
- struct stedma40_half_channel_info src_info;
- struct stedma40_half_channel_info dst_info;
-
- bool use_fixed_channel;
- int phy_channel;
-};
-
-/**
- * struct stedma40_platform_data - Configuration struct for the dma device.
- *
- * @dev_len: length of dev_tx and dev_rx
- * @dev_tx: mapping between destination event line and io address
- * @dev_rx: mapping between source event line and io address
- * @memcpy: list of memcpy event lines
- * @memcpy_len: length of memcpy
- * @memcpy_conf_phy: default configuration of physical channel memcpy
- * @memcpy_conf_log: default configuration of logical channel memcpy
- * @disabled_channels: A vector, ending with -1, that marks physical channels
- * that are for different reasons not available for the driver.
- */
-struct stedma40_platform_data {
- u32 dev_len;
- const dma_addr_t *dev_tx;
- const dma_addr_t *dev_rx;
- int *memcpy;
- u32 memcpy_len;
- struct stedma40_chan_cfg *memcpy_conf_phy;
- struct stedma40_chan_cfg *memcpy_conf_log;
- int disabled_channels[STEDMA40_MAX_PHYS];
- bool use_esram_lcla;
-};
-
-#ifdef CONFIG_STE_DMA40
-
-/**
- * stedma40_filter() - Provides stedma40_chan_cfg to the
- * ste_dma40 dma driver via the dmaengine framework.
- * does some checking of what's provided.
- *
- * Never directly called by client. It used by dmaengine.
- * @chan: dmaengine handle.
- * @data: Must be of type: struct stedma40_chan_cfg and is
- * the configuration of the framework.
- *
- *
- */
-
-bool stedma40_filter(struct dma_chan *chan, void *data);
-
-/**
- * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
- * (=device)
- *
- * @chan: dmaengine handle
- * @addr: source or destination physicall address.
- * @size: bytes to transfer
- * @direction: direction of transfer
- * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
- */
-
-static inline struct
-dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
- dma_addr_t addr,
- unsigned int size,
- enum dma_transfer_direction direction,
- unsigned long flags)
-{
- struct scatterlist sg;
- sg_init_table(&sg, 1);
- sg.dma_address = addr;
- sg.length = size;
-
- return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags);
-}
-
-#else
-static inline bool stedma40_filter(struct dma_chan *chan, void *data)
-{
- return false;
-}
-
-static inline struct
-dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
- dma_addr_t addr,
- unsigned int size,
- enum dma_transfer_direction direction,
- unsigned long flags)
-{
- return NULL;
-}
-#endif
-
-#endif
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/semaphore.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <crypto/aes.h>
#include <crypto/algapi.h>
#include <crypto/des.h>
#include <crypto/scatterwalk.h>
-#include <plat/ste_dma40.h>
-
#include <linux/platform_data/crypto-ux500.h>
#include <mach/hardware.h>
#include <linux/err.h>
#include <linux/amba/bus.h>
#include <linux/regulator/consumer.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include "dmaengine.h"
#include "ste_dma40_ll.h"
*/
#include <linux/kernel.h>
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include "ste_dma40_ll.h"
#ifndef _CRYPTO_UX500_H
#define _CRYPTO_UX500_H
#include <linux/dmaengine.h>
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
struct hash_platform_data {
void *mem_to_engine;
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2007-2010
+ * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+
+#ifndef STE_DMA40_H
+#define STE_DMA40_H
+
+#include <linux/dmaengine.h>
+#include <linux/scatterlist.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+
+/*
+ * Maxium size for a single dma descriptor
+ * Size is limited to 16 bits.
+ * Size is in the units of addr-widths (1,2,4,8 bytes)
+ * Larger transfers will be split up to multiple linked desc
+ */
+#define STEDMA40_MAX_SEG_SIZE 0xFFFF
+
+/* dev types for memcpy */
+#define STEDMA40_DEV_DST_MEMORY (-1)
+#define STEDMA40_DEV_SRC_MEMORY (-1)
+
+enum stedma40_mode {
+ STEDMA40_MODE_LOGICAL = 0,
+ STEDMA40_MODE_PHYSICAL,
+ STEDMA40_MODE_OPERATION,
+};
+
+enum stedma40_mode_opt {
+ STEDMA40_PCHAN_BASIC_MODE = 0,
+ STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0,
+ STEDMA40_PCHAN_MODULO_MODE,
+ STEDMA40_PCHAN_DOUBLE_DST_MODE,
+ STEDMA40_LCHAN_SRC_PHY_DST_LOG,
+ STEDMA40_LCHAN_SRC_LOG_DST_PHY,
+};
+
+#define STEDMA40_ESIZE_8_BIT 0x0
+#define STEDMA40_ESIZE_16_BIT 0x1
+#define STEDMA40_ESIZE_32_BIT 0x2
+#define STEDMA40_ESIZE_64_BIT 0x3
+
+/* The value 4 indicates that PEN-reg shall be set to 0 */
+#define STEDMA40_PSIZE_PHY_1 0x4
+#define STEDMA40_PSIZE_PHY_2 0x0
+#define STEDMA40_PSIZE_PHY_4 0x1
+#define STEDMA40_PSIZE_PHY_8 0x2
+#define STEDMA40_PSIZE_PHY_16 0x3
+
+/*
+ * The number of elements differ in logical and
+ * physical mode
+ */
+#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2
+#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4
+#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8
+#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
+
+/* Maximum number of possible physical channels */
+#define STEDMA40_MAX_PHYS 32
+
+enum stedma40_flow_ctrl {
+ STEDMA40_NO_FLOW_CTRL,
+ STEDMA40_FLOW_CTRL,
+};
+
+enum stedma40_periph_data_width {
+ STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
+ STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
+ STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
+ STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
+};
+
+enum stedma40_xfer_dir {
+ STEDMA40_MEM_TO_MEM = 1,
+ STEDMA40_MEM_TO_PERIPH,
+ STEDMA40_PERIPH_TO_MEM,
+ STEDMA40_PERIPH_TO_PERIPH
+};
+
+
+/**
+ * struct stedma40_chan_cfg - dst/src channel configuration
+ *
+ * @big_endian: true if the src/dst should be read as big endian
+ * @data_width: Data width of the src/dst hardware
+ * @p_size: Burst size
+ * @flow_ctrl: Flow control on/off.
+ */
+struct stedma40_half_channel_info {
+ bool big_endian;
+ enum stedma40_periph_data_width data_width;
+ int psize;
+ enum stedma40_flow_ctrl flow_ctrl;
+};
+
+/**
+ * struct stedma40_chan_cfg - Structure to be filled by client drivers.
+ *
+ * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
+ * @high_priority: true if high-priority
+ * @realtime: true if realtime mode is to be enabled. Only available on DMA40
+ * version 3+, i.e DB8500v2+
+ * @mode: channel mode: physical, logical, or operation
+ * @mode_opt: options for the chosen channel mode
+ * @src_dev_type: Src device type
+ * @dst_dev_type: Dst device type
+ * @src_info: Parameters for dst half channel
+ * @dst_info: Parameters for dst half channel
+ * @use_fixed_channel: if true, use physical channel specified by phy_channel
+ * @phy_channel: physical channel to use, only if use_fixed_channel is true
+ *
+ * This structure has to be filled by the client drivers.
+ * It is recommended to do all dma configurations for clients in the machine.
+ *
+ */
+struct stedma40_chan_cfg {
+ enum stedma40_xfer_dir dir;
+ bool high_priority;
+ bool realtime;
+ enum stedma40_mode mode;
+ enum stedma40_mode_opt mode_opt;
+ int src_dev_type;
+ int dst_dev_type;
+ struct stedma40_half_channel_info src_info;
+ struct stedma40_half_channel_info dst_info;
+
+ bool use_fixed_channel;
+ int phy_channel;
+};
+
+/**
+ * struct stedma40_platform_data - Configuration struct for the dma device.
+ *
+ * @dev_len: length of dev_tx and dev_rx
+ * @dev_tx: mapping between destination event line and io address
+ * @dev_rx: mapping between source event line and io address
+ * @memcpy: list of memcpy event lines
+ * @memcpy_len: length of memcpy
+ * @memcpy_conf_phy: default configuration of physical channel memcpy
+ * @memcpy_conf_log: default configuration of logical channel memcpy
+ * @disabled_channels: A vector, ending with -1, that marks physical channels
+ * that are for different reasons not available for the driver.
+ */
+struct stedma40_platform_data {
+ u32 dev_len;
+ const dma_addr_t *dev_tx;
+ const dma_addr_t *dev_rx;
+ int *memcpy;
+ u32 memcpy_len;
+ struct stedma40_chan_cfg *memcpy_conf_phy;
+ struct stedma40_chan_cfg *memcpy_conf_log;
+ int disabled_channels[STEDMA40_MAX_PHYS];
+ bool use_esram_lcla;
+};
+
+#ifdef CONFIG_STE_DMA40
+
+/**
+ * stedma40_filter() - Provides stedma40_chan_cfg to the
+ * ste_dma40 dma driver via the dmaengine framework.
+ * does some checking of what's provided.
+ *
+ * Never directly called by client. It used by dmaengine.
+ * @chan: dmaengine handle.
+ * @data: Must be of type: struct stedma40_chan_cfg and is
+ * the configuration of the framework.
+ *
+ *
+ */
+
+bool stedma40_filter(struct dma_chan *chan, void *data);
+
+/**
+ * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
+ * (=device)
+ *
+ * @chan: dmaengine handle
+ * @addr: source or destination physicall address.
+ * @size: bytes to transfer
+ * @direction: direction of transfer
+ * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
+ */
+
+static inline struct
+dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
+ dma_addr_t addr,
+ unsigned int size,
+ enum dma_transfer_direction direction,
+ unsigned long flags)
+{
+ struct scatterlist sg;
+ sg_init_table(&sg, 1);
+ sg.dma_address = addr;
+ sg.length = size;
+
+ return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags);
+}
+
+#else
+static inline bool stedma40_filter(struct dma_chan *chan, void *data)
+{
+ return false;
+}
+
+static inline struct
+dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
+ dma_addr_t addr,
+ unsigned int size,
+ enum dma_transfer_direction direction,
+ unsigned long flags)
+{
+ return NULL;
+}
+#endif
+
+#endif
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/slab.h>
-
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
projects / deliverable / linux.git / commitdiff
