ARM: at91: debug: add default DEBUG_LL addresses

Add configuration options for the most commonly used UART physical and
virtual addresses to ease the use of DEBUG_LL and earlyprintk.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 2609491f4ab1eaeea66d4b30e542f6c252dca54e..ba4003e687ac5cf39c4020a94864ec8879bfb757 100644 (file)
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -109,23 +109,41 @@ choice
                    0x80020000      | 0xf0020000     | UART8
                    0x80024000      | 0xf0024000     | UART9
 
-       config DEBUG_AT91_UART
-               bool "Kernel low-level debugging on Atmel SoCs"
-               depends on ARCH_AT91
+       config DEBUG_AT91_RM9200_DBGU
+               bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
+               select DEBUG_AT91_UART
+               depends on SOC_AT91RM9200 || SOC_AT91SAM9
                help
-                 Say Y here if you want the debug print routines to direct
-                 their output to the serial port on atmel devices.
+                 Say Y here if you want kernel low-level debugging support
+                 on the DBGU port of:
+                   at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
+                   at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
 
-                 SOC                  DEBUG_UART_PHYS   DEBUG_UART_VIRT  PORT
-                 rm9200, 9260/9g20,   0xfffff200        0xf8fff200       DBGU
-                 9261/9g10, 9rl
-                 9263, 9g45, sama5d3  0xffffee00        0xf8ffee00       DBGU
-                 sama5d4              0xfc00c000        0xfb00c000       USART3
-                 sama5d4              0xfc069000        0xfb069000       DBGU
-                 sama5d2              0xf8020000        0xf7020000       UART1
+       config DEBUG_AT91_SAM9263_DBGU
+               bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
+               select DEBUG_AT91_UART
+               depends on SOC_AT91SAM9 || SOC_SAMA5D3
+               help
+                 Say Y here if you want kernel low-level debugging support
+                 on the DBGU port of:
+                   at91sam9263, at91sam9g45, at91sam9m10,
+                   sama5d3
 
-                 Please adjust DEBUG_UART_PHYS and DEBUG_UART_VIRT
-                 configuration options based on your needs.
+       config DEBUG_AT91_SAMA5D2_UART1
+               bool "Kernel low-level debugging on SAMA5D2 UART1"
+               select DEBUG_AT91_UART
+               depends on SOC_SAMA5D2
+               help
+                 Say Y here if you want kernel low-level debugging support
+                 on the UART1 port of sama5d2.
+
+       config DEBUG_AT91_SAMA5D4_USART3
+               bool "Kernel low-level debugging on SAMA5D4 USART3"
+               select DEBUG_AT91_UART
+               depends on SOC_SAMA5D4
+               help
+                 Say Y here if you want kernel low-level debugging support
+                 on the USART3 port of sama5d4.
 
        config DEBUG_BCM2835
                bool "Kernel low-level debugging on BCM2835 PL011 UART"
@@ -1296,6 +1314,10 @@ choice
 
 endchoice
 
+config DEBUG_AT91_UART
+       bool
+       depends on ARCH_AT91
+
 config DEBUG_EXYNOS_UART
        bool
 
@@ -1502,8 +1524,10 @@ config DEBUG_UART_PHYS
        default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
        default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
        default 0xf7fc9000 if DEBUG_BERLIN_UART
+       default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1
        default 0xf8b00000 if DEBUG_HIX5HD2_UART
        default 0xf991e000 if DEBUG_QCOM_UARTDM
+       default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
        default 0xfcb00000 if DEBUG_HI3620_UART
        default 0xfd883000 if DEBUG_ALPINE_UART0
        default 0xfe800000 if ARCH_IOP32X
@@ -1518,6 +1542,8 @@ config DEBUG_UART_PHYS
        default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
        default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
        default 0xfffe8600 if DEBUG_BCM63XX_UART
+       default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
+       default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
        default 0xfffff700 if ARCH_IOP33X
        depends on ARCH_EP93XX || \
                DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1566,13 +1592,17 @@ config DEBUG_UART_VIRT
                                DEBUG_S3C2410_UART1)
        default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
                                DEBUG_S3C2410_UART2)
+       default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
        default 0xf7fc9000 if DEBUG_BERLIN_UART
        default 0xf8007000 if DEBUG_HIP04_UART
        default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
        default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+       default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
+       default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
        default 0xfa71e000 if DEBUG_QCOM_UARTDM
        default 0xfb002000 if DEBUG_CNS3XXX
        default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
+       default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
        default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
        default 0xfc40ab00 if DEBUG_BRCMSTB_UART
        default 0xfc705000 if DEBUG_ZTE_ZX