ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts

This results in quite a nice cleanup for this dts file.

As an added bonus this also enables backlight, regulator and full otg
support. I've tested that all these works as advertised.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
index 1aefc6793e25e330dea05befe8306fc22651ad26..65660324005c703718fa98946d45c890a5c5c69b 100644 (file)
--- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
@@ -42,59 +42,18 @@
 
 /dts-v1/;
 #include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun8i-reference-design-tablet.dtsi"
 
 / {
        model = "Allwinner GA10H Quad Core Tablet (v1.1)";
        compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33";
-
-       aliases {
-               serial0 = &r_uart;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
 };
 
 &ehci0 {
        status = "okay";
 };
 
-&i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
-       status = "okay";
-};
-
-&i2c1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c1_pins_a>;
-       status = "okay";
-};
-
 &lradc {
-       vref-supply = <&reg_vcc3v0>;
-       status = "okay";
-
-       button@200 {
-               label = "Volume Up";
-               linux,code = <KEY_VOLUMEUP>;
-               channel = <0>;
-               voltage = <200000>;
-       };
-
-       button@400 {
-               label = "Volume Down";
-               linux,code = <KEY_VOLUMEDOWN>;
-               channel = <0>;
-               voltage = <400000>;
-       };
-
        button@600 {
                label = "Back";
                linux,code = <KEY_BACK>;
@@ -103,40 +62,6 @@
        };
 };
 
-&mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
-       vmmc-supply = <&reg_vcc3v0>;
-       bus-width = <4>;
-       cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-       cd-inverted;
-       status = "okay";
-};
-
 &ohci0 {
        status = "okay";
 };
-
-&pio {
-       mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
-               allwinner,pins = "PB4";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-       };
-};
-
-&r_uart {
-       pinctrl-names = "default";
-       pinctrl-0 = <&r_uart_pins_a>;
-       status = "okay";
-};
-
-&usb_otg {
-       dr_mode = "host";
-       status = "okay";
-};
-
-&usbphy {
-       status = "okay";
-};