/*
* Mars MR97310A library
*
+ * The original mr97310a driver, which supported the Aiptek Pencam VGA+, is
* Copyright (C) 2009 Kyle Guinn <elyk03@gmail.com>
*
* Support for the MR97310A cameras in addition to the Aiptek Pencam VGA+
* and for the routines for detecting and classifying these various cameras,
+ * is Copyright (C) 2009 Theodore Kilgore <kilgota@auburn.edu>
*
+ * Support for the control settings for the CIF cameras is
+ * Copyright (C) 2009 Hans de Goede <hdgoede@redhat.com> and
+ * Thomas Kaiser <thomas@kaiser-linux.li>
+ *
+ * Support for the control settings for the VGA cameras is
* Copyright (C) 2009 Theodore Kilgore <kilgota@auburn.edu>
*
- * Acknowledgements:
+ * Several previously unsupported cameras are owned and have been tested by
+ * Hans de Goede <hdgoede@redhat.com> and
+ * Thomas Kaiser <thomas@kaiser-linux.li> and
+ * Theodore Kilgore <kilgota@auburn.edu>
*
* The MR97311A support in gspca/mars.c has been helpful in understanding some
* of the registers in these cameras.
*
- * Hans de Goede <hdgoede@redhat.com> and
- * Thomas Kaiser <thomas@kaiser-linux.li>
- * have assisted with their experience. Each of them has also helped by
- * testing a previously unsupported camera.
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
#define CAM_TYPE_CIF 0
#define CAM_TYPE_VGA 1
-#define MR97310A_BRIGHTNESS_MIN -254
-#define MR97310A_BRIGHTNESS_MAX 255
#define MR97310A_BRIGHTNESS_DEFAULT 0
-#define MR97310A_EXPOSURE_MIN 300
+#define MR97310A_EXPOSURE_MIN 0
#define MR97310A_EXPOSURE_MAX 4095
#define MR97310A_EXPOSURE_DEFAULT 1000
int len;
};
+static void sd_stopN(struct gspca_dev *gspca_dev);
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
/* V4L2 controls supported by the driver */
static struct ctrl sd_ctrls[] = {
+/* Seprate brightness control description for Argus QuickClix as it has
+ different limits from to other mr97310a camera's */
{
-#define BRIGHTNESS_IDX 0
+#define NORM_BRIGHTNESS_IDX 0
{
.id = V4L2_CID_BRIGHTNESS,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Brightness",
- .minimum = MR97310A_BRIGHTNESS_MIN,
- .maximum = MR97310A_BRIGHTNESS_MAX,
+ .minimum = -254,
+ .maximum = 255,
.step = 1,
.default_value = MR97310A_BRIGHTNESS_DEFAULT,
.flags = 0,
.get = sd_getbrightness,
},
{
-#define EXPOSURE_IDX 1
+#define ARGUS_QC_BRIGHTNESS_IDX 1
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 15,
+ .step = 1,
+ .default_value = MR97310A_BRIGHTNESS_DEFAULT,
+ .flags = 0,
+ },
+ .set = sd_setbrightness,
+ .get = sd_getbrightness,
+ },
+ {
+#define EXPOSURE_IDX 2
{
.id = V4L2_CID_EXPOSURE,
.type = V4L2_CTRL_TYPE_INTEGER,
.get = sd_getexposure,
},
{
-#define GAIN_IDX 2
+#define GAIN_IDX 3
{
.id = V4L2_CID_GAIN,
.type = V4L2_CTRL_TYPE_INTEGER,
int rc;
buf = data;
- rc = sensor_write_reg(gspca_dev, reg, 0x01, &buf, 1);
+ if (sd->cam_type == CAM_TYPE_CIF) {
+ rc = sensor_write_reg(gspca_dev, reg, 0x01, &buf, 1);
+ confirm_reg = sd->sensor_type ? 0x13 : 0x11;
+ } else {
+ rc = sensor_write_reg(gspca_dev, reg, 0x00, &buf, 1);
+ confirm_reg = 0x11;
+ }
if (rc < 0)
return rc;
buf = 0x01;
- confirm_reg = sd->sensor_type ? 0x13 : 0x11;
rc = sensor_write_reg(gspca_dev, confirm_reg, 0x00, &buf, 1);
if (rc < 0)
return rc;
return 0;
}
-static int cam_get_response16(struct gspca_dev *gspca_dev)
+static int cam_get_response16(struct gspca_dev *gspca_dev, u8 reg, int verbose)
{
- __u8 *data = gspca_dev->usb_buf;
int err_code;
- data[0] = 0x21;
+ gspca_dev->usb_buf[0] = reg;
err_code = mr_write(gspca_dev, 1);
if (err_code < 0)
return err_code;
err_code = mr_read(gspca_dev, 16);
- return err_code;
+ if (err_code < 0)
+ return err_code;
+
+ if (verbose)
+ PDEBUG(D_PROBE, "Register: %02x reads %02x%02x%02x", reg,
+ gspca_dev->usb_buf[0],
+ gspca_dev->usb_buf[1],
+ gspca_dev->usb_buf[2]);
+
+ return 0;
}
static int zero_the_pointer(struct gspca_dev *gspca_dev)
u8 status = 0;
int tries = 0;
- err_code = cam_get_response16(gspca_dev);
+ err_code = cam_get_response16(gspca_dev, 0x21, 0);
if (err_code < 0)
return err_code;
if (err_code < 0)
return err_code;
- err_code = cam_get_response16(gspca_dev);
+ err_code = cam_get_response16(gspca_dev, 0x21, 0);
if (err_code < 0)
return err_code;
if (err_code < 0)
return err_code;
- err_code = cam_get_response16(gspca_dev);
+ err_code = cam_get_response16(gspca_dev, 0x21, 0);
if (err_code < 0)
return err_code;
if (err_code < 0)
return err_code;
- err_code = cam_get_response16(gspca_dev);
+ err_code = cam_get_response16(gspca_dev, 0x21, 0);
if (err_code < 0)
return err_code;
return err_code;
while (status != 0x0a && tries < 256) {
- err_code = cam_get_response16(gspca_dev);
+ err_code = cam_get_response16(gspca_dev, 0x21, 0);
status = data[0];
tries++;
if (err_code < 0)
if (err_code < 0)
return err_code;
- err_code = cam_get_response16(gspca_dev);
+ err_code = cam_get_response16(gspca_dev, 0x21, 0);
status = data[0];
tries++;
if (err_code < 0)
return 0;
}
-static u8 get_sensor_id(struct gspca_dev *gspca_dev)
+static int stream_start(struct gspca_dev *gspca_dev)
{
- int err_code;
-
- gspca_dev->usb_buf[0] = 0x1e;
- err_code = mr_write(gspca_dev, 1);
- if (err_code < 0)
- return err_code;
+ gspca_dev->usb_buf[0] = 0x01;
+ gspca_dev->usb_buf[1] = 0x01;
+ return mr_write(gspca_dev, 2);
+}
- err_code = mr_read(gspca_dev, 16);
- if (err_code < 0)
- return err_code;
+static void stream_stop(struct gspca_dev *gspca_dev)
+{
+ gspca_dev->usb_buf[0] = 0x01;
+ gspca_dev->usb_buf[1] = 0x00;
+ if (mr_write(gspca_dev, 2) < 0)
+ PDEBUG(D_ERR, "Stream Stop failed");
+}
- PDEBUG(D_PROBE, "Byte zero reported is %01x", gspca_dev->usb_buf[0]);
+static void lcd_stop(struct gspca_dev *gspca_dev)
+{
+ gspca_dev->usb_buf[0] = 0x19;
+ gspca_dev->usb_buf[1] = 0x54;
+ if (mr_write(gspca_dev, 2) < 0)
+ PDEBUG(D_ERR, "LCD Stop failed");
+}
- return gspca_dev->usb_buf[0];
+static int isoc_enable(struct gspca_dev *gspca_dev)
+{
+ gspca_dev->usb_buf[0] = 0x00;
+ gspca_dev->usb_buf[1] = 0x4d; /* ISOC transfering enable... */
+ return mr_write(gspca_dev, 2);
}
/* this function is called at probe time */
{
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
- __u8 *data = gspca_dev->usb_buf;
int err_code;
cam = &gspca_dev->cam;
cam->cam_mode = vga_mode;
cam->nmodes = ARRAY_SIZE(vga_mode);
+ sd->do_lcd_stop = 0;
+
+ /* Now, logical layout of the driver must fall sacrifice to the
+ * realities of the hardware supported. We have to sort out several
+ * cameras which share the USB ID but are in fact different inside.
+ * We need to start the initialization process for the cameras in
+ * order to classify them. Some of the supported cameras require the
+ * memory pointer to be set to 0 as the very first item of business
+ * or else they will not stream. So we do that immediately.
+ */
+ err_code = zero_the_pointer(gspca_dev);
+ if (err_code < 0)
+ return err_code;
if (id->idProduct == 0x010e) {
sd->cam_type = CAM_TYPE_CIF;
cam->nmodes--;
-
- data[0] = 0x01;
- data[1] = 0x01;
- err_code = mr_write(gspca_dev, 2);
+ err_code = stream_start(gspca_dev);
+ if (err_code < 0)
+ return err_code;
+ err_code = cam_get_response16(gspca_dev, 0x06, 1);
if (err_code < 0)
return err_code;
-
- msleep(200);
- data[0] = get_sensor_id(gspca_dev);
/*
- * Known CIF cameras. If you have another to report, please do
+ * The various CIF cameras share the same USB ID but use
+ * different init routines and different controls. We need to
+ * detect which one is connected!
*
- * Name byte just read sd->sensor_type
- * reported by
- * Sakar Spy-shot 0x28 T. Kilgore 0
- * Innovage 0xf5 (unstable) T. Kilgore 0
- * Vivitar Mini 0x53 H. De Goede 0
- * Vivitar Mini 0x04 / 0x24 E. Rodriguez 0
- * Vivitar Mini 0x08 T. Kilgore 1
- * Elta-Media 8212dc 0x23 T. Kaiser 1
- * Philips dig. keych. 0x37 T. Kilgore 1
+ * A list of known CIF cameras follows. They all report either
+ * 0002 for type 0 or 0003 for type 1.
+ * If you have another to report, please do
+ *
+ * Name sd->sensor_type reported by
+ *
+ * Sakar Spy-shot 0 T. Kilgore
+ * Innovage 0 T. Kilgore
+ * Vivitar Mini 0 H. De Goede
+ * Vivitar Mini 0 E. Rodriguez
+ * Vivitar Mini 1 T. Kilgore
+ * Elta-Media 8212dc 1 T. Kaiser
+ * Philips dig. keych. 1 T. Kilgore
*/
- if ((data[0] & 0x78) == 8 ||
- ((data[0] & 0x2) == 0x2 && data[0] != 0x53))
- sd->sensor_type = 1;
- else
+ switch (gspca_dev->usb_buf[1]) {
+ case 2:
sd->sensor_type = 0;
-
+ break;
+ case 3:
+ sd->sensor_type = 1;
+ break;
+ default:
+ PDEBUG(D_ERR, "Unknown CIF Sensor id : %02x",
+ gspca_dev->usb_buf[1]);
+ return -ENODEV;
+ }
PDEBUG(D_PROBE, "MR97310A CIF camera detected, sensor: %d",
sd->sensor_type);
+ } else {
+ sd->cam_type = CAM_TYPE_VGA;
- if (force_sensor_type != -1) {
- sd->sensor_type = !! force_sensor_type;
- PDEBUG(D_PROBE, "Forcing sensor type to: %d",
- sd->sensor_type);
+ /*
+ * VGA cams also have two different sensor types. Detection
+ * requires a two-step process.
+ *
+ * Here is a report on the result of the first test for the
+ * known MR97310a VGA cameras. If you have another to report,
+ * please do.
+ *
+ * Name byte just read sd->sensor_type
+ * sd->do_lcd_stop
+ * Aiptek Pencam VGA+ 0x31 0 1
+ * ION digital 0x31 0 1
+ * Sakar Digital 77379 0x31 0 1
+ * Argus DC-1620 0x30 1 0
+ * Argus QuickClix 0x30 1 1 (see note)
+ * Note that this test fails to distinguish sd->sensor_type
+ * for the two cameras which have reported 0x30.
+ * Another test will be run on them.
+ * But the sd->do_lcd_stop setting is needed, too.
+ */
+
+ err_code = cam_get_response16(gspca_dev, 0x20, 1);
+ if (err_code < 0)
+ return err_code;
+ sd->sensor_type = gspca_dev->usb_buf[0] & 1;
+ sd->do_lcd_stop = (~gspca_dev->usb_buf[0]) & 1;
+ err_code = stream_start(gspca_dev);
+ if (err_code < 0)
+ return err_code;
+
+ /*
+ * A second test can now resolve any remaining ambiguity in the
+ * identification of the camera's sensor type. Specifically,
+ * it now gives the correct sensor_type for the Argus DC-1620
+ * and the Argus QuickClix.
+ *
+ * This second test is only run if needed,
+ * but additional results from testing some other cameras
+ * are recorded here, too:
+ *
+ * Name gspca_dev->usb_buf[] sd->sensor_type
+ *
+ * Aiptek Pencam VGA+ 0300 (test not needed) 1
+ * ION digital 0350 (test not needed) 1
+ * Argus DC-1620 0450 (remains as type 0) 0
+ * Argus QuickClix 0420 (corrected to type 1) 1
+ *
+ * This test even seems able to distinguish one VGA cam from
+ * another which may be useful. However, the CIF type 1 cameras
+ * do not like it.
+ */
+
+ if (!sd->sensor_type) {
+ err_code = cam_get_response16(gspca_dev, 0x07, 1);
+ if (err_code < 0)
+ return err_code;
+
+ switch (gspca_dev->usb_buf[1]) {
+ case 0x50:
+ break;
+ case 0x20:
+ sd->sensor_type = 1;
+ PDEBUG(D_PROBE, "sensor_type corrected to 1");
+ break;
+ default:
+ PDEBUG(D_ERR, "Unknown VGA Sensor id : %02x",
+ gspca_dev->usb_buf[1]);
+ return -ENODEV;
+ }
}
+ PDEBUG(D_PROBE, "MR97310A VGA camera detected, sensor: %d",
+ sd->sensor_type);
+ }
+ /* Stop streaming as we've started it to probe the sensor type. */
+ sd_stopN(gspca_dev);
+ if (force_sensor_type != -1) {
+ sd->sensor_type = !!force_sensor_type;
+ PDEBUG(D_PROBE, "Forcing sensor type to: %d",
+ sd->sensor_type);
+ }
+
+ /* Setup controls depending on camera type */
+ if (sd->cam_type == CAM_TYPE_CIF) {
+ /* No brightness for sensor_type 0 */
if (sd->sensor_type == 0)
- gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX);
+ gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX) |
+ (1 << ARGUS_QC_BRIGHTNESS_IDX);
+ else
+ gspca_dev->ctrl_dis = (1 << ARGUS_QC_BRIGHTNESS_IDX);
} else {
- sd->cam_type = CAM_TYPE_VGA;
- PDEBUG(D_PROBE, "MR97310A VGA camera detected");
- gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX) |
- (1 << EXPOSURE_IDX) | (1 << GAIN_IDX);
+ /* All controls need to be disabled if VGA sensor_type is 0 */
+ if (sd->sensor_type == 0)
+ gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX) |
+ (1 << ARGUS_QC_BRIGHTNESS_IDX) |
+ (1 << EXPOSURE_IDX) |
+ (1 << GAIN_IDX);
+ else if (sd->do_lcd_stop)
+ /* Argus QuickClix has different brightness limits */
+ gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX);
+ else
+ gspca_dev->ctrl_dis = (1 << ARGUS_QC_BRIGHTNESS_IDX);
}
sd->brightness = MR97310A_BRIGHTNESS_DEFAULT;
};
/* Note: Some of the above descriptions guessed from MR97113A driver */
- data[0] = 0x01;
- data[1] = 0x01;
- err_code = mr_write(gspca_dev, 2);
- if (err_code < 0)
- return err_code;
memcpy(data, startup_string, 11);
if (sd->sensor_type)
err_code = sensor_write_regs(gspca_dev, cif_sensor1_init_data,
ARRAY_SIZE(cif_sensor1_init_data));
}
- if (err_code < 0)
- return err_code;
-
- setbrightness(gspca_dev);
- setexposure(gspca_dev);
- setgain(gspca_dev);
-
- msleep(200);
-
- data[0] = 0x00;
- data[1] = 0x4d; /* ISOC transfering enable... */
- err_code = mr_write(gspca_dev, 2);
- if (err_code < 0)
- return err_code;
-
- return 0;
+ return err_code;
}
static int start_vga_cam(struct gspca_dev *gspca_dev)
int err_code;
const __u8 startup_string[] = {0x00, 0x0d, 0x01, 0x00, 0x00, 0x2b,
0x00, 0x00, 0x00, 0x50, 0xc0};
-
/* What some of these mean is explained in start_cif_cam(), above */
- sd->sof_read = 0;
-
- /*
- * We have to know which camera we have, because the register writes
- * depend upon the camera. This test, run before we actually enter
- * the initialization routine, distinguishes most of the cameras, If
- * needed, another routine is done later, too.
- */
- memset(data, 0, 16);
- data[0] = 0x20;
- err_code = mr_write(gspca_dev, 1);
- if (err_code < 0)
- return err_code;
-
- err_code = mr_read(gspca_dev, 16);
- if (err_code < 0)
- return err_code;
-
- PDEBUG(D_PROBE, "Byte reported is %02x", data[0]);
-
- msleep(200);
- /*
- * Known VGA cameras. If you have another to report, please do
- *
- * Name byte just read sd->sensor_type
- * sd->do_lcd_stop
- * Aiptek Pencam VGA+ 0x31 0 1
- * ION digital 0x31 0 1
- * Argus DC-1620 0x30 1 0
- * Argus QuickClix 0x30 1 1 (not caught here)
- */
- sd->sensor_type = data[0] & 1;
- sd->do_lcd_stop = (~data[0]) & 1;
-
-
-
- /* Streaming setup begins here. */
-
-
- data[0] = 0x01;
- data[1] = 0x01;
- err_code = mr_write(gspca_dev, 2);
- if (err_code < 0)
- return err_code;
-
- /*
- * A second test can now resolve any remaining ambiguity in the
- * identification of the camera type,
- */
- if (!sd->sensor_type) {
- data[0] = get_sensor_id(gspca_dev);
- if (data[0] == 0x7f) {
- sd->sensor_type = 1;
- PDEBUG(D_PROBE, "sensor_type corrected to 1");
- }
- msleep(200);
- }
-
- if (force_sensor_type != -1) {
- sd->sensor_type = !! force_sensor_type;
- PDEBUG(D_PROBE, "Forcing sensor type to: %d",
- sd->sensor_type);
- }
- /*
- * Known VGA cameras.
- * This test is only run if the previous test returned 0x30, but
- * here is the information for all others, too, just for reference.
- *
- * Name byte just read sd->sensor_type
- *
- * Aiptek Pencam VGA+ 0xfb (this test not run) 1
- * ION digital 0xbd (this test not run) 1
- * Argus DC-1620 0xe5 (no change) 0
- * Argus QuickClix 0x7f (reclassified) 1
- */
memcpy(data, startup_string, 11);
if (!sd->sensor_type) {
data[5] = 0x00;
err_code = sensor_write_regs(gspca_dev, vga_sensor1_init_data,
ARRAY_SIZE(vga_sensor1_init_data));
}
- if (err_code < 0)
- return err_code;
-
- msleep(200);
- data[0] = 0x00;
- data[1] = 0x4d; /* ISOC transfering enable... */
- err_code = mr_write(gspca_dev, 2);
-
return err_code;
}
{
struct sd *sd = (struct sd *) gspca_dev;
int err_code;
- struct cam *cam;
- cam = &gspca_dev->cam;
sd->sof_read = 0;
- /*
- * Some of the supported cameras require the memory pointer to be
- * set to 0, or else they will not stream.
- */
- zero_the_pointer(gspca_dev);
- msleep(200);
+
+ /* Some of the VGA cameras require the memory pointer
+ * to be set to 0 again. We have been forced to start the
+ * stream somewhere else to detect the hardware, and closed it,
+ * and now since we are restarting the stream we need to do a
+ * completely fresh and clean start. */
+ err_code = zero_the_pointer(gspca_dev);
+ if (err_code < 0)
+ return err_code;
+
+ err_code = stream_start(gspca_dev);
+ if (err_code < 0)
+ return err_code;
+
if (sd->cam_type == CAM_TYPE_CIF) {
err_code = start_cif_cam(gspca_dev);
} else {
err_code = start_vga_cam(gspca_dev);
}
- return err_code;
+ if (err_code < 0)
+ return err_code;
+
+ setbrightness(gspca_dev);
+ setexposure(gspca_dev);
+ setgain(gspca_dev);
+
+ return isoc_enable(gspca_dev);
}
static void sd_stopN(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int result;
-
- gspca_dev->usb_buf[0] = 1;
- gspca_dev->usb_buf[1] = 0;
- result = mr_write(gspca_dev, 2);
- if (result < 0)
- PDEBUG(D_ERR, "Camera Stop failed");
+ stream_stop(gspca_dev);
/* Not all the cams need this, but even if not, probably a good idea */
zero_the_pointer(gspca_dev);
- if (sd->do_lcd_stop) {
- gspca_dev->usb_buf[0] = 0x19;
- gspca_dev->usb_buf[1] = 0x54;
- result = mr_write(gspca_dev, 2);
- if (result < 0)
- PDEBUG(D_ERR, "Camera Stop failed");
- }
+ if (sd->do_lcd_stop)
+ lcd_stop(gspca_dev);
}
static void setbrightness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
u8 val;
-
- if (gspca_dev->ctrl_dis & (1 << BRIGHTNESS_IDX))
+ u8 sign_reg = 7; /* This reg and the next one used on CIF cams. */
+ u8 value_reg = 8; /* VGA cams seem to use regs 0x0b and 0x0c */
+ const u8 quick_clix_table[] =
+ /* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 */
+ { 0, 4, 8, 12, 1, 2, 3, 5, 6, 9, 7, 10, 13, 11, 14, 15};
+ /*
+ * This control is disabled for CIF type 1 and VGA type 0 cameras.
+ * It does not quite act linearly for the Argus QuickClix camera,
+ * but it does control brightness. The values are 0 - 15 only, and
+ * the table above makes them act consecutively.
+ */
+ if ((gspca_dev->ctrl_dis & (1 << NORM_BRIGHTNESS_IDX)) &&
+ (gspca_dev->ctrl_dis & (1 << ARGUS_QC_BRIGHTNESS_IDX)))
return;
+ if (sd->cam_type == CAM_TYPE_VGA) {
+ sign_reg += 4;
+ value_reg += 4;
+ }
+
/* Note register 7 is also seen as 0x8x or 0xCx in dumps */
if (sd->brightness > 0) {
- sensor_write1(gspca_dev, 7, 0x00);
+ sensor_write1(gspca_dev, sign_reg, 0x00);
val = sd->brightness;
} else {
- sensor_write1(gspca_dev, 7, 0x01);
- val = 257 - sd->brightness;
+ sensor_write1(gspca_dev, sign_reg, 0x01);
+ val = (257 - sd->brightness);
}
- sensor_write1(gspca_dev, 8, val);
+ /* Use lookup table for funky Argus QuickClix brightness */
+ if (sd->do_lcd_stop)
+ val = quick_clix_table[val];
+
+ sensor_write1(gspca_dev, value_reg, val);
}
static void setexposure(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- u8 val;
+ int exposure;
if (gspca_dev->ctrl_dis & (1 << EXPOSURE_IDX))
return;
- if (sd->sensor_type) {
- val = sd->exposure >> 4;
- sensor_write1(gspca_dev, 3, val);
- val = sd->exposure & 0xf;
- sensor_write1(gspca_dev, 4, val);
+ if (sd->cam_type == CAM_TYPE_CIF && sd->sensor_type == 1) {
+ /* This cam does not like very low exposure settings */
+ exposure = (sd->exposure < 300) ? 300 : sd->exposure;
+ sensor_write1(gspca_dev, 3, exposure >> 4);
+ sensor_write1(gspca_dev, 4, exposure & 0x0f);
} else {
- u8 clockdiv;
- int exposure;
-
/* We have both a clock divider and an exposure register.
We first calculate the clock divider, as that determines
the maximum exposure and then we calculayte the exposure
Note our 0 - 4095 exposure is mapped to 0 - 511
milliseconds exposure time */
- clockdiv = (60 * sd->exposure + 7999) / 8000;
+ u8 clockdiv = (60 * sd->exposure + 7999) / 8000;
/* Limit framerate to not exceed usb bandwidth */
if (clockdiv < 3 && gspca_dev->width >= 320)
else if (clockdiv < 2)
clockdiv = 2;
+ if (sd->cam_type == CAM_TYPE_VGA && clockdiv < 4)
+ clockdiv = 4;
+
/* Frame exposure time in ms = 1000 * clockdiv / 60 ->
exposure = (sd->exposure / 8) * 511 / (1000 * clockdiv / 60) */
exposure = (60 * 511 * sd->exposure) / (8000 * clockdiv);
if (gspca_dev->ctrl_dis & (1 << GAIN_IDX))
return;
- if (sd->sensor_type) {
+ if (sd->cam_type == CAM_TYPE_CIF && sd->sensor_type == 1) {
sensor_write1(gspca_dev, 0x0e, sd->gain);
} else {
sensor_write1(gspca_dev, 0x10, sd->gain);
projects / deliverable / linux.git / commitdiff
