ARM: dts: imx6qdl-sabreauto: Add audio support

Add ESAI, ASRC, CS42888 for imx6qdl-sabreauto board

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index bd0707fb13eb1de3f30cca3416a07bbbc4584aee..6b17b8519f36493fb6a906f84111c67bb327d43f 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -28,6 +28,51 @@
                };
        };
 
+       clocks {
+               codec_osc: anaclk2 {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <24576000>;
+               };
+       };
+
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               reg_audio: regulator@0 {
+                       compatible = "regulator-fixed";
+                       reg = <0>;
+                       regulator-name = "cs42888_supply";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+               };
+       };
+
+       sound-cs42888 {
+               compatible = "fsl,imx6-sabreauto-cs42888",
+                       "fsl,imx-audio-cs42888";
+               model = "imx-cs42888";
+               audio-cpu = <&esai>;
+               audio-asrc = <&asrc>;
+               audio-codec = <&codec>;
+               audio-routing =
+                       "Line Out Jack", "AOUT1L",
+                       "Line Out Jack", "AOUT1R",
+                       "Line Out Jack", "AOUT2L",
+                       "Line Out Jack", "AOUT2R",
+                       "Line Out Jack", "AOUT3L",
+                       "Line Out Jack", "AOUT3R",
+                       "Line Out Jack", "AOUT4L",
+                       "Line Out Jack", "AOUT4R",
+                       "AIN1L", "Line In Jack",
+                       "AIN1R", "Line In Jack",
+                       "AIN2L", "Line In Jack",
+                       "AIN2R", "Line In Jack";
+       };
+
        sound-spdif {
                compatible = "fsl,imx-audio-spdif",
                           "fsl,imx-sabreauto-spdif";
@@ -45,6 +90,15 @@
        };
 };
 
+&clks {
+       assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+                         <&clks IMX6QDL_PLL4_BYPASS>,
+                         <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
+       assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+                               <&clks IMX6QDL_PLL4_BYPASS_SRC>;
+       assigned-clock-rates = <0>, <0>, <24576000>;
+};
+
 &ecspi1 {
        fsl,spi-num-chipselects = <1>;
        cs-gpios = <&gpio3 19 0>;
@@ -61,6 +115,16 @@
        };
 };
 
+&esai {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_esai>;
+       assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+                         <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+       assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+       assigned-clock-rates = <0>, <24576000>;
+       status = "okay";
+};
+
 &fec {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_enet>;
@@ -184,6 +248,18 @@
                        };
                };
        };
+
+       codec: cs42888@48 {
+               compatible = "cirrus,cs42888";
+               reg = <0x48>;
+               clocks = <&codec_osc>;
+               clock-names = "mclk";
+               VA-supply = <&reg_audio>;
+               VD-supply = <&reg_audio>;
+               VLS-supply = <&reg_audio>;
+               VLC-supply = <&reg_audio>;
+        };
+
 };
 
 &i2c3 {
@@ -261,6 +337,21 @@
                        >;
                };
 
+               pinctrl_esai: esaigrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+                               MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+                               MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+                               MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+                               MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+                               MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+                               MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+                               MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+                               MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+                               MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+                       >;
+               };
+
                pinctrl_gpio_leds: gpioledsgrp {
                        fsl,pins = <
                                MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15      0x80000000

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index e6d13592080d7c701056c2f6a73326aa11e715b5..ceba982983d5c7d7b545ad8fee9fb49eaa42f326 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -300,8 +300,19 @@
                                };
 
                                esai: esai@02024000 {
+                                       #sound-dai-cells = <0>;
+                                       compatible = "fsl,imx35-esai";
                                        reg = <0x02024000 0x4000>;
                                        interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clks IMX6QDL_CLK_ESAI_IPG>,
+                                                <&clks IMX6QDL_CLK_ESAI_MEM>,
+                                                <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+                                                <&clks IMX6QDL_CLK_ESAI_IPG>,
+                                                <&clks IMX6QDL_CLK_SPBA>;
+                                       clock-names = "core", "mem", "extal", "fsys", "dma";
+                                       dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+                                       dma-names = "rx", "tx";
+                                       status = "disabled";
                                };
 
                                ssi1: ssi@02028000 {
@@ -353,8 +364,28 @@
                                };
 
                                asrc: asrc@02034000 {
+                                       compatible = "fsl,imx53-asrc";
                                        reg = <0x02034000 0x4000>;
                                        interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+                                       clocks = <&clks IMX6QDL_CLK_ASRC_IPG>,
+                                               <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>,
+                                               <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                                               <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                                               <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+                                               <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>,
+                                               <&clks IMX6QDL_CLK_SPBA>;
+                                       clock-names = "mem", "ipg", "asrck_0",
+                                               "asrck_1", "asrck_2", "asrck_3", "asrck_4",
+                                               "asrck_5", "asrck_6", "asrck_7", "asrck_8",
+                                               "asrck_9", "asrck_a", "asrck_b", "asrck_c",
+                                               "asrck_d", "asrck_e", "asrck_f", "dma";
+                                       dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+                                               <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+                                       dma-names = "rxa", "rxb", "rxc",
+                                                       "txa", "txb", "txc";
+                                       fsl,asrc-rate  = <48000>;
+                                       fsl,asrc-width = <16>;
+                                       status = "okay";
                                };
 
                                spba@0203c000 {