Fix a commit
6afe8e98a664 ("internal error for backwards .org"),
<https://www.sourceware.org/ml/binutils/2008-06/msg00212.html>,
GAS regression that caused legitimate code to fail assembly with an
"attempt to move .org backwards" error.
For example with the `mips-linux' target we get:
$ cat org.s
.set mips16
la $2, foo
.org 0x1000
.align 2
foo:
.half 0
$ as -o org.o org.s
org.s: Assembler messages:
org.s:3: Error: attempt to move .org backwards
$
where the location pointer is obviously not moved backwards with `.org'.
The cause is positive `stretch' in relaxation due to a PC-relative ADDIU
instruction (produced from the LA macro used) getting expanded from 2 to
4 bytes as `foo' is noticed to be out of range for the short encoding.
This in turn triggers logic in `relax_segment' which concludes in the
processing of an `rs_org' frag produced that the location pointer is
moved backwards while in fact only the amount to space forward to the
location requested has shrunk, resulting in a negative growth of the
frag.
Correct the bad logic then and instead verify that the fixed part of an
`rs_org' frag has not overrun the location requested, as per the comment
already included with the error message:
/* Growth may be negative, but variable part of frag
cannot have fewer than 0 chars. That is, we can't
.org backwards. */
which accurately describes the regression scenario. Move the comment
ahead the conditional noted, for clarity.
Add generic and MIPS test cases for the `.org' pseudo-op, including the
test case discussed though not integrated with the offending commit in
particular, adjusted to work across all targets.
gas/
* write.c (relax_segment) <rs_org>: Only bail out if the fixed
part of the frag has overrun the location requested.
* testsuite/gas/all/org-1.d: New test.
* testsuite/gas/all/org-2.d: New test.
* testsuite/gas/all/org-3.d: New test.
* testsuite/gas/all/org-4.d: New test.
* testsuite/gas/all/org-5.d: New test.
* testsuite/gas/all/org-6.d: New test.
* testsuite/gas/all/org-1.l: New stderr output.
* testsuite/gas/all/org-2.l: New stderr output.
* testsuite/gas/all/org-3.l: New stderr output.
* testsuite/gas/all/org-1.s: New test source.
* testsuite/gas/all/org-2.s: New test source.
* testsuite/gas/all/org-3.s: New test source.
* testsuite/gas/all/org-4.s: New test source.
* testsuite/gas/all/org-5.s: New test source.
* testsuite/gas/all/org-6.s: New test source.
* testsuite/gas/all/gas.exp: Run the new tests.
* testsuite/gas/mips/org-1.d: New test.
* testsuite/gas/mips/org-2.d: New test.
* testsuite/gas/mips/org-3.d: New test.
* testsuite/gas/mips/org-4.d: New test.
* testsuite/gas/mips/org-5.d: New test.
* testsuite/gas/mips/org-6.d: New test.
* testsuite/gas/mips/org-7.d: New test.
* testsuite/gas/mips/org-8.d: New test.
* testsuite/gas/mips/org-9.d: New test.
* testsuite/gas/mips/org-10.d: New test.
* testsuite/gas/mips/org-11.d: New test.
* testsuite/gas/mips/org-12.d: New test.
* testsuite/gas/mips/org-1.l: New stderr output.
* testsuite/gas/mips/org-4.l: New stderr output.
* testsuite/gas/mips/org-5.l: New stderr output.
* testsuite/gas/mips/org-6.l: New stderr output.
* testsuite/gas/mips/org-10.l: New stderr output.
* testsuite/gas/mips/org-1.s: New test source.
* testsuite/gas/mips/org-2.s: New test source.
* testsuite/gas/mips/org-3.s: New test source.
* testsuite/gas/mips/org-4.s: New test source.
* testsuite/gas/mips/org-5.s: New test source.
* testsuite/gas/mips/org-6.s: New test source.
* testsuite/gas/mips/org-7.s: New test source.
* testsuite/gas/mips/org-8.s: New test source.
* testsuite/gas/mips/org-9.s: New test source.
* testsuite/gas/mips/org-10.s: New test source.
* testsuite/gas/mips/org-11.s: New test source.
* testsuite/gas/mips/org-12.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
+2017-03-02 Maciej W. Rozycki <macro@imgtec.com>
+
+ * write.c (relax_segment) <rs_org>: Only bail out if the fixed
+ part of the frag has overrun the location requested.
+
+ * testsuite/gas/all/org-1.d: New test.
+ * testsuite/gas/all/org-2.d: New test.
+ * testsuite/gas/all/org-3.d: New test.
+ * testsuite/gas/all/org-4.d: New test.
+ * testsuite/gas/all/org-5.d: New test.
+ * testsuite/gas/all/org-6.d: New test.
+ * testsuite/gas/all/org-1.l: New stderr output.
+ * testsuite/gas/all/org-2.l: New stderr output.
+ * testsuite/gas/all/org-3.l: New stderr output.
+ * testsuite/gas/all/org-1.s: New test source.
+ * testsuite/gas/all/org-2.s: New test source.
+ * testsuite/gas/all/org-3.s: New test source.
+ * testsuite/gas/all/org-4.s: New test source.
+ * testsuite/gas/all/org-5.s: New test source.
+ * testsuite/gas/all/org-6.s: New test source.
+ * testsuite/gas/all/gas.exp: Run the new tests.
+
+ * testsuite/gas/mips/org-1.d: New test.
+ * testsuite/gas/mips/org-2.d: New test.
+ * testsuite/gas/mips/org-3.d: New test.
+ * testsuite/gas/mips/org-4.d: New test.
+ * testsuite/gas/mips/org-5.d: New test.
+ * testsuite/gas/mips/org-6.d: New test.
+ * testsuite/gas/mips/org-7.d: New test.
+ * testsuite/gas/mips/org-8.d: New test.
+ * testsuite/gas/mips/org-9.d: New test.
+ * testsuite/gas/mips/org-10.d: New test.
+ * testsuite/gas/mips/org-11.d: New test.
+ * testsuite/gas/mips/org-12.d: New test.
+ * testsuite/gas/mips/org-1.l: New stderr output.
+ * testsuite/gas/mips/org-4.l: New stderr output.
+ * testsuite/gas/mips/org-5.l: New stderr output.
+ * testsuite/gas/mips/org-6.l: New stderr output.
+ * testsuite/gas/mips/org-10.l: New stderr output.
+ * testsuite/gas/mips/org-1.s: New test source.
+ * testsuite/gas/mips/org-2.s: New test source.
+ * testsuite/gas/mips/org-3.s: New test source.
+ * testsuite/gas/mips/org-4.s: New test source.
+ * testsuite/gas/mips/org-5.s: New test source.
+ * testsuite/gas/mips/org-6.s: New test source.
+ * testsuite/gas/mips/org-7.s: New test source.
+ * testsuite/gas/mips/org-8.s: New test source.
+ * testsuite/gas/mips/org-9.s: New test source.
+ * testsuite/gas/mips/org-10.s: New test source.
+ * testsuite/gas/mips/org-11.s: New test source.
+ * testsuite/gas/mips/org-12.s: New test source.
+ * testsuite/gas/mips/mips.exp: Run the new tests.
+
2017-03-01 Szabolcs Nagy <szabolcs.nagy@arm.com>
* doc/c-aarch64.texi (AArch64 Extensions): Document rcpc.
dg-init
dg-runtest [lsort [glob -nocomplain $srcdir/$subdir/err-*.s $srcdir/$subdir/warn-*.s]] "" ""
dg-finish
+
+# Set $nop_type appropriately to indicate the NOP instruction mnemonic.
+case $target_triplet in {
+ { "mmix-*-*" } {
+ set nop_type 5
+ }
+ { "i960-*-*" } {
+ set nop_type 4
+ }
+ { "i370-*-*" } {
+ set nop_type 3
+ }
+ { "or1k*-*-*" } {
+ set nop_type 2
+ }
+ { "ia64-*-*" } {
+ set nop_type 1
+ }
+ default {
+ set nop_type 0
+ }
+}
+run_dump_test "org-1" [list [list as "--defsym nop_type=$nop_type"]]
+run_dump_test "org-2"
+run_dump_test "org-3"
+run_dump_test "org-4"
+run_dump_test "org-5"
+run_dump_test "org-6"
--- /dev/null
+#name: .org test 1
+#as: -gdwarf2
+#error-output: org-1.l
--- /dev/null
+.*: Assembler messages:
+.*:22: Error: attempt to move \.org backwards
--- /dev/null
+ .macro i_nop
+ .if nop_type == 1
+ nop 0
+ .elseif nop_type == 2
+ l.nop
+ .elseif nop_type == 3
+ nopr 1
+ .elseif nop_type == 4
+ mov g0, g0
+ .elseif nop_type == 5
+ set $0, $0
+ .else
+ nop
+ .endif
+ .endm
+
+ .text
+ .org 0x20
+ .globl foo
+foo:
+ i_nop
+ .org 0x10
+ .globl bar
+bar:
+ i_nop
--- /dev/null
+#name: .org test 2
+#error-output: org-2.l
--- /dev/null
+.*: Assembler messages:
+.*:6: Error: attempt to move \.org backwards
--- /dev/null
+ .data
+ .org 0x10
+ .globl foo
+foo:
+ .byte 0, 1, 2, 3
+ .org 0x10
+ .globl bar
+bar:
+ .byte 0, 1, 2, 3
--- /dev/null
+#name: .org test 3
+#error-output: org-3.l
--- /dev/null
+.*: Assembler messages:
+.*:6: Error: attempt to move \.org backwards
--- /dev/null
+ .data
+ .org 0x10
+ .globl foo
+foo:
+ .byte 0, 1, 2, 3
+ .org 0x13
+ .globl bar
+bar:
+ .byte 0, 1, 2, 3
--- /dev/null
+#nm: -g --defined-only
+#name: .org test 4
+
+0+000014 . bar
+0+000010 . foo
--- /dev/null
+ .data
+ .org 0x10
+ .globl foo
+foo:
+ .byte 0, 1, 2, 3
+ .org 0x14
+ .globl bar
+bar:
+ .byte 0, 1, 2, 3
--- /dev/null
+#nm: -g --defined-only
+#name: .org test 5
+
+0+000015 . bar
+0+000010 . foo
--- /dev/null
+ .data
+ .org 0x10
+ .globl foo
+foo:
+ .byte 0, 1, 2, 3
+ .org 0x15
+ .globl bar
+bar:
+ .byte 0, 1, 2, 3
--- /dev/null
+#nm: -g --defined-only
+#name: .org test 6
+
+0+000018 . bar
+0+000010 . foo
--- /dev/null
+ .data
+ .org 0x10
+ .globl foo
+foo:
+ .byte 0, 1, 2, 3
+ .org 0x18
+ .globl bar
+bar:
+ .byte 0, 1, 2, 3
run_dump_test "debug-label-end-2"
run_dump_test "debug-label-end-3"
+ run_dump_test "org-1"
+ run_dump_test "org-2"
+ run_dump_test "org-3"
+ run_dump_test "org-4"
+ run_dump_test "org-5"
+ run_dump_test "org-6"
+ run_dump_test "org-7"
+ run_dump_test "org-8"
+ run_dump_test "org-9"
+ run_dump_test "org-10"
+ run_dump_test "org-11"
+ run_dump_test "org-12"
+
run_dump_test_arches "r6" [mips_arch_list_matching mips32r6]
if $has_newabi {
run_dump_test_arches "r6-n32" [mips_arch_list_matching mips64r6]
--- /dev/null
+#nm: -g --defined-only
+#as: --relax-branch
+#name: MIPS .org test 1
+#stderr: org-1.l
+
+0+100000 . bar
+0+000000 . foo
--- /dev/null
+.*: Assembler messages:
+.*:4: Warning: relaxed out-of-range branch into a jump
--- /dev/null
+ .text
+ .globl foo
+foo:
+ beqz $2, lbar
+ .org 0x100000
+ .globl bar
+bar:
+lbar:
+ nop
--- /dev/null
+#nm: -g --defined-only
+#as: --relax-branch
+#name: MIPS .org test 10
+#stderr: org-10.l
+
+0+100000 . bar
+0+000000 . foo
--- /dev/null
+.*: Assembler messages:
+.*:4: Warning: relaxed out-of-range branch into a jump
--- /dev/null
+ .text
+ .globl foo
+foo:
+ beqz $2, lbar
+ .org 0x10
+ nop
+ .space 0xfffec
+ .globl bar
+bar:
+lbar:
+ nop
--- /dev/null
+#nm: -g --defined-only
+#as: -32
+#name: MIPS .org test 11
+
+0+001000 . bar
+0+000000 . foo
--- /dev/null
+ .set mips16
+ .text
+ .globl foo
+foo:
+ la $2, lbar
+ .org 0x4
+ nop
+ .space 0xffa
+ .align 2
+ .globl bar
+bar = .
+lbar = .
+ nop
--- /dev/null
+#nm: -g --defined-only
+#name: MIPS .org test 12
+
+0+001000 . bar
+0+000000 . foo
--- /dev/null
+ .set micromips
+ .text
+ .globl foo
+foo:
+ addu $4, $3, $2
+ beqz $2, lbar
+ .org 0x6
+ nop
+ .space 0xff8
+ .globl bar
+bar:
+lbar:
+ nop
--- /dev/null
+#nm: -g --defined-only
+#as: -32
+#name: MIPS .org test 2
+
+0+001000 . bar
+0+000000 . foo
--- /dev/null
+ .set mips16
+ .text
+ .globl foo
+foo:
+ la $2, lbar
+ .org 0x1000
+ .align 2
+ .globl bar
+bar = .
+lbar = .
+ nop
--- /dev/null
+#nm: -g --defined-only
+#name: MIPS .org test 3
+
+0+001000 . bar
+0+000000 . foo
--- /dev/null
+ .set micromips
+ .text
+ .globl foo
+foo:
+ addu $4, $3, $2
+ beqz $2, lbar
+ .org 0x1000
+ .globl bar
+bar:
+lbar:
+ nop
--- /dev/null
+#as: --relax-branch
+#name: MIPS .org test 4
+#error-output: org-4.l
--- /dev/null
+.*: Assembler messages:
+.*:5: Error: attempt to move \.org backwards
+.*:4: Warning: relaxed out-of-range branch into a jump
--- /dev/null
+ .text
+ .globl foo
+foo:
+ beqz $2, lbar
+ .org 0xc
+ nop
+ .space 0xffff0
+ .globl bar
+bar:
+lbar:
+ nop
--- /dev/null
+#as: -32
+#name: MIPS .org test 5
+#error-output: org-5.l
--- /dev/null
+.*: Assembler messages:
+.*:6: Error: attempt to move \.org backwards
--- /dev/null
+ .set mips16
+ .text
+ .globl foo
+foo:
+ la $2, lbar
+ .org 0x2
+ nop
+ .space 0xffc
+ .align 2
+ .globl bar
+bar = .
+lbar = .
+ nop
--- /dev/null
+#name: MIPS .org test 6
+#error-output: org-6.l
--- /dev/null
+.*: Assembler messages:
+.*:7: Error: attempt to move \.org backwards
--- /dev/null
+ .set micromips
+ .text
+ .globl foo
+foo:
+ addu $4, $3, $2
+ beqz $2, lbar
+ .org 0x4
+ nop
+ .space 0xffa
+ .globl bar
+bar:
+lbar:
+ nop
--- /dev/null
+#nm: -g --defined-only
+#as: --relax-branch
+#name: MIPS .org test 7
+
+0+010000 . bar
+0+000000 . foo
--- /dev/null
+ .text
+ .globl foo
+foo:
+ beqz $2, lbar
+ .org 0x8
+ nop
+ .space 0xfff4
+ .globl bar
+bar:
+lbar:
+ nop
--- /dev/null
+#nm: -g --defined-only
+#as: -32
+#name: MIPS .org test 8
+
+0+000100 . bar
+0+000000 . foo
--- /dev/null
+ .set mips16
+ .text
+ .globl foo
+foo:
+ la $2, lbar
+ .org 0x2
+ nop
+ .space 0xfc
+ .align 2
+ .globl bar
+bar = .
+lbar = .
+ nop
--- /dev/null
+#nm: -g --defined-only
+#name: MIPS .org test 9
+
+0+000080 . bar
+0+000000 . foo
--- /dev/null
+ .set micromips
+ .text
+ .globl foo
+foo:
+ addu $4, $3, $2
+ beqz $2, lbar
+ .org 0x4
+ nop
+ .space 0x7a
+ .globl bar
+bar:
+lbar:
+ nop
know (fragP->fr_next);
after = fragP->fr_next->fr_address + stretch;
growth = target - after;
- if (growth < 0)
+
+ /* Growth may be negative, but variable part of frag
+ cannot have fewer than 0 chars. That is, we can't
+ .org backwards. */
+ if (address + fragP->fr_fix > target)
{
growth = 0;
break;
}
- /* Growth may be negative, but variable part of frag
- cannot have fewer than 0 chars. That is, we can't
- .org backwards. */
as_bad_where (fragP->fr_file, fragP->fr_line,
_("attempt to move .org backwards"));
projects / deliverable / binutils-gdb.git / commitdiff
