Initial revision
authorJim Kingdon <jkingdon@engr.sgi.com>
Fri, 19 Apr 1991 23:37:08 +0000 (23:37 +0000)
committerJim Kingdon <jkingdon@engr.sgi.com>
Fri, 19 Apr 1991 23:37:08 +0000 (23:37 +0000)
gdb/arm-opcode.h [new file with mode: 0755]

diff --git a/gdb/arm-opcode.h b/gdb/arm-opcode.h
new file mode 100755 (executable)
index 0000000..d968e6e
--- /dev/null
@@ -0,0 +1,294 @@
+/* ARM opcode list.
+   Copyright (C) 1989, Free Software Foundation, Inc.
+
+This file is part of GDB and GAS.
+
+GDB and GAS are free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 1, or (at your option)
+any later version.
+
+GDB and GAS are distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GDB or GAS; see the file COPYING.  If not, write to
+the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+/* types of instruction (encoded in bits 26 and 27 of the instruction) */
+
+#define TYPE_ARITHMETIC                0
+#define TYPE_LDR_STR           1
+#define TYPE_BLOCK_BRANCH      2
+#define TYPE_SWI               3
+
+/* bit 25 decides whether an instruction is a block move or a branch */
+#define SUBTYPE_BLOCK          0
+#define SUBTYPE_BRANCH         1
+
+/* codes to distinguish the arithmetic instructions */
+
+#define OPCODE_AND     0
+#define OPCODE_EOR     1
+#define OPCODE_SUB     2
+#define OPCODE_RSB     3
+#define OPCODE_ADD     4
+#define OPCODE_ADC     5
+#define OPCODE_SBC     6
+#define OPCODE_RSC     7
+#define OPCODE_TST     8
+#define OPCODE_TEQ     9
+#define OPCODE_CMP     10
+#define OPCODE_CMN     11
+#define OPCODE_ORR     12
+#define OPCODE_MOV     13
+#define OPCODE_BIC     14
+#define OPCODE_MVN     15
+
+/* condition codes */
+
+#define COND_EQ                0
+#define COND_NE                1
+#define COND_CS                2
+#define COND_CC                3
+#define COND_MI                4
+#define COND_PL                5
+#define COND_VS                6
+#define COND_VC                7
+#define COND_HI                8
+#define COND_LS                9
+#define COND_GE                10
+#define COND_LT                11
+#define COND_GT                12
+#define COND_LE                13
+#define COND_AL                14
+#define COND_NV                15
+
+/* Describes the format of an ARM machine instruction */
+
+struct generic_fmt {
+    unsigned rest      :25;    /* the rest of the instruction */
+    unsigned subtype   :1;     /* used to decide between block and branch */
+    unsigned type      :2;     /* one of TYPE_* */
+    unsigned cond      :4;     /* one of COND_* defined above */
+};
+
+struct arith_fmt {
+    unsigned operand2  :12;    /* #nn or rn or rn shift #m or rn shift rm */
+    unsigned dest      :4;     /* place where the answer goes */
+    unsigned operand1  :4;     /* first operand to instruction */
+    unsigned set       :1;     /* == 1 means set processor flags */
+    unsigned opcode    :4;     /* one of OPCODE_* defined above */
+    unsigned immed     :1;     /* operand2 is an immediate value */
+    unsigned type      :2;     /* == TYPE_ARITHMETIC */
+    unsigned cond      :4;     /* one of COND_* defined above */
+};
+
+struct ldr_str_fmt {
+    unsigned offset    :12;    /* #nn or rn or rn shift #m */
+    unsigned reg       :4;     /* destination for LDR, source for STR */
+    unsigned base      :4;     /* base register */
+    unsigned is_load   :1;     /* == 1 for LDR */
+    unsigned writeback :1;     /* == 1 means write back (base+offset) into base */
+    unsigned byte      :1;     /* == 1 means byte access else word */
+    unsigned up                :1;     /* == 1 means add offset else subtract it */
+    unsigned pre_index :1;     /* == 1 means [a,b] form else [a],b form */
+    unsigned immed     :1;     /* == 0 means immediate offset */
+    unsigned type      :2;     /* == TYPE_LDR_STR */
+    unsigned cond      :4;     /* one of COND_* defined above */
+};
+
+struct block_fmt {
+    unsigned mask      :16;    /* register mask */
+    unsigned base      :4;     /* register used as base of move */
+    unsigned is_load   :1;     /* == 1 for LDM */
+    unsigned writeback :1;     /* == 1 means update base after move */
+    unsigned set       :1;     /* == 1 means set flags in pc if included in mask */
+    unsigned increment :1;     /* == 1 means increment base register */
+    unsigned before    :1;     /* == 1 means inc/dec before each move */
+    unsigned is_block  :1;     /* == SUBTYPE_BLOCK */
+    unsigned type      :2;     /* == TYPE_BLOCK_BRANCH */
+    unsigned cond      :4;     /* one of COND_* defined above */
+};
+
+struct branch_fmt {
+    unsigned dest      :24;    /* destination of the branch */
+    unsigned link      :1;     /* branch with link (function call) */
+    unsigned is_branch :1;     /* == SUBTYPE_BRANCH */
+    unsigned type      :2;     /* == TYPE_BLOCK_BRANCH */
+    unsigned cond      :4;     /* one of COND_* defined above */
+};
+
+#define ROUND_N                0
+#define ROUND_P                1
+#define ROUND_M                2
+#define ROUND_Z                3
+
+#define FLOAT2_MVF     0
+#define FLOAT2_MNF     1
+#define FLOAT2_ABS     2
+#define FLOAT2_RND     3
+#define FLOAT2_SQT     4
+#define FLOAT2_LOG     5
+#define FLOAT2_LGN     6
+#define FLOAT2_EXP     7
+#define FLOAT2_SIN     8
+#define FLOAT2_COS     9
+#define FLOAT2_TAN     10
+#define FLOAT2_ASN     11
+#define FLOAT2_ACS     12
+#define FLOAT2_ATN     13
+
+#define FLOAT3_ADF     0
+#define FLOAT3_MUF     1
+#define FLOAT3_SUF     2
+#define FLOAT3_RSF     3
+#define FLOAT3_DVF     4
+#define FLOAT3_RDF     5
+#define FLOAT3_POW     6
+#define FLOAT3_RPW     7
+#define FLOAT3_RMF     8
+#define FLOAT3_FML     9
+#define FLOAT3_FDV     10
+#define FLOAT3_FRD     11
+#define FLOAT3_POL     12
+
+struct float2_fmt {
+    unsigned operand2  :3;     /* second operand */
+    unsigned immed     :1;     /* == 1 if second operand is a constant */
+    unsigned pad1      :1;     /* == 0 */
+    unsigned rounding  :2;     /* ROUND_* */
+    unsigned is_double :1;     /* == 1 if precision is double (only if not extended) */
+    unsigned pad2      :4;     /* == 1 */
+    unsigned dest      :3;     /* destination */
+    unsigned is_2_op   :1;     /* == 1 if 2 operand ins */
+    unsigned operand1  :3;     /* first operand (only of is_2_op == 0) */
+    unsigned is_extended :1;   /* == 1 if precision is extended */
+    unsigned opcode    :4;     /* FLOAT2_* or FLOAT3_* depending on is_2_op */
+    unsigned must_be_2 :2;     /* == 2 */
+    unsigned type      :2;     /* == TYPE_SWI */
+    unsigned cond      :4;     /* COND_* */
+};
+
+struct swi_fmt {
+    unsigned argument  :24;    /* argument to SWI (syscall number) */
+    unsigned must_be_3 :2;     /* == 3 */
+    unsigned type      :2;     /* == TYPE_SWI */
+    unsigned cond      :4;     /* one of COND_* defined above */
+};
+
+union insn_fmt {
+    struct generic_fmt generic;
+    struct arith_fmt   arith;
+    struct ldr_str_fmt ldr_str;
+    struct block_fmt   block;
+    struct branch_fmt  branch;
+    struct swi_fmt     swi;
+    unsigned long      ins;
+};
+
+struct opcode {
+    unsigned long value, mask; /* recognise instruction if (op&mask)==value */
+    char *assembler;           /* how to disassemble this instruction */
+};
+
+/* format of the assembler string :
+   
+   %%                  %
+   %<bitfield>d                print the bitfield in decimal
+   %<bitfield>x                print the bitfield in hex
+   %<bitfield>r                print as an ARM register
+   %<bitfield>f                print a floating point constant if >7 else an fp register
+   %c                  print condition code (always bits 28-31)
+   %P                  print floating point precision in arithmetic insn
+   %Q                  print floating point precision in ldf/stf insn
+   %R                  print floating point rounding mode
+   %<bitnum>'c         print specified char iff bit is one
+   %<bitnum>`c         print specified char iff bit is zero
+   %<bitnum>?ab                print a if bit is one else print b
+   %p                  print 'p' iff bits 12-15 are 15
+   %o                  print operand2 (immediate or register + shift)
+   %a                  print address for ldr/str instruction
+   %b                  print branch destination
+   %A                  print address for ldc/stc/ldf/stf instruction
+   %m                  print register mask for ldm/stm instruction
+*/
+
+static struct opcode opcodes[] = {
+    /* ARM instructions */
+    0x00000090, 0x0fe000f0, "mul%20's %12-15r, %16-19r, %0-3r",
+    0x00200090, 0x0fe000f0, "mla%20's %12-15r, %16-19r, %0-3r, %8-11r",
+    0x00000000, 0x0de00000, "and%c%20's %12-15r, %16-19r, %o",
+    0x00200000, 0x0de00000, "eor%c%20's %12-15r, %16-19r, %o",
+    0x00400000, 0x0de00000, "sub%c%20's %12-15r, %16-19r, %o",
+    0x00600000, 0x0de00000, "rsb%c%20's %12-15r, %16-19r, %o",
+    0x00800000, 0x0de00000, "add%c%20's %12-15r, %16-19r, %o",
+    0x00a00000, 0x0de00000, "adc%c%20's %12-15r, %16-19r, %o",
+    0x00c00000, 0x0de00000, "sbc%c%20's %12-15r, %16-19r, %o",
+    0x00e00000, 0x0de00000, "rsc%c%20's %12-15r, %16-19r, %o",
+    0x01000000, 0x0de00000, "tst%c%p %16-19r, %o",
+    0x01200000, 0x0de00000, "teq%c%p %16-19r, %o",
+    0x01400000, 0x0de00000, "cmp%c%p %16-19r, %o",
+    0x01600000, 0x0de00000, "cmn%c%p %16-19r, %o",
+    0x01800000, 0x0de00000, "orr%c%20's %12-15r, %16-19r, %o",
+    0x01a00000, 0x0de00000, "mov%c%20's %12-15r, %o",
+    0x01c00000, 0x0de00000, "bic%c%20's %12-15r, %16-19r, %o",
+    0x01e00000, 0x0de00000, "mvn%c%20's %12-15r, %o",
+    0x04000000, 0x0c100000, "str%c%22'b %12-15r, %a",
+    0x04100000, 0x0c100000, "ldr%c%22'b %12-15r, %a",
+    0x08000000, 0x0e100000, "stm%c%23?id%24?ba %16-19r%22`!, %m",
+    0x08100000, 0x0e100000, "ldm%c%23?id%24?ba %16-19r%22`!, %m%22'^",
+    0x0a000000, 0x0e000000, "b%c%24'l %b",
+    0x0f000000, 0x0f000000, "swi%c %0-23x",
+    /* Floating point coprocessor instructions */
+    0x0e000100, 0x0ff08f10, "adf%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0e100100, 0x0ff08f10, "muf%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0e200100, 0x0ff08f10, "suf%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0e300100, 0x0ff08f10, "rsf%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0e400100, 0x0ff08f10, "dvf%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0e500100, 0x0ff08f10, "rdf%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0e600100, 0x0ff08f10, "pow%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0e700100, 0x0ff08f10, "rpw%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0e800100, 0x0ff08f10, "rmf%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0e900100, 0x0ff08f10, "fml%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0ea00100, 0x0ff08f10, "fdv%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0eb00100, 0x0ff08f10, "frd%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0ec00100, 0x0ff08f10, "pol%c%P%R %12-14f, %16-18f, %0-3f",
+    0x0e008100, 0x0ff08f10, "mvf%c%P%R %12-14f, %0-3f",
+    0x0e108100, 0x0ff08f10, "mnf%c%P%R %12-14f, %0-3f",
+    0x0e208100, 0x0ff08f10, "abs%c%P%R %12-14f, %0-3f",
+    0x0e308100, 0x0ff08f10, "rnd%c%P%R %12-14f, %0-3f",
+    0x0e408100, 0x0ff08f10, "sqt%c%P%R %12-14f, %0-3f",
+    0x0e508100, 0x0ff08f10, "log%c%P%R %12-14f, %0-3f",
+    0x0e608100, 0x0ff08f10, "lgn%c%P%R %12-14f, %0-3f",
+    0x0e708100, 0x0ff08f10, "exp%c%P%R %12-14f, %0-3f",
+    0x0e808100, 0x0ff08f10, "sin%c%P%R %12-14f, %0-3f",
+    0x0e908100, 0x0ff08f10, "cos%c%P%R %12-14f, %0-3f",
+    0x0ea08100, 0x0ff08f10, "tan%c%P%R %12-14f, %0-3f",
+    0x0eb08100, 0x0ff08f10, "asn%c%P%R %12-14f, %0-3f",
+    0x0ec08100, 0x0ff08f10, "acs%c%P%R %12-14f, %0-3f",
+    0x0ed08100, 0x0ff08f10, "atn%c%P%R %12-14f, %0-3f",
+    0x0e000110, 0x0ff00f1f, "flt%c%P%R %16-18f, %12-15r",
+    0x0e100110, 0x0fff0f98, "fix%c%R %12-15r, %0-2f",
+    0x0e200110, 0x0fff0fff, "wfs%c %12-15r",
+    0x0e300110, 0x0fff0fff, "rfs%c %12-15r",
+    0x0e400110, 0x0fff0fff, "wfc%c %12-15r",
+    0x0e500110, 0x0fff0fff, "rfc%c %12-15r",
+    0x0e90f110, 0x0ff8fff0, "cmf%c %16-18f, %0-3f",
+    0x0eb0f110, 0x0ff8fff0, "cnf%c %16-18f, %0-3f",
+    0x0ed0f110, 0x0ff8fff0, "cmfe%c %16-18f, %0-3f",
+    0x0ef0f110, 0x0ff8fff0, "cnfe%c %16-18f, %0-3f",
+    0x0c000100, 0x0e100f00, "stf%c%Q %12-14f, %A",
+    0x0c100100, 0x0e100f00, "ldf%c%Q %12-14f, %A",
+    /* Generic coprocessor instructions */
+    0x0e000000, 0x0f000010, "cdp%c %8-11d, %20-23d, cr%12-15d, cr%16-19d, cr%0-3d, {%5-7d}",
+    0x0e000010, 0x0f100010, "mrc%c %8-11d, %21-23d, %12-15r, cr%16-19d, cr%0-3d, {%5-7d}",
+    0x0e100010, 0x0f100010, "mcr%c %8-11d, %21-23d, %12-15r, cr%16-19d, cr%0-3d, {%5-7d}",
+    0x0c000000, 0x0e100000, "stc%c%22`l %8-11d, cr%12-15d, %A",
+    0x0c100000, 0x0e100000, "ldc%c%22`l %8-11d, cr%12-15d, %A",
+    /* the rest */
+    0x00000000, 0x00000000, "undefined instruction %0-31x",
+};
+#define N_OPCODES      (sizeof opcodes / sizeof opcodes[0])
This page took 0.054634 seconds and 4 git commands to generate.