--- /dev/null
+/*
+ * Baytrail IOSF-SB MailBox Interface Driver
+ * Copyright (c) 2013, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ *
+ * The IOSF-SB is a fabric bus available on Atom based SOC's that uses a
+ * mailbox interface (MBI) to communicate with mutiple devices. This
+ * driver implements BayTrail-specific access to this interface.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+
+#include "intel_baytrail.h"
+
+static DEFINE_SPINLOCK(iosf_mbi_lock);
+
+static inline u32 iosf_mbi_form_mcr(u8 op, u8 port, u8 offset)
+{
+ return (op << 24) | (port << 16) | (offset << 8) | BT_MBI_ENABLE;
+}
+
+static struct pci_dev *mbi_pdev; /* one mbi device */
+
+/* Hold lock before calling */
+static int iosf_mbi_pci_read_mdr(u32 mcrx, u32 mcr, u32 *mdr)
+{
+ int result;
+
+ if (!mbi_pdev)
+ return -ENODEV;
+
+ if (mcrx) {
+ result = pci_write_config_dword(mbi_pdev,
+ BT_MBI_MCRX_OFFSET, mcrx);
+ if (result < 0)
+ goto iosf_mbi_read_err;
+ }
+
+ result = pci_write_config_dword(mbi_pdev,
+ BT_MBI_MCR_OFFSET, mcr);
+ if (result < 0)
+ goto iosf_mbi_read_err;
+
+ result = pci_read_config_dword(mbi_pdev,
+ BT_MBI_MDR_OFFSET, mdr);
+ if (result < 0)
+ goto iosf_mbi_read_err;
+
+ return 0;
+
+iosf_mbi_read_err:
+ dev_err(&mbi_pdev->dev, "error: PCI config operation returned %d\n",
+ result);
+ return result;
+}
+
+/* Hold lock before calling */
+static int iosf_mbi_pci_write_mdr(u32 mcrx, u32 mcr, u32 mdr)
+{
+ int result;
+
+ if (!mbi_pdev)
+ return -ENODEV;
+
+ result = pci_write_config_dword(mbi_pdev,
+ BT_MBI_MDR_OFFSET, mdr);
+ if (result < 0)
+ goto iosf_mbi_write_err;
+
+ if (mcrx) {
+ result = pci_write_config_dword(mbi_pdev,
+ BT_MBI_MCRX_OFFSET, mcrx);
+ if (result < 0)
+ goto iosf_mbi_write_err;
+ }
+
+ result = pci_write_config_dword(mbi_pdev,
+ BT_MBI_MCR_OFFSET, mcr);
+ if (result < 0)
+ goto iosf_mbi_write_err;
+
+ return 0;
+
+iosf_mbi_write_err:
+ dev_err(&mbi_pdev->dev, "error: PCI config operation returned %d\n",
+ result);
+ return result;
+}
+
+int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
+{
+ u32 mcr, mcrx;
+ unsigned long flags;
+ int ret;
+
+ /*Access to the GFX unit is handled by GPU code */
+ BUG_ON(port == BT_MBI_UNIT_GFX);
+
+ mcr = iosf_mbi_form_mcr(opcode, port, offset & BT_MBI_MASK_LO);
+ mcrx = offset & BT_MBI_MASK_HI;
+
+ spin_lock_irqsave(&iosf_mbi_lock, flags);
+ ret = iosf_mbi_pci_read_mdr(mcrx, mcr, mdr);
+ spin_unlock_irqrestore(&iosf_mbi_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(bt_mbi_read);
+
+int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
+{
+ u32 mcr, mcrx;
+ unsigned long flags;
+ int ret;
+
+ /*Access to the GFX unit is handled by GPU code */
+ BUG_ON(port == BT_MBI_UNIT_GFX);
+
+ mcr = iosf_mbi_form_mcr(opcode, port, offset & BT_MBI_MASK_LO);
+ mcrx = offset & BT_MBI_MASK_HI;
+
+ spin_lock_irqsave(&iosf_mbi_lock, flags);
+ ret = iosf_mbi_pci_write_mdr(mcrx, mcr, mdr);
+ spin_unlock_irqrestore(&iosf_mbi_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(bt_mbi_write);
+
+int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
+{
+ u32 mcr, mcrx;
+ u32 value;
+ unsigned long flags;
+ int ret;
+
+ /*Access to the GFX unit is handled by GPU code */
+ BUG_ON(port == BT_MBI_UNIT_GFX);
+
+ mcr = iosf_mbi_form_mcr(opcode, port, offset & BT_MBI_MASK_LO);
+ mcrx = offset & BT_MBI_MASK_HI;
+
+ spin_lock_irqsave(&iosf_mbi_lock, flags);
+
+ /* Read current mdr value */
+ ret = iosf_mbi_pci_read_mdr(mcrx, mcr & BT_MBI_RD_MASK, &value);
+ if (ret < 0) {
+ spin_unlock_irqrestore(&iosf_mbi_lock, flags);
+ return ret;
+ }
+
+ /* Apply mask */
+ value &= ~mask;
+ mdr &= mask;
+ value |= mdr;
+
+ /* Write back */
+ ret = iosf_mbi_pci_write_mdr(mcrx, mcr | BT_MBI_WR_MASK, value);
+
+ spin_unlock_irqrestore(&iosf_mbi_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(bt_mbi_modify);
+
+static int iosf_mbi_probe(struct pci_dev *pdev,
+ const struct pci_device_id *unused)
+{
+ int ret;
+
+ ret = pci_enable_device(pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "error: could not enable device\n");
+ return ret;
+ }
+
+ mbi_pdev = pci_dev_get(pdev);
+ return 0;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(iosf_mbi_pci_ids) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0F00) },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, iosf_mbi_pci_ids);
+
+static struct pci_driver iosf_mbi_pci_driver = {
+ .name = "iosf_mbi_pci",
+ .probe = iosf_mbi_probe,
+ .id_table = iosf_mbi_pci_ids,
+};
+
+static int __init bt_mbi_init(void)
+{
+ return pci_register_driver(&iosf_mbi_pci_driver);
+}
+
+static void __exit bt_mbi_exit(void)
+{
+ pci_unregister_driver(&iosf_mbi_pci_driver);
+ if (mbi_pdev) {
+ pci_dev_put(mbi_pdev);
+ mbi_pdev = NULL;
+ }
+}
+
+module_init(bt_mbi_init);
+module_exit(bt_mbi_exit);
+
+MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>");
+MODULE_DESCRIPTION("BayTrail Mailbox Interface accessor");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * intel_baytrail.h: MailBox access support for Intel BayTrail platforms
+ */
+
+#ifndef INTEL_BAYTRAIL_MBI_SYMS_H
+#define INTEL_BAYTRAIL_MBI_SYMS_H
+
+#define BT_MBI_MCR_OFFSET 0xD0
+#define BT_MBI_MDR_OFFSET 0xD4
+#define BT_MBI_MCRX_OFFSET 0xD8
+
+#define BT_MBI_RD_MASK 0xFEFFFFFF
+#define BT_MBI_WR_MASK 0X01000000
+
+#define BT_MBI_MASK_HI 0xFFFFFF00
+#define BT_MBI_MASK_LO 0x000000FF
+#define BT_MBI_ENABLE 0xF0
+
+/* BT-SB unit access methods */
+#define BT_MBI_UNIT_AUNIT 0x00
+#define BT_MBI_UNIT_SMC 0x01
+#define BT_MBI_UNIT_CPU 0x02
+#define BT_MBI_UNIT_BUNIT 0x03
+#define BT_MBI_UNIT_PMC 0x04
+#define BT_MBI_UNIT_GFX 0x06
+#define BT_MBI_UNIT_SMI 0x0C
+#define BT_MBI_UNIT_USB 0x43
+#define BT_MBI_UNIT_SATA 0xA3
+#define BT_MBI_UNIT_PCIE 0xA6
+
+/* Read/write opcodes */
+#define BT_MBI_AUNIT_READ 0x10
+#define BT_MBI_AUNIT_WRITE 0x11
+#define BT_MBI_SMC_READ 0x10
+#define BT_MBI_SMC_WRITE 0x11
+#define BT_MBI_CPU_READ 0x10
+#define BT_MBI_CPU_WRITE 0x11
+#define BT_MBI_BUNIT_READ 0x10
+#define BT_MBI_BUNIT_WRITE 0x11
+#define BT_MBI_PMC_READ 0x06
+#define BT_MBI_PMC_WRITE 0x07
+#define BT_MBI_GFX_READ 0x00
+#define BT_MBI_GFX_WRITE 0x01
+#define BT_MBI_SMIO_READ 0x06
+#define BT_MBI_SMIO_WRITE 0x07
+#define BT_MBI_USB_READ 0x06
+#define BT_MBI_USB_WRITE 0x07
+#define BT_MBI_SATA_READ 0x00
+#define BT_MBI_SATA_WRITE 0x01
+#define BT_MBI_PCIE_READ 0x00
+#define BT_MBI_PCIE_WRITE 0x01
+
+/**
+ * bt_mbi_read() - MailBox Interface read command
+ * @port: port indicating subunit being accessed
+ * @opcode: port specific read or write opcode
+ * @offset: register address offset
+ * @mdr: register data to be read
+ *
+ * Locking is handled by spinlock - cannot sleep.
+ * Return: Nonzero on error
+ */
+int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr);
+
+/**
+ * bt_mbi_write() - MailBox unmasked write command
+ * @port: port indicating subunit being accessed
+ * @opcode: port specific read or write opcode
+ * @offset: register address offset
+ * @mdr: register data to be written
+ *
+ * Locking is handled by spinlock - cannot sleep.
+ * Return: Nonzero on error
+ */
+int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr);
+
+/**
+ * bt_mbi_modify() - MailBox masked write command
+ * @port: port indicating subunit being accessed
+ * @opcode: port specific read or write opcode
+ * @offset: register address offset
+ * @mdr: register data being modified
+ * @mask: mask indicating bits in mdr to be modified
+ *
+ * Locking is handled by spinlock - cannot sleep.
+ * Return: Nonzero on error
+ */
+int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask);
+
+#endif /* INTEL_BAYTRAIL_MBI_SYMS_H */
projects / deliverable / linux.git / commitdiff
