projects / deliverable / binutils-gdb.git / commitdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | patch | inline | side by side (parent: bd00c69)
All annotate_breakpoints_changed calls are along-side
authorPedro Alves <palves@redhat.com>
Tue, 22 Jan 2013 20:19:40 +0000 (20:19 +0000)
committerPedro Alves <palves@redhat.com>
Tue, 22 Jan 2013 20:19:40 +0000 (20:19 +0000)
observer_notify_breakpoints_changed calls.  All, except the
init_raw_breakpoint one.  But that one is actually wrong.  The
breakpoint is being constructed at that point, and hasn't been placed
on the breakpoint chain yet.  It would be better placed in
install_breakpoint, and I actually started out that way.  But once the
annotate_breakpoints_changed are parallel to the observer calls, we
can fully move annotations to observers too.

One issue is that this changes the order of annotations a bit.
Before, we'd emit the annotation, and after call "mention()" on the
breakpoint (which prints the breakpoint number, etc.).  But, we call
the observers _after_ mention is called, so the annotation output will
change a little:

void
install_breakpoint (int internal, struct breakpoint *b, int update_gll)
{
  add_to_breakpoint_chain (b);
  set_breakpoint_number (internal, b);
  if (is_tracepoint (b))
    set_tracepoint_count (breakpoint_count);
  if (!internal)
    mention (b);
  observer_notify_breakpoint_created (b);

  if (update_gll)
    update_global_location_list (1);
}

I believe this order doesn't really matter (the frontend needs to wait
for the prompt anyway), so I just adjust the expected output in the
tests.  Emacs in annotations mode doesn't seem to complain.  Couple
that with the previous patch that suppressed duplicated annotations,
and, the fact that some annotations calls were actually missing (were
we do have observer calls), more changes to the tests are needed
anyway.

Tested on x86_64 Fedora 17.

gdb/
2013-01-22  Pedro Alves  <palves@redhat.com>

* annotate.c (annotate_breakpoints_changed): Rename to ...
(annotate_breakpoints_invalid): ... this.  Make static.
(breakpoint_changed): Adjust.
(_initialize_annotate): Always install the observers.  Install a
"breakpoint_created" observer.
* annotate.h (annotate_breakpoints_changed): Delete declaration.
* breakpoint.c (set_breakpoint_condition)
(breakpoint_set_commands, do_map_commands_command)
(init_raw_breakpoint, clear_command, set_ignore_count)
(enable_breakpoint_disp): No longer call
annotate_breakpoints_changed.

gdb/testsuite/
2013-01-22  Pedro Alves  <palves@redhat.com>

* gdb.base/annota1.exp (breakpoints_invalid): New variable.
Adjust tests to breakpoints-invalid changes.
* gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New
variables.
Adjust tests to breakpoints-invalid changes.

gdb/ChangeLog patch | blob | blame | history
gdb/annotate.c patch | blob | blame | history
gdb/annotate.h patch | blob | blame | history
gdb/breakpoint.c patch | blob | blame | history
gdb/testsuite/ChangeLog patch | blob | blame | history
gdb/testsuite/gdb.base/annota1.exp patch | blob | blame | history
gdb/testsuite/gdb.cp/annota2.exp patch | blob | blame | history

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 48f5ad04001bd9a3f76d3b2f8ffbc598dd469b81..adc2217d564b28d9e25343b70af07ed936be8b34 100644 (file)
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,17 @@
+2013-01-22  Pedro Alves  <palves@redhat.com>
+
+       * annotate.c (annotate_breakpoints_changed): Rename to ...
+       (annotate_breakpoints_invalid): ... this.  Make static.
+       (breakpoint_changed): Adjust.
+       (_initialize_annotate): Always install the observers.  Install a
+       "breakpoint_created" observer.
+       * annotate.h (annotate_breakpoints_changed): Delete declaration.
+       * breakpoint.c (set_breakpoint_condition)
+       (breakpoint_set_commands, do_map_commands_command)
+       (init_raw_breakpoint, clear_command, set_ignore_count)
+       (enable_breakpoint_disp): No longer call
+       annotate_breakpoints_changed.
+
 2013-01-22  Pedro Alves  <palves@redhat.com>
 
        * annotate.c: Include "inferior.h".
diff --git a/gdb/annotate.c b/gdb/annotate.c
index 387467b1ad9a5c63ff906ce9f4d74af74cc79173..d82daa2919c21063e505311c990f1b884373c6aa 100644 (file)
--- a/gdb/annotate.c
+++ b/gdb/annotate.c
@@ -63,9 +63,9 @@ print_value_flags (struct type *t)
   else
     printf_filtered (("-"));
 }
-\f
-void
-annotate_breakpoints_changed (void)
+
+static void
+annotate_breakpoints_invalid (void)
 {
   if (annotation_level == 2
       && (!breakpoints_invalid_emitted
@@ -575,15 +575,13 @@ annotate_display_prompt (void)
 static void
 breakpoint_changed (struct breakpoint *b)
 {
-  annotate_breakpoints_changed ();
+  annotate_breakpoints_invalid ();
 }
 
 void
 _initialize_annotate (void)
 {
-  if (annotation_level == 2)
-    {
-      observer_attach_breakpoint_deleted (breakpoint_changed);
-      observer_attach_breakpoint_modified (breakpoint_changed);
-    }
+  observer_attach_breakpoint_created (breakpoint_changed);
+  observer_attach_breakpoint_deleted (breakpoint_changed);
+  observer_attach_breakpoint_modified (breakpoint_changed);
 }
diff --git a/gdb/annotate.h b/gdb/annotate.h
index 73a3098b22cde687ae63a4d1cd9c8fd260a0409d..72c4f19ddad025e72d4cb5756cf0802159bad13e 100644 (file)
--- a/gdb/annotate.h
+++ b/gdb/annotate.h
@@ -19,8 +19,6 @@
 #include "symtab.h"
 #include "gdbtypes.h"
 
-extern void annotate_breakpoints_changed (void);
-
 extern void annotate_breakpoint (int);
 extern void annotate_catchpoint (int);
 extern void annotate_watchpoint (int);
diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c
index 35848b4a8b336a7f396d786e156a6898661c9d2b..216ac73c0025252ba541dcbb9db06ea4badc558b 100644 (file)
--- a/gdb/breakpoint.c
+++ b/gdb/breakpoint.c
@@ -985,7 +985,6 @@ set_breakpoint_condition (struct breakpoint *b, char *exp,
     }
   mark_breakpoint_modified (b);
 
-  annotate_breakpoints_changed ();
   observer_notify_breakpoint_modified (b);
 }
 
@@ -1217,7 +1216,6 @@ breakpoint_set_commands (struct breakpoint *b,
 
   decref_counted_command_line (&b->commands);
   b->commands = alloc_counted_command_line (commands);
-  annotate_breakpoints_changed ();
   observer_notify_breakpoint_modified (b);
 }
 
@@ -1334,7 +1332,6 @@ do_map_commands_command (struct breakpoint *b, void *data)
       incref_counted_command_line (info->cmd);
       decref_counted_command_line (&b->commands);
       b->commands = info->cmd;
-      annotate_breakpoints_changed ();
       observer_notify_breakpoint_modified (b);
     }
 }
@@ -7072,8 +7069,6 @@ init_raw_breakpoint (struct breakpoint *b, struct gdbarch *gdbarch,
      program space.  */
   if (bptype != bp_breakpoint && bptype != bp_hardware_breakpoint)
     b->pspace = sal.pspace;
-
-  annotate_breakpoints_changed ();
 }
 
 /* set_raw_breakpoint is a low level routine for allocating and
@@ -12053,7 +12048,6 @@ clear_command (char *arg, int from_tty)
       else
        printf_unfiltered (_("Deleted breakpoints "));
     }
-  annotate_breakpoints_changed ();
 
   for (ix = 0; VEC_iterate(breakpoint_p, found, ix, b); ix++)
     {
@@ -14441,7 +14435,6 @@ set_ignore_count (int bptnum, int count, int from_tty)
                               "crossings of breakpoint %d."),
                             count, bptnum);
        }
-      annotate_breakpoints_changed ();
       observer_notify_breakpoint_modified (b);
       return;
     }
@@ -14706,8 +14699,7 @@ enable_breakpoint_disp (struct breakpoint *bpt, enum bpdisp disposition,
   bpt->disposition = disposition;
   bpt->enable_count = count;
   update_global_location_list (1);
-  annotate_breakpoints_changed ();
-  
+
   observer_notify_breakpoint_modified (bpt);
 }
 
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 5d3ed122a525fc27c4475c3522c4fe38ca43ccbc..dd925097bf91b7e272b1fc02a9485d86456679fb 100644 (file)
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,11 @@
+2013-01-22  Pedro Alves  <palves@redhat.com>
+
+       * gdb.base/annota1.exp (breakpoints_invalid): New variable.
+       Adjust tests to breakpoints-invalid changes.
+       * gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New
+       variables.
+       Adjust tests to breakpoints-invalid changes.
+
 2013-01-22  Pedro Alves  <palves@redhat.com>
 
        * gdb.base/annota1.exp (annotate ignore count change): Add
diff --git a/gdb/testsuite/gdb.base/annota1.exp b/gdb/testsuite/gdb.base/annota1.exp
index 776738a65909a6106440d4eebbd90ae69c789a85..45638ba3f75f137cdd1ff90dd2fd91aca840576a 100644 (file)
--- a/gdb/testsuite/gdb.base/annota1.exp
+++ b/gdb/testsuite/gdb.base/annota1.exp
@@ -25,6 +25,7 @@ if [is_remote target] then {
     return 0
 }
 
+set breakpoints_invalid "\r\n\032\032breakpoints-invalid\r\n"
 
 #
 # test running programs
@@ -190,7 +191,7 @@ gdb_test_multiple "print non_existent_value" "print non_existent_value" {
 # we can test annotate-signal-handler-caller
 #
 gdb_test_multiple "break handle_USR1" "break handle_USR1" {
-    -re  "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" {
+    -re  "\r\n\032\032post-prompt\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n\032\032breakpoints-invalid\r\n.*$gdb_prompt$" {
        pass "break handle_USR1"
     }
 }
@@ -199,7 +200,7 @@ gdb_test_multiple "break handle_USR1" "break handle_USR1" {
 # break at printf. When we are stopped at printf, we can test 
 #
 gdb_test_multiple "break printf" "break printf" {
-    -re  "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" {
+    -re  "\r\n\032\032post-prompt\r\nBreakpoint.*at $hex.*\032\032breakpoints-invalid\r\n.*$gdb_prompt$" {
        pass "break printf" 
     }
     -re  "\r\n\032\032post-prompt\r\nwarning: Breakpoint address adjusted from $hex to $hex.\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" {
@@ -210,7 +211,7 @@ gdb_test_multiple "break printf" "break printf" {
 #
 # get to printf
 #
-set pat_begin "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n"
+set pat_begin "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n${breakpoints_invalid}"
 set pat_adjust "warning: Breakpoint 3 address previously adjusted from $hex to $hex.\r\n"
 set pat_end "\r\n\032\032breakpoint 3\r\n\r\nBreakpoint 3, \r\n\032\032frame-begin 0 $hex\r\n\r\n(\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n)*.*\032\032frame-function-name\r\n.*printf(@.*)?\r\n\032\032frame-args\r\n.*\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$"
 
@@ -279,19 +280,19 @@ if [target_info exists gdb,nosignals] {
 # delete all the breakpoints
 #
 gdb_test_multiple "delete 1" "delete bp 1" {
-    -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" {
+    -re "\r\n\032\032post-prompt\r\n${breakpoints_invalid}$gdb_prompt$" {
        pass "delete bp 1"
     }
 }
 
 gdb_test_multiple "delete 2" "delete bp 2" {
-    -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" {
+    -re "\r\n\032\032post-prompt\r\n${breakpoints_invalid}$gdb_prompt$" {
        pass "delete bp 2"
     }
 }
 
 gdb_test_multiple "delete 3" "delete bp 3" {
-    -re "\r\n\032\032post-prompt\r\n$gdb_prompt$" {
+    -re "\r\n\032\032post-prompt\r\n${breakpoints_invalid}$gdb_prompt$" {
        pass "delete bp 3"
     }
 }
@@ -301,10 +302,10 @@ gdb_test_multiple "delete 3" "delete bp 3" {
 # to test the annotate output for the display command.
 #
 gdb_test_multiple "break main" "break at main" {
-    -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*$gdb_prompt$" {
+    -re "post-prompt.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*\032\032breakpoints-invalid.*$gdb_prompt$" {
        pass "break at main"
     }
-    -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*$gdb_prompt$" {
+    -re "post-prompt.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*\032\032breakpoints-invalid.*$gdb_prompt$" {
        setup_xfail "*-*-*" 1270
        fail "break at main"
     }
@@ -424,7 +425,7 @@ if [target_info exists gdb,nosignals] {
 } else {
     setup_xfail hppa*-*-hpux11*
     gdb_test_multiple "signal SIGTRAP" "signal sent" {
-       -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
+       -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n${breakpoints_invalid}\r\n\032\032stopped\r\n$gdb_prompt$" {
            pass "signal sent"
        }
     }
diff --git a/gdb/testsuite/gdb.cp/annota2.exp b/gdb/testsuite/gdb.cp/annota2.exp
index 0e2e005e5fb5e3f95210237e57abc1718d6c0bff..a4f7b17c26edbece2b528f5782f74a713a2eaeca 100644 (file)
--- a/gdb/testsuite/gdb.cp/annota2.exp
+++ b/gdb/testsuite/gdb.cp/annota2.exp
@@ -38,6 +38,9 @@ if [is_remote target] then {
     return 0
 }
 
+set breakpoints_invalid "\r\n\032\032breakpoints-invalid\r\n"
+set frames_invalid "\r\n\032\032frames-invalid\r\n"
+
 #
 # line number where we need to stop in main
 #
@@ -99,7 +102,7 @@ gdb_test_multiple "print a" "print class" {
 # `a.x is 1' is asynchronous regarding to `frames-invalid'.
 #
 gdb_test_multiple "continue" "continue until exit" {
-    -re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)*\r\na.x is 1\r\n\(\r\n\032\032frames-invalid\r\n\)*\r\n\032\032exited 0\r\n$inferior_exited_re normally.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
+    -re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)*\r\na.x is 1\r\n\(\r\n\032\032frames-invalid\r\n\)*\r\n\032\032exited 0\r\n$inferior_exited_re normally.\r\n${breakpoints_invalid}\r\n\032\032stopped\r\n$gdb_prompt$" {
        pass "continue until exit"
     }
 }
@@ -112,7 +115,7 @@ gdb_expect {
   -re ".*Delete all breakpoints. \\(y or n\\) \r\n\032\032query.*$" {
            send_gdb "y\n"
            gdb_expect {
-            -re "\r\n\032\032post-query\r\n$gdb_prompt$" { pass "delete bps" }
+            -re "\r\n\032\032post-query\r\n${breakpoints_invalid}$gdb_prompt$" { pass "delete bps" }
             -re ".*$gdb_prompt$" { fail "delete bps" }
             timeout  { fail "delete bps (timeout)" }
         }
@@ -125,7 +128,7 @@ gdb_expect {
 # break at first line of main. 
 #
 gdb_test_multiple "break 22" "break at main" {
-    -re  "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" {
+    -re  "\r\n\032\032post-prompt\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n\032\032breakpoints-invalid.*\r\n$gdb_prompt$" {
        pass "breakpoint at main"
     }
 }
@@ -149,7 +152,7 @@ gdb_test_multiple "run" "run until main breakpoint" {
 # set up a watch point on a.x 
 #
 gdb_test_multiple "watch a.x" "set watch on a.x" {
-    -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\n.*atchpoint 3: a.x\r\n$gdb_prompt$" {
+    -re "\r\n\032\032post-prompt\r\n.*atchpoint 3: a.x.*\r\n\032\032breakpoints-invalid\r\n.*$gdb_prompt$" {
        pass "set watch on a.x"
     }
 }
@@ -159,10 +162,10 @@ gdb_test_multiple "watch a.x" "set watch on a.x" {
 # annotate-watchpoint
 #
 gdb_test_multiple "next" "watch triggered on a.x" {
-    -re "\r\n\032\032post-prompt\r\n\r\n(\032\032breakpoints-invalid\r\n\r\n)*\032\032starting\r\n\r\n(\032\032frames-invalid\r\n\r\n)*\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*$srcfile\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$decimal\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" {
+    -re "\r\n\032\032post-prompt\r\n\032\032starting\r\n${frames_invalid}${breakpoints_invalid}\r\n\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*$srcfile\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$decimal\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n${breakpoints_invalid}.*$gdb_prompt$" {
        pass "watch triggered on a.x"
     }
-    -re "\r\n\032\032post-prompt\r\n\r\n(\032\032breakpoints-invalid\r\n\r\n)*\032\032starting\r\n\r\n(\032\032frames-invalid\r\n\r\n)*\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
+    -re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n${frames_invalid}\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n${breakpoints_invalid}$gdb_prompt$" {
        kfail "gdb/38" "watch triggered on a.x"
     }
 }
GDB Binutils - Deliverables
This page took 0.042562 seconds and 4 git commands to generate.