source "arch/arm/mach-realview/Kconfig"
-source "arch/arm/mach-at91rm9200/Kconfig"
+source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-netx/Kconfig"
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
- machine-$(CONFIG_ARCH_AT91) := at91rm9200
+ machine-$(CONFIG_ARCH_AT91) := at91
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_NETX) := netx
--- /dev/null
+if ARCH_AT91
+
+menu "Atmel AT91 System-on-Chip"
+
+choice
+ prompt "Atmel AT91 Processor"
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
+
+config ARCH_AT91SAM9260
+ bool "AT91SAM9260"
+
+config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
+
+endchoice
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
+
+comment "AT91RM9200 Board Type"
+
+config MACH_ONEARM
+ bool "Ajeco 1ARM Single Board Computer"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using Ajeco's 1ARM Single Board Computer.
+ <http://www.ajeco.fi/products.htm>
+
+config ARCH_AT91RM9200DK
+ bool "Atmel AT91RM9200-DK Development board"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using Atmel's AT91RM9200-DK Development board.
+ (Discontinued)
+
+config MACH_AT91RM9200EK
+ bool "Atmel AT91RM9200-EK Evaluation Kit"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
+
+config MACH_CSB337
+ bool "Cogent CSB337"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using Cogent's CSB337 board.
+ <http://www.cogcomp.com/csb_csb337.htm>
+
+config MACH_CSB637
+ bool "Cogent CSB637"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using Cogent's CSB637 board.
+ <http://www.cogcomp.com/csb_csb637.htm>
+
+config MACH_CARMEVA
+ bool "Conitec ARM&EVA"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using Conitec's AT91RM9200-MCU-Module.
+ <http://www.conitec.net/english/linuxboard.htm>
+
+config MACH_ATEB9200
+ bool "Embest ATEB9200"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using Embest's ATEB9200 board.
+ <http://www.embedinfo.com/english/product/ATEB9200.asp>
+
+config MACH_KB9200
+ bool "KwikByte KB920x"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using KwikByte's KB920x board.
+ <http://kwikbyte.com/KB9202_description_new.htm>
+
+config MACH_KAFA
+ bool "Sperry-Sun KAFA board"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using Sperry-Sun's KAFA board.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Board Type"
+
+config MACH_AT91SAM9260EK
+ bool "Atmel AT91SAM9260-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9260
+ help
+ Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+ bool "Atmel AT91SAM9261-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9261
+ help
+ Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+endif
+
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+ bool "Enable DataFlash Card support"
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+ help
+ Enable support for the DataFlash card.
+
+config MTD_NAND_AT91_BUSWIDTH_16
+ bool "Enable 16-bit data bus interface to NAND flash"
+ depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+ help
+ On AT91SAM926x boards both types of NAND flash can be present
+ (8 and 16 bit data bus width).
+
+# ----------------------------------------------------------
+
+comment "AT91 Feature Selections"
+
+config AT91_PROGRAMMABLE_CLOCKS
+ bool "Programmable Clocks"
+ help
+ Select this if you need to program one or more of the PCK0..PCK3
+ programmable clock outputs.
+
+endmenu
+
+endif
--- /dev/null
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := clock.o irq.o gpio.o
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_PM) += pm.o
+
+# CPU-specific support
+obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
+
+# AT91RM9200 board-specific support
+obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
+obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
+obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
+obj-$(CONFIG_MACH_CSB337) += board-csb337.o
+obj-$(CONFIG_MACH_CSB637) += board-csb637.o
+obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
+obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
+obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
+obj-$(CONFIG_MACH_KAFA) += board-kafa.o
+
+# AT91SAM9260 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
+
+# AT91SAM9261 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+
+# LEDs support
+led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
+led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
+led-$(CONFIG_MACH_CSB337) += leds.o
+led-$(CONFIG_MACH_CSB637) += leds.o
+led-$(CONFIG_MACH_KB9200) += leds.o
+led-$(CONFIG_MACH_KAFA) += leds.o
+obj-$(CONFIG_LEDS) += $(led-y)
+
+# VGA support
+#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
+
+
+ifeq ($(CONFIG_PM_DEBUG),y)
+CFLAGS_pm.o += -DDEBUG
+endif
--- /dev/null
+# Note: the following conditions must always be true:
+# ZRELADDR == virt_to_phys(TEXTADDR)
+# PARAMS_PHYS must be within 4MB of ZRELADDR
+# INITRD_PHYS must be in RAM
+
+ zreladdr-y := 0x20008000
+params_phys-y := 0x20000100
+initrd_phys-y := 0x20410000
+
--- /dev/null
+/*
+ * arch/arm/mach-at91/at91rm9200.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91rm9200.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_st.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91rm9200_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_VA_BASE_EMAC,
+ .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE),
+ .length = AT91RM9200_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ether_clk = {
+ .name = "ether_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_US3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi_clk = {
+ .name = "spi_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_SPI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioD_clk = {
+ .name = "pioD_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_PIOD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &pioD_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &usart3_clk,
+ &mmc_clk,
+ &udc_clk,
+ &twi_clk,
+ &spi_clk,
+ // ssc 0 .. ssc2
+ // tc0 .. tc5
+ &ohci_clk,
+ ðer_clk,
+ // irq0 .. irq6
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+static void __init at91rm9200_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91rm9200_gpio[] = {
+ {
+ .id = AT91RM9200_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91RM9200_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91RM9200_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }, {
+ .id = AT91RM9200_ID_PIOD,
+ .offset = AT91_PIOD,
+ .clock = &pioD_clk,
+ }
+};
+
+static void at91rm9200_reset(void)
+{
+ /*
+ * Perform a hardware reset with the use of the Watchdog timer.
+ */
+ at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
+ at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91RM9200 processor initialization
+ * -------------------------------------------------------------------- */
+void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
+{
+ /* Map peripherals */
+ iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
+
+ at91_arch_reset = at91rm9200_reset;
+ at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
+ | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
+ | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
+ | (1 << AT91RM9200_ID_IRQ6);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91rm9200_register_clocks();
+
+ /* Initialize GPIO subsystem */
+ at91_gpio_init(at91rm9200_gpio, banks);
+}
+
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+ 0, /* Parallel IO Controller A */
+ 0, /* Parallel IO Controller B */
+ 0, /* Parallel IO Controller C */
+ 0, /* Parallel IO Controller D */
+ 6, /* USART 0 */
+ 6, /* USART 1 */
+ 6, /* USART 2 */
+ 6, /* USART 3 */
+ 0, /* Multimedia Card Interface */
+ 4, /* USB Device Port */
+ 0, /* Two-Wire Interface */
+ 6, /* Serial Peripheral Interface */
+ 5, /* Serial Synchronous Controller 0 */
+ 5, /* Serial Synchronous Controller 1 */
+ 5, /* Serial Synchronous Controller 2 */
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+ 0, /* Timer Counter 3 */
+ 0, /* Timer Counter 4 */
+ 0, /* Timer Counter 5 */
+ 3, /* USB Host port */
+ 3, /* Ethernet MAC */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+ 0, /* Advanced Interrupt Controller (IRQ1) */
+ 0, /* Advanced Interrupt Controller (IRQ2) */
+ 0, /* Advanced Interrupt Controller (IRQ3) */
+ 0, /* Advanced Interrupt Controller (IRQ4) */
+ 0, /* Advanced Interrupt Controller (IRQ5) */
+ 0 /* Advanced Interrupt Controller (IRQ6) */
+};
+
+void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91rm9200_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
--- /dev/null
+/*
+ * arch/arm/mach-at91/at91rm9200_devices.c
+ *
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200.h>
+#include <asm/arch/at91rm9200_mc.h>
+
+#include "generic.h"
+
+#define SZ_512 0x00000200
+#define SZ_256 0x00000100
+#define SZ_16 0x00000010
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT91RM9200_UHP_BASE,
+ .end = AT91RM9200_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_UHP,
+ .end = AT91RM9200_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ if (!data)
+ return;
+
+ usbh_data = *data;
+ platform_device_register(&at91rm9200_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_UDP,
+ .end = AT91RM9200_BASE_UDP + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_UDP,
+ .end = AT91RM9200_ID_UDP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_udc_device = {
+ .name = "at91_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &udc_data,
+ },
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->vbus_pin) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+ if (data->pullup_pin)
+ at91_set_gpio_output(data->pullup_pin, 0);
+
+ udc_data = *data;
+ platform_device_register(&at91rm9200_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_EMAC,
+ .end = AT91_VA_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_EMAC,
+ .end = AT91RM9200_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_eth_device = {
+ .name = "at91_ether",
+ .id = -1,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = ð_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PA16, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PA15, 0); /* EMDC */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PA11, 0); /* ECRS_ECRSDV */
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PA8, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* ETXCK_EREFCK */
+
+ if (!data->is_rmii) {
+ at91_set_B_periph(AT91_PIN_PB19, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PB18, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PB17, 0); /* ERXDV */
+ at91_set_B_periph(AT91_PIN_PB16, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PB15, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PB14, 0); /* ETXER */
+ at91_set_B_periph(AT91_PIN_PB13, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PB12, 0); /* ETX2 */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91rm9200_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Compact Flash / PCMCIA
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
+static struct at91_cf_data cf_data;
+
+#define CF_BASE AT91_CHIPSELECT_4
+
+static struct resource cf_resources[] = {
+ [0] = {
+ .start = CF_BASE,
+ /* ties up CS4, CS5 and CS6 */
+ .end = CF_BASE + (0x30000000 - 1),
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+ },
+};
+
+static struct platform_device at91rm9200_cf_device = {
+ .name = "at91_cf",
+ .id = -1,
+ .dev = {
+ .platform_data = &cf_data,
+ },
+ .resource = cf_resources,
+ .num_resources = ARRAY_SIZE(cf_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+ unsigned int csa;
+
+ if (!data)
+ return;
+
+ data->chipselect = 4; /* can only use EBI ChipSelect 4 */
+
+ /* CF takes over CS4, CS5, CS6 */
+ csa = at91_sys_read(AT91_EBI_CSA);
+ at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
+
+ /*
+ * Static memory controller timing adjustments.
+ * REVISIT: these timings are in terms of MCK cycles, so
+ * when MCK changes (cpufreq etc) so must these values...
+ */
+ at91_sys_write(AT91_SMC_CSR(4),
+ AT91_SMC_ACSS_STD
+ | AT91_SMC_DBW_16
+ | AT91_SMC_BAT
+ | AT91_SMC_WSEN
+ | AT91_SMC_NWS_(32) /* wait states */
+ | AT91_SMC_RWSETUP_(6) /* setup time */
+ | AT91_SMC_RWHOLD_(4) /* hold time */
+ );
+
+ /* input/irq */
+ if (data->irq_pin) {
+ at91_set_gpio_input(data->irq_pin, 1);
+ at91_set_deglitch(data->irq_pin, 1);
+ }
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+
+ /* outputs, initially off */
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+ at91_set_gpio_output(data->rst_pin, 0);
+
+ /* force poweron defaults for these pins ... */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* A25/CFRNW */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* NCS4/CFCS */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* NCS5/CFCE1 */
+ at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */
+
+ /* nWAIT is _not_ a default setting */
+ at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */
+
+ cf_data = *data;
+ platform_device_register(&at91rm9200_cf_device);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_MCI,
+ .end = AT91RM9200_BASE_MCI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_MCI,
+ .end = AT91RM9200_ID_MCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_mmc_device = {
+ .name = "at91_mci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+ .num_resources = ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA27, 0);
+
+ if (data->slot_b) {
+ /* CMD */
+ at91_set_B_periph(AT91_PIN_PA8, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_B_periph(AT91_PIN_PA9, 1);
+ if (data->wire4) {
+ at91_set_B_periph(AT91_PIN_PA10, 1);
+ at91_set_B_periph(AT91_PIN_PA11, 1);
+ at91_set_B_periph(AT91_PIN_PA12, 1);
+ }
+ } else {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA28, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA29, 1);
+ if (data->wire4) {
+ at91_set_B_periph(AT91_PIN_PB3, 1);
+ at91_set_B_periph(AT91_PIN_PB4, 1);
+ at91_set_B_periph(AT91_PIN_PB5, 1);
+ }
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at91rm9200_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91rm9200_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned int csa;
+
+ if (!data)
+ return;
+
+ /* enable the address range of CS3 */
+ csa = at91_sys_read(AT91_EBI_CSA);
+ at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
+ | AT91_SMC_NWS_(5)
+ | AT91_SMC_TDF_(1)
+ | AT91_SMC_RWSETUP_(0) /* tDS Data Set up Time 30 - ns */
+ | AT91_SMC_RWHOLD_(1) /* tDH Data Hold Time 20 - ns */
+ );
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* SMWE */
+
+ nand_data = *data;
+ platform_device_register(&at91rm9200_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_TWI,
+ .end = AT91RM9200_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_TWI,
+ .end = AT91RM9200_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+ /* pins used for TWI interface */
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PA25, 1);
+
+ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PA26, 1);
+
+ platform_device_register(&at91rm9200_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_SPI,
+ .end = AT91RM9200_BASE_SPI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_SPI,
+ .end = AT91RM9200_ID_SPI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_spi_device = {
+ .name = "at91_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi_resources,
+ .num_resources = ARRAY_SIZE(spi_resources),
+};
+
+static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPCK */
+
+ /* Enable SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else
+ cs_pin = spi_standard_cs[devices[i].chip_select];
+
+#ifdef CONFIG_SPI_AT91_MANUAL_CS
+ at91_set_gpio_output(cs_pin, 1);
+#else
+ at91_set_A_periph(cs_pin, 0);
+#endif
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+ at91_clock_associate("spi_clk", &at91rm9200_spi_device.dev, "spi");
+ platform_device_register(&at91rm9200_spi_device);
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTC
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct platform_device at91rm9200_rtc_device = {
+ .name = "at91_rtc",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_rtc(void)
+{
+ platform_device_register(&at91rm9200_rtc_device);
+}
+#else
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE)
+static struct platform_device at91rm9200_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91rm9200_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91rm9200_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .platform_data = &dbgu_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA31, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_US0,
+ .end = AT91RM9200_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_US0,
+ .end = AT91RM9200_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91rm9200_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .platform_data = &uart0_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
+
+ /*
+ * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
+ * We need to drive the pin manually. Default is off (RTS is active low).
+ */
+ at91_set_gpio_output(AT91_PIN_PA21, 1);
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_US1,
+ .end = AT91RM9200_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_US1,
+ .end = AT91RM9200_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91rm9200_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .platform_data = &uart1_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
+ at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
+ at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_US2,
+ .end = AT91RM9200_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_US2,
+ .end = AT91RM9200_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91rm9200_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .platform_data = &uart2_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */
+ at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */
+}
+
+static struct resource uart3_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_US3,
+ .end = AT91RM9200_BASE_US3 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_US3,
+ .end = AT91RM9200_ID_US3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart3_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91rm9200_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+ .platform_data = &uart3_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(void)
+{
+ at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
+ at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+ int i;
+
+ /* Fill in list of supported UARTs */
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+ configure_usart0_pins();
+ at91_uarts[i] = &at91rm9200_uart0_device;
+ at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
+ break;
+ case 1:
+ configure_usart1_pins();
+ at91_uarts[i] = &at91rm9200_uart1_device;
+ at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
+ break;
+ case 2:
+ configure_usart2_pins();
+ at91_uarts[i] = &at91rm9200_uart2_device;
+ at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
+ break;
+ case 3:
+ configure_usart3_pins();
+ at91_uarts[i] = &at91rm9200_uart3_device;
+ at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
+ break;
+ case 4:
+ configure_dbgu_pins();
+ at91_uarts[i] = &at91rm9200_dbgu_device;
+ at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
+ break;
+ default:
+ continue;
+ }
+ at91_uarts[i]->id = i; /* update ID number to mapped ID */
+ }
+
+ /* Set serial console device */
+ if (config->console_tty < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[config->console_tty];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ at91_add_device_rtc();
+ at91_add_device_watchdog();
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/at91rm9200_time.c
+ *
+ * Copyright (C) 2003 SAN People
+ * Copyright (C) 2003 ATMEL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/at91_st.h>
+
+static unsigned long last_crtr;
+
+/*
+ * The ST_CRTR is updated asynchronously to the master clock. It is therefore
+ * necessary to read it twice (with the same value) to ensure accuracy.
+ */
+static inline unsigned long read_CRTR(void) {
+ unsigned long x1, x2;
+
+ do {
+ x1 = at91_sys_read(AT91_ST_CRTR);
+ x2 = at91_sys_read(AT91_ST_CRTR);
+ } while (x1 != x2);
+
+ return x1;
+}
+
+/*
+ * Returns number of microseconds since last timer interrupt. Note that interrupts
+ * will have been disabled by do_gettimeofday()
+ * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ * 'tick' is usecs per jiffy (linux/timex.h).
+ */
+static unsigned long at91rm9200_gettimeoffset(void)
+{
+ unsigned long elapsed;
+
+ elapsed = (read_CRTR() - last_crtr) & AT91_ST_ALMV;
+
+ return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer.
+ */
+static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
+{
+ if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */
+ write_seqlock(&xtime_lock);
+
+ while (((read_CRTR() - last_crtr) & AT91_ST_ALMV) >= LATCH) {
+ timer_tick();
+ last_crtr = (last_crtr + LATCH) & AT91_ST_ALMV;
+ }
+
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+ }
+ else
+ return IRQ_NONE; /* not handled */
+}
+
+static struct irqaction at91rm9200_timer_irq = {
+ .name = "at91_tick",
+ .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
+ .handler = at91rm9200_timer_interrupt
+};
+
+void at91rm9200_timer_reset(void)
+{
+ last_crtr = 0;
+
+ /* Real time counter incremented every 30.51758 microseconds */
+ at91_sys_write(AT91_ST_RTMR, 1);
+
+ /* Set Period Interval timer */
+ at91_sys_write(AT91_ST_PIMR, LATCH);
+
+ /* Clear any pending interrupts */
+ (void) at91_sys_read(AT91_ST_SR);
+
+ /* Enable Period Interval Timer interrupt */
+ at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
+}
+
+/*
+ * Set up timer interrupt.
+ */
+void __init at91rm9200_timer_init(void)
+{
+ /* Disable all timer interrupts */
+ at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
+ (void) at91_sys_read(AT91_ST_SR); /* Clear any pending interrupts */
+
+ /* Make IRQs happen for the system timer */
+ setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
+
+ /* Change the kernel's 'tick' value to 10009 usec. (the default is 10000) */
+ tick_usec = (LATCH * 1000000) / CLOCK_TICK_RATE;
+
+ /* Initialize and enable the timer interrupt */
+ at91rm9200_timer_reset();
+}
+
+#ifdef CONFIG_PM
+static void at91rm9200_timer_suspend(void)
+{
+ /* disable Period Interval Timer interrupt */
+ at91_sys_write(AT91_ST_IDR, AT91_ST_PITS);
+}
+#else
+#define at91rm9200_timer_suspend NULL
+#endif
+
+struct sys_timer at91rm9200_timer = {
+ .init = at91rm9200_timer_init,
+ .offset = at91rm9200_gettimeoffset,
+ .suspend = at91rm9200_timer_suspend,
+ .resume = at91rm9200_timer_reset,
+};
+
--- /dev/null
+/*
+ * arch/arm/mach-at91/at91sam9260.c
+ *
+ * Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9260_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
+ .length = AT91SAM9260_SRAM0_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
+ .length = AT91SAM9260_SRAM1_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+ .name = "adc_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_ADC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ether_clk = {
+ .name = "ether_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_US3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart4_clk = {
+ .name = "usart4_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_US4,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart5_clk = {
+ .name = "usart5_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_US5,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &adc_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc_clk,
+ &udc_clk,
+ &twi_clk,
+ &spi0_clk,
+ &spi1_clk,
+ // ssc
+ // tc0 .. tc2
+ &ohci_clk,
+ ðer_clk,
+ &isi_clk,
+ &usart3_clk,
+ &usart4_clk,
+ &usart5_clk,
+ // tc3 .. tc5
+ // irq0 .. irq2
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+
+static void __init at91sam9260_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9260_gpio[] = {
+ {
+ .id = AT91SAM9260_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91SAM9260_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91SAM9260_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }
+};
+
+static void at91sam9260_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91SAM9260 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9260_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
+
+ at91_arch_reset = at91sam9260_reset;
+ at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
+ | (1 << AT91SAM9260_ID_IRQ2);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91sam9260_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9260_gpio, 3);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+ 0, /* Parallel IO Controller A */
+ 0, /* Parallel IO Controller B */
+ 0, /* Parallel IO Controller C */
+ 0, /* Analog-to-Digital Converter */
+ 6, /* USART 0 */
+ 6, /* USART 1 */
+ 6, /* USART 2 */
+ 0, /* Multimedia Card Interface */
+ 4, /* USB Device Port */
+ 0, /* Two-Wire Interface */
+ 6, /* Serial Peripheral Interface 0 */
+ 6, /* Serial Peripheral Interface 1 */
+ 5, /* Serial Synchronous Controller */
+ 0,
+ 0,
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+ 3, /* USB Host port */
+ 3, /* Ethernet */
+ 0, /* Image Sensor Interface */
+ 6, /* USART 3 */
+ 6, /* USART 4 */
+ 6, /* USART 5 */
+ 0, /* Timer Counter 3 */
+ 0, /* Timer Counter 4 */
+ 0, /* Timer Counter 5 */
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+};
+
+void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91sam9260_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
--- /dev/null
+/*
+ * arch/arm/mach-at91/at91sam9260_devices.c
+ *
+ * Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9260.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9260_matrix.h>
+
+#include "generic.h"
+
+#define SZ_512 0x00000200
+#define SZ_256 0x00000100
+#define SZ_16 0x00000010
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_UHP_BASE,
+ .end = AT91SAM9260_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_UHP,
+ .end = AT91SAM9260_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ if (!data)
+ return;
+
+ usbh_data = *data;
+ platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_UDP,
+ .end = AT91SAM9260_BASE_UDP + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_UDP,
+ .end = AT91SAM9260_ID_UDP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_udc_device = {
+ .name = "at91_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &udc_data,
+ },
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->vbus_pin) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ udc_data = *data;
+ platform_device_register(&at91_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_EMAC,
+ .end = AT91SAM9260_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_EMAC,
+ .end = AT91SAM9260_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = ð_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91sam9260_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_MCI,
+ .end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_MCI,
+ .end = AT91SAM9260_ID_MCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_mmc_device = {
+ .name = "at91_mci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+ .num_resources = ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA8, 0);
+
+ if (data->slot_b) {
+ /* CMD */
+ at91_set_B_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_B_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_B_periph(AT91_PIN_PA5, 1);
+ at91_set_B_periph(AT91_PIN_PA4, 1);
+ at91_set_B_periph(AT91_PIN_PA3, 1);
+ }
+ } else {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA7, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA6, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA9, 1);
+ at91_set_A_periph(AT91_PIN_PA10, 1);
+ at91_set_A_periph(AT91_PIN_PA11, 1);
+ }
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at91sam9260_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9260_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa, mode;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
+ | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91sam9260_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_TWI,
+ .end = AT91SAM9260_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_TWI,
+ .end = AT91SAM9260_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+ /* pins used for TWI interface */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PA23, 1);
+
+ at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PA24, 1);
+
+ platform_device_register(&at91sam9260_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_SPI0,
+ .end = AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_SPI0,
+ .end = AT91SAM9260_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_SPI1,
+ .end = AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_SPI1,
+ .end = AT91SAM9260_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91sam9260_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91sam9260_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9260_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .platform_data = &dbgu_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_US0,
+ .end = AT91SAM9260_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_US0,
+ .end = AT91SAM9260_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9260_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .platform_data = &uart0_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_US1,
+ .end = AT91SAM9260_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_US1,
+ .end = AT91SAM9260_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9260_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .platform_data = &uart1_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_US2,
+ .end = AT91SAM9260_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_US2,
+ .end = AT91SAM9260_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9260_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .platform_data = &uart2_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
+}
+
+static struct resource uart3_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_US3,
+ .end = AT91SAM9260_BASE_US3 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_US3,
+ .end = AT91SAM9260_ID_US3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart3_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9260_uart3_device = {
+ .name = "atmel_usart",
+ .id = 4,
+ .dev = {
+ .platform_data = &uart3_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart3_resources,
+ .num_resources = ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
+}
+
+static struct resource uart4_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_US4,
+ .end = AT91SAM9260_BASE_US4 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_US4,
+ .end = AT91SAM9260_ID_US4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart4_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9260_uart4_device = {
+ .name = "atmel_usart",
+ .id = 5,
+ .dev = {
+ .platform_data = &uart4_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart4_resources,
+ .num_resources = ARRAY_SIZE(uart4_resources),
+};
+
+static inline void configure_usart4_pins(void)
+{
+ at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */
+ at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */
+}
+
+static struct resource uart5_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_US5,
+ .end = AT91SAM9260_BASE_US5 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_US5,
+ .end = AT91SAM9260_ID_US5,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart5_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9260_uart5_device = {
+ .name = "atmel_usart",
+ .id = 6,
+ .dev = {
+ .platform_data = &uart5_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart5_resources,
+ .num_resources = ARRAY_SIZE(uart5_resources),
+};
+
+static inline void configure_usart5_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+ int i;
+
+ /* Fill in list of supported UARTs */
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+ configure_usart0_pins();
+ at91_uarts[i] = &at91sam9260_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
+ break;
+ case 1:
+ configure_usart1_pins();
+ at91_uarts[i] = &at91sam9260_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
+ break;
+ case 2:
+ configure_usart2_pins();
+ at91_uarts[i] = &at91sam9260_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
+ break;
+ case 3:
+ configure_usart3_pins();
+ at91_uarts[i] = &at91sam9260_uart3_device;
+ at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
+ break;
+ case 4:
+ configure_usart4_pins();
+ at91_uarts[i] = &at91sam9260_uart4_device;
+ at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart");
+ break;
+ case 5:
+ configure_usart5_pins();
+ at91_uarts[i] = &at91sam9260_uart5_device;
+ at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart");
+ break;
+ case 6:
+ configure_dbgu_pins();
+ at91_uarts[i] = &at91sam9260_dbgu_device;
+ at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart");
+ break;
+ default:
+ continue;
+ }
+ at91_uarts[i]->id = i; /* update ID number to mapped ID */
+ }
+
+ /* Set serial console device */
+ if (config->console_tty < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[config->console_tty];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
--- /dev/null
+/*
+ * arch/arm/mach-at91/at91sam9261.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9261_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE),
+ .length = AT91SAM9261_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+ .name = "pioC_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_PIOC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_MCI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioC_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc_clk,
+ &udc_clk,
+ &twi_clk,
+ &spi0_clk,
+ &spi1_clk,
+ // ssc 0 .. ssc2
+ // tc0 .. tc2
+ &ohci_clk,
+ &lcdc_clk,
+ // irq0 .. irq2
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+/* HClocks */
+static struct clk hck0 = {
+ .name = "hck0",
+ .pmc_mask = AT91_PMC_HCK0,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 0,
+};
+static struct clk hck1 = {
+ .name = "hck1",
+ .pmc_mask = AT91_PMC_HCK1,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 1,
+};
+
+static void __init at91sam9261_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+
+ clk_register(&hck0);
+ clk_register(&hck1);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9261_gpio[] = {
+ {
+ .id = AT91SAM9261_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91SAM9261_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91SAM9261_ID_PIOC,
+ .offset = AT91_PIOC,
+ .clock = &pioC_clk,
+ }
+};
+
+static void at91sam9261_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91SAM9261 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9261_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
+
+ at91_arch_reset = at91sam9261_reset;
+ at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
+ | (1 << AT91SAM9261_ID_IRQ2);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91sam9261_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9261_gpio, 3);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller */
+ 7, /* System Peripherals */
+ 0, /* Parallel IO Controller A */
+ 0, /* Parallel IO Controller B */
+ 0, /* Parallel IO Controller C */
+ 0,
+ 6, /* USART 0 */
+ 6, /* USART 1 */
+ 6, /* USART 2 */
+ 0, /* Multimedia Card Interface */
+ 4, /* USB Device Port */
+ 0, /* Two-Wire Interface */
+ 6, /* Serial Peripheral Interface 0 */
+ 6, /* Serial Peripheral Interface 1 */
+ 5, /* Serial Synchronous Controller 0 */
+ 5, /* Serial Synchronous Controller 1 */
+ 5, /* Serial Synchronous Controller 2 */
+ 0, /* Timer Counter 0 */
+ 0, /* Timer Counter 1 */
+ 0, /* Timer Counter 2 */
+ 3, /* USB Host port */
+ 3, /* LCD Controller */
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0,
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+ 0, /* Advanced Interrupt Controller */
+};
+
+void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91sam9261_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
--- /dev/null
+/*
+ * arch/arm/mach-at91/at91sam9261_devices.c
+ *
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91sam9261_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+#define SZ_512 0x00000200
+#define SZ_256 0x00000100
+#define SZ_16 0x00000010
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_UHP_BASE,
+ .end = AT91SAM9261_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_UHP,
+ .end = AT91SAM9261_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ if (!data)
+ return;
+
+ usbh_data = *data;
+ platform_device_register(&at91sam9261_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_UDP,
+ .end = AT91SAM9261_BASE_UDP + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_UDP,
+ .end = AT91SAM9261_ID_UDP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_udc_device = {
+ .name = "at91_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &udc_data,
+ },
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+ unsigned long x;
+
+ if (!data)
+ return;
+
+ if (data->vbus_pin) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+
+ /* Pullup pin is handled internally */
+ x = at91_sys_read(AT91_MATRIX_USBPUCR);
+ at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
+
+ udc_data = *data;
+ platform_device_register(&at91sam9261_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc_data;
+
+static struct resource mmc_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_MCI,
+ .end = AT91SAM9261_BASE_MCI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_MCI,
+ .end = AT91SAM9261_ID_MCI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_mmc_device = {
+ .name = "at91_mci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc_data,
+ },
+ .resource = mmc_resources,
+ .num_resources = ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mmc(struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ /* CLK */
+ at91_set_B_periph(AT91_PIN_PA2, 0);
+
+ /* CMD */
+ at91_set_B_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_B_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_B_periph(AT91_PIN_PA4, 1);
+ at91_set_B_periph(AT91_PIN_PA5, 1);
+ at91_set_B_periph(AT91_PIN_PA6, 1);
+ }
+
+ mmc_data = *data;
+ platform_device_register(&at91sam9261_mmc_device);
+}
+#else
+void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa, mode;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
+ | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */
+
+ nand_data = *data;
+ platform_device_register(&at91_nand_device);
+}
+
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_TWI,
+ .end = AT91SAM9261_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_TWI,
+ .end = AT91SAM9261_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+ /* pins used for TWI interface */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PA7, 1);
+
+ at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PA8, 1);
+
+ platform_device_register(&at91sam9261_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SPI0,
+ .end = AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SPI0,
+ .end = AT91SAM9261_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SPI1,
+ .end = AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SPI1,
+ .end = AT91SAM9261_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91sam9261_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91sam9261_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
+static u64 lcdc_dmamask = 0xffffffffUL;
+static struct at91fb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_LCDC_BASE,
+ .end = AT91SAM9261_LCDC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_LCDC,
+ .end = AT91SAM9261_ID_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+#if defined(CONFIG_FB_INTSRAM)
+ [2] = {
+ .start = AT91SAM9261_SRAM_BASE,
+ .end = AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+};
+
+static struct platform_device at91_lcdc_device = {
+ .name = "at91-fb",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct at91fb_info *data)
+{
+ if (!data) {
+ return;
+ }
+
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */
+ at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */
+ at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */
+ at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
+ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
+ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct at91fb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9261_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .platform_data = &dbgu_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_US0,
+ .end = AT91SAM9261_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_US0,
+ .end = AT91SAM9261_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9261_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .platform_data = &uart0_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_US1,
+ .end = AT91SAM9261_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_US1,
+ .end = AT91SAM9261_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9261_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .platform_data = &uart1_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_US2,
+ .end = AT91SAM9261_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_US2,
+ .end = AT91SAM9261_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9261_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .platform_data = &uart2_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
+ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+ int i;
+
+ /* Fill in list of supported UARTs */
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+ configure_usart0_pins();
+ at91_uarts[i] = &at91sam9261_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
+ break;
+ case 1:
+ configure_usart1_pins();
+ at91_uarts[i] = &at91sam9261_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
+ break;
+ case 2:
+ configure_usart2_pins();
+ at91_uarts[i] = &at91sam9261_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
+ break;
+ case 3:
+ configure_dbgu_pins();
+ at91_uarts[i] = &at91sam9261_dbgu_device;
+ at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart");
+ break;
+ default:
+ continue;
+ }
+ at91_uarts[i]->id = i; /* update ID number to mapped ID */
+ }
+
+ /* Set serial console device */
+ if (config->console_tty < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[config->console_tty];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/at91sam926x_time.c
+ *
+ * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
+ * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/at91_pit.h>
+
+
+#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
+#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)
+
+/*
+ * Returns number of microseconds since last timer interrupt. Note that interrupts
+ * will have been disabled by do_gettimeofday()
+ * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ * 'tick' is usecs per jiffy (linux/timex.h).
+ */
+static unsigned long at91sam926x_gettimeoffset(void)
+{
+ unsigned long elapsed;
+ unsigned long t = at91_sys_read(AT91_PIT_PIIR);
+
+ elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
+
+ return (unsigned long)(elapsed * 1000000) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer.
+ */
+static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
+{
+ volatile long nr_ticks;
+
+ if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */
+ write_seqlock(&xtime_lock);
+
+ /* Get number to ticks performed before interrupt and clear PIT interrupt */
+ nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
+ do {
+ timer_tick();
+ nr_ticks--;
+ } while (nr_ticks);
+
+ write_sequnlock(&xtime_lock);
+ return IRQ_HANDLED;
+ } else
+ return IRQ_NONE; /* not handled */
+}
+
+static struct irqaction at91sam926x_timer_irq = {
+ .name = "at91_tick",
+ .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
+ .handler = at91sam926x_timer_interrupt
+};
+
+void at91sam926x_timer_reset(void)
+{
+ /* Disable timer */
+ at91_sys_write(AT91_PIT_MR, 0);
+
+ /* Clear any pending interrupts */
+ (void) at91_sys_read(AT91_PIT_PIVR);
+
+ /* Set Period Interval timer and enable its interrupt */
+ at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
+}
+
+/*
+ * Set up timer interrupt.
+ */
+void __init at91sam926x_timer_init(void)
+{
+ /* Initialize and enable the timer */
+ at91sam926x_timer_reset();
+
+ /* Make IRQs happen for the system timer. */
+ setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
+}
+
+#ifdef CONFIG_PM
+static void at91sam926x_timer_suspend(void)
+{
+ /* Disable timer */
+ at91_sys_write(AT91_PIT_MR, 0);
+}
+#else
+#define at91sam926x_timer_suspend NULL
+#endif
+
+struct sys_timer at91sam926x_timer = {
+ .init = at91sam926x_timer_init,
+ .offset = at91sam926x_gettimeoffset,
+ .suspend = at91sam926x_timer_suspend,
+ .resume = at91sam926x_timer_reset,
+};
+
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-1arm.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata onearm_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 3,
+ .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */
+};
+
+static void __init onearm_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&onearm_uart_config);
+}
+
+static void __init onearm_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata onearm_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata onearm_usbh_data = {
+ .ports = 1,
+};
+
+static struct at91_udc_data __initdata onearm_udc_data = {
+ .vbus_pin = AT91_PIN_PC2,
+ .pullup_pin = AT91_PIN_PC3,
+};
+
+static void __init onearm_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&onearm_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&onearm_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&onearm_udc_data);
+}
+
+MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = onearm_map_io,
+ .init_irq = onearm_init_irq,
+ .init_machine = onearm_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-carmeva.c
+ *
+ * Copyright (c) 2005 Peer Georgi
+ * Conitec Datasystems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata carmeva_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 2,
+ .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+};
+
+static void __init carmeva_map_io(void)
+{
+ /* Initialize processor: 20.000 MHz crystal */
+ at91rm9200_initialize(20000000, AT91RM9200_BGA);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&carmeva_uart_config);
+}
+
+static void __init carmeva_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata carmeva_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata carmeva_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata carmeva_udc_data = {
+ .vbus_pin = AT91_PIN_PD12,
+ .pullup_pin = AT91_PIN_PD9,
+};
+
+/* FIXME: user dependend */
+// static struct at91_cf_data __initdata carmeva_cf_data = {
+// .det_pin = AT91_PIN_PB0,
+// .rst_pin = AT91_PIN_PC5,
+ // .irq_pin = ... not connected
+ // .vcc_pin = ... always powered
+// };
+
+static struct at91_mmc_data __initdata carmeva_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PB10,
+ .wp_pin = AT91_PIN_PC14,
+};
+
+static struct spi_board_info carmeva_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 10 * 1000 * 1000,
+ },
+ { /* User accessable spi - cs1 (250KHz) */
+ .modalias = "spi-cs1",
+ .chip_select = 1,
+ .max_speed_hz = 250 * 1000,
+ },
+ { /* User accessable spi - cs2 (1MHz) */
+ .modalias = "spi-cs2",
+ .chip_select = 2,
+ .max_speed_hz = 1 * 1000 * 1000,
+ },
+ { /* User accessable spi - cs3 (10MHz) */
+ .modalias = "spi-cs3",
+ .chip_select = 3,
+ .max_speed_hz = 10 * 1000 * 1000,
+ },
+};
+
+static void __init carmeva_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&carmeva_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&carmeva_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&carmeva_udc_data);
+ /* I2C */
+ at91_add_device_i2c();
+ /* SPI */
+ at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
+ /* Compact Flash */
+// at91_add_device_cf(&carmeva_cf_data);
+ /* MMC */
+ at91_add_device_mmc(&carmeva_mmc_data);
+}
+
+MACHINE_START(CARMEVA, "Carmeva")
+ /* Maintainer: Conitec Datasystems */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = carmeva_map_io,
+ .init_irq = carmeva_init_irq,
+ .init_machine = carmeva_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-csb337.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata csb337_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 2,
+ .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+};
+
+static void __init csb337_map_io(void)
+{
+ /* Initialize processor: 3.6864 MHz crystal */
+ at91rm9200_initialize(3686400, AT91RM9200_BGA);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&csb337_uart_config);
+}
+
+static void __init csb337_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata csb337_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC2,
+ .is_rmii = 0,
+};
+
+static struct at91_usbh_data __initdata csb337_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata csb337_udc_data = {
+ // this has no VBUS sensing pin
+ .pullup_pin = AT91_PIN_PA24,
+};
+
+static struct at91_cf_data __initdata csb337_cf_data = {
+ /*
+ * connector P4 on the CSB 337 mates to
+ * connector P8 on the CSB 300CF
+ */
+
+ /* CSB337 specific */
+ .det_pin = AT91_PIN_PC3,
+
+ /* CSB300CF specific */
+ .irq_pin = AT91_PIN_PA19,
+ .vcc_pin = AT91_PIN_PD0,
+ .rst_pin = AT91_PIN_PD2,
+};
+
+static struct at91_mmc_data __initdata csb337_mmc_data = {
+ .det_pin = AT91_PIN_PD5,
+ .slot_b = 0,
+ .wire4 = 1,
+ .wp_pin = AT91_PIN_PD6,
+};
+
+static struct spi_board_info csb337_spi_devices[] = {
+ { /* CAN controller */
+ .modalias = "sak82c900",
+ .chip_select = 0,
+ .max_speed_hz = 6 * 1000 * 1000,
+ },
+};
+
+static void __init csb337_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&csb337_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&csb337_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&csb337_udc_data);
+ /* I2C */
+ at91_add_device_i2c();
+ /* Compact Flash */
+ at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
+ at91_add_device_cf(&csb337_cf_data);
+ /* SPI */
+ at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(&csb337_mmc_data);
+}
+
+MACHINE_START(CSB337, "Cogent CSB337")
+ /* Maintainer: Bill Gatliff */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = csb337_map_io,
+ .init_irq = csb337_init_irq,
+ .init_machine = csb337_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-csb637.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata csb637_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 2,
+ .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+};
+
+static void __init csb637_map_io(void)
+{
+ /* Initialize processor: 3.6864 MHz crystal */
+ at91rm9200_initialize(3686400, AT91RM9200_BGA);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&csb637_uart_config);
+}
+
+static void __init csb637_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata csb637_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC0,
+ .is_rmii = 0,
+};
+
+static struct at91_usbh_data __initdata csb637_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata csb637_udc_data = {
+ .vbus_pin = AT91_PIN_PB28,
+ .pullup_pin = AT91_PIN_PB1,
+};
+
+static void __init csb637_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&csb637_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&csb637_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&csb637_udc_data);
+ /* I2C */
+ at91_add_device_i2c();
+ /* SPI */
+ at91_add_device_spi(NULL, 0);
+}
+
+MACHINE_START(CSB637, "Cogent CSB637")
+ /* Maintainer: Bill Gatliff */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = csb637_map_io,
+ .init_irq = csb637_init_irq,
+ .init_machine = csb637_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-dk.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * Epson S1D framebuffer glue code is:
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata dk_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 2,
+ .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+};
+
+static void __init dk_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&dk_uart_config);
+}
+
+static void __init dk_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata dk_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata dk_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata dk_udc_data = {
+ .vbus_pin = AT91_PIN_PD4,
+ .pullup_pin = AT91_PIN_PD5,
+};
+
+static struct at91_cf_data __initdata dk_cf_data = {
+ .det_pin = AT91_PIN_PB0,
+ .rst_pin = AT91_PIN_PC5,
+ // .irq_pin = ... not connected
+ // .vcc_pin = ... always powered
+};
+
+static struct at91_mmc_data __initdata dk_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 1,
+};
+
+static struct spi_board_info dk_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+ { /* UR6HCPS2-SP40 PS2-to-SPI adapter */
+ .modalias = "ur6hcps2",
+ .chip_select = 1,
+ .max_speed_hz = 250 * 1000,
+ },
+ { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
+ .modalias = "tlv1504",
+ .chip_select = 2,
+ .max_speed_hz = 20 * 1000 * 1000,
+ },
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 3,
+ .max_speed_hz = 15 * 1000 * 1000,
+ }
+#endif
+};
+
+static struct mtd_partition __initdata dk_nand_partition[] = {
+ {
+ .name = "NAND Partition 1",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(dk_nand_partition);
+ return dk_nand_partition;
+}
+
+static struct at91_nand_data __initdata dk_nand_data = {
+ .ale = 22,
+ .cle = 21,
+ .det_pin = AT91_PIN_PB1,
+ .rdy_pin = AT91_PIN_PC2,
+ // .enable_pin = ... not there
+ .partition_info = nand_partitions,
+};
+
+#define DK_FLASH_BASE AT91_CHIPSELECT_0
+#define DK_FLASH_SIZE 0x200000
+
+static struct physmap_flash_data dk_flash_data = {
+ .width = 2,
+};
+
+static struct resource dk_flash_resource = {
+ .start = DK_FLASH_BASE,
+ .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device dk_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &dk_flash_data,
+ },
+ .resource = &dk_flash_resource,
+ .num_resources = 1,
+};
+
+
+static void __init dk_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&dk_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&dk_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&dk_udc_data);
+ at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
+ /* Compact Flash */
+ at91_add_device_cf(&dk_cf_data);
+ /* I2C */
+ at91_add_device_i2c();
+ /* SPI */
+ at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ /* DataFlash card */
+ at91_set_gpio_output(AT91_PIN_PB7, 0);
+#else
+ /* MMC */
+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
+ at91_add_device_mmc(&dk_mmc_data);
+#endif
+ /* NAND */
+ at91_add_device_nand(&dk_nand_data);
+ /* NOR Flash */
+ platform_device_register(&dk_flash);
+ /* VGA */
+// dk_add_device_video();
+}
+
+MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
+ /* Maintainer: SAN People/Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = dk_map_io,
+ .init_irq = dk_init_irq,
+ .init_machine = dk_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-eb9200.c
+ *
+ * Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
+ * by Andrew Patrikalakis
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata eb9200_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 2,
+ .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+};
+
+static void __init eb9200_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&eb9200_uart_config);
+}
+
+static void __init eb9200_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata eb9200_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata eb9200_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata eb9200_udc_data = {
+ .vbus_pin = AT91_PIN_PD4,
+ .pullup_pin = AT91_PIN_PD5,
+};
+
+static struct at91_cf_data __initdata eb9200_cf_data = {
+ .det_pin = AT91_PIN_PB0,
+ .rst_pin = AT91_PIN_PC5,
+ // .irq_pin = ... not connected
+ // .vcc_pin = ... always powered
+};
+
+static struct at91_mmc_data __initdata eb9200_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 1,
+};
+
+static void __init eb9200_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&eb9200_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&eb9200_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&eb9200_udc_data);
+ /* I2C */
+ at91_add_device_i2c();
+ /* Compact Flash */
+ at91_add_device_cf(&eb9200_cf_data);
+ /* SPI */
+ at91_add_device_spi(NULL, 0);
+ /* MMC */
+ /* only supports 1 or 4 bit interface, not wired through to SPI */
+ at91_add_device_mmc(&eb9200_mmc_data);
+}
+
+MACHINE_START(ATEB9200, "Embest ATEB9200")
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = eb9200_map_io,
+ .init_irq = eb9200_init_irq,
+ .init_machine = eb9200_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-ek.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * Epson S1D framebuffer glue code is:
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 2,
+ .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+};
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata ek_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PD4,
+ .pullup_pin = AT91_PIN_PD5,
+};
+
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .det_pin = AT91_PIN_PB27,
+ .slot_b = 0,
+ .wire4 = 1,
+ .wp_pin = AT91_PIN_PA17,
+};
+
+static struct spi_board_info ek_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 3,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+#endif
+};
+
+#define EK_FLASH_BASE AT91_CHIPSELECT_0
+#define EK_FLASH_SIZE 0x200000
+
+static struct physmap_flash_data ek_flash_data = {
+ .width = 2,
+};
+
+static struct resource ek_flash_resource = {
+ .start = EK_FLASH_BASE,
+ .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ek_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ek_flash_data,
+ },
+ .resource = &ek_flash_resource,
+ .num_resources = 1,
+};
+
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&ek_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
+ /* I2C */
+ at91_add_device_i2c();
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ /* DataFlash card */
+ at91_set_gpio_output(AT91_PIN_PB22, 0);
+#else
+ /* MMC */
+ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
+ at91_add_device_mmc(&ek_mmc_data);
+#endif
+ /* NOR Flash */
+ platform_device_register(&ek_flash);
+ /* VGA */
+// ek_add_device_video();
+}
+
+MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
+ /* Maintainer: SAN People/Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-kafa.c
+ *
+ * Copyright (C) 2006 Sperry-Sun
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata kafa_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 2,
+ .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+};
+
+static void __init kafa_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+ /* Set up the LEDs */
+ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&kafa_uart_config);
+}
+
+static void __init kafa_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata kafa_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 0,
+};
+
+static struct at91_usbh_data __initdata kafa_usbh_data = {
+ .ports = 1,
+};
+
+static struct at91_udc_data __initdata kafa_udc_data = {
+ .vbus_pin = AT91_PIN_PB6,
+ .pullup_pin = AT91_PIN_PB7,
+};
+
+static void __init kafa_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&kafa_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&kafa_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&kafa_udc_data);
+ /* I2C */
+ at91_add_device_i2c();
+ /* SPI */
+ at91_add_device_spi(NULL, 0);
+}
+
+MACHINE_START(KAFA, "Sperry-Sun KAFA")
+ /* Maintainer: Sergei Sharonov */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = kafa_map_io,
+ .init_irq = kafa_init_irq,
+ .init_machine = kafa_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-kb9202.c
+ *
+ * Copyright (c) 2005 kb_admin
+ * KwikByte, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata kb9202_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 3,
+ .tty_map = { 4, 0, 1, -1, -1 } /* ttyS0, ..., ttyS4 */
+};
+
+static void __init kb9202_map_io(void)
+{
+ /* Initialize processor: 10 MHz crystal */
+ at91rm9200_initialize(10000000, AT91RM9200_PQFP);
+
+ /* Set up the LEDs */
+ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&kb9202_uart_config);
+}
+
+static void __init kb9202_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata kb9202_eth_data = {
+ .phy_irq_pin = AT91_PIN_PB29,
+ .is_rmii = 0,
+};
+
+static struct at91_usbh_data __initdata kb9202_usbh_data = {
+ .ports = 1,
+};
+
+static struct at91_udc_data __initdata kb9202_udc_data = {
+ .vbus_pin = AT91_PIN_PB24,
+ .pullup_pin = AT91_PIN_PB22,
+};
+
+static struct at91_mmc_data __initdata kb9202_mmc_data = {
+ .det_pin = AT91_PIN_PB2,
+ .slot_b = 0,
+ .wire4 = 1,
+};
+
+static struct mtd_partition __initdata kb9202_nand_partition[] = {
+ {
+ .name = "nand_fs",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(kb9202_nand_partition);
+ return kb9202_nand_partition;
+}
+
+static struct at91_nand_data __initdata kb9202_nand_data = {
+ .ale = 22,
+ .cle = 21,
+ // .det_pin = ... not there
+ .rdy_pin = AT91_PIN_PC29,
+ .enable_pin = AT91_PIN_PC28,
+ .partition_info = nand_partitions,
+};
+
+static void __init kb9202_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&kb9202_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&kb9202_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&kb9202_udc_data);
+ /* MMC */
+ at91_add_device_mmc(&kb9202_mmc_data);
+ /* I2C */
+ at91_add_device_i2c();
+ /* SPI */
+ at91_add_device_spi(NULL, 0);
+ /* NAND */
+ at91_add_device_nand(&kb9202_nand_data);
+}
+
+MACHINE_START(KB9200, "KB920x")
+ /* Maintainer: KwikByte, Inc. */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = kb9202_map_io,
+ .init_irq = kb9202_init_irq,
+ .init_machine = kb9202_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-ek.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 5 = USART0 .. USART5
+ * 6 = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 3,
+ .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
+};
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91sam9260_initialize(18432000);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PC5,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 1,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+#endif
+#if defined(CONFIG_SND_AT73C213)
+ { /* AT73C213 DAC */
+ .modalias = "snd_at73c213",
+ .chip_select = 0,
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 1,
+ },
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct __initdata at91_eth_data ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PA7,
+ .is_rmii = 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = 256 * 1024,
+ },
+ {
+ .name = "Partition 2",
+ .offset = 256 * 1024,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PC13,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .slot_b = 1,
+ .wire4 = 1,
+// .det_pin = ... not connected
+// .wp_pin = ... not connected
+// .vcc_pin = ... not connected
+};
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* NAND */
+ at91_add_device_nand(&ek_nand_data);
+ /* Ethernet */
+ at91_add_device_eth(&ek_macb_data);
+ /* MMC */
+ at91_add_device_mmc(&ek_mmc_data);
+}
+
+MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-ek.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/dm9000.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ * 0 .. 2 = USART0 .. USART2
+ * 3 = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 1,
+ .tty_map = { 3, -1, -1, -1 } /* ttyS0, ..., ttyS3 */
+};
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91sam9261_initialize(18432000);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91sam9261_init_interrupts(NULL);
+}
+
+
+/*
+ * DM9000 ethernet device
+ */
+#if defined(CONFIG_DM9000)
+static struct resource at91sam9261_dm9000_resource[] = {
+ [0] = {
+ .start = AT91_CHIPSELECT_2,
+ .end = AT91_CHIPSELECT_2 + 3,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = {
+ .start = AT91_CHIPSELECT_2 + 0x44,
+ .end = AT91_CHIPSELECT_2 + 0xFF,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = {
+ .start = AT91_PIN_PC11,
+ .end = AT91_PIN_PC11,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct dm9000_plat_data dm9000_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device at91sam9261_dm9000_device = {
+ .name = "dm9000",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(at91sam9261_dm9000_resource),
+ .resource = at91sam9261_dm9000_resource,
+ .dev = {
+ .platform_data = &dm9000_platdata,
+ }
+};
+
+static void __init ek_add_device_dm9000(void)
+{
+ /*
+ * Configure Chip-Select 2 on SMC for the DM9000.
+ * Note: These timings were calculated for MASTER_CLOCK = 100000000
+ * according to the DM9000 timings.
+ */
+ at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(2), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
+ at91_sys_write(AT91_SMC_CYCLE(2), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+ at91_sys_write(AT91_SMC_MODE(2), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
+
+ /* Configure Reset signal as output */
+ at91_set_gpio_output(AT91_PIN_PC10, 0);
+
+ /* Configure Interrupt pin as input, no pull-up */
+ at91_set_gpio_input(AT91_PIN_PC11, 0);
+
+ platform_device_register(&at91sam9261_dm9000_device);
+}
+#else
+static void __init ek_add_device_dm9000(void) {}
+#endif /* CONFIG_DM9000 */
+
+
+/*
+ * USB Host Port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+
+/*
+ * USB Device Port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PB29,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .wire4 = 1,
+// .det_pin = ... not connected
+// .wp_pin = ... not connected
+// .vcc_pin = ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "Partition 1",
+ .offset = 0,
+ .size = 256 * 1024,
+ },
+ {
+ .name = "Partition 2",
+ .offset = 256 * 1024 ,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+ .ale = 22,
+ .cle = 21,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PC15,
+ .enable_pin = AT91_PIN_PC14,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info ek_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
+ .modalias = "mtd_dataflash",
+ .chip_select = 3,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#elif defined(CONFIG_SND_AT73C213)
+ { /* AT73C213 DAC */
+ .modalias = "snd_at73c213",
+ .chip_select = 3,
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+};
+
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ /* I2C */
+ at91_add_device_i2c();
+ /* NAND */
+ at91_add_device_nand(&ek_nand_data);
+ /* DM9000 ethernet */
+ ek_add_device_dm9000();
+
+ /* spi0 and mmc/sd share the same PIO pins */
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+#else
+ /* MMC */
+ at91_add_device_mmc(&ek_mmc_data);
+#endif
+}
+
+MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+ /* Maintainer: Atmel */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/clock.c
+ *
+ * Copyright (C) 2005 David Brownell
+ * Copyright (C) 2005 Ivan Kokshaysky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <asm/semaphore.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/cpu.h>
+
+#include "clock.h"
+
+
+/*
+ * There's a lot more which can be done with clocks, including cpufreq
+ * integration, slow clock mode support (for system suspend), letting
+ * PLLB be used at other rates (on boards that don't need USB), etc.
+ */
+
+#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_peripheral(x) ((x)->type & CLK_TYPE_PERIPHERAL)
+#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM)
+
+
+static LIST_HEAD(clocks);
+static DEFINE_SPINLOCK(clk_lock);
+
+static u32 at91_pllb_usb_init;
+
+/*
+ * Four primary clock sources: two crystal oscillators (32K, main), and
+ * two PLLs. PLLA usually runs the master clock; and PLLB must run at
+ * 48 MHz (unless no USB function clocks are needed). The main clock and
+ * both PLLs are turned off to run in "slow clock mode" (system suspend).
+ */
+static struct clk clk32k = {
+ .name = "clk32k",
+ .rate_hz = AT91_SLOW_CLOCK,
+ .users = 1, /* always on */
+ .id = 0,
+ .type = CLK_TYPE_PRIMARY,
+};
+static struct clk main_clk = {
+ .name = "main",
+ .pmc_mask = AT91_PMC_MOSCS, /* in PMC_SR */
+ .id = 1,
+ .type = CLK_TYPE_PRIMARY,
+};
+static struct clk plla = {
+ .name = "plla",
+ .parent = &main_clk,
+ .pmc_mask = AT91_PMC_LOCKA, /* in PMC_SR */
+ .id = 2,
+ .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
+};
+
+static void pllb_mode(struct clk *clk, int is_on)
+{
+ u32 value;
+
+ if (is_on) {
+ is_on = AT91_PMC_LOCKB;
+ value = at91_pllb_usb_init;
+ } else
+ value = 0;
+
+ // REVISIT: Add work-around for AT91RM9200 Errata #26 ?
+ at91_sys_write(AT91_CKGR_PLLBR, value);
+
+ do {
+ cpu_relax();
+ } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
+}
+
+static struct clk pllb = {
+ .name = "pllb",
+ .parent = &main_clk,
+ .pmc_mask = AT91_PMC_LOCKB, /* in PMC_SR */
+ .mode = pllb_mode,
+ .id = 3,
+ .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
+};
+
+static void pmc_sys_mode(struct clk *clk, int is_on)
+{
+ if (is_on)
+ at91_sys_write(AT91_PMC_SCER, clk->pmc_mask);
+ else
+ at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
+}
+
+/* USB function clocks (PLLB must be 48 MHz) */
+static struct clk udpck = {
+ .name = "udpck",
+ .parent = &pllb,
+ .mode = pmc_sys_mode,
+};
+static struct clk uhpck = {
+ .name = "uhpck",
+ .parent = &pllb,
+ .mode = pmc_sys_mode,
+};
+
+
+/*
+ * The master clock is divided from the CPU clock (by 1-4). It's used for
+ * memory, interfaces to on-chip peripherals, the AIC, and sometimes more
+ * (e.g baud rate generation). It's sourced from one of the primary clocks.
+ */
+static struct clk mck = {
+ .name = "mck",
+ .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */
+};
+
+static void pmc_periph_mode(struct clk *clk, int is_on)
+{
+ if (is_on)
+ at91_sys_write(AT91_PMC_PCER, clk->pmc_mask);
+ else
+ at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
+}
+
+static struct clk __init *at91_css_to_clk(unsigned long css)
+{
+ switch (css) {
+ case AT91_PMC_CSS_SLOW:
+ return &clk32k;
+ case AT91_PMC_CSS_MAIN:
+ return &main_clk;
+ case AT91_PMC_CSS_PLLA:
+ return &plla;
+ case AT91_PMC_CSS_PLLB:
+ return &pllb;
+ }
+
+ return NULL;
+}
+
+/*
+ * Associate a particular clock with a function (eg, "uart") and device.
+ * The drivers can then request the same 'function' with several different
+ * devices and not care about which clock name to use.
+ */
+void __init at91_clock_associate(const char *id, struct device *dev, const char *func)
+{
+ struct clk *clk = clk_get(NULL, id);
+
+ if (!dev || !clk || !IS_ERR(clk_get(dev, func)))
+ return;
+
+ clk->function = func;
+ clk->dev = dev;
+}
+
+/* clocks cannot be de-registered no refcounting necessary */
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *clk;
+
+ list_for_each_entry(clk, &clocks, node) {
+ if (strcmp(id, clk->name) == 0)
+ return clk;
+ if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0)
+ return clk;
+ }
+
+ return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+static void __clk_enable(struct clk *clk)
+{
+ if (clk->parent)
+ __clk_enable(clk->parent);
+ if (clk->users++ == 0 && clk->mode)
+ clk->mode(clk, 1);
+}
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+ BUG_ON(clk->users == 0);
+ if (--clk->users == 0 && clk->mode)
+ clk->mode(clk, 0);
+ if (clk->parent)
+ __clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long flags;
+ unsigned long rate;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ for (;;) {
+ rate = clk->rate_hz;
+ if (rate || !clk->parent)
+ break;
+ clk = clk->parent;
+ }
+ spin_unlock_irqrestore(&clk_lock, flags);
+ return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*------------------------------------------------------------------------*/
+
+#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+
+/*
+ * For now, only the programmable clocks support reparenting (MCK could
+ * do this too, with care) or rate changing (the PLLs could do this too,
+ * ditto MCK but that's more for cpufreq). Drivers may reparent to get
+ * a better rate match; we don't.
+ */
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ unsigned prescale;
+ unsigned long actual;
+
+ if (!clk_is_programmable(clk))
+ return -EINVAL;
+ spin_lock_irqsave(&clk_lock, flags);
+
+ actual = clk->parent->rate_hz;
+ for (prescale = 0; prescale < 7; prescale++) {
+ if (actual && actual <= rate)
+ break;
+ actual >>= 1;
+ }
+
+ spin_unlock_irqrestore(&clk_lock, flags);
+ return (prescale < 7) ? actual : -ENOENT;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ unsigned prescale;
+ unsigned long actual;
+
+ if (!clk_is_programmable(clk))
+ return -EINVAL;
+ if (clk->users)
+ return -EBUSY;
+ spin_lock_irqsave(&clk_lock, flags);
+
+ actual = clk->parent->rate_hz;
+ for (prescale = 0; prescale < 7; prescale++) {
+ if (actual && actual <= rate) {
+ u32 pckr;
+
+ pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
+ pckr &= AT91_PMC_CSS_PLLB; /* clock selection */
+ pckr |= prescale << 2;
+ at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
+ clk->rate_hz = actual;
+ break;
+ }
+ actual >>= 1;
+ }
+
+ spin_unlock_irqrestore(&clk_lock, flags);
+ return (prescale < 7) ? actual : -ENOENT;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+
+ if (clk->users)
+ return -EBUSY;
+ if (!clk_is_primary(parent) || !clk_is_programmable(clk))
+ return -EINVAL;
+ spin_lock_irqsave(&clk_lock, flags);
+
+ clk->rate_hz = parent->rate_hz;
+ clk->parent = parent;
+ at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id);
+
+ spin_unlock_irqrestore(&clk_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/* establish PCK0..PCK3 parentage and rate */
+static void init_programmable_clock(struct clk *clk)
+{
+ struct clk *parent;
+ u32 pckr;
+
+ pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
+ parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
+ clk->parent = parent;
+ clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
+}
+
+#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
+
+/*------------------------------------------------------------------------*/
+
+#ifdef CONFIG_DEBUG_FS
+
+static int at91_clk_show(struct seq_file *s, void *unused)
+{
+ u32 scsr, pcsr, sr;
+ struct clk *clk;
+ unsigned i;
+
+ seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
+ seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR));
+
+ seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
+ seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
+ seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
+ seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
+
+ seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+ for (i = 0; i < 4; i++)
+ seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
+ seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
+
+ seq_printf(s, "\n");
+
+ list_for_each_entry(clk, &clocks, node) {
+ char *state;
+
+ if (clk->mode == pmc_sys_mode)
+ state = (scsr & clk->pmc_mask) ? "on" : "off";
+ else if (clk->mode == pmc_periph_mode)
+ state = (pcsr & clk->pmc_mask) ? "on" : "off";
+ else if (clk->pmc_mask)
+ state = (sr & clk->pmc_mask) ? "on" : "off";
+ else if (clk == &clk32k || clk == &main_clk)
+ state = "on";
+ else
+ state = "";
+
+ seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
+ clk->name, clk->users, state, clk_get_rate(clk),
+ clk->parent ? clk->parent->name : "");
+ }
+ return 0;
+}
+
+static int at91_clk_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, at91_clk_show, NULL);
+}
+
+static struct file_operations at91_clk_operations = {
+ .open = at91_clk_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init at91_clk_debugfs_init(void)
+{
+ /* /sys/kernel/debug/at91_clk */
+ (void) debugfs_create_file("at91_clk", S_IFREG | S_IRUGO, NULL, NULL, &at91_clk_operations);
+
+ return 0;
+}
+postcore_initcall(at91_clk_debugfs_init);
+
+#endif
+
+/*------------------------------------------------------------------------*/
+
+/* Register a new clock */
+int __init clk_register(struct clk *clk)
+{
+ if (clk_is_peripheral(clk)) {
+ clk->parent = &mck;
+ clk->mode = pmc_periph_mode;
+ list_add_tail(&clk->node, &clocks);
+ }
+ else if (clk_is_sys(clk)) {
+ clk->parent = &mck;
+ clk->mode = pmc_sys_mode;
+
+ list_add_tail(&clk->node, &clocks);
+ }
+#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+ else if (clk_is_programmable(clk)) {
+ clk->mode = pmc_sys_mode;
+ init_programmable_clock(clk);
+ list_add_tail(&clk->node, &clocks);
+ }
+#endif
+
+ return 0;
+}
+
+
+/*------------------------------------------------------------------------*/
+
+static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
+{
+ unsigned mul, div;
+
+ div = reg & 0xff;
+ mul = (reg >> 16) & 0x7ff;
+ if (div && mul) {
+ freq /= div;
+ freq *= mul + 1;
+ } else
+ freq = 0;
+
+ return freq;
+}
+
+static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg)
+{
+ if (pll == &pllb && (reg & AT91_PMC_USB96M))
+ return freq / 2;
+ else
+ return freq;
+}
+
+static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
+{
+ unsigned i, div = 0, mul = 0, diff = 1 << 30;
+ unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
+
+ /* PLL output max 240 MHz (or 180 MHz per errata) */
+ if (out_freq > 240000000)
+ goto fail;
+
+ for (i = 1; i < 256; i++) {
+ int diff1;
+ unsigned input, mul1;
+
+ /*
+ * PLL input between 1MHz and 32MHz per spec, but lower
+ * frequences seem necessary in some cases so allow 100K.
+ */
+ input = main_freq / i;
+ if (input < 100000)
+ continue;
+ if (input > 32000000)
+ continue;
+
+ mul1 = out_freq / input;
+ if (mul1 > 2048)
+ continue;
+ if (mul1 < 2)
+ goto fail;
+
+ diff1 = out_freq - input * mul1;
+ if (diff1 < 0)
+ diff1 = -diff1;
+ if (diff > diff1) {
+ diff = diff1;
+ div = i;
+ mul = mul1;
+ if (diff == 0)
+ break;
+ }
+ }
+ if (i == 256 && diff > (out_freq >> 5))
+ goto fail;
+ return ret | ((mul - 1) << 16) | div;
+fail:
+ return 0;
+}
+
+/*
+ * Several unused clocks may be active. Turn them off.
+ */
+static void __init at91_periphclk_reset(void)
+{
+ unsigned long reg;
+ struct clk *clk;
+
+ reg = at91_sys_read(AT91_PMC_PCSR);
+
+ list_for_each_entry(clk, &clocks, node) {
+ if (clk->mode != pmc_periph_mode)
+ continue;
+
+ if (clk->users > 0)
+ reg &= ~clk->pmc_mask;
+ }
+
+ at91_sys_write(AT91_PMC_PCDR, reg);
+}
+
+static struct clk *const standard_pmc_clocks[] __initdata = {
+ /* four primary clocks */
+ &clk32k,
+ &main_clk,
+ &plla,
+ &pllb,
+
+ /* PLLB children (USB) */
+ &udpck,
+ &uhpck,
+
+ /* MCK */
+ &mck
+};
+
+int __init at91_clock_init(unsigned long main_clock)
+{
+ unsigned tmp, freq, mckr;
+ int i;
+
+ /*
+ * When the bootloader initialized the main oscillator correctly,
+ * there's no problem using the cycle counter. But if it didn't,
+ * or when using oscillator bypass mode, we must be told the speed
+ * of the main clock.
+ */
+ if (!main_clock) {
+ do {
+ tmp = at91_sys_read(AT91_CKGR_MCFR);
+ } while (!(tmp & AT91_PMC_MAINRDY));
+ main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
+ }
+ main_clk.rate_hz = main_clock;
+
+ /* report if PLLA is more than mildly overclocked */
+ plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
+ if (plla.rate_hz > 209000000)
+ pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
+
+ /*
+ * USB clock init: choose 48 MHz PLLB value, turn all clocks off,
+ * disable 48MHz clock during usb peripheral suspend.
+ *
+ * REVISIT: assumes MCK doesn't derive from PLLB!
+ */
+ at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+ pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+ if (cpu_is_at91rm9200()) {
+ uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+ udpck.pmc_mask = AT91RM9200_PMC_UDP;
+ at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
+ at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+ } else if (cpu_is_at91sam9260()) {
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
+ } else if (cpu_is_at91sam9261()) {
+ uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
+ udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
+ }
+ at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+ udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+ uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+
+ /*
+ * MCK and CPU derive from one of those primary clocks.
+ * For now, assume this parentage won't change.
+ */
+ mckr = at91_sys_read(AT91_PMC_MCKR);
+ mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
+ freq = mck.parent->rate_hz;
+ freq /= (1 << ((mckr >> 2) & 3)); /* prescale */
+ mck.rate_hz = freq / (1 + ((mckr >> 8) & 3)); /* mdiv */
+
+ /* Register the PMC's standard clocks */
+ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
+ list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
+
+ /* MCK and CPU clock are "always on" */
+ clk_enable(&mck);
+
+ printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n",
+ freq / 1000000, (unsigned) mck.rate_hz / 1000000,
+ (unsigned) main_clock / 1000000,
+ ((unsigned) main_clock % 1000000) / 1000);
+
+ /* disable all programmable clocks */
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
+
+ /* disable all other unused peripheral clocks */
+ at91_periphclk_reset();
+
+ return 0;
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define CLK_TYPE_PRIMARY 0x1
+#define CLK_TYPE_PLL 0x2
+#define CLK_TYPE_PROGRAMMABLE 0x4
+#define CLK_TYPE_PERIPHERAL 0x8
+#define CLK_TYPE_SYSTEM 0x10
+
+
+struct clk {
+ struct list_head node;
+ const char *name; /* unique clock name */
+ const char *function; /* function of the clock */
+ struct device *dev; /* device associated with function */
+ unsigned long rate_hz;
+ struct clk *parent;
+ u32 pmc_mask;
+ void (*mode)(struct clk *, int);
+ unsigned id:2; /* PCK0..3, or 32k/main/a/b */
+ unsigned type; /* clock type */
+ u16 users;
+};
+
+
+extern int __init clk_register(struct clk *clk);
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/generic.h
+ *
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ /* Processors */
+extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
+extern void __init at91sam9260_initialize(unsigned long main_clock);
+extern void __init at91sam9261_initialize(unsigned long main_clock);
+
+ /* Interrupts */
+extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
+extern void __init at91_aic_init(unsigned int priority[]);
+
+ /* Timer */
+struct sys_timer;
+extern struct sys_timer at91rm9200_timer;
+extern struct sys_timer at91sam926x_timer;
+
+ /* Clocks */
+extern int __init at91_clock_init(unsigned long main_clock);
+struct device;
+extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func);
+
+ /* Power Management */
+extern void at91_irq_suspend(void);
+extern void at91_irq_resume(void);
+
+ /* GPIO */
+#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
+#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
+
+struct at91_gpio_bank {
+ unsigned short id; /* peripheral ID */
+ unsigned long offset; /* offset from system peripheral base */
+ struct clk *clock; /* associated clock */
+};
+extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
+extern void __init at91_gpio_irq_setup(void);
+
+extern void (*at91_arch_reset)(void);
+extern int at91_extern_irq;
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/gpio.c
+ *
+ * Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+static struct at91_gpio_bank *gpio;
+static int gpio_banks;
+
+
+static inline void __iomem *pin_to_controller(unsigned pin)
+{
+ void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
+
+ pin -= PIN_BASE;
+ pin /= 32;
+ if (likely(pin < gpio_banks))
+ return sys_base + gpio[pin].offset;
+
+ return NULL;
+}
+
+static inline unsigned pin_to_mask(unsigned pin)
+{
+ pin -= PIN_BASE;
+ return 1 << (pin % 32);
+}
+
+
+/*--------------------------------------------------------------------------*/
+
+/* Not all hardware capabilities are exposed through these calls; they
+ * only encapsulate the most common features and modes. (So if you
+ * want to change signals in groups, do it directly.)
+ *
+ * Bootloaders will usually handle some of the pin multiplexing setup.
+ * The intent is certainly that by the time Linux is fully booted, all
+ * pins should have been fully initialized. These setup calls should
+ * only be used by board setup routines, or possibly in driver probe().
+ *
+ * For bootloaders doing all that setup, these calls could be inlined
+ * as NOPs so Linux won't duplicate any setup code
+ */
+
+
+/*
+ * mux the pin to the "A" internal peripheral role.
+ */
+int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+
+ __raw_writel(mask, pio + PIO_IDR);
+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+ __raw_writel(mask, pio + PIO_ASR);
+ __raw_writel(mask, pio + PIO_PDR);
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_A_periph);
+
+
+/*
+ * mux the pin to the "B" internal peripheral role.
+ */
+int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+
+ __raw_writel(mask, pio + PIO_IDR);
+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+ __raw_writel(mask, pio + PIO_BSR);
+ __raw_writel(mask, pio + PIO_PDR);
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_B_periph);
+
+
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
+ * configure it for an input.
+ */
+int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+
+ __raw_writel(mask, pio + PIO_IDR);
+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+ __raw_writel(mask, pio + PIO_ODR);
+ __raw_writel(mask, pio + PIO_PER);
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_gpio_input);
+
+
+/*
+ * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
+ * and configure it for an output.
+ */
+int __init_or_module at91_set_gpio_output(unsigned pin, int value)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+
+ __raw_writel(mask, pio + PIO_IDR);
+ __raw_writel(mask, pio + PIO_PUDR);
+ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+ __raw_writel(mask, pio + PIO_OER);
+ __raw_writel(mask, pio + PIO_PER);
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_gpio_output);
+
+
+/*
+ * enable/disable the glitch filter; mostly used with IRQ handling.
+ */
+int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+ __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_deglitch);
+
+/*
+ * enable/disable the multi-driver; This is only valid for output and
+ * allows the output pin to run as an open collector output.
+ */
+int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+
+ __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_multi_drive);
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * assuming the pin is muxed as a gpio output, set its value.
+ */
+int at91_set_gpio_value(unsigned pin, int value)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio)
+ return -EINVAL;
+ __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_gpio_value);
+
+
+/*
+ * read the pin's value (works even if it's not muxed as a gpio).
+ */
+int at91_get_gpio_value(unsigned pin)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+ u32 pdsr;
+
+ if (!pio)
+ return -EINVAL;
+ pdsr = __raw_readl(pio + PIO_PDSR);
+ return (pdsr & mask) != 0;
+}
+EXPORT_SYMBOL(at91_get_gpio_value);
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+
+static u32 wakeups[MAX_GPIO_BANKS];
+static u32 backups[MAX_GPIO_BANKS];
+
+static int gpio_irq_set_wake(unsigned pin, unsigned state)
+{
+ unsigned mask = pin_to_mask(pin);
+ unsigned bank = (pin - PIN_BASE) / 32;
+
+ if (unlikely(bank >= MAX_GPIO_BANKS))
+ return -EINVAL;
+
+ if (state)
+ wakeups[bank] |= mask;
+ else
+ wakeups[bank] &= ~mask;
+
+ set_irq_wake(gpio[bank].id, state);
+
+ return 0;
+}
+
+void at91_gpio_suspend(void)
+{
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+ u32 pio = gpio[i].offset;
+
+ backups[i] = at91_sys_read(pio + PIO_IMR);
+ at91_sys_write(pio + PIO_IDR, backups[i]);
+ at91_sys_write(pio + PIO_IER, wakeups[i]);
+
+ if (!wakeups[i])
+ clk_disable(gpio[i].clock);
+ else {
+#ifdef CONFIG_PM_DEBUG
+ printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
+#endif
+ }
+ }
+}
+
+void at91_gpio_resume(void)
+{
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+ u32 pio = gpio[i].offset;
+
+ if (!wakeups[i])
+ clk_enable(gpio[i].clock);
+
+ at91_sys_write(pio + PIO_IDR, wakeups[i]);
+ at91_sys_write(pio + PIO_IER, backups[i]);
+ }
+}
+
+#else
+#define gpio_irq_set_wake NULL
+#endif
+
+
+/* Several AIC controller irqs are dispatched through this GPIO handler.
+ * To use any AT91_PIN_* as an externally triggered IRQ, first call
+ * at91_set_gpio_input() then maybe enable its glitch filter.
+ * Then just request_irq() with the pin ID; it works like any ARM IRQ
+ * handler, though it always triggers on rising and falling edges.
+ *
+ * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
+ * configuring them with at91_set_a_periph() or at91_set_b_periph().
+ * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
+ */
+
+static void gpio_irq_mask(unsigned pin)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (pio)
+ __raw_writel(mask, pio + PIO_IDR);
+}
+
+static void gpio_irq_unmask(unsigned pin)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (pio)
+ __raw_writel(mask, pio + PIO_IER);
+}
+
+static int gpio_irq_type(unsigned pin, unsigned type)
+{
+ return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
+}
+
+static struct irq_chip gpio_irqchip = {
+ .name = "GPIO",
+ .mask = gpio_irq_mask,
+ .unmask = gpio_irq_unmask,
+ .set_type = gpio_irq_type,
+ .set_wake = gpio_irq_set_wake,
+};
+
+static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+ unsigned pin;
+ struct irq_desc *gpio;
+ void __iomem *pio;
+ u32 isr;
+
+ pio = get_irq_chip_data(irq);
+
+ /* temporarily mask (level sensitive) parent IRQ */
+ desc->chip->ack(irq);
+ for (;;) {
+ /* reading ISR acks the pending (edge triggered) GPIO interrupt */
+ isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
+ if (!isr)
+ break;
+
+ pin = (unsigned) get_irq_data(irq);
+ gpio = &irq_desc[pin];
+
+ while (isr) {
+ if (isr & 1) {
+ if (unlikely(gpio->depth)) {
+ /*
+ * The core ARM interrupt handler lazily disables IRQs so
+ * another IRQ must be generated before it actually gets
+ * here to be disabled on the GPIO controller.
+ */
+ gpio_irq_mask(pin);
+ }
+ else
+ desc_handle_irq(pin, gpio);
+ }
+ pin++;
+ gpio++;
+ isr >>= 1;
+ }
+ }
+ desc->chip->unmask(irq);
+ /* now it may re-trigger */
+}
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * Called from the processor-specific init to enable GPIO interrupt support.
+ */
+void __init at91_gpio_irq_setup(void)
+{
+ unsigned pioc, pin;
+
+ for (pioc = 0, pin = PIN_BASE;
+ pioc < gpio_banks;
+ pioc++) {
+ void __iomem *controller;
+ unsigned id = gpio[pioc].id;
+ unsigned i;
+
+ clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */
+
+ controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
+ __raw_writel(~0, controller + PIO_IDR);
+
+ set_irq_data(id, (void *) pin);
+ set_irq_chip_data(id, controller);
+
+ for (i = 0; i < 32; i++, pin++) {
+ /*
+ * Can use the "simple" and not "edge" handler since it's
+ * shorter, and the AIC handles interupts sanely.
+ */
+ set_irq_chip(pin, &gpio_irqchip);
+ set_irq_handler(pin, handle_simple_irq);
+ set_irq_flags(pin, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(id, gpio_irq_handler);
+ }
+ pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
+}
+
+/*
+ * Called from the processor-specific init to enable GPIO pin support.
+ */
+void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
+{
+ BUG_ON(nr_banks > MAX_GPIO_BANKS);
+
+ gpio = data;
+ gpio_banks = nr_banks;
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/irq.c
+ *
+ * Copyright (C) 2004 SAN People
+ * Copyright (C) 2004 ATMEL
+ * Copyright (C) Rick Bronson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+
+static void at91_aic_mask_irq(unsigned int irq)
+{
+ /* Disable interrupt on AIC */
+ at91_sys_write(AT91_AIC_IDCR, 1 << irq);
+}
+
+static void at91_aic_unmask_irq(unsigned int irq)
+{
+ /* Enable interrupt on AIC */
+ at91_sys_write(AT91_AIC_IECR, 1 << irq);
+}
+
+unsigned int at91_extern_irq;
+
+#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq)
+
+static int at91_aic_set_type(unsigned irq, unsigned type)
+{
+ unsigned int smr, srctype;
+
+ switch (type) {
+ case IRQT_HIGH:
+ srctype = AT91_AIC_SRCTYPE_HIGH;
+ break;
+ case IRQT_RISING:
+ srctype = AT91_AIC_SRCTYPE_RISING;
+ break;
+ case IRQT_LOW:
+ if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */
+ srctype = AT91_AIC_SRCTYPE_LOW;
+ else
+ return -EINVAL;
+ break;
+ case IRQT_FALLING:
+ if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */
+ srctype = AT91_AIC_SRCTYPE_FALLING;
+ else
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ smr = at91_sys_read(AT91_AIC_SMR(irq)) & ~AT91_AIC_SRCTYPE;
+ at91_sys_write(AT91_AIC_SMR(irq), smr | srctype);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static u32 wakeups;
+static u32 backups;
+
+static int at91_aic_set_wake(unsigned irq, unsigned value)
+{
+ if (unlikely(irq >= 32))
+ return -EINVAL;
+
+ if (value)
+ wakeups |= (1 << irq);
+ else
+ wakeups &= ~(1 << irq);
+
+ return 0;
+}
+
+void at91_irq_suspend(void)
+{
+ backups = at91_sys_read(AT91_AIC_IMR);
+ at91_sys_write(AT91_AIC_IDCR, backups);
+ at91_sys_write(AT91_AIC_IECR, wakeups);
+}
+
+void at91_irq_resume(void)
+{
+ at91_sys_write(AT91_AIC_IDCR, wakeups);
+ at91_sys_write(AT91_AIC_IECR, backups);
+}
+
+#else
+#define at91_aic_set_wake NULL
+#endif
+
+static struct irq_chip at91_aic_chip = {
+ .name = "AIC",
+ .ack = at91_aic_mask_irq,
+ .mask = at91_aic_mask_irq,
+ .unmask = at91_aic_unmask_irq,
+ .set_type = at91_aic_set_type,
+ .set_wake = at91_aic_set_wake,
+};
+
+/*
+ * Initialize the AIC interrupt controller.
+ */
+void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
+{
+ unsigned int i;
+
+ /*
+ * The IVR is used by macro get_irqnr_and_base to read and verify.
+ * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
+ */
+ for (i = 0; i < NR_AIC_IRQS; i++) {
+ /* Put irq number in Source Vector Register: */
+ at91_sys_write(AT91_AIC_SVR(i), i);
+ /* Active Low interrupt, with the specified priority */
+ at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
+
+ set_irq_chip(i, &at91_aic_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+
+ /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
+ if (i < 8)
+ at91_sys_write(AT91_AIC_EOICR, 0);
+ }
+
+ /*
+ * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
+ * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
+ */
+ at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
+
+ /* No debugging in AIC: Debug (Protect) Control Register */
+ at91_sys_write(AT91_AIC_DCR, 0);
+
+ /* Disable and clear all interrupts initially */
+ at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
+ at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
+}
--- /dev/null
+/*
+ * LED driver for Atmel AT91-based boards.
+ *
+ * Copyright (C) SAN People (Pty) Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/mach-types.h>
+#include <asm/leds.h>
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+
+static inline void at91_led_on(unsigned int led)
+{
+ at91_set_gpio_value(led, 0);
+}
+
+static inline void at91_led_off(unsigned int led)
+{
+ at91_set_gpio_value(led, 1);
+}
+
+static inline void at91_led_toggle(unsigned int led)
+{
+ unsigned long is_off = at91_get_gpio_value(led);
+ if (is_off)
+ at91_led_on(led);
+ else
+ at91_led_off(led);
+}
+
+
+/*
+ * Handle LED events.
+ */
+static void at91_leds_event(led_event_t evt)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ switch(evt) {
+ case led_start: /* System startup */
+ at91_led_on(at91_leds_cpu);
+ break;
+
+ case led_stop: /* System stop / suspend */
+ at91_led_off(at91_leds_cpu);
+ break;
+
+#ifdef CONFIG_LEDS_TIMER
+ case led_timer: /* Every 50 timer ticks */
+ at91_led_toggle(at91_leds_timer);
+ break;
+#endif
+
+#ifdef CONFIG_LEDS_CPU
+ case led_idle_start: /* Entering idle state */
+ at91_led_off(at91_leds_cpu);
+ break;
+
+ case led_idle_end: /* Exit idle state */
+ at91_led_on(at91_leds_cpu);
+ break;
+#endif
+
+ default:
+ break;
+ }
+
+ local_irq_restore(flags);
+}
+
+
+static int __init leds_init(void)
+{
+ if (!at91_leds_timer || !at91_leds_cpu)
+ return -ENODEV;
+
+ /* Enable PIO to access the LEDs */
+ at91_set_gpio_output(at91_leds_timer, 1);
+ at91_set_gpio_output(at91_leds_cpu, 1);
+
+ leds_event = at91_leds_event;
+
+ leds_event(led_start);
+ return 0;
+}
+
+__initcall(leds_init);
--- /dev/null
+/*
+ * arch/arm/mach-at91/pm.c
+ * AT91 Power Management
+ *
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91rm9200_mc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/cpu.h>
+
+#include "generic.h"
+
+
+static int at91_pm_valid_state(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_ON:
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+
+static suspend_state_t target_state;
+
+/*
+ * Called after processes are frozen, but before we shutdown devices.
+ */
+static int at91_pm_prepare(suspend_state_t state)
+{
+ target_state = state;
+ return 0;
+}
+
+/*
+ * Verify that all the clocks are correct before entering
+ * slow-clock mode.
+ */
+static int at91_pm_verify_clocks(void)
+{
+ unsigned long scsr;
+ int i;
+
+ scsr = at91_sys_read(AT91_PMC_SCSR);
+
+ /* USB must not be using PLLB */
+ if (cpu_is_at91rm9200()) {
+ if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
+ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+ return 0;
+ }
+ } else if (cpu_is_at91sam9260()) {
+#warning "Check SAM9260 USB clocks"
+ } else if (cpu_is_at91sam9261()) {
+#warning "Check SAM9261 USB clocks"
+ }
+
+#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+ /* PCK0..PCK3 must be disabled, or configured to use clk32k */
+ for (i = 0; i < 4; i++) {
+ u32 css;
+
+ if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
+ continue;
+
+ css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+ if (css != AT91_PMC_CSS_SLOW) {
+ pr_debug("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
+ return 0;
+ }
+ }
+#endif
+
+ return 1;
+}
+
+/*
+ * Call this from platform driver suspend() to see how deeply to suspend.
+ * For example, some controllers (like OHCI) need one of the PLL clocks
+ * in order to act as a wakeup source, and those are not available when
+ * going into slow clock mode.
+ *
+ * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
+ * the very same problem (but not using at91 main_clk), and it'd be better
+ * to add one generic API rather than lots of platform-specific ones.
+ */
+int at91_suspend_entering_slow_clock(void)
+{
+ return (target_state == PM_SUSPEND_MEM);
+}
+EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
+
+
+static void (*slow_clock)(void);
+
+
+static int at91_pm_enter(suspend_state_t state)
+{
+ at91_gpio_suspend();
+ at91_irq_suspend();
+
+ pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
+ /* remember all the always-wake irqs */
+ (at91_sys_read(AT91_PMC_PCSR)
+ | (1 << AT91_ID_FIQ)
+ | (1 << AT91_ID_SYS)
+ | (at91_extern_irq))
+ & at91_sys_read(AT91_AIC_IMR),
+ state);
+
+ switch (state) {
+ /*
+ * Suspend-to-RAM is like STANDBY plus slow clock mode, so
+ * drivers must suspend more deeply: only the master clock
+ * controller may be using the main oscillator.
+ */
+ case PM_SUSPEND_MEM:
+ /*
+ * Ensure that clocks are in a valid state.
+ */
+ if (!at91_pm_verify_clocks())
+ goto error;
+
+ /*
+ * Enter slow clock mode by switching over to clk32k and
+ * turning off the main oscillator; reverse on wakeup.
+ */
+ if (slow_clock) {
+ slow_clock();
+ break;
+ } else {
+ /* DEVELOPMENT ONLY */
+ pr_info("AT91: PM - no slow clock mode yet ...\n");
+ /* FALLTHROUGH leaving master clock alone */
+ }
+
+ /*
+ * STANDBY mode has *all* drivers suspended; ignores irqs not
+ * marked as 'wakeup' event sources; and reduces DRAM power.
+ * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
+ * nothing fancy done with main or cpu clocks.
+ */
+ case PM_SUSPEND_STANDBY:
+ /*
+ * NOTE: the Wait-for-Interrupt instruction needs to be
+ * in icache so the SDRAM stays in self-refresh mode until
+ * the wakeup IRQ occurs.
+ */
+ asm("b 1f; .align 5; 1:");
+ asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
+ at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */
+ /* fall though to next state */
+
+ case PM_SUSPEND_ON:
+ asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
+ break;
+
+ default:
+ pr_debug("AT91: PM - bogus suspend state %d\n", state);
+ goto error;
+ }
+
+ pr_debug("AT91: PM - wakeup %08x\n",
+ at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
+
+error:
+ target_state = PM_SUSPEND_ON;
+ at91_irq_resume();
+ at91_gpio_resume();
+ return 0;
+}
+
+
+static struct pm_ops at91_pm_ops ={
+ .pm_disk_mode = 0,
+ .valid = at91_pm_valid_state,
+ .prepare = at91_pm_prepare,
+ .enter = at91_pm_enter,
+};
+
+static int __init at91_pm_init(void)
+{
+ printk("AT91: Power Management\n");
+
+#ifdef CONFIG_AT91_PM_SLOW_CLOCK
+ /* REVISIT allocations of SRAM should be dynamically managed.
+ * FIQ handlers and other components will want SRAM/TCM too...
+ */
+ slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
+ memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
+#endif
+
+ /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
+ at91_sys_write(AT91_SDRAMC_LPR, 0);
+
+ pm_set_ops(&at91_pm_ops);
+
+ return 0;
+}
+arch_initcall(at91_pm_init);
+++ /dev/null
-if ARCH_AT91
-
-menu "Atmel AT91 System-on-Chip"
-
-choice
- prompt "Atmel AT91 Processor"
-
-config ARCH_AT91RM9200
- bool "AT91RM9200"
-
-config ARCH_AT91SAM9260
- bool "AT91SAM9260"
-
-config ARCH_AT91SAM9261
- bool "AT91SAM9261"
-
-endchoice
-
-# ----------------------------------------------------------
-
-if ARCH_AT91RM9200
-
-comment "AT91RM9200 Board Type"
-
-config MACH_ONEARM
- bool "Ajeco 1ARM Single Board Computer"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Ajeco's 1ARM Single Board Computer.
- <http://www.ajeco.fi/products.htm>
-
-config ARCH_AT91RM9200DK
- bool "Atmel AT91RM9200-DK Development board"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Atmel's AT91RM9200-DK Development board.
- (Discontinued)
-
-config MACH_AT91RM9200EK
- bool "Atmel AT91RM9200-EK Evaluation Kit"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
-
-config MACH_CSB337
- bool "Cogent CSB337"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Cogent's CSB337 board.
- <http://www.cogcomp.com/csb_csb337.htm>
-
-config MACH_CSB637
- bool "Cogent CSB637"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Cogent's CSB637 board.
- <http://www.cogcomp.com/csb_csb637.htm>
-
-config MACH_CARMEVA
- bool "Conitec ARM&EVA"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Conitec's AT91RM9200-MCU-Module.
- <http://www.conitec.net/english/linuxboard.htm>
-
-config MACH_ATEB9200
- bool "Embest ATEB9200"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Embest's ATEB9200 board.
- <http://www.embedinfo.com/english/product/ATEB9200.asp>
-
-config MACH_KB9200
- bool "KwikByte KB920x"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using KwikByte's KB920x board.
- <http://kwikbyte.com/KB9202_description_new.htm>
-
-config MACH_KAFA
- bool "Sperry-Sun KAFA board"
- depends on ARCH_AT91RM9200
- help
- Select this if you are using Sperry-Sun's KAFA board.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9260
-
-comment "AT91SAM9260 Board Type"
-
-config MACH_AT91SAM9260EK
- bool "Atmel AT91SAM9260-EK Evaluation Kit"
- depends on ARCH_AT91SAM9260
- help
- Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
- bool "Atmel AT91SAM9261-EK Evaluation Kit"
- depends on ARCH_AT91SAM9261
- help
- Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-comment "AT91 Board Options"
-
-config MTD_AT91_DATAFLASH_CARD
- bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
- help
- Enable support for the DataFlash card.
-
-config MTD_NAND_AT91_BUSWIDTH_16
- bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
- help
- On AT91SAM926x boards both types of NAND flash can be present
- (8 and 16 bit data bus width).
-
-# ----------------------------------------------------------
-
-comment "AT91 Feature Selections"
-
-config AT91_PROGRAMMABLE_CLOCKS
- bool "Programmable Clocks"
- help
- Select this if you need to program one or more of the PCK0..PCK3
- programmable clock outputs.
-
-endmenu
-
-endif
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-obj-y := clock.o irq.o gpio.o
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_PM) += pm.o
-
-# CPU-specific support
-obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
-
-# AT91RM9200 board-specific support
-obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
-obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
-obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
-obj-$(CONFIG_MACH_CSB337) += board-csb337.o
-obj-$(CONFIG_MACH_CSB637) += board-csb637.o
-obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
-obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
-obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
-obj-$(CONFIG_MACH_KAFA) += board-kafa.o
-
-# AT91SAM9260 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-
-# AT91SAM9261 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
-
-# LEDs support
-led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
-led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
-led-$(CONFIG_MACH_CSB337) += leds.o
-led-$(CONFIG_MACH_CSB637) += leds.o
-led-$(CONFIG_MACH_KB9200) += leds.o
-led-$(CONFIG_MACH_KAFA) += leds.o
-obj-$(CONFIG_LEDS) += $(led-y)
-
-# VGA support
-#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
-
-
-ifeq ($(CONFIG_PM_DEBUG),y)
-CFLAGS_pm.o += -DDEBUG
-endif
+++ /dev/null
-# Note: the following conditions must always be true:
-# ZRELADDR == virt_to_phys(TEXTADDR)
-# PARAMS_PHYS must be within 4MB of ZRELADDR
-# INITRD_PHYS must be in RAM
-
- zreladdr-y := 0x20008000
-params_phys-y := 0x20000100
-initrd_phys-y := 0x20410000
-
+++ /dev/null
-/*
- * arch/arm/mach-at91rm9200/at91rm9200.c
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_st.h>
-
-#include "generic.h"
-#include "clock.h"
-
-static struct map_desc at91rm9200_io_desc[] __initdata = {
- {
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_VA_BASE_EMAC,
- .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE,
- .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE),
- .length = AT91RM9200_SRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk udc_clk = {
- .name = "udc_clk",
- .pmc_mask = 1 << AT91RM9200_ID_UDP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91RM9200_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ether_clk = {
- .name = "ether_clk",
- .pmc_mask = 1 << AT91RM9200_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
- .name = "mci_clk",
- .pmc_mask = 1 << AT91RM9200_ID_MCI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91RM9200_ID_TWI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91RM9200_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91RM9200_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91RM9200_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
- .name = "usart3_clk",
- .pmc_mask = 1 << AT91RM9200_ID_US3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi_clk = {
- .name = "spi_clk",
- .pmc_mask = 1 << AT91RM9200_ID_SPI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT91RM9200_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT91RM9200_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pmc_mask = 1 << AT91RM9200_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioD_clk = {
- .name = "pioD_clk",
- .pmc_mask = 1 << AT91RM9200_ID_PIOD,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &pioD_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &usart3_clk,
- &mmc_clk,
- &udc_clk,
- &twi_clk,
- &spi_clk,
- // ssc 0 .. ssc2
- // tc0 .. tc5
- &ohci_clk,
- ðer_clk,
- // irq0 .. irq6
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-static struct clk pck3 = {
- .name = "pck3",
- .pmc_mask = AT91_PMC_PCK3,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 3,
-};
-
-static void __init at91rm9200_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
- clk_register(&pck3);
-}
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91rm9200_gpio[] = {
- {
- .id = AT91RM9200_ID_PIOA,
- .offset = AT91_PIOA,
- .clock = &pioA_clk,
- }, {
- .id = AT91RM9200_ID_PIOB,
- .offset = AT91_PIOB,
- .clock = &pioB_clk,
- }, {
- .id = AT91RM9200_ID_PIOC,
- .offset = AT91_PIOC,
- .clock = &pioC_clk,
- }, {
- .id = AT91RM9200_ID_PIOD,
- .offset = AT91_PIOD,
- .clock = &pioD_clk,
- }
-};
-
-static void at91rm9200_reset(void)
-{
- /*
- * Perform a hardware reset with the use of the Watchdog timer.
- */
- at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
- at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
-}
-
-
-/* --------------------------------------------------------------------
- * AT91RM9200 processor initialization
- * -------------------------------------------------------------------- */
-void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
-{
- /* Map peripherals */
- iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
-
- at91_arch_reset = at91rm9200_reset;
- at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
- | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
- | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
- | (1 << AT91RM9200_ID_IRQ6);
-
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at91rm9200_register_clocks();
-
- /* Initialize GPIO subsystem */
- at91_gpio_init(at91rm9200_gpio, banks);
-}
-
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
- 0, /* Parallel IO Controller D */
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
- 6, /* USART 3 */
- 0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 5, /* Serial Synchronous Controller 2 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 0, /* Timer Counter 3 */
- 0, /* Timer Counter 4 */
- 0, /* Timer Counter 5 */
- 3, /* USB Host port */
- 3, /* Ethernet MAC */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
- 0, /* Advanced Interrupt Controller (IRQ2) */
- 0, /* Advanced Interrupt Controller (IRQ3) */
- 0, /* Advanced Interrupt Controller (IRQ4) */
- 0, /* Advanced Interrupt Controller (IRQ5) */
- 0 /* Advanced Interrupt Controller (IRQ6) */
-};
-
-void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- if (!priority)
- priority = at91rm9200_default_irq_priority;
-
- /* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
+++ /dev/null
-/*
- * arch/arm/mach-at91rm9200/at91rm9200_devices.c
- *
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_device.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91rm9200_mc.h>
-
-#include "generic.h"
-
-#define SZ_512 0x00000200
-#define SZ_256 0x00000100
-#define SZ_16 0x00000010
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT91RM9200_UHP_BASE,
- .end = AT91RM9200_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_UHP,
- .end = AT91RM9200_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- if (!data)
- return;
-
- usbh_data = *data;
- platform_device_register(&at91rm9200_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_USB_GADGET_AT91
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_UDP,
- .end = AT91RM9200_BASE_UDP + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_UDP,
- .end = AT91RM9200_ID_UDP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_udc_device = {
- .name = "at91_udc",
- .id = -1,
- .dev = {
- .platform_data = &udc_data,
- },
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
- if (!data)
- return;
-
- if (data->vbus_pin) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- }
- if (data->pullup_pin)
- at91_set_gpio_output(data->pullup_pin, 0);
-
- udc_data = *data;
- platform_device_register(&at91rm9200_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
-static struct at91_eth_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_EMAC,
- .end = AT91_VA_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_EMAC,
- .end = AT91RM9200_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_eth_device = {
- .name = "at91_ether",
- .id = -1,
- .dev = {
- .dma_mask = ð_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = ð_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct at91_eth_data *data)
-{
- if (!data)
- return;
-
- if (data->phy_irq_pin) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Pins used for MII and RMII */
- at91_set_A_periph(AT91_PIN_PA16, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PA15, 0); /* EMDC */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PA11, 0); /* ECRS_ECRSDV */
- at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PA9, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PA8, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* ETXCK_EREFCK */
-
- if (!data->is_rmii) {
- at91_set_B_periph(AT91_PIN_PB19, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PB18, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PB17, 0); /* ERXDV */
- at91_set_B_periph(AT91_PIN_PB16, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PB15, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PB14, 0); /* ETXER */
- at91_set_B_periph(AT91_PIN_PB13, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PB12, 0); /* ETX2 */
- }
-
- eth_data = *data;
- platform_device_register(&at91rm9200_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Compact Flash / PCMCIA
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
-static struct at91_cf_data cf_data;
-
-#define CF_BASE AT91_CHIPSELECT_4
-
-static struct resource cf_resources[] = {
- [0] = {
- .start = CF_BASE,
- /* ties up CS4, CS5 and CS6 */
- .end = CF_BASE + (0x30000000 - 1),
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
- },
-};
-
-static struct platform_device at91rm9200_cf_device = {
- .name = "at91_cf",
- .id = -1,
- .dev = {
- .platform_data = &cf_data,
- },
- .resource = cf_resources,
- .num_resources = ARRAY_SIZE(cf_resources),
-};
-
-void __init at91_add_device_cf(struct at91_cf_data *data)
-{
- unsigned int csa;
-
- if (!data)
- return;
-
- data->chipselect = 4; /* can only use EBI ChipSelect 4 */
-
- /* CF takes over CS4, CS5, CS6 */
- csa = at91_sys_read(AT91_EBI_CSA);
- at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
-
- /*
- * Static memory controller timing adjustments.
- * REVISIT: these timings are in terms of MCK cycles, so
- * when MCK changes (cpufreq etc) so must these values...
- */
- at91_sys_write(AT91_SMC_CSR(4),
- AT91_SMC_ACSS_STD
- | AT91_SMC_DBW_16
- | AT91_SMC_BAT
- | AT91_SMC_WSEN
- | AT91_SMC_NWS_(32) /* wait states */
- | AT91_SMC_RWSETUP_(6) /* setup time */
- | AT91_SMC_RWHOLD_(4) /* hold time */
- );
-
- /* input/irq */
- if (data->irq_pin) {
- at91_set_gpio_input(data->irq_pin, 1);
- at91_set_deglitch(data->irq_pin, 1);
- }
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
-
- /* outputs, initially off */
- if (data->vcc_pin)
- at91_set_gpio_output(data->vcc_pin, 0);
- at91_set_gpio_output(data->rst_pin, 0);
-
- /* force poweron defaults for these pins ... */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* A25/CFRNW */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* NCS4/CFCS */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* NCS5/CFCE1 */
- at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */
-
- /* nWAIT is _not_ a default setting */
- at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */
-
- cf_data = *data;
- platform_device_register(&at91rm9200_cf_device);
-}
-#else
-void __init at91_add_device_cf(struct at91_cf_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_MCI,
- .end = AT91RM9200_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_MCI,
- .end = AT91RM9200_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_mmc_device = {
- .name = "at91_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
-{
- if (!data)
- return;
-
- /* input/irq */
- if (data->det_pin) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (data->wp_pin)
- at91_set_gpio_input(data->wp_pin, 1);
- if (data->vcc_pin)
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA27, 0);
-
- if (data->slot_b) {
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA8, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA9, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PA10, 1);
- at91_set_B_periph(AT91_PIN_PA11, 1);
- at91_set_B_periph(AT91_PIN_PA12, 1);
- }
- } else {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA28, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA29, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PB3, 1);
- at91_set_B_periph(AT91_PIN_PB4, 1);
- at91_set_B_periph(AT91_PIN_PB5, 1);
- }
- }
-
- mmc_data = *data;
- platform_device_register(&at91rm9200_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91rm9200_nand_device = {
- .name = "at91_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct at91_nand_data *data)
-{
- unsigned int csa;
-
- if (!data)
- return;
-
- /* enable the address range of CS3 */
- csa = at91_sys_read(AT91_EBI_CSA);
- at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
-
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
- | AT91_SMC_NWS_(5)
- | AT91_SMC_TDF_(1)
- | AT91_SMC_RWSETUP_(0) /* tDS Data Set up Time 30 - ns */
- | AT91_SMC_RWHOLD_(1) /* tDH Data Hold Time 20 - ns */
- );
-
- /* enable pin */
- if (data->enable_pin)
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (data->rdy_pin)
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (data->det_pin)
- at91_set_gpio_input(data->det_pin, 1);
-
- at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* SMWE */
-
- nand_data = *data;
- platform_device_register(&at91rm9200_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_TWI,
- .end = AT91RM9200_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_TWI,
- .end = AT91RM9200_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_twi_device = {
- .name = "at91_i2c",
- .id = -1,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(void)
-{
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA25, 1);
-
- at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA26, 1);
-
- platform_device_register(&at91rm9200_twi_device);
-}
-#else
-void __init at91_add_device_i2c(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
-
-static struct resource spi_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_SPI,
- .end = AT91RM9200_BASE_SPI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_SPI,
- .end = AT91RM9200_ID_SPI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_spi_device = {
- .name = "at91_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = spi_resources,
- .num_resources = ARRAY_SIZE(spi_resources),
-};
-
-static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
-
- at91_set_A_periph(AT91_PIN_PA0, 0); /* MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPCK */
-
- /* Enable SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else
- cs_pin = spi_standard_cs[devices[i].chip_select];
-
-#ifdef CONFIG_SPI_AT91_MANUAL_CS
- at91_set_gpio_output(cs_pin, 1);
-#else
- at91_set_A_periph(cs_pin, 0);
-#endif
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
- at91_clock_associate("spi_clk", &at91rm9200_spi_device.dev, "spi");
- platform_device_register(&at91rm9200_spi_device);
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTC
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
-static struct platform_device at91rm9200_rtc_device = {
- .name = "at91_rtc",
- .id = -1,
- .num_resources = 0,
-};
-
-static void __init at91_add_device_rtc(void)
-{
- platform_device_register(&at91rm9200_rtc_device);
-}
-#else
-static void __init at91_add_device_rtc(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE)
-static struct platform_device at91rm9200_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .num_resources = 0,
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at91rm9200_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
-}
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static struct platform_device at91rm9200_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PA30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PA31, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US0,
- .end = AT91RM9200_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_US0,
- .end = AT91RM9200_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91rm9200_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
-
- /*
- * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
- * We need to drive the pin manually. Default is off (RTS is active low).
- */
- at91_set_gpio_output(AT91_PIN_PA21, 1);
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US1,
- .end = AT91RM9200_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_US1,
- .end = AT91RM9200_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91rm9200_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
- at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
- at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US2,
- .end = AT91RM9200_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_US2,
- .end = AT91RM9200_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91rm9200_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */
- at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */
-}
-
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US3,
- .end = AT91RM9200_BASE_US3 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91RM9200_ID_US3,
- .end = AT91RM9200_ID_US3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart3_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91rm9200_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
- .platform_data = &uart3_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(void)
-{
- at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
- at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
-}
-
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_init_serial(struct at91_uart_config *config)
-{
- int i;
-
- /* Fill in list of supported UARTs */
- for (i = 0; i < config->nr_tty; i++) {
- switch (config->tty_map[i]) {
- case 0:
- configure_usart0_pins();
- at91_uarts[i] = &at91rm9200_uart0_device;
- at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
- break;
- case 1:
- configure_usart1_pins();
- at91_uarts[i] = &at91rm9200_uart1_device;
- at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
- break;
- case 2:
- configure_usart2_pins();
- at91_uarts[i] = &at91rm9200_uart2_device;
- at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
- break;
- case 3:
- configure_usart3_pins();
- at91_uarts[i] = &at91rm9200_uart3_device;
- at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
- break;
- case 4:
- configure_dbgu_pins();
- at91_uarts[i] = &at91rm9200_dbgu_device;
- at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
- break;
- default:
- continue;
- }
- at91_uarts[i]->id = i; /* update ID number to mapped ID */
- }
-
- /* Set serial console device */
- if (config->console_tty < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[config->console_tty];
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-}
-#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- at91_add_device_rtc();
- at91_add_device_watchdog();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
- *
- * Copyright (C) 2003 SAN People
- * Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/mach/time.h>
-
-#include <asm/arch/at91_st.h>
-
-static unsigned long last_crtr;
-
-/*
- * The ST_CRTR is updated asynchronously to the master clock. It is therefore
- * necessary to read it twice (with the same value) to ensure accuracy.
- */
-static inline unsigned long read_CRTR(void) {
- unsigned long x1, x2;
-
- do {
- x1 = at91_sys_read(AT91_ST_CRTR);
- x2 = at91_sys_read(AT91_ST_CRTR);
- } while (x1 != x2);
-
- return x1;
-}
-
-/*
- * Returns number of microseconds since last timer interrupt. Note that interrupts
- * will have been disabled by do_gettimeofday()
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy (linux/timex.h).
- */
-static unsigned long at91rm9200_gettimeoffset(void)
-{
- unsigned long elapsed;
-
- elapsed = (read_CRTR() - last_crtr) & AT91_ST_ALMV;
-
- return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
-}
-
-/*
- * IRQ handler for the timer.
- */
-static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
-{
- if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */
- write_seqlock(&xtime_lock);
-
- while (((read_CRTR() - last_crtr) & AT91_ST_ALMV) >= LATCH) {
- timer_tick();
- last_crtr = (last_crtr + LATCH) & AT91_ST_ALMV;
- }
-
- write_sequnlock(&xtime_lock);
-
- return IRQ_HANDLED;
- }
- else
- return IRQ_NONE; /* not handled */
-}
-
-static struct irqaction at91rm9200_timer_irq = {
- .name = "at91_tick",
- .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
- .handler = at91rm9200_timer_interrupt
-};
-
-void at91rm9200_timer_reset(void)
-{
- last_crtr = 0;
-
- /* Real time counter incremented every 30.51758 microseconds */
- at91_sys_write(AT91_ST_RTMR, 1);
-
- /* Set Period Interval timer */
- at91_sys_write(AT91_ST_PIMR, LATCH);
-
- /* Clear any pending interrupts */
- (void) at91_sys_read(AT91_ST_SR);
-
- /* Enable Period Interval Timer interrupt */
- at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
-}
-
-/*
- * Set up timer interrupt.
- */
-void __init at91rm9200_timer_init(void)
-{
- /* Disable all timer interrupts */
- at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
- (void) at91_sys_read(AT91_ST_SR); /* Clear any pending interrupts */
-
- /* Make IRQs happen for the system timer */
- setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
-
- /* Change the kernel's 'tick' value to 10009 usec. (the default is 10000) */
- tick_usec = (LATCH * 1000000) / CLOCK_TICK_RATE;
-
- /* Initialize and enable the timer interrupt */
- at91rm9200_timer_reset();
-}
-
-#ifdef CONFIG_PM
-static void at91rm9200_timer_suspend(void)
-{
- /* disable Period Interval Timer interrupt */
- at91_sys_write(AT91_ST_IDR, AT91_ST_PITS);
-}
-#else
-#define at91rm9200_timer_suspend NULL
-#endif
-
-struct sys_timer at91rm9200_timer = {
- .init = at91rm9200_timer_init,
- .offset = at91rm9200_gettimeoffset,
- .suspend = at91rm9200_timer_suspend,
- .resume = at91rm9200_timer_reset,
-};
-
+++ /dev/null
-/*
- * arch/arm/mach-at91rm9200/at91sam9260.c
- *
- * Copyright (C) 2006 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-
-#include "generic.h"
-#include "clock.h"
-
-static struct map_desc at91sam9260_io_desc[] __initdata = {
- {
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
- .length = AT91SAM9260_SRAM0_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
- .length = AT91SAM9260_SRAM1_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
- .name = "adc_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_ADC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
- .name = "mci_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_MCI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
- .name = "udc_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_UDP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TWI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ether_clk = {
- .name = "ether_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
- .name = "isi_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_ISI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
- .name = "usart3_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart4_clk = {
- .name = "usart4_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US4,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart5_clk = {
- .name = "usart5_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US5,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &adc_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &mmc_clk,
- &udc_clk,
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
- // ssc
- // tc0 .. tc2
- &ohci_clk,
- ðer_clk,
- &isi_clk,
- &usart3_clk,
- &usart4_clk,
- &usart5_clk,
- // tc3 .. tc5
- // irq0 .. irq2
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-
-static void __init at91sam9260_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clk_register(&pck0);
- clk_register(&pck1);
-}
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9260_gpio[] = {
- {
- .id = AT91SAM9260_ID_PIOA,
- .offset = AT91_PIOA,
- .clock = &pioA_clk,
- }, {
- .id = AT91SAM9260_ID_PIOB,
- .offset = AT91_PIOB,
- .clock = &pioB_clk,
- }, {
- .id = AT91SAM9260_ID_PIOC,
- .offset = AT91_PIOC,
- .clock = &pioC_clk,
- }
-};
-
-static void at91sam9260_reset(void)
-{
- at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
-
-/* --------------------------------------------------------------------
- * AT91SAM9260 processor initialization
- * -------------------------------------------------------------------- */
-
-void __init at91sam9260_initialize(unsigned long main_clock)
-{
- /* Map peripherals */
- iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
-
- at91_arch_reset = at91sam9260_reset;
- at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
- | (1 << AT91SAM9260_ID_IRQ2);
-
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at91sam9260_register_clocks();
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9260_gpio, 3);
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
- 0, /* Analog-to-Digital Converter */
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
- 0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller */
- 0,
- 0,
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 3, /* USB Host port */
- 3, /* Ethernet */
- 0, /* Image Sensor Interface */
- 6, /* USART 3 */
- 6, /* USART 4 */
- 6, /* USART 5 */
- 0, /* Timer Counter 3 */
- 0, /* Timer Counter 4 */
- 0, /* Timer Counter 5 */
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
-};
-
-void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- if (!priority)
- priority = at91sam9260_default_irq_priority;
-
- /* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
+++ /dev/null
-/*
- * arch/arm/mach-at91rm9200/at91sam9260_devices.c
- *
- * Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_device.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam926x_mc.h>
-#include <asm/arch/at91sam9260_matrix.h>
-
-#include "generic.h"
-
-#define SZ_512 0x00000200
-#define SZ_256 0x00000100
-#define SZ_16 0x00000010
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT91SAM9260_UHP_BASE,
- .end = AT91SAM9260_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_UHP,
- .end = AT91SAM9260_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- if (!data)
- return;
-
- usbh_data = *data;
- platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_USB_GADGET_AT91
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_UDP,
- .end = AT91SAM9260_BASE_UDP + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_UDP,
- .end = AT91SAM9260_ID_UDP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_udc_device = {
- .name = "at91_udc",
- .id = -1,
- .dev = {
- .platform_data = &udc_data,
- },
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
- if (!data)
- return;
-
- if (data->vbus_pin) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- udc_data = *data;
- platform_device_register(&at91_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
-static struct at91_eth_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_EMAC,
- .end = AT91SAM9260_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_EMAC,
- .end = AT91SAM9260_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_eth_device = {
- .name = "macb",
- .id = -1,
- .dev = {
- .dma_mask = ð_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = ð_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct at91_eth_data *data)
-{
- if (!data)
- return;
-
- if (data->phy_irq_pin) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Pins used for MII and RMII */
- at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
-
- if (!data->is_rmii) {
- at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
- }
-
- eth_data = *data;
- platform_device_register(&at91sam9260_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_MCI,
- .end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_MCI,
- .end = AT91SAM9260_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_mmc_device = {
- .name = "at91_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
-{
- if (!data)
- return;
-
- /* input/irq */
- if (data->det_pin) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (data->wp_pin)
- at91_set_gpio_input(data->wp_pin, 1);
- if (data->vcc_pin)
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA8, 0);
-
- if (data->slot_b) {
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PA5, 1);
- at91_set_B_periph(AT91_PIN_PA4, 1);
- at91_set_B_periph(AT91_PIN_PA3, 1);
- }
- } else {
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA7, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA6, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PA9, 1);
- at91_set_A_periph(AT91_PIN_PA10, 1);
- at91_set_A_periph(AT91_PIN_PA11, 1);
- }
- }
-
- mmc_data = *data;
- platform_device_register(&at91sam9260_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_8M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9260_nand_device = {
- .name = "at91_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct at91_nand_data *data)
-{
- unsigned long csa, mode;
-
- if (!data)
- return;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
-
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
- | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
-
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
- | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
-
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
-
- if (data->bus_width_16)
- mode = AT91_SMC_DBW_16;
- else
- mode = AT91_SMC_DBW_8;
- at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
-
- /* enable pin */
- if (data->enable_pin)
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (data->rdy_pin)
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (data->det_pin)
- at91_set_gpio_input(data->det_pin, 1);
-
- nand_data = *data;
- platform_device_register(&at91sam9260_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_TWI,
- .end = AT91SAM9260_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_TWI,
- .end = AT91SAM9260_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_twi_device = {
- .name = "at91_i2c",
- .id = -1,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(void)
-{
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA23, 1);
-
- at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA24, 1);
-
- platform_device_register(&at91sam9260_twi_device);
-}
-#else
-void __init at91_add_device_i2c(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_SPI0,
- .end = AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_SPI0,
- .end = AT91SAM9260_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_SPI1,
- .end = AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_SPI1,
- .end = AT91SAM9260_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
-
- at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
- platform_device_register(&at91sam9260_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
-
- at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
- platform_device_register(&at91sam9260_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
-}
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static struct platform_device at91sam9260_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US0,
- .end = AT91SAM9260_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_US0,
- .end = AT91SAM9260_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91sam9260_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
- at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US1,
- .end = AT91SAM9260_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_US1,
- .end = AT91SAM9260_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91sam9260_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
- at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
- at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US2,
- .end = AT91SAM9260_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_US2,
- .end = AT91SAM9260_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91sam9260_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
-}
-
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US3,
- .end = AT91SAM9260_BASE_US3 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_US3,
- .end = AT91SAM9260_ID_US3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart3_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91sam9260_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
- .platform_data = &uart3_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
- at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
-}
-
-static struct resource uart4_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US4,
- .end = AT91SAM9260_BASE_US4 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_US4,
- .end = AT91SAM9260_ID_US4,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart4_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91sam9260_uart4_device = {
- .name = "atmel_usart",
- .id = 5,
- .dev = {
- .platform_data = &uart4_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart4_resources,
- .num_resources = ARRAY_SIZE(uart4_resources),
-};
-
-static inline void configure_usart4_pins(void)
-{
- at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */
- at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */
-}
-
-static struct resource uart5_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US5,
- .end = AT91SAM9260_BASE_US5 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_ID_US5,
- .end = AT91SAM9260_ID_US5,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart5_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91sam9260_uart5_device = {
- .name = "atmel_usart",
- .id = 6,
- .dev = {
- .platform_data = &uart5_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart5_resources,
- .num_resources = ARRAY_SIZE(uart5_resources),
-};
-
-static inline void configure_usart5_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */
- at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
-}
-
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_init_serial(struct at91_uart_config *config)
-{
- int i;
-
- /* Fill in list of supported UARTs */
- for (i = 0; i < config->nr_tty; i++) {
- switch (config->tty_map[i]) {
- case 0:
- configure_usart0_pins();
- at91_uarts[i] = &at91sam9260_uart0_device;
- at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
- break;
- case 1:
- configure_usart1_pins();
- at91_uarts[i] = &at91sam9260_uart1_device;
- at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
- break;
- case 2:
- configure_usart2_pins();
- at91_uarts[i] = &at91sam9260_uart2_device;
- at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
- break;
- case 3:
- configure_usart3_pins();
- at91_uarts[i] = &at91sam9260_uart3_device;
- at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
- break;
- case 4:
- configure_usart4_pins();
- at91_uarts[i] = &at91sam9260_uart4_device;
- at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart");
- break;
- case 5:
- configure_usart5_pins();
- at91_uarts[i] = &at91sam9260_uart5_device;
- at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart");
- break;
- case 6:
- configure_dbgu_pins();
- at91_uarts[i] = &at91sam9260_dbgu_device;
- at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart");
- break;
- default:
- continue;
- }
- at91_uarts[i]->id = i; /* update ID number to mapped ID */
- }
-
- /* Set serial console device */
- if (config->console_tty < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[config->console_tty];
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-}
-#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
+++ /dev/null
-/*
- * arch/arm/mach-at91rm9200/at91sam9261.c
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-
-#include "generic.h"
-#include "clock.h"
-
-static struct map_desc at91sam9261_io_desc[] __initdata = {
- {
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
- .pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE),
- .length = AT91SAM9261_SRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
- .name = "mci_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_MCI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
- .name = "udc_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_UDP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_TWI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &mmc_clk,
- &udc_clk,
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
- // ssc 0 .. ssc2
- // tc0 .. tc2
- &ohci_clk,
- &lcdc_clk,
- // irq0 .. irq2
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-static struct clk pck3 = {
- .name = "pck3",
- .pmc_mask = AT91_PMC_PCK3,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 3,
-};
-
-/* HClocks */
-static struct clk hck0 = {
- .name = "hck0",
- .pmc_mask = AT91_PMC_HCK0,
- .type = CLK_TYPE_SYSTEM,
- .id = 0,
-};
-static struct clk hck1 = {
- .name = "hck1",
- .pmc_mask = AT91_PMC_HCK1,
- .type = CLK_TYPE_SYSTEM,
- .id = 1,
-};
-
-static void __init at91sam9261_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
- clk_register(&pck3);
-
- clk_register(&hck0);
- clk_register(&hck1);
-}
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9261_gpio[] = {
- {
- .id = AT91SAM9261_ID_PIOA,
- .offset = AT91_PIOA,
- .clock = &pioA_clk,
- }, {
- .id = AT91SAM9261_ID_PIOB,
- .offset = AT91_PIOB,
- .clock = &pioB_clk,
- }, {
- .id = AT91SAM9261_ID_PIOC,
- .offset = AT91_PIOC,
- .clock = &pioC_clk,
- }
-};
-
-static void at91sam9261_reset(void)
-{
- at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
-
-/* --------------------------------------------------------------------
- * AT91SAM9261 processor initialization
- * -------------------------------------------------------------------- */
-
-void __init at91sam9261_initialize(unsigned long main_clock)
-{
- /* Map peripherals */
- iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
-
- at91_arch_reset = at91sam9261_reset;
- at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
- | (1 << AT91SAM9261_ID_IRQ2);
-
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at91sam9261_register_clocks();
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9261_gpio, 3);
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
- 0,
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
- 0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 5, /* Serial Synchronous Controller 2 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 3, /* USB Host port */
- 3, /* LCD Controller */
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
-};
-
-void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- if (!priority)
- priority = at91sam9261_default_irq_priority;
-
- /* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
+++ /dev/null
-/*
- * arch/arm/mach-at91rm9200/at91sam9261_devices.c
- *
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_device.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam926x_mc.h>
-
-#include "generic.h"
-
-#define SZ_512 0x00000200
-#define SZ_256 0x00000100
-#define SZ_16 0x00000010
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT91SAM9261_UHP_BASE,
- .end = AT91SAM9261_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_UHP,
- .end = AT91SAM9261_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- if (!data)
- return;
-
- usbh_data = *data;
- platform_device_register(&at91sam9261_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_USB_GADGET_AT91
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_UDP,
- .end = AT91SAM9261_BASE_UDP + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_UDP,
- .end = AT91SAM9261_ID_UDP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_udc_device = {
- .name = "at91_udc",
- .id = -1,
- .dev = {
- .platform_data = &udc_data,
- },
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
- unsigned long x;
-
- if (!data)
- return;
-
- if (data->vbus_pin) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- }
-
- /* Pullup pin is handled internally */
- x = at91_sys_read(AT91_MATRIX_USBPUCR);
- at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
-
- udc_data = *data;
- platform_device_register(&at91sam9261_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_MCI,
- .end = AT91SAM9261_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_MCI,
- .end = AT91SAM9261_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_mmc_device = {
- .name = "at91_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
-{
- if (!data)
- return;
-
- /* input/irq */
- if (data->det_pin) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (data->wp_pin)
- at91_set_gpio_input(data->wp_pin, 1);
- if (data->vcc_pin)
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_B_periph(AT91_PIN_PA2, 0);
-
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA0, 1);
- if (data->wire4) {
- at91_set_B_periph(AT91_PIN_PA4, 1);
- at91_set_B_periph(AT91_PIN_PA5, 1);
- at91_set_B_periph(AT91_PIN_PA6, 1);
- }
-
- mmc_data = *data;
- platform_device_register(&at91sam9261_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91_nand_device = {
- .name = "at91_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct at91_nand_data *data)
-{
- unsigned long csa, mode;
-
- if (!data)
- return;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
-
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
- | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
-
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
- | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
-
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
-
- if (data->bus_width_16)
- mode = AT91_SMC_DBW_16;
- else
- mode = AT91_SMC_DBW_8;
- at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
-
- /* enable pin */
- if (data->enable_pin)
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (data->rdy_pin)
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (data->det_pin)
- at91_set_gpio_input(data->det_pin, 1);
-
- at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
- at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */
-
- nand_data = *data;
- platform_device_register(&at91_nand_device);
-}
-
-#else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_TWI,
- .end = AT91SAM9261_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_TWI,
- .end = AT91SAM9261_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_twi_device = {
- .name = "at91_i2c",
- .id = -1,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(void)
-{
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA7, 1);
-
- at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA8, 1);
-
- platform_device_register(&at91sam9261_twi_device);
-}
-#else
-void __init at91_add_device_i2c(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_SPI0,
- .end = AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_SPI0,
- .end = AT91SAM9261_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_SPI1,
- .end = AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_SPI1,
- .end = AT91SAM9261_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
- platform_device_register(&at91sam9261_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PB30, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */
-
- at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
- platform_device_register(&at91sam9261_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
-static u64 lcdc_dmamask = 0xffffffffUL;
-static struct at91fb_info lcdc_data;
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .start = AT91SAM9261_LCDC_BASE,
- .end = AT91SAM9261_LCDC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_LCDC,
- .end = AT91SAM9261_ID_LCDC,
- .flags = IORESOURCE_IRQ,
- },
-#if defined(CONFIG_FB_INTSRAM)
- [2] = {
- .start = AT91SAM9261_SRAM_BASE,
- .end = AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-#endif
-};
-
-static struct platform_device at91_lcdc_device = {
- .name = "at91-fb",
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
- .num_resources = ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct at91fb_info *data)
-{
- if (!data) {
- return;
- }
-
- at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
- at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */
- at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */
- at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */
- at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
- at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
- at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
-
- lcdc_data = *data;
- platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct at91fb_info *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * LEDs
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
-
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-{
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
-}
-#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static struct platform_device at91sam9261_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_US0,
- .end = AT91SAM9261_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_US0,
- .end = AT91SAM9261_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91sam9261_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_US1,
- .end = AT91SAM9261_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_US1,
- .end = AT91SAM9261_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91sam9261_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_US2,
- .end = AT91SAM9261_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_ID_US2,
- .end = AT91SAM9261_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct platform_device at91sam9261_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
- at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
-}
-
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_init_serial(struct at91_uart_config *config)
-{
- int i;
-
- /* Fill in list of supported UARTs */
- for (i = 0; i < config->nr_tty; i++) {
- switch (config->tty_map[i]) {
- case 0:
- configure_usart0_pins();
- at91_uarts[i] = &at91sam9261_uart0_device;
- at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
- break;
- case 1:
- configure_usart1_pins();
- at91_uarts[i] = &at91sam9261_uart1_device;
- at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
- break;
- case 2:
- configure_usart2_pins();
- at91_uarts[i] = &at91sam9261_uart2_device;
- at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
- break;
- case 3:
- configure_dbgu_pins();
- at91_uarts[i] = &at91sam9261_dbgu_device;
- at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart");
- break;
- default:
- continue;
- }
- at91_uarts[i]->id = i; /* update ID number to mapped ID */
- }
-
- /* Set serial console device */
- if (config->console_tty < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[config->console_tty];
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-}
-#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c
- *
- * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
- * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/mach/time.h>
-
-#include <asm/arch/at91_pit.h>
-
-
-#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV)
-#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20)
-
-/*
- * Returns number of microseconds since last timer interrupt. Note that interrupts
- * will have been disabled by do_gettimeofday()
- * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy (linux/timex.h).
- */
-static unsigned long at91sam926x_gettimeoffset(void)
-{
- unsigned long elapsed;
- unsigned long t = at91_sys_read(AT91_PIT_PIIR);
-
- elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
-
- return (unsigned long)(elapsed * 1000000) / LATCH;
-}
-
-/*
- * IRQ handler for the timer.
- */
-static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
-{
- volatile long nr_ticks;
-
- if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */
- write_seqlock(&xtime_lock);
-
- /* Get number to ticks performed before interrupt and clear PIT interrupt */
- nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
- do {
- timer_tick();
- nr_ticks--;
- } while (nr_ticks);
-
- write_sequnlock(&xtime_lock);
- return IRQ_HANDLED;
- } else
- return IRQ_NONE; /* not handled */
-}
-
-static struct irqaction at91sam926x_timer_irq = {
- .name = "at91_tick",
- .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER,
- .handler = at91sam926x_timer_interrupt
-};
-
-void at91sam926x_timer_reset(void)
-{
- /* Disable timer */
- at91_sys_write(AT91_PIT_MR, 0);
-
- /* Clear any pending interrupts */
- (void) at91_sys_read(AT91_PIT_PIVR);
-
- /* Set Period Interval timer and enable its interrupt */
- at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
-}
-
-/*
- * Set up timer interrupt.
- */
-void __init at91sam926x_timer_init(void)
-{
- /* Initialize and enable the timer */
- at91sam926x_timer_reset();
-
- /* Make IRQs happen for the system timer. */
- setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
-}
-
-#ifdef CONFIG_PM
-static void at91sam926x_timer_suspend(void)
-{
- /* Disable timer */
- at91_sys_write(AT91_PIT_MR, 0);
-}
-#else
-#define at91sam926x_timer_suspend NULL
-#endif
-
-struct sys_timer at91sam926x_timer = {
- .init = at91sam926x_timer_init,
- .offset = at91sam926x_gettimeoffset,
- .suspend = at91sam926x_timer_suspend,
- .resume = at91sam926x_timer_reset,
-};
-
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/board-1arm.c
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata onearm_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 3,
- .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */
-};
-
-static void __init onearm_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-
- /* Setup the serial ports and console */
- at91_init_serial(&onearm_uart_config);
-}
-
-static void __init onearm_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata onearm_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata onearm_usbh_data = {
- .ports = 1,
-};
-
-static struct at91_udc_data __initdata onearm_udc_data = {
- .vbus_pin = AT91_PIN_PC2,
- .pullup_pin = AT91_PIN_PC3,
-};
-
-static void __init onearm_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&onearm_eth_data);
- /* USB Host */
- at91_add_device_usbh(&onearm_usbh_data);
- /* USB Device */
- at91_add_device_udc(&onearm_udc_data);
-}
-
-MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = onearm_map_io,
- .init_irq = onearm_init_irq,
- .init_machine = onearm_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/board-carmeva.c
- *
- * Copyright (c) 2005 Peer Georgi
- * Conitec Datasystems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata carmeva_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
-static void __init carmeva_map_io(void)
-{
- /* Initialize processor: 20.000 MHz crystal */
- at91rm9200_initialize(20000000, AT91RM9200_BGA);
-
- /* Setup the serial ports and console */
- at91_init_serial(&carmeva_uart_config);
-}
-
-static void __init carmeva_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata carmeva_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata carmeva_usbh_data = {
- .ports = 2,
-};
-
-static struct at91_udc_data __initdata carmeva_udc_data = {
- .vbus_pin = AT91_PIN_PD12,
- .pullup_pin = AT91_PIN_PD9,
-};
-
-/* FIXME: user dependend */
-// static struct at91_cf_data __initdata carmeva_cf_data = {
-// .det_pin = AT91_PIN_PB0,
-// .rst_pin = AT91_PIN_PC5,
- // .irq_pin = ... not connected
- // .vcc_pin = ... always powered
-// };
-
-static struct at91_mmc_data __initdata carmeva_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
- .det_pin = AT91_PIN_PB10,
- .wp_pin = AT91_PIN_PC14,
-};
-
-static struct spi_board_info carmeva_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- },
- { /* User accessable spi - cs1 (250KHz) */
- .modalias = "spi-cs1",
- .chip_select = 1,
- .max_speed_hz = 250 * 1000,
- },
- { /* User accessable spi - cs2 (1MHz) */
- .modalias = "spi-cs2",
- .chip_select = 2,
- .max_speed_hz = 1 * 1000 * 1000,
- },
- { /* User accessable spi - cs3 (10MHz) */
- .modalias = "spi-cs3",
- .chip_select = 3,
- .max_speed_hz = 10 * 1000 * 1000,
- },
-};
-
-static void __init carmeva_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&carmeva_eth_data);
- /* USB Host */
- at91_add_device_usbh(&carmeva_usbh_data);
- /* USB Device */
- at91_add_device_udc(&carmeva_udc_data);
- /* I2C */
- at91_add_device_i2c();
- /* SPI */
- at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
- /* Compact Flash */
-// at91_add_device_cf(&carmeva_cf_data);
- /* MMC */
- at91_add_device_mmc(&carmeva_mmc_data);
-}
-
-MACHINE_START(CARMEVA, "Carmeva")
- /* Maintainer: Conitec Datasystems */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = carmeva_map_io,
- .init_irq = carmeva_init_irq,
- .init_machine = carmeva_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/board-csb337.c
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata csb337_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
-static void __init csb337_map_io(void)
-{
- /* Initialize processor: 3.6864 MHz crystal */
- at91rm9200_initialize(3686400, AT91RM9200_BGA);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
- /* Setup the serial ports and console */
- at91_init_serial(&csb337_uart_config);
-}
-
-static void __init csb337_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata csb337_eth_data = {
- .phy_irq_pin = AT91_PIN_PC2,
- .is_rmii = 0,
-};
-
-static struct at91_usbh_data __initdata csb337_usbh_data = {
- .ports = 2,
-};
-
-static struct at91_udc_data __initdata csb337_udc_data = {
- // this has no VBUS sensing pin
- .pullup_pin = AT91_PIN_PA24,
-};
-
-static struct at91_cf_data __initdata csb337_cf_data = {
- /*
- * connector P4 on the CSB 337 mates to
- * connector P8 on the CSB 300CF
- */
-
- /* CSB337 specific */
- .det_pin = AT91_PIN_PC3,
-
- /* CSB300CF specific */
- .irq_pin = AT91_PIN_PA19,
- .vcc_pin = AT91_PIN_PD0,
- .rst_pin = AT91_PIN_PD2,
-};
-
-static struct at91_mmc_data __initdata csb337_mmc_data = {
- .det_pin = AT91_PIN_PD5,
- .slot_b = 0,
- .wire4 = 1,
- .wp_pin = AT91_PIN_PD6,
-};
-
-static struct spi_board_info csb337_spi_devices[] = {
- { /* CAN controller */
- .modalias = "sak82c900",
- .chip_select = 0,
- .max_speed_hz = 6 * 1000 * 1000,
- },
-};
-
-static void __init csb337_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&csb337_eth_data);
- /* USB Host */
- at91_add_device_usbh(&csb337_usbh_data);
- /* USB Device */
- at91_add_device_udc(&csb337_udc_data);
- /* I2C */
- at91_add_device_i2c();
- /* Compact Flash */
- at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
- at91_add_device_cf(&csb337_cf_data);
- /* SPI */
- at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
- /* MMC */
- at91_add_device_mmc(&csb337_mmc_data);
-}
-
-MACHINE_START(CSB337, "Cogent CSB337")
- /* Maintainer: Bill Gatliff */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = csb337_map_io,
- .init_irq = csb337_init_irq,
- .init_machine = csb337_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/board-csb637.c
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata csb637_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
-static void __init csb637_map_io(void)
-{
- /* Initialize processor: 3.6864 MHz crystal */
- at91rm9200_initialize(3686400, AT91RM9200_BGA);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
- /* Setup the serial ports and console */
- at91_init_serial(&csb637_uart_config);
-}
-
-static void __init csb637_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata csb637_eth_data = {
- .phy_irq_pin = AT91_PIN_PC0,
- .is_rmii = 0,
-};
-
-static struct at91_usbh_data __initdata csb637_usbh_data = {
- .ports = 2,
-};
-
-static struct at91_udc_data __initdata csb637_udc_data = {
- .vbus_pin = AT91_PIN_PB28,
- .pullup_pin = AT91_PIN_PB1,
-};
-
-static void __init csb637_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&csb637_eth_data);
- /* USB Host */
- at91_add_device_usbh(&csb637_usbh_data);
- /* USB Device */
- at91_add_device_udc(&csb637_udc_data);
- /* I2C */
- at91_add_device_i2c();
- /* SPI */
- at91_add_device_spi(NULL, 0);
-}
-
-MACHINE_START(CSB637, "Cogent CSB637")
- /* Maintainer: Bill Gatliff */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = csb637_map_io,
- .init_irq = csb637_init_irq,
- .init_machine = csb637_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/board-dk.c
- *
- * Copyright (C) 2005 SAN People
- *
- * Epson S1D framebuffer glue code is:
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata dk_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
-static void __init dk_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_BGA);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
- /* Setup the serial ports and console */
- at91_init_serial(&dk_uart_config);
-}
-
-static void __init dk_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata dk_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata dk_usbh_data = {
- .ports = 2,
-};
-
-static struct at91_udc_data __initdata dk_udc_data = {
- .vbus_pin = AT91_PIN_PD4,
- .pullup_pin = AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata dk_cf_data = {
- .det_pin = AT91_PIN_PB0,
- .rst_pin = AT91_PIN_PC5,
- // .irq_pin = ... not connected
- // .vcc_pin = ... always powered
-};
-
-static struct at91_mmc_data __initdata dk_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
-};
-
-static struct spi_board_info dk_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- },
- { /* UR6HCPS2-SP40 PS2-to-SPI adapter */
- .modalias = "ur6hcps2",
- .chip_select = 1,
- .max_speed_hz = 250 * 1000,
- },
- { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
- .modalias = "tlv1504",
- .chip_select = 2,
- .max_speed_hz = 20 * 1000 * 1000,
- },
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 3,
- .max_speed_hz = 15 * 1000 * 1000,
- }
-#endif
-};
-
-static struct mtd_partition __initdata dk_nand_partition[] = {
- {
- .name = "NAND Partition 1",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(dk_nand_partition);
- return dk_nand_partition;
-}
-
-static struct at91_nand_data __initdata dk_nand_data = {
- .ale = 22,
- .cle = 21,
- .det_pin = AT91_PIN_PB1,
- .rdy_pin = AT91_PIN_PC2,
- // .enable_pin = ... not there
- .partition_info = nand_partitions,
-};
-
-#define DK_FLASH_BASE AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE 0x200000
-
-static struct physmap_flash_data dk_flash_data = {
- .width = 2,
-};
-
-static struct resource dk_flash_resource = {
- .start = DK_FLASH_BASE,
- .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device dk_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &dk_flash_data,
- },
- .resource = &dk_flash_resource,
- .num_resources = 1,
-};
-
-
-static void __init dk_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&dk_eth_data);
- /* USB Host */
- at91_add_device_usbh(&dk_usbh_data);
- /* USB Device */
- at91_add_device_udc(&dk_udc_data);
- at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
- /* Compact Flash */
- at91_add_device_cf(&dk_cf_data);
- /* I2C */
- at91_add_device_i2c();
- /* SPI */
- at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card */
- at91_set_gpio_output(AT91_PIN_PB7, 0);
-#else
- /* MMC */
- at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(&dk_mmc_data);
-#endif
- /* NAND */
- at91_add_device_nand(&dk_nand_data);
- /* NOR Flash */
- platform_device_register(&dk_flash);
- /* VGA */
-// dk_add_device_video();
-}
-
-MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
- /* Maintainer: SAN People/Atmel */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = dk_map_io,
- .init_irq = dk_init_irq,
- .init_machine = dk_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/board-eb9200.c
- *
- * Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
- * by Andrew Patrikalakis
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata eb9200_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
-static void __init eb9200_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_BGA);
-
- /* Setup the serial ports and console */
- at91_init_serial(&eb9200_uart_config);
-}
-
-static void __init eb9200_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata eb9200_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata eb9200_usbh_data = {
- .ports = 2,
-};
-
-static struct at91_udc_data __initdata eb9200_udc_data = {
- .vbus_pin = AT91_PIN_PD4,
- .pullup_pin = AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata eb9200_cf_data = {
- .det_pin = AT91_PIN_PB0,
- .rst_pin = AT91_PIN_PC5,
- // .irq_pin = ... not connected
- // .vcc_pin = ... always powered
-};
-
-static struct at91_mmc_data __initdata eb9200_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
-};
-
-static void __init eb9200_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&eb9200_eth_data);
- /* USB Host */
- at91_add_device_usbh(&eb9200_usbh_data);
- /* USB Device */
- at91_add_device_udc(&eb9200_udc_data);
- /* I2C */
- at91_add_device_i2c();
- /* Compact Flash */
- at91_add_device_cf(&eb9200_cf_data);
- /* SPI */
- at91_add_device_spi(NULL, 0);
- /* MMC */
- /* only supports 1 or 4 bit interface, not wired through to SPI */
- at91_add_device_mmc(&eb9200_mmc_data);
-}
-
-MACHINE_START(ATEB9200, "Embest ATEB9200")
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = eb9200_map_io,
- .init_irq = eb9200_init_irq,
- .init_machine = eb9200_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
- *
- * Copyright (C) 2005 SAN People
- *
- * Epson S1D framebuffer glue code is:
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
-static void __init ek_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_BGA);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
- /* Setup the serial ports and console */
- at91_init_serial(&ek_uart_config);
-}
-
-static void __init ek_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata ek_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PD4,
- .pullup_pin = AT91_PIN_PD5,
-};
-
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .det_pin = AT91_PIN_PB27,
- .slot_b = 0,
- .wire4 = 1,
- .wp_pin = AT91_PIN_PA17,
-};
-
-static struct spi_board_info ek_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- },
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 3,
- .max_speed_hz = 15 * 1000 * 1000,
- },
-#endif
-};
-
-#define EK_FLASH_BASE AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE 0x200000
-
-static struct physmap_flash_data ek_flash_data = {
- .width = 2,
-};
-
-static struct resource ek_flash_resource = {
- .start = EK_FLASH_BASE,
- .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ek_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &ek_flash_data,
- },
- .resource = &ek_flash_resource,
- .num_resources = 1,
-};
-
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&ek_eth_data);
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
- /* I2C */
- at91_add_device_i2c();
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card */
- at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
- /* MMC */
- at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(&ek_mmc_data);
-#endif
- /* NOR Flash */
- platform_device_register(&ek_flash);
- /* VGA */
-// ek_add_device_video();
-}
-
-MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
- /* Maintainer: SAN People/Atmel */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = ek_map_io,
- .init_irq = ek_init_irq,
- .init_machine = ek_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/board-kafa.c
- *
- * Copyright (C) 2006 Sperry-Sun
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata kafa_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
-static void __init kafa_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
- /* Setup the serial ports and console */
- at91_init_serial(&kafa_uart_config);
-}
-
-static void __init kafa_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata kafa_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 0,
-};
-
-static struct at91_usbh_data __initdata kafa_usbh_data = {
- .ports = 1,
-};
-
-static struct at91_udc_data __initdata kafa_udc_data = {
- .vbus_pin = AT91_PIN_PB6,
- .pullup_pin = AT91_PIN_PB7,
-};
-
-static void __init kafa_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&kafa_eth_data);
- /* USB Host */
- at91_add_device_usbh(&kafa_usbh_data);
- /* USB Device */
- at91_add_device_udc(&kafa_udc_data);
- /* I2C */
- at91_add_device_i2c();
- /* SPI */
- at91_add_device_spi(NULL, 0);
-}
-
-MACHINE_START(KAFA, "Sperry-Sun KAFA")
- /* Maintainer: Sergei Sharonov */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = kafa_map_io,
- .init_irq = kafa_init_irq,
- .init_machine = kafa_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/board-kb9202.c
- *
- * Copyright (c) 2005 kb_admin
- * KwikByte, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata kb9202_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 3,
- .tty_map = { 4, 0, 1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
-static void __init kb9202_map_io(void)
-{
- /* Initialize processor: 10 MHz crystal */
- at91rm9200_initialize(10000000, AT91RM9200_PQFP);
-
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
- /* Setup the serial ports and console */
- at91_init_serial(&kb9202_uart_config);
-}
-
-static void __init kb9202_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata kb9202_eth_data = {
- .phy_irq_pin = AT91_PIN_PB29,
- .is_rmii = 0,
-};
-
-static struct at91_usbh_data __initdata kb9202_usbh_data = {
- .ports = 1,
-};
-
-static struct at91_udc_data __initdata kb9202_udc_data = {
- .vbus_pin = AT91_PIN_PB24,
- .pullup_pin = AT91_PIN_PB22,
-};
-
-static struct at91_mmc_data __initdata kb9202_mmc_data = {
- .det_pin = AT91_PIN_PB2,
- .slot_b = 0,
- .wire4 = 1,
-};
-
-static struct mtd_partition __initdata kb9202_nand_partition[] = {
- {
- .name = "nand_fs",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(kb9202_nand_partition);
- return kb9202_nand_partition;
-}
-
-static struct at91_nand_data __initdata kb9202_nand_data = {
- .ale = 22,
- .cle = 21,
- // .det_pin = ... not there
- .rdy_pin = AT91_PIN_PC29,
- .enable_pin = AT91_PIN_PC28,
- .partition_info = nand_partitions,
-};
-
-static void __init kb9202_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&kb9202_eth_data);
- /* USB Host */
- at91_add_device_usbh(&kb9202_usbh_data);
- /* USB Device */
- at91_add_device_udc(&kb9202_udc_data);
- /* MMC */
- at91_add_device_mmc(&kb9202_mmc_data);
- /* I2C */
- at91_add_device_i2c();
- /* SPI */
- at91_add_device_spi(NULL, 0);
- /* NAND */
- at91_add_device_nand(&kb9202_nand_data);
-}
-
-MACHINE_START(KB9200, "KB920x")
- /* Maintainer: KwikByte, Inc. */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = kb9202_map_io,
- .init_irq = kb9202_init_irq,
- .init_machine = kb9202_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam926x_mc.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- * 0 .. 5 = USART0 .. USART5
- * 6 = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 3,
- .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
-};
-
-static void __init ek_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
-
- /* Setup the serial ports and console */
- at91_init_serial(&ek_uart_config);
-}
-
-static void __init ek_init_irq(void)
-{
- at91sam9260_init_interrupts(NULL);
-}
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#endif
-#if defined(CONFIG_SND_AT73C213)
- { /* AT73C213 DAC */
- .modalias = "snd_at73c213",
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 1,
- },
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct __initdata at91_eth_data ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA7,
- .is_rmii = 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Partition 1",
- .offset = 0,
- .size = 256 * 1024,
- },
- {
- .name = "Partition 2",
- .offset = 256 * 1024,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
-static struct at91_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
-// .det_pin = ... not connected
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 1,
- .wire4 = 1,
-// .det_pin = ... not connected
-// .wp_pin = ... not connected
-// .vcc_pin = ... not connected
-};
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* NAND */
- at91_add_device_nand(&ek_nand_data);
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* MMC */
- at91_add_device_mmc(&ek_mmc_data);
-}
-
-MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
- /* Maintainer: Atmel */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91sam926x_timer,
- .map_io = ek_map_io,
- .init_irq = ek_init_irq,
- .init_machine = ek_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/dm9000.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam926x_mc.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- * 0 .. 2 = USART0 .. USART2
- * 3 = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 1,
- .tty_map = { 3, -1, -1, -1 } /* ttyS0, ..., ttyS3 */
-};
-
-static void __init ek_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9261_initialize(18432000);
-
- /* Setup the serial ports and console */
- at91_init_serial(&ek_uart_config);
-}
-
-static void __init ek_init_irq(void)
-{
- at91sam9261_init_interrupts(NULL);
-}
-
-
-/*
- * DM9000 ethernet device
- */
-#if defined(CONFIG_DM9000)
-static struct resource at91sam9261_dm9000_resource[] = {
- [0] = {
- .start = AT91_CHIPSELECT_2,
- .end = AT91_CHIPSELECT_2 + 3,
- .flags = IORESOURCE_MEM
- },
- [1] = {
- .start = AT91_CHIPSELECT_2 + 0x44,
- .end = AT91_CHIPSELECT_2 + 0xFF,
- .flags = IORESOURCE_MEM
- },
- [2] = {
- .start = AT91_PIN_PC11,
- .end = AT91_PIN_PC11,
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct dm9000_plat_data dm9000_platdata = {
- .flags = DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device at91sam9261_dm9000_device = {
- .name = "dm9000",
- .id = 0,
- .num_resources = ARRAY_SIZE(at91sam9261_dm9000_resource),
- .resource = at91sam9261_dm9000_resource,
- .dev = {
- .platform_data = &dm9000_platdata,
- }
-};
-
-static void __init ek_add_device_dm9000(void)
-{
- /*
- * Configure Chip-Select 2 on SMC for the DM9000.
- * Note: These timings were calculated for MASTER_CLOCK = 100000000
- * according to the DM9000 timings.
- */
- at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(2), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
- at91_sys_write(AT91_SMC_CYCLE(2), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
- at91_sys_write(AT91_SMC_MODE(2), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
-
- /* Configure Reset signal as output */
- at91_set_gpio_output(AT91_PIN_PC10, 0);
-
- /* Configure Interrupt pin as input, no pull-up */
- at91_set_gpio_input(AT91_PIN_PC11, 0);
-
- platform_device_register(&at91sam9261_dm9000_device);
-}
-#else
-static void __init ek_add_device_dm9000(void) {}
-#endif /* CONFIG_DM9000 */
-
-
-/*
- * USB Host Port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-
-/*
- * USB Device Port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PB29,
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .wire4 = 1,
-// .det_pin = ... not connected
-// .wp_pin = ... not connected
-// .vcc_pin = ... not connected
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Partition 1",
- .offset = 0,
- .size = 256 * 1024,
- },
- {
- .name = "Partition 2",
- .offset = 256 * 1024 ,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
-static struct at91_nand_data __initdata ek_nand_data = {
- .ale = 22,
- .cle = 21,
-// .det_pin = ... not connected
- .rdy_pin = AT91_PIN_PC15,
- .enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
- .bus_width_16 = 1,
-#else
- .bus_width_16 = 0,
-#endif
-};
-
-/*
- * SPI devices
- */
-static struct spi_board_info ek_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
- .modalias = "mtd_dataflash",
- .chip_select = 3,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#elif defined(CONFIG_SND_AT73C213)
- { /* AT73C213 DAC */
- .modalias = "snd_at73c213",
- .chip_select = 3,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-};
-
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* I2C */
- at91_add_device_i2c();
- /* NAND */
- at91_add_device_nand(&ek_nand_data);
- /* DM9000 ethernet */
- ek_add_device_dm9000();
-
- /* spi0 and mmc/sd share the same PIO pins */
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-#else
- /* MMC */
- at91_add_device_mmc(&ek_mmc_data);
-#endif
-}
-
-MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
- /* Maintainer: Atmel */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91sam926x_timer,
- .map_io = ek_map_io,
- .init_irq = ek_init_irq,
- .init_machine = ek_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/clock.c
- *
- * Copyright (C) 2005 David Brownell
- * Copyright (C) 2005 Ivan Kokshaysky
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-
-#include <asm/semaphore.h>
-#include <asm/io.h>
-#include <asm/mach-types.h>
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/cpu.h>
-
-#include "clock.h"
-
-
-/*
- * There's a lot more which can be done with clocks, including cpufreq
- * integration, slow clock mode support (for system suspend), letting
- * PLLB be used at other rates (on boards that don't need USB), etc.
- */
-
-#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY)
-#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE)
-#define clk_is_peripheral(x) ((x)->type & CLK_TYPE_PERIPHERAL)
-#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM)
-
-
-static LIST_HEAD(clocks);
-static DEFINE_SPINLOCK(clk_lock);
-
-static u32 at91_pllb_usb_init;
-
-/*
- * Four primary clock sources: two crystal oscillators (32K, main), and
- * two PLLs. PLLA usually runs the master clock; and PLLB must run at
- * 48 MHz (unless no USB function clocks are needed). The main clock and
- * both PLLs are turned off to run in "slow clock mode" (system suspend).
- */
-static struct clk clk32k = {
- .name = "clk32k",
- .rate_hz = AT91_SLOW_CLOCK,
- .users = 1, /* always on */
- .id = 0,
- .type = CLK_TYPE_PRIMARY,
-};
-static struct clk main_clk = {
- .name = "main",
- .pmc_mask = AT91_PMC_MOSCS, /* in PMC_SR */
- .id = 1,
- .type = CLK_TYPE_PRIMARY,
-};
-static struct clk plla = {
- .name = "plla",
- .parent = &main_clk,
- .pmc_mask = AT91_PMC_LOCKA, /* in PMC_SR */
- .id = 2,
- .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
-};
-
-static void pllb_mode(struct clk *clk, int is_on)
-{
- u32 value;
-
- if (is_on) {
- is_on = AT91_PMC_LOCKB;
- value = at91_pllb_usb_init;
- } else
- value = 0;
-
- // REVISIT: Add work-around for AT91RM9200 Errata #26 ?
- at91_sys_write(AT91_CKGR_PLLBR, value);
-
- do {
- cpu_relax();
- } while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
-}
-
-static struct clk pllb = {
- .name = "pllb",
- .parent = &main_clk,
- .pmc_mask = AT91_PMC_LOCKB, /* in PMC_SR */
- .mode = pllb_mode,
- .id = 3,
- .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
-};
-
-static void pmc_sys_mode(struct clk *clk, int is_on)
-{
- if (is_on)
- at91_sys_write(AT91_PMC_SCER, clk->pmc_mask);
- else
- at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
-}
-
-/* USB function clocks (PLLB must be 48 MHz) */
-static struct clk udpck = {
- .name = "udpck",
- .parent = &pllb,
- .mode = pmc_sys_mode,
-};
-static struct clk uhpck = {
- .name = "uhpck",
- .parent = &pllb,
- .mode = pmc_sys_mode,
-};
-
-
-/*
- * The master clock is divided from the CPU clock (by 1-4). It's used for
- * memory, interfaces to on-chip peripherals, the AIC, and sometimes more
- * (e.g baud rate generation). It's sourced from one of the primary clocks.
- */
-static struct clk mck = {
- .name = "mck",
- .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */
-};
-
-static void pmc_periph_mode(struct clk *clk, int is_on)
-{
- if (is_on)
- at91_sys_write(AT91_PMC_PCER, clk->pmc_mask);
- else
- at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
-}
-
-static struct clk __init *at91_css_to_clk(unsigned long css)
-{
- switch (css) {
- case AT91_PMC_CSS_SLOW:
- return &clk32k;
- case AT91_PMC_CSS_MAIN:
- return &main_clk;
- case AT91_PMC_CSS_PLLA:
- return &plla;
- case AT91_PMC_CSS_PLLB:
- return &pllb;
- }
-
- return NULL;
-}
-
-/*
- * Associate a particular clock with a function (eg, "uart") and device.
- * The drivers can then request the same 'function' with several different
- * devices and not care about which clock name to use.
- */
-void __init at91_clock_associate(const char *id, struct device *dev, const char *func)
-{
- struct clk *clk = clk_get(NULL, id);
-
- if (!dev || !clk || !IS_ERR(clk_get(dev, func)))
- return;
-
- clk->function = func;
- clk->dev = dev;
-}
-
-/* clocks cannot be de-registered no refcounting necessary */
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *clk;
-
- list_for_each_entry(clk, &clocks, node) {
- if (strcmp(id, clk->name) == 0)
- return clk;
- if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0)
- return clk;
- }
-
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-static void __clk_enable(struct clk *clk)
-{
- if (clk->parent)
- __clk_enable(clk->parent);
- if (clk->users++ == 0 && clk->mode)
- clk->mode(clk, 1);
-}
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clk_lock, flags);
- __clk_enable(clk);
- spin_unlock_irqrestore(&clk_lock, flags);
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
- BUG_ON(clk->users == 0);
- if (--clk->users == 0 && clk->mode)
- clk->mode(clk, 0);
- if (clk->parent)
- __clk_disable(clk->parent);
-}
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clk_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clk_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long flags;
- unsigned long rate;
-
- spin_lock_irqsave(&clk_lock, flags);
- for (;;) {
- rate = clk->rate_hz;
- if (rate || !clk->parent)
- break;
- clk = clk->parent;
- }
- spin_unlock_irqrestore(&clk_lock, flags);
- return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*------------------------------------------------------------------------*/
-
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-
-/*
- * For now, only the programmable clocks support reparenting (MCK could
- * do this too, with care) or rate changing (the PLLs could do this too,
- * ditto MCK but that's more for cpufreq). Drivers may reparent to get
- * a better rate match; we don't.
- */
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- unsigned prescale;
- unsigned long actual;
-
- if (!clk_is_programmable(clk))
- return -EINVAL;
- spin_lock_irqsave(&clk_lock, flags);
-
- actual = clk->parent->rate_hz;
- for (prescale = 0; prescale < 7; prescale++) {
- if (actual && actual <= rate)
- break;
- actual >>= 1;
- }
-
- spin_unlock_irqrestore(&clk_lock, flags);
- return (prescale < 7) ? actual : -ENOENT;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- unsigned prescale;
- unsigned long actual;
-
- if (!clk_is_programmable(clk))
- return -EINVAL;
- if (clk->users)
- return -EBUSY;
- spin_lock_irqsave(&clk_lock, flags);
-
- actual = clk->parent->rate_hz;
- for (prescale = 0; prescale < 7; prescale++) {
- if (actual && actual <= rate) {
- u32 pckr;
-
- pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
- pckr &= AT91_PMC_CSS_PLLB; /* clock selection */
- pckr |= prescale << 2;
- at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
- clk->rate_hz = actual;
- break;
- }
- actual >>= 1;
- }
-
- spin_unlock_irqrestore(&clk_lock, flags);
- return (prescale < 7) ? actual : -ENOENT;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- unsigned long flags;
-
- if (clk->users)
- return -EBUSY;
- if (!clk_is_primary(parent) || !clk_is_programmable(clk))
- return -EINVAL;
- spin_lock_irqsave(&clk_lock, flags);
-
- clk->rate_hz = parent->rate_hz;
- clk->parent = parent;
- at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id);
-
- spin_unlock_irqrestore(&clk_lock, flags);
- return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* establish PCK0..PCK3 parentage and rate */
-static void init_programmable_clock(struct clk *clk)
-{
- struct clk *parent;
- u32 pckr;
-
- pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
- parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
- clk->parent = parent;
- clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
-}
-
-#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
-
-/*------------------------------------------------------------------------*/
-
-#ifdef CONFIG_DEBUG_FS
-
-static int at91_clk_show(struct seq_file *s, void *unused)
-{
- u32 scsr, pcsr, sr;
- struct clk *clk;
- unsigned i;
-
- seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
- seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR));
-
- seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
- seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
- seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
- seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-
- seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
- for (i = 0; i < 4; i++)
- seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
- seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
-
- seq_printf(s, "\n");
-
- list_for_each_entry(clk, &clocks, node) {
- char *state;
-
- if (clk->mode == pmc_sys_mode)
- state = (scsr & clk->pmc_mask) ? "on" : "off";
- else if (clk->mode == pmc_periph_mode)
- state = (pcsr & clk->pmc_mask) ? "on" : "off";
- else if (clk->pmc_mask)
- state = (sr & clk->pmc_mask) ? "on" : "off";
- else if (clk == &clk32k || clk == &main_clk)
- state = "on";
- else
- state = "";
-
- seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
- clk->name, clk->users, state, clk_get_rate(clk),
- clk->parent ? clk->parent->name : "");
- }
- return 0;
-}
-
-static int at91_clk_open(struct inode *inode, struct file *file)
-{
- return single_open(file, at91_clk_show, NULL);
-}
-
-static struct file_operations at91_clk_operations = {
- .open = at91_clk_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init at91_clk_debugfs_init(void)
-{
- /* /sys/kernel/debug/at91_clk */
- (void) debugfs_create_file("at91_clk", S_IFREG | S_IRUGO, NULL, NULL, &at91_clk_operations);
-
- return 0;
-}
-postcore_initcall(at91_clk_debugfs_init);
-
-#endif
-
-/*------------------------------------------------------------------------*/
-
-/* Register a new clock */
-int __init clk_register(struct clk *clk)
-{
- if (clk_is_peripheral(clk)) {
- clk->parent = &mck;
- clk->mode = pmc_periph_mode;
- list_add_tail(&clk->node, &clocks);
- }
- else if (clk_is_sys(clk)) {
- clk->parent = &mck;
- clk->mode = pmc_sys_mode;
-
- list_add_tail(&clk->node, &clocks);
- }
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
- else if (clk_is_programmable(clk)) {
- clk->mode = pmc_sys_mode;
- init_programmable_clock(clk);
- list_add_tail(&clk->node, &clocks);
- }
-#endif
-
- return 0;
-}
-
-
-/*------------------------------------------------------------------------*/
-
-static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
-{
- unsigned mul, div;
-
- div = reg & 0xff;
- mul = (reg >> 16) & 0x7ff;
- if (div && mul) {
- freq /= div;
- freq *= mul + 1;
- } else
- freq = 0;
-
- return freq;
-}
-
-static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg)
-{
- if (pll == &pllb && (reg & AT91_PMC_USB96M))
- return freq / 2;
- else
- return freq;
-}
-
-static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
-{
- unsigned i, div = 0, mul = 0, diff = 1 << 30;
- unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
-
- /* PLL output max 240 MHz (or 180 MHz per errata) */
- if (out_freq > 240000000)
- goto fail;
-
- for (i = 1; i < 256; i++) {
- int diff1;
- unsigned input, mul1;
-
- /*
- * PLL input between 1MHz and 32MHz per spec, but lower
- * frequences seem necessary in some cases so allow 100K.
- */
- input = main_freq / i;
- if (input < 100000)
- continue;
- if (input > 32000000)
- continue;
-
- mul1 = out_freq / input;
- if (mul1 > 2048)
- continue;
- if (mul1 < 2)
- goto fail;
-
- diff1 = out_freq - input * mul1;
- if (diff1 < 0)
- diff1 = -diff1;
- if (diff > diff1) {
- diff = diff1;
- div = i;
- mul = mul1;
- if (diff == 0)
- break;
- }
- }
- if (i == 256 && diff > (out_freq >> 5))
- goto fail;
- return ret | ((mul - 1) << 16) | div;
-fail:
- return 0;
-}
-
-/*
- * Several unused clocks may be active. Turn them off.
- */
-static void __init at91_periphclk_reset(void)
-{
- unsigned long reg;
- struct clk *clk;
-
- reg = at91_sys_read(AT91_PMC_PCSR);
-
- list_for_each_entry(clk, &clocks, node) {
- if (clk->mode != pmc_periph_mode)
- continue;
-
- if (clk->users > 0)
- reg &= ~clk->pmc_mask;
- }
-
- at91_sys_write(AT91_PMC_PCDR, reg);
-}
-
-static struct clk *const standard_pmc_clocks[] __initdata = {
- /* four primary clocks */
- &clk32k,
- &main_clk,
- &plla,
- &pllb,
-
- /* PLLB children (USB) */
- &udpck,
- &uhpck,
-
- /* MCK */
- &mck
-};
-
-int __init at91_clock_init(unsigned long main_clock)
-{
- unsigned tmp, freq, mckr;
- int i;
-
- /*
- * When the bootloader initialized the main oscillator correctly,
- * there's no problem using the cycle counter. But if it didn't,
- * or when using oscillator bypass mode, we must be told the speed
- * of the main clock.
- */
- if (!main_clock) {
- do {
- tmp = at91_sys_read(AT91_CKGR_MCFR);
- } while (!(tmp & AT91_PMC_MAINRDY));
- main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
- }
- main_clk.rate_hz = main_clock;
-
- /* report if PLLA is more than mildly overclocked */
- plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
- if (plla.rate_hz > 209000000)
- pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
-
- /*
- * USB clock init: choose 48 MHz PLLB value, turn all clocks off,
- * disable 48MHz clock during usb peripheral suspend.
- *
- * REVISIT: assumes MCK doesn't derive from PLLB!
- */
- at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
- pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
- if (cpu_is_at91rm9200()) {
- uhpck.pmc_mask = AT91RM9200_PMC_UHP;
- udpck.pmc_mask = AT91RM9200_PMC_UDP;
- at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
- at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260()) {
- uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
- } else if (cpu_is_at91sam9261()) {
- uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
- }
- at91_sys_write(AT91_CKGR_PLLBR, 0);
-
- udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
- uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
-
- /*
- * MCK and CPU derive from one of those primary clocks.
- * For now, assume this parentage won't change.
- */
- mckr = at91_sys_read(AT91_PMC_MCKR);
- mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
- freq = mck.parent->rate_hz;
- freq /= (1 << ((mckr >> 2) & 3)); /* prescale */
- mck.rate_hz = freq / (1 + ((mckr >> 8) & 3)); /* mdiv */
-
- /* Register the PMC's standard clocks */
- for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
- list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
-
- /* MCK and CPU clock are "always on" */
- clk_enable(&mck);
-
- printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n",
- freq / 1000000, (unsigned) mck.rate_hz / 1000000,
- (unsigned) main_clock / 1000000,
- ((unsigned) main_clock % 1000000) / 1000);
-
- /* disable all programmable clocks */
- at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
-
- /* disable all other unused peripheral clocks */
- at91_periphclk_reset();
-
- return 0;
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/clock.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define CLK_TYPE_PRIMARY 0x1
-#define CLK_TYPE_PLL 0x2
-#define CLK_TYPE_PROGRAMMABLE 0x4
-#define CLK_TYPE_PERIPHERAL 0x8
-#define CLK_TYPE_SYSTEM 0x10
-
-
-struct clk {
- struct list_head node;
- const char *name; /* unique clock name */
- const char *function; /* function of the clock */
- struct device *dev; /* device associated with function */
- unsigned long rate_hz;
- struct clk *parent;
- u32 pmc_mask;
- void (*mode)(struct clk *, int);
- unsigned id:2; /* PCK0..3, or 32k/main/a/b */
- unsigned type; /* clock type */
- u16 users;
-};
-
-
-extern int __init clk_register(struct clk *clk);
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/generic.h
- *
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
- /* Processors */
-extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
-extern void __init at91sam9260_initialize(unsigned long main_clock);
-extern void __init at91sam9261_initialize(unsigned long main_clock);
-
- /* Interrupts */
-extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
-extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
-extern void __init at91_aic_init(unsigned int priority[]);
-
- /* Timer */
-struct sys_timer;
-extern struct sys_timer at91rm9200_timer;
-extern struct sys_timer at91sam926x_timer;
-
- /* Clocks */
-extern int __init at91_clock_init(unsigned long main_clock);
-struct device;
-extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func);
-
- /* Power Management */
-extern void at91_irq_suspend(void);
-extern void at91_irq_resume(void);
-
- /* GPIO */
-#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
-#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
-
-struct at91_gpio_bank {
- unsigned short id; /* peripheral ID */
- unsigned long offset; /* offset from system peripheral base */
- struct clk *clock; /* associated clock */
-};
-extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
-extern void __init at91_gpio_irq_setup(void);
-
-extern void (*at91_arch_reset)(void);
-extern int at91_extern_irq;
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/gpio.c
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-static struct at91_gpio_bank *gpio;
-static int gpio_banks;
-
-
-static inline void __iomem *pin_to_controller(unsigned pin)
-{
- void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
-
- pin -= PIN_BASE;
- pin /= 32;
- if (likely(pin < gpio_banks))
- return sys_base + gpio[pin].offset;
-
- return NULL;
-}
-
-static inline unsigned pin_to_mask(unsigned pin)
-{
- pin -= PIN_BASE;
- return 1 << (pin % 32);
-}
-
-
-/*--------------------------------------------------------------------------*/
-
-/* Not all hardware capabilities are exposed through these calls; they
- * only encapsulate the most common features and modes. (So if you
- * want to change signals in groups, do it directly.)
- *
- * Bootloaders will usually handle some of the pin multiplexing setup.
- * The intent is certainly that by the time Linux is fully booted, all
- * pins should have been fully initialized. These setup calls should
- * only be used by board setup routines, or possibly in driver probe().
- *
- * For bootloaders doing all that setup, these calls could be inlined
- * as NOPs so Linux won't duplicate any setup code
- */
-
-
-/*
- * mux the pin to the "A" internal peripheral role.
- */
-int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
-
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- __raw_writel(mask, pio + PIO_ASR);
- __raw_writel(mask, pio + PIO_PDR);
- return 0;
-}
-EXPORT_SYMBOL(at91_set_A_periph);
-
-
-/*
- * mux the pin to the "B" internal peripheral role.
- */
-int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
-
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- __raw_writel(mask, pio + PIO_BSR);
- __raw_writel(mask, pio + PIO_PDR);
- return 0;
-}
-EXPORT_SYMBOL(at91_set_B_periph);
-
-
-/*
- * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
- * configure it for an input.
- */
-int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
-
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- __raw_writel(mask, pio + PIO_ODR);
- __raw_writel(mask, pio + PIO_PER);
- return 0;
-}
-EXPORT_SYMBOL(at91_set_gpio_input);
-
-
-/*
- * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
- * and configure it for an output.
- */
-int __init_or_module at91_set_gpio_output(unsigned pin, int value)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
-
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + PIO_PUDR);
- __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
- __raw_writel(mask, pio + PIO_OER);
- __raw_writel(mask, pio + PIO_PER);
- return 0;
-}
-EXPORT_SYMBOL(at91_set_gpio_output);
-
-
-/*
- * enable/disable the glitch filter; mostly used with IRQ handling.
- */
-int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
- __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
- return 0;
-}
-EXPORT_SYMBOL(at91_set_deglitch);
-
-/*
- * enable/disable the multi-driver; This is only valid for output and
- * allows the output pin to run as an open collector output.
- */
-int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
-
- __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
- return 0;
-}
-EXPORT_SYMBOL(at91_set_multi_drive);
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * assuming the pin is muxed as a gpio output, set its value.
- */
-int at91_set_gpio_value(unsigned pin, int value)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
- __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
- return 0;
-}
-EXPORT_SYMBOL(at91_set_gpio_value);
-
-
-/*
- * read the pin's value (works even if it's not muxed as a gpio).
- */
-int at91_get_gpio_value(unsigned pin)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
- u32 pdsr;
-
- if (!pio)
- return -EINVAL;
- pdsr = __raw_readl(pio + PIO_PDSR);
- return (pdsr & mask) != 0;
-}
-EXPORT_SYMBOL(at91_get_gpio_value);
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef CONFIG_PM
-
-static u32 wakeups[MAX_GPIO_BANKS];
-static u32 backups[MAX_GPIO_BANKS];
-
-static int gpio_irq_set_wake(unsigned pin, unsigned state)
-{
- unsigned mask = pin_to_mask(pin);
- unsigned bank = (pin - PIN_BASE) / 32;
-
- if (unlikely(bank >= MAX_GPIO_BANKS))
- return -EINVAL;
-
- if (state)
- wakeups[bank] |= mask;
- else
- wakeups[bank] &= ~mask;
-
- set_irq_wake(gpio[bank].id, state);
-
- return 0;
-}
-
-void at91_gpio_suspend(void)
-{
- int i;
-
- for (i = 0; i < gpio_banks; i++) {
- u32 pio = gpio[i].offset;
-
- backups[i] = at91_sys_read(pio + PIO_IMR);
- at91_sys_write(pio + PIO_IDR, backups[i]);
- at91_sys_write(pio + PIO_IER, wakeups[i]);
-
- if (!wakeups[i])
- clk_disable(gpio[i].clock);
- else {
-#ifdef CONFIG_PM_DEBUG
- printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
-#endif
- }
- }
-}
-
-void at91_gpio_resume(void)
-{
- int i;
-
- for (i = 0; i < gpio_banks; i++) {
- u32 pio = gpio[i].offset;
-
- if (!wakeups[i])
- clk_enable(gpio[i].clock);
-
- at91_sys_write(pio + PIO_IDR, wakeups[i]);
- at91_sys_write(pio + PIO_IER, backups[i]);
- }
-}
-
-#else
-#define gpio_irq_set_wake NULL
-#endif
-
-
-/* Several AIC controller irqs are dispatched through this GPIO handler.
- * To use any AT91_PIN_* as an externally triggered IRQ, first call
- * at91_set_gpio_input() then maybe enable its glitch filter.
- * Then just request_irq() with the pin ID; it works like any ARM IRQ
- * handler, though it always triggers on rising and falling edges.
- *
- * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
- * configuring them with at91_set_a_periph() or at91_set_b_periph().
- * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
- */
-
-static void gpio_irq_mask(unsigned pin)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (pio)
- __raw_writel(mask, pio + PIO_IDR);
-}
-
-static void gpio_irq_unmask(unsigned pin)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (pio)
- __raw_writel(mask, pio + PIO_IER);
-}
-
-static int gpio_irq_type(unsigned pin, unsigned type)
-{
- return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
-}
-
-static struct irq_chip gpio_irqchip = {
- .name = "GPIO",
- .mask = gpio_irq_mask,
- .unmask = gpio_irq_unmask,
- .set_type = gpio_irq_type,
- .set_wake = gpio_irq_set_wake,
-};
-
-static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
-{
- unsigned pin;
- struct irq_desc *gpio;
- void __iomem *pio;
- u32 isr;
-
- pio = get_irq_chip_data(irq);
-
- /* temporarily mask (level sensitive) parent IRQ */
- desc->chip->ack(irq);
- for (;;) {
- /* reading ISR acks the pending (edge triggered) GPIO interrupt */
- isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
- if (!isr)
- break;
-
- pin = (unsigned) get_irq_data(irq);
- gpio = &irq_desc[pin];
-
- while (isr) {
- if (isr & 1) {
- if (unlikely(gpio->depth)) {
- /*
- * The core ARM interrupt handler lazily disables IRQs so
- * another IRQ must be generated before it actually gets
- * here to be disabled on the GPIO controller.
- */
- gpio_irq_mask(pin);
- }
- else
- desc_handle_irq(pin, gpio);
- }
- pin++;
- gpio++;
- isr >>= 1;
- }
- }
- desc->chip->unmask(irq);
- /* now it may re-trigger */
-}
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * Called from the processor-specific init to enable GPIO interrupt support.
- */
-void __init at91_gpio_irq_setup(void)
-{
- unsigned pioc, pin;
-
- for (pioc = 0, pin = PIN_BASE;
- pioc < gpio_banks;
- pioc++) {
- void __iomem *controller;
- unsigned id = gpio[pioc].id;
- unsigned i;
-
- clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */
-
- controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset;
- __raw_writel(~0, controller + PIO_IDR);
-
- set_irq_data(id, (void *) pin);
- set_irq_chip_data(id, controller);
-
- for (i = 0; i < 32; i++, pin++) {
- /*
- * Can use the "simple" and not "edge" handler since it's
- * shorter, and the AIC handles interupts sanely.
- */
- set_irq_chip(pin, &gpio_irqchip);
- set_irq_handler(pin, handle_simple_irq);
- set_irq_flags(pin, IRQF_VALID);
- }
-
- set_irq_chained_handler(id, gpio_irq_handler);
- }
- pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks);
-}
-
-/*
- * Called from the processor-specific init to enable GPIO pin support.
- */
-void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
-{
- BUG_ON(nr_banks > MAX_GPIO_BANKS);
-
- gpio = data;
- gpio_banks = nr_banks;
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/irq.c
- *
- * Copyright (C) 2004 SAN People
- * Copyright (C) 2004 ATMEL
- * Copyright (C) Rick Bronson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/types.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-
-static void at91_aic_mask_irq(unsigned int irq)
-{
- /* Disable interrupt on AIC */
- at91_sys_write(AT91_AIC_IDCR, 1 << irq);
-}
-
-static void at91_aic_unmask_irq(unsigned int irq)
-{
- /* Enable interrupt on AIC */
- at91_sys_write(AT91_AIC_IECR, 1 << irq);
-}
-
-unsigned int at91_extern_irq;
-
-#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq)
-
-static int at91_aic_set_type(unsigned irq, unsigned type)
-{
- unsigned int smr, srctype;
-
- switch (type) {
- case IRQT_HIGH:
- srctype = AT91_AIC_SRCTYPE_HIGH;
- break;
- case IRQT_RISING:
- srctype = AT91_AIC_SRCTYPE_RISING;
- break;
- case IRQT_LOW:
- if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */
- srctype = AT91_AIC_SRCTYPE_LOW;
- else
- return -EINVAL;
- break;
- case IRQT_FALLING:
- if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */
- srctype = AT91_AIC_SRCTYPE_FALLING;
- else
- return -EINVAL;
- break;
- default:
- return -EINVAL;
- }
-
- smr = at91_sys_read(AT91_AIC_SMR(irq)) & ~AT91_AIC_SRCTYPE;
- at91_sys_write(AT91_AIC_SMR(irq), smr | srctype);
- return 0;
-}
-
-#ifdef CONFIG_PM
-
-static u32 wakeups;
-static u32 backups;
-
-static int at91_aic_set_wake(unsigned irq, unsigned value)
-{
- if (unlikely(irq >= 32))
- return -EINVAL;
-
- if (value)
- wakeups |= (1 << irq);
- else
- wakeups &= ~(1 << irq);
-
- return 0;
-}
-
-void at91_irq_suspend(void)
-{
- backups = at91_sys_read(AT91_AIC_IMR);
- at91_sys_write(AT91_AIC_IDCR, backups);
- at91_sys_write(AT91_AIC_IECR, wakeups);
-}
-
-void at91_irq_resume(void)
-{
- at91_sys_write(AT91_AIC_IDCR, wakeups);
- at91_sys_write(AT91_AIC_IECR, backups);
-}
-
-#else
-#define at91_aic_set_wake NULL
-#endif
-
-static struct irq_chip at91_aic_chip = {
- .name = "AIC",
- .ack = at91_aic_mask_irq,
- .mask = at91_aic_mask_irq,
- .unmask = at91_aic_unmask_irq,
- .set_type = at91_aic_set_type,
- .set_wake = at91_aic_set_wake,
-};
-
-/*
- * Initialize the AIC interrupt controller.
- */
-void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
-{
- unsigned int i;
-
- /*
- * The IVR is used by macro get_irqnr_and_base to read and verify.
- * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
- */
- for (i = 0; i < NR_AIC_IRQS; i++) {
- /* Put irq number in Source Vector Register: */
- at91_sys_write(AT91_AIC_SVR(i), i);
- /* Active Low interrupt, with the specified priority */
- at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
-
- set_irq_chip(i, &at91_aic_chip);
- set_irq_handler(i, handle_level_irq);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-
- /* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
- if (i < 8)
- at91_sys_write(AT91_AIC_EOICR, 0);
- }
-
- /*
- * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
- * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
- */
- at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
-
- /* No debugging in AIC: Debug (Protect) Control Register */
- at91_sys_write(AT91_AIC_DCR, 0);
-
- /* Disable and clear all interrupts initially */
- at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
- at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
-}
+++ /dev/null
-/*
- * LED driver for Atmel AT91-based boards.
- *
- * Copyright (C) SAN People (Pty) Ltd
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/mach-types.h>
-#include <asm/leds.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-
-static inline void at91_led_on(unsigned int led)
-{
- at91_set_gpio_value(led, 0);
-}
-
-static inline void at91_led_off(unsigned int led)
-{
- at91_set_gpio_value(led, 1);
-}
-
-static inline void at91_led_toggle(unsigned int led)
-{
- unsigned long is_off = at91_get_gpio_value(led);
- if (is_off)
- at91_led_on(led);
- else
- at91_led_off(led);
-}
-
-
-/*
- * Handle LED events.
- */
-static void at91_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch(evt) {
- case led_start: /* System startup */
- at91_led_on(at91_leds_cpu);
- break;
-
- case led_stop: /* System stop / suspend */
- at91_led_off(at91_leds_cpu);
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer: /* Every 50 timer ticks */
- at91_led_toggle(at91_leds_timer);
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start: /* Entering idle state */
- at91_led_off(at91_leds_cpu);
- break;
-
- case led_idle_end: /* Exit idle state */
- at91_led_on(at91_leds_cpu);
- break;
-#endif
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
-
-
-static int __init leds_init(void)
-{
- if (!at91_leds_timer || !at91_leds_cpu)
- return -ENODEV;
-
- /* Enable PIO to access the LEDs */
- at91_set_gpio_output(at91_leds_timer, 1);
- at91_set_gpio_output(at91_leds_cpu, 1);
-
- leds_event = at91_leds_event;
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(leds_init);
+++ /dev/null
-/*
- * arch/arm/mach-at91rm9200/pm.c
- * AT91 Power Management
- *
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/pm.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/pm.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91rm9200_mc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
-
-#include "generic.h"
-
-
-static int at91_pm_valid_state(suspend_state_t state)
-{
- switch (state) {
- case PM_SUSPEND_ON:
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- return 1;
-
- default:
- return 0;
- }
-}
-
-
-static suspend_state_t target_state;
-
-/*
- * Called after processes are frozen, but before we shutdown devices.
- */
-static int at91_pm_prepare(suspend_state_t state)
-{
- target_state = state;
- return 0;
-}
-
-/*
- * Verify that all the clocks are correct before entering
- * slow-clock mode.
- */
-static int at91_pm_verify_clocks(void)
-{
- unsigned long scsr;
- int i;
-
- scsr = at91_sys_read(AT91_PMC_SCSR);
-
- /* USB must not be using PLLB */
- if (cpu_is_at91rm9200()) {
- if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) {
- pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
- return 0;
- }
- } else if (cpu_is_at91sam9260()) {
-#warning "Check SAM9260 USB clocks"
- } else if (cpu_is_at91sam9261()) {
-#warning "Check SAM9261 USB clocks"
- }
-
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
- /* PCK0..PCK3 must be disabled, or configured to use clk32k */
- for (i = 0; i < 4; i++) {
- u32 css;
-
- if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
- continue;
-
- css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
- if (css != AT91_PMC_CSS_SLOW) {
- pr_debug("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
- return 0;
- }
- }
-#endif
-
- return 1;
-}
-
-/*
- * Call this from platform driver suspend() to see how deeply to suspend.
- * For example, some controllers (like OHCI) need one of the PLL clocks
- * in order to act as a wakeup source, and those are not available when
- * going into slow clock mode.
- *
- * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have
- * the very same problem (but not using at91 main_clk), and it'd be better
- * to add one generic API rather than lots of platform-specific ones.
- */
-int at91_suspend_entering_slow_clock(void)
-{
- return (target_state == PM_SUSPEND_MEM);
-}
-EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
-
-
-static void (*slow_clock)(void);
-
-
-static int at91_pm_enter(suspend_state_t state)
-{
- at91_gpio_suspend();
- at91_irq_suspend();
-
- pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
- /* remember all the always-wake irqs */
- (at91_sys_read(AT91_PMC_PCSR)
- | (1 << AT91_ID_FIQ)
- | (1 << AT91_ID_SYS)
- | (at91_extern_irq))
- & at91_sys_read(AT91_AIC_IMR),
- state);
-
- switch (state) {
- /*
- * Suspend-to-RAM is like STANDBY plus slow clock mode, so
- * drivers must suspend more deeply: only the master clock
- * controller may be using the main oscillator.
- */
- case PM_SUSPEND_MEM:
- /*
- * Ensure that clocks are in a valid state.
- */
- if (!at91_pm_verify_clocks())
- goto error;
-
- /*
- * Enter slow clock mode by switching over to clk32k and
- * turning off the main oscillator; reverse on wakeup.
- */
- if (slow_clock) {
- slow_clock();
- break;
- } else {
- /* DEVELOPMENT ONLY */
- pr_info("AT91: PM - no slow clock mode yet ...\n");
- /* FALLTHROUGH leaving master clock alone */
- }
-
- /*
- * STANDBY mode has *all* drivers suspended; ignores irqs not
- * marked as 'wakeup' event sources; and reduces DRAM power.
- * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and
- * nothing fancy done with main or cpu clocks.
- */
- case PM_SUSPEND_STANDBY:
- /*
- * NOTE: the Wait-for-Interrupt instruction needs to be
- * in icache so the SDRAM stays in self-refresh mode until
- * the wakeup IRQ occurs.
- */
- asm("b 1f; .align 5; 1:");
- asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
- at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */
- /* fall though to next state */
-
- case PM_SUSPEND_ON:
- asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
- break;
-
- default:
- pr_debug("AT91: PM - bogus suspend state %d\n", state);
- goto error;
- }
-
- pr_debug("AT91: PM - wakeup %08x\n",
- at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
-
-error:
- target_state = PM_SUSPEND_ON;
- at91_irq_resume();
- at91_gpio_resume();
- return 0;
-}
-
-
-static struct pm_ops at91_pm_ops ={
- .pm_disk_mode = 0,
- .valid = at91_pm_valid_state,
- .prepare = at91_pm_prepare,
- .enter = at91_pm_enter,
-};
-
-static int __init at91_pm_init(void)
-{
- printk("AT91: Power Management\n");
-
-#ifdef CONFIG_AT91_PM_SLOW_CLOCK
- /* REVISIT allocations of SRAM should be dynamically managed.
- * FIQ handlers and other components will want SRAM/TCM too...
- */
- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
- memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
-#endif
-
- /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
- at91_sys_write(AT91_SDRAMC_LPR, 0);
-
- pm_set_ops(&at91_pm_ops);
-
- return 0;
-}
-arch_initcall(at91_pm_init);
*
* Copyright (C) 2006 Atmel Corporation
*
- * Based on arch/arm/mach-at91rm9200/clock.c
+ * Based on arch/arm/mach-at91/clock.c
* Copyright (C) 2005 David Brownell
* Copyright (C) 2005 Ivan Kokshaysky
*
*
* Copyright (C) 2006 Atmel Corporation
*
- * Based on arch/arm/mach-at91rm9200/clock.c
+ * Based on arch/arm/mach-at91/clock.c
* Copyright (C) 2005 David Brownell
* Copyright (C) 2005 Ivan Kokshaysky
*
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_aic.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Advanced Interrupt Controller (AIC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_AIC_H
+#define AT91_AIC_H
+
+#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */
+#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
+#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
+#define AT91_AIC_SRCTYPE_LOW (0 << 5)
+#define AT91_AIC_SRCTYPE_FALLING (1 << 5)
+#define AT91_AIC_SRCTYPE_HIGH (2 << 5)
+#define AT91_AIC_SRCTYPE_RISING (3 << 5)
+
+#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */
+#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */
+#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
+
+#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */
+#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */
+#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */
+#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
+#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
+
+#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */
+#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */
+#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */
+#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
+#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
+
+#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_dbgu.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Debug Unit (DBGU) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_DBGU_H
+#define AT91_DBGU_H
+
+#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */
+#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */
+#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */
+#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
+#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
+#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */
+#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */
+#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */
+#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */
+#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */
+#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */
+
+#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */
+#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */
+#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */
+#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */
+#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
+#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
+#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
+#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
+#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
+#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
+
+#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */
+#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_ecc.h
+ *
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef AT91_ECC_H
+#define AT91_ECC_H
+
+#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */
+#define AT91_ECC_RST (1 << 0) /* Reset parity */
+
+#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */
+#define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */
+#define AT91_ECC_PAGESIZE_528 (0)
+#define AT91_ECC_PAGESIZE_1056 (1)
+#define AT91_ECC_PAGESIZE_2112 (2)
+#define AT91_ECC_PAGESIZE_4224 (3)
+
+#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */
+#define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */
+#define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
+#define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */
+
+#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */
+#define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */
+#define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
+
+#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */
+#define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_lcdc.h
+ *
+ * LCD Controller (LCDC).
+ * Based on AT91SAM9261 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_LCDC_H
+#define AT91_LCDC_H
+
+#define AT91_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */
+#define AT91_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */
+#define AT91_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */
+#define AT91_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */
+#define AT91_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */
+#define AT91_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */
+
+#define AT91_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */
+#define AT91_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */
+#define AT91_LCDC_BLENGTH (0x7f << 24) /* Burst Length */
+
+#define AT91_LCDC_DMACON 0x1c /* DMA Control Register */
+#define AT91_LCDC_DMAEN (0x1 << 0) /* DMA Enable */
+#define AT91_LCDC_DMARST (0x1 << 1) /* DMA Reset */
+#define AT91_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */
+
+#define AT91_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */
+#define AT91_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */
+#define AT91_LCDC_CLKVAL (0x1ff << 12) /* Clock Divider */
+#define AT91_LCDC_LINCNT (0x7ff << 21) /* Line Counter */
+
+#define AT91_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */
+#define AT91_LCDC_DISTYPE (3 << 0) /* Display Type */
+#define AT91_LCDC_DISTYPE_STNMONO (0 << 0)
+#define AT91_LCDC_DISTYPE_STNCOLOR (1 << 0)
+#define AT91_LCDC_DISTYPE_TFT (2 << 0)
+#define AT91_LCDC_SCANMOD (1 << 2) /* Scan Mode */
+#define AT91_LCDC_SCANMOD_SINGLE (0 << 2)
+#define AT91_LCDC_SCANMOD_DUAL (1 << 2)
+#define AT91_LCDC_IFWIDTH (3 << 3) /*Interface Width */
+#define AT91_LCDC_IFWIDTH_4 (0 << 3)
+#define AT91_LCDC_IFWIDTH_8 (1 << 3)
+#define AT91_LCDC_IFWIDTH_16 (2 << 3)
+#define AT91_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */
+#define AT91_LCDC_PIXELSIZE_1 (0 << 5)
+#define AT91_LCDC_PIXELSIZE_2 (1 << 5)
+#define AT91_LCDC_PIXELSIZE_4 (2 << 5)
+#define AT91_LCDC_PIXELSIZE_8 (3 << 5)
+#define AT91_LCDC_PIXELSIZE_16 (4 << 5)
+#define AT91_LCDC_PIXELSIZE_24 (5 << 5)
+#define AT91_LCDC_INVVD (1 << 8) /* LCD Data polarity */
+#define AT91_LCDC_INVVD_NORMAL (0 << 8)
+#define AT91_LCDC_INVVD_INVERTED (1 << 8)
+#define AT91_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */
+#define AT91_LCDC_INVFRAME_NORMAL (0 << 9)
+#define AT91_LCDC_INVFRAME_INVERTED (1 << 9)
+#define AT91_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */
+#define AT91_LCDC_INVLINE_NORMAL (0 << 10)
+#define AT91_LCDC_INVLINE_INVERTED (1 << 10)
+#define AT91_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */
+#define AT91_LCDC_INVCLK_NORMAL (0 << 11)
+#define AT91_LCDC_INVCLK_INVERTED (1 << 11)
+#define AT91_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */
+#define AT91_LCDC_INVDVAL_NORMAL (0 << 12)
+#define AT91_LCDC_INVDVAL_INVERTED (1 << 12)
+#define AT91_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */
+#define AT91_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
+#define AT91_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
+#define AT91_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */
+#define AT91_LCDC_MEMOR_BIG (0 << 31)
+#define AT91_LCDC_MEMOR_LITTLE (1 << 31)
+
+#define AT91_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */
+#define AT91_LCDC_VFP (0xff << 0) /* Vertical Front Porch */
+#define AT91_LCDC_VBP (0xff << 8) /* Vertical Back Porch */
+#define AT91_LCDC_VPW (0x3f << 16) /* Vertical Synchronization Pulse Width */
+#define AT91_LCDC_VHDLY (0xf << 24) /* Vertical to Horizontal Delay */
+
+#define AT91_LCDC_TIM2 0x080c /* LCD Timing Register 2 */
+#define AT91_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */
+#define AT91_LCDC_HPW (0x3f << 8) /* Horizontal Synchronization Pulse Width */
+#define AT91_LCDC_HFP (0x7ff << 21) /* Horizontal Front Porch */
+
+#define AT91_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */
+#define AT91_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */
+#define AT91_LCDC_HOZVAL (0x7ff << 21) /* Horizontal Size of LCD Module */
+
+#define AT91_LCDC_FIFO 0x0814 /* LCD FIFO Register */
+#define AT91_LCDC_FIFOTH (0xffff) /* FIFO Threshold */
+
+#define AT91_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */
+#define AT91_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */
+#define AT91_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */
+#define AT91_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */
+#define AT91_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */
+#define AT91_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */
+#define AT91_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */
+#define AT91_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */
+#define AT91_LCDC_DP1_2_VAL (0xff)
+#define AT91_LCDC_DP4_7_VAL (0xfffffff)
+#define AT91_LCDC_DP3_5_VAL (0xfffff)
+#define AT91_LCDC_DP2_3_VAL (0xfff)
+#define AT91_LCDC_DP5_7_VAL (0xfffffff)
+#define AT91_LCDC_DP3_4_VAL (0xffff)
+#define AT91_LCDC_DP4_5_VAL (0xfffff)
+#define AT91_LCDC_DP6_7_VAL (0xfffffff)
+
+#define AT91_LCDC_PWRCON 0x083c /* Power Control Register */
+#define AT91_LCDC_PWR (1 << 0) /* LCD Module Power Control */
+#define AT91_LCDC_GUARDT (0x7f << 1) /* Delay in Frame Period */
+#define AT91_LCDC_BUSY (1 << 31) /* LCD Busy */
+
+#define AT91_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */
+#define AT91_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */
+#define AT91_LCDC_PS_DIV1 (0 << 0)
+#define AT91_LCDC_PS_DIV2 (1 << 0)
+#define AT91_LCDC_PS_DIV4 (2 << 0)
+#define AT91_LCDC_PS_DIV8 (3 << 0)
+#define AT91_LCDC_POL (1 << 2) /* Polarity of output Pulse */
+#define AT91_LCDC_POL_NEGATIVE (0 << 2)
+#define AT91_LCDC_POL_POSITIVE (1 << 2)
+#define AT91_LCDC_ENA (1 << 3) /* PWM generator Control */
+#define AT91_LCDC_ENA_PWMDISABLE (0 << 3)
+#define AT91_LCDC_ENA_PWMENABLE (1 << 3)
+
+#define AT91_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */
+#define AT91_LCDC_CVAL (0xff) /* PWM compare value */
+
+#define AT91_LCDC_IER 0x0848 /* Interrupt Enable Register */
+#define AT91_LCDC_IDR 0x084c /* Interrupt Disable Register */
+#define AT91_LCDC_IMR 0x0850 /* Interrupt Mask Register */
+#define AT91_LCDC_ISR 0x0854 /* Interrupt Enable Register */
+#define AT91_LCDC_ICR 0x0858 /* Interrupt Clear Register */
+#define AT91_LCDC_LNI (1 << 0) /* Line Interrupt */
+#define AT91_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */
+#define AT91_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */
+#define AT91_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */
+#define AT91_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */
+#define AT91_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */
+
+#define AT91_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_mci.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * MultiMedia Card Interface (MCI) registers.
+ * Based on AT91RM9200 datasheet revision F.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_MCI_H
+#define AT91_MCI_H
+
+#define AT91_MCI_CR 0x00 /* Control Register */
+#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */
+#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */
+#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */
+#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */
+#define AT91_MCI_SWRST (1 << 7) /* Software Reset */
+
+#define AT91_MCI_MR 0x04 /* Mode Register */
+#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
+#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
+#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
+#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
+#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
+
+#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */
+#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */
+#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */
+#define AT91_MCI_DTOMUL_1 (0 << 4)
+#define AT91_MCI_DTOMUL_16 (1 << 4)
+#define AT91_MCI_DTOMUL_128 (2 << 4)
+#define AT91_MCI_DTOMUL_256 (3 << 4)
+#define AT91_MCI_DTOMUL_1K (4 << 4)
+#define AT91_MCI_DTOMUL_4K (5 << 4)
+#define AT91_MCI_DTOMUL_64K (6 << 4)
+#define AT91_MCI_DTOMUL_1M (7 << 4)
+
+#define AT91_MCI_SDCR 0x0c /* SD Card Register */
+#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */
+#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */
+
+#define AT91_MCI_ARGR 0x10 /* Argument Register */
+
+#define AT91_MCI_CMDR 0x14 /* Command Register */
+#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */
+#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */
+#define AT91_MCI_RSPTYP_NONE (0 << 6)
+#define AT91_MCI_RSPTYP_48 (1 << 6)
+#define AT91_MCI_RSPTYP_136 (2 << 6)
+#define AT91_MCI_SPCMD (7 << 8) /* Special Command */
+#define AT91_MCI_SPCMD_NONE (0 << 8)
+#define AT91_MCI_SPCMD_INIT (1 << 8)
+#define AT91_MCI_SPCMD_SYNC (2 << 8)
+#define AT91_MCI_SPCMD_ICMD (4 << 8)
+#define AT91_MCI_SPCMD_IRESP (5 << 8)
+#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */
+#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */
+#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */
+#define AT91_MCI_TRCMD_NONE (0 << 16)
+#define AT91_MCI_TRCMD_START (1 << 16)
+#define AT91_MCI_TRCMD_STOP (2 << 16)
+#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */
+#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */
+#define AT91_MCI_TRTYP_BLOCK (0 << 19)
+#define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
+#define AT91_MCI_TRTYP_STREAM (2 << 19)
+
+#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */
+#define AT91_MCR_RDR 0x30 /* Receive Data Register */
+#define AT91_MCR_TDR 0x34 /* Transmit Data Register */
+
+#define AT91_MCI_SR 0x40 /* Status Register */
+#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */
+#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */
+#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */
+#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */
+#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */
+#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */
+#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
+#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
+#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */
+#define At91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B [AT91RM9200 only] */
+#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
+#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
+#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
+#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */
+#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */
+#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */
+#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */
+#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */
+#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */
+#define AT91_MCI_OVRE (1 << 30) /* Overrun */
+#define AT91_MCI_UNRE (1 << 31) /* Underrun */
+
+#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */
+#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */
+#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_pdc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Peripheral Data Controller (PDC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PDC_H
+#define AT91_PDC_H
+
+#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
+#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
+#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
+#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
+#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
+#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
+#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
+#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
+
+#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
+#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
+#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
+#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
+#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
+
+#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_pio.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIO_H
+#define AT91_PIO_H
+
+#define PIO_PER 0x00 /* Enable Register */
+#define PIO_PDR 0x04 /* Disable Register */
+#define PIO_PSR 0x08 /* Status Register */
+#define PIO_OER 0x10 /* Output Enable Register */
+#define PIO_ODR 0x14 /* Output Disable Register */
+#define PIO_OSR 0x18 /* Output Status Register */
+#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
+#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
+#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
+#define PIO_SODR 0x30 /* Set Output Data Register */
+#define PIO_CODR 0x34 /* Clear Output Data Register */
+#define PIO_ODSR 0x38 /* Output Data Status Register */
+#define PIO_PDSR 0x3c /* Pin Data Status Register */
+#define PIO_IER 0x40 /* Interrupt Enable Register */
+#define PIO_IDR 0x44 /* Interrupt Disable Register */
+#define PIO_IMR 0x48 /* Interrupt Mask Register */
+#define PIO_ISR 0x4c /* Interrupt Status Register */
+#define PIO_MDER 0x50 /* Multi-driver Enable Register */
+#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
+#define PIO_MDSR 0x58 /* Multi-driver Status Register */
+#define PIO_PUDR 0x60 /* Pull-up Disable Register */
+#define PIO_PUER 0x64 /* Pull-up Enable Register */
+#define PIO_PUSR 0x68 /* Pull-up Status Register */
+#define PIO_ASR 0x70 /* Peripheral A Select Register */
+#define PIO_BSR 0x74 /* Peripheral B Select Register */
+#define PIO_ABSR 0x78 /* AB Status Register */
+#define PIO_OWER 0xa0 /* Output Write Enable Register */
+#define PIO_OWDR 0xa4 /* Output Write Disable Register */
+#define PIO_OWSR 0xa8 /* Output Write Status Register */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_pit.h
+ *
+ * Periodic Interval Timer (PIT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIT_H
+#define AT91_PIT_H
+
+#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */
+#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
+#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
+#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
+
+#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */
+#define AT91_PIT_PITS (1 << 0) /* Timer Status */
+
+#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */
+#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */
+#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
+#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_pmc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
+#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
+
+#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
+#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
+#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
+#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
+#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
+#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
+#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
+#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
+#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
+#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
+#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
+#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
+#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
+
+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
+#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
+#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
+
+#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
+#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
+#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
+
+#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
+#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
+#define AT91_PMC_DIV (0xff << 0) /* Divider */
+#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
+#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
+#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
+#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
+
+#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
+#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
+#define AT91_PMC_CSS_SLOW (0 << 0)
+#define AT91_PMC_CSS_MAIN (1 << 0)
+#define AT91_PMC_CSS_PLLA (2 << 0)
+#define AT91_PMC_CSS_PLLB (3 << 0)
+#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
+#define AT91_PMC_PRES_1 (0 << 2)
+#define AT91_PMC_PRES_2 (1 << 2)
+#define AT91_PMC_PRES_4 (2 << 2)
+#define AT91_PMC_PRES_8 (3 << 2)
+#define AT91_PMC_PRES_16 (4 << 2)
+#define AT91_PMC_PRES_32 (5 << 2)
+#define AT91_PMC_PRES_64 (6 << 2)
+#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
+#define AT91_PMC_MDIV_1 (0 << 8)
+#define AT91_PMC_MDIV_2 (1 << 8)
+#define AT91_PMC_MDIV_3 (2 << 8)
+#define AT91_PMC_MDIV_4 (3 << 8)
+
+#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
+
+#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
+#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
+#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
+#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
+#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
+#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
+#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
+#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
+#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
+#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
+#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
+#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_rstc.h
+ *
+ * Reset Controller (RSTC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RSTC_H
+#define AT91_RSTC_H
+
+#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */
+#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
+#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
+#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
+#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
+
+#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
+#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
+#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */
+#define AT91_RSTC_RSTTYP_GENERAL (0 << 8)
+#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8)
+#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8)
+#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8)
+#define AT91_RSTC_RSTTYP_USER (4 << 8)
+#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */
+#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */
+#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
+#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
+#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
+#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_rtc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Real Time Clock (RTC) - System peripheral registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTC_H
+#define AT91_RTC_H
+
+#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */
+#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */
+#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */
+#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */
+#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8)
+#define AT91_RTC_TIMEVSEL_HOUR (1 << 8)
+#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8)
+#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8)
+#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */
+#define AT91_RTC_CALEVSEL_WEEK (0 << 16)
+#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
+#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
+
+#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */
+#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
+
+#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */
+#define AT91_RTC_SEC (0x7f << 0) /* Current Second */
+#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */
+#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
+#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */
+
+#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */
+#define AT91_RTC_CENT (0x7f << 0) /* Current Century */
+#define AT91_RTC_YEAR (0xff << 8) /* Current Year */
+#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */
+#define AT91_RTC_DAY (7 << 21) /* Current Day */
+#define AT91_RTC_DATE (0x3f << 24) /* Current Date */
+
+#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */
+#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */
+#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */
+#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */
+
+#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */
+#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */
+#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */
+
+#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */
+#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */
+#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */
+#define AT91_RTC_SECEV (1 << 2) /* Second Event */
+#define AT91_RTC_TIMEV (1 << 3) /* Time Event */
+#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */
+
+#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */
+#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */
+#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */
+#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */
+
+#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */
+#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
+#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */
+#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */
+#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_rtt.h
+ *
+ * Real-time Timer (RTT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTT_H
+#define AT91_RTT_H
+
+#define AT91_RTT_MR (AT91_RTT + 0x00) /* Real-time Mode Register */
+#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
+#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
+#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
+#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
+
+#define AT91_RTT_AR (AT91_RTT + 0x04) /* Real-time Alarm Register */
+#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
+
+#define AT91_RTT_VR (AT91_RTT + 0x08) /* Real-time Value Register */
+#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
+
+#define AT91_RTT_SR (AT91_RTT + 0x0c) /* Real-time Status Register */
+#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
+#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_shdwc.h
+ *
+ * Shutdown Controller (SHDWC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SHDWC_H
+#define AT91_SHDWC_H
+
+#define AT91_SHDW_CR (AT91_SHDWC + 0x00) /* Shut Down Control Register */
+#define AT91_SHDW_SHDW (1 << 0) /* Processor Reset */
+#define AT91_SHDW_KEY (0xff << 24) /* KEY Password */
+
+#define AT91_SHDW_MR (AT91_SHDWC + 0x04) /* Shut Down Mode Register */
+#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */
+#define AT91_SHDW_WKMODE0_NONE 0
+#define AT91_SHDW_WKMODE0_HIGH 1
+#define AT91_SHDW_WKMODE0_LOW 2
+#define AT91_SHDW_WKMODE0_ANYLEVEL 3
+#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */
+#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
+
+#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */
+#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
+#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_spi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SPI_H
+#define AT91_SPI_H
+
+#define AT91_SPI_CR 0x00 /* Control Register */
+#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */
+#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */
+#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */
+#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR 0x04 /* Mode Register */
+#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */
+#define AT91_SPI_PS (1 << 1) /* Peripheral Select */
+#define AT91_SPI_PS_FIXED (0 << 1)
+#define AT91_SPI_PS_VARIABLE (1 << 1)
+#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */
+#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */
+#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */
+#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */
+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
+#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR 0x08 /* Receive Data Register */
+#define AT91_SPI_RD (0xffff << 0) /* Receive Data */
+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
+
+#define AT91_SPI_TDR 0x0c /* Transmit Data Register */
+#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */
+#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
+#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR 0x10 /* Status Register */
+#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */
+#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */
+#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */
+#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */
+#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */
+#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */
+#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */
+#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */
+#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */
+#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */
+#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */
+
+#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */
+#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */
+#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */
+#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */
+#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */
+#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */
+#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */
+#define AT91_SPI_BITS_8 (0 << 4)
+#define AT91_SPI_BITS_9 (1 << 4)
+#define AT91_SPI_BITS_10 (2 << 4)
+#define AT91_SPI_BITS_11 (3 << 4)
+#define AT91_SPI_BITS_12 (4 << 4)
+#define AT91_SPI_BITS_13 (5 << 4)
+#define AT91_SPI_BITS_14 (6 << 4)
+#define AT91_SPI_BITS_15 (7 << 4)
+#define AT91_SPI_BITS_16 (8 << 4)
+#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */
+#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */
+#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_ssc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Serial Synchronous Controller (SSC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SSC_H
+#define AT91_SSC_H
+
+#define AT91_SSC_CR 0x00 /* Control Register */
+#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */
+#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */
+#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */
+#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */
+#define AT91_SSC_SWRST (1 << 15) /* Software Reset */
+
+#define AT91_SSC_CMR 0x04 /* Clock Mode Register */
+#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */
+
+#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */
+#define AT91_SSC_CKS (3 << 0) /* Clock Selection */
+#define AT91_SSC_CKS_DIV (0 << 0)
+#define AT91_SSC_CKS_CLOCK (1 << 0)
+#define AT91_SSC_CKS_PIN (2 << 0)
+#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */
+#define AT91_SSC_CKO_NONE (0 << 2)
+#define AT91_SSC_CKO_CONTINUOUS (1 << 2)
+#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */
+#define AT91_SSC_CKI_FALLING (0 << 5)
+#define AT91_SSC_CK_RISING (1 << 5)
+#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */
+#define AT91_SSC_CKG_NONE (0 << 6)
+#define AT91_SSC_CKG_RFLOW (1 << 6)
+#define AT91_SSC_CKG_RFHIGH (2 << 6)
+#define AT91_SSC_START (0xf << 8) /* Start Selection */
+#define AT91_SSC_START_CONTINUOUS (0 << 8)
+#define AT91_SSC_START_TX_RX (1 << 8)
+#define AT91_SSC_START_LOW_RF (2 << 8)
+#define AT91_SSC_START_HIGH_RF (3 << 8)
+#define AT91_SSC_START_FALLING_RF (4 << 8)
+#define AT91_SSC_START_RISING_RF (5 << 8)
+#define AT91_SSC_START_LEVEL_RF (6 << 8)
+#define AT91_SSC_START_EDGE_RF (7 << 8)
+#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */
+#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */
+#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */
+
+#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */
+#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */
+#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */
+#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */
+#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */
+#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */
+#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */
+#define AT91_SSC_FSOS_NONE (0 << 20)
+#define AT91_SSC_FSOS_NEGATIVE (1 << 20)
+#define AT91_SSC_FSOS_POSITIVE (2 << 20)
+#define AT91_SSC_FSOS_LOW (3 << 20)
+#define AT91_SSC_FSOS_HIGH (4 << 20)
+#define AT91_SSC_FSOS_TOGGLE (5 << 20)
+#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */
+#define AT91_SSC_FSEDGE_POSITIVE (0 << 24)
+#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24)
+
+#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */
+#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */
+#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */
+#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */
+
+#define AT91_SSC_RHR 0x20 /* Receive Holding Register */
+#define AT91_SSC_THR 0x24 /* Transmit Holding Register */
+#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */
+#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */
+
+#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */
+#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */
+
+#define AT91_SSC_SR 0x40 /* Status Register */
+#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */
+#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */
+#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */
+#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */
+#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */
+#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */
+#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */
+#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */
+#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */
+#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */
+#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */
+#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */
+#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */
+#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */
+
+#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */
+#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */
+#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_st.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * System Timer (ST) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ST_H
+#define AT91_ST_H
+
+#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */
+#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */
+
+#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */
+#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */
+
+#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */
+#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */
+#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */
+#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */
+
+#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */
+#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */
+
+#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */
+#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */
+#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */
+#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */
+#define AT91_ST_ALMS (1 << 3) /* Alarm Status */
+
+#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */
+#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */
+#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */
+
+#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */
+#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */
+
+#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */
+#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_tc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Timer/Counter Unit (TC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TC_H
+#define AT91_TC_H
+
+#define AT91_TC_BCR 0xc0 /* TC Block Control Register */
+#define AT91_TC_SYNC (1 << 0) /* Synchro Command */
+
+#define AT91_TC_BMR 0xc4 /* TC Block Mode Register */
+#define AT91_TC_TC0XC0S (3 << 0) /* External Clock Signal 0 Selection */
+#define AT91_TC_TC0XC0S_TCLK0 (0 << 0)
+#define AT91_TC_TC0XC0S_NONE (1 << 0)
+#define AT91_TC_TC0XC0S_TIOA1 (2 << 0)
+#define AT91_TC_TC0XC0S_TIOA2 (3 << 0)
+#define AT91_TC_TC1XC1S (3 << 2) /* External Clock Signal 1 Selection */
+#define AT91_TC_TC1XC1S_TCLK1 (0 << 2)
+#define AT91_TC_TC1XC1S_NONE (1 << 2)
+#define AT91_TC_TC1XC1S_TIOA0 (2 << 2)
+#define AT91_TC_TC1XC1S_TIOA2 (3 << 2)
+#define AT91_TC_TC2XC2S (3 << 4) /* External Clock Signal 2 Selection */
+#define AT91_TC_TC2XC2S_TCLK2 (0 << 4)
+#define AT91_TC_TC2XC2S_NONE (1 << 4)
+#define AT91_TC_TC2XC2S_TIOA0 (2 << 4)
+#define AT91_TC_TC2XC2S_TIOA1 (3 << 4)
+
+
+#define AT91_TC_CCR 0x00 /* Channel Control Register */
+#define AT91_TC_CLKEN (1 << 0) /* Counter Clock Enable Command */
+#define AT91_TC_CLKDIS (1 << 1) /* Counter CLock Disable Command */
+#define AT91_TC_SWTRG (1 << 2) /* Software Trigger Command */
+
+#define AT91_TC_CMR 0x04 /* Channel Mode Register */
+#define AT91_TC_TCCLKS (7 << 0) /* Capture/Waveform Mode: Clock Selection */
+#define AT91_TC_TIMER_CLOCK1 (0 << 0)
+#define AT91_TC_TIMER_CLOCK2 (1 << 0)
+#define AT91_TC_TIMER_CLOCK3 (2 << 0)
+#define AT91_TC_TIMER_CLOCK4 (3 << 0)
+#define AT91_TC_TIMER_CLOCK5 (4 << 0)
+#define AT91_TC_XC0 (5 << 0)
+#define AT91_TC_XC1 (6 << 0)
+#define AT91_TC_XC2 (7 << 0)
+#define AT91_TC_CLKI (1 << 3) /* Capture/Waveform Mode: Clock Invert */
+#define AT91_TC_BURST (3 << 4) /* Capture/Waveform Mode: Burst Signal Selection */
+#define AT91_TC_LDBSTOP (1 << 6) /* Capture Mode: Counter Clock Stopped with TB Loading */
+#define AT91_TC_LDBDIS (1 << 7) /* Capture Mode: Counter Clock Disable with RB Loading */
+#define AT91_TC_ETRGEDG (3 << 8) /* Capture Mode: External Trigger Edge Selection */
+#define AT91_TC_ABETRG (1 << 10) /* Capture Mode: TIOA or TIOB External Trigger Selection */
+#define AT91_TC_CPCTRG (1 << 14) /* Capture Mode: RC Compare Trigger Enable */
+#define AT91_TC_WAVE (1 << 15) /* Capture/Waveform mode */
+#define AT91_TC_LDRA (3 << 16) /* Capture Mode: RA Loading Selection */
+#define AT91_TC_LDRB (3 << 18) /* Capture Mode: RB Loading Selection */
+
+#define AT91_TC_CPCSTOP (1 << 6) /* Waveform Mode: Counter Clock Stopped with RC Compare */
+#define AT91_TC_CPCDIS (1 << 7) /* Waveform Mode: Counter Clock Disable with RC Compare */
+#define AT91_TC_EEVTEDG (3 << 8) /* Waveform Mode: External Event Edge Selection */
+#define AT91_TC_EEVTEDG_NONE (0 << 8)
+#define AT91_TC_EEVTEDG_RISING (1 << 8)
+#define AT91_TC_EEVTEDG_FALLING (2 << 8)
+#define AT91_TC_EEVTEDG_BOTH (3 << 8)
+#define AT91_TC_EEVT (3 << 10) /* Waveform Mode: External Event Selection */
+#define AT91_TC_EEVT_TIOB (0 << 10)
+#define AT91_TC_EEVT_XC0 (1 << 10)
+#define AT91_TC_EEVT_XC1 (2 << 10)
+#define AT91_TC_EEVT_XC2 (3 << 10)
+#define AT91_TC_ENETRG (1 << 12) /* Waveform Mode: External Event Trigger Enable */
+#define AT91_TC_WAVESEL (3 << 13) /* Waveform Mode: Waveform Selection */
+#define AT91_TC_WAVESEL_UP (0 << 13)
+#define AT91_TC_WAVESEL_UP_AUTO (2 << 13)
+#define AT91_TC_WAVESEL_UPDOWN (1 << 13)
+#define AT91_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
+#define AT91_TC_ACPA (3 << 16) /* Waveform Mode: RA Compare Effect on TIOA */
+#define AT91_TC_ACPA_NONE (0 << 16)
+#define AT91_TC_ACPA_SET (1 << 16)
+#define AT91_TC_ACPA_CLEAR (2 << 16)
+#define AT91_TC_ACPA_TOGGLE (3 << 16)
+#define AT91_TC_ACPC (3 << 18) /* Waveform Mode: RC Compre Effect on TIOA */
+#define AT91_TC_ACPC_NONE (0 << 18)
+#define AT91_TC_ACPC_SET (1 << 18)
+#define AT91_TC_ACPC_CLEAR (2 << 18)
+#define AT91_TC_ACPC_TOGGLE (3 << 18)
+#define AT91_TC_AEEVT (3 << 20) /* Waveform Mode: External Event Effect on TIOA */
+#define AT91_TC_AEEVT_NONE (0 << 20)
+#define AT91_TC_AEEVT_SET (1 << 20)
+#define AT91_TC_AEEVT_CLEAR (2 << 20)
+#define AT91_TC_AEEVT_TOGGLE (3 << 20)
+#define AT91_TC_ASWTRG (3 << 22) /* Waveform Mode: Software Trigger Effect on TIOA */
+#define AT91_TC_ASWTRG_NONE (0 << 22)
+#define AT91_TC_ASWTRG_SET (1 << 22)
+#define AT91_TC_ASWTRG_CLEAR (2 << 22)
+#define AT91_TC_ASWTRG_TOGGLE (3 << 22)
+#define AT91_TC_BCPB (3 << 24) /* Waveform Mode: RB Compare Effect on TIOB */
+#define AT91_TC_BCPB_NONE (0 << 24)
+#define AT91_TC_BCPB_SET (1 << 24)
+#define AT91_TC_BCPB_CLEAR (2 << 24)
+#define AT91_TC_BCPB_TOGGLE (3 << 24)
+#define AT91_TC_BCPC (3 << 26) /* Waveform Mode: RC Compare Effect on TIOB */
+#define AT91_TC_BCPC_NONE (0 << 26)
+#define AT91_TC_BCPC_SET (1 << 26)
+#define AT91_TC_BCPC_CLEAR (2 << 26)
+#define AT91_TC_BCPC_TOGGLE (3 << 26)
+#define AT91_TC_BEEVT (3 << 28) /* Waveform Mode: External Event Effect on TIOB */
+#define AT91_TC_BEEVT_NONE (0 << 28)
+#define AT91_TC_BEEVT_SET (1 << 28)
+#define AT91_TC_BEEVT_CLEAR (2 << 28)
+#define AT91_TC_BEEVT_TOGGLE (3 << 28)
+#define AT91_TC_BSWTRG (3 << 30) /* Waveform Mode: Software Trigger Effect on TIOB */
+#define AT91_TC_BSWTRG_NONE (0 << 30)
+#define AT91_TC_BSWTRG_SET (1 << 30)
+#define AT91_TC_BSWTRG_CLEAR (2 << 30)
+#define AT91_TC_BSWTRG_TOGGLE (3 << 30)
+
+#define AT91_TC_CV 0x10 /* Counter Value */
+#define AT91_TC_RA 0x14 /* Register A */
+#define AT91_TC_RB 0x18 /* Register B */
+#define AT91_TC_RC 0x1c /* Register C */
+
+#define AT91_TC_SR 0x20 /* Status Register */
+#define AT91_TC_COVFS (1 << 0) /* Counter Overflow Status */
+#define AT91_TC_LOVRS (1 << 1) /* Load Overrun Status */
+#define AT91_TC_CPAS (1 << 2) /* RA Compare Status */
+#define AT91_TC_CPBS (1 << 3) /* RB Compare Status */
+#define AT91_TC_CPCS (1 << 4) /* RC Compare Status */
+#define AT91_TC_LDRAS (1 << 5) /* RA Loading Status */
+#define AT91_TC_LDRBS (1 << 6) /* RB Loading Status */
+#define AT91_TC_ETRGS (1 << 7) /* External Trigger Status */
+#define AT91_TC_CLKSTA (1 << 16) /* Clock Enabling Status */
+#define AT91_TC_MTIOA (1 << 17) /* TIOA Mirror */
+#define AT91_TC_MTIOB (1 << 18) /* TIOB Mirror */
+
+#define AT91_TC_IER 0x24 /* Interrupt Enable Register */
+#define AT91_TC_IDR 0x28 /* Interrupt Disable Register */
+#define AT91_TC_IMR 0x2c /* Interrupt Mask Register */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_twi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Two-wire Interface (TWI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TWI_H
+#define AT91_TWI_H
+
+#define AT91_TWI_CR 0x00 /* Control Register */
+#define AT91_TWI_START (1 << 0) /* Send a Start Condition */
+#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */
+#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */
+#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */
+#define AT91_TWI_SWRST (1 << 7) /* Software Reset */
+
+#define AT91_TWI_MMR 0x04 /* Master Mode Register */
+#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */
+#define AT91_TWI_IADRSZ_NO (0 << 8)
+#define AT91_TWI_IADRSZ_1 (1 << 8)
+#define AT91_TWI_IADRSZ_2 (2 << 8)
+#define AT91_TWI_IADRSZ_3 (3 << 8)
+#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */
+#define AT91_TWI_DADR (0x7f << 16) /* Device Address */
+
+#define AT91_TWI_IADR 0x0c /* Internal Address Register */
+
+#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */
+#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */
+#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */
+#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */
+
+#define AT91_TWI_SR 0x20 /* Status Register */
+#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */
+#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */
+#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */
+#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */
+#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */
+#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */
+
+#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */
+#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */
+#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */
+#define AT91_TWI_RHR 0x30 /* Receive Holding Register */
+#define AT91_TWI_THR 0x34 /* Transmit Holding Register */
+
+#endif
+
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91_wdt.h
+ *
+ * Watchdog Timer (WDT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_WDT_H
+#define AT91_WDT_H
+
+#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */
+#define AT91_WDT_WDRSTT (1 << 0) /* Restart */
+#define AT91_WDT_KEY (0xff << 24) /* KEY Password */
+
+#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */
+#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */
+#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */
+#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */
+#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */
+#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */
+#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */
+#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */
+#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */
+
+#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */
+#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */
+#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91rm9200.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_H
+#define AT91RM9200_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripheral */
+#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */
+#define AT91RM9200_ID_US0 6 /* USART 0 */
+#define AT91RM9200_ID_US1 7 /* USART 1 */
+#define AT91RM9200_ID_US2 8 /* USART 2 */
+#define AT91RM9200_ID_US3 9 /* USART 3 */
+#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */
+#define AT91RM9200_ID_UDP 11 /* USB Device Port */
+#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */
+#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */
+#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */
+#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */
+#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */
+#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */
+#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */
+#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */
+#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */
+#define AT91RM9200_ID_UHP 23 /* USB Host port */
+#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */
+#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */
+#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */
+#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */
+#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */
+#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */
+#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */
+
+
+/*
+ * Peripheral physical base addresses.
+ */
+#define AT91RM9200_BASE_TCB0 0xfffa0000
+#define AT91RM9200_BASE_TC0 0xfffa0000
+#define AT91RM9200_BASE_TC1 0xfffa0040
+#define AT91RM9200_BASE_TC2 0xfffa0080
+#define AT91RM9200_BASE_TCB1 0xfffa4000
+#define AT91RM9200_BASE_TC3 0xfffa4000
+#define AT91RM9200_BASE_TC4 0xfffa4040
+#define AT91RM9200_BASE_TC5 0xfffa4080
+#define AT91RM9200_BASE_UDP 0xfffb0000
+#define AT91RM9200_BASE_MCI 0xfffb4000
+#define AT91RM9200_BASE_TWI 0xfffb8000
+#define AT91RM9200_BASE_EMAC 0xfffbc000
+#define AT91RM9200_BASE_US0 0xfffc0000
+#define AT91RM9200_BASE_US1 0xfffc4000
+#define AT91RM9200_BASE_US2 0xfffc8000
+#define AT91RM9200_BASE_US3 0xfffcc000
+#define AT91RM9200_BASE_SSC0 0xfffd0000
+#define AT91RM9200_BASE_SSC1 0xfffd4000
+#define AT91RM9200_BASE_SSC2 0xfffd8000
+#define AT91RM9200_BASE_SPI 0xfffe0000
+#define AT91_BASE_SYS 0xfffff000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) /* PIO Controller C */
+#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) /* PIO Controller D */
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */
+#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */
+#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */
+#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */
+
+#define AT91_MATRIX 0 /* not supported */
+
+/*
+ * Internal Memory.
+ */
+#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */
+#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
+
+#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */
+#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
+
+#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */
+
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+#define AT91_PA0_MISO (1 << 0) /* A: SPI Master-In Slave-Out */
+#define AT91_PA0_PCK3 (1 << 0) /* B: PMC Programmable Clock Output 3 */
+#define AT91_PA1_MOSI (1 << 1) /* A: SPI Master-Out Slave-In */
+#define AT91_PA1_PCK0 (1 << 1) /* B: PMC Programmable Clock Output 0 */
+#define AT91_PA2_SPCK (1 << 2) /* A: SPI Serial Clock */
+#define AT91_PA2_IRQ4 (1 << 2) /* B: External Interrupt 4 */
+#define AT91_PA3_NPCS0 (1 << 3) /* A: SPI Peripheral Chip Select 0 */
+#define AT91_PA3_IRQ5 (1 << 3) /* B: External Interrupt 5 */
+#define AT91_PA4_NPCS1 (1 << 4) /* A: SPI Peripheral Chip Select 1 */
+#define AT91_PA4_PCK1 (1 << 4) /* B: PMC Programmable Clock Output 1 */
+#define AT91_PA5_NPCS2 (1 << 5) /* A: SPI Peripheral Chip Select 2 */
+#define AT91_PA5_TXD3 (1 << 5) /* B: USART Transmit Data 3 */
+#define AT91_PA6_NPCS3 (1 << 6) /* A: SPI Peripheral Chip Select 3 */
+#define AT91_PA6_RXD3 (1 << 6) /* B: USART Receive Data 3 */
+#define AT91_PA7_ETXCK_EREFCK (1 << 7) /* A: Ethernet Reference Clock / Transmit Clock */
+#define AT91_PA7_PCK2 (1 << 7) /* B: PMC Programmable Clock Output 2 */
+#define AT91_PA8_ETXEN (1 << 8) /* A: Ethernet Transmit Enable */
+#define AT91_PA8_MCCDB (1 << 8) /* B: MMC Multimedia Card B Command */
+#define AT91_PA9_ETX0 (1 << 9) /* A: Ethernet Transmit Data 0 */
+#define AT91_PA9_MCDB0 (1 << 9) /* B: MMC Multimedia Card B Data 0 */
+#define AT91_PA10_ETX1 (1 << 10) /* A: Ethernet Transmit Data 1 */
+#define AT91_PA10_MCDB1 (1 << 10) /* B: MMC Multimedia Card B Data 1 */
+#define AT91_PA11_ECRS_ECRSDV (1 << 11) /* A: Ethernet Carrier Sense / Data Valid */
+#define AT91_PA11_MCDB2 (1 << 11) /* B: MMC Multimedia Card B Data 2 */
+#define AT91_PA12_ERX0 (1 << 12) /* A: Ethernet Receive Data 0 */
+#define AT91_PA12_MCDB3 (1 << 12) /* B: MMC Multimedia Card B Data 3 */
+#define AT91_PA13_ERX1 (1 << 13) /* A: Ethernet Receive Data 1 */
+#define AT91_PA13_TCLK0 (1 << 13) /* B: TC External Clock Input 0 */
+#define AT91_PA14_ERXER (1 << 14) /* A: Ethernet Receive Error */
+#define AT91_PA14_TCLK1 (1 << 14) /* B: TC External Clock Input 1 */
+#define AT91_PA15_EMDC (1 << 15) /* A: Ethernet Management Data Clock */
+#define AT91_PA15_TCLK2 (1 << 15) /* B: TC External Clock Input 2 */
+#define AT91_PA16_EMDIO (1 << 16) /* A: Ethernet Management Data I/O */
+#define AT91_PA16_IRQ6 (1 << 16) /* B: External Interrupt 6 */
+#define AT91_PA17_TXD0 (1 << 17) /* A: USART Transmit Data 0 */
+#define AT91_PA17_TIOA0 (1 << 17) /* B: TC I/O Line A 0 */
+#define AT91_PA18_RXD0 (1 << 18) /* A: USART Receive Data 0 */
+#define AT91_PA18_TIOB0 (1 << 18) /* B: TC I/O Line B 0 */
+#define AT91_PA19_SCK0 (1 << 19) /* A: USART Serial Clock 0 */
+#define AT91_PA19_TIOA1 (1 << 19) /* B: TC I/O Line A 1 */
+#define AT91_PA20_CTS0 (1 << 20) /* A: USART Clear To Send 0 */
+#define AT91_PA20_TIOB1 (1 << 20) /* B: TC I/O Line B 1 */
+#define AT91_PA21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
+#define AT91_PA21_TIOA2 (1 << 21) /* B: TC I/O Line A 2 */
+#define AT91_PA22_RXD2 (1 << 22) /* A: USART Receive Data 2 */
+#define AT91_PA22_TIOB2 (1 << 22) /* B: TC I/O Line B 2 */
+#define AT91_PA23_TXD2 (1 << 23) /* A: USART Transmit Data 2 */
+#define AT91_PA23_IRQ3 (1 << 23) /* B: External Interrupt 3 */
+#define AT91_PA24_SCK2 (1 << 24) /* A: USART Serial Clock 2 */
+#define AT91_PA24_PCK1 (1 << 24) /* B: PMC Programmable Clock Output 1 */
+#define AT91_PA25_TWD (1 << 25) /* A: TWI Two-wire Serial Data */
+#define AT91_PA25_IRQ2 (1 << 25) /* B: External Interrupt 2 */
+#define AT91_PA26_TWCK (1 << 26) /* A: TWI Two-wire Serial Clock */
+#define AT91_PA26_IRQ1 (1 << 26) /* B: External Interrupt 1 */
+#define AT91_PA27_MCCK (1 << 27) /* A: MMC Multimedia Card Clock */
+#define AT91_PA27_TCLK3 (1 << 27) /* B: TC External Clock Input 3 */
+#define AT91_PA28_MCCDA (1 << 28) /* A: MMC Multimedia Card A Command */
+#define AT91_PA28_TCLK4 (1 << 28) /* B: TC External Clock Input 4 */
+#define AT91_PA29_MCDA0 (1 << 29) /* A: MMC Multimedia Card A Data 0 */
+#define AT91_PA29_TCLK5 (1 << 29) /* B: TC External Clock Input 5 */
+#define AT91_PA30_DRXD (1 << 30) /* A: DBGU Receive Data */
+#define AT91_PA30_CTS2 (1 << 30) /* B: USART Clear To Send 2 */
+#define AT91_PA31_DTXD (1 << 31) /* A: DBGU Transmit Data */
+#define AT91_PA31_RTS2 (1 << 31) /* B: USART Ready To Send 2 */
+
+#define AT91_PB0_TF0 (1 << 0) /* A: SSC Transmit Frame Sync 0 */
+#define AT91_PB0_RTS3 (1 << 0) /* B: USART Ready To Send 3 */
+#define AT91_PB1_TK0 (1 << 1) /* A: SSC Transmit Clock 0 */
+#define AT91_PB1_CTS3 (1 << 1) /* B: USART Clear To Send 3 */
+#define AT91_PB2_TD0 (1 << 2) /* A: SSC Transmit Data 0 */
+#define AT91_PB2_SCK3 (1 << 2) /* B: USART Serial Clock 3 */
+#define AT91_PB3_RD0 (1 << 3) /* A: SSC Receive Data 0 */
+#define AT91_PB3_MCDA1 (1 << 3) /* B: MMC Multimedia Card A Data 1 */
+#define AT91_PB4_RK0 (1 << 4) /* A: SSC Receive Clock 0 */
+#define AT91_PB4_MCDA2 (1 << 4) /* B: MMC Multimedia Card A Data 2 */
+#define AT91_PB5_RF0 (1 << 5) /* A: SSC Receive Frame Sync 0 */
+#define AT91_PB5_MCDA3 (1 << 5) /* B: MMC Multimedia Card A Data 3 */
+#define AT91_PB6_TF1 (1 << 6) /* A: SSC Transmit Frame Sync 1 */
+#define AT91_PB6_TIOA3 (1 << 6) /* B: TC I/O Line A 3 */
+#define AT91_PB7_TK1 (1 << 7) /* A: SSC Transmit Clock 1 */
+#define AT91_PB7_TIOB3 (1 << 7) /* B: TC I/O Line B 3 */
+#define AT91_PB8_TD1 (1 << 8) /* A: SSC Transmit Data 1 */
+#define AT91_PB8_TIOA4 (1 << 8) /* B: TC I/O Line A 4 */
+#define AT91_PB9_RD1 (1 << 9) /* A: SSC Receive Data 1 */
+#define AT91_PB9_TIOB4 (1 << 9) /* B: TC I/O Line B 4 */
+#define AT91_PB10_RK1 (1 << 10) /* A: SSC Receive Clock 1 */
+#define AT91_PB10_TIOA5 (1 << 10) /* B: TC I/O Line A 5 */
+#define AT91_PB11_RF1 (1 << 11) /* A: SSC Receive Frame Sync 1 */
+#define AT91_PB11_TIOB5 (1 << 11) /* B: TC I/O Line B 5 */
+#define AT91_PB12_TF2 (1 << 12) /* A: SSC Transmit Frame Sync 2 */
+#define AT91_PB12_ETX2 (1 << 12) /* B: Ethernet Transmit Data 2 */
+#define AT91_PB13_TK2 (1 << 13) /* A: SSC Transmit Clock 3 */
+#define AT91_PB13_ETX3 (1 << 13) /* B: Ethernet Transmit Data 3 */
+#define AT91_PB14_TD2 (1 << 14) /* A: SSC Transmit Data 2 */
+#define AT91_PB14_ETXER (1 << 14) /* B: Ethernet Transmit Coding Error */
+#define AT91_PB15_RD2 (1 << 15) /* A: SSC Receive Data 2 */
+#define AT91_PB15_ERX2 (1 << 15) /* B: Ethernet Receive Data 2 */
+#define AT91_PB16_RK2 (1 << 16) /* A: SSC Receive Clock 2 */
+#define AT91_PB16_ERX3 (1 << 16) /* B: Ethernet Receive Data 3 */
+#define AT91_PB17_RF2 (1 << 17) /* A: SSC Receive Frame Sync 2 */
+#define AT91_PB17_ERXDV (1 << 17) /* B: Ethernet Receive Data Valid */
+#define AT91_PB18_RI1 (1 << 18) /* A: USART Ring Indicator 1 */
+#define AT91_PB18_ECOL (1 << 18) /* B: Ethernet Collision Detected */
+#define AT91_PB19_DTR1 (1 << 19) /* A: USART Data Terminal Ready 1 */
+#define AT91_PB19_ERXCK (1 << 19) /* B: Ethernet Receive Clock */
+#define AT91_PB20_TXD1 (1 << 20) /* A: USART Transmit Data 1 */
+#define AT91_PB21_RXD1 (1 << 21) /* A: USART Receive Data 1 */
+#define AT91_PB22_SCK1 (1 << 22) /* A: USART Serial Clock 1 */
+#define AT91_PB23_DCD1 (1 << 23) /* A: USART Data Carrier Detect 1 */
+#define AT91_PB24_CTS1 (1 << 24) /* A: USART Clear To Send 1 */
+#define AT91_PB25_DSR1 (1 << 25) /* A: USART Data Set Ready 1 */
+#define AT91_PB25_EF100 (1 << 25) /* B: Ethernet Force 100 Mbit */
+#define AT91_PB26_RTS1 (1 << 26) /* A: USART Ready To Send 1 */
+#define AT91_PB27_PCK0 (1 << 27) /* B: PMC Programmable Clock Output 0 */
+#define AT91_PB28_FIQ (1 << 28) /* A: Fast Interrupt */
+#define AT91_PB29_IRQ0 (1 << 29) /* A: External Interrupt 0 */
+
+#define AT91_PC0_BFCK (1 << 0) /* A: Burst Flash Clock */
+#define AT91_PC1_BFRDY_SMOE (1 << 1) /* A: Burst Flash Ready / SmartMedia Output Enable */
+#define AT91_PC2_BFAVD (1 << 2) /* A: Burst Flash Address Valid */
+#define AT91_PC3_BFBAA_SMWE (1 << 3) /* A: Burst Flash Address Advance / SmartMedia Write Enable */
+#define AT91_PC4_BFOE (1 << 4) /* A: Burst Flash Output Enable */
+#define AT91_PC5_BFWE (1 << 5) /* A: Burst Flash Write Enable */
+#define AT91_PC6_NWAIT (1 << 6) /* A: SMC Wait Signal */
+#define AT91_PC7_A23 (1 << 7) /* A: Address Bus 23 */
+#define AT91_PC8_A24 (1 << 8) /* A: Address Bus 24 */
+#define AT91_PC9_A25_CFRNW (1 << 9) /* A: Address Bus 25 / Compact Flash Read Not Write */
+#define AT91_PC10_NCS4_CFCS (1 << 10) /* A: SMC Chip Select 4 / Compact Flash Chip Select */
+#define AT91_PC11_NCS5_CFCE1 (1 << 11) /* A: SMC Chip Select 5 / Compact Flash Chip Enable 1 */
+#define AT91_PC12_NCS6_CFCE2 (1 << 12) /* A: SMC Chip Select 6 / Compact Flash Chip Enable 2 */
+#define AT91_PC13_NCS7 (1 << 13) /* A: Chip Select 7 */
+
+#define AT91_PD0_ETX0 (1 << 0) /* A: Ethernet Transmit Data 0 */
+#define AT91_PD1_ETX1 (1 << 1) /* A: Ethernet Transmit Data 1 */
+#define AT91_PD2_ETX2 (1 << 2) /* A: Ethernet Transmit Data 2 */
+#define AT91_PD3_ETX3 (1 << 3) /* A: Ethernet Transmit Data 3 */
+#define AT91_PD4_ETXEN (1 << 4) /* A: Ethernet Transmit Enable */
+#define AT91_PD5_ETXER (1 << 5) /* A: Ethernet Transmit Coding Error */
+#define AT91_PD6_DTXD (1 << 6) /* A: DBGU Transmit Data */
+#define AT91_PD7_PCK0 (1 << 7) /* A: PMC Programmable Clock Output 0 */
+#define AT91_PD7_TSYNC (1 << 7) /* B: ETM Trace Synchronization Signal */
+#define AT91_PD8_PCK1 (1 << 8) /* A: PMC Programmable Clock Output 1 */
+#define AT91_PD8_TCLK (1 << 8) /* B: ETM Trace Clock */
+#define AT91_PD9_PCK2 (1 << 9) /* A: PMC Programmable Clock Output 2 */
+#define AT91_PD9_TPS0 (1 << 9) /* B: ETM Trace ARM Pipeline Status 0 */
+#define AT91_PD10_PCK3 (1 << 10) /* A: PMC Programmable Clock Output 3 */
+#define AT91_PD10_TPS1 (1 << 10) /* B: ETM Trace ARM Pipeline Status 1 */
+#define AT91_PD11_TPS2 (1 << 11) /* B: ETM Trace ARM Pipeline Status 2 */
+#define AT91_PD12_TPK0 (1 << 12) /* B: ETM Trace Packet Port 0 */
+#define AT91_PD13_TPK1 (1 << 13) /* B: ETM Trace Packet Port 1 */
+#define AT91_PD14_TPK2 (1 << 14) /* B: ETM Trace Packet Port 2 */
+#define AT91_PD15_TD0 (1 << 15) /* A: SSC Transmit Data 0 */
+#define AT91_PD15_TPK3 (1 << 15) /* B: ETM Trace Packet Port 3 */
+#define AT91_PD16_TD1 (1 << 16) /* A: SSC Transmit Data 1 */
+#define AT91_PD16_TPK4 (1 << 16) /* B: ETM Trace Packet Port 4 */
+#define AT91_PD17_TD2 (1 << 17) /* A: SSC Transmit Data 2 */
+#define AT91_PD17_TPK5 (1 << 17) /* B: ETM Trace Packet Port 5 */
+#define AT91_PD18_NPCS1 (1 << 18) /* A: SPI Peripheral Chip Select 1 */
+#define AT91_PD18_TPK6 (1 << 18) /* B: ETM Trace Packet Port 6 */
+#define AT91_PD19_NPCS2 (1 << 19) /* A: SPI Peripheral Chip Select 2 */
+#define AT91_PD19_TPK7 (1 << 19) /* B: ETM Trace Packet Port 7 */
+#define AT91_PD20_NPCS3 (1 << 20) /* A: SPI Peripheral Chip Select 3 */
+#define AT91_PD20_TPK8 (1 << 20) /* B: ETM Trace Packet Port 8 */
+#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
+#define AT91_PD21_TPK9 (1 << 21) /* B: ETM Trace Packet Port 9 */
+#define AT91_PD22_RTS1 (1 << 22) /* A: USART Ready To Send 1 */
+#define AT91_PD22_TPK10 (1 << 22) /* B: ETM Trace Packet Port 10 */
+#define AT91_PD23_RTS2 (1 << 23) /* A: USART Ready To Send 2 */
+#define AT91_PD23_TPK11 (1 << 23) /* B: ETM Trace Packet Port 11 */
+#define AT91_PD24_RTS3 (1 << 24) /* A: USART Ready To Send 3 */
+#define AT91_PD24_TPK12 (1 << 24) /* B: ETM Trace Packet Port 12 */
+#define AT91_PD25_DTR1 (1 << 25) /* A: USART Data Terminal Ready 1 */
+#define AT91_PD25_TPK13 (1 << 25) /* B: ETM Trace Packet Port 13 */
+#define AT91_PD26_TPK14 (1 << 26) /* B: ETM Trace Packet Port 14 */
+#define AT91_PD27_TPK15 (1 << 27) /* B: ETM Trace Packet Port 15 */
+#endif
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91rm9200_emac.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Ethernet MAC registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_EMAC_H
+#define AT91RM9200_EMAC_H
+
+#define AT91_EMAC_CTL 0x00 /* Control Register */
+#define AT91_EMAC_LB (1 << 0) /* Loopback */
+#define AT91_EMAC_LBL (1 << 1) /* Loopback Local */
+#define AT91_EMAC_RE (1 << 2) /* Receive Enable */
+#define AT91_EMAC_TE (1 << 3) /* Transmit Enable */
+#define AT91_EMAC_MPE (1 << 4) /* Management Port Enable */
+#define AT91_EMAC_CSR (1 << 5) /* Clear Statistics Registers */
+#define AT91_EMAC_INCSTAT (1 << 6) /* Increment Statistics Registers */
+#define AT91_EMAC_WES (1 << 7) /* Write Enable for Statistics Registers */
+#define AT91_EMAC_BP (1 << 8) /* Back Pressure */
+
+#define AT91_EMAC_CFG 0x04 /* Configuration Register */
+#define AT91_EMAC_SPD (1 << 0) /* Speed */
+#define AT91_EMAC_FD (1 << 1) /* Full Duplex */
+#define AT91_EMAC_BR (1 << 2) /* Bit Rate */
+#define AT91_EMAC_CAF (1 << 4) /* Copy All Frames */
+#define AT91_EMAC_NBC (1 << 5) /* No Broadcast */
+#define AT91_EMAC_MTI (1 << 6) /* Multicast Hash Enable */
+#define AT91_EMAC_UNI (1 << 7) /* Unicast Hash Enable */
+#define AT91_EMAC_BIG (1 << 8) /* Receive 1522 Bytes */
+#define AT91_EMAC_EAE (1 << 9) /* External Address Match Enable */
+#define AT91_EMAC_CLK (3 << 10) /* MDC Clock Divisor */
+#define AT91_EMAC_CLK_DIV8 (0 << 10)
+#define AT91_EMAC_CLK_DIV16 (1 << 10)
+#define AT91_EMAC_CLK_DIV32 (2 << 10)
+#define AT91_EMAC_CLK_DIV64 (3 << 10)
+#define AT91_EMAC_RTY (1 << 12) /* Retry Test */
+#define AT91_EMAC_RMII (1 << 13) /* Reduce MII (RMII) */
+
+#define AT91_EMAC_SR 0x08 /* Status Register */
+#define AT91_EMAC_SR_LINK (1 << 0) /* Link */
+#define AT91_EMAC_SR_MDIO (1 << 1) /* MDIO pin */
+#define AT91_EMAC_SR_IDLE (1 << 2) /* PHY idle */
+
+#define AT91_EMAC_TAR 0x0c /* Transmit Address Register */
+
+#define AT91_EMAC_TCR 0x10 /* Transmit Control Register */
+#define AT91_EMAC_LEN (0x7ff << 0) /* Transmit Frame Length */
+#define AT91_EMAC_NCRC (1 << 15) /* No CRC */
+
+#define AT91_EMAC_TSR 0x14 /* Transmit Status Register */
+#define AT91_EMAC_TSR_OVR (1 << 0) /* Transmit Buffer Overrun */
+#define AT91_EMAC_TSR_COL (1 << 1) /* Collision Occurred */
+#define AT91_EMAC_TSR_RLE (1 << 2) /* Retry Limit Exceeded */
+#define AT91_EMAC_TSR_IDLE (1 << 3) /* Transmitter Idle */
+#define AT91_EMAC_TSR_BNQ (1 << 4) /* Transmit Buffer not Queued */
+#define AT91_EMAC_TSR_COMP (1 << 5) /* Transmit Complete */
+#define AT91_EMAC_TSR_UND (1 << 6) /* Transmit Underrun */
+
+#define AT91_EMAC_RBQP 0x18 /* Receive Buffer Queue Pointer */
+
+#define AT91_EMAC_RSR 0x20 /* Receive Status Register */
+#define AT91_EMAC_RSR_BNA (1 << 0) /* Buffer Not Available */
+#define AT91_EMAC_RSR_REC (1 << 1) /* Frame Received */
+#define AT91_EMAC_RSR_OVR (1 << 2) /* RX Overrun */
+
+#define AT91_EMAC_ISR 0x24 /* Interrupt Status Register */
+#define AT91_EMAC_DONE (1 << 0) /* Management Done */
+#define AT91_EMAC_RCOM (1 << 1) /* Receive Complete */
+#define AT91_EMAC_RBNA (1 << 2) /* Receive Buffer Not Available */
+#define AT91_EMAC_TOVR (1 << 3) /* Transmit Buffer Overrun */
+#define AT91_EMAC_TUND (1 << 4) /* Transmit Buffer Underrun */
+#define AT91_EMAC_RTRY (1 << 5) /* Retry Limit */
+#define AT91_EMAC_TBRE (1 << 6) /* Transmit Buffer Register Empty */
+#define AT91_EMAC_TCOM (1 << 7) /* Transmit Complete */
+#define AT91_EMAC_TIDLE (1 << 8) /* Transmit Idle */
+#define AT91_EMAC_LINK (1 << 9) /* Link */
+#define AT91_EMAC_ROVR (1 << 10) /* RX Overrun */
+#define AT91_EMAC_ABT (1 << 11) /* Abort */
+
+#define AT91_EMAC_IER 0x28 /* Interrupt Enable Register */
+#define AT91_EMAC_IDR 0x2c /* Interrupt Disable Register */
+#define AT91_EMAC_IMR 0x30 /* Interrupt Mask Register */
+
+#define AT91_EMAC_MAN 0x34 /* PHY Maintenance Register */
+#define AT91_EMAC_DATA (0xffff << 0) /* MDIO Data */
+#define AT91_EMAC_REGA (0x1f << 18) /* MDIO Register */
+#define AT91_EMAC_PHYA (0x1f << 23) /* MDIO PHY Address */
+#define AT91_EMAC_RW (3 << 28) /* Read/Write operation */
+#define AT91_EMAC_RW_W (1 << 28)
+#define AT91_EMAC_RW_R (2 << 28)
+#define AT91_EMAC_MAN_802_3 0x40020000 /* IEEE 802.3 value */
+
+/*
+ * Statistics Registers.
+ */
+#define AT91_EMAC_FRA 0x40 /* Frames Transmitted OK */
+#define AT91_EMAC_SCOL 0x44 /* Single Collision Frame */
+#define AT91_EMAC_MCOL 0x48 /* Multiple Collision Frame */
+#define AT91_EMAC_OK 0x4c /* Frames Received OK */
+#define AT91_EMAC_SEQE 0x50 /* Frame Check Sequence Error */
+#define AT91_EMAC_ALE 0x54 /* Alignmemt Error */
+#define AT91_EMAC_DTE 0x58 /* Deffered Transmission Frame */
+#define AT91_EMAC_LCOL 0x5c /* Late Collision */
+#define AT91_EMAC_ECOL 0x60 /* Excessive Collision */
+#define AT91_EMAC_TUE 0x64 /* Transmit Underrun Error */
+#define AT91_EMAC_CSE 0x68 /* Carrier Sense Error */
+#define AT91_EMAC_DRFC 0x6c /* Discard RX Frame */
+#define AT91_EMAC_ROV 0x70 /* Receive Overrun */
+#define AT91_EMAC_CDE 0x74 /* Code Error */
+#define AT91_EMAC_ELR 0x78 /* Excessive Length Error */
+#define AT91_EMAC_RJB 0x7c /* Receive Jabber */
+#define AT91_EMAC_USF 0x80 /* Undersize Frame */
+#define AT91_EMAC_SQEE 0x84 /* SQE Test Error */
+
+/*
+ * Address Registers.
+ */
+#define AT91_EMAC_HSL 0x90 /* Hash Address Low [31:0] */
+#define AT91_EMAC_HSH 0x94 /* Hash Address High [63:32] */
+#define AT91_EMAC_SA1L 0x98 /* Specific Address 1 Low, bytes 0-3 */
+#define AT91_EMAC_SA1H 0x9c /* Specific Address 1 High, bytes 4-5 */
+#define AT91_EMAC_SA2L 0xa0 /* Specific Address 2 Low, bytes 0-3 */
+#define AT91_EMAC_SA2H 0xa4 /* Specific Address 2 High, bytes 4-5 */
+#define AT91_EMAC_SA3L 0xa8 /* Specific Address 3 Low, bytes 0-3 */
+#define AT91_EMAC_SA3H 0xac /* Specific Address 3 High, bytes 4-5 */
+#define AT91_EMAC_SA4L 0xb0 /* Specific Address 4 Low, bytes 0-3 */
+#define AT91_EMAC_SA4H 0xb4 /* Specific Address 4 High, bytes 4-5 */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91rm9200_mc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_MC_H
+#define AT91RM9200_MC_H
+
+/* Memory Controller */
+#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */
+#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */
+
+#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */
+#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */
+#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */
+#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */
+#define AT91_MC_ABTSZ_BYTE (0 << 8)
+#define AT91_MC_ABTSZ_HALFWORD (1 << 8)
+#define AT91_MC_ABTSZ_WORD (2 << 8)
+#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */
+#define AT91_MC_ABTTYP_DATAREAD (0 << 10)
+#define AT91_MC_ABTTYP_DATAWRITE (1 << 10)
+#define AT91_MC_ABTTYP_FETCH (2 << 10)
+#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */
+#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */
+#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */
+#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */
+#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */
+#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */
+#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */
+#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */
+
+#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */
+
+#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */
+#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */
+#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */
+#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */
+#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */
+
+/* External Bus Interface (EBI) registers */
+#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */
+#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */
+#define AT91_EBI_CS0A_SMC (0 << 0)
+#define AT91_EBI_CS0A_BFC (1 << 0)
+#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_EBI_CS1A_SMC (0 << 1)
+#define AT91_EBI_CS1A_SDRAMC (1 << 1)
+#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */
+#define AT91_EBI_CS3A_SMC (0 << 3)
+#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */
+#define AT91_EBI_CS4A_SMC (0 << 4)
+#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4)
+#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */
+#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
+#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */
+#define AT91_SMC_NWS_(x) ((x) << 0)
+#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */
+#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */
+#define AT91_SMC_TDF_(x) ((x) << 8)
+#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */
+#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */
+#define AT91_SMC_DBW_16 (1 << 13)
+#define AT91_SMC_DBW_8 (2 << 13)
+#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */
+#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */
+#define AT91_SMC_ACSS_STD (0 << 16)
+#define AT91_SMC_ACSS_1 (1 << 16)
+#define AT91_SMC_ACSS_2 (2 << 16)
+#define AT91_SMC_ACSS_3 (3 << 16)
+#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */
+#define AT91_SMC_RWSETUP_(x) ((x) << 24)
+#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */
+#define AT91_SMC_RWHOLD_(x) ((x) << 28)
+
+/* SDRAM Controller registers */
+#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */
+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
+#define AT91_SDRAMC_MODE_NORMAL (0 << 0)
+#define AT91_SDRAMC_MODE_NOP (1 << 0)
+#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0)
+#define AT91_SDRAMC_MODE_LMR (3 << 0)
+#define AT91_SDRAMC_MODE_REFRESH (4 << 0)
+#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */
+#define AT91_SDRAMC_DBW_32 (0 << 4)
+#define AT91_SDRAMC_DBW_16 (1 << 4)
+
+#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */
+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */
+
+#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */
+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
+#define AT91_SDRAMC_NC_8 (0 << 0)
+#define AT91_SDRAMC_NC_9 (1 << 0)
+#define AT91_SDRAMC_NC_10 (2 << 0)
+#define AT91_SDRAMC_NC_11 (3 << 0)
+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_SDRAMC_NR_11 (0 << 2)
+#define AT91_SDRAMC_NR_12 (1 << 2)
+#define AT91_SDRAMC_NR_13 (2 << 2)
+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
+#define AT91_SDRAMC_NB_2 (0 << 4)
+#define AT91_SDRAMC_NB_4 (1 << 4)
+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
+#define AT91_SDRAMC_CAS_2 (2 << 5)
+#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */
+#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */
+#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */
+#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */
+#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */
+#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */
+#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */
+#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */
+#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */
+#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */
+#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */
+
+/* Burst Flash Controller register */
+#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */
+#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */
+#define AT91_BFC_BFCOM_DISABLED (0 << 0)
+#define AT91_BFC_BFCOM_ASYNC (1 << 0)
+#define AT91_BFC_BFCOM_BURST (2 << 0)
+#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */
+#define AT91_BFC_BFCC_MCK (1 << 2)
+#define AT91_BFC_BFCC_DIV2 (2 << 2)
+#define AT91_BFC_BFCC_DIV4 (3 << 2)
+#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */
+#define AT91_BFC_PAGES (7 << 8) /* Page Size */
+#define AT91_BFC_PAGES_NO_PAGE (0 << 8)
+#define AT91_BFC_PAGES_16 (1 << 8)
+#define AT91_BFC_PAGES_32 (2 << 8)
+#define AT91_BFC_PAGES_64 (3 << 8)
+#define AT91_BFC_PAGES_128 (4 << 8)
+#define AT91_BFC_PAGES_256 (5 << 8)
+#define AT91_BFC_PAGES_512 (6 << 8)
+#define AT91_BFC_PAGES_1024 (7 << 8)
+#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */
+#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */
+#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */
+#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */
+#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91sam9260.h
+ *
+ * (C) 2006 Andrew Victor
+ *
+ * Common definitions.
+ * Based on AT91SAM9260 datasheet revision A (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_H
+#define AT91SAM9260_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */
+#define AT91SAM9260_ID_US0 6 /* USART 0 */
+#define AT91SAM9260_ID_US1 7 /* USART 1 */
+#define AT91SAM9260_ID_US2 8 /* USART 2 */
+#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */
+#define AT91SAM9260_ID_UDP 10 /* USB Device Port */
+#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */
+#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */
+#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */
+#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */
+#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */
+#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */
+#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */
+#define AT91SAM9260_ID_UHP 20 /* USB Host port */
+#define AT91SAM9260_ID_EMAC 21 /* Ethernet */
+#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */
+#define AT91SAM9260_ID_US3 23 /* USART 3 */
+#define AT91SAM9260_ID_US4 24 /* USART 4 */
+#define AT91SAM9260_ID_US5 25 /* USART 5 */
+#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */
+#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */
+#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */
+#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9260_BASE_TCB0 0xfffa0000
+#define AT91SAM9260_BASE_TC0 0xfffa0000
+#define AT91SAM9260_BASE_TC1 0xfffa0040
+#define AT91SAM9260_BASE_TC2 0xfffa0080
+#define AT91SAM9260_BASE_UDP 0xfffa4000
+#define AT91SAM9260_BASE_MCI 0xfffa8000
+#define AT91SAM9260_BASE_TWI 0xfffac000
+#define AT91SAM9260_BASE_US0 0xfffb0000
+#define AT91SAM9260_BASE_US1 0xfffb4000
+#define AT91SAM9260_BASE_US2 0xfffb8000
+#define AT91SAM9260_BASE_SSC 0xfffbc000
+#define AT91SAM9260_BASE_ISI 0xfffc0000
+#define AT91SAM9260_BASE_EMAC 0xfffc4000
+#define AT91SAM9260_BASE_SPI0 0xfffc8000
+#define AT91SAM9260_BASE_SPI1 0xfffcc000
+#define AT91SAM9260_BASE_US3 0xfffd0000
+#define AT91SAM9260_BASE_US4 0xfffd4000
+#define AT91SAM9260_BASE_US5 0xfffd8000
+#define AT91SAM9260_BASE_TCB1 0xfffdc000
+#define AT91SAM9260_BASE_TC3 0xfffdc000
+#define AT91SAM9260_BASE_TC4 0xfffdc040
+#define AT91SAM9260_BASE_TC5 0xfffdc080
+#define AT91SAM9260_BASE_ADC 0xfffe0000
+#define AT91_BASE_SYS 0xffffe800
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */
+#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
+#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */
+#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
+#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */
+
+#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+
+// TODO: Add
+
+#endif
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91sam9260_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_MATRIX_H
+#define AT91SAM9260_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x04) /* Master Configuration Register 5 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91sam9261.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */
+#define AT91SAM9261_ID_US0 6 /* USART 0 */
+#define AT91SAM9261_ID_US1 7 /* USART 1 */
+#define AT91SAM9261_ID_US2 8 /* USART 2 */
+#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */
+#define AT91SAM9261_ID_UDP 10 /* USB Device Port */
+#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */
+#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */
+#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */
+#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */
+#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */
+#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */
+#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */
+#define AT91SAM9261_ID_UHP 20 /* USB Host port */
+#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */
+#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9261_BASE_TCB0 0xfffa0000
+#define AT91SAM9261_BASE_TC0 0xfffa0000
+#define AT91SAM9261_BASE_TC1 0xfffa0040
+#define AT91SAM9261_BASE_TC2 0xfffa0080
+#define AT91SAM9261_BASE_UDP 0xfffa4000
+#define AT91SAM9261_BASE_MCI 0xfffa8000
+#define AT91SAM9261_BASE_TWI 0xfffac000
+#define AT91SAM9261_BASE_US0 0xfffb0000
+#define AT91SAM9261_BASE_US1 0xfffb4000
+#define AT91SAM9261_BASE_US2 0xfffb8000
+#define AT91SAM9261_BASE_SSC0 0xfffbc000
+#define AT91SAM9261_BASE_SSC1 0xfffc0000
+#define AT91SAM9261_BASE_SSC2 0xfffc4000
+#define AT91SAM9261_BASE_SPI0 0xfffc8000
+#define AT91SAM9261_BASE_SPI1 0xfffcc000
+#define AT91_BASE_SYS 0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
+
+#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
+
+#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */
+#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */
+
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+#define AT91_PA0_SPI0_MISO (1 << 0) /* A: SPI0 Master In Slave */
+#define AT91_PA0_MCDA0 (1 << 0) /* B: Multimedia Card A Data 0 */
+#define AT91_PA1_SPI0_MOSI (1 << 1) /* A: SPI0 Master Out Slave */
+#define AT91_PA1_MCCDA (1 << 1) /* B: Multimedia Card A Command */
+#define AT91_PA2_SPI0_SPCK (1 << 2) /* A: SPI0 Serial Clock */
+#define AT91_PA2_MCCK (1 << 2) /* B: Multimedia Card Clock */
+#define AT91_PA3_SPI0_NPCS0 (1 << 3) /* A: SPI0 Peripheral Chip Select 0 */
+#define AT91_PA4_SPI0_NPCS1 (1 << 4) /* A: SPI0 Peripheral Chip Select 1 */
+#define AT91_PA4_MCDA1 (1 << 4) /* B: Multimedia Card A Data 1 */
+#define AT91_PA5_SPI0_NPCS2 (1 << 5) /* A: SPI0 Peripheral Chip Select 2 */
+#define AT91_PA5_MCDA2 (1 << 5) /* B: Multimedia Card A Data 2 */
+#define AT91_PA6_SPI0_NPCS3 (1 << 6) /* A: SPI0 Peripheral Chip Select 3 */
+#define AT91_PA6_MCDA3 (1 << 6) /* B: Multimedia Card A Data 3 */
+#define AT91_PA7_TWD (1 << 7) /* A: TWI Two-wire Serial Data */
+#define AT91_PA7_PCK0 (1 << 7) /* B: PMC Programmable clock Output 0 */
+#define AT91_PA8_TWCK (1 << 8) /* A: TWI Two-wire Serial Clock */
+#define AT91_PA8_PCK1 (1 << 8) /* B: PMC Programmable clock Output 1 */
+#define AT91_PA9_DRXD (1 << 9) /* A: DBGU Debug Receive Data */
+#define AT91_PA9_PCK2 (1 << 9) /* B: PMC Programmable clock Output 2 */
+#define AT91_PA10_DTXD (1 << 10) /* A: DBGU Debug Transmit Data */
+#define AT91_PA10_PCK3 (1 << 10) /* B: PMC Programmable clock Output 3 */
+#define AT91_PA11_TSYNC (1 << 11) /* A: Trace Synchronization Signal */
+#define AT91_PA11_SCK1 (1 << 11) /* B: USART1 Serial Clock */
+#define AT91_PA12_TCLK (1 << 12) /* A: Trace Clock */
+#define AT91_PA12_RTS1 (1 << 12) /* B: USART1 Ready To Send */
+#define AT91_PA13_TPS0 (1 << 13) /* A: Trace ARM Pipeline Status 0 */
+#define AT91_PA13_CTS1 (1 << 13) /* B: USART1 Clear To Send */
+#define AT91_PA14_TPS1 (1 << 14) /* A: Trace ARM Pipeline Status 1 */
+#define AT91_PA14_SCK2 (1 << 14) /* B: USART2 Serial Clock */
+#define AT91_PA15_TPS2 (1 << 15) /* A: Trace ARM Pipeline Status 2 */
+#define AT91_PA15_RTS2 (1 << 15) /* B: USART2 Ready To Send */
+#define AT91_PA16_TPK0 (1 << 16) /* A: Trace Packet Port 0 */
+#define AT91_PA16_CTS2 (1 << 16) /* B: USART2 Clear To Send */
+#define AT91_PA17_TPK1 (1 << 17) /* A: Trace Packet Port 1 */
+#define AT91_PA17_TF1 (1 << 17) /* B: SSC1 Transmit Frame Sync */
+#define AT91_PA18_TPK2 (1 << 18) /* A: Trace Packet Port 2 */
+#define AT91_PA18_TK1 (1 << 18) /* B: SSC1 Transmit Clock */
+#define AT91_PA19_TPK3 (1 << 19) /* A: Trace Packet Port 3 */
+#define AT91_PA19_TD1 (1 << 19) /* B: SSC1 Transmit Data */
+#define AT91_PA20_TPK4 (1 << 20) /* A: Trace Packet Port 4 */
+#define AT91_PA20_RD1 (1 << 20) /* B: SSC1 Receive Data */
+#define AT91_PA21_TPK5 (1 << 21) /* A: Trace Packet Port 5 */
+#define AT91_PA21_RK1 (1 << 21) /* B: SSC1 Receive Clock */
+#define AT91_PA22_TPK6 (1 << 22) /* A: Trace Packet Port 6 */
+#define AT91_PA22_RF1 (1 << 22) /* B: SSC1 Receive Frame Sync */
+#define AT91_PA23_TPK7 (1 << 23) /* A: Trace Packet Port 7 */
+#define AT91_PA23_RTS0 (1 << 23) /* B: USART0 Ready To Send */
+#define AT91_PA24_TPK8 (1 << 24) /* A: Trace Packet Port 8 */
+#define AT91_PA24_SPI1_NPCS1 (1 << 24) /* B: SPI1 Peripheral Chip Select 1 */
+#define AT91_PA25_TPK9 (1 << 25) /* A: Trace Packet Port 9 */
+#define AT91_PA25_SPI1_NPCS2 (1 << 25) /* B: SPI1 Peripheral Chip Select 2 */
+#define AT91_PA26_TPK10 (1 << 26) /* A: Trace Packet Port 10 */
+#define AT91_PA26_SPI1_NPCS3 (1 << 26) /* B: SPI1 Peripheral Chip Select 3 */
+#define AT91_PA27_TPK11 (1 << 27) /* A: Trace Packet Port 11 */
+#define AT91_PA27_SPI0_NPCS1 (1 << 27) /* B: SPI0 Peripheral Chip Select 1 */
+#define AT91_PA28_TPK12 (1 << 28) /* A: Trace Packet Port 12 */
+#define AT91_PA28_SPI0_NPCS2 (1 << 28) /* B: SPI0 Peripheral Chip Select 2 */
+#define AT91_PA29_TPK13 (1 << 29) /* A: Trace Packet Port 13 */
+#define AT91_PA29_SPI0_NPCS3 (1 << 29) /* B: SPI0 Peripheral Chip Select 3 */
+#define AT91_PA30_TPK14 (1 << 30) /* A: Trace Packet Port 14 */
+#define AT91_PA30_A23 (1 << 30) /* B: Address Bus bit 23 */
+#define AT91_PA31_TPK15 (1 << 31) /* A: Trace Packet Port 15 */
+#define AT91_PA31_A24 (1 << 31) /* B: Address Bus bit 24 */
+
+#define AT91_PB0_LCDVSYNC (1 << 0) /* A: LCD Vertical Synchronization */
+#define AT91_PB1_LCDHSYNC (1 << 1) /* A: LCD Horizontal Synchronization */
+#define AT91_PB2_LCDDOTCK (1 << 2) /* A: LCD Dot Clock */
+#define AT91_PB2_PCK0 (1 << 2) /* B: PMC Programmable clock Output 0 */
+#define AT91_PB3_LCDDEN (1 << 3) /* A: LCD Data Enable */
+#define AT91_PB4_LCDCC (1 << 4) /* A: LCD Contrast Control */
+#define AT91_PB4_LCDD2 (1 << 4) /* B: LCD Data Bus Bit 2 */
+#define AT91_PB5_LCDD0 (1 << 5) /* A: LCD Data Bus Bit 0 */
+#define AT91_PB5_LCDD3 (1 << 5) /* B: LCD Data Bus Bit 3 */
+#define AT91_PB6_LCDD1 (1 << 6) /* A: LCD Data Bus Bit 1 */
+#define AT91_PB6_LCDD4 (1 << 6) /* B: LCD Data Bus Bit 4 */
+#define AT91_PB7_LCDD2 (1 << 7) /* A: LCD Data Bus Bit 2 */
+#define AT91_PB7_LCDD5 (1 << 7) /* B: LCD Data Bus Bit 5 */
+#define AT91_PB8_LCDD3 (1 << 8) /* A: LCD Data Bus Bit 3 */
+#define AT91_PB8_LCDD6 (1 << 8) /* B: LCD Data Bus Bit 6 */
+#define AT91_PB9_LCDD4 (1 << 9) /* A: LCD Data Bus Bit 4 */
+#define AT91_PB9_LCDD7 (1 << 9) /* B: LCD Data Bus Bit 7 */
+#define AT91_PB10_LCDD5 (1 << 10) /* A: LCD Data Bus Bit 5 */
+#define AT91_PB10_LCDD10 (1 << 10) /* B: LCD Data Bus Bit 10 */
+#define AT91_PB11_LCDD6 (1 << 11) /* A: LCD Data Bus Bit 6 */
+#define AT91_PB11_LCDD11 (1 << 11) /* B: LCD Data Bus Bit 11 */
+#define AT91_PB12_LCDD7 (1 << 12) /* A: LCD Data Bus Bit 7 */
+#define AT91_PB12_LCDD12 (1 << 12) /* B: LCD Data Bus Bit 12 */
+#define AT91_PB13_LCDD8 (1 << 13) /* A: LCD Data Bus Bit 8 */
+#define AT91_PB13_LCDD13 (1 << 13) /* B: LCD Data Bus Bit 13 */
+#define AT91_PB14_LCDD9 (1 << 14) /* A: LCD Data Bus Bit 9 */
+#define AT91_PB14_LCDD14 (1 << 14) /* B: LCD Data Bus Bit 14 */
+#define AT91_PB15_LCDD10 (1 << 15) /* A: LCD Data Bus Bit 10 */
+#define AT91_PB15_LCDD15 (1 << 15) /* B: LCD Data Bus Bit 15 */
+#define AT91_PB16_LCDD11 (1 << 16) /* A: LCD Data Bus Bit 11 */
+#define AT91_PB16_LCDD19 (1 << 16) /* B: LCD Data Bus Bit 19 */
+#define AT91_PB17_LCDD12 (1 << 17) /* A: LCD Data Bus Bit 12 */
+#define AT91_PB17_LCDD20 (1 << 17) /* B: LCD Data Bus Bit 20 */
+#define AT91_PB18_LCDD13 (1 << 18) /* A: LCD Data Bus Bit 13 */
+#define AT91_PB18_LCDD21 (1 << 18) /* B: LCD Data Bus Bit 21 */
+#define AT91_PB19_LCDD14 (1 << 19) /* A: LCD Data Bus Bit 14 */
+#define AT91_PB19_LCDD22 (1 << 19) /* B: LCD Data Bus Bit 22 */
+#define AT91_PB20_LCDD15 (1 << 20) /* A: LCD Data Bus Bit 15 */
+#define AT91_PB20_LCDD23 (1 << 20) /* B: LCD Data Bus Bit 23 */
+#define AT91_PB21_TF0 (1 << 21) /* A: SSC0 Transmit Frame Sync */
+#define AT91_PB21_LCDD16 (1 << 21) /* B: LCD Data Bus Bit 16 */
+#define AT91_PB22_TK0 (1 << 22) /* A: SSC0 Transmit Clock */
+#define AT91_PB22_LCDD17 (1 << 22) /* B: LCD Data Bus Bit 17 */
+#define AT91_PB23_TD0 (1 << 23) /* A: SSC0 Transmit Data */
+#define AT91_PB23_LCDD18 (1 << 23) /* B: LCD Data Bus Bit 18 */
+#define AT91_PB24_RD0 (1 << 24) /* A: SSC0 Receive Data */
+#define AT91_PB24_LCDD19 (1 << 24) /* B: LCD Data Bus Bit 19 */
+#define AT91_PB25_RK0 (1 << 25) /* A: SSC0 Receive Clock */
+#define AT91_PB25_LCDD20 (1 << 25) /* B: LCD Data Bus Bit 20 */
+#define AT91_PB26_RF0 (1 << 26) /* A: SSC0 Receive Frame Sync */
+#define AT91_PB26_LCDD21 (1 << 26) /* B: LCD Data Bus Bit 21 */
+#define AT91_PB27_SPI1_NPCS1 (1 << 27) /* A: SPI1 Peripheral Chip Select 1 */
+#define AT91_PB27_LCDD22 (1 << 27) /* B: LCD Data Bus Bit 22 */
+#define AT91_PB28_SPI1_NPCS0 (1 << 28) /* A: SPI1 Peripheral Chip Select 0 */
+#define AT91_PB28_LCDD23 (1 << 28) /* B: LCD Data Bus Bit 23 */
+#define AT91_PB29_SPI1_SPCK (1 << 29) /* A: SPI1 Serial Clock */
+#define AT91_PB29_IRQ2 (1 << 29) /* B: Interrupt input 2 */
+#define AT91_PB30_SPI1_MISO (1 << 30) /* A: SPI1 Master In Slave */
+#define AT91_PB30_IRQ1 (1 << 30) /* B: Interrupt input 1 */
+#define AT91_PB31_SPI1_MOSI (1 << 31) /* A: SPI1 Master Out Slave */
+#define AT91_PB31_PCK2 (1 << 31) /* B: PMC Programmable clock Output 2 */
+
+#define AT91_PC0_SMOE (1 << 0) /* A: SmartMedia Output Enable */
+#define AT91_PC0_NCS6 (1 << 0) /* B: Chip Select 6 */
+#define AT91_PC1_SMWE (1 << 1) /* A: SmartMedia Write Enable */
+#define AT91_PC1_NCS7 (1 << 1) /* B: Chip Select 7 */
+#define AT91_PC2_NWAIT (1 << 2) /* A: NWAIT */
+#define AT91_PC2_IRQ0 (1 << 2) /* B: Interrupt input 0 */
+#define AT91_PC3_A25_CFRNW (1 << 3) /* A: Address Bus[25] / Compact Flash Read Not Write */
+#define AT91_PC4_NCS4_CFCS0 (1 << 4) /* A: Chip Select 4 / CompactFlash Chip Select 0 */
+#define AT91_PC5_NCS5_CFCS1 (1 << 5) /* A: Chip Select 5 / CompactFlash Chip Select 1 */
+#define AT91_PC6_CFCE1 (1 << 6) /* A: CompactFlash Chip Enable 1 */
+#define AT91_PC7_CFCE2 (1 << 7) /* A: CompactFlash Chip Enable 2 */
+#define AT91_PC8_TXD0 (1 << 8) /* A: USART0 Transmit Data */
+#define AT91_PC8_PCK2 (1 << 8) /* B: PMC Programmable clock Output 2 */
+#define AT91_PC9_RXD0 (1 << 9) /* A: USART0 Receive Data */
+#define AT91_PC9_PCK3 (1 << 9) /* B: PMC Programmable clock Output 3 */
+#define AT91_PC10_RTS0 (1 << 10) /* A: USART0 Ready To Send */
+#define AT91_PC10_SCK0 (1 << 10) /* B: USART0 Serial Clock */
+#define AT91_PC11_CTS0 (1 << 11) /* A: USART0 Clear To Send */
+#define AT91_PC11_FIQ (1 << 11) /* B: AIC Fast Interrupt Input */
+#define AT91_PC12_TXD1 (1 << 12) /* A: USART1 Transmit Data */
+#define AT91_PC12_NCS6 (1 << 12) /* B: Chip Select 6 */
+#define AT91_PC13_RXD1 (1 << 13) /* A: USART1 Receive Data */
+#define AT91_PC13_NCS7 (1 << 13) /* B: Chip Select 7 */
+#define AT91_PC14_TXD2 (1 << 14) /* A: USART2 Transmit Data */
+#define AT91_PC14_SPI1_NPCS2 (1 << 14) /* B: SPI1 Peripheral Chip Select 2 */
+#define AT91_PC15_RXD2 (1 << 15) /* A: USART2 Receive Data */
+#define AT91_PC15_SPI1_NPCS3 (1 << 15) /* B: SPI1 Peripheral Chip Select 3 */
+#define AT91_PC16_D16 (1 << 16) /* A: Data Bus [16] */
+#define AT91_PC16_TCLK0 (1 << 16) /* B: Timer Counter 0 external clock input */
+#define AT91_PC17_D17 (1 << 17) /* A: Data Bus [17] */
+#define AT91_PC17_TCLK1 (1 << 17) /* B: Timer Counter 1 external clock input */
+#define AT91_PC18_D18 (1 << 18) /* A: Data Bus [18] */
+#define AT91_PC18_TCLK2 (1 << 18) /* B: Timer Counter 2 external clock input */
+#define AT91_PC19_D19 (1 << 19) /* A: Data Bus [19] */
+#define AT91_PC19_TIOA0 (1 << 19) /* B: Timer Counter 0 Multipurpose Timer I/O Pin A */
+#define AT91_PC20_D20 (1 << 20) /* A: Data Bus [20] */
+#define AT91_PC20_TIOB0 (1 << 20) /* B: Timer Counter 0 Multipurpose Timer I/O Pin B */
+#define AT91_PC21_D21 (1 << 21) /* A: Data Bus [21] */
+#define AT91_PC21_TIOA1 (1 << 21) /* B: Timer Counter 1 Multipurpose Timer I/O Pin A */
+#define AT91_PC22_D22 (1 << 22) /* A: Data Bus [22] */
+#define AT91_PC22_TIOB1 (1 << 22) /* B: Timer Counter 1 Multipurpose Timer I/O Pin B */
+#define AT91_PC23_D23 (1 << 23) /* A: Data Bus [23] */
+#define AT91_PC23_TIOA2 (1 << 23) /* B: Timer Counter 2 Multipurpose Timer I/O Pin A */
+#define AT91_PC24_D24 (1 << 24) /* A: Data Bus [24] */
+#define AT91_PC24_TIOB2 (1 << 24) /* B: Timer Counter 2 Multipurpose Timer I/O Pin B */
+#define AT91_PC25_D25 (1 << 25) /* A: Data Bus [25] */
+#define AT91_PC25_TF2 (1 << 25) /* B: SSC2 Transmit Frame Sync */
+#define AT91_PC26_D26 (1 << 26) /* A: Data Bus [26] */
+#define AT91_PC26_TK2 (1 << 26) /* B: SSC2 Transmit Clock */
+#define AT91_PC27_D27 (1 << 27) /* A: Data Bus [27] */
+#define AT91_PC27_TD2 (1 << 27) /* B: SSC2 Transmit Data */
+#define AT91_PC28_D28 (1 << 28) /* A: Data Bus [28] */
+#define AT91_PC28_RD2 (1 << 28) /* B: SSC2 Receive Data */
+#define AT91_PC29_D29 (1 << 29) /* A: Data Bus [29] */
+#define AT91_PC29_RK2 (1 << 29) /* B: SSC2 Receive Clock */
+#define AT91_PC30_D30 (1 << 30) /* A: Data Bus [30] */
+#define AT91_PC30_RF2 (1 << 30) /* B: SSC2 Receive Frame Sync */
+#define AT91_PC31_D31 (1 << 31) /* A: Data Bus [31] */
+#define AT91_PC31_PCK1 (1 << 31) /* B: PMC Programmable clock Output 1 */
+#endif
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91sam9261_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+
+#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_ITCM_64 (7 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+#define AT91_MATRIX_DTCM_64 (7 << 4)
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+
+#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */
+#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/at91sam926x_mc.h
+ *
+ * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM926x_MC_H
+#define AT91SAM926x_MC_H
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
+#define AT91_SDRAMC_MODE_NORMAL 0
+#define AT91_SDRAMC_MODE_NOP 1
+#define AT91_SDRAMC_MODE_PRECHARGE 2
+#define AT91_SDRAMC_MODE_LMR 3
+#define AT91_SDRAMC_MODE_REFRESH 4
+#define AT91_SDRAMC_MODE_EXT_LMR 5
+#define AT91_SDRAMC_MODE_DEEP 6
+
+#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
+#define AT91_SDRAMC_NC_8 (0 << 0)
+#define AT91_SDRAMC_NC_9 (1 << 0)
+#define AT91_SDRAMC_NC_10 (2 << 0)
+#define AT91_SDRAMC_NC_11 (3 << 0)
+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_SDRAMC_NR_11 (0 << 2)
+#define AT91_SDRAMC_NR_12 (1 << 2)
+#define AT91_SDRAMC_NR_13 (2 << 2)
+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
+#define AT91_SDRAMC_NB_2 (0 << 4)
+#define AT91_SDRAMC_NB_4 (1 << 4)
+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
+#define AT91_SDRAMC_CAS_1 (1 << 5)
+#define AT91_SDRAMC_CAS_2 (2 << 5)
+#define AT91_SDRAMC_CAS_3 (3 << 5)
+#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
+#define AT91_SDRAMC_DBW_32 (0 << 7)
+#define AT91_SDRAMC_DBW_16 (1 << 7)
+#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
+#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
+#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
+#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
+#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
+#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
+#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
+#define AT91_SDRAMC_LPCB_DISABLE 0
+#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
+#define AT91_SDRAMC_LPCB_POWER_DOWN 2
+#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
+#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
+#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
+#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */
+#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
+#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
+#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
+#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
+
+#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
+#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
+#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
+#define AT91_SDRAMC_MD_SDRAM 0
+#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
+
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
+#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
+#define AT91_SMC_NWESETUP_(x) ((x) << 0)
+#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
+#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
+#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
+#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
+#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
+#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
+
+#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
+#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
+#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
+#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
+#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
+#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
+#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
+#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
+#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
+#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
+#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
+#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
+
+#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
+#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
+#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
+#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
+#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
+#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
+#define AT91_SMC_EXNWMODE_READY (3 << 4)
+#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
+#define AT91_SMC_BAT_SELECT (0 << 8)
+#define AT91_SMC_BAT_WRITE (1 << 8)
+#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
+#define AT91_SMC_DBW_8 (0 << 12)
+#define AT91_SMC_DBW_16 (1 << 12)
+#define AT91_SMC_DBW_32 (2 << 12)
+#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
+#define AT91_SMC_TDF_(x) ((x) << 16)
+#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
+#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
+#define AT91_SMC_PS (3 << 28) /* Page Size */
+#define AT91_SMC_PS_4 (0 << 28)
+#define AT91_SMC_PS_8 (1 << 28)
+#define AT91_SMC_PS_16 (2 << 28)
+#define AT91_SMC_PS_32 (3 << 28)
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/board.h
+ *
+ * Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * These are data structures found in platform_device.dev.platform_data,
+ * and describing board-specific data needed by drivers. For example,
+ * which pin is used for a given GPIO role.
+ *
+ * In 2.6, drivers should strongly avoid board-specific knowledge so
+ * that supporting new boards normally won't require driver patches.
+ * Most board-specific knowledge should be in arch/.../board-*.c files.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/mtd/partitions.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+
+ /* USB Device */
+struct at91_udc_data {
+ u8 vbus_pin; /* high == host powering us */
+ u8 pullup_pin; /* high == D+ pulled up */
+};
+extern void __init at91_add_device_udc(struct at91_udc_data *data);
+
+ /* Compact Flash */
+struct at91_cf_data {
+ u8 irq_pin; /* I/O IRQ */
+ u8 det_pin; /* Card detect */
+ u8 vcc_pin; /* power switching */
+ u8 rst_pin; /* card reset */
+ u8 chipselect; /* EBI Chip Select number */
+};
+extern void __init at91_add_device_cf(struct at91_cf_data *data);
+
+ /* MMC / SD */
+struct at91_mmc_data {
+ u8 det_pin; /* card detect IRQ */
+ unsigned slot_b:1; /* uses Slot B */
+ unsigned wire4:1; /* (SD) supports DAT0..DAT3 */
+ u8 wp_pin; /* (SD) writeprotect detect */
+ u8 vcc_pin; /* power switching (high == on) */
+};
+extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
+
+ /* Ethernet */
+struct at91_eth_data {
+ u8 phy_irq_pin; /* PHY IRQ */
+ u8 is_rmii; /* using RMII interface? */
+};
+extern void __init at91_add_device_eth(struct at91_eth_data *data);
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
+#define eth_platform_data at91_eth_data
+#endif
+
+ /* USB Host */
+struct at91_usbh_data {
+ u8 ports; /* number of ports on root hub */
+};
+extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+
+ /* NAND / SmartMedia */
+struct at91_nand_data {
+ u8 enable_pin; /* chip enable */
+ u8 det_pin; /* card detect */
+ u8 rdy_pin; /* ready/busy */
+ u8 ale; /* address line number connected to ALE */
+ u8 cle; /* address line number connected to CLE */
+ u8 bus_width_16; /* buswidth is 16 bit */
+ struct mtd_partition* (*partition_info)(int, int*);
+};
+extern void __init at91_add_device_nand(struct at91_nand_data *data);
+
+ /* I2C*/
+extern void __init at91_add_device_i2c(void);
+
+ /* SPI */
+extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
+
+ /* Serial */
+struct at91_uart_config {
+ unsigned short console_tty; /* tty number of serial console */
+ unsigned short nr_tty; /* number of serial tty's */
+ short tty_map[]; /* map UART to tty number */
+};
+extern struct platform_device *atmel_default_console_device;
+extern void __init at91_init_serial(struct at91_uart_config *config);
+
+struct atmel_uart_data {
+ short use_dma_tx; /* use transmit DMA? */
+ short use_dma_rx; /* use receive DMA? */
+ void __iomem *regs; /* virtual base address, if any */
+};
+extern void __init at91_add_device_serial(void);
+
+ /* LEDs */
+extern u8 at91_leds_cpu;
+extern u8 at91_leds_timer;
+extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/cpu.h
+ *
+ * Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+
+#define ARCH_ID_AT91RM9200 0x09290780
+#define ARCH_ID_AT91SAM9260 0x019803a0
+#define ARCH_ID_AT91SAM9261 0x019703a0
+
+
+static inline unsigned long at91_cpu_identify(void)
+{
+ return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
+}
+
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#else
+#define cpu_is_at91rm9200() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9260
+#define cpu_is_at91sam9260() (at91_cpu_identify() == ARCH_ID_AT91SAM9260)
+#else
+#define cpu_is_at91sam9260() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9261
+#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261)
+#else
+#define cpu_is_at91sam9261() (0)
+#endif
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/debug-macro.S
+ *
+ * Copyright (C) 2003-2005 SAN People
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =AT91_BASE_SYS @ System peripherals (phys address)
+ ldrne \rx, =AT91_VA_BASE_SYS @ System peripherals (virt address)
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #AT91_DBGU_THR] @ Write to Transmitter Holding Register
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
+ tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
+ beq 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
+ tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
+ beq 1001b
+ .endm
+
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/dma.h
+ *
+ * Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/entry-macro.S
+ *
+ * Copyright (C) 2003-2005 SAN People
+ *
+ * Low-level IRQ helper macros for AT91RM9200 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_aic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =(AT91_VA_BASE_SYS) @ base virtual address of SYS peripherals
+ ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+ ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number
+ teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
+ streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now.
+ .endm
+
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/gpio.h
+ *
+ * Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
+#define __ASM_ARCH_AT91RM9200_GPIO_H
+
+#include <asm/irq.h>
+
+#define PIN_BASE NR_AIC_IRQS
+
+#define MAX_GPIO_BANKS 4
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0)
+#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1)
+#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
+#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
+#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
+
+#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
+#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
+#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
+#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
+#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
+
+#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
+#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
+#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
+#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
+#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
+
+#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
+#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
+#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
+#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
+#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
+
+#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
+#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
+#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
+#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
+#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
+
+#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
+#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
+#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
+#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
+#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
+
+#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
+#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
+
+#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0)
+#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1)
+#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
+#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
+#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
+
+#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
+#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
+#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
+#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
+#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
+
+#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
+#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
+#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
+#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
+#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
+
+#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
+#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
+#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
+#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
+#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
+
+#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
+#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
+#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
+#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
+#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
+
+#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
+#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
+#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
+#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
+#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
+
+#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
+#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
+
+#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0)
+#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1)
+#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
+#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
+#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
+
+#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
+#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
+#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
+#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
+#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
+
+#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
+#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
+#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
+#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
+#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
+
+#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
+#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
+#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
+#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
+#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
+
+#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
+#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
+#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
+#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
+#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
+
+#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
+#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
+#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
+#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
+#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
+
+#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
+#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
+
+#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0)
+#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1)
+#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
+#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
+#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
+
+#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
+#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
+#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
+#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
+#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
+
+#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
+#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
+#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
+#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
+#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
+
+#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
+#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
+#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
+#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
+#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
+
+#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
+#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
+#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
+#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
+#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
+
+#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
+#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
+#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
+#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
+#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
+
+#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
+#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
+
+#ifndef __ASSEMBLY__
+/* setup setup routines, called from board init or driver probe() */
+extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
+extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
+extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
+
+/* callable at any time */
+extern int at91_set_gpio_value(unsigned pin, int value);
+extern int at91_get_gpio_value(unsigned pin);
+
+/* callable only from core power-management code */
+extern void at91_gpio_suspend(void);
+extern void at91_gpio_resume(void);
+#endif
+
+#endif
+
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/hardware.h
+ *
+ * Copyright (C) 2003 SAN People
+ * Copyright (C) 2003 ATMEL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+#include <asm/arch/at91rm9200.h>
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+#include <asm/arch/at91sam9260.h>
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+#include <asm/arch/at91sam9261.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
+
+
+/*
+ * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
+ * to 0xFEFA0000 .. 0xFF000000. (384Kb)
+ */
+#define AT91_IO_PHYS_BASE 0xFFFA0000
+#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
+#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE)
+
+ /* Convert a physical IO address to virtual IO address */
+#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+
+/*
+ * Virtual to Physical Address mapping for IO devices.
+ */
+#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS)
+#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC)
+
+ /* Internal SRAM is mapped below the IO devices */
+#define AT91_SRAM_MAX SZ_1M
+#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
+
+/* Serial ports */
+#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */
+
+/* External Memory Map */
+#define AT91_CHIPSELECT_0 0x10000000
+#define AT91_CHIPSELECT_1 0x20000000
+#define AT91_CHIPSELECT_2 0x30000000
+#define AT91_CHIPSELECT_3 0x40000000
+#define AT91_CHIPSELECT_4 0x50000000
+#define AT91_CHIPSELECT_5 0x60000000
+#define AT91_CHIPSELECT_6 0x70000000
+#define AT91_CHIPSELECT_7 0x80000000
+
+/* SDRAM */
+#define AT91_SDRAM_BASE AT91_CHIPSELECT_1
+
+/* Clocks */
+#define AT91_SLOW_CLOCK 32768 /* slow clock */
+
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+
+static inline unsigned int at91_sys_read(unsigned int reg_offset)
+{
+ void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+ return __raw_readl(addr + reg_offset);
+}
+
+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
+{
+ void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+ __raw_writel(value, addr + reg_offset);
+}
+#endif
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/io.h
+ *
+ * Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <asm/io.h>
+
+#define IO_SPACE_LIMIT 0xFFFFFFFF
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/irqs.h
+ *
+ * Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <asm/arch/at91_aic.h>
+
+#define NR_AIC_IRQS 32
+
+
+/*
+ * Acknowledge interrupt with AIC after interrupt has been handled.
+ * (by kernel/irq.c)
+ */
+#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
+
+
+/*
+ * IRQ interrupt symbols are the AT91xxx_ID_* symbols
+ * for IRQs handled directly through the AIC, or else the AT91_PIN_*
+ * symbols in gpio.h for ones handled indirectly as GPIOs.
+ * We make provision for 4 banks of GPIO.
+ */
+#define NR_IRQS (NR_AIC_IRQS + (4 * 32))
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/memory.h
+ *
+ * Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/hardware.h>
+
+#define PHYS_OFFSET (AT91_SDRAM_BASE)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ * address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ * to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/system.h
+ *
+ * Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_st.h>
+#include <asm/arch/at91_dbgu.h>
+
+static inline void arch_idle(void)
+{
+ /*
+ * Disable the processor clock. The processor will be automatically
+ * re-enabled by an interrupt or by a reset.
+ */
+// at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+
+ /*
+ * Set the processor (CP15) into 'Wait for Interrupt' mode.
+ * Unlike disabling the processor clock via the PMC (above)
+ * this allows the processor to be woken via JTAG.
+ */
+ cpu_do_idle();
+}
+
+void (*at91_arch_reset)(void);
+
+static inline void arch_reset(char mode)
+{
+ /* call the CPU-specific reset function */
+ if (at91_arch_reset)
+ (at91_arch_reset)();
+}
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/timex.h
+ *
+ * Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#include <asm/hardware.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+
+#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
+
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
+
+#define AT91SAM9_MASTER_CLOCK 99300000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
+#endif
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/uncompress.h
+ *
+ * Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+ void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */
+
+ while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY))
+ barrier();
+ __raw_writel(c, sys + AT91_DBGU_THR);
+}
+
+static inline void flush(void)
+{
+ void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */
+
+ /* wait for transmission to complete */
+ while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY))
+ barrier();
+}
+
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif
--- /dev/null
+/*
+ * include/asm-arm/arch-at91/vmalloc.h
+ *
+ * Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK)
+
+#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_aic.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Advanced Interrupt Controller (AIC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_AIC_H
-#define AT91_AIC_H
-
-#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */
-#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
-#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
-#define AT91_AIC_SRCTYPE_LOW (0 << 5)
-#define AT91_AIC_SRCTYPE_FALLING (1 << 5)
-#define AT91_AIC_SRCTYPE_HIGH (2 << 5)
-#define AT91_AIC_SRCTYPE_RISING (3 << 5)
-
-#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
-#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */
-#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */
-#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */
-#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
-
-#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */
-#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */
-#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */
-#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
-#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
-
-#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */
-#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */
-#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */
-#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */
-#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */
-#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */
-#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */
-#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
-#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
-
-#define AT91_AIC_FFER (AT91_AIC + 0x140) /* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC_FFDR (AT91_AIC + 0x144) /* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC_FFSR (AT91_AIC + 0x148) /* Fast Forcing Status Register [SAM9 only] */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_dbgu.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Debug Unit (DBGU) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_DBGU_H
-#define AT91_DBGU_H
-
-#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */
-#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */
-#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */
-#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
-#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
-#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */
-#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */
-#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */
-#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */
-#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */
-#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */
-
-#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */
-#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */
-#define AT91_CIDR_VERSION (0x1f << 0) /* Version of the Device */
-#define AT91_CIDR_EPROC (7 << 5) /* Embedded Processor */
-#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
-#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
-#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
-#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
-#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
-#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
-
-#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */
-#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_ecc.h
- *
- * Error Corrected Code Controller (ECC) - System peripherals regsters.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef AT91_ECC_H
-#define AT91_ECC_H
-
-#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */
-#define AT91_ECC_RST (1 << 0) /* Reset parity */
-
-#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */
-#define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */
-#define AT91_ECC_PAGESIZE_528 (0)
-#define AT91_ECC_PAGESIZE_1056 (1)
-#define AT91_ECC_PAGESIZE_2112 (2)
-#define AT91_ECC_PAGESIZE_4224 (3)
-
-#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */
-#define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */
-#define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
-#define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */
-
-#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */
-#define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */
-#define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
-
-#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */
-#define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_lcdc.h
- *
- * LCD Controller (LCDC).
- * Based on AT91SAM9261 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_LCDC_H
-#define AT91_LCDC_H
-
-#define AT91_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */
-#define AT91_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */
-#define AT91_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */
-#define AT91_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */
-#define AT91_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */
-#define AT91_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */
-
-#define AT91_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */
-#define AT91_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */
-#define AT91_LCDC_BLENGTH (0x7f << 24) /* Burst Length */
-
-#define AT91_LCDC_DMACON 0x1c /* DMA Control Register */
-#define AT91_LCDC_DMAEN (0x1 << 0) /* DMA Enable */
-#define AT91_LCDC_DMARST (0x1 << 1) /* DMA Reset */
-#define AT91_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */
-
-#define AT91_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */
-#define AT91_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */
-#define AT91_LCDC_CLKVAL (0x1ff << 12) /* Clock Divider */
-#define AT91_LCDC_LINCNT (0x7ff << 21) /* Line Counter */
-
-#define AT91_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */
-#define AT91_LCDC_DISTYPE (3 << 0) /* Display Type */
-#define AT91_LCDC_DISTYPE_STNMONO (0 << 0)
-#define AT91_LCDC_DISTYPE_STNCOLOR (1 << 0)
-#define AT91_LCDC_DISTYPE_TFT (2 << 0)
-#define AT91_LCDC_SCANMOD (1 << 2) /* Scan Mode */
-#define AT91_LCDC_SCANMOD_SINGLE (0 << 2)
-#define AT91_LCDC_SCANMOD_DUAL (1 << 2)
-#define AT91_LCDC_IFWIDTH (3 << 3) /*Interface Width */
-#define AT91_LCDC_IFWIDTH_4 (0 << 3)
-#define AT91_LCDC_IFWIDTH_8 (1 << 3)
-#define AT91_LCDC_IFWIDTH_16 (2 << 3)
-#define AT91_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */
-#define AT91_LCDC_PIXELSIZE_1 (0 << 5)
-#define AT91_LCDC_PIXELSIZE_2 (1 << 5)
-#define AT91_LCDC_PIXELSIZE_4 (2 << 5)
-#define AT91_LCDC_PIXELSIZE_8 (3 << 5)
-#define AT91_LCDC_PIXELSIZE_16 (4 << 5)
-#define AT91_LCDC_PIXELSIZE_24 (5 << 5)
-#define AT91_LCDC_INVVD (1 << 8) /* LCD Data polarity */
-#define AT91_LCDC_INVVD_NORMAL (0 << 8)
-#define AT91_LCDC_INVVD_INVERTED (1 << 8)
-#define AT91_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */
-#define AT91_LCDC_INVFRAME_NORMAL (0 << 9)
-#define AT91_LCDC_INVFRAME_INVERTED (1 << 9)
-#define AT91_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */
-#define AT91_LCDC_INVLINE_NORMAL (0 << 10)
-#define AT91_LCDC_INVLINE_INVERTED (1 << 10)
-#define AT91_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */
-#define AT91_LCDC_INVCLK_NORMAL (0 << 11)
-#define AT91_LCDC_INVCLK_INVERTED (1 << 11)
-#define AT91_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */
-#define AT91_LCDC_INVDVAL_NORMAL (0 << 12)
-#define AT91_LCDC_INVDVAL_INVERTED (1 << 12)
-#define AT91_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */
-#define AT91_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
-#define AT91_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
-#define AT91_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */
-#define AT91_LCDC_MEMOR_BIG (0 << 31)
-#define AT91_LCDC_MEMOR_LITTLE (1 << 31)
-
-#define AT91_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */
-#define AT91_LCDC_VFP (0xff << 0) /* Vertical Front Porch */
-#define AT91_LCDC_VBP (0xff << 8) /* Vertical Back Porch */
-#define AT91_LCDC_VPW (0x3f << 16) /* Vertical Synchronization Pulse Width */
-#define AT91_LCDC_VHDLY (0xf << 24) /* Vertical to Horizontal Delay */
-
-#define AT91_LCDC_TIM2 0x080c /* LCD Timing Register 2 */
-#define AT91_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */
-#define AT91_LCDC_HPW (0x3f << 8) /* Horizontal Synchronization Pulse Width */
-#define AT91_LCDC_HFP (0x7ff << 21) /* Horizontal Front Porch */
-
-#define AT91_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */
-#define AT91_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */
-#define AT91_LCDC_HOZVAL (0x7ff << 21) /* Horizontal Size of LCD Module */
-
-#define AT91_LCDC_FIFO 0x0814 /* LCD FIFO Register */
-#define AT91_LCDC_FIFOTH (0xffff) /* FIFO Threshold */
-
-#define AT91_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */
-#define AT91_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */
-#define AT91_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */
-#define AT91_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */
-#define AT91_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */
-#define AT91_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */
-#define AT91_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */
-#define AT91_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */
-#define AT91_LCDC_DP1_2_VAL (0xff)
-#define AT91_LCDC_DP4_7_VAL (0xfffffff)
-#define AT91_LCDC_DP3_5_VAL (0xfffff)
-#define AT91_LCDC_DP2_3_VAL (0xfff)
-#define AT91_LCDC_DP5_7_VAL (0xfffffff)
-#define AT91_LCDC_DP3_4_VAL (0xffff)
-#define AT91_LCDC_DP4_5_VAL (0xfffff)
-#define AT91_LCDC_DP6_7_VAL (0xfffffff)
-
-#define AT91_LCDC_PWRCON 0x083c /* Power Control Register */
-#define AT91_LCDC_PWR (1 << 0) /* LCD Module Power Control */
-#define AT91_LCDC_GUARDT (0x7f << 1) /* Delay in Frame Period */
-#define AT91_LCDC_BUSY (1 << 31) /* LCD Busy */
-
-#define AT91_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */
-#define AT91_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */
-#define AT91_LCDC_PS_DIV1 (0 << 0)
-#define AT91_LCDC_PS_DIV2 (1 << 0)
-#define AT91_LCDC_PS_DIV4 (2 << 0)
-#define AT91_LCDC_PS_DIV8 (3 << 0)
-#define AT91_LCDC_POL (1 << 2) /* Polarity of output Pulse */
-#define AT91_LCDC_POL_NEGATIVE (0 << 2)
-#define AT91_LCDC_POL_POSITIVE (1 << 2)
-#define AT91_LCDC_ENA (1 << 3) /* PWM generator Control */
-#define AT91_LCDC_ENA_PWMDISABLE (0 << 3)
-#define AT91_LCDC_ENA_PWMENABLE (1 << 3)
-
-#define AT91_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */
-#define AT91_LCDC_CVAL (0xff) /* PWM compare value */
-
-#define AT91_LCDC_IER 0x0848 /* Interrupt Enable Register */
-#define AT91_LCDC_IDR 0x084c /* Interrupt Disable Register */
-#define AT91_LCDC_IMR 0x0850 /* Interrupt Mask Register */
-#define AT91_LCDC_ISR 0x0854 /* Interrupt Enable Register */
-#define AT91_LCDC_ICR 0x0858 /* Interrupt Clear Register */
-#define AT91_LCDC_LNI (1 << 0) /* Line Interrupt */
-#define AT91_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */
-#define AT91_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */
-#define AT91_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */
-#define AT91_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */
-#define AT91_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */
-
-#define AT91_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_mci.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * MultiMedia Card Interface (MCI) registers.
- * Based on AT91RM9200 datasheet revision F.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_MCI_H
-#define AT91_MCI_H
-
-#define AT91_MCI_CR 0x00 /* Control Register */
-#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */
-#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */
-#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */
-#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */
-#define AT91_MCI_SWRST (1 << 7) /* Software Reset */
-
-#define AT91_MCI_MR 0x04 /* Mode Register */
-#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */
-#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */
-#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */
-#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */
-#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */
-
-#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */
-#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */
-#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */
-#define AT91_MCI_DTOMUL_1 (0 << 4)
-#define AT91_MCI_DTOMUL_16 (1 << 4)
-#define AT91_MCI_DTOMUL_128 (2 << 4)
-#define AT91_MCI_DTOMUL_256 (3 << 4)
-#define AT91_MCI_DTOMUL_1K (4 << 4)
-#define AT91_MCI_DTOMUL_4K (5 << 4)
-#define AT91_MCI_DTOMUL_64K (6 << 4)
-#define AT91_MCI_DTOMUL_1M (7 << 4)
-
-#define AT91_MCI_SDCR 0x0c /* SD Card Register */
-#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */
-#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */
-
-#define AT91_MCI_ARGR 0x10 /* Argument Register */
-
-#define AT91_MCI_CMDR 0x14 /* Command Register */
-#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */
-#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */
-#define AT91_MCI_RSPTYP_NONE (0 << 6)
-#define AT91_MCI_RSPTYP_48 (1 << 6)
-#define AT91_MCI_RSPTYP_136 (2 << 6)
-#define AT91_MCI_SPCMD (7 << 8) /* Special Command */
-#define AT91_MCI_SPCMD_NONE (0 << 8)
-#define AT91_MCI_SPCMD_INIT (1 << 8)
-#define AT91_MCI_SPCMD_SYNC (2 << 8)
-#define AT91_MCI_SPCMD_ICMD (4 << 8)
-#define AT91_MCI_SPCMD_IRESP (5 << 8)
-#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */
-#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */
-#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */
-#define AT91_MCI_TRCMD_NONE (0 << 16)
-#define AT91_MCI_TRCMD_START (1 << 16)
-#define AT91_MCI_TRCMD_STOP (2 << 16)
-#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */
-#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */
-#define AT91_MCI_TRTYP_BLOCK (0 << 19)
-#define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
-#define AT91_MCI_TRTYP_STREAM (2 << 19)
-
-#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */
-#define AT91_MCR_RDR 0x30 /* Receive Data Register */
-#define AT91_MCR_TDR 0x34 /* Transmit Data Register */
-
-#define AT91_MCI_SR 0x40 /* Status Register */
-#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */
-#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */
-#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */
-#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */
-#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */
-#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */
-#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */
-#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */
-#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */
-#define At91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B [AT91RM9200 only] */
-#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */
-#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */
-#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */
-#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */
-#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */
-#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */
-#define AT91_MCI_RTOE (1 << 20) /* Reponse Time-out Error */
-#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */
-#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */
-#define AT91_MCI_OVRE (1 << 30) /* Overrun */
-#define AT91_MCI_UNRE (1 << 31) /* Underrun */
-
-#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */
-#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */
-#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
-#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
-#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
-#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
-#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
-#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
-#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
-#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
-#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
-#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
-#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_pio.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Parallel I/O Controller (PIO) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIO_H
-#define AT91_PIO_H
-
-#define PIO_PER 0x00 /* Enable Register */
-#define PIO_PDR 0x04 /* Disable Register */
-#define PIO_PSR 0x08 /* Status Register */
-#define PIO_OER 0x10 /* Output Enable Register */
-#define PIO_ODR 0x14 /* Output Disable Register */
-#define PIO_OSR 0x18 /* Output Status Register */
-#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
-#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
-#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
-#define PIO_SODR 0x30 /* Set Output Data Register */
-#define PIO_CODR 0x34 /* Clear Output Data Register */
-#define PIO_ODSR 0x38 /* Output Data Status Register */
-#define PIO_PDSR 0x3c /* Pin Data Status Register */
-#define PIO_IER 0x40 /* Interrupt Enable Register */
-#define PIO_IDR 0x44 /* Interrupt Disable Register */
-#define PIO_IMR 0x48 /* Interrupt Mask Register */
-#define PIO_ISR 0x4c /* Interrupt Status Register */
-#define PIO_MDER 0x50 /* Multi-driver Enable Register */
-#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
-#define PIO_MDSR 0x58 /* Multi-driver Status Register */
-#define PIO_PUDR 0x60 /* Pull-up Disable Register */
-#define PIO_PUER 0x64 /* Pull-up Enable Register */
-#define PIO_PUSR 0x68 /* Pull-up Status Register */
-#define PIO_ASR 0x70 /* Peripheral A Select Register */
-#define PIO_BSR 0x74 /* Peripheral B Select Register */
-#define PIO_ABSR 0x78 /* AB Status Register */
-#define PIO_OWER 0xa0 /* Output Write Enable Register */
-#define PIO_OWDR 0xa4 /* Output Write Disable Register */
-#define PIO_OWSR 0xa8 /* Output Write Status Register */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_pit.h
- *
- * Periodic Interval Timer (PIT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIT_H
-#define AT91_PIT_H
-
-#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */
-#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
-#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */
-#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */
-
-#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */
-#define AT91_PIT_PITS (1 << 0) /* Timer Status */
-
-#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */
-#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */
-#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */
-#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_pmc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Power Management Controller (PMC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PMC_H
-#define AT91_PMC_H
-
-#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
-#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
-
-#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
-#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
-#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
-#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
-#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
-#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
-#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
-#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
-#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
-#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
-#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
-#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
-
-#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
-#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
-#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-
-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
-#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
-#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
-#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
-
-#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
-#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
-#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
-
-#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
-#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
-#define AT91_PMC_DIV (0xff << 0) /* Divider */
-#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
-#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
-#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
-#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
-
-#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
-#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
-#define AT91_PMC_CSS_SLOW (0 << 0)
-#define AT91_PMC_CSS_MAIN (1 << 0)
-#define AT91_PMC_CSS_PLLA (2 << 0)
-#define AT91_PMC_CSS_PLLB (3 << 0)
-#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
-#define AT91_PMC_PRES_1 (0 << 2)
-#define AT91_PMC_PRES_2 (1 << 2)
-#define AT91_PMC_PRES_4 (2 << 2)
-#define AT91_PMC_PRES_8 (3 << 2)
-#define AT91_PMC_PRES_16 (4 << 2)
-#define AT91_PMC_PRES_32 (5 << 2)
-#define AT91_PMC_PRES_64 (6 << 2)
-#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
-#define AT91_PMC_MDIV_1 (0 << 8)
-#define AT91_PMC_MDIV_2 (1 << 8)
-#define AT91_PMC_MDIV_3 (2 << 8)
-#define AT91_PMC_MDIV_4 (3 << 8)
-
-#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
-
-#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
-#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
-#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
-#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
-#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
-#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
-#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
-#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
-#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
-#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
-#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_rstc.h
- *
- * Reset Controller (RSTC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RSTC_H
-#define AT91_RSTC_H
-
-#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */
-#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
-#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
-#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
-#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
-
-#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
-#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
-#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */
-#define AT91_RSTC_RSTTYP_GENERAL (0 << 8)
-#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8)
-#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8)
-#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8)
-#define AT91_RSTC_RSTTYP_USER (4 << 8)
-#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */
-#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */
-
-#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */
-#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
-#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
-#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
-#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_rtc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Real Time Clock (RTC) - System peripheral registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTC_H
-#define AT91_RTC_H
-
-#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */
-#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */
-#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */
-#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */
-#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8)
-#define AT91_RTC_TIMEVSEL_HOUR (1 << 8)
-#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8)
-#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8)
-#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */
-#define AT91_RTC_CALEVSEL_WEEK (0 << 16)
-#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
-#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
-
-#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */
-#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
-
-#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */
-#define AT91_RTC_SEC (0x7f << 0) /* Current Second */
-#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */
-#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
-#define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */
-
-#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */
-#define AT91_RTC_CENT (0x7f << 0) /* Current Century */
-#define AT91_RTC_YEAR (0xff << 8) /* Current Year */
-#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */
-#define AT91_RTC_DAY (7 << 21) /* Current Day */
-#define AT91_RTC_DATE (0x3f << 24) /* Current Date */
-
-#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */
-#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */
-#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */
-#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */
-
-#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */
-#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */
-#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */
-
-#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */
-#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */
-#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */
-#define AT91_RTC_SECEV (1 << 2) /* Second Event */
-#define AT91_RTC_TIMEV (1 << 3) /* Time Event */
-#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */
-
-#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */
-#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */
-#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */
-#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */
-
-#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */
-#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
-#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */
-#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */
-#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_rtt.h
- *
- * Real-time Timer (RTT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTT_H
-#define AT91_RTT_H
-
-#define AT91_RTT_MR (AT91_RTT + 0x00) /* Real-time Mode Register */
-#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
-#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
-#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
-#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
-
-#define AT91_RTT_AR (AT91_RTT + 0x04) /* Real-time Alarm Register */
-#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
-
-#define AT91_RTT_VR (AT91_RTT + 0x08) /* Real-time Value Register */
-#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
-
-#define AT91_RTT_SR (AT91_RTT + 0x0c) /* Real-time Status Register */
-#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
-#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_shdwc.h
- *
- * Shutdown Controller (SHDWC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SHDWC_H
-#define AT91_SHDWC_H
-
-#define AT91_SHDW_CR (AT91_SHDWC + 0x00) /* Shut Down Control Register */
-#define AT91_SHDW_SHDW (1 << 0) /* Processor Reset */
-#define AT91_SHDW_KEY (0xff << 24) /* KEY Password */
-
-#define AT91_SHDW_MR (AT91_SHDWC + 0x04) /* Shut Down Mode Register */
-#define AT91_SHDW_WKMODE0 (3 << 0) /* Wake-up 0 Mode Selection */
-#define AT91_SHDW_WKMODE0_NONE 0
-#define AT91_SHDW_WKMODE0_HIGH 1
-#define AT91_SHDW_WKMODE0_LOW 2
-#define AT91_SHDW_WKMODE0_ANYLEVEL 3
-#define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */
-#define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */
-
-#define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */
-#define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */
-#define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_spi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Serial Peripheral Interface (SPI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SPI_H
-#define AT91_SPI_H
-
-#define AT91_SPI_CR 0x00 /* Control Register */
-#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */
-#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */
-#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */
-#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_MR 0x04 /* Mode Register */
-#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */
-#define AT91_SPI_PS (1 << 1) /* Peripheral Select */
-#define AT91_SPI_PS_FIXED (0 << 1)
-#define AT91_SPI_PS_VARIABLE (1 << 1)
-#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */
-#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */
-#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */
-#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */
-#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */
-
-#define AT91_SPI_RDR 0x08 /* Receive Data Register */
-#define AT91_SPI_RD (0xffff << 0) /* Receive Data */
-#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-
-#define AT91_SPI_TDR 0x0c /* Transmit Data Register */
-#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */
-#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */
-#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_SR 0x10 /* Status Register */
-#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */
-#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */
-#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */
-#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */
-#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */
-#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */
-#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */
-#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */
-#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */
-#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */
-#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */
-
-#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */
-#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */
-#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */
-
-#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */
-#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */
-#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */
-#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */
-#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */
-#define AT91_SPI_BITS_8 (0 << 4)
-#define AT91_SPI_BITS_9 (1 << 4)
-#define AT91_SPI_BITS_10 (2 << 4)
-#define AT91_SPI_BITS_11 (3 << 4)
-#define AT91_SPI_BITS_12 (4 << 4)
-#define AT91_SPI_BITS_13 (5 << 4)
-#define AT91_SPI_BITS_14 (6 << 4)
-#define AT91_SPI_BITS_15 (7 << 4)
-#define AT91_SPI_BITS_16 (8 << 4)
-#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */
-#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */
-#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_ssc.h
- *
- * Copyright (C) SAN People
- *
- * Serial Synchronous Controller (SSC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SSC_H
-#define AT91_SSC_H
-
-#define AT91_SSC_CR 0x00 /* Control Register */
-#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */
-#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */
-#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */
-#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */
-#define AT91_SSC_SWRST (1 << 15) /* Software Reset */
-
-#define AT91_SSC_CMR 0x04 /* Clock Mode Register */
-#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */
-
-#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */
-#define AT91_SSC_CKS (3 << 0) /* Clock Selection */
-#define AT91_SSC_CKS_DIV (0 << 0)
-#define AT91_SSC_CKS_CLOCK (1 << 0)
-#define AT91_SSC_CKS_PIN (2 << 0)
-#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */
-#define AT91_SSC_CKO_NONE (0 << 2)
-#define AT91_SSC_CKO_CONTINUOUS (1 << 2)
-#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */
-#define AT91_SSC_CKI_FALLING (0 << 5)
-#define AT91_SSC_CK_RISING (1 << 5)
-#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */
-#define AT91_SSC_CKG_NONE (0 << 6)
-#define AT91_SSC_CKG_RFLOW (1 << 6)
-#define AT91_SSC_CKG_RFHIGH (2 << 6)
-#define AT91_SSC_START (0xf << 8) /* Start Selection */
-#define AT91_SSC_START_CONTINUOUS (0 << 8)
-#define AT91_SSC_START_TX_RX (1 << 8)
-#define AT91_SSC_START_LOW_RF (2 << 8)
-#define AT91_SSC_START_HIGH_RF (3 << 8)
-#define AT91_SSC_START_FALLING_RF (4 << 8)
-#define AT91_SSC_START_RISING_RF (5 << 8)
-#define AT91_SSC_START_LEVEL_RF (6 << 8)
-#define AT91_SSC_START_EDGE_RF (7 << 8)
-#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */
-#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */
-#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */
-
-#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */
-#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */
-#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */
-#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */
-#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */
-#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */
-#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */
-#define AT91_SSC_FSOS_NONE (0 << 20)
-#define AT91_SSC_FSOS_NEGATIVE (1 << 20)
-#define AT91_SSC_FSOS_POSITIVE (2 << 20)
-#define AT91_SSC_FSOS_LOW (3 << 20)
-#define AT91_SSC_FSOS_HIGH (4 << 20)
-#define AT91_SSC_FSOS_TOGGLE (5 << 20)
-#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */
-#define AT91_SSC_FSEDGE_POSITIVE (0 << 24)
-#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24)
-
-#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */
-#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */
-#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */
-#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */
-
-#define AT91_SSC_RHR 0x20 /* Receive Holding Register */
-#define AT91_SSC_THR 0x24 /* Transmit Holding Register */
-#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */
-#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */
-
-#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */
-#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */
-
-#define AT91_SSC_SR 0x40 /* Status Register */
-#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */
-#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */
-#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */
-#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */
-#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */
-#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */
-#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */
-#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */
-#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */
-#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */
-#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */
-#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */
-#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */
-#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */
-
-#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */
-#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */
-#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_st.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * System Timer (ST) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ST_H
-#define AT91_ST_H
-
-#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */
-#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */
-
-#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */
-#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */
-
-#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */
-#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */
-#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */
-#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */
-
-#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */
-#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */
-
-#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */
-#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */
-#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */
-#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */
-#define AT91_ST_ALMS (1 << 3) /* Alarm Status */
-
-#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */
-#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */
-#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */
-
-#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */
-#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */
-
-#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */
-#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_tc.h
- *
- * Copyright (C) SAN People
- *
- * Timer/Counter Unit (TC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TC_H
-#define AT91_TC_H
-
-#define AT91_TC_BCR 0xc0 /* TC Block Control Register */
-#define AT91_TC_SYNC (1 << 0) /* Synchro Command */
-
-#define AT91_TC_BMR 0xc4 /* TC Block Mode Register */
-#define AT91_TC_TC0XC0S (3 << 0) /* External Clock Signal 0 Selection */
-#define AT91_TC_TC0XC0S_TCLK0 (0 << 0)
-#define AT91_TC_TC0XC0S_NONE (1 << 0)
-#define AT91_TC_TC0XC0S_TIOA1 (2 << 0)
-#define AT91_TC_TC0XC0S_TIOA2 (3 << 0)
-#define AT91_TC_TC1XC1S (3 << 2) /* External Clock Signal 1 Selection */
-#define AT91_TC_TC1XC1S_TCLK1 (0 << 2)
-#define AT91_TC_TC1XC1S_NONE (1 << 2)
-#define AT91_TC_TC1XC1S_TIOA0 (2 << 2)
-#define AT91_TC_TC1XC1S_TIOA2 (3 << 2)
-#define AT91_TC_TC2XC2S (3 << 4) /* External Clock Signal 2 Selection */
-#define AT91_TC_TC2XC2S_TCLK2 (0 << 4)
-#define AT91_TC_TC2XC2S_NONE (1 << 4)
-#define AT91_TC_TC2XC2S_TIOA0 (2 << 4)
-#define AT91_TC_TC2XC2S_TIOA1 (3 << 4)
-
-
-#define AT91_TC_CCR 0x00 /* Channel Control Register */
-#define AT91_TC_CLKEN (1 << 0) /* Counter Clock Enable Command */
-#define AT91_TC_CLKDIS (1 << 1) /* Counter CLock Disable Command */
-#define AT91_TC_SWTRG (1 << 2) /* Software Trigger Command */
-
-#define AT91_TC_CMR 0x04 /* Channel Mode Register */
-#define AT91_TC_TCCLKS (7 << 0) /* Capture/Waveform Mode: Clock Selection */
-#define AT91_TC_TIMER_CLOCK1 (0 << 0)
-#define AT91_TC_TIMER_CLOCK2 (1 << 0)
-#define AT91_TC_TIMER_CLOCK3 (2 << 0)
-#define AT91_TC_TIMER_CLOCK4 (3 << 0)
-#define AT91_TC_TIMER_CLOCK5 (4 << 0)
-#define AT91_TC_XC0 (5 << 0)
-#define AT91_TC_XC1 (6 << 0)
-#define AT91_TC_XC2 (7 << 0)
-#define AT91_TC_CLKI (1 << 3) /* Capture/Waveform Mode: Clock Invert */
-#define AT91_TC_BURST (3 << 4) /* Capture/Waveform Mode: Burst Signal Selection */
-#define AT91_TC_LDBSTOP (1 << 6) /* Capture Mode: Counter Clock Stopped with TB Loading */
-#define AT91_TC_LDBDIS (1 << 7) /* Capture Mode: Counter Clock Disable with RB Loading */
-#define AT91_TC_ETRGEDG (3 << 8) /* Capture Mode: External Trigger Edge Selection */
-#define AT91_TC_ABETRG (1 << 10) /* Capture Mode: TIOA or TIOB External Trigger Selection */
-#define AT91_TC_CPCTRG (1 << 14) /* Capture Mode: RC Compare Trigger Enable */
-#define AT91_TC_WAVE (1 << 15) /* Capture/Waveform mode */
-#define AT91_TC_LDRA (3 << 16) /* Capture Mode: RA Loading Selection */
-#define AT91_TC_LDRB (3 << 18) /* Capture Mode: RB Loading Selection */
-
-#define AT91_TC_CPCSTOP (1 << 6) /* Waveform Mode: Counter Clock Stopped with RC Compare */
-#define AT91_TC_CPCDIS (1 << 7) /* Waveform Mode: Counter Clock Disable with RC Compare */
-#define AT91_TC_EEVTEDG (3 << 8) /* Waveform Mode: External Event Edge Selection */
-#define AT91_TC_EEVTEDG_NONE (0 << 8)
-#define AT91_TC_EEVTEDG_RISING (1 << 8)
-#define AT91_TC_EEVTEDG_FALLING (2 << 8)
-#define AT91_TC_EEVTEDG_BOTH (3 << 8)
-#define AT91_TC_EEVT (3 << 10) /* Waveform Mode: External Event Selection */
-#define AT91_TC_EEVT_TIOB (0 << 10)
-#define AT91_TC_EEVT_XC0 (1 << 10)
-#define AT91_TC_EEVT_XC1 (2 << 10)
-#define AT91_TC_EEVT_XC2 (3 << 10)
-#define AT91_TC_ENETRG (1 << 12) /* Waveform Mode: External Event Trigger Enable */
-#define AT91_TC_WAVESEL (3 << 13) /* Waveform Mode: Waveform Selection */
-#define AT91_TC_WAVESEL_UP (0 << 13)
-#define AT91_TC_WAVESEL_UP_AUTO (2 << 13)
-#define AT91_TC_WAVESEL_UPDOWN (1 << 13)
-#define AT91_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
-#define AT91_TC_ACPA (3 << 16) /* Waveform Mode: RA Compare Effect on TIOA */
-#define AT91_TC_ACPA_NONE (0 << 16)
-#define AT91_TC_ACPA_SET (1 << 16)
-#define AT91_TC_ACPA_CLEAR (2 << 16)
-#define AT91_TC_ACPA_TOGGLE (3 << 16)
-#define AT91_TC_ACPC (3 << 18) /* Waveform Mode: RC Compre Effect on TIOA */
-#define AT91_TC_ACPC_NONE (0 << 18)
-#define AT91_TC_ACPC_SET (1 << 18)
-#define AT91_TC_ACPC_CLEAR (2 << 18)
-#define AT91_TC_ACPC_TOGGLE (3 << 18)
-#define AT91_TC_AEEVT (3 << 20) /* Waveform Mode: External Event Effect on TIOA */
-#define AT91_TC_AEEVT_NONE (0 << 20)
-#define AT91_TC_AEEVT_SET (1 << 20)
-#define AT91_TC_AEEVT_CLEAR (2 << 20)
-#define AT91_TC_AEEVT_TOGGLE (3 << 20)
-#define AT91_TC_ASWTRG (3 << 22) /* Waveform Mode: Software Trigger Effect on TIOA */
-#define AT91_TC_ASWTRG_NONE (0 << 22)
-#define AT91_TC_ASWTRG_SET (1 << 22)
-#define AT91_TC_ASWTRG_CLEAR (2 << 22)
-#define AT91_TC_ASWTRG_TOGGLE (3 << 22)
-#define AT91_TC_BCPB (3 << 24) /* Waveform Mode: RB Compare Effect on TIOB */
-#define AT91_TC_BCPB_NONE (0 << 24)
-#define AT91_TC_BCPB_SET (1 << 24)
-#define AT91_TC_BCPB_CLEAR (2 << 24)
-#define AT91_TC_BCPB_TOGGLE (3 << 24)
-#define AT91_TC_BCPC (3 << 26) /* Waveform Mode: RC Compare Effect on TIOB */
-#define AT91_TC_BCPC_NONE (0 << 26)
-#define AT91_TC_BCPC_SET (1 << 26)
-#define AT91_TC_BCPC_CLEAR (2 << 26)
-#define AT91_TC_BCPC_TOGGLE (3 << 26)
-#define AT91_TC_BEEVT (3 << 28) /* Waveform Mode: External Event Effect on TIOB */
-#define AT91_TC_BEEVT_NONE (0 << 28)
-#define AT91_TC_BEEVT_SET (1 << 28)
-#define AT91_TC_BEEVT_CLEAR (2 << 28)
-#define AT91_TC_BEEVT_TOGGLE (3 << 28)
-#define AT91_TC_BSWTRG (3 << 30) /* Waveform Mode: Software Trigger Effect on TIOB */
-#define AT91_TC_BSWTRG_NONE (0 << 30)
-#define AT91_TC_BSWTRG_SET (1 << 30)
-#define AT91_TC_BSWTRG_CLEAR (2 << 30)
-#define AT91_TC_BSWTRG_TOGGLE (3 << 30)
-
-#define AT91_TC_CV 0x10 /* Counter Value */
-#define AT91_TC_RA 0x14 /* Register A */
-#define AT91_TC_RB 0x18 /* Register B */
-#define AT91_TC_RC 0x1c /* Register C */
-
-#define AT91_TC_SR 0x20 /* Status Register */
-#define AT91_TC_COVFS (1 << 0) /* Counter Overflow Status */
-#define AT91_TC_LOVRS (1 << 1) /* Load Overrun Status */
-#define AT91_TC_CPAS (1 << 2) /* RA Compare Status */
-#define AT91_TC_CPBS (1 << 3) /* RB Compare Status */
-#define AT91_TC_CPCS (1 << 4) /* RC Compare Status */
-#define AT91_TC_LDRAS (1 << 5) /* RA Loading Status */
-#define AT91_TC_LDRBS (1 << 6) /* RB Loading Status */
-#define AT91_TC_ETRGS (1 << 7) /* External Trigger Status */
-#define AT91_TC_CLKSTA (1 << 16) /* Clock Enabling Status */
-#define AT91_TC_MTIOA (1 << 17) /* TIOA Mirror */
-#define AT91_TC_MTIOB (1 << 18) /* TIOB Mirror */
-
-#define AT91_TC_IER 0x24 /* Interrupt Enable Register */
-#define AT91_TC_IDR 0x28 /* Interrupt Disable Register */
-#define AT91_TC_IMR 0x2c /* Interrupt Mask Register */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_twi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Two-wire Interface (TWI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TWI_H
-#define AT91_TWI_H
-
-#define AT91_TWI_CR 0x00 /* Control Register */
-#define AT91_TWI_START (1 << 0) /* Send a Start Condition */
-#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */
-#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */
-#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */
-#define AT91_TWI_SWRST (1 << 7) /* Software Reset */
-
-#define AT91_TWI_MMR 0x04 /* Master Mode Register */
-#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */
-#define AT91_TWI_IADRSZ_NO (0 << 8)
-#define AT91_TWI_IADRSZ_1 (1 << 8)
-#define AT91_TWI_IADRSZ_2 (2 << 8)
-#define AT91_TWI_IADRSZ_3 (3 << 8)
-#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */
-#define AT91_TWI_DADR (0x7f << 16) /* Device Address */
-
-#define AT91_TWI_IADR 0x0c /* Internal Address Register */
-
-#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */
-#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */
-#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */
-#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */
-
-#define AT91_TWI_SR 0x20 /* Status Register */
-#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */
-#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */
-#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */
-#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */
-#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */
-#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */
-
-#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */
-#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */
-#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */
-#define AT91_TWI_RHR 0x30 /* Receive Holding Register */
-#define AT91_TWI_THR 0x34 /* Transmit Holding Register */
-
-#endif
-
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91_wdt.h
- *
- * Watchdog Timer (WDT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_WDT_H
-#define AT91_WDT_H
-
-#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */
-#define AT91_WDT_WDRSTT (1 << 0) /* Restart */
-#define AT91_WDT_KEY (0xff << 24) /* KEY Password */
-
-#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */
-#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */
-#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */
-#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */
-#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */
-#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */
-#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */
-#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */
-#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */
-
-#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */
-#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */
-#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_H
-#define AT91RM9200_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripheral */
-#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */
-#define AT91RM9200_ID_US0 6 /* USART 0 */
-#define AT91RM9200_ID_US1 7 /* USART 1 */
-#define AT91RM9200_ID_US2 8 /* USART 2 */
-#define AT91RM9200_ID_US3 9 /* USART 3 */
-#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */
-#define AT91RM9200_ID_UDP 11 /* USB Device Port */
-#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */
-#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */
-#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */
-#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */
-#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */
-#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */
-#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */
-#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */
-#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */
-#define AT91RM9200_ID_UHP 23 /* USB Host port */
-#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */
-#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */
-#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */
-#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */
-#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */
-#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */
-
-
-/*
- * Peripheral physical base addresses.
- */
-#define AT91RM9200_BASE_TCB0 0xfffa0000
-#define AT91RM9200_BASE_TC0 0xfffa0000
-#define AT91RM9200_BASE_TC1 0xfffa0040
-#define AT91RM9200_BASE_TC2 0xfffa0080
-#define AT91RM9200_BASE_TCB1 0xfffa4000
-#define AT91RM9200_BASE_TC3 0xfffa4000
-#define AT91RM9200_BASE_TC4 0xfffa4040
-#define AT91RM9200_BASE_TC5 0xfffa4080
-#define AT91RM9200_BASE_UDP 0xfffb0000
-#define AT91RM9200_BASE_MCI 0xfffb4000
-#define AT91RM9200_BASE_TWI 0xfffb8000
-#define AT91RM9200_BASE_EMAC 0xfffbc000
-#define AT91RM9200_BASE_US0 0xfffc0000
-#define AT91RM9200_BASE_US1 0xfffc4000
-#define AT91RM9200_BASE_US2 0xfffc8000
-#define AT91RM9200_BASE_US3 0xfffcc000
-#define AT91RM9200_BASE_SSC0 0xfffd0000
-#define AT91RM9200_BASE_SSC1 0xfffd4000
-#define AT91RM9200_BASE_SSC2 0xfffd8000
-#define AT91RM9200_BASE_SPI 0xfffe0000
-#define AT91_BASE_SYS 0xfffff000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) /* Advanced Interrupt Controller */
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) /* Debug Unit */
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) /* PIO Controller A */
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) /* PIO Controller B */
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) /* PIO Controller C */
-#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS) /* PIO Controller D */
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) /* Power Management Controller */
-#define AT91_ST (0xfffffd00 - AT91_BASE_SYS) /* System Timer */
-#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS) /* Real-Time Clock */
-#define AT91_MC (0xffffff00 - AT91_BASE_SYS) /* Memory Controllers */
-
-#define AT91_MATRIX 0 /* not supported */
-
-/*
- * Internal Memory.
- */
-#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
-
-#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */
-#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
-
-#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */
-
-
-#if 0
-/*
- * PIO pin definitions (peripheral A/B multiplexing).
- */
-#define AT91_PA0_MISO (1 << 0) /* A: SPI Master-In Slave-Out */
-#define AT91_PA0_PCK3 (1 << 0) /* B: PMC Programmable Clock Output 3 */
-#define AT91_PA1_MOSI (1 << 1) /* A: SPI Master-Out Slave-In */
-#define AT91_PA1_PCK0 (1 << 1) /* B: PMC Programmable Clock Output 0 */
-#define AT91_PA2_SPCK (1 << 2) /* A: SPI Serial Clock */
-#define AT91_PA2_IRQ4 (1 << 2) /* B: External Interrupt 4 */
-#define AT91_PA3_NPCS0 (1 << 3) /* A: SPI Peripheral Chip Select 0 */
-#define AT91_PA3_IRQ5 (1 << 3) /* B: External Interrupt 5 */
-#define AT91_PA4_NPCS1 (1 << 4) /* A: SPI Peripheral Chip Select 1 */
-#define AT91_PA4_PCK1 (1 << 4) /* B: PMC Programmable Clock Output 1 */
-#define AT91_PA5_NPCS2 (1 << 5) /* A: SPI Peripheral Chip Select 2 */
-#define AT91_PA5_TXD3 (1 << 5) /* B: USART Transmit Data 3 */
-#define AT91_PA6_NPCS3 (1 << 6) /* A: SPI Peripheral Chip Select 3 */
-#define AT91_PA6_RXD3 (1 << 6) /* B: USART Receive Data 3 */
-#define AT91_PA7_ETXCK_EREFCK (1 << 7) /* A: Ethernet Reference Clock / Transmit Clock */
-#define AT91_PA7_PCK2 (1 << 7) /* B: PMC Programmable Clock Output 2 */
-#define AT91_PA8_ETXEN (1 << 8) /* A: Ethernet Transmit Enable */
-#define AT91_PA8_MCCDB (1 << 8) /* B: MMC Multimedia Card B Command */
-#define AT91_PA9_ETX0 (1 << 9) /* A: Ethernet Transmit Data 0 */
-#define AT91_PA9_MCDB0 (1 << 9) /* B: MMC Multimedia Card B Data 0 */
-#define AT91_PA10_ETX1 (1 << 10) /* A: Ethernet Transmit Data 1 */
-#define AT91_PA10_MCDB1 (1 << 10) /* B: MMC Multimedia Card B Data 1 */
-#define AT91_PA11_ECRS_ECRSDV (1 << 11) /* A: Ethernet Carrier Sense / Data Valid */
-#define AT91_PA11_MCDB2 (1 << 11) /* B: MMC Multimedia Card B Data 2 */
-#define AT91_PA12_ERX0 (1 << 12) /* A: Ethernet Receive Data 0 */
-#define AT91_PA12_MCDB3 (1 << 12) /* B: MMC Multimedia Card B Data 3 */
-#define AT91_PA13_ERX1 (1 << 13) /* A: Ethernet Receive Data 1 */
-#define AT91_PA13_TCLK0 (1 << 13) /* B: TC External Clock Input 0 */
-#define AT91_PA14_ERXER (1 << 14) /* A: Ethernet Receive Error */
-#define AT91_PA14_TCLK1 (1 << 14) /* B: TC External Clock Input 1 */
-#define AT91_PA15_EMDC (1 << 15) /* A: Ethernet Management Data Clock */
-#define AT91_PA15_TCLK2 (1 << 15) /* B: TC External Clock Input 2 */
-#define AT91_PA16_EMDIO (1 << 16) /* A: Ethernet Management Data I/O */
-#define AT91_PA16_IRQ6 (1 << 16) /* B: External Interrupt 6 */
-#define AT91_PA17_TXD0 (1 << 17) /* A: USART Transmit Data 0 */
-#define AT91_PA17_TIOA0 (1 << 17) /* B: TC I/O Line A 0 */
-#define AT91_PA18_RXD0 (1 << 18) /* A: USART Receive Data 0 */
-#define AT91_PA18_TIOB0 (1 << 18) /* B: TC I/O Line B 0 */
-#define AT91_PA19_SCK0 (1 << 19) /* A: USART Serial Clock 0 */
-#define AT91_PA19_TIOA1 (1 << 19) /* B: TC I/O Line A 1 */
-#define AT91_PA20_CTS0 (1 << 20) /* A: USART Clear To Send 0 */
-#define AT91_PA20_TIOB1 (1 << 20) /* B: TC I/O Line B 1 */
-#define AT91_PA21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
-#define AT91_PA21_TIOA2 (1 << 21) /* B: TC I/O Line A 2 */
-#define AT91_PA22_RXD2 (1 << 22) /* A: USART Receive Data 2 */
-#define AT91_PA22_TIOB2 (1 << 22) /* B: TC I/O Line B 2 */
-#define AT91_PA23_TXD2 (1 << 23) /* A: USART Transmit Data 2 */
-#define AT91_PA23_IRQ3 (1 << 23) /* B: External Interrupt 3 */
-#define AT91_PA24_SCK2 (1 << 24) /* A: USART Serial Clock 2 */
-#define AT91_PA24_PCK1 (1 << 24) /* B: PMC Programmable Clock Output 1 */
-#define AT91_PA25_TWD (1 << 25) /* A: TWI Two-wire Serial Data */
-#define AT91_PA25_IRQ2 (1 << 25) /* B: External Interrupt 2 */
-#define AT91_PA26_TWCK (1 << 26) /* A: TWI Two-wire Serial Clock */
-#define AT91_PA26_IRQ1 (1 << 26) /* B: External Interrupt 1 */
-#define AT91_PA27_MCCK (1 << 27) /* A: MMC Multimedia Card Clock */
-#define AT91_PA27_TCLK3 (1 << 27) /* B: TC External Clock Input 3 */
-#define AT91_PA28_MCCDA (1 << 28) /* A: MMC Multimedia Card A Command */
-#define AT91_PA28_TCLK4 (1 << 28) /* B: TC External Clock Input 4 */
-#define AT91_PA29_MCDA0 (1 << 29) /* A: MMC Multimedia Card A Data 0 */
-#define AT91_PA29_TCLK5 (1 << 29) /* B: TC External Clock Input 5 */
-#define AT91_PA30_DRXD (1 << 30) /* A: DBGU Receive Data */
-#define AT91_PA30_CTS2 (1 << 30) /* B: USART Clear To Send 2 */
-#define AT91_PA31_DTXD (1 << 31) /* A: DBGU Transmit Data */
-#define AT91_PA31_RTS2 (1 << 31) /* B: USART Ready To Send 2 */
-
-#define AT91_PB0_TF0 (1 << 0) /* A: SSC Transmit Frame Sync 0 */
-#define AT91_PB0_RTS3 (1 << 0) /* B: USART Ready To Send 3 */
-#define AT91_PB1_TK0 (1 << 1) /* A: SSC Transmit Clock 0 */
-#define AT91_PB1_CTS3 (1 << 1) /* B: USART Clear To Send 3 */
-#define AT91_PB2_TD0 (1 << 2) /* A: SSC Transmit Data 0 */
-#define AT91_PB2_SCK3 (1 << 2) /* B: USART Serial Clock 3 */
-#define AT91_PB3_RD0 (1 << 3) /* A: SSC Receive Data 0 */
-#define AT91_PB3_MCDA1 (1 << 3) /* B: MMC Multimedia Card A Data 1 */
-#define AT91_PB4_RK0 (1 << 4) /* A: SSC Receive Clock 0 */
-#define AT91_PB4_MCDA2 (1 << 4) /* B: MMC Multimedia Card A Data 2 */
-#define AT91_PB5_RF0 (1 << 5) /* A: SSC Receive Frame Sync 0 */
-#define AT91_PB5_MCDA3 (1 << 5) /* B: MMC Multimedia Card A Data 3 */
-#define AT91_PB6_TF1 (1 << 6) /* A: SSC Transmit Frame Sync 1 */
-#define AT91_PB6_TIOA3 (1 << 6) /* B: TC I/O Line A 3 */
-#define AT91_PB7_TK1 (1 << 7) /* A: SSC Transmit Clock 1 */
-#define AT91_PB7_TIOB3 (1 << 7) /* B: TC I/O Line B 3 */
-#define AT91_PB8_TD1 (1 << 8) /* A: SSC Transmit Data 1 */
-#define AT91_PB8_TIOA4 (1 << 8) /* B: TC I/O Line A 4 */
-#define AT91_PB9_RD1 (1 << 9) /* A: SSC Receive Data 1 */
-#define AT91_PB9_TIOB4 (1 << 9) /* B: TC I/O Line B 4 */
-#define AT91_PB10_RK1 (1 << 10) /* A: SSC Receive Clock 1 */
-#define AT91_PB10_TIOA5 (1 << 10) /* B: TC I/O Line A 5 */
-#define AT91_PB11_RF1 (1 << 11) /* A: SSC Receive Frame Sync 1 */
-#define AT91_PB11_TIOB5 (1 << 11) /* B: TC I/O Line B 5 */
-#define AT91_PB12_TF2 (1 << 12) /* A: SSC Transmit Frame Sync 2 */
-#define AT91_PB12_ETX2 (1 << 12) /* B: Ethernet Transmit Data 2 */
-#define AT91_PB13_TK2 (1 << 13) /* A: SSC Transmit Clock 3 */
-#define AT91_PB13_ETX3 (1 << 13) /* B: Ethernet Transmit Data 3 */
-#define AT91_PB14_TD2 (1 << 14) /* A: SSC Transmit Data 2 */
-#define AT91_PB14_ETXER (1 << 14) /* B: Ethernet Transmit Coding Error */
-#define AT91_PB15_RD2 (1 << 15) /* A: SSC Receive Data 2 */
-#define AT91_PB15_ERX2 (1 << 15) /* B: Ethernet Receive Data 2 */
-#define AT91_PB16_RK2 (1 << 16) /* A: SSC Receive Clock 2 */
-#define AT91_PB16_ERX3 (1 << 16) /* B: Ethernet Receive Data 3 */
-#define AT91_PB17_RF2 (1 << 17) /* A: SSC Receive Frame Sync 2 */
-#define AT91_PB17_ERXDV (1 << 17) /* B: Ethernet Receive Data Valid */
-#define AT91_PB18_RI1 (1 << 18) /* A: USART Ring Indicator 1 */
-#define AT91_PB18_ECOL (1 << 18) /* B: Ethernet Collision Detected */
-#define AT91_PB19_DTR1 (1 << 19) /* A: USART Data Terminal Ready 1 */
-#define AT91_PB19_ERXCK (1 << 19) /* B: Ethernet Receive Clock */
-#define AT91_PB20_TXD1 (1 << 20) /* A: USART Transmit Data 1 */
-#define AT91_PB21_RXD1 (1 << 21) /* A: USART Receive Data 1 */
-#define AT91_PB22_SCK1 (1 << 22) /* A: USART Serial Clock 1 */
-#define AT91_PB23_DCD1 (1 << 23) /* A: USART Data Carrier Detect 1 */
-#define AT91_PB24_CTS1 (1 << 24) /* A: USART Clear To Send 1 */
-#define AT91_PB25_DSR1 (1 << 25) /* A: USART Data Set Ready 1 */
-#define AT91_PB25_EF100 (1 << 25) /* B: Ethernet Force 100 Mbit */
-#define AT91_PB26_RTS1 (1 << 26) /* A: USART Ready To Send 1 */
-#define AT91_PB27_PCK0 (1 << 27) /* B: PMC Programmable Clock Output 0 */
-#define AT91_PB28_FIQ (1 << 28) /* A: Fast Interrupt */
-#define AT91_PB29_IRQ0 (1 << 29) /* A: External Interrupt 0 */
-
-#define AT91_PC0_BFCK (1 << 0) /* A: Burst Flash Clock */
-#define AT91_PC1_BFRDY_SMOE (1 << 1) /* A: Burst Flash Ready / SmartMedia Output Enable */
-#define AT91_PC2_BFAVD (1 << 2) /* A: Burst Flash Address Valid */
-#define AT91_PC3_BFBAA_SMWE (1 << 3) /* A: Burst Flash Address Advance / SmartMedia Write Enable */
-#define AT91_PC4_BFOE (1 << 4) /* A: Burst Flash Output Enable */
-#define AT91_PC5_BFWE (1 << 5) /* A: Burst Flash Write Enable */
-#define AT91_PC6_NWAIT (1 << 6) /* A: SMC Wait Signal */
-#define AT91_PC7_A23 (1 << 7) /* A: Address Bus 23 */
-#define AT91_PC8_A24 (1 << 8) /* A: Address Bus 24 */
-#define AT91_PC9_A25_CFRNW (1 << 9) /* A: Address Bus 25 / Compact Flash Read Not Write */
-#define AT91_PC10_NCS4_CFCS (1 << 10) /* A: SMC Chip Select 4 / Compact Flash Chip Select */
-#define AT91_PC11_NCS5_CFCE1 (1 << 11) /* A: SMC Chip Select 5 / Compact Flash Chip Enable 1 */
-#define AT91_PC12_NCS6_CFCE2 (1 << 12) /* A: SMC Chip Select 6 / Compact Flash Chip Enable 2 */
-#define AT91_PC13_NCS7 (1 << 13) /* A: Chip Select 7 */
-
-#define AT91_PD0_ETX0 (1 << 0) /* A: Ethernet Transmit Data 0 */
-#define AT91_PD1_ETX1 (1 << 1) /* A: Ethernet Transmit Data 1 */
-#define AT91_PD2_ETX2 (1 << 2) /* A: Ethernet Transmit Data 2 */
-#define AT91_PD3_ETX3 (1 << 3) /* A: Ethernet Transmit Data 3 */
-#define AT91_PD4_ETXEN (1 << 4) /* A: Ethernet Transmit Enable */
-#define AT91_PD5_ETXER (1 << 5) /* A: Ethernet Transmit Coding Error */
-#define AT91_PD6_DTXD (1 << 6) /* A: DBGU Transmit Data */
-#define AT91_PD7_PCK0 (1 << 7) /* A: PMC Programmable Clock Output 0 */
-#define AT91_PD7_TSYNC (1 << 7) /* B: ETM Trace Synchronization Signal */
-#define AT91_PD8_PCK1 (1 << 8) /* A: PMC Programmable Clock Output 1 */
-#define AT91_PD8_TCLK (1 << 8) /* B: ETM Trace Clock */
-#define AT91_PD9_PCK2 (1 << 9) /* A: PMC Programmable Clock Output 2 */
-#define AT91_PD9_TPS0 (1 << 9) /* B: ETM Trace ARM Pipeline Status 0 */
-#define AT91_PD10_PCK3 (1 << 10) /* A: PMC Programmable Clock Output 3 */
-#define AT91_PD10_TPS1 (1 << 10) /* B: ETM Trace ARM Pipeline Status 1 */
-#define AT91_PD11_TPS2 (1 << 11) /* B: ETM Trace ARM Pipeline Status 2 */
-#define AT91_PD12_TPK0 (1 << 12) /* B: ETM Trace Packet Port 0 */
-#define AT91_PD13_TPK1 (1 << 13) /* B: ETM Trace Packet Port 1 */
-#define AT91_PD14_TPK2 (1 << 14) /* B: ETM Trace Packet Port 2 */
-#define AT91_PD15_TD0 (1 << 15) /* A: SSC Transmit Data 0 */
-#define AT91_PD15_TPK3 (1 << 15) /* B: ETM Trace Packet Port 3 */
-#define AT91_PD16_TD1 (1 << 16) /* A: SSC Transmit Data 1 */
-#define AT91_PD16_TPK4 (1 << 16) /* B: ETM Trace Packet Port 4 */
-#define AT91_PD17_TD2 (1 << 17) /* A: SSC Transmit Data 2 */
-#define AT91_PD17_TPK5 (1 << 17) /* B: ETM Trace Packet Port 5 */
-#define AT91_PD18_NPCS1 (1 << 18) /* A: SPI Peripheral Chip Select 1 */
-#define AT91_PD18_TPK6 (1 << 18) /* B: ETM Trace Packet Port 6 */
-#define AT91_PD19_NPCS2 (1 << 19) /* A: SPI Peripheral Chip Select 2 */
-#define AT91_PD19_TPK7 (1 << 19) /* B: ETM Trace Packet Port 7 */
-#define AT91_PD20_NPCS3 (1 << 20) /* A: SPI Peripheral Chip Select 3 */
-#define AT91_PD20_TPK8 (1 << 20) /* B: ETM Trace Packet Port 8 */
-#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
-#define AT91_PD21_TPK9 (1 << 21) /* B: ETM Trace Packet Port 9 */
-#define AT91_PD22_RTS1 (1 << 22) /* A: USART Ready To Send 1 */
-#define AT91_PD22_TPK10 (1 << 22) /* B: ETM Trace Packet Port 10 */
-#define AT91_PD23_RTS2 (1 << 23) /* A: USART Ready To Send 2 */
-#define AT91_PD23_TPK11 (1 << 23) /* B: ETM Trace Packet Port 11 */
-#define AT91_PD24_RTS3 (1 << 24) /* A: USART Ready To Send 3 */
-#define AT91_PD24_TPK12 (1 << 24) /* B: ETM Trace Packet Port 12 */
-#define AT91_PD25_DTR1 (1 << 25) /* A: USART Data Terminal Ready 1 */
-#define AT91_PD25_TPK13 (1 << 25) /* B: ETM Trace Packet Port 13 */
-#define AT91_PD26_TPK14 (1 << 26) /* B: ETM Trace Packet Port 14 */
-#define AT91_PD27_TPK15 (1 << 27) /* B: ETM Trace Packet Port 15 */
-#endif
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Ethernet MAC registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_EMAC_H
-#define AT91RM9200_EMAC_H
-
-#define AT91_EMAC_CTL 0x00 /* Control Register */
-#define AT91_EMAC_LB (1 << 0) /* Loopback */
-#define AT91_EMAC_LBL (1 << 1) /* Loopback Local */
-#define AT91_EMAC_RE (1 << 2) /* Receive Enable */
-#define AT91_EMAC_TE (1 << 3) /* Transmit Enable */
-#define AT91_EMAC_MPE (1 << 4) /* Management Port Enable */
-#define AT91_EMAC_CSR (1 << 5) /* Clear Statistics Registers */
-#define AT91_EMAC_INCSTAT (1 << 6) /* Increment Statistics Registers */
-#define AT91_EMAC_WES (1 << 7) /* Write Enable for Statistics Registers */
-#define AT91_EMAC_BP (1 << 8) /* Back Pressure */
-
-#define AT91_EMAC_CFG 0x04 /* Configuration Register */
-#define AT91_EMAC_SPD (1 << 0) /* Speed */
-#define AT91_EMAC_FD (1 << 1) /* Full Duplex */
-#define AT91_EMAC_BR (1 << 2) /* Bit Rate */
-#define AT91_EMAC_CAF (1 << 4) /* Copy All Frames */
-#define AT91_EMAC_NBC (1 << 5) /* No Broadcast */
-#define AT91_EMAC_MTI (1 << 6) /* Multicast Hash Enable */
-#define AT91_EMAC_UNI (1 << 7) /* Unicast Hash Enable */
-#define AT91_EMAC_BIG (1 << 8) /* Receive 1522 Bytes */
-#define AT91_EMAC_EAE (1 << 9) /* External Address Match Enable */
-#define AT91_EMAC_CLK (3 << 10) /* MDC Clock Divisor */
-#define AT91_EMAC_CLK_DIV8 (0 << 10)
-#define AT91_EMAC_CLK_DIV16 (1 << 10)
-#define AT91_EMAC_CLK_DIV32 (2 << 10)
-#define AT91_EMAC_CLK_DIV64 (3 << 10)
-#define AT91_EMAC_RTY (1 << 12) /* Retry Test */
-#define AT91_EMAC_RMII (1 << 13) /* Reduce MII (RMII) */
-
-#define AT91_EMAC_SR 0x08 /* Status Register */
-#define AT91_EMAC_SR_LINK (1 << 0) /* Link */
-#define AT91_EMAC_SR_MDIO (1 << 1) /* MDIO pin */
-#define AT91_EMAC_SR_IDLE (1 << 2) /* PHY idle */
-
-#define AT91_EMAC_TAR 0x0c /* Transmit Address Register */
-
-#define AT91_EMAC_TCR 0x10 /* Transmit Control Register */
-#define AT91_EMAC_LEN (0x7ff << 0) /* Transmit Frame Length */
-#define AT91_EMAC_NCRC (1 << 15) /* No CRC */
-
-#define AT91_EMAC_TSR 0x14 /* Transmit Status Register */
-#define AT91_EMAC_TSR_OVR (1 << 0) /* Transmit Buffer Overrun */
-#define AT91_EMAC_TSR_COL (1 << 1) /* Collision Occurred */
-#define AT91_EMAC_TSR_RLE (1 << 2) /* Retry Limit Exceeded */
-#define AT91_EMAC_TSR_IDLE (1 << 3) /* Transmitter Idle */
-#define AT91_EMAC_TSR_BNQ (1 << 4) /* Transmit Buffer not Queued */
-#define AT91_EMAC_TSR_COMP (1 << 5) /* Transmit Complete */
-#define AT91_EMAC_TSR_UND (1 << 6) /* Transmit Underrun */
-
-#define AT91_EMAC_RBQP 0x18 /* Receive Buffer Queue Pointer */
-
-#define AT91_EMAC_RSR 0x20 /* Receive Status Register */
-#define AT91_EMAC_RSR_BNA (1 << 0) /* Buffer Not Available */
-#define AT91_EMAC_RSR_REC (1 << 1) /* Frame Received */
-#define AT91_EMAC_RSR_OVR (1 << 2) /* RX Overrun */
-
-#define AT91_EMAC_ISR 0x24 /* Interrupt Status Register */
-#define AT91_EMAC_DONE (1 << 0) /* Management Done */
-#define AT91_EMAC_RCOM (1 << 1) /* Receive Complete */
-#define AT91_EMAC_RBNA (1 << 2) /* Receive Buffer Not Available */
-#define AT91_EMAC_TOVR (1 << 3) /* Transmit Buffer Overrun */
-#define AT91_EMAC_TUND (1 << 4) /* Transmit Buffer Underrun */
-#define AT91_EMAC_RTRY (1 << 5) /* Retry Limit */
-#define AT91_EMAC_TBRE (1 << 6) /* Transmit Buffer Register Empty */
-#define AT91_EMAC_TCOM (1 << 7) /* Transmit Complete */
-#define AT91_EMAC_TIDLE (1 << 8) /* Transmit Idle */
-#define AT91_EMAC_LINK (1 << 9) /* Link */
-#define AT91_EMAC_ROVR (1 << 10) /* RX Overrun */
-#define AT91_EMAC_ABT (1 << 11) /* Abort */
-
-#define AT91_EMAC_IER 0x28 /* Interrupt Enable Register */
-#define AT91_EMAC_IDR 0x2c /* Interrupt Disable Register */
-#define AT91_EMAC_IMR 0x30 /* Interrupt Mask Register */
-
-#define AT91_EMAC_MAN 0x34 /* PHY Maintenance Register */
-#define AT91_EMAC_DATA (0xffff << 0) /* MDIO Data */
-#define AT91_EMAC_REGA (0x1f << 18) /* MDIO Register */
-#define AT91_EMAC_PHYA (0x1f << 23) /* MDIO PHY Address */
-#define AT91_EMAC_RW (3 << 28) /* Read/Write operation */
-#define AT91_EMAC_RW_W (1 << 28)
-#define AT91_EMAC_RW_R (2 << 28)
-#define AT91_EMAC_MAN_802_3 0x40020000 /* IEEE 802.3 value */
-
-/*
- * Statistics Registers.
- */
-#define AT91_EMAC_FRA 0x40 /* Frames Transmitted OK */
-#define AT91_EMAC_SCOL 0x44 /* Single Collision Frame */
-#define AT91_EMAC_MCOL 0x48 /* Multiple Collision Frame */
-#define AT91_EMAC_OK 0x4c /* Frames Received OK */
-#define AT91_EMAC_SEQE 0x50 /* Frame Check Sequence Error */
-#define AT91_EMAC_ALE 0x54 /* Alignmemt Error */
-#define AT91_EMAC_DTE 0x58 /* Deffered Transmission Frame */
-#define AT91_EMAC_LCOL 0x5c /* Late Collision */
-#define AT91_EMAC_ECOL 0x60 /* Excessive Collision */
-#define AT91_EMAC_TUE 0x64 /* Transmit Underrun Error */
-#define AT91_EMAC_CSE 0x68 /* Carrier Sense Error */
-#define AT91_EMAC_DRFC 0x6c /* Discard RX Frame */
-#define AT91_EMAC_ROV 0x70 /* Receive Overrun */
-#define AT91_EMAC_CDE 0x74 /* Code Error */
-#define AT91_EMAC_ELR 0x78 /* Excessive Length Error */
-#define AT91_EMAC_RJB 0x7c /* Receive Jabber */
-#define AT91_EMAC_USF 0x80 /* Undersize Frame */
-#define AT91_EMAC_SQEE 0x84 /* SQE Test Error */
-
-/*
- * Address Registers.
- */
-#define AT91_EMAC_HSL 0x90 /* Hash Address Low [31:0] */
-#define AT91_EMAC_HSH 0x94 /* Hash Address High [63:32] */
-#define AT91_EMAC_SA1L 0x98 /* Specific Address 1 Low, bytes 0-3 */
-#define AT91_EMAC_SA1H 0x9c /* Specific Address 1 High, bytes 4-5 */
-#define AT91_EMAC_SA2L 0xa0 /* Specific Address 2 Low, bytes 0-3 */
-#define AT91_EMAC_SA2H 0xa4 /* Specific Address 2 High, bytes 4-5 */
-#define AT91_EMAC_SA3L 0xa8 /* Specific Address 3 Low, bytes 0-3 */
-#define AT91_EMAC_SA3H 0xac /* Specific Address 3 High, bytes 4-5 */
-#define AT91_EMAC_SA4L 0xb0 /* Specific Address 4 Low, bytes 0-3 */
-#define AT91_EMAC_SA4H 0xb4 /* Specific Address 4 High, bytes 4-5 */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_MC_H
-#define AT91RM9200_MC_H
-
-/* Memory Controller */
-#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */
-#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */
-
-#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */
-#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */
-#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */
-#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */
-#define AT91_MC_ABTSZ_BYTE (0 << 8)
-#define AT91_MC_ABTSZ_HALFWORD (1 << 8)
-#define AT91_MC_ABTSZ_WORD (2 << 8)
-#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */
-#define AT91_MC_ABTTYP_DATAREAD (0 << 10)
-#define AT91_MC_ABTTYP_DATAWRITE (1 << 10)
-#define AT91_MC_ABTTYP_FETCH (2 << 10)
-#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */
-#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */
-#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */
-#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */
-#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */
-#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */
-#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */
-#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */
-
-#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */
-
-#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */
-#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */
-#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */
-#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */
-#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */
-
-/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */
-#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */
-#define AT91_EBI_CS0A_SMC (0 << 0)
-#define AT91_EBI_CS0A_BFC (1 << 0)
-#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_EBI_CS1A_SMC (0 << 1)
-#define AT91_EBI_CS1A_SDRAMC (1 << 1)
-#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */
-#define AT91_EBI_CS3A_SMC (0 << 3)
-#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */
-#define AT91_EBI_CS4A_SMC (0 << 4)
-#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4)
-#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */
-#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */
-
-/* Static Memory Controller (SMC) registers */
-#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
-#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */
-#define AT91_SMC_NWS_(x) ((x) << 0)
-#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */
-#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */
-#define AT91_SMC_TDF_(x) ((x) << 8)
-#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */
-#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */
-#define AT91_SMC_DBW_16 (1 << 13)
-#define AT91_SMC_DBW_8 (2 << 13)
-#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */
-#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */
-#define AT91_SMC_ACSS_STD (0 << 16)
-#define AT91_SMC_ACSS_1 (1 << 16)
-#define AT91_SMC_ACSS_2 (2 << 16)
-#define AT91_SMC_ACSS_3 (3 << 16)
-#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */
-#define AT91_SMC_RWSETUP_(x) ((x) << 24)
-#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */
-#define AT91_SMC_RWHOLD_(x) ((x) << 28)
-
-/* SDRAM Controller registers */
-#define AT91_SDRAMC_MR (AT91_MC + 0x90) /* Mode Register */
-#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
-#define AT91_SDRAMC_MODE_NORMAL (0 << 0)
-#define AT91_SDRAMC_MODE_NOP (1 << 0)
-#define AT91_SDRAMC_MODE_PRECHARGE (2 << 0)
-#define AT91_SDRAMC_MODE_LMR (3 << 0)
-#define AT91_SDRAMC_MODE_REFRESH (4 << 0)
-#define AT91_SDRAMC_DBW (1 << 4) /* Data Bus Width */
-#define AT91_SDRAMC_DBW_32 (0 << 4)
-#define AT91_SDRAMC_DBW_16 (1 << 4)
-
-#define AT91_SDRAMC_TR (AT91_MC + 0x94) /* Refresh Timer Register */
-#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */
-
-#define AT91_SDRAMC_CR (AT91_MC + 0x98) /* Configuration Register */
-#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
-#define AT91_SDRAMC_NC_8 (0 << 0)
-#define AT91_SDRAMC_NC_9 (1 << 0)
-#define AT91_SDRAMC_NC_10 (2 << 0)
-#define AT91_SDRAMC_NC_11 (3 << 0)
-#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
-#define AT91_SDRAMC_NR_11 (0 << 2)
-#define AT91_SDRAMC_NR_12 (1 << 2)
-#define AT91_SDRAMC_NR_13 (2 << 2)
-#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
-#define AT91_SDRAMC_NB_2 (0 << 4)
-#define AT91_SDRAMC_NB_4 (1 << 4)
-#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
-#define AT91_SDRAMC_CAS_2 (2 << 5)
-#define AT91_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */
-#define AT91_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */
-#define AT91_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */
-#define AT91_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */
-#define AT91_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */
-#define AT91_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_SRR (AT91_MC + 0x9c) /* Self Refresh Register */
-#define AT91_SDRAMC_LPR (AT91_MC + 0xa0) /* Low Power Register */
-#define AT91_SDRAMC_IER (AT91_MC + 0xa4) /* Interrupt Enable Register */
-#define AT91_SDRAMC_IDR (AT91_MC + 0xa8) /* Interrupt Disable Register */
-#define AT91_SDRAMC_IMR (AT91_MC + 0xac) /* Interrupt Mask Register */
-#define AT91_SDRAMC_ISR (AT91_MC + 0xb0) /* Interrupt Status Register */
-
-/* Burst Flash Controller register */
-#define AT91_BFC_MR (AT91_MC + 0xc0) /* Mode Register */
-#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */
-#define AT91_BFC_BFCOM_DISABLED (0 << 0)
-#define AT91_BFC_BFCOM_ASYNC (1 << 0)
-#define AT91_BFC_BFCOM_BURST (2 << 0)
-#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */
-#define AT91_BFC_BFCC_MCK (1 << 2)
-#define AT91_BFC_BFCC_DIV2 (2 << 2)
-#define AT91_BFC_BFCC_DIV4 (3 << 2)
-#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */
-#define AT91_BFC_PAGES (7 << 8) /* Page Size */
-#define AT91_BFC_PAGES_NO_PAGE (0 << 8)
-#define AT91_BFC_PAGES_16 (1 << 8)
-#define AT91_BFC_PAGES_32 (2 << 8)
-#define AT91_BFC_PAGES_64 (3 << 8)
-#define AT91_BFC_PAGES_128 (4 << 8)
-#define AT91_BFC_PAGES_256 (5 << 8)
-#define AT91_BFC_PAGES_512 (6 << 8)
-#define AT91_BFC_PAGES_1024 (7 << 8)
-#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */
-#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */
-#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */
-#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */
-#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91sam9260.h
- *
- * (C) 2006 Andrew Victor
- *
- * Common definitions.
- * Based on AT91SAM9260 datasheet revision A (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_H
-#define AT91SAM9260_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */
-#define AT91SAM9260_ID_US0 6 /* USART 0 */
-#define AT91SAM9260_ID_US1 7 /* USART 1 */
-#define AT91SAM9260_ID_US2 8 /* USART 2 */
-#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */
-#define AT91SAM9260_ID_UDP 10 /* USB Device Port */
-#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */
-#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */
-#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */
-#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */
-#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */
-#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */
-#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */
-#define AT91SAM9260_ID_UHP 20 /* USB Host port */
-#define AT91SAM9260_ID_EMAC 21 /* Ethernet */
-#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */
-#define AT91SAM9260_ID_US3 23 /* USART 3 */
-#define AT91SAM9260_ID_US4 24 /* USART 4 */
-#define AT91SAM9260_ID_US5 25 /* USART 5 */
-#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */
-#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */
-#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */
-#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9260_BASE_TCB0 0xfffa0000
-#define AT91SAM9260_BASE_TC0 0xfffa0000
-#define AT91SAM9260_BASE_TC1 0xfffa0040
-#define AT91SAM9260_BASE_TC2 0xfffa0080
-#define AT91SAM9260_BASE_UDP 0xfffa4000
-#define AT91SAM9260_BASE_MCI 0xfffa8000
-#define AT91SAM9260_BASE_TWI 0xfffac000
-#define AT91SAM9260_BASE_US0 0xfffb0000
-#define AT91SAM9260_BASE_US1 0xfffb4000
-#define AT91SAM9260_BASE_US2 0xfffb8000
-#define AT91SAM9260_BASE_SSC 0xfffbc000
-#define AT91SAM9260_BASE_ISI 0xfffc0000
-#define AT91SAM9260_BASE_EMAC 0xfffc4000
-#define AT91SAM9260_BASE_SPI0 0xfffc8000
-#define AT91SAM9260_BASE_SPI1 0xfffcc000
-#define AT91SAM9260_BASE_US3 0xfffd0000
-#define AT91SAM9260_BASE_US4 0xfffd4000
-#define AT91SAM9260_BASE_US5 0xfffd8000
-#define AT91SAM9260_BASE_TCB1 0xfffdc000
-#define AT91SAM9260_BASE_TC3 0xfffdc000
-#define AT91SAM9260_BASE_TC4 0xfffdc040
-#define AT91SAM9260_BASE_TC5 0xfffdc080
-#define AT91SAM9260_BASE_ADC 0xfffe0000
-#define AT91_BASE_SYS 0xffffe800
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */
-#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */
-#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */
-#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */
-#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */
-
-#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */
-
-#if 0
-/*
- * PIO pin definitions (peripheral A/B multiplexing).
- */
-
-// TODO: Add
-
-#endif
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_MATRIX_H
-#define AT91SAM9260_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x04) /* Master Configuration Register 5 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91sam9261.h
- *
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91SAM9261 datasheet revision E. (Preliminary)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_H
-#define AT91SAM9261_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-#define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9261_ID_US0 6 /* USART 0 */
-#define AT91SAM9261_ID_US1 7 /* USART 1 */
-#define AT91SAM9261_ID_US2 8 /* USART 2 */
-#define AT91SAM9261_ID_MCI 9 /* Multimedia Card Interface */
-#define AT91SAM9261_ID_UDP 10 /* USB Device Port */
-#define AT91SAM9261_ID_TWI 11 /* Two-Wire Interface */
-#define AT91SAM9261_ID_SPI0 12 /* Serial Peripheral Interface 0 */
-#define AT91SAM9261_ID_SPI1 13 /* Serial Peripheral Interface 1 */
-#define AT91SAM9261_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91SAM9261_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91SAM9261_ID_SSC2 16 /* Serial Synchronous Controller 2 */
-#define AT91SAM9261_ID_TC0 17 /* Timer Counter 0 */
-#define AT91SAM9261_ID_TC1 18 /* Timer Counter 1 */
-#define AT91SAM9261_ID_TC2 19 /* Timer Counter 2 */
-#define AT91SAM9261_ID_UHP 20 /* USB Host port */
-#define AT91SAM9261_ID_LCDC 21 /* LDC Controller */
-#define AT91SAM9261_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9261_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9261_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9261_BASE_TCB0 0xfffa0000
-#define AT91SAM9261_BASE_TC0 0xfffa0000
-#define AT91SAM9261_BASE_TC1 0xfffa0040
-#define AT91SAM9261_BASE_TC2 0xfffa0080
-#define AT91SAM9261_BASE_UDP 0xfffa4000
-#define AT91SAM9261_BASE_MCI 0xfffa8000
-#define AT91SAM9261_BASE_TWI 0xfffac000
-#define AT91SAM9261_BASE_US0 0xfffb0000
-#define AT91SAM9261_BASE_US1 0xfffb4000
-#define AT91SAM9261_BASE_US2 0xfffb8000
-#define AT91SAM9261_BASE_SSC0 0xfffbc000
-#define AT91SAM9261_BASE_SSC1 0xfffc0000
-#define AT91SAM9261_BASE_SSC2 0xfffc4000
-#define AT91SAM9261_BASE_SPI0 0xfffc8000
-#define AT91SAM9261_BASE_SPI1 0xfffcc000
-#define AT91_BASE_SYS 0xffffea00
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
-
-#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT91SAM9261_UHP_BASE 0x00500000 /* USB Host controller */
-#define AT91SAM9261_LCDC_BASE 0x00600000 /* LDC controller */
-
-
-#if 0
-/*
- * PIO pin definitions (peripheral A/B multiplexing).
- */
-#define AT91_PA0_SPI0_MISO (1 << 0) /* A: SPI0 Master In Slave */
-#define AT91_PA0_MCDA0 (1 << 0) /* B: Multimedia Card A Data 0 */
-#define AT91_PA1_SPI0_MOSI (1 << 1) /* A: SPI0 Master Out Slave */
-#define AT91_PA1_MCCDA (1 << 1) /* B: Multimedia Card A Command */
-#define AT91_PA2_SPI0_SPCK (1 << 2) /* A: SPI0 Serial Clock */
-#define AT91_PA2_MCCK (1 << 2) /* B: Multimedia Card Clock */
-#define AT91_PA3_SPI0_NPCS0 (1 << 3) /* A: SPI0 Peripheral Chip Select 0 */
-#define AT91_PA4_SPI0_NPCS1 (1 << 4) /* A: SPI0 Peripheral Chip Select 1 */
-#define AT91_PA4_MCDA1 (1 << 4) /* B: Multimedia Card A Data 1 */
-#define AT91_PA5_SPI0_NPCS2 (1 << 5) /* A: SPI0 Peripheral Chip Select 2 */
-#define AT91_PA5_MCDA2 (1 << 5) /* B: Multimedia Card A Data 2 */
-#define AT91_PA6_SPI0_NPCS3 (1 << 6) /* A: SPI0 Peripheral Chip Select 3 */
-#define AT91_PA6_MCDA3 (1 << 6) /* B: Multimedia Card A Data 3 */
-#define AT91_PA7_TWD (1 << 7) /* A: TWI Two-wire Serial Data */
-#define AT91_PA7_PCK0 (1 << 7) /* B: PMC Programmable clock Output 0 */
-#define AT91_PA8_TWCK (1 << 8) /* A: TWI Two-wire Serial Clock */
-#define AT91_PA8_PCK1 (1 << 8) /* B: PMC Programmable clock Output 1 */
-#define AT91_PA9_DRXD (1 << 9) /* A: DBGU Debug Receive Data */
-#define AT91_PA9_PCK2 (1 << 9) /* B: PMC Programmable clock Output 2 */
-#define AT91_PA10_DTXD (1 << 10) /* A: DBGU Debug Transmit Data */
-#define AT91_PA10_PCK3 (1 << 10) /* B: PMC Programmable clock Output 3 */
-#define AT91_PA11_TSYNC (1 << 11) /* A: Trace Synchronization Signal */
-#define AT91_PA11_SCK1 (1 << 11) /* B: USART1 Serial Clock */
-#define AT91_PA12_TCLK (1 << 12) /* A: Trace Clock */
-#define AT91_PA12_RTS1 (1 << 12) /* B: USART1 Ready To Send */
-#define AT91_PA13_TPS0 (1 << 13) /* A: Trace ARM Pipeline Status 0 */
-#define AT91_PA13_CTS1 (1 << 13) /* B: USART1 Clear To Send */
-#define AT91_PA14_TPS1 (1 << 14) /* A: Trace ARM Pipeline Status 1 */
-#define AT91_PA14_SCK2 (1 << 14) /* B: USART2 Serial Clock */
-#define AT91_PA15_TPS2 (1 << 15) /* A: Trace ARM Pipeline Status 2 */
-#define AT91_PA15_RTS2 (1 << 15) /* B: USART2 Ready To Send */
-#define AT91_PA16_TPK0 (1 << 16) /* A: Trace Packet Port 0 */
-#define AT91_PA16_CTS2 (1 << 16) /* B: USART2 Clear To Send */
-#define AT91_PA17_TPK1 (1 << 17) /* A: Trace Packet Port 1 */
-#define AT91_PA17_TF1 (1 << 17) /* B: SSC1 Transmit Frame Sync */
-#define AT91_PA18_TPK2 (1 << 18) /* A: Trace Packet Port 2 */
-#define AT91_PA18_TK1 (1 << 18) /* B: SSC1 Transmit Clock */
-#define AT91_PA19_TPK3 (1 << 19) /* A: Trace Packet Port 3 */
-#define AT91_PA19_TD1 (1 << 19) /* B: SSC1 Transmit Data */
-#define AT91_PA20_TPK4 (1 << 20) /* A: Trace Packet Port 4 */
-#define AT91_PA20_RD1 (1 << 20) /* B: SSC1 Receive Data */
-#define AT91_PA21_TPK5 (1 << 21) /* A: Trace Packet Port 5 */
-#define AT91_PA21_RK1 (1 << 21) /* B: SSC1 Receive Clock */
-#define AT91_PA22_TPK6 (1 << 22) /* A: Trace Packet Port 6 */
-#define AT91_PA22_RF1 (1 << 22) /* B: SSC1 Receive Frame Sync */
-#define AT91_PA23_TPK7 (1 << 23) /* A: Trace Packet Port 7 */
-#define AT91_PA23_RTS0 (1 << 23) /* B: USART0 Ready To Send */
-#define AT91_PA24_TPK8 (1 << 24) /* A: Trace Packet Port 8 */
-#define AT91_PA24_SPI1_NPCS1 (1 << 24) /* B: SPI1 Peripheral Chip Select 1 */
-#define AT91_PA25_TPK9 (1 << 25) /* A: Trace Packet Port 9 */
-#define AT91_PA25_SPI1_NPCS2 (1 << 25) /* B: SPI1 Peripheral Chip Select 2 */
-#define AT91_PA26_TPK10 (1 << 26) /* A: Trace Packet Port 10 */
-#define AT91_PA26_SPI1_NPCS3 (1 << 26) /* B: SPI1 Peripheral Chip Select 3 */
-#define AT91_PA27_TPK11 (1 << 27) /* A: Trace Packet Port 11 */
-#define AT91_PA27_SPI0_NPCS1 (1 << 27) /* B: SPI0 Peripheral Chip Select 1 */
-#define AT91_PA28_TPK12 (1 << 28) /* A: Trace Packet Port 12 */
-#define AT91_PA28_SPI0_NPCS2 (1 << 28) /* B: SPI0 Peripheral Chip Select 2 */
-#define AT91_PA29_TPK13 (1 << 29) /* A: Trace Packet Port 13 */
-#define AT91_PA29_SPI0_NPCS3 (1 << 29) /* B: SPI0 Peripheral Chip Select 3 */
-#define AT91_PA30_TPK14 (1 << 30) /* A: Trace Packet Port 14 */
-#define AT91_PA30_A23 (1 << 30) /* B: Address Bus bit 23 */
-#define AT91_PA31_TPK15 (1 << 31) /* A: Trace Packet Port 15 */
-#define AT91_PA31_A24 (1 << 31) /* B: Address Bus bit 24 */
-
-#define AT91_PB0_LCDVSYNC (1 << 0) /* A: LCD Vertical Synchronization */
-#define AT91_PB1_LCDHSYNC (1 << 1) /* A: LCD Horizontal Synchronization */
-#define AT91_PB2_LCDDOTCK (1 << 2) /* A: LCD Dot Clock */
-#define AT91_PB2_PCK0 (1 << 2) /* B: PMC Programmable clock Output 0 */
-#define AT91_PB3_LCDDEN (1 << 3) /* A: LCD Data Enable */
-#define AT91_PB4_LCDCC (1 << 4) /* A: LCD Contrast Control */
-#define AT91_PB4_LCDD2 (1 << 4) /* B: LCD Data Bus Bit 2 */
-#define AT91_PB5_LCDD0 (1 << 5) /* A: LCD Data Bus Bit 0 */
-#define AT91_PB5_LCDD3 (1 << 5) /* B: LCD Data Bus Bit 3 */
-#define AT91_PB6_LCDD1 (1 << 6) /* A: LCD Data Bus Bit 1 */
-#define AT91_PB6_LCDD4 (1 << 6) /* B: LCD Data Bus Bit 4 */
-#define AT91_PB7_LCDD2 (1 << 7) /* A: LCD Data Bus Bit 2 */
-#define AT91_PB7_LCDD5 (1 << 7) /* B: LCD Data Bus Bit 5 */
-#define AT91_PB8_LCDD3 (1 << 8) /* A: LCD Data Bus Bit 3 */
-#define AT91_PB8_LCDD6 (1 << 8) /* B: LCD Data Bus Bit 6 */
-#define AT91_PB9_LCDD4 (1 << 9) /* A: LCD Data Bus Bit 4 */
-#define AT91_PB9_LCDD7 (1 << 9) /* B: LCD Data Bus Bit 7 */
-#define AT91_PB10_LCDD5 (1 << 10) /* A: LCD Data Bus Bit 5 */
-#define AT91_PB10_LCDD10 (1 << 10) /* B: LCD Data Bus Bit 10 */
-#define AT91_PB11_LCDD6 (1 << 11) /* A: LCD Data Bus Bit 6 */
-#define AT91_PB11_LCDD11 (1 << 11) /* B: LCD Data Bus Bit 11 */
-#define AT91_PB12_LCDD7 (1 << 12) /* A: LCD Data Bus Bit 7 */
-#define AT91_PB12_LCDD12 (1 << 12) /* B: LCD Data Bus Bit 12 */
-#define AT91_PB13_LCDD8 (1 << 13) /* A: LCD Data Bus Bit 8 */
-#define AT91_PB13_LCDD13 (1 << 13) /* B: LCD Data Bus Bit 13 */
-#define AT91_PB14_LCDD9 (1 << 14) /* A: LCD Data Bus Bit 9 */
-#define AT91_PB14_LCDD14 (1 << 14) /* B: LCD Data Bus Bit 14 */
-#define AT91_PB15_LCDD10 (1 << 15) /* A: LCD Data Bus Bit 10 */
-#define AT91_PB15_LCDD15 (1 << 15) /* B: LCD Data Bus Bit 15 */
-#define AT91_PB16_LCDD11 (1 << 16) /* A: LCD Data Bus Bit 11 */
-#define AT91_PB16_LCDD19 (1 << 16) /* B: LCD Data Bus Bit 19 */
-#define AT91_PB17_LCDD12 (1 << 17) /* A: LCD Data Bus Bit 12 */
-#define AT91_PB17_LCDD20 (1 << 17) /* B: LCD Data Bus Bit 20 */
-#define AT91_PB18_LCDD13 (1 << 18) /* A: LCD Data Bus Bit 13 */
-#define AT91_PB18_LCDD21 (1 << 18) /* B: LCD Data Bus Bit 21 */
-#define AT91_PB19_LCDD14 (1 << 19) /* A: LCD Data Bus Bit 14 */
-#define AT91_PB19_LCDD22 (1 << 19) /* B: LCD Data Bus Bit 22 */
-#define AT91_PB20_LCDD15 (1 << 20) /* A: LCD Data Bus Bit 15 */
-#define AT91_PB20_LCDD23 (1 << 20) /* B: LCD Data Bus Bit 23 */
-#define AT91_PB21_TF0 (1 << 21) /* A: SSC0 Transmit Frame Sync */
-#define AT91_PB21_LCDD16 (1 << 21) /* B: LCD Data Bus Bit 16 */
-#define AT91_PB22_TK0 (1 << 22) /* A: SSC0 Transmit Clock */
-#define AT91_PB22_LCDD17 (1 << 22) /* B: LCD Data Bus Bit 17 */
-#define AT91_PB23_TD0 (1 << 23) /* A: SSC0 Transmit Data */
-#define AT91_PB23_LCDD18 (1 << 23) /* B: LCD Data Bus Bit 18 */
-#define AT91_PB24_RD0 (1 << 24) /* A: SSC0 Receive Data */
-#define AT91_PB24_LCDD19 (1 << 24) /* B: LCD Data Bus Bit 19 */
-#define AT91_PB25_RK0 (1 << 25) /* A: SSC0 Receive Clock */
-#define AT91_PB25_LCDD20 (1 << 25) /* B: LCD Data Bus Bit 20 */
-#define AT91_PB26_RF0 (1 << 26) /* A: SSC0 Receive Frame Sync */
-#define AT91_PB26_LCDD21 (1 << 26) /* B: LCD Data Bus Bit 21 */
-#define AT91_PB27_SPI1_NPCS1 (1 << 27) /* A: SPI1 Peripheral Chip Select 1 */
-#define AT91_PB27_LCDD22 (1 << 27) /* B: LCD Data Bus Bit 22 */
-#define AT91_PB28_SPI1_NPCS0 (1 << 28) /* A: SPI1 Peripheral Chip Select 0 */
-#define AT91_PB28_LCDD23 (1 << 28) /* B: LCD Data Bus Bit 23 */
-#define AT91_PB29_SPI1_SPCK (1 << 29) /* A: SPI1 Serial Clock */
-#define AT91_PB29_IRQ2 (1 << 29) /* B: Interrupt input 2 */
-#define AT91_PB30_SPI1_MISO (1 << 30) /* A: SPI1 Master In Slave */
-#define AT91_PB30_IRQ1 (1 << 30) /* B: Interrupt input 1 */
-#define AT91_PB31_SPI1_MOSI (1 << 31) /* A: SPI1 Master Out Slave */
-#define AT91_PB31_PCK2 (1 << 31) /* B: PMC Programmable clock Output 2 */
-
-#define AT91_PC0_SMOE (1 << 0) /* A: SmartMedia Output Enable */
-#define AT91_PC0_NCS6 (1 << 0) /* B: Chip Select 6 */
-#define AT91_PC1_SMWE (1 << 1) /* A: SmartMedia Write Enable */
-#define AT91_PC1_NCS7 (1 << 1) /* B: Chip Select 7 */
-#define AT91_PC2_NWAIT (1 << 2) /* A: NWAIT */
-#define AT91_PC2_IRQ0 (1 << 2) /* B: Interrupt input 0 */
-#define AT91_PC3_A25_CFRNW (1 << 3) /* A: Address Bus[25] / Compact Flash Read Not Write */
-#define AT91_PC4_NCS4_CFCS0 (1 << 4) /* A: Chip Select 4 / CompactFlash Chip Select 0 */
-#define AT91_PC5_NCS5_CFCS1 (1 << 5) /* A: Chip Select 5 / CompactFlash Chip Select 1 */
-#define AT91_PC6_CFCE1 (1 << 6) /* A: CompactFlash Chip Enable 1 */
-#define AT91_PC7_CFCE2 (1 << 7) /* A: CompactFlash Chip Enable 2 */
-#define AT91_PC8_TXD0 (1 << 8) /* A: USART0 Transmit Data */
-#define AT91_PC8_PCK2 (1 << 8) /* B: PMC Programmable clock Output 2 */
-#define AT91_PC9_RXD0 (1 << 9) /* A: USART0 Receive Data */
-#define AT91_PC9_PCK3 (1 << 9) /* B: PMC Programmable clock Output 3 */
-#define AT91_PC10_RTS0 (1 << 10) /* A: USART0 Ready To Send */
-#define AT91_PC10_SCK0 (1 << 10) /* B: USART0 Serial Clock */
-#define AT91_PC11_CTS0 (1 << 11) /* A: USART0 Clear To Send */
-#define AT91_PC11_FIQ (1 << 11) /* B: AIC Fast Interrupt Input */
-#define AT91_PC12_TXD1 (1 << 12) /* A: USART1 Transmit Data */
-#define AT91_PC12_NCS6 (1 << 12) /* B: Chip Select 6 */
-#define AT91_PC13_RXD1 (1 << 13) /* A: USART1 Receive Data */
-#define AT91_PC13_NCS7 (1 << 13) /* B: Chip Select 7 */
-#define AT91_PC14_TXD2 (1 << 14) /* A: USART2 Transmit Data */
-#define AT91_PC14_SPI1_NPCS2 (1 << 14) /* B: SPI1 Peripheral Chip Select 2 */
-#define AT91_PC15_RXD2 (1 << 15) /* A: USART2 Receive Data */
-#define AT91_PC15_SPI1_NPCS3 (1 << 15) /* B: SPI1 Peripheral Chip Select 3 */
-#define AT91_PC16_D16 (1 << 16) /* A: Data Bus [16] */
-#define AT91_PC16_TCLK0 (1 << 16) /* B: Timer Counter 0 external clock input */
-#define AT91_PC17_D17 (1 << 17) /* A: Data Bus [17] */
-#define AT91_PC17_TCLK1 (1 << 17) /* B: Timer Counter 1 external clock input */
-#define AT91_PC18_D18 (1 << 18) /* A: Data Bus [18] */
-#define AT91_PC18_TCLK2 (1 << 18) /* B: Timer Counter 2 external clock input */
-#define AT91_PC19_D19 (1 << 19) /* A: Data Bus [19] */
-#define AT91_PC19_TIOA0 (1 << 19) /* B: Timer Counter 0 Multipurpose Timer I/O Pin A */
-#define AT91_PC20_D20 (1 << 20) /* A: Data Bus [20] */
-#define AT91_PC20_TIOB0 (1 << 20) /* B: Timer Counter 0 Multipurpose Timer I/O Pin B */
-#define AT91_PC21_D21 (1 << 21) /* A: Data Bus [21] */
-#define AT91_PC21_TIOA1 (1 << 21) /* B: Timer Counter 1 Multipurpose Timer I/O Pin A */
-#define AT91_PC22_D22 (1 << 22) /* A: Data Bus [22] */
-#define AT91_PC22_TIOB1 (1 << 22) /* B: Timer Counter 1 Multipurpose Timer I/O Pin B */
-#define AT91_PC23_D23 (1 << 23) /* A: Data Bus [23] */
-#define AT91_PC23_TIOA2 (1 << 23) /* B: Timer Counter 2 Multipurpose Timer I/O Pin A */
-#define AT91_PC24_D24 (1 << 24) /* A: Data Bus [24] */
-#define AT91_PC24_TIOB2 (1 << 24) /* B: Timer Counter 2 Multipurpose Timer I/O Pin B */
-#define AT91_PC25_D25 (1 << 25) /* A: Data Bus [25] */
-#define AT91_PC25_TF2 (1 << 25) /* B: SSC2 Transmit Frame Sync */
-#define AT91_PC26_D26 (1 << 26) /* A: Data Bus [26] */
-#define AT91_PC26_TK2 (1 << 26) /* B: SSC2 Transmit Clock */
-#define AT91_PC27_D27 (1 << 27) /* A: Data Bus [27] */
-#define AT91_PC27_TD2 (1 << 27) /* B: SSC2 Transmit Data */
-#define AT91_PC28_D28 (1 << 28) /* A: Data Bus [28] */
-#define AT91_PC28_RD2 (1 << 28) /* B: SSC2 Receive Data */
-#define AT91_PC29_D29 (1 << 29) /* A: Data Bus [29] */
-#define AT91_PC29_RK2 (1 << 29) /* B: SSC2 Receive Clock */
-#define AT91_PC30_D30 (1 << 30) /* A: Data Bus [30] */
-#define AT91_PC30_RF2 (1 << 30) /* B: SSC2 Receive Frame Sync */
-#define AT91_PC31_D31 (1 << 31) /* A: Data Bus [31] */
-#define AT91_PC31_PCK1 (1 << 31) /* B: PMC Programmable clock Output 1 */
-#endif
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_MATRIX_H
-#define AT91SAM9261_MATRIX_H
-
-#define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x0C) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x10) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x14) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
-
-#define AT91_MATRIX_TCR (AT91_MATRIX + 0x24) /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_ITCM_64 (7 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-#define AT91_MATRIX_DTCM_64 (7 << 4)
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-
-#define AT91_MATRIX_USBPUCR (AT91_MATRIX + 0x34) /* USB Pad Pull-Up Control Register */
-#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
- *
- * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM926x_MC_H
-#define AT91SAM926x_MC_H
-
-/* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */
-#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
-#define AT91_SDRAMC_MODE_NORMAL 0
-#define AT91_SDRAMC_MODE_NOP 1
-#define AT91_SDRAMC_MODE_PRECHARGE 2
-#define AT91_SDRAMC_MODE_LMR 3
-#define AT91_SDRAMC_MODE_REFRESH 4
-#define AT91_SDRAMC_MODE_EXT_LMR 5
-#define AT91_SDRAMC_MODE_DEEP 6
-
-#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */
-#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-
-#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */
-#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
-#define AT91_SDRAMC_NC_8 (0 << 0)
-#define AT91_SDRAMC_NC_9 (1 << 0)
-#define AT91_SDRAMC_NC_10 (2 << 0)
-#define AT91_SDRAMC_NC_11 (3 << 0)
-#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
-#define AT91_SDRAMC_NR_11 (0 << 2)
-#define AT91_SDRAMC_NR_12 (1 << 2)
-#define AT91_SDRAMC_NR_13 (2 << 2)
-#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
-#define AT91_SDRAMC_NB_2 (0 << 4)
-#define AT91_SDRAMC_NB_4 (1 << 4)
-#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
-#define AT91_SDRAMC_CAS_1 (1 << 5)
-#define AT91_SDRAMC_CAS_2 (2 << 5)
-#define AT91_SDRAMC_CAS_3 (3 << 5)
-#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
-#define AT91_SDRAMC_DBW_32 (0 << 7)
-#define AT91_SDRAMC_DBW_16 (1 << 7)
-#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
-#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
-#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
-#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
-#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
-#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */
-#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
-#define AT91_SDRAMC_LPCB_DISABLE 0
-#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
-#define AT91_SDRAMC_LPCB_POWER_DOWN 2
-#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
-#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
-#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
-#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */
-#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
-#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
-#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
-#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-
-#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */
-#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
-
-#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */
-#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
-#define AT91_SDRAMC_MD_SDRAM 0
-#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
-
-
-/* Static Memory Controller (SMC) registers */
-#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
-#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
-#define AT91_SMC_NWESETUP_(x) ((x) << 0)
-#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */
-#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8)
-#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */
-#define AT91_SMC_NRDSETUP_(x) ((x) << 16)
-#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */
-#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24)
-
-#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
-#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */
-#define AT91_SMC_NWEPULSE_(x) ((x) << 0)
-#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */
-#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */
-#define AT91_SMC_NRDPULSE_(x) ((x) << 16)
-#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */
-#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
-#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */
-#define AT91_SMC_NWECYCLE_(x) ((x) << 0)
-#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */
-#define AT91_SMC_NRDCYCLE_(x) ((x) << 16)
-
-#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
-#define AT91_SMC_READMODE (1 << 0) /* Read Mode */
-#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */
-#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */
-#define AT91_SMC_EXNWMODE_DISABLE (0 << 4)
-#define AT91_SMC_EXNWMODE_FROZEN (2 << 4)
-#define AT91_SMC_EXNWMODE_READY (3 << 4)
-#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */
-#define AT91_SMC_BAT_SELECT (0 << 8)
-#define AT91_SMC_BAT_WRITE (1 << 8)
-#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */
-#define AT91_SMC_DBW_8 (0 << 12)
-#define AT91_SMC_DBW_16 (1 << 12)
-#define AT91_SMC_DBW_32 (2 << 12)
-#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */
-#define AT91_SMC_TDF_(x) ((x) << 16)
-#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */
-#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */
-#define AT91_SMC_PS (3 << 28) /* Page Size */
-#define AT91_SMC_PS_4 (0 << 28)
-#define AT91_SMC_PS_8 (1 << 28)
-#define AT91_SMC_PS_16 (2 << 28)
-#define AT91_SMC_PS_32 (3 << 28)
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/board.h
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * These are data structures found in platform_device.dev.platform_data,
- * and describing board-specific data needed by drivers. For example,
- * which pin is used for a given GPIO role.
- *
- * In 2.6, drivers should strongly avoid board-specific knowledge so
- * that supporting new boards normally won't require driver patches.
- * Most board-specific knowledge should be in arch/.../board-*.c files.
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-
- /* USB Device */
-struct at91_udc_data {
- u8 vbus_pin; /* high == host powering us */
- u8 pullup_pin; /* high == D+ pulled up */
-};
-extern void __init at91_add_device_udc(struct at91_udc_data *data);
-
- /* Compact Flash */
-struct at91_cf_data {
- u8 irq_pin; /* I/O IRQ */
- u8 det_pin; /* Card detect */
- u8 vcc_pin; /* power switching */
- u8 rst_pin; /* card reset */
- u8 chipselect; /* EBI Chip Select number */
-};
-extern void __init at91_add_device_cf(struct at91_cf_data *data);
-
- /* MMC / SD */
-struct at91_mmc_data {
- u8 det_pin; /* card detect IRQ */
- unsigned slot_b:1; /* uses Slot B */
- unsigned wire4:1; /* (SD) supports DAT0..DAT3 */
- u8 wp_pin; /* (SD) writeprotect detect */
- u8 vcc_pin; /* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
-
- /* Ethernet */
-struct at91_eth_data {
- u8 phy_irq_pin; /* PHY IRQ */
- u8 is_rmii; /* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
-#define eth_platform_data at91_eth_data
-#endif
-
- /* USB Host */
-struct at91_usbh_data {
- u8 ports; /* number of ports on root hub */
-};
-extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
-
- /* NAND / SmartMedia */
-struct at91_nand_data {
- u8 enable_pin; /* chip enable */
- u8 det_pin; /* card detect */
- u8 rdy_pin; /* ready/busy */
- u8 ale; /* address line number connected to ALE */
- u8 cle; /* address line number connected to CLE */
- u8 bus_width_16; /* buswidth is 16 bit */
- struct mtd_partition* (*partition_info)(int, int*);
-};
-extern void __init at91_add_device_nand(struct at91_nand_data *data);
-
- /* I2C*/
-extern void __init at91_add_device_i2c(void);
-
- /* SPI */
-extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
- /* Serial */
-struct at91_uart_config {
- unsigned short console_tty; /* tty number of serial console */
- unsigned short nr_tty; /* number of serial tty's */
- short tty_map[]; /* map UART to tty number */
-};
-extern struct platform_device *atmel_default_console_device;
-extern void __init at91_init_serial(struct at91_uart_config *config);
-
-struct atmel_uart_data {
- short use_dma_tx; /* use transmit DMA? */
- short use_dma_rx; /* use receive DMA? */
- void __iomem *regs; /* virtual base address, if any */
-};
-extern void __init at91_add_device_serial(void);
-
- /* LEDs */
-extern u8 at91_leds_cpu;
-extern u8 at91_leds_timer;
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/cpu.h
- *
- * Copyright (C) 2006 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H
-#define __ASM_ARCH_CPU_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-
-#define ARCH_ID_AT91RM9200 0x09290780
-#define ARCH_ID_AT91SAM9260 0x019803a0
-#define ARCH_ID_AT91SAM9261 0x019703a0
-
-
-static inline unsigned long at91_cpu_identify(void)
-{
- return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
-}
-
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
-#else
-#define cpu_is_at91rm9200() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9260() (at91_cpu_identify() == ARCH_ID_AT91SAM9260)
-#else
-#define cpu_is_at91sam9260() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9261
-#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261)
-#else
-#define cpu_is_at91sam9261() (0)
-#endif
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/debug-macro.S
- *
- * Copyright (C) 2003-2005 SAN People
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =AT91_BASE_SYS @ System peripherals (phys address)
- ldrne \rx, =AT91_VA_BASE_SYS @ System peripherals (virt address)
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #AT91_DBGU_THR] @ Write to Transmitter Holding Register
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
- tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
- beq 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
- tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
- beq 1001b
- .endm
-
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/dma.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/entry-macro.S
- *
- * Copyright (C) 2003-2005 SAN People
- *
- * Low-level IRQ helper macros for AT91RM9200 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_aic.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =(AT91_VA_BASE_SYS) @ base virtual address of SYS peripherals
- ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
- ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number
- teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
- streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now.
- .endm
-
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/gpio.h
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
-#define __ASM_ARCH_AT91RM9200_GPIO_H
-
-#include <asm/irq.h>
-
-#define PIN_BASE NR_AIC_IRQS
-
-#define MAX_GPIO_BANKS 4
-
-/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0)
-#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1)
-#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
-#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
-#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
-
-#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
-#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
-#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
-#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
-#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
-
-#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
-#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
-#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
-#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
-#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
-
-#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
-#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
-#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
-#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
-#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
-
-#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
-#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
-#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
-#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
-#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
-
-#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
-#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
-#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
-#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
-#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
-
-#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
-#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
-
-#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0)
-#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1)
-#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
-#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
-#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
-
-#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
-#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
-#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
-#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
-#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
-
-#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
-#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
-#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
-#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
-#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
-
-#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
-#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
-#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
-#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
-#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
-
-#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
-#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
-#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
-#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
-#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
-
-#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
-#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
-#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
-#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
-#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
-
-#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
-#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
-
-#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0)
-#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1)
-#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
-#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
-#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
-
-#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
-#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
-#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
-#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
-#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
-
-#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
-#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
-#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
-#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
-#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
-
-#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
-#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
-#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
-#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
-#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
-
-#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
-#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
-#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
-#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
-#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
-
-#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
-#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
-#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
-#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
-#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
-
-#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
-#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
-
-#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0)
-#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1)
-#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
-#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
-#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
-
-#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
-#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
-#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
-#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
-#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
-
-#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
-#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
-#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
-#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
-#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
-
-#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
-#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
-#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
-#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
-#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
-
-#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
-#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
-#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
-#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
-#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
-
-#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
-#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
-#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
-#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
-#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
-
-#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
-#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
-
-#ifndef __ASSEMBLY__
-/* setup setup routines, called from board init or driver probe() */
-extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
-extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
-extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
-
-/* callable at any time */
-extern int at91_set_gpio_value(unsigned pin, int value);
-extern int at91_get_gpio_value(unsigned pin);
-
-/* callable only from core power-management code */
-extern void at91_gpio_suspend(void);
-extern void at91_gpio_resume(void);
-#endif
-
-#endif
-
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/hardware.h
- *
- * Copyright (C) 2003 SAN People
- * Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-#include <asm/arch/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260)
-#include <asm/arch/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-#include <asm/arch/at91sam9261.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
-
-
-/*
- * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
- * to 0xFEFA0000 .. 0xFF000000. (384Kb)
- */
-#define AT91_IO_PHYS_BASE 0xFFFA0000
-#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
-#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE)
-
- /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-
-/*
- * Virtual to Physical Address mapping for IO devices.
- */
-#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC)
-
- /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_MAX SZ_1M
-#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
-
-/* Serial ports */
-#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */
-
-/* External Memory Map */
-#define AT91_CHIPSELECT_0 0x10000000
-#define AT91_CHIPSELECT_1 0x20000000
-#define AT91_CHIPSELECT_2 0x30000000
-#define AT91_CHIPSELECT_3 0x40000000
-#define AT91_CHIPSELECT_4 0x50000000
-#define AT91_CHIPSELECT_5 0x60000000
-#define AT91_CHIPSELECT_6 0x70000000
-#define AT91_CHIPSELECT_7 0x80000000
-
-/* SDRAM */
-#define AT91_SDRAM_BASE AT91_CHIPSELECT_1
-
-/* Clocks */
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#ifndef __ASSEMBLY__
-#include <asm/io.h>
-
-static inline unsigned int at91_sys_read(unsigned int reg_offset)
-{
- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
- return __raw_readl(addr + reg_offset);
-}
-
-static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-{
- void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
- __raw_writel(value, addr + reg_offset);
-}
-#endif
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/io.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include <asm/io.h>
-
-#define IO_SPACE_LIMIT 0xFFFFFFFF
-
-#define __io(a) ((void __iomem *)(a))
-#define __mem_pci(a) (a)
-
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/irqs.h
- *
- * Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <asm/arch/at91_aic.h>
-
-#define NR_AIC_IRQS 32
-
-
-/*
- * Acknowledge interrupt with AIC after interrupt has been handled.
- * (by kernel/irq.c)
- */
-#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
-
-
-/*
- * IRQ interrupt symbols are the AT91xxx_ID_* symbols
- * for IRQs handled directly through the AIC, or else the AT91_PIN_*
- * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 4 banks of GPIO.
- */
-#define NR_IRQS (NR_AIC_IRQS + (4 * 32))
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/memory.h
- *
- * Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/hardware.h>
-
-#define PHYS_OFFSET (AT91_SDRAM_BASE)
-
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- * address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- * to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/system.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/at91_dbgu.h>
-
-static inline void arch_idle(void)
-{
- /*
- * Disable the processor clock. The processor will be automatically
- * re-enabled by an interrupt or by a reset.
- */
-// at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-
- /*
- * Set the processor (CP15) into 'Wait for Interrupt' mode.
- * Unlike disabling the processor clock via the PMC (above)
- * this allows the processor to be woken via JTAG.
- */
- cpu_do_idle();
-}
-
-void (*at91_arch_reset)(void);
-
-static inline void arch_reset(char mode)
-{
- /* call the CPU-specific reset function */
- if (at91_arch_reset)
- (at91_arch_reset)();
-}
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/timex.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <asm/hardware.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-
-#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
-
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
-
-#define AT91SAM9_MASTER_CLOCK 99300000
-#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
-
-#endif
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/uncompress.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
- void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */
-
- while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY))
- barrier();
- __raw_writel(c, sys + AT91_DBGU_THR);
-}
-
-static inline void flush(void)
-{
- void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */
-
- /* wait for transmission to complete */
- while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY))
- barrier();
-}
-
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif
+++ /dev/null
-/*
- * include/asm-arm/arch-at91rm9200/vmalloc.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK)
-
-#endif
/*
- * include/asm-arm/arch-at91rm9200/at91_pdc.h
+ * include/asm-arm/arch-at91/at91_pdc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
projects / deliverable / linux.git / commitdiff
