dt-bindings: Consolidate ChipIdea USB ci13xxx bindings

Combine the ChipIdea USB binding into a single document to reduce
duplication and fragmentation. This marks use of the old PHY bindings as
deprecated. Future compatible bindings should use generic PHY binding.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Cc: Peter Chen <peter.chen@freescale.com>
Cc: Daniel Tang <dt.tangr@gmail.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
deleted file mode 100644 (file)
index 38a5480..0000000
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Freescale i.MX ci13xxx usb controllers
-
-Required properties:
-- compatible: Should be "fsl,imx27-usb"
-- reg: Should contain registers location and length
-- interrupts: Should contain controller interrupt
-- fsl,usbphy: phandle of usb phy that connects to the port
-
-Recommended properies:
-- phy_type: the type of the phy connected to the core. Should be one
-  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
-  property the PORTSC register won't be touched
-- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
-
-Optional properties:
-- fsl,usbmisc: phandler of non-core register device, with one argument
-  that indicate usb controller index
-- vbus-supply: regulator for vbus
-- disable-over-current: disable over current detect
-- external-vbus-divider: enables off-chip resistor divider for Vbus
-- maximum-speed: limit the maximum connection speed to "full-speed".
-- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
-
-Examples:
-usb@02184000 { /* USB OTG */
-       compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-       reg = <0x02184000 0x200>;
-       interrupts = <0 43 0x04>;
-       fsl,usbphy = <&usbphy1>;
-       fsl,usbmisc = <&usbmisc 0>;
-       disable-over-current;
-       external-vbus-divider;
-       maximum-speed = "full-speed";
-       tpl-support;
-};

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
deleted file mode 100644 (file)
index f2899b5..0000000
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Qualcomm CI13xxx (Chipidea) USB controllers
-
-Required properties:
-- compatible:   should contain "qcom,ci-hdrc"
-- reg:          offset and length of the register set in the memory map
-- interrupts:   interrupt-specifier for the controller interrupt.
-- usb-phy:      phandle for the PHY device
-- dr_mode:      Should be "peripheral"
-
-Examples:
-       gadget@f9a55000 {
-               compatible = "qcom,ci-hdrc";
-               reg = <0xf9a55000 0x400>;
-               dr_mode = "peripheral";
-               interrupts = <0 134 0>;
-               usb-phy = <&usbphy0>;
-       };

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index 27f8b1e5ee463fc5598b9442002c689c110aa233..553e2fae3a76f5be43b6fa2bfc00b18756892b44 100644 (file)
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -1,15 +1,35 @@
 * USB2 ChipIdea USB controller for ci13xxx
 
 Required properties:
-- compatible: should be "chipidea,usb2"
+- compatible: should be one of:
+       "fsl,imx27-usb"
+       "lsi,zevio-usb"
+       "qcom,ci-hdrc"
+       "chipidea,usb2"
 - reg: base address and length of the registers
 - interrupts: interrupt for the USB controller
 
+Recommended properies:
+- phy_type: the type of the phy connected to the core. Should be one
+  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
+  property the PORTSC register won't be touched.
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
+
+Deprecated properties:
+- usb-phy:      phandle for the PHY device. Use "phys" instead.
+- fsl,usbphy: phandle of usb phy that connects to the port. Use "phys" instead.
+
 Optional properties:
 - clocks: reference to the USB clock
 - phys: reference to the USB PHY
 - phy-names: should be "usb-phy"
 - vbus-supply: reference to the VBUS regulator
+- maximum-speed: limit the maximum connection speed to "full-speed".
+- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
+- fsl,usbmisc: (FSL only) phandler of non-core register device, with one
+  argument that indicate usb controller index
+- disable-over-current: (FSL only) disable over current detect
+- external-vbus-divider: (FSL only) enables off-chip resistor divider for Vbus
 
 Example:
 

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
deleted file mode 100644 (file)
index abbcb2a..0000000
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* LSI Zevio USB OTG Controller
-
-Required properties:
-- compatible: Should be "lsi,zevio-usb"
-- reg: Should contain registers location and length
-- interrupts: Should contain controller interrupt
-
-Optional properties:
-- vbus-supply: regulator for vbus
-
-Examples:
-               usb0: usb@b0000000 {
-                       reg = <0xb0000000 0x1000>;
-                       compatible = "lsi,zevio-usb";
-                       interrupts = <8>;
-                       vbus-supply = <&vbus_reg>;
-               };