staging: comedi: hwdrv_apci3200: remove disabled PRINT_INFO debug

Remove all the PRINT_INFO debug.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
index 3a215ac68b6fb725b79102fd2601d68a4d5e3c01..f95fd6848db06c64f076ad4c67069de92495fd98 100644 (file)
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
@@ -47,8 +47,6 @@ This program is distributed in the hope that it will be useful, but WITHOUT ANY
   +----------+-----------+------------------------------------------------+
 */
 
-/* #define PRINT_INFO */
-
 /* Card Specific information */
 /* #define APCI3200_ADDRESS_RANGE      264 */
 
@@ -455,12 +453,6 @@ static void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAd
                        BoardInformations->s_Module[w_ModulCounter].
                                w_GainValue[w_GainIndex] = w_GainValue;
 
-#             ifdef PRINT_INFO
-                       printk("\n Gain value = %d",
-                               BoardInformations->s_Module[w_ModulCounter].
-                               w_GainValue[w_GainIndex]);
-#             endif
-
          /*************************************/
          /** Read gain factor for the module **/
          /*************************************/
@@ -472,12 +464,6 @@ static void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAd
                                ul_GainFactor[w_GainIndex] =
                                (w_GainFactorValue[1] << 16) +
                                w_GainFactorValue[0];
-
-#             ifdef PRINT_INFO
-                       printk("\n w_GainFactorValue [%d] = %lu", w_GainIndex,
-                               BoardInformations->s_Module[w_ModulCounter].
-                               ul_GainFactor[w_GainIndex]);
-#             endif
                }
 
       /***************************************************************/
@@ -499,12 +485,6 @@ static void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAd
                                ul_CurrentSource[w_Input] =
                                (w_CurrentSources[0] +
                                ((w_CurrentSources[1] & 0xFFF) << 16));
-
-#             ifdef PRINT_INFO
-                       printk("\n Current sources [%d] = %lu", w_Input,
-                               BoardInformations->s_Module[w_ModulCounter].
-                               ul_CurrentSource[w_Input]);
-#             endif
                }
 
       /***************************************/
@@ -522,12 +502,6 @@ static void v_GetAPCI3200EepromCalibrationValue(unsigned int dw_PCIBoardEepromAd
                        ul_CurrentSourceCJC =
                        (w_CurrentSources[0] +
                        ((w_CurrentSources[1] & 0xFFF) << 16));
-
-#          ifdef PRINT_INFO
-               printk("\n Current sources CJC = %lu",
-                       BoardInformations->s_Module[w_ModulCounter].
-                       ul_CurrentSourceCJC);
-#          endif
        }
 }
 
@@ -540,10 +514,6 @@ static int i_APCI3200_GetChannelCalibrationValue(struct comedi_device *dev,
        int i_DiffChannel = 0;
        int i_Module = 0;
 
-#ifdef PRINT_INFO
-       printk("\n Channel = %u", ui_Channel_num);
-#endif
-
        /* Test if single or differential mode */
        if (s_BoardInfos[dev->minor].i_ConnectionType == 1) {
                /* if diff */
@@ -580,16 +550,10 @@ static int i_APCI3200_GetChannelCalibrationValue(struct comedi_device *dev,
        /* Test if thermocouple or RTD mode */
        *CJCCurrentSource =
                s_BoardInfos[dev->minor].s_Module[i_Module].ul_CurrentSourceCJC;
-#ifdef PRINT_INFO
-       printk("\n CJCCurrentSource = %lu", *CJCCurrentSource);
-#endif
 
        *ChannelCurrentSource =
                s_BoardInfos[dev->minor].s_Module[i_Module].
                ul_CurrentSource[i_DiffChannel];
-#ifdef PRINT_INFO
-       printk("\n ChannelCurrentSource = %lu", *ChannelCurrentSource);
-#endif
        /*       } */
        /*    } */
 
@@ -597,9 +561,6 @@ static int i_APCI3200_GetChannelCalibrationValue(struct comedi_device *dev,
        *ChannelGainFactor =
                s_BoardInfos[dev->minor].s_Module[i_Module].
                ul_GainFactor[s_BoardInfos[dev->minor].i_ADDIDATAGain];
-#ifdef PRINT_INFO
-       printk("\n ChannelGainFactor = %lu", *ChannelGainFactor);
-#endif
        /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
        return 0;
@@ -1279,10 +1240,6 @@ static int apci3200_ai_read(struct comedi_device *dev,
                return -EINVAL;
        }                       /* if(i_Initialised==0); */
 
-#ifdef PRINT_INFO
-       printk("\n insn->unused[0] = %i", insn->unused[0]);
-#endif
-
        switch (insn->unused[0]) {
        case 0:
 
@@ -1307,15 +1264,6 @@ static int apci3200_ai_read(struct comedi_device *dev,
                        &s_BoardInfos[dev->minor].
                        ui_InterruptChannelValue[s_BoardInfos[dev->minor].
                                i_Count + 8]);
-
-#ifdef PRINT_INFO
-               printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+6] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 6]);
-
-               printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+7] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 7]);
-
-               printk("\n s_BoardInfos [dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+8] = %lu", s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count + 8]);
-#endif
-
                /* End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
 
                /* BEGIN JK 06.07.04: Management of sevrals boards */
@@ -1471,9 +1419,6 @@ static int apci3200_ai_read(struct comedi_device *dev,
                           data[4]= ui_InterruptChannelValue[4];
                           data[5]= ui_InterruptChannelValue[5];
                         */
-#ifdef PRINT_INFO
-                       printk("\n data[0]= s_BoardInfos [dev->minor].ui_InterruptChannelValue[0];");
-#endif
                        data[0] =
                                s_BoardInfos[dev->minor].
                                ui_InterruptChannelValue[0];
@@ -1576,13 +1521,6 @@ static int apci3200_ai_config(struct comedi_device *dev,
        unsigned int ui_Dummy = 0;
        int i_err = 0;
 
-       /* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
-
-#ifdef PRINT_INFO
-       int i = 0, i2 = 0;
-#endif
-       /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
-
        /* BEGIN JK 06.07.04: Management of sevrals boards */
        /*  Initialize the structure */
        if (s_BoardInfos[dev->minor].b_StructInitialized != 1) {
@@ -1608,29 +1546,6 @@ static int apci3200_ai_config(struct comedi_device *dev,
 
                v_GetAPCI3200EepromCalibrationValue(devpriv->i_IobaseAmcc,
                        &s_BoardInfos[dev->minor]);
-
-#ifdef PRINT_INFO
-               for (i = 0; i < MAX_MODULE; i++) {
-                       printk("\n s_Module[%i].ul_CurrentSourceCJC = %lu", i,
-                               s_BoardInfos[dev->minor].s_Module[i].
-                               ul_CurrentSourceCJC);
-
-                       for (i2 = 0; i2 < 5; i2++) {
-                               printk("\n s_Module[%i].ul_CurrentSource [%i] = %lu", i, i2, s_BoardInfos[dev->minor].s_Module[i].ul_CurrentSource[i2]);
-                       }
-
-                       for (i2 = 0; i2 < 8; i2++) {
-                               printk("\n s_Module[%i].ul_GainFactor [%i] = %lu", i, i2, s_BoardInfos[dev->minor].s_Module[i].ul_GainFactor[i2]);
-                       }
-
-                       for (i2 = 0; i2 < 8; i2++) {
-                               printk("\n s_Module[%i].w_GainValue [%i] = %u",
-                                       i, i2,
-                                       s_BoardInfos[dev->minor].s_Module[i].
-                                       w_GainValue[i2]);
-                       }
-               }
-#endif
                /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
        }