ARM: mach-shmobile: ap4evb: Add LCD panel selection

On AP4EVB board, it is possible to select LCD panel type
which are parallel or MIPI by SW3, SW43 dip-switch.
This patch add parallel LCD settings and
select menu to Kconfig.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index a87f26121dbabfb20428162f1363df49ac67db14..54b479c35ee01d2db0f2f5c75f9786f329293146 100644 (file)
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -44,6 +44,19 @@ config MACH_AP4EVB
        select ARCH_REQUIRE_GPIOLIB
        select SH_LCD_MIPI_DSI
 
+choice
+       prompt "AP4EVB LCD panel selection"
+       default AP4EVB_QHD
+       depends on MACH_AP4EVB
+
+config AP4EVB_QHD
+       bool "MIPI-DSI QHD (960x540)"
+
+config AP4EVB_WVGA
+       bool "Parallel WVGA (800x480)"
+
+endchoice
+
 comment "SH-Mobile System Configuration"
 
 menu "Memory configuration"

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 5d24d4ec93a799c0bc04b98d06fa0f1ce0db8b3e..e8a9d7990d344e79d247eba72c4ea6f8269720e5 100644 (file)
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -101,14 +101,20 @@
 /*
  * LCD / IRQ / KEYSC / IrDA
  *
- * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (TouchScreen)
- * LCD = 2nd LCDC
+ * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen)
+ * LCD = 2nd LCDC (WVGA)
  *
  *             |               SW43                    |
  * SW3         |       ON              |       OFF     |
  * -------------+-----------------------+---------------+
  * ON          | KEY / IrDA            | LCD           |
  * OFF         | KEY / IrDA / IRQ      | IRQ           |
+ *
+ *
+ * QHD / WVGA display
+ *
+ * You can choice display type on menuconfig.
+ * Then, check above dip-switch.
  */
 
 /*
@@ -226,43 +232,6 @@ static struct platform_device smc911x_device = {
        },
 };
 
-/* KEYSC (Needs SW43 set to ON) */
-static struct sh_keysc_info keysc_info = {
-       .mode           = SH_KEYSC_MODE_1,
-       .scan_timing    = 3,
-       .delay          = 2500,
-       .keycodes = {
-               KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
-               KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,
-               KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
-               KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
-               KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
-       },
-};
-
-static struct resource keysc_resources[] = {
-       [0] = {
-               .name   = "KEYSC",
-               .start  = 0xe61b0000,
-               .end    = 0xe61b0063,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = evt2irq(0x0be0), /* KEYSC_KEY */
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-static struct platform_device keysc_device = {
-       .name           = "sh_keysc",
-       .id             = 0, /* "keysc0" clock */
-       .num_resources  = ARRAY_SIZE(keysc_resources),
-       .resource       = keysc_resources,
-       .dev    = {
-               .platform_data  = &keysc_info,
-       },
-};
-
 /* SH_MMCIF */
 static struct resource sh_mmcif_resources[] = {
        [0] = {
@@ -402,30 +371,10 @@ static struct platform_device usb1_host_device = {
        .resource       = usb1_host_resources,
 };
 
-static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
-       .clock_source = LCDC_CLK_PERIPHERAL, /* One of interface clocks */
+static struct sh_mobile_lcdc_info lcdc_info = {
        .ch[0] = {
                .chan = LCDC_CHAN_MAINLCD,
                .bpp = 16,
-               .interface_type = RGB24,
-               .clock_divider = 1,
-               .flags = LCDC_FLAGS_DWPOL,
-               .lcd_cfg = {
-                       .name = "R63302(QHD)",
-                       .xres = 544,
-                       .yres = 961,
-                       .left_margin = 72,
-                       .right_margin = 600,
-                       .hsync_len = 16,
-                       .upper_margin = 8,
-                       .lower_margin = 8,
-                       .vsync_len = 2,
-                       .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-               },
-               .lcd_size_cfg = {
-                       .width = 44,
-                       .height = 79,
-               },
        }
 };
 
@@ -447,11 +396,54 @@ static struct platform_device lcdc_device = {
        .num_resources  = ARRAY_SIZE(lcdc_resources),
        .resource       = lcdc_resources,
        .dev    = {
-               .platform_data  = &sh_mobile_lcdc_info,
+               .platform_data  = &lcdc_info,
                .coherent_dma_mask = ~0,
        },
 };
 
+/*
+ * QHD display
+ */
+#ifdef CONFIG_AP4EVB_QHD
+
+/* KEYSC (Needs SW43 set to ON) */
+static struct sh_keysc_info keysc_info = {
+       .mode           = SH_KEYSC_MODE_1,
+       .scan_timing    = 3,
+       .delay          = 2500,
+       .keycodes = {
+               KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
+               KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,
+               KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+               KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+               KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+       },
+};
+
+static struct resource keysc_resources[] = {
+       [0] = {
+               .name   = "KEYSC",
+               .start  = 0xe61b0000,
+               .end    = 0xe61b0063,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = evt2irq(0x0be0), /* KEYSC_KEY */
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device keysc_device = {
+       .name           = "sh_keysc",
+       .id             = 0, /* "keysc0" clock */
+       .num_resources  = ARRAY_SIZE(keysc_resources),
+       .resource       = keysc_resources,
+       .dev    = {
+               .platform_data  = &keysc_info,
+       },
+};
+
+/* MIPI-DSI */
 static struct resource mipidsi0_resources[] = {
        [0] = {
                .start  = 0xffc60000,
@@ -462,7 +454,7 @@ static struct resource mipidsi0_resources[] = {
 
 static struct sh_mipi_dsi_info mipidsi0_info = {
        .data_format    = MIPI_RGB888,
-       .lcd_chan       = &sh_mobile_lcdc_info.ch[0],
+       .lcd_chan       = &lcdc_info.ch[0],
 };
 
 static struct platform_device mipidsi0_device = {
@@ -475,6 +467,50 @@ static struct platform_device mipidsi0_device = {
        },
 };
 
+/* This function will disappear when we switch to (runtime) PM */
+static int __init ap4evb_init_display_clk(void)
+{
+       struct clk *lcdc_clk;
+       struct clk *dsitx_clk;
+       int ret;
+
+       lcdc_clk = clk_get(&lcdc_device.dev, "sh_mobile_lcdc_fb.0");
+       if (IS_ERR(lcdc_clk))
+               return PTR_ERR(lcdc_clk);
+
+       dsitx_clk = clk_get(&mipidsi0_device.dev, "sh-mipi-dsi.0");
+       if (IS_ERR(dsitx_clk)) {
+               ret = PTR_ERR(dsitx_clk);
+               goto eclkdsitxget;
+       }
+
+       ret = clk_enable(lcdc_clk);
+       if (ret < 0)
+               goto eclklcdcon;
+
+       ret = clk_enable(dsitx_clk);
+       if (ret < 0)
+               goto eclkdsitxon;
+
+       return 0;
+
+eclkdsitxon:
+       clk_disable(lcdc_clk);
+eclklcdcon:
+       clk_put(dsitx_clk);
+eclkdsitxget:
+       clk_put(lcdc_clk);
+
+       return ret;
+}
+device_initcall(ap4evb_init_display_clk);
+
+static struct platform_device *qhd_devices[] __initdata = {
+       &mipidsi0_device,
+       &keysc_device,
+};
+#endif /* CONFIG_AP4EVB_QHD */
+
 /* FSI */
 #define IRQ_FSI                evt2irq(0x1840)
 #define FSIACKCR       0xE6150018
@@ -532,23 +568,29 @@ static struct platform_device fsi_device = {
 static struct platform_device *ap4evb_devices[] __initdata = {
        &nor_flash_device,
        &smc911x_device,
-       &keysc_device,
        &sdhi0_device,
        &sdhi1_device,
        &usb1_host_device,
        &lcdc_device,
-       &mipidsi0_device,
        &fsi_device,
        &sh_mmcif_device
 };
 
-/* TouchScreen (Needs SW3 set to OFF) */
+/* TouchScreen */
 #define IRQ28  evt2irq(0x3380) /* IRQ28A */
+#define IRQ7   evt2irq(0x02e0) /* IRQ7A */
 static struct tsc2007_platform_data tsc2007_info = {
        .model                  = 2007,
        .x_plate_ohms           = 180,
 };
 
+static struct i2c_board_info tsc_device = {
+       I2C_BOARD_INFO("tsc2007", 0x48),
+       .type           = "tsc2007",
+       .platform_data  = &tsc2007_info,
+       /*.irq is selected on ap4evb_init */
+};
+
 /* I2C */
 static struct i2c_board_info i2c0_devices[] = {
        {
@@ -560,12 +602,6 @@ static struct i2c_board_info i2c1_devices[] = {
        {
                I2C_BOARD_INFO("r2025sd", 0x32),
        },
-       {
-               I2C_BOARD_INFO("tsc2007", 0x48),
-               .type           = "tsc2007",
-               .platform_data  = &tsc2007_info,
-               .irq            = IRQ28,
-       },
 };
 
 static struct map_desc ap4evb_io_desc[] __initdata = {
@@ -589,45 +625,6 @@ static void __init ap4evb_map_io(void)
        shmobile_setup_console();
 }
 
-/* This function will disappear when we switch to (runtime) PM */
-static int __init ap4evb_init_display_clk(void)
-{
-       struct clk *lcdc_clk;
-       struct clk *dsitx_clk;
-       int ret;
-
-       lcdc_clk = clk_get(&lcdc_device.dev, "sh_mobile_lcdc_fb.0");
-       if (IS_ERR(lcdc_clk))
-               return PTR_ERR(lcdc_clk);
-
-       dsitx_clk = clk_get(&mipidsi0_device.dev, "sh-mipi-dsi.0");
-       if (IS_ERR(dsitx_clk)) {
-               ret = PTR_ERR(dsitx_clk);
-               goto eclkdsitxget;
-       }
-
-       ret = clk_enable(lcdc_clk);
-       if (ret < 0)
-               goto eclklcdcon;
-
-       ret = clk_enable(dsitx_clk);
-       if (ret < 0)
-               goto eclkdsitxon;
-
-       return 0;
-
-eclkdsitxon:
-       clk_disable(lcdc_clk);
-eclklcdcon:
-       clk_put(dsitx_clk);
-eclkdsitxget:
-       clk_put(lcdc_clk);
-
-       return ret;
-}
-
-device_initcall(ap4evb_init_display_clk);
-
 /*
  * FIXME !!
  *
@@ -687,18 +684,6 @@ static void __init ap4evb_init(void)
        gpio_export(GPIO_PORT34, 0);
        gpio_export(GPIO_PORT35, 0);
 
-       /* enable KEYSC */
-       gpio_request(GPIO_FN_KEYOUT0, NULL);
-       gpio_request(GPIO_FN_KEYOUT1, NULL);
-       gpio_request(GPIO_FN_KEYOUT2, NULL);
-       gpio_request(GPIO_FN_KEYOUT3, NULL);
-       gpio_request(GPIO_FN_KEYOUT4, NULL);
-       gpio_request(GPIO_FN_KEYIN0_136, NULL);
-       gpio_request(GPIO_FN_KEYIN1_135, NULL);
-       gpio_request(GPIO_FN_KEYIN2_134, NULL);
-       gpio_request(GPIO_FN_KEYIN3_133, NULL);
-       gpio_request(GPIO_FN_KEYIN4,     NULL);
-
        /* SDHI0 */
        gpio_request(GPIO_FN_SDHICD0, NULL);
        gpio_request(GPIO_FN_SDHIWP0, NULL);
@@ -709,9 +694,13 @@ static void __init ap4evb_init(void)
        gpio_request(GPIO_FN_SDHID0_1, NULL);
        gpio_request(GPIO_FN_SDHID0_0, NULL);
 
-       /* enable TouchScreen */
-       gpio_request(GPIO_FN_IRQ28_123, NULL);
-       set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
+       /* SDHI1 */
+       gpio_request(GPIO_FN_SDHICMD1, NULL);
+       gpio_request(GPIO_FN_SDHICLK1, NULL);
+       gpio_request(GPIO_FN_SDHID1_3, NULL);
+       gpio_request(GPIO_FN_SDHID1_2, NULL);
+       gpio_request(GPIO_FN_SDHID1_1, NULL);
+       gpio_request(GPIO_FN_SDHID1_0, NULL);
 
        /* MMCIF */
        gpio_request(GPIO_FN_MMCD0_0, NULL);
@@ -777,13 +766,106 @@ static void __init ap4evb_init(void)
        i2c_register_board_info(1, i2c1_devices,
                                ARRAY_SIZE(i2c1_devices));
 
-       /* SDHI1 */
-       gpio_request(GPIO_FN_SDHICMD1, NULL);
-       gpio_request(GPIO_FN_SDHICLK1, NULL);
-       gpio_request(GPIO_FN_SDHID1_3, NULL);
-       gpio_request(GPIO_FN_SDHID1_2, NULL);
-       gpio_request(GPIO_FN_SDHID1_1, NULL);
-       gpio_request(GPIO_FN_SDHID1_0, NULL);
+#ifdef CONFIG_AP4EVB_QHD
+       /*
+        * QHD
+        */
+
+       /* enable KEYSC */
+       gpio_request(GPIO_FN_KEYOUT0, NULL);
+       gpio_request(GPIO_FN_KEYOUT1, NULL);
+       gpio_request(GPIO_FN_KEYOUT2, NULL);
+       gpio_request(GPIO_FN_KEYOUT3, NULL);
+       gpio_request(GPIO_FN_KEYOUT4, NULL);
+       gpio_request(GPIO_FN_KEYIN0_136, NULL);
+       gpio_request(GPIO_FN_KEYIN1_135, NULL);
+       gpio_request(GPIO_FN_KEYIN2_134, NULL);
+       gpio_request(GPIO_FN_KEYIN3_133, NULL);
+       gpio_request(GPIO_FN_KEYIN4,     NULL);
+
+       /* enable TouchScreen */
+       gpio_request(GPIO_FN_IRQ28_123, NULL);
+       set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
+
+       tsc_device.irq = IRQ28;
+       i2c_register_board_info(1, &tsc_device, 1);
+
+       /* LCDC0 */
+       lcdc_info.clock_source                  = LCDC_CLK_PERIPHERAL;
+       lcdc_info.ch[0].interface_type          = RGB24;
+       lcdc_info.ch[0].clock_divider           = 1;
+       lcdc_info.ch[0].flags                   = LCDC_FLAGS_DWPOL;
+       lcdc_info.ch[0].lcd_cfg.name            = "R63302(QHD)";
+       lcdc_info.ch[0].lcd_cfg.xres            = 544;
+       lcdc_info.ch[0].lcd_cfg.yres            = 961;
+       lcdc_info.ch[0].lcd_cfg.left_margin     = 72;
+       lcdc_info.ch[0].lcd_cfg.right_margin    = 600;
+       lcdc_info.ch[0].lcd_cfg.hsync_len       = 16;
+       lcdc_info.ch[0].lcd_cfg.upper_margin    = 8;
+       lcdc_info.ch[0].lcd_cfg.lower_margin    = 8;
+       lcdc_info.ch[0].lcd_cfg.vsync_len       = 2;
+       lcdc_info.ch[0].lcd_cfg.sync            = FB_SYNC_VERT_HIGH_ACT |
+                                                 FB_SYNC_HOR_HIGH_ACT;
+       lcdc_info.ch[0].lcd_size_cfg.width      = 44;
+       lcdc_info.ch[0].lcd_size_cfg.height     = 79;
+
+       platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices));
+
+#else
+       /*
+        * WVGA
+        */
+       gpio_request(GPIO_FN_LCDD17,   NULL);
+       gpio_request(GPIO_FN_LCDD16,   NULL);
+       gpio_request(GPIO_FN_LCDD15,   NULL);
+       gpio_request(GPIO_FN_LCDD14,   NULL);
+       gpio_request(GPIO_FN_LCDD13,   NULL);
+       gpio_request(GPIO_FN_LCDD12,   NULL);
+       gpio_request(GPIO_FN_LCDD11,   NULL);
+       gpio_request(GPIO_FN_LCDD10,   NULL);
+       gpio_request(GPIO_FN_LCDD9,    NULL);
+       gpio_request(GPIO_FN_LCDD8,    NULL);
+       gpio_request(GPIO_FN_LCDD7,    NULL);
+       gpio_request(GPIO_FN_LCDD6,    NULL);
+       gpio_request(GPIO_FN_LCDD5,    NULL);
+       gpio_request(GPIO_FN_LCDD4,    NULL);
+       gpio_request(GPIO_FN_LCDD3,    NULL);
+       gpio_request(GPIO_FN_LCDD2,    NULL);
+       gpio_request(GPIO_FN_LCDD1,    NULL);
+       gpio_request(GPIO_FN_LCDD0,    NULL);
+       gpio_request(GPIO_FN_LCDDISP,  NULL);
+       gpio_request(GPIO_FN_LCDDCK,   NULL);
+
+       gpio_request(GPIO_PORT189, NULL); /* backlight */
+       gpio_direction_output(GPIO_PORT189, 1);
+
+       gpio_request(GPIO_PORT151, NULL); /* LCDDON */
+       gpio_direction_output(GPIO_PORT151, 1);
+
+       lcdc_info.clock_source                  = LCDC_CLK_BUS;
+       lcdc_info.ch[0].interface_type          = RGB18;
+       lcdc_info.ch[0].clock_divider           = 2;
+       lcdc_info.ch[0].flags                   = 0;
+       lcdc_info.ch[0].lcd_cfg.name            = "WVGA Panel";
+       lcdc_info.ch[0].lcd_cfg.xres            = 800;
+       lcdc_info.ch[0].lcd_cfg.yres            = 480;
+       lcdc_info.ch[0].lcd_cfg.left_margin     = 220;
+       lcdc_info.ch[0].lcd_cfg.right_margin    = 110;
+       lcdc_info.ch[0].lcd_cfg.hsync_len       = 70;
+       lcdc_info.ch[0].lcd_cfg.upper_margin    = 20;
+       lcdc_info.ch[0].lcd_cfg.lower_margin    = 5;
+       lcdc_info.ch[0].lcd_cfg.vsync_len       = 5;
+       lcdc_info.ch[0].lcd_cfg.sync            = 0;
+       lcdc_info.ch[0].lcd_size_cfg.width      = 152;
+       lcdc_info.ch[0].lcd_size_cfg.height     = 91;
+
+       /* enable TouchScreen */
+       gpio_request(GPIO_FN_IRQ7_40, NULL);
+       set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
+
+       tsc_device.irq = IRQ7;
+       i2c_register_board_info(0, &tsc_device, 1);
+#endif /* CONFIG_AP4EVB_QHD */
 
        sh7372_add_standard_devices();