* gas/hppa/reloc/reloc.exp: Tweak expected output to match new

	ELF code.
	* gas/hppa/reloc/roundmode.s: Avoid "S" and "D" modes, ELF does
	not support them.
	* gas/hppa/unsorted/unsorted.exp: Tweak expected output to match
	new ELF code.

diff --git a/gas/testsuite/ChangeLog b/gas/testsuite/ChangeLog
index fe3430985833a067fa34524cbc461ca475fd124c..bd9c577bd617f26d03e212e1e6080feb742ee386 100644 (file)
--- a/gas/testsuite/ChangeLog
+++ b/gas/testsuite/ChangeLog
@@ -1,3 +1,16 @@
+Mon May 16 13:19:16 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+       * gas/hppa/reloc/reloc.exp: Tweak expected output to match new
+       ELF code.
+       * gas/hppa/reloc/roundmode.s: Avoid "S" and "D" modes, ELF does
+       not support them.
+       * gas/hppa/unsorted/unsorted.exp: Tweak expected output to match
+       new ELF code.
+
+Thu May  5 17:27:54 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
+
+       * config/default.exp: Renamed from unix-gas.exp.
+
 Mon Apr 11 10:31:00 1994  Bill Cox  (bill@rtl.cygnus.com)
 
        * Makefile.in (check): Set TCL_LIBRARY for runtest.

diff --git a/gas/testsuite/gas/hppa/reloc/reloc.exp b/gas/testsuite/gas/hppa/reloc/reloc.exp
index c76826cfad5abce0396319f55189bc009e64cfd2..829f07a181f131b2ca9033fa51d991e3dfbb3e6c 100755 (executable)
--- a/gas/testsuite/gas/hppa/reloc/reloc.exp
+++ b/gas/testsuite/gas/hppa/reloc/reloc.exp
@@ -27,15 +27,29 @@ proc do_ble_relocation_test {} {
     if [gas_test_old "blebug.s" "" "Proper relocation for BLE (part 1)"] then {
        objdump_start_no_subdir "a.out" "-r"
 
-       # At one time both versions of the assembler would incorrectly use 
-       # a PC-relative relocation for a BLE instruction.
-       while 1 {
-           expect {
-               -re "^00000004\[^\n\]*ABS_CALL\[^\n\]*\n"       { set x 1 }
-               -re "\[^\n\]*\n"                                { }
-               timeout                         { error "timeout\n"; break }
-               eof                             { break }
+        if ![istarget hppa*-*-*elf*] then {
+           # At one time both versions of the assembler would incorrectly use 
+           # a PC-relative relocation for a BLE instruction.
+           while 1 {
+               expect {
+                   -re "^00000004\[^\n\]*ABS_CALL\[^\n\]*\n"   { set x 1 }
+                   -re "\[^\n\]*\n"                            { }
+                   timeout                     { perror "timeout\n"; break }
+                   eof                         { break }
+               }
+           }
+       } else {
+           # At one time both versions of the assembler would incorrectly use 
+           # a PC-relative relocation for a BLE instruction.
+           while 1 {
+               expect {
+                   -re "^00000000\[^\n\]*DIR21L\[^\n\]*\n"     { set x 1 }
+                   -re "^00000004\[^\n\]*DIR17R\[^\n\]*\n"     { set x 1 }
+                   -re "\[^\n\]*\n"                            { }
+                   timeout                     { perror "timeout\n"; break }
+                   eof                         { break }
                }
+           }
        }
     }
 
@@ -61,10 +75,10 @@ proc do_relocation_reduction_tests {} {
            expect {
                -re "^00000004\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
                    { set x [expr $x+1] }
-               -re "^00000014\[^\n\]*PCREL_CALL\[^\n\]*foo\[^\n\]*\n"
+               -re "^00000014\[^\n\]*PCREL\[^\n\]*foo\[^\n\]*\n"
                    { set x [expr $x+1] }
                -re "\[^\n\]*\n"                { }
-               timeout                         { error "timeout\n"; break }
+               timeout                         { perror "timeout\n"; break }
                eof                             { break }
             }
        }
@@ -90,7 +104,7 @@ proc do_ble_mode_selector_test {} {
            -re "^ +\[0-9\]+ 0000 20202801\[^\n\]*\n"   { set x [expr $x+1] }
            -re "^ +\[0-9\]+ 0004 E420E008\[^\n\]*\n"   { set x [expr $x+1] }
            -re "\[^\n\]*\n"                            { }
-           timeout                             { error "timeout\n"; break }
+           timeout                             { perror "timeout\n"; break }
            eof                                 { break }
        }
     }
@@ -118,7 +132,7 @@ proc do_plabel_relocation_test {} {
                -re "^\[04\]0000004\[^\n\]*PLABEL\[^\n\]*\n"
                    { set x [expr $x+1] }
                -re "\[^\n\]*\n"                        { }
-               timeout                         { error "timeout\n"; break }
+               timeout                         { perror "timeout\n"; break }
                eof                             { break }
            }
        }
@@ -142,15 +156,15 @@ proc do_selector_scope_test {} {
        # Check to make sure the relocation entry after the plabel is correct.
        # If an old field selector was incorrectly "carried" over, then 
        # this test will fail.
-        if [istarget hppa*-*-osf] then {
+        if [istarget hppa*-*-*elf*] then {
            while 1 {
                expect {
-                   -re "^00000014\[^\n\]*HPPA_32\[^\n\]*\n"
+                   -re "^00000014\[^\n\]*DIR32\[^\n\]*\n"
                        { set x 1 }
                    -re "^00000014\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
                        { set x 0 }
                    -re "\[^\n\]*\n"            { }
-                   timeout                     { error "timeout\n"; break }
+                   timeout                     { perror "timeout\n"; break }
                    eof                         { break }
                }
             }
@@ -162,7 +176,7 @@ proc do_selector_scope_test {} {
                    -re "^00000014\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
                        { set x 0 }
                    -re "\[^\n\]*\n"            { }
-                   timeout                     { error "timeout\n"; break }
+                   timeout                     { perror "timeout\n"; break }
                    eof                         { break }
                }
             }
@@ -193,7 +207,7 @@ proc do_local_label_as_operand_test {} {
                -re "^00000030\[^\n\]*0x00000024\[^\n\]*\n" 
                    { set x [expr $x+1] }
                -re "\[^\n\]*\n"                { }
-               timeout                         { error "timeout\n"; break }
+               timeout                         { perror "timeout\n"; break }
                eof                             { break }
             }
        }
@@ -214,7 +228,7 @@ proc do_exit_relocation_test {} {
     # Elf (osf) does not use ENTRY/EXIT relocations.
     # I guess we could look at the unwind subspaces it builds...
     # Until then, make sure it still assembles.
-    if [istarget hppa*-*-osf*] then {
+    if [istarget hppa*-*-*elf*] then {
        gas_test_old "exitbug.s" "" "Test for bogus R_EXIT relocation (part 1)"
        return;
     }
@@ -228,7 +242,7 @@ proc do_exit_relocation_test {} {
                -re "^00000000\[^\n\]*R_EXIT\[^\n\]*\n" 
                    { set x [expr $x+1] }
                -re "\[^\n\]*\n"                { }
-               timeout                         { error "timeout\n"; break }
+               timeout                         { perror "timeout\n"; break }
                eof                             { break }
             }
        }
@@ -247,7 +261,7 @@ proc do_cross_space_fixup_test_1 {} {
     set x 0
 
     # ELF (osf) doesn't really handle extra sections too well...
-    if [istarget hppa*-*-osf*] then {
+    if [istarget hppa*-*-*elf*] then {
        return;
     }
 
@@ -261,7 +275,7 @@ proc do_cross_space_fixup_test_1 {} {
                -re "^00000000\[^\n\]*PCREL_CALL\[^\n\]*\n" 
                    { set x [expr $x+1] }
                -re "\[^\n\]*\n"                { }
-               timeout                         { error "timeout\n"; break }
+               timeout                         { perror "timeout\n"; break }
                eof                             { break }
             }
        }
@@ -280,18 +294,17 @@ proc do_cross_space_fixup_test_2 {} {
     set x 0
 
     # ELF (osf) doesn't really handle extra sections too well...
-    if [istarget hppa*-*-osf*] then {
+    if [istarget hppa*-*-*elf*] then {
        return;
     }
 
-    setup_xfail "hppa*-*-*"
-    gas_start "fixupbug2.s" "-al"
+    gas_start "fixupbug.s" "-al"
 
     while 1 {
        expect {
            -re "^ +\[0-9\]+ 0000 E8000002\[^\n\]*\n"   { set x [expr $x+1] }
            -re "\[^\n\]*\n"                            { }
-           timeout                             { error "timeout\n"; break }
+           timeout                             { perror "timeout\n"; break }
            eof                                 { break }
        }
     }
@@ -314,27 +327,27 @@ proc do_round_mode_test {} {
        # Make sure GAS generated correct relocations to switch rounding modes.
        # Also make sure (for SOM) that redundant rounding mode relocations
        # were eliminated.
-       if [istarget hppa*-*-osf*] then {
+       if [istarget hppa*-*-*elf*] then {
            while 1 {
                expect {
-                   -re "^00000000\[^\n\]*LR21\[^\n\]*\n"
+                   -re "^00000000\[^\n\]*DIR21L\[^\n\]*\n"
                        { set x [expr $x+1] }
-                   -re "^00000004\[^\n\]*RR14\[^\n\]*\n" 
+                   -re "^00000004\[^\n\]*DIR14R\[^\n\]*\n" 
                        { set x [expr $x+1] }
-                   -re "^00000008\[^\n\]*L21\[^\n\]*\n"
+                   -re "^00000008\[^\n\]*DIR21L\[^\n\]*\n"
                        { set x [expr $x+1] }
-                   -re "^0000000c\[^\n\]*R14\[^\n\]*\n" 
+                   -re "^0000000c\[^\n\]*DIR14R\[^\n\]*\n" 
                        { set x [expr $x+1] }
-                   -re "^00000010\[^\n\]*LS21\[^\n\]*\n"
+                   -re "^00000010\[^\n\]*DIR21L\[^\n\]*\n"
                        { set x [expr $x+1] }
-                   -re "^00000014\[^\n\]*RS14\[^\n\]*\n" 
+                   -re "^00000014\[^\n\]*DIR14R\[^\n\]*\n" 
                        { set x [expr $x+1] }
-                   -re "^00000018\[^\n\]*LD21\[^\n\]*\n"
+                   -re "^00000018\[^\n\]*DIR21L\[^\n\]*\n"
                        { set x [expr $x+1] }
-                   -re "^0000001c\[^\n\]*RD14\[^\n\]*\n" 
+                   -re "^0000001c\[^\n\]*DIR14R\[^\n\]*\n" 
                        { set x [expr $x+1] }
                    -re "\[^\n\]*\n"            { }
-               timeout                         { error "timeout\n"; break }
+               timeout                         { perror "timeout\n"; break }
                eof                             { break }
                }
             }
@@ -349,16 +362,16 @@ proc do_round_mode_test {} {
                        { set x [expr $x+1] }
                    -re "^0000000c\[^\n\]*R_N_MODE\[^\n\]*\n" 
                        { fail $testname }
-                   -re "^00000010\[^\n\]*R_S_MODE\[^\n\]*\n"
+                   -re "^00000010\[^\n\]*R_R_MODE\[^\n\]*\n"
                        { set x [expr $x+1] }
-                   -re "^00000014\[^\n\]*R_S_MODE\[^\n\]*\n" 
+                   -re "^00000014\[^\n\]*R_R_MODE\[^\n\]*\n" 
                        { fail $testname }
-                   -re "^00000018\[^\n\]*R_D_MODE\[^\n\]*\n"
+                   -re "^00000018\[^\n\]*R_R_MODE\[^\n\]*\n"
                        { set x [expr $x+1] }
-                   -re "^0000001c\[^\n\]*R_D_MODE\[^\n\]*\n" 
+                   -re "^0000001c\[^\n\]*R_R_MODE\[^\n\]*\n" 
                        { fail $testname }
                    -re "\[^\n\]*\n"            { }
-               timeout                         { error "timeout\n"; break }
+               timeout                         { perror "timeout\n"; break }
                eof                             { break }
                }
            }
@@ -369,7 +382,7 @@ proc do_round_mode_test {} {
        objdump_finish
 
        # Did we find what we were looking for?  If not, flunk it.
-       if [istarget hppa*-*-osf*] then {
+       if [istarget hppa*-*-*elf*] then {
            if [expr $x==8] then { pass $testname } else { fail $testname }
        } else {
            if [expr $x==4] then { pass $testname } else { fail $testname }
@@ -377,6 +390,61 @@ proc do_round_mode_test {} {
     }
 }
 
+proc do_function_reloc_bug {} {
+    set testname "funcrelocbug.s: Test for reloc bug in non-plabel function reference (part 2)"
+    set x 0
+
+    if [gas_test_old "funcrelocbug.s" "" "Test for reloc bug in non-plabel function reference (part 1)"] {
+       objdump_start_no_subdir "a.out" "-r"
+
+       # Make sure GAS generated a correct relocation for the reference.
+       # branch/call
+       while 1 {
+           expect {
+               -re "^000000cc\[^\n\]*f2___4\[^\n+\]*\n" 
+                   { set x [expr $x+1] }
+               -re "^000000d0\[^\n\]*f2___4\[^\n+\]*\n"  
+                   { set x [expr $x+1] }
+               -re "\[^\n\]*\n"                { }
+               timeout                         { perror "timeout\n"; break }
+               eof                             { break }
+            }
+       }
+
+       # This was intended to do any cleanup necessary.  It kinda looks like it
+       # isn't needed, but just in case, please keep it in for now.
+       objdump_finish
+
+       # Did we find what we were looking for?  If not, flunk it.
+       if [expr $x==2] then { pass $testname } else { fail $testname }
+
+       set testname "funcrelocbug.s: Test for reloc bug in non-plabel function reference (part3)"
+       set x 0
+
+       objdump_start_no_subdir "a.out" "-d"
+       # Make sure we didn't put anything in the instruction itself!
+       while 1 {
+           expect {
+               -re "^000000cc\[^\n\]*ldil 0,r20\[^\n\]*\n" 
+                   { set x [expr $x+1] }
+               -re "^000000d0\[^\n\]*ldo 0\[\(\]+r20\[\)\]+,r19\[^\n\]*\n" 
+                   { set x [expr $x+1] }
+               -re "\[^\n\]*\n"                { }
+               timeout                         { perror "timeout\n"; break }
+               eof                             { break }
+           }
+       }
+
+       # This was intended to do any cleanup necessary.  It kinda looks like it
+       # isn't needed, but just in case, please keep it in for now.
+       objdump_finish
+
+       # Did we find what we were looking for?  If not, flunk it.
+       if [expr $x==2] then { pass $testname } else { fail $testname }
+    }
+
+}
+
 if [istarget hppa*-*-*] then {
     # Make sure we put the right relocation entry on a BLE instruction.
     do_ble_relocation_test
@@ -413,4 +481,8 @@ if [istarget hppa*-*-*] then {
 
     # Make sure we switch rounding modes correctly
     do_round_mode_test
+
+    # Test for a bug found when a function was used in a non-branching
+    # instruction *without* a plabel (for portable runtime model)
+    do_function_reloc_bug
 }