regulator: twl: Provide of_map_mode for twl4030
authorIvaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tue, 5 Apr 2016 05:59:34 +0000 (08:59 +0300)
committerMark Brown <broonie@kernel.org>
Tue, 5 Apr 2016 18:35:33 +0000 (11:35 -0700)
of_map_mode is needed so to be possible to set initial regulators mode from
the board DTS. Otherwise, for DT boot, regulators are left in their default
state after reset/reboot. Document device specific modes as well.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Documentation/devicetree/bindings/regulator/twl-regulator.txt
drivers/regulator/twl-regulator.c

index 75b0c1669504cf042dc706b4c9102037b707985e..74a91c4f8530a4cd17cb5d184554c6cd283163e8 100644 (file)
@@ -57,6 +57,12 @@ For twl4030 regulators/LDOs
 
 Optional properties:
 - Any optional property defined in bindings/regulator/regulator.txt
+For twl4030 regulators/LDOs:
+ - regulator-initial-mode:
+  - 0x08 - Sleep mode, the nominal output voltage is maintained with low power
+           consumption with low load current capability.
+  - 0x0e - Active mode, the regulator can deliver its nominal output voltage
+           with full-load current capability.
 
 Example:
 
index 7355616194abcea67239a06a0da6f73585fe9e10..11c6a5c98c467b3afd9218594d2a7e8920bfae95 100644 (file)
@@ -387,6 +387,18 @@ static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
        return twl4030_send_pb_msg(message);
 }
 
+static inline unsigned int twl4030reg_map_mode(unsigned int mode)
+{
+       switch (mode) {
+       case RES_STATE_ACTIVE:
+               return REGULATOR_MODE_NORMAL;
+       case RES_STATE_SLEEP:
+               return REGULATOR_MODE_STANDBY;
+       default:
+               return -EINVAL;
+       }
+}
+
 static int twl6030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
 {
        struct twlreg_info      *info = rdev_get_drvdata(rdev);
@@ -889,10 +901,11 @@ static struct regulator_ops twlsmps_ops = {
 #define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
                        remap_conf) \
                TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
-                       remap_conf, TWL4030, twl4030fixed_ops)
+                       remap_conf, TWL4030, twl4030fixed_ops, \
+                       twl4030reg_map_mode)
 #define TWL6030_FIXED_LDO(label, offset, mVolts, turnon_delay) \
                TWL_FIXED_LDO(label, offset, mVolts, 0x0, turnon_delay, \
-                       0x0, TWL6030, twl6030fixed_ops)
+                       0x0, TWL6030, twl6030fixed_ops, 0x0)
 
 #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \
 static const struct twlreg_info TWL4030_INFO_##label = { \
@@ -909,6 +922,7 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
                .type = REGULATOR_VOLTAGE, \
                .owner = THIS_MODULE, \
                .enable_time = turnon_delay, \
+               .of_map_mode = twl4030reg_map_mode, \
                }, \
        }
 
@@ -924,6 +938,7 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
                .type = REGULATOR_VOLTAGE, \
                .owner = THIS_MODULE, \
                .enable_time = turnon_delay, \
+               .of_map_mode = twl4030reg_map_mode, \
                }, \
        }
 
@@ -969,7 +984,7 @@ static const struct twlreg_info TWL6032_INFO_##label = { \
        }
 
 #define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \
-               family, operations) \
+               family, operations, map_mode) \
 static const struct twlreg_info TWLFIXED_INFO_##label = { \
        .base = offset, \
        .id = num, \
@@ -984,6 +999,7 @@ static const struct twlreg_info TWLFIXED_INFO_##label = { \
                .owner = THIS_MODULE, \
                .min_uV = mVolts * 1000, \
                .enable_time = turnon_delay, \
+               .of_map_mode = map_mode, \
                }, \
        }
 
This page took 0.026903 seconds and 5 git commands to generate.