Blackfin: rename some Blackfin drivers

Try to keep the naming conventions consistent, so:
	SPI_ADC_BF533 -> BFIN_SPI_ADC
	TWI_LCD       -> BFIN_TWI_LCD

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 602dce028b7b26e65624b82f326d68970b174608..62bba09bcce689dfe908b5b702e76fb20877921f 100644 (file)
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -166,8 +166,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
@@ -253,8 +253,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -518,7 +518,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
        {
                I2C_BOARD_INFO("pcf8574_lcd", 0x22),
        },

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 48e69eecdba42b4e690b146b71866f1127c6d6e8..6d6f9effa0bb8e36f38f99ba9f7a8cfdb6798b16 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -463,8 +463,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
@@ -554,8 +554,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -789,7 +789,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
        {
                I2C_BOARD_INFO("pcf8574_lcd", 0x22),
                .type = "pcf8574_lcd",

diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 7fe480e4ebe83c1022e275373cc1d77550091c20..1435c5d38cd515127d5f6b16f60fc084f8c96287 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -247,8 +247,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
@@ -354,8 +354,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -586,7 +586,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
        {
                I2C_BOARD_INFO("pcf8574_lcd", 0x22),
        },

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 9ab8d8cf4a0580162c54b844afec246c9e30ac54..147edd1eb1ad44f52850a8d9977a36dbbfd5aab0 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -485,8 +485,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
@@ -600,8 +600,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -854,7 +854,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
        {
                I2C_BOARD_INFO("pcf8574_lcd", 0x22),
        },

diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 0c66bf44cfab81629e22c4d619d294dd87ded2d1..895f213ea454d11038c536a5c0e9645093e6ea51 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -173,7 +173,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .ctl_reg = 0x1000,
@@ -216,7 +216,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 4,     /* actual baudrate is SCLK/(2xspeed_hz) */

diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index e8974878d8c2807dc34bb2baa4b5822959558a5c..a727e538fa2857e128baa6d9b61a73f0c06b8eb0 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -82,7 +82,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 #endif
 
 /* SPI ADC chip */
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
        .bits_per_word = 16,
@@ -117,7 +117,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */

diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 08cd0969de475a98b6b82670b80825fab8e0a891..842f1c9c239336e684bc2f7fd7ad0d733a27ffb7 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -118,7 +118,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
@@ -154,7 +154,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index db96f33f72e238ee5d4c64178232859a692645cf..e19c565ade160e4639c4f17bddf4c4e13c17c225 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -192,7 +192,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
@@ -237,7 +237,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -448,7 +448,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
                .irq = 39,
        },
 #endif
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
        {
                I2C_BOARD_INFO("pcf8574_lcd", 0x22),
        },

diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 41c75b9bfac03dde78f1269738fd750193efe4a2..4fee196731279f5eb86a794be4894d6eefb114db 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
@@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */

diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 4e1de1e53f89f396a38ff5faf71fa04300434381..26707ce39f29b98666593b011deb89c8912e5ede 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -265,8 +265,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
@@ -333,8 +333,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9bd0a809641bfb27cd20d4375a5aa9dfb64a225d..f56289a66ff2c5837ce909da0fec789ef00b034e 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -508,8 +508,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
@@ -695,8 +695,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .mode = SPI_MODE_3,
        },
 #endif
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -1280,7 +1280,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
                .irq = IRQ_PF5,
        },
 #endif
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
        {
                I2C_BOARD_INFO("pcf8574_lcd", 0x22),
        },

diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 53ad10f3cd76fb5a7fe945f032e80a172dc0f7fd..280574591201e54b98b61d65513d6d92d79098a3 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -86,7 +86,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
@@ -129,7 +129,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 096e661700a7d666ab4534edbdb847a83975100f..2780e4193728bdbf0d85c83f005b74f6ccf0f07b 100644 (file)
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -786,7 +786,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 
 #if !defined(CONFIG_BF542)     /* The BF542 only has 1 TWI */
 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
        {
                I2C_BOARD_INFO("pcf8574_lcd", 0x22),
        },

diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index f623c6b0719fbc2711f1942e19e4a7143f359c4a..0dd9685e5d53f967e9e76a3aea1a317f983c8911 100644 (file)
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -83,7 +83,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
@@ -126,7 +126,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */