# Makefile for the linux kernel.
#
-obj-y := core.o versatile_dt.o
+obj-y := versatile_dt.o
+++ /dev/null
-/*
- * linux/arch/arm/mach-versatile/core.c
- *
- * Copyright (C) 1999 - 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/of_platform.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
-#include <linux/amba/mmci.h>
-#include <linux/io.h>
-#include <linux/mtd/physmap.h>
-#include <linux/reboot.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-#include "core.h"
-
-static struct map_desc versatile_io_desc[] __initdata __maybe_unused = {
- {
- .virtual = IO_ADDRESS(VERSATILE_SYS_BASE),
- .pfn = __phys_to_pfn(VERSATILE_SYS_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
- .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE),
- .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE),
- .length = SZ_4K * 9,
- .type = MT_DEVICE
- },
- {
- .virtual = IO_ADDRESS(VERSATILE_IB2_BASE),
- .pfn = __phys_to_pfn(VERSATILE_IB2_BASE),
- .length = SZ_64M,
- .type = MT_DEVICE
- },
-};
-
-void __init versatile_map_io(void)
-{
- debug_ll_io_init();
- iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
-}
-
-
-#define VERSATILE_FLASHCTRL (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
-
-static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
-{
- u32 val;
-
- val = __raw_readl(VERSATILE_FLASHCTRL);
- if (on)
- val |= VERSATILE_FLASHPROG_FLVPPEN;
- else
- val &= ~VERSATILE_FLASHPROG_FLVPPEN;
- __raw_writel(val, VERSATILE_FLASHCTRL);
-}
-
-static struct physmap_flash_data versatile_flash_data = {
- .width = 4,
- .set_vpp = versatile_flash_set_vpp,
-};
-
-static struct resource versatile_flash_resource = {
- .start = VERSATILE_FLASH_BASE,
- .end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-struct platform_device versatile_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &versatile_flash_data,
- },
- .num_resources = 1,
- .resource = &versatile_flash_resource,
-};
-
-#define VERSATILE_SYSMCI (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
-
-unsigned int mmc_status(struct device *dev)
-{
- struct amba_device *adev = container_of(dev, struct amba_device, dev);
- u32 mask;
-
- if (adev->res.start == VERSATILE_MMCI0_BASE)
- mask = 1;
- else
- mask = 2;
-
- return readl(VERSATILE_SYSMCI) & mask;
-}
-
-static struct mmci_platform_data mmc0_plat_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .status = mmc_status,
- .gpio_wp = -1,
- .gpio_cd = -1,
-};
-
-static struct mmci_platform_data mmc1_plat_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .status = mmc_status,
- .gpio_wp = -1,
- .gpio_cd = -1,
-};
-
-/*
- * CLCD support.
- */
-#define SYS_CLCD_MODE_MASK (3 << 0)
-#define SYS_CLCD_MODE_888 (0 << 0)
-#define SYS_CLCD_MODE_5551 (1 << 0)
-#define SYS_CLCD_MODE_565_RLSB (2 << 0)
-#define SYS_CLCD_MODE_565_BLSB (3 << 0)
-#define SYS_CLCD_NLCDIOON (1 << 2)
-#define SYS_CLCD_VDDPOSSWITCH (1 << 3)
-#define SYS_CLCD_PWR3V5SWITCH (1 << 4)
-#define SYS_CLCD_ID_MASK (0x1f << 8)
-#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
-#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
-#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
-#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
-#define SYS_CLCD_ID_VGA (0x1f << 8)
-
-static bool is_sanyo_2_5_lcd;
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void versatile_clcd_disable(struct clcd_fb *fb)
-{
- void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
- u32 val;
-
- val = readl(sys_clcd);
- val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
- writel(val, sys_clcd);
-
- /*
- * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
- */
- if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
- void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
- unsigned long ctrl;
-
- ctrl = readl(versatile_ib2_ctrl);
- ctrl &= ~0x01;
- writel(ctrl, versatile_ib2_ctrl);
- }
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void versatile_clcd_enable(struct clcd_fb *fb)
-{
- struct fb_var_screeninfo *var = &fb->fb.var;
- void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
- u32 val;
-
- val = readl(sys_clcd);
- val &= ~SYS_CLCD_MODE_MASK;
-
- switch (var->green.length) {
- case 5:
- val |= SYS_CLCD_MODE_5551;
- break;
- case 6:
- if (var->red.offset == 0)
- val |= SYS_CLCD_MODE_565_RLSB;
- else
- val |= SYS_CLCD_MODE_565_BLSB;
- break;
- case 8:
- val |= SYS_CLCD_MODE_888;
- break;
- }
-
- /*
- * Set the MUX
- */
- writel(val, sys_clcd);
-
- /*
- * And now enable the PSUs
- */
- val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
- writel(val, sys_clcd);
-
- /*
- * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
- */
- if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
- void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
- unsigned long ctrl;
-
- ctrl = readl(versatile_ib2_ctrl);
- ctrl |= 0x01;
- writel(ctrl, versatile_ib2_ctrl);
- }
-}
-
-/*
- * Detect which LCD panel is connected, and return the appropriate
- * clcd_panel structure. Note: we do not have any information on
- * the required timings for the 8.4in panel, so we presently assume
- * VGA timings.
- */
-static int versatile_clcd_setup(struct clcd_fb *fb)
-{
- void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
- const char *panel_name;
- u32 val;
-
- is_sanyo_2_5_lcd = false;
-
- val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
- if (val == SYS_CLCD_ID_SANYO_3_8)
- panel_name = "Sanyo TM38QV67A02A";
- else if (val == SYS_CLCD_ID_SANYO_2_5) {
- panel_name = "Sanyo QVGA Portrait";
- is_sanyo_2_5_lcd = true;
- } else if (val == SYS_CLCD_ID_EPSON_2_2)
- panel_name = "Epson L2F50113T00";
- else if (val == SYS_CLCD_ID_VGA)
- panel_name = "VGA";
- else {
- printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
- val);
- panel_name = "VGA";
- }
-
- fb->panel = versatile_clcd_get_panel(panel_name);
- if (!fb->panel)
- return -EINVAL;
-
- return versatile_clcd_setup_dma(fb, SZ_1M);
-}
-
-static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
-{
- clcdfb_decode(fb, regs);
-
- /* Always clear BGR for RGB565: we do the routing externally */
- if (fb->fb.var.green.length == 6)
- regs->cntl &= ~CNTL_BGR;
-}
-
-static struct clcd_board clcd_plat_data = {
- .name = "Versatile",
- .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
- .check = clcdfb_check,
- .decode = versatile_clcd_decode,
- .disable = versatile_clcd_disable,
- .enable = versatile_clcd_enable,
- .setup = versatile_clcd_setup,
- .mmap = versatile_clcd_mmap_dma,
- .remove = versatile_clcd_remove_dma,
-};
-
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate(). Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
- OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data),
-
- OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
-
- {}
-};
-
-void versatile_restart(enum reboot_mode mode, const char *cmd)
-{
- void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
- u32 val;
-
- val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET);
- val |= 0x105;
-
- __raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET);
- __raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET);
- __raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET);
-}
-
-/* Early initializations */
-void __init versatile_init_early(void)
-{
- u32 val;
-
- /*
- * set clock frequency:
- * VERSATILE_REFCLK is 32KHz
- * VERSATILE_TIMCLK is 1MHz
- */
- val = readl(__io_address(VERSATILE_SCTL_BASE));
- writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
- (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
- (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
- (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
- __io_address(VERSATILE_SCTL_BASE));
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-versatile/core.h
- *
- * Copyright (C) 2004 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_VERSATILE_H
-#define __ASM_ARCH_VERSATILE_H
-
-#include <linux/amba/bus.h>
-#include <linux/of_platform.h>
-#include <linux/reboot.h>
-
-extern struct platform_device versatile_flash_device;
-
-extern void __init versatile_init_early(void);
-extern void __init versatile_init_irq(void);
-extern void __init versatile_map_io(void);
-extern void versatile_timer_init(void);
-extern void versatile_restart(enum reboot_mode, const char *);
-extern unsigned int mmc_status(struct device *dev);
-#ifdef CONFIG_OF
-extern struct of_dev_auxdata versatile_auxdata_lookup[];
-#endif
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-versatile/include/mach/hardware.h
- *
- * This file contains the hardware definitions of the Versatile boards.
- *
- * Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* macro to get at MMIO space when running virtually */
-#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
-
-#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n))
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-versatile/include/mach/platform.h
- *
- * Copyright (c) ARM Limited 2003. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __address_h
-#define __address_h 1
-
-/*
- * Memory definitions
- */
-#define VERSATILE_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/
-#define VERSATILE_BOOT_ROM_HI 0x30000000
-#define VERSATILE_BOOT_ROM_BASE VERSATILE_BOOT_ROM_HI /* Normal position */
-#define VERSATILE_BOOT_ROM_SIZE SZ_64M
-
-#define VERSATILE_SSRAM_BASE /* VERSATILE_SSMC_BASE ? */
-#define VERSATILE_SSRAM_SIZE SZ_2M
-
-#define VERSATILE_FLASH_BASE 0x34000000
-#define VERSATILE_FLASH_SIZE SZ_64M
-
-/*
- * SDRAM
- */
-#define VERSATILE_SDRAM_BASE 0x00000000
-
-/*
- * Logic expansion modules
- *
- */
-
-
-/* ------------------------------------------------------------------------
- * Versatile Registers
- * ------------------------------------------------------------------------
- *
- */
-#define VERSATILE_SYS_ID_OFFSET 0x00
-#define VERSATILE_SYS_SW_OFFSET 0x04
-#define VERSATILE_SYS_LED_OFFSET 0x08
-#define VERSATILE_SYS_OSC0_OFFSET 0x0C
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC1_OFFSET 0x10
-#define VERSATILE_SYS_OSC2_OFFSET 0x14
-#define VERSATILE_SYS_OSC3_OFFSET 0x18
-#define VERSATILE_SYS_OSC4_OFFSET 0x1C
-#elif defined(CONFIG_MACH_VERSATILE_AB)
-#define VERSATILE_SYS_OSC1_OFFSET 0x1C
-#endif
-
-#define VERSATILE_SYS_OSCCLCD_OFFSET 0x1c
-
-#define VERSATILE_SYS_LOCK_OFFSET 0x20
-#define VERSATILE_SYS_100HZ_OFFSET 0x24
-#define VERSATILE_SYS_CFGDATA1_OFFSET 0x28
-#define VERSATILE_SYS_CFGDATA2_OFFSET 0x2C
-#define VERSATILE_SYS_FLAGS_OFFSET 0x30
-#define VERSATILE_SYS_FLAGSSET_OFFSET 0x30
-#define VERSATILE_SYS_FLAGSCLR_OFFSET 0x34
-#define VERSATILE_SYS_NVFLAGS_OFFSET 0x38
-#define VERSATILE_SYS_NVFLAGSSET_OFFSET 0x38
-#define VERSATILE_SYS_NVFLAGSCLR_OFFSET 0x3C
-#define VERSATILE_SYS_RESETCTL_OFFSET 0x40
-#define VERSATILE_SYS_PCICTL_OFFSET 0x44
-#define VERSATILE_SYS_MCI_OFFSET 0x48
-#define VERSATILE_SYS_FLASH_OFFSET 0x4C
-#define VERSATILE_SYS_CLCD_OFFSET 0x50
-#define VERSATILE_SYS_CLCDSER_OFFSET 0x54
-#define VERSATILE_SYS_BOOTCS_OFFSET 0x58
-#define VERSATILE_SYS_24MHz_OFFSET 0x5C
-#define VERSATILE_SYS_MISC_OFFSET 0x60
-#define VERSATILE_SYS_TEST_OSC0_OFFSET 0x80
-#define VERSATILE_SYS_TEST_OSC1_OFFSET 0x84
-#define VERSATILE_SYS_TEST_OSC2_OFFSET 0x88
-#define VERSATILE_SYS_TEST_OSC3_OFFSET 0x8C
-#define VERSATILE_SYS_TEST_OSC4_OFFSET 0x90
-
-#define VERSATILE_SYS_BASE 0x10000000
-#define VERSATILE_SYS_ID (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
-#define VERSATILE_SYS_SW (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
-#define VERSATILE_SYS_LED (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
-#define VERSATILE_SYS_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
-#define VERSATILE_SYS_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
-#define VERSATILE_SYS_OSC3 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
-#define VERSATILE_SYS_OSC4 (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
-#endif
-
-#define VERSATILE_SYS_LOCK (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
-#define VERSATILE_SYS_100HZ (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
-#define VERSATILE_SYS_CFGDATA1 (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
-#define VERSATILE_SYS_CFGDATA2 (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
-#define VERSATILE_SYS_FLAGS (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
-#define VERSATILE_SYS_FLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
-#define VERSATILE_SYS_FLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
-#define VERSATILE_SYS_NVFLAGS (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
-#define VERSATILE_SYS_NVFLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
-#define VERSATILE_SYS_NVFLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
-#define VERSATILE_SYS_RESETCTL (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
-#define VERSATILE_SYS_PCICTL (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
-#define VERSATILE_SYS_MCI (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
-#define VERSATILE_SYS_FLASH (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
-#define VERSATILE_SYS_CLCD (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
-#define VERSATILE_SYS_CLCDSER (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
-#define VERSATILE_SYS_BOOTCS (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
-#define VERSATILE_SYS_24MHz (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
-#define VERSATILE_SYS_MISC (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
-#define VERSATILE_SYS_TEST_OSC0 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
-#define VERSATILE_SYS_TEST_OSC1 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
-#define VERSATILE_SYS_TEST_OSC2 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
-#define VERSATILE_SYS_TEST_OSC3 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
-#define VERSATILE_SYS_TEST_OSC4 (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
-
-/*
- * Values for VERSATILE_SYS_RESET_CTRL
- */
-#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR 0x01
-#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT 0x02
-#define VERSATILE_SYS_CTRL_RESET_DLLRESET 0x03
-#define VERSATILE_SYS_CTRL_RESET_PLLRESET 0x04
-#define VERSATILE_SYS_CTRL_RESET_POR 0x05
-#define VERSATILE_SYS_CTRL_RESET_DoC 0x06
-
-#define VERSATILE_SYS_CTRL_LED (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- * Versatile control registers
- * ------------------------------------------------------------------------
- */
-
-/*
- * VERSATILE_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4 = build value
- * 3:0 = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * VERSATILE_SYS_LOCK
- * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL,
- * SYS_CLD, SYS_BOOTCS
- */
-#define VERSATILE_SYS_LOCK_LOCKED (1 << 16)
-#define VERSATILE_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */
-
-/*
- * VERSATILE_SYS_FLASH
- */
-#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */
-
-/*
- * VERSATILE_INTREG
- * - used to acknowledge and control MMCI and UART interrupts
- */
-#define VERSATILE_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */
-#define VERSATILE_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */
-#define VERSATILE_INTREG_CARDIN 0x08 /* MMCI card in detect */
- /* write 1 to acknowledge and clear */
-#define VERSATILE_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */
-#define VERSATILE_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */
-
-/*
- * VERSATILE peripheral addresses
- */
-#define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */
-#define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */
-#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */
-#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */
-#define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */
-
-/*
- * LED settings, bits [7:0]
- */
-#define VERSATILE_SYS_LED0 (1 << 0)
-#define VERSATILE_SYS_LED1 (1 << 1)
-#define VERSATILE_SYS_LED2 (1 << 2)
-#define VERSATILE_SYS_LED3 (1 << 3)
-#define VERSATILE_SYS_LED4 (1 << 4)
-#define VERSATILE_SYS_LED5 (1 << 5)
-#define VERSATILE_SYS_LED6 (1 << 6)
-#define VERSATILE_SYS_LED7 (1 << 7)
-
-#define ALL_LEDS 0xFF
-
-#define LED_BANK VERSATILE_SYS_LED
-
-/*
- * Control registers
- */
-#define VERSATILE_IDFIELD_OFFSET 0x0 /* Versatile build information */
-#define VERSATILE_FLASHPROG_OFFSET 0x4 /* Flash devices */
-#define VERSATILE_INTREG_OFFSET 0x8 /* Interrupt control */
-#define VERSATILE_DECODE_OFFSET 0xC /* Fitted logic modules */
-
-/*
- * System controller bit assignment
- */
-#define VERSATILE_REFCLK 0
-#define VERSATILE_TIMCLK 1
-
-#define VERSATILE_TIMER1_EnSel 15
-#define VERSATILE_TIMER2_EnSel 17
-#define VERSATILE_TIMER3_EnSel 19
-#define VERSATILE_TIMER4_EnSel 21
-
-
-/*
- * IB2 Versatile/AB expansion board definitions
- */
-/* VICINTSOURCE27 */
-#define VERSATILE_IB2_INT_BASE (VERSATILE_IB2_BASE + 0x02000000)
-#define VERSATILE_IB2_IER (VERSATILE_IB2_INT_BASE + 0)
-#define VERSATILE_IB2_ISR (VERSATILE_IB2_INT_BASE + 4)
-
-#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000)
-#define VERSATILE_IB2_CTRL (VERSATILE_IB2_CTL_BASE + 0)
-#define VERSATILE_IB2_STAT (VERSATILE_IB2_CTL_BASE + 4)
-
-#endif
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
+#include <linux/amba/mmci.h>
+#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
-#include "core.h"
+/* macro to get at MMIO space when running virtually */
+#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n))
+/*
+ * Memory definitions
+ */
+#define VERSATILE_FLASH_BASE 0x34000000
+#define VERSATILE_FLASH_SIZE SZ_64M
+
+/*
+ * ------------------------------------------------------------------------
+ * Versatile Registers
+ * ------------------------------------------------------------------------
+ */
+#define VERSATILE_SYS_LOCK_OFFSET 0x20
+#define VERSATILE_SYS_RESETCTL_OFFSET 0x40
#define VERSATILE_SYS_PCICTL_OFFSET 0x44
+#define VERSATILE_SYS_MCI_OFFSET 0x48
+#define VERSATILE_SYS_FLASH_OFFSET 0x4C
+#define VERSATILE_SYS_CLCD_OFFSET 0x50
+
+/*
+ * VERSATILE_SYS_FLASH
+ */
+#define VERSATILE_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */
+
+/*
+ * VERSATILE peripheral addresses
+ */
+#define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */
+#define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */
+#define VERSATILE_CLCD_BASE 0x10120000 /* CLCD */
+#define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */
+#define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */
+#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000)
+
+/*
+ * System controller bit assignment
+ */
+#define VERSATILE_REFCLK 0
+#define VERSATILE_TIMCLK 1
+
+#define VERSATILE_TIMER1_EnSel 15
+#define VERSATILE_TIMER2_EnSel 17
+#define VERSATILE_TIMER3_EnSel 19
+#define VERSATILE_TIMER4_EnSel 21
+
static void __iomem *versatile_sys_base;
+static void __iomem *versatile_ib2_ctrl;
+
+static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
+{
+ u32 val;
+
+ val = readl(versatile_sys_base + VERSATILE_SYS_FLASH_OFFSET);
+ if (on)
+ val |= VERSATILE_FLASHPROG_FLVPPEN;
+ else
+ val &= ~VERSATILE_FLASHPROG_FLVPPEN;
+ writel(val, versatile_sys_base + VERSATILE_SYS_FLASH_OFFSET);
+}
+
+static struct physmap_flash_data versatile_flash_data = {
+ .width = 4,
+ .set_vpp = versatile_flash_set_vpp,
+};
+
+static struct resource versatile_flash_resource = {
+ .start = VERSATILE_FLASH_BASE,
+ .end = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+struct platform_device versatile_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &versatile_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &versatile_flash_resource,
+};
+
+unsigned int mmc_status(struct device *dev)
+{
+ struct amba_device *adev = container_of(dev, struct amba_device, dev);
+ u32 mask;
+
+ if (adev->res.start == VERSATILE_MMCI0_BASE)
+ mask = 1;
+ else
+ mask = 2;
+
+ return readl(versatile_sys_base + VERSATILE_SYS_MCI_OFFSET) & mask;
+}
+
+static struct mmci_platform_data mmc0_plat_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .status = mmc_status,
+ .gpio_wp = -1,
+ .gpio_cd = -1,
+};
+
+static struct mmci_platform_data mmc1_plat_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .status = mmc_status,
+ .gpio_wp = -1,
+ .gpio_cd = -1,
+};
+
+/*
+ * CLCD support.
+ */
+#define SYS_CLCD_MODE_MASK (3 << 0)
+#define SYS_CLCD_MODE_888 (0 << 0)
+#define SYS_CLCD_MODE_5551 (1 << 0)
+#define SYS_CLCD_MODE_565_RLSB (2 << 0)
+#define SYS_CLCD_MODE_565_BLSB (3 << 0)
+#define SYS_CLCD_NLCDIOON (1 << 2)
+#define SYS_CLCD_VDDPOSSWITCH (1 << 3)
+#define SYS_CLCD_PWR3V5SWITCH (1 << 4)
+#define SYS_CLCD_ID_MASK (0x1f << 8)
+#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
+#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
+#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
+#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
+#define SYS_CLCD_ID_VGA (0x1f << 8)
+
+static bool is_sanyo_2_5_lcd;
+
+/*
+ * Disable all display connectors on the interface module.
+ */
+static void versatile_clcd_disable(struct clcd_fb *fb)
+{
+ void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
+ u32 val;
+
+ val = readl(sys_clcd);
+ val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+ writel(val, sys_clcd);
+
+ /*
+ * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
+ */
+ if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
+ unsigned long ctrl;
+
+ ctrl = readl(versatile_ib2_ctrl);
+ ctrl &= ~0x01;
+ writel(ctrl, versatile_ib2_ctrl);
+ }
+}
+
+/*
+ * Enable the relevant connector on the interface module.
+ */
+static void versatile_clcd_enable(struct clcd_fb *fb)
+{
+ struct fb_var_screeninfo *var = &fb->fb.var;
+ void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
+ u32 val;
+
+ val = readl(sys_clcd);
+ val &= ~SYS_CLCD_MODE_MASK;
+
+ switch (var->green.length) {
+ case 5:
+ val |= SYS_CLCD_MODE_5551;
+ break;
+ case 6:
+ if (var->red.offset == 0)
+ val |= SYS_CLCD_MODE_565_RLSB;
+ else
+ val |= SYS_CLCD_MODE_565_BLSB;
+ break;
+ case 8:
+ val |= SYS_CLCD_MODE_888;
+ break;
+ }
+
+ /*
+ * Set the MUX
+ */
+ writel(val, sys_clcd);
+
+ /*
+ * And now enable the PSUs
+ */
+ val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+ writel(val, sys_clcd);
+
+ /*
+ * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
+ */
+ if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
+ unsigned long ctrl;
+
+ ctrl = readl(versatile_ib2_ctrl);
+ ctrl |= 0x01;
+ writel(ctrl, versatile_ib2_ctrl);
+ }
+}
+
+/*
+ * Detect which LCD panel is connected, and return the appropriate
+ * clcd_panel structure. Note: we do not have any information on
+ * the required timings for the 8.4in panel, so we presently assume
+ * VGA timings.
+ */
+static int versatile_clcd_setup(struct clcd_fb *fb)
+{
+ void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
+ const char *panel_name;
+ u32 val;
+
+ is_sanyo_2_5_lcd = false;
+
+ val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
+ if (val == SYS_CLCD_ID_SANYO_3_8)
+ panel_name = "Sanyo TM38QV67A02A";
+ else if (val == SYS_CLCD_ID_SANYO_2_5) {
+ panel_name = "Sanyo QVGA Portrait";
+ is_sanyo_2_5_lcd = true;
+ } else if (val == SYS_CLCD_ID_EPSON_2_2)
+ panel_name = "Epson L2F50113T00";
+ else if (val == SYS_CLCD_ID_VGA)
+ panel_name = "VGA";
+ else {
+ printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
+ val);
+ panel_name = "VGA";
+ }
+
+ fb->panel = versatile_clcd_get_panel(panel_name);
+ if (!fb->panel)
+ return -EINVAL;
+
+ return versatile_clcd_setup_dma(fb, SZ_1M);
+}
+
+static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
+{
+ clcdfb_decode(fb, regs);
+
+ /* Always clear BGR for RGB565: we do the routing externally */
+ if (fb->fb.var.green.length == 6)
+ regs->cntl &= ~CNTL_BGR;
+}
+
+static struct clcd_board clcd_plat_data = {
+ .name = "Versatile",
+ .caps = CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
+ .check = clcdfb_check,
+ .decode = versatile_clcd_decode,
+ .disable = versatile_clcd_disable,
+ .enable = versatile_clcd_enable,
+ .setup = versatile_clcd_setup,
+ .mmap = versatile_clcd_mmap_dma,
+ .remove = versatile_clcd_remove_dma,
+};
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data),
+ OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
+ {}
+};
+
+static struct map_desc versatile_io_desc[] __initdata __maybe_unused = {
+ {
+ .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE),
+ .length = SZ_4K * 9,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init versatile_map_io(void)
+{
+ debug_ll_io_init();
+ iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
+}
+
+static void __init versatile_init_early(void)
+{
+ u32 val;
+
+ /*
+ * set clock frequency:
+ * VERSATILE_REFCLK is 32KHz
+ * VERSATILE_TIMCLK is 1MHz
+ */
+ val = readl(__io_address(VERSATILE_SCTL_BASE));
+ writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
+ (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
+ (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
+ (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
+ __io_address(VERSATILE_SCTL_BASE));
+}
+
+static void versatile_restart(enum reboot_mode mode, const char *cmd)
+{
+ u32 val;
+
+ val = readl(versatile_sys_base + VERSATILE_SYS_RESETCTL_OFFSET);
+ val |= 0x105;
+
+ writel(0xa05f, versatile_sys_base + VERSATILE_SYS_LOCK_OFFSET);
+ writel(val, versatile_sys_base + VERSATILE_SYS_RESETCTL_OFFSET);
+ writel(0, versatile_sys_base + VERSATILE_SYS_LOCK_OFFSET);
+}
static void __init versatile_dt_pci_init(void)
{
versatile_sys_base = of_iomap(np, 0);
WARN_ON(!versatile_sys_base);
+ versatile_ib2_ctrl = ioremap(VERSATILE_IB2_CTL_BASE, SZ_4K);
+
versatile_dt_pci_init();
platform_device_register(&versatile_flash_device);
projects / deliverable / linux.git / commitdiff
