can: flexcan: Check the return value from clk_prepare_enable()

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 9ca27e23b0b772266701cec42ac6da11660c9149..c48174ed49ccdbd1d4da15e356036d0bc6ca6c9f 100644 (file)
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -850,12 +850,17 @@ static int flexcan_open(struct net_device *dev)
        struct flexcan_priv *priv = netdev_priv(dev);
        int err;
 
-       clk_prepare_enable(priv->clk_ipg);
-       clk_prepare_enable(priv->clk_per);
+       err = clk_prepare_enable(priv->clk_ipg);
+       if (err)
+               return err;
+
+       err = clk_prepare_enable(priv->clk_per);
+       if (err)
+               goto out_disable_ipg;
 
        err = open_candev(dev);
        if (err)
-               goto out;
+               goto out_disable_per;
 
        err = request_irq(dev->irq, flexcan_irq, IRQF_SHARED, dev->name, dev);
        if (err)
@@ -875,8 +880,9 @@ static int flexcan_open(struct net_device *dev)
 
  out_close:
        close_candev(dev);
- out:
+ out_disable_per:
        clk_disable_unprepare(priv->clk_per);
+ out_disable_ipg:
        clk_disable_unprepare(priv->clk_ipg);
 
        return err;
@@ -933,8 +939,13 @@ static int register_flexcandev(struct net_device *dev)
        struct flexcan_regs __iomem *regs = priv->base;
        u32 reg, err;
 
-       clk_prepare_enable(priv->clk_ipg);
-       clk_prepare_enable(priv->clk_per);
+       err = clk_prepare_enable(priv->clk_ipg);
+       if (err)
+               return err;
+
+       err = clk_prepare_enable(priv->clk_per);
+       if (err)
+               goto out_disable_ipg;
 
        /* select "bus clock", chip must be disabled */
        flexcan_chip_disable(priv);
@@ -959,15 +970,16 @@ static int register_flexcandev(struct net_device *dev)
        if (!(reg & FLEXCAN_MCR_FEN)) {
                netdev_err(dev, "Could not enable RX FIFO, unsupported core\n");
                err = -ENODEV;
-               goto out;
+               goto out_disable_per;
        }
 
        err = register_candev(dev);
 
- out:
+ out_disable_per:
        /* disable core and turn off clocks */
        flexcan_chip_disable(priv);
        clk_disable_unprepare(priv->clk_per);
+ out_disable_ipg:
        clk_disable_unprepare(priv->clk_ipg);
 
        return err;