--- /dev/null
+/* tmp401.c
+ *
+ * Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC.
+ *
+ * Note this IC is in some aspect similar to the LM90, but it has quite a
+ * few differences too, for example the local temp has a higher resolution
+ * and thus has 16 bits registers for its value and limit instead of 8 bits.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(tmp401);
+
+
+/*
+ * The TMP401 registers, note some registers have different addresses for
+ * reading and writing
+ */
+#define TMP401_STATUS 0x02
+#define TMP401_CONFIG_READ 0x03
+#define TMP401_CONFIG_WRITE 0x09
+#define TMP401_CONVERSION_RATE_READ 0x04
+#define TMP401_CONVERSION_RATE_WRITE 0x0A
+#define TMP401_TEMP_CRIT_HYST 0x21
+#define TMP401_CONSECUTIVE_ALERT 0x22
+#define TMP401_MANUFACTURER_ID_REG 0xFE
+#define TMP401_DEVICE_ID_REG 0xFF
+
+static const u8 TMP401_TEMP_MSB[2] = { 0x00, 0x01 };
+static const u8 TMP401_TEMP_LSB[2] = { 0x15, 0x10 };
+static const u8 TMP401_TEMP_LOW_LIMIT_MSB_READ[2] = { 0x06, 0x08 };
+static const u8 TMP401_TEMP_LOW_LIMIT_MSB_WRITE[2] = { 0x0C, 0x0E };
+static const u8 TMP401_TEMP_LOW_LIMIT_LSB[2] = { 0x17, 0x14 };
+static const u8 TMP401_TEMP_HIGH_LIMIT_MSB_READ[2] = { 0x05, 0x07 };
+static const u8 TMP401_TEMP_HIGH_LIMIT_MSB_WRITE[2] = { 0x0B, 0x0D };
+static const u8 TMP401_TEMP_HIGH_LIMIT_LSB[2] = { 0x16, 0x13 };
+/* These are called the THERM limit / hysteresis / mask in the datasheet */
+static const u8 TMP401_TEMP_CRIT_LIMIT[2] = { 0x20, 0x19 };
+
+/* Flags */
+#define TMP401_CONFIG_RANGE 0x04
+#define TMP401_CONFIG_SHUTDOWN 0x40
+#define TMP401_STATUS_LOCAL_CRIT 0x01
+#define TMP401_STATUS_REMOTE_CRIT 0x02
+#define TMP401_STATUS_REMOTE_OPEN 0x04
+#define TMP401_STATUS_REMOTE_LOW 0x08
+#define TMP401_STATUS_REMOTE_HIGH 0x10
+#define TMP401_STATUS_LOCAL_LOW 0x20
+#define TMP401_STATUS_LOCAL_HIGH 0x40
+
+/* Manufacturer / Device ID's */
+#define TMP401_MANUFACTURER_ID 0x55
+#define TMP401_DEVICE_ID 0x11
+
+/*
+ * Functions declarations
+ */
+
+static int tmp401_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int tmp401_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info);
+static int tmp401_remove(struct i2c_client *client);
+static struct tmp401_data *tmp401_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static const struct i2c_device_id tmp401_id[] = {
+ { "tmp401", tmp401 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tmp401_id);
+
+static struct i2c_driver tmp401_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "tmp401",
+ },
+ .probe = tmp401_probe,
+ .remove = tmp401_remove,
+ .id_table = tmp401_id,
+ .detect = tmp401_detect,
+ .address_data = &addr_data,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct tmp401_data {
+ struct device *hwmon_dev;
+ struct mutex update_lock;
+ char valid; /* zero until following fields are valid */
+ unsigned long last_updated; /* in jiffies */
+
+ /* register values */
+ u8 status;
+ u8 config;
+ u16 temp[2];
+ u16 temp_low[2];
+ u16 temp_high[2];
+ u8 temp_crit[2];
+ u8 temp_crit_hyst;
+};
+
+/*
+ * Sysfs attr show / store functions
+ */
+
+static int tmp401_register_to_temp(u16 reg, u8 config)
+{
+ int temp = reg;
+
+ if (config & TMP401_CONFIG_RANGE)
+ temp -= 64 * 256;
+
+ return (temp * 625 + 80) / 160;
+}
+
+static u16 tmp401_temp_to_register(long temp, u8 config)
+{
+ if (config & TMP401_CONFIG_RANGE) {
+ temp = SENSORS_LIMIT(temp, -64000, 191000);
+ temp += 64000;
+ } else
+ temp = SENSORS_LIMIT(temp, 0, 127000);
+
+ return (temp * 160 + 312) / 625;
+}
+
+static int tmp401_crit_register_to_temp(u8 reg, u8 config)
+{
+ int temp = reg;
+
+ if (config & TMP401_CONFIG_RANGE)
+ temp -= 64;
+
+ return temp * 1000;
+}
+
+static u8 tmp401_crit_temp_to_register(long temp, u8 config)
+{
+ if (config & TMP401_CONFIG_RANGE) {
+ temp = SENSORS_LIMIT(temp, -64000, 191000);
+ temp += 64000;
+ } else
+ temp = SENSORS_LIMIT(temp, 0, 127000);
+
+ return (temp + 500) / 1000;
+}
+
+static ssize_t show_temp_value(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ tmp401_register_to_temp(data->temp[index], data->config));
+}
+
+static ssize_t show_temp_min(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ tmp401_register_to_temp(data->temp_low[index], data->config));
+}
+
+static ssize_t show_temp_max(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ tmp401_register_to_temp(data->temp_high[index], data->config));
+}
+
+static ssize_t show_temp_crit(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+
+ return sprintf(buf, "%d\n",
+ tmp401_crit_register_to_temp(data->temp_crit[index],
+ data->config));
+}
+
+static ssize_t show_temp_crit_hyst(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int temp, index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+
+ mutex_lock(&data->update_lock);
+ temp = tmp401_crit_register_to_temp(data->temp_crit[index],
+ data->config);
+ temp -= data->temp_crit_hyst * 1000;
+ mutex_unlock(&data->update_lock);
+
+ return sprintf(buf, "%d\n", temp);
+}
+
+static ssize_t show_status(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int mask = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+
+ if (data->status & mask)
+ return sprintf(buf, "1\n");
+ else
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t store_temp_min(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+ long val;
+ u16 reg;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+
+ reg = tmp401_temp_to_register(val, data->config);
+
+ mutex_lock(&data->update_lock);
+
+ i2c_smbus_write_byte_data(to_i2c_client(dev),
+ TMP401_TEMP_LOW_LIMIT_MSB_WRITE[index], reg >> 8);
+ i2c_smbus_write_byte_data(to_i2c_client(dev),
+ TMP401_TEMP_LOW_LIMIT_LSB[index], reg & 0xFF);
+
+ data->temp_low[index] = reg;
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t store_temp_max(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+ long val;
+ u16 reg;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+
+ reg = tmp401_temp_to_register(val, data->config);
+
+ mutex_lock(&data->update_lock);
+
+ i2c_smbus_write_byte_data(to_i2c_client(dev),
+ TMP401_TEMP_HIGH_LIMIT_MSB_WRITE[index], reg >> 8);
+ i2c_smbus_write_byte_data(to_i2c_client(dev),
+ TMP401_TEMP_HIGH_LIMIT_LSB[index], reg & 0xFF);
+
+ data->temp_high[index] = reg;
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t store_temp_crit(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+ long val;
+ u8 reg;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+
+ reg = tmp401_crit_temp_to_register(val, data->config);
+
+ mutex_lock(&data->update_lock);
+
+ i2c_smbus_write_byte_data(to_i2c_client(dev),
+ TMP401_TEMP_CRIT_LIMIT[index], reg);
+
+ data->temp_crit[index] = reg;
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute
+ *devattr, const char *buf, size_t count)
+{
+ int temp, index = to_sensor_dev_attr(devattr)->index;
+ struct tmp401_data *data = tmp401_update_device(dev);
+ long val;
+ u8 reg;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+
+ if (data->config & TMP401_CONFIG_RANGE)
+ val = SENSORS_LIMIT(val, -64000, 191000);
+ else
+ val = SENSORS_LIMIT(val, 0, 127000);
+
+ mutex_lock(&data->update_lock);
+ temp = tmp401_crit_register_to_temp(data->temp_crit[index],
+ data->config);
+ val = SENSORS_LIMIT(val, temp - 255000, temp);
+ reg = ((temp - val) + 500) / 1000;
+
+ i2c_smbus_write_byte_data(to_i2c_client(dev),
+ TMP401_TEMP_CRIT_HYST, reg);
+
+ data->temp_crit_hyst = reg;
+
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static struct sensor_device_attribute tmp401_attr[] = {
+ SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
+ SENSOR_ATTR(temp1_min, 0644, show_temp_min, store_temp_min, 0),
+ SENSOR_ATTR(temp1_max, 0644, show_temp_max, store_temp_max, 0),
+ SENSOR_ATTR(temp1_crit, 0644, show_temp_crit, store_temp_crit, 0),
+ SENSOR_ATTR(temp1_crit_hyst, 0644, show_temp_crit_hyst,
+ store_temp_crit_hyst, 0),
+ SENSOR_ATTR(temp1_min_alarm, 0444, show_status, NULL,
+ TMP401_STATUS_LOCAL_LOW),
+ SENSOR_ATTR(temp1_max_alarm, 0444, show_status, NULL,
+ TMP401_STATUS_LOCAL_HIGH),
+ SENSOR_ATTR(temp1_crit_alarm, 0444, show_status, NULL,
+ TMP401_STATUS_LOCAL_CRIT),
+ SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
+ SENSOR_ATTR(temp2_min, 0644, show_temp_min, store_temp_min, 1),
+ SENSOR_ATTR(temp2_max, 0644, show_temp_max, store_temp_max, 1),
+ SENSOR_ATTR(temp2_crit, 0644, show_temp_crit, store_temp_crit, 1),
+ SENSOR_ATTR(temp2_crit_hyst, 0444, show_temp_crit_hyst, NULL, 1),
+ SENSOR_ATTR(temp2_fault, 0444, show_status, NULL,
+ TMP401_STATUS_REMOTE_OPEN),
+ SENSOR_ATTR(temp2_min_alarm, 0444, show_status, NULL,
+ TMP401_STATUS_REMOTE_LOW),
+ SENSOR_ATTR(temp2_max_alarm, 0444, show_status, NULL,
+ TMP401_STATUS_REMOTE_HIGH),
+ SENSOR_ATTR(temp2_crit_alarm, 0444, show_status, NULL,
+ TMP401_STATUS_REMOTE_CRIT),
+};
+
+/*
+ * Begin non sysfs callback code (aka Real code)
+ */
+
+static void tmp401_init_client(struct i2c_client *client)
+{
+ int config, config_orig;
+
+ /* Set the conversion rate to 2 Hz */
+ i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
+
+ /* Start conversions (disable shutdown if necessary) */
+ config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
+ if (config < 0) {
+ dev_warn(&client->dev, "Initialization failed!\n");
+ return;
+ }
+
+ config_orig = config;
+ config &= ~TMP401_CONFIG_SHUTDOWN;
+
+ if (config != config_orig)
+ i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
+}
+
+static int tmp401_detect(struct i2c_client *client, int kind,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ /* Detect and identify the chip */
+ if (kind <= 0) {
+ u8 reg;
+
+ reg = i2c_smbus_read_byte_data(client,
+ TMP401_MANUFACTURER_ID_REG);
+ if (reg != TMP401_MANUFACTURER_ID)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
+ if (reg != TMP401_DEVICE_ID)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
+ if (reg & 0x1b)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client,
+ TMP401_CONVERSION_RATE_READ);
+ if (reg > 15)
+ return -ENODEV;
+ }
+ strlcpy(info->type, "tmp401", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int tmp401_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int i, err = 0;
+ struct tmp401_data *data;
+
+ data = kzalloc(sizeof(struct tmp401_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, data);
+ mutex_init(&data->update_lock);
+
+ /* Initialize the TMP401 chip */
+ tmp401_init_client(client);
+
+ /* Register sysfs hooks */
+ for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++) {
+ err = device_create_file(&client->dev,
+ &tmp401_attr[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
+
+ data->hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ data->hwmon_dev = NULL;
+ goto exit_remove;
+ }
+
+ dev_info(&client->dev, "Detected TI TMP401 chip\n");
+
+ return 0;
+
+exit_remove:
+ tmp401_remove(client); /* will also free data for us */
+ return err;
+}
+
+static int tmp401_remove(struct i2c_client *client)
+{
+ struct tmp401_data *data = i2c_get_clientdata(client);
+ int i;
+
+ if (data->hwmon_dev)
+ hwmon_device_unregister(data->hwmon_dev);
+
+ for (i = 0; i < ARRAY_SIZE(tmp401_attr); i++)
+ device_remove_file(&client->dev, &tmp401_attr[i].dev_attr);
+
+ kfree(data);
+ return 0;
+}
+
+static struct tmp401_data *tmp401_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct tmp401_data *data = i2c_get_clientdata(client);
+ int i;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+ data->status = i2c_smbus_read_byte_data(client, TMP401_STATUS);
+ data->config = i2c_smbus_read_byte_data(client,
+ TMP401_CONFIG_READ);
+ for (i = 0; i < 2; i++) {
+ /* High byte must be read first immediately followed
+ by the low byte */
+ data->temp[i] = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_MSB[i]) << 8;
+ data->temp[i] |= i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_LSB[i]);
+ data->temp_low[i] = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_LOW_LIMIT_MSB_READ[i]) << 8;
+ data->temp_low[i] |= i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_LOW_LIMIT_LSB[i]);
+ data->temp_high[i] = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_HIGH_LIMIT_MSB_READ[i]) << 8;
+ data->temp_high[i] |= i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_HIGH_LIMIT_LSB[i]);
+ data->temp_crit[i] = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_CRIT_LIMIT[i]);
+ }
+
+ data->temp_crit_hyst = i2c_smbus_read_byte_data(client,
+ TMP401_TEMP_CRIT_HYST);
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+static int __init tmp401_init(void)
+{
+ return i2c_add_driver(&tmp401_driver);
+}
+
+static void __exit tmp401_exit(void)
+{
+ i2c_del_driver(&tmp401_driver);
+}
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(tmp401_init);
+module_exit(tmp401_exit);
projects / deliverable / linux.git / commitdiff
