config FSL_SOC
bool
select HAVE_CAN_FLEXCAN if NET && CAN
- select PPC_CLOCK if CAN_FLEXCAN
+ select PPC_CLOCK
config FSL_PCI
bool
image-$(CONFIG_TQM8555) += cuImage.tqm8555
image-$(CONFIG_TQM8560) += cuImage.tqm8560
image-$(CONFIG_SBC8548) += cuImage.sbc8548
-image-$(CONFIG_SBC8560) += cuImage.sbc8560
image-$(CONFIG_KSI8560) += cuImage.ksi8560
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
--- /dev/null
+/*
+ * BSC9131 RDB Device Tree Source
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/bsc9131si-pre.dtsi"
+
+/ {
+ model = "fsl,bsc9131rdb";
+ compatible = "fsl,bsc9131rdb";
+
+ memory {
+ device_type = "memory";
+ };
+
+ board_ifc: ifc: ifc@ff71e000 {
+ /* NAND Flash on board */
+ ranges = <0x0 0x0 0x0 0xff800000 0x00004000>;
+ reg = <0x0 0xff71e000 0x0 0x2000>;
+ };
+
+ board_soc: soc: soc@ff700000 {
+ ranges = <0x0 0x0 0xff700000 0x100000>;
+ };
+};
+
+/include/ "bsc9131rdb.dtsi"
+/include/ "fsl/bsc9131si-post.dtsi"
--- /dev/null
+/*
+ * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_ifc {
+
+ nand@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc-nand";
+ reg = <0x0 0x0 0x4000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 3MB for u-boot Bootloader Image */
+ reg = <0x0 0x00300000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@300000 {
+ /* 1MB for DTB Image */
+ reg = <0x00300000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@400000 {
+ /* 8MB for Linux Kernel Image */
+ reg = <0x00400000 0x00800000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@c00000 {
+ /* Rest space for Root file System Image */
+ reg = <0x00c00000 0x07400000>;
+ label = "NAND RFS Image";
+ };
+ };
+};
+
+&board_soc {
+ /* BSC9131RDB does not have any device on i2c@3100 */
+ i2c@3100 {
+ status = "disabled";
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ /* 512KB for u-boot Bootloader Image */
+ partition@0 {
+ reg = <0x0 0x00080000>;
+ label = "SPI Flash U-Boot Image";
+ read-only;
+ };
+
+ /* 512KB for DTB Image */
+ partition@80000 {
+ reg = <0x00080000 0x00080000>;
+ label = "SPI Flash DTB Image";
+ };
+
+ /* 4MB for Linux Kernel Image */
+ partition@100000 {
+ reg = <0x00100000 0x00400000>;
+ label = "SPI Flash Kernel Image";
+ };
+
+ /*11MB for RFS Image */
+ partition@500000 {
+ reg = <0x00500000 0x00B00000>;
+ label = "SPI Flash RFS Image";
+ };
+
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x3>;
+ };
+ };
+
+ sdhci@2e000 {
+ status = "disabled";
+ };
+
+ enet0: ethernet@b0000 {
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
--- /dev/null
+/*
+ * BSC9131 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,bsc9131-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,bsc9131-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,bsc9131-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+ i2c@3000 {
+ interrupts = <17 2 0 0>;
+ };
+
+/include/ "pq3-i2c-1.dtsi"
+ i2c@3100 {
+ interrupts = <17 2 0 0>;
+ };
+
+/include/ "pq3-duart-0.dtsi"
+ serial0: serial@4500 {
+ interrupts = <18 2 0 0>;
+ };
+
+ serial1: serial@4600 {
+ interrupts = <18 2 0 0 >;
+ };
+/include/ "pq3-espi-0.dtsi"
+ spi0: spi@7000 {
+ fsl,espi-num-chipselects = <1>;
+ interrupts = <22 0x2 0 0>;
+ };
+
+/include/ "pq3-gpio-0.dtsi"
+ gpio-controller@f000 {
+ interrupts = <19 0x2 0 0>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,bsc9131-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+ dma-channel@0 {
+ interrupts = <62 2 0 0>;
+ };
+
+ dma-channel@80 {
+ interrupts = <63 2 0 0>;
+ };
+
+ dma-channel@100 {
+ interrupts = <64 2 0 0>;
+ };
+
+ dma-channel@180 {
+ interrupts = <65 2 0 0>;
+ };
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+ compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+ interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+ sdhc@2e000 {
+ fsl,sdhci-auto-cmd12;
+ interrupts = <41 0x2 0 0>;
+ };
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+ interrupts = <57 2 0 0>;
+
+ sec_jr0: jr@1000 {
+ interrupts = <58 2 0 0>;
+ };
+
+ sec_jr1: jr@2000 {
+ interrupts = <59 2 0 0>;
+ };
+
+ sec_jr2: jr@3000 {
+ interrupts = <60 2 0 0>;
+ };
+
+ sec_jr3: jr@4000 {
+ interrupts = <61 2 0 0>;
+ };
+};
+
+/include/ "pq3-mpic.dtsi"
+
+timer@41100 {
+ compatible = "fsl,mpic-v1.2-msgr", "fsl,mpic-msg";
+ reg = <0x41400 0x200>;
+ interrupts = <
+ 0xb0 2
+ 0xb1 2
+ 0xb2 2
+ 0xb3 2>;
+};
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+ queue-group@b0000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+ };
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+ queue-group@b1000 {
+ fsl,rx-bit-map = <0xff>;
+ fsl,tx-bit-map = <0xff>;
+ interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+ };
+};
+
+global-utilities@e0000 {
+ compatible = "fsl,bsc9131-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
--- /dev/null
+/*
+ * BSC9131 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,BSC9131";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,BSC9131@0 {
+ device_type = "cpu";
+ compatible = "fsl,e500v2";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
/*
* P1021/P1012 Silicon/SoC Device Tree Source (post include)
*
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
interrupt-parent = <&qeic>;
};
+ ucc@2600 {
+ cell-index = <7>;
+ reg = <0x2600 0x200>;
+ interrupts = <42>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2200 {
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ };
+
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
+++ /dev/null
-/*
- * P3060 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
- compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
- interrupts = <25 2 0 0>;
- #address-cells = <2>;
- #size-cells = <1>;
-};
-
-/* controller at 0x200000 */
-&pci0 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0x0 0xff>;
- clock-frequency = <33333333>;
- interrupts = <16 2 1 15>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 15>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 40 1 0 0
- 0000 0 0 2 &mpic 1 1 0 0
- 0000 0 0 3 &mpic 2 1 0 0
- 0000 0 0 4 &mpic 3 1 0 0
- >;
- };
-};
-
-/* controller at 0x201000 */
-&pci1 {
- compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
- device_type = "pci";
- #size-cells = <2>;
- #address-cells = <3>;
- bus-range = <0 0xff>;
- clock-frequency = <33333333>;
- interrupts = <16 2 1 14>;
- pcie@0 {
- reg = <0 0 0 0 0>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- interrupts = <16 2 1 14>;
- interrupt-map-mask = <0xf800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0 0 1 &mpic 41 1 0 0
- 0000 0 0 2 &mpic 5 1 0 0
- 0000 0 0 3 &mpic 6 1 0 0
- 0000 0 0 4 &mpic 7 1 0 0
- >;
- };
-};
-
-&rio {
- compatible = "fsl,srio";
- interrupts = <16 2 1 11>;
- #address-cells = <2>;
- #size-cells = <2>;
- fsl,srio-rmu-handle = <&rmu>;
- ranges;
-
- port1 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <1>;
- };
-
- port2 {
- #address-cells = <2>;
- #size-cells = <2>;
- cell-index = <2>;
- };
-};
-
-&dcsr {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,dcsr", "simple-bus";
-
- dcsr-epu@0 {
- compatible = "fsl,dcsr-epu";
- interrupts = <52 2 0 0
- 84 2 0 0
- 85 2 0 0>;
- reg = <0x0 0x1000>;
- };
- dcsr-npc {
- compatible = "fsl,dcsr-npc";
- reg = <0x1000 0x1000 0x1000000 0x8000>;
- };
- dcsr-nxc@2000 {
- compatible = "fsl,dcsr-nxc";
- reg = <0x2000 0x1000>;
- };
- dcsr-corenet {
- compatible = "fsl,dcsr-corenet";
- reg = <0x8000 0x1000 0xB0000 0x1000>;
- };
- dcsr-dpaa@9000 {
- compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
- reg = <0x9000 0x1000>;
- };
- dcsr-ocn@11000 {
- compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
- reg = <0x11000 0x1000>;
- };
- dcsr-ddr@12000 {
- compatible = "fsl,dcsr-ddr";
- dev-handle = <&ddr1>;
- reg = <0x12000 0x1000>;
- };
- dcsr-nal@18000 {
- compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
- reg = <0x18000 0x1000>;
- };
- dcsr-rcpm@22000 {
- compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
- reg = <0x22000 0x1000>;
- };
- dcsr-cpu-sb-proxy@40000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu0>;
- reg = <0x40000 0x1000>;
- };
- dcsr-cpu-sb-proxy@41000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu1>;
- reg = <0x41000 0x1000>;
- };
- dcsr-cpu-sb-proxy@44000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu4>;
- reg = <0x44000 0x1000>;
- };
- dcsr-cpu-sb-proxy@45000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu5>;
- reg = <0x45000 0x1000>;
- };
- dcsr-cpu-sb-proxy@46000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu6>;
- reg = <0x46000 0x1000>;
- };
- dcsr-cpu-sb-proxy@47000 {
- compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
- cpu-handle = <&cpu7>;
- reg = <0x47000 0x1000>;
- };
-
-};
-
-&soc {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
-
- soc-sram-error {
- compatible = "fsl,soc-sram-error";
- interrupts = <16 2 1 29>;
- };
-
- corenet-law@0 {
- compatible = "fsl,corenet-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <32>;
- };
-
- ddr1: memory-controller@8000 {
- compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
- reg = <0x8000 0x1000>;
- interrupts = <16 2 1 23>;
- };
-
- cpc: l3-cache-controller@10000 {
- compatible = "fsl,p3060-l3-cache-controller", "cache";
- reg = <0x10000 0x1000
- 0x11000 0x1000>;
- interrupts = <16 2 1 27
- 16 2 1 26>;
- };
-
- corenet-cf@18000 {
- compatible = "fsl,corenet-cf";
- reg = <0x18000 0x1000>;
- interrupts = <16 2 1 31>;
- fsl,ccf-num-csdids = <32>;
- fsl,ccf-num-snoopids = <32>;
- };
-
- iommu@20000 {
- compatible = "fsl,pamu-v1.0", "fsl,pamu";
- reg = <0x20000 0x5000>;
- interrupts = <
- 24 2 0 0
- 16 2 1 30>;
- };
-
-/include/ "qoriq-rmu-0.dtsi"
-/include/ "qoriq-mpic.dtsi"
-
- guts: global-utilities@e0000 {
- compatible = "fsl,qoriq-device-config-1.0";
- reg = <0xe0000 0xe00>;
- fsl,has-rstcr;
- #sleep-cells = <1>;
- fsl,liodn-bits = <12>;
- };
-
- pins: global-utilities@e0e00 {
- compatible = "fsl,qoriq-pin-control-1.0";
- reg = <0xe0e00 0x200>;
- #sleep-cells = <2>;
- };
-
- clockgen: global-utilities@e1000 {
- compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
- reg = <0xe1000 0x1000>;
- clock-frequency = <0>;
- };
-
- rcpm: global-utilities@e2000 {
- compatible = "fsl,qoriq-rcpm-1.0";
- reg = <0xe2000 0x1000>;
- #sleep-cells = <1>;
- };
-
- sfp: sfp@e8000 {
- compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
- reg = <0xe8000 0x1000>;
- };
-
- serdes: serdes@ea000 {
- compatible = "fsl,p3060-serdes";
- reg = <0xea000 0x1000>;
- };
-
-/include/ "qoriq-dma-0.dtsi"
-/include/ "qoriq-dma-1.dtsi"
-/include/ "qoriq-espi-0.dtsi"
- spi@110000 {
- fsl,espi-num-chipselects = <4>;
- };
-
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-usb2-mph-0.dtsi"
- usb@210000 {
- compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
- };
-/include/ "qoriq-usb2-dr-0.dtsi"
- usb@211000 {
- compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
- };
-/include/ "qoriq-sec4.1-0.dtsi"
-};
+++ /dev/null
-/*
- * P3060 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P3060";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases {
- ccsr = &soc;
- dcsr = &dcsr;
-
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
- serial3 = &serial3;
- pci0 = &pci0;
- pci1 = &pci1;
- usb0 = &usb0;
- usb1 = &usb1;
- dma0 = &dma0;
- dma1 = &dma1;
- msi0 = &msi0;
- msi1 = &msi1;
- msi2 = &msi2;
-
- crypto = &crypto;
- sec_jr0 = &sec_jr0;
- sec_jr1 = &sec_jr1;
- sec_jr2 = &sec_jr2;
- sec_jr3 = &sec_jr3;
- rtic_a = &rtic_a;
- rtic_b = &rtic_b;
- rtic_c = &rtic_c;
- rtic_d = &rtic_d;
- sec_mon = &sec_mon;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu4: PowerPC,e500mc@4 {
- device_type = "cpu";
- reg = <4>;
- next-level-cache = <&L2_4>;
- L2_4: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu5: PowerPC,e500mc@5 {
- device_type = "cpu";
- reg = <5>;
- next-level-cache = <&L2_5>;
- L2_5: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu6: PowerPC,e500mc@6 {
- device_type = "cpu";
- reg = <6>;
- next-level-cache = <&L2_6>;
- L2_6: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- cpu7: PowerPC,e500mc@7 {
- device_type = "cpu";
- reg = <7>;
- next-level-cache = <&L2_7>;
- L2_7: l2-cache {
- next-level-cache = <&cpc>;
- };
- };
- };
-};
interrupt-parent = <&PIC>;
usb-clock = <5>;
};
+ spi@11aa0 {
+ cell-index = <0>;
+ compatible = "fsl,spi", "fsl,cpm2-spi";
+ reg = <0x11a80 0x40 0x89fc 0x2>;
+ interrupts = <2 8>;
+ interrupt-parent = <&PIC>;
+ gpios = < &cpm2_pio_d 19 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ds3106@1 {
+ compatible = "gen,spidev";
+ reg = <0>;
+ spi-max-frequency = <8000000>;
+ };
+ };
+
+ };
+
+ cpm2_pio_d: gpio-controller@10d60 {
+ #gpio-cells = <2>;
+ compatible = "fsl,cpm2-pario-bank";
+ reg = <0x10d60 0x14>;
+ gpio-controller;
};
cpm2_pio_c: gpio-controller@10d40 {
reg = <1>;
device_type = "ethernet-phy";
};
+ sgmii_phy0: sgmii-phy@0 {
+ interrupts = <6 1 0 0>;
+ reg = <0x1d>;
+ };
+ sgmii_phy1: sgmii-phy@1 {
+ interrupts = <6 1 0 0>;
+ reg = <0x1c>;
+ };
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
device_type = "ethernet-phy";
};
+ sgmii_phy0: sgmii-phy@0 {
+ interrupts = <6 1 0 0>;
+ reg = <0x1c>;
+ };
+ sgmii_phy1: sgmii-phy@1 {
+ interrupts = <6 1 0 0>;
+ reg = <0x1d>;
+ };
+
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
reg = <0x3>;
};
+ sgmii_phy0: sgmii-phy@0 {
+ interrupts = <6 1 0 0>;
+ reg = <0x1c>;
+ };
+ sgmii_phy1: sgmii-phy@1 {
+ interrupts = <6 1 0 0>;
+ reg = <0x1d>;
+ };
+ sgmii_phy2: sgmii-phy@2 {
+ interrupts = <7 1 0 0>;
+ reg = <0x1e>;
+ };
+ sgmii_phy3: sgmii-phy@3 {
+ interrupts = <7 1 0 0>;
+ reg = <0x1f>;
+ };
+
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
msi@41600 {
msi-available-ranges = <0 0x80>;
interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0>;
+ 0xe0 0 0 0
+ 0xe1 0 0 0
+ 0xe2 0 0 0
+ 0xe3 0 0 0>;
};
timer@42100 {
status = "disabled";
ethernet@24000 {
status = "disabled";
};
- mdio@24520 {
- status = "disabled";
- };
ptp_clock@24e00 {
status = "disabled";
};
msi@41600 {
msi-available-ranges = <0x80 0x80>;
interrupts = <
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
+ 0xe4 0 0 0
+ 0xe5 0 0 0
+ 0xe6 0 0 0
+ 0xe7 0 0 0>;
};
global-utilities@e0000 {
status = "disabled";
&board_soc {
i2c@3000 {
+ eeprom@50 {
+ compatible = "st,24c256";
+ reg = <0x50>;
+ };
+
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
};
+ i2c@3100 {
+ eeprom@52 {
+ compatible = "atmel,24c01";
+ reg = <0x52>;
+ };
+ };
+
spi@7000 {
flash@0 {
#address-cells = <1>;
--- /dev/null
+/*
+ * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1021-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for User Writable Area */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND Writable User area";
+ };
+ };
+
+ L2switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+};
+
+&soc {
+ i2c@3000 {
+ rtc@68 {
+ compatible = "pericom,pt7c4338";
+ reg = <0x68>;
+ };
+ };
+
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl12801";
+ reg = <0>;
+ spi-max-frequency = <40000000>; /* input clock */
+
+ partition@u-boot {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI Flash U-Boot Image";
+ read-only;
+ };
+
+ partition@dtb {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI Flash DTB Image";
+ };
+
+ partition@kernel {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI Flash Linux Kernel Image";
+ };
+
+ partition@fs {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI Flash Compressed RFSImage";
+ };
+
+ partition@jffs-fs {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI Flash JFFS2 RFS";
+ };
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1 0 0>;
+ reg = <0x1>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet@b0000 {
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ enet1: ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi1>;
+ phy-connection-type = "sgmii";
+ };
+
+ enet2: ethernet@b2000 {
+ phy-handle = <&phy1>;
+ tbi-handle = <&tbi2>;
+ phy-connection-type = "rgmii-id";
+ };
+};
--- /dev/null
+/*
+ * P1021 RDB Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+ model = "fsl,P1021RDB";
+ compatible = "fsl,P1021RDB-PC";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
+
+ /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xff800000 0x00040000
+ 0x2 0x0 0x0 0xffb00000 0x00020000>;
+ };
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@ffe09000 {
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+ reg = <0 0xffe09000 0 0x1000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ qe: qe@ffe80000 {
+ ranges = <0x0 0x0 0xffe80000 0x40000>;
+ reg = <0 0xffe80000 0 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+ };
+};
+
+/include/ "p1021rdb-pc.dtsi"
+/include/ "fsl/p1021si-post.dtsi"
--- /dev/null
+/*
+ * P1021 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+ model = "fsl,P1021RDB";
+ compatible = "fsl,P1021RDB-PC";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+
+ /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xff800000 0x00040000
+ 0x2 0x0 0xf 0xffb00000 0x00020000>;
+ };
+
+ soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ reg = <0xf 0xffe09000 0 0x1000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ qe: qe@fffe80000 {
+ ranges = <0x0 0xf 0xffe80000 0x40000>;
+ reg = <0xf 0xffe80000 0 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+ };
+};
+
+/include/ "p1021rdb-pc.dtsi"
+/include/ "fsl/p1021si-post.dtsi"
+++ /dev/null
-/*
- * P1021 RDB Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1021si-pre.dtsi"
-/ {
- model = "fsl,P1021RDB";
- compatible = "fsl,P1021RDB-PC";
-
- memory {
- device_type = "memory";
- };
-
- lbc: localbus@ffe05000 {
- reg = <0 0xffe05000 0 0x1000>;
-
- /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
- ranges = <0x0 0x0 0x0 0xef000000 0x01000000
- 0x1 0x0 0x0 0xff800000 0x00040000
- 0x2 0x0 0x0 0xffb00000 0x00020000>;
- };
-
- soc: soc@ffe00000 {
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- };
-
- pci0: pcie@ffe09000 {
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- reg = <0 0xffe09000 0 0x1000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@ffe0a000 {
- reg = <0 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- qe: qe@ffe80000 {
- ranges = <0x0 0x0 0xffe80000 0x40000>;
- reg = <0 0xffe80000 0 0x480>;
- brg-frequency = <0>;
- bus-frequency = <0>;
- };
-};
-
-/include/ "p1021rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
+++ /dev/null
-/*
- * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x1000000>;
- bank-width = <2>;
- device-width = <1>;
-
- partition@0 {
- /* This location must not be altered */
- /* 256KB for Vitesse 7385 Switch firmware */
- reg = <0x0 0x00040000>;
- label = "NOR Vitesse-7385 Firmware";
- read-only;
- };
-
- partition@40000 {
- /* 256KB for DTB Image */
- reg = <0x00040000 0x00040000>;
- label = "NOR DTB Image";
- };
-
- partition@80000 {
- /* 3.5 MB for Linux Kernel Image */
- reg = <0x00080000 0x00380000>;
- label = "NOR Linux Kernel Image";
- };
-
- partition@400000 {
- /* 11MB for JFFS2 based Root file System */
- reg = <0x00400000 0x00b00000>;
- label = "NOR JFFS2 Root File System";
- };
-
- partition@f00000 {
- /* This location must not be altered */
- /* 512KB for u-boot Bootloader Image */
- /* 512KB for u-boot Environment Variables */
- reg = <0x00f00000 0x00100000>;
- label = "NOR U-Boot Image";
- };
- };
-
- nand@1,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p1021-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x1 0x0 0x40000>;
-
- partition@0 {
- /* This location must not be altered */
- /* 1MB for u-boot Bootloader Image */
- reg = <0x0 0x00100000>;
- label = "NAND U-Boot Image";
- read-only;
- };
-
- partition@100000 {
- /* 1MB for DTB Image */
- reg = <0x00100000 0x00100000>;
- label = "NAND DTB Image";
- };
-
- partition@200000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00200000 0x00400000>;
- label = "NAND Linux Kernel Image";
- };
-
- partition@600000 {
- /* 4MB for Compressed Root file System Image */
- reg = <0x00600000 0x00400000>;
- label = "NAND Compressed RFS Image";
- };
-
- partition@a00000 {
- /* 7MB for JFFS2 based Root file System */
- reg = <0x00a00000 0x00700000>;
- label = "NAND JFFS2 Root File System";
- };
-
- partition@1100000 {
- /* 15MB for User Writable Area */
- reg = <0x01100000 0x00f00000>;
- label = "NAND Writable User area";
- };
- };
-
- L2switch@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "vitesse-7385";
- reg = <0x2 0x0 0x20000>;
- };
-};
-
-&soc {
- i2c@3000 {
- rtc@68 {
- compatible = "pericom,pt7c4338";
- reg = <0x68>;
- };
- };
-
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
-
- partition@u-boot {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "SPI Flash U-Boot Image";
- read-only;
- };
-
- partition@dtb {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "SPI Flash DTB Image";
- };
-
- partition@kernel {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "SPI Flash Linux Kernel Image";
- };
-
- partition@fs {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "SPI Flash Compressed RFSImage";
- };
-
- partition@jffs-fs {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "SPI Flash JFFS2 RFS";
- };
- };
- };
-
- usb@22000 {
- phy_type = "ulpi";
- };
-
- mdio@24000 {
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1 0 0>;
- reg = <0x0>;
- };
-
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <2 1 0 0>;
- reg = <0x1>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@25000 {
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26000 {
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- enet0: ethernet@b0000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
- enet1: ethernet@b1000 {
- phy-handle = <&phy0>;
- tbi-handle = <&tbi1>;
- phy-connection-type = "sgmii";
- };
-
- enet2: ethernet@b2000 {
- phy-handle = <&phy1>;
- tbi-handle = <&tbi2>;
- phy-connection-type = "rgmii-id";
- };
-};
+++ /dev/null
-/*
- * P1021 RDB Device Tree Source (36-bit address map)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1021si-pre.dtsi"
-/ {
- model = "fsl,P1021RDB";
- compatible = "fsl,P1021RDB-PC";
-
- memory {
- device_type = "memory";
- };
-
- lbc: localbus@fffe05000 {
- reg = <0xf 0xffe05000 0 0x1000>;
-
- /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
- ranges = <0x0 0x0 0xf 0xef000000 0x01000000
- 0x1 0x0 0xf 0xff800000 0x00040000
- 0x2 0x0 0xf 0xffb00000 0x00020000>;
- };
-
- soc: soc@fffe00000 {
- ranges = <0x0 0xf 0xffe00000 0x100000>;
- };
-
- pci0: pcie@fffe09000 {
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
- reg = <0xf 0xffe09000 0 0x1000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- pci1: pcie@fffe0a000 {
- reg = <0xf 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
- pcie@0 {
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
- qe: qe@fffe80000 {
- ranges = <0x0 0xf 0xffe80000 0x40000>;
- reg = <0xf 0xffe80000 0 0x480>;
- brg-frequency = <0>;
- bus-frequency = <0>;
- };
-};
-
-/include/ "p1021rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
*/
&board_lbc {
- /*
- * This node is used to access the pixis via "indirect" mode,
- * which is done by writing the pixis register index to chip
- * select 0 and the value to/from chip select 1. Indirect
- * mode is the only way to access the pixis when DIU video
- * is enabled. Note that this assumes that the first column
- * of the 'ranges' property above is the chip select number.
- */
- board-control@0,0 {
- compatible = "fsl,p1022ds-indirect-pixis";
- reg = <0x0 0x0 1 /* CS0 */
- 0x1 0x0 1>; /* CS1 */
- interrupt-parent = <&mpic>;
- interrupts = <8 0 0 0>;
- };
-
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
* the clock is enabled.
*/
};
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
};
spi@7000 {
--- /dev/null
+/*
+ * P1024 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR DTB Image";
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR Linux Kernel Image";
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND DTB Image";
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND Linux Kernel Image";
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND Compressed RFS Image";
+ };
+
+ partition@a00000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00f00000>;
+ label = "NAND JFFS2 Root File System";
+ };
+
+ partition@1900000 {
+ /* 7MB for User Writable Area */
+ reg = <0x01900000 0x00700000>;
+ label = "NAND Writable User area";
+ };
+ };
+};
+
+&soc {
+ spi@7000 {
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,m25p80";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partition@0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI U-Boot Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI DTB Image";
+ };
+
+ partition@100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI Linux Kernel Image";
+ };
+
+ partition@500000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI Compressed RFS Image";
+ };
+
+ partition@900000 {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI JFFS2 RFS";
+ };
+ };
+ };
+
+ i2c@3000 {
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ usb@22000 {
+ phy_type = "ulpi";
+ };
+
+ usb@23000 {
+ status = "disabled";
+ };
+
+ mdio@24000 {
+ phy0: ethernet-phy@0 {
+ interrupts = <3 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <2 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <1 1 0 0>;
+ reg = <0x2>;
+ };
+ };
+
+ mdio@25000 {
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26000 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ ethernet@b0000 {
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ ethernet@b1000 {
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@b2000 {
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
--- /dev/null
+/*
+ * P1024 RDB 32Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1024RDB";
+ compatible = "fsl,P1024RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@ffe05000 {
+ reg = <0x0 0xffe05000 0 0x1000>;
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xff800000 0x00040000>;
+ };
+
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@ffe09000 {
+ reg = <0x0 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ reg = <0x0 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1024rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
--- /dev/null
+/*
+ * P1024 RDB 36Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+ model = "fsl,P1024RDB";
+ compatible = "fsl,P1024RDB";
+
+ memory {
+ device_type = "memory";
+ };
+
+ lbc: localbus@fffe05000 {
+ reg = <0xf 0xffe05000 0 0x1000>;
+ ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+ 0x1 0x0 0xf 0xff800000 0x00040000>;
+ };
+
+ soc: soc@fffe00000 {
+ ranges = <0x0 0xf 0xffe00000 0x100000>;
+ };
+
+ pci0: pcie@fffe09000 {
+ reg = <0xf 0xffe09000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+ pcie@0 {
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@fffe0a000 {
+ reg = <0xf 0xffe0a000 0 0x1000>;
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ ranges = <0x2000000 0x0 0xe0000000
+ 0x2000000 0x0 0xe0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
+
+/include/ "p1024rdb.dtsi"
+/include/ "fsl/p1020si-post.dtsi"
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
};
+
+ pio3: ucc_pin@03 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/
+ 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/
+ 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/
+ 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/
+ 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/
+ };
+
+ pio4: ucc_pin@04 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/
+ 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/
+ 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/
+ 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/
+ 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/
+ };
+ };
+};
+
+&qe {
+ serial2: ucc@2600 {
+ device_type = "serial";
+ compatible = "ucc_uart";
+ port-number = <0>;
+ rx-clock-name = "brg6";
+ tx-clock-name = "brg6";
+ pio-handle = <&pio3>;
+ };
+
+ serial3: ucc@2200 {
+ device_type = "serial";
+ compatible = "ucc_uart";
+ port-number = <1>;
+ rx-clock-name = "brg2";
+ tx-clock-name = "brg2";
+ pio-handle = <&pio4>;
};
};
interrupts = <3 1 0 0>;
reg = <0x2>;
};
+
+ sgmii_phy1: sgmii-phy@1 {
+ interrupts = <5 1 0 0>;
+ reg = <0x1c>;
+ };
+ sgmii_phy2: sgmii-phy@2 {
+ interrupts = <5 1 0 0>;
+ reg = <0x1d>;
+ };
+
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
- 0x1 0x0 0x0 0xff800000 0x00040000
+ 0x1 0x0 0x0 0xffa00000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
nor@0,0 {
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
- ranges = <0 0 0xf 0xe8000000 0x08000000>;
+ ranges = <0 0 0xf 0xe8000000 0x08000000
+ 1 0 0xf 0xffa00000 0x00040000>;
flash@0,0 {
compatible = "cfi-flash";
bank-width = <2>;
device-width = <2>;
};
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ label = "NAND U-Boot Image";
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ partition@2000000 {
+ label = "NAND Root File System";
+ reg = <0x02000000 0x10000000>;
+ };
+
+ partition@12000000 {
+ label = "NAND Compressed RFS Image";
+ reg = <0x12000000 0x08000000>;
+ };
+
+ partition@1a000000 {
+ label = "NAND Linux Kernel Image";
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ partition@1e000000 {
+ label = "NAND DTB Image";
+ reg = <0x1e000000 0x01000000>;
+ };
+
+ partition@1f000000 {
+ label = "NAND Writable User area";
+ reg = <0x1f000000 0x01000000>;
+ };
+ };
};
pci0: pcie@ffe200000 {
+++ /dev/null
-/*
- * P3060QDS Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of Freescale Semiconductor nor the
- * names of its contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p3060si-pre.dtsi"
-
-/ {
- model = "fsl,P3060QDS";
- compatible = "fsl,P3060QDS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- memory {
- device_type = "memory";
- };
-
- dcsr: dcsr@f00000000 {
- ranges = <0x00000000 0xf 0x00000000 0x01008000>;
- };
-
- soc: soc@ffe000000 {
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
- spi@110000 {
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25sl12801";
- reg = <0>;
- spi-max-frequency = <40000000>; /* input clock */
- partition@u-boot {
- label = "u-boot";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition@kernel {
- label = "kernel";
- reg = <0x00100000 0x00500000>;
- read-only;
- };
- partition@dtb {
- label = "dtb";
- reg = <0x00600000 0x00100000>;
- read-only;
- };
- partition@fs {
- label = "file system";
- reg = <0x00700000 0x00900000>;
- };
- };
- flash@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,en25q32b";
- reg = <1>;
- spi-max-frequency = <40000000>; /* input clock */
- partition@spi1 {
- label = "spi1";
- reg = <0x00000000 0x00400000>;
- };
- };
- flash@2 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at45db081d";
- reg = <2>;
- spi-max-frequency = <40000000>; /* input clock */
- partition@spi1 {
- label = "spi2";
- reg = <0x00000000 0x00100000>;
- };
- };
- flash@3 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,sst25wf040";
- reg = <3>;
- spi-max-frequency = <40000000>; /* input clock */
- partition@spi3 {
- label = "spi3";
- reg = <0x00000000 0x00080000>;
- };
- };
- };
-
- i2c@118000 {
- eeprom@51 {
- compatible = "at24,24c256";
- reg = <0x51>;
- };
- eeprom@53 {
- compatible = "at24,24c256";
- reg = <0x53>;
- };
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- interrupts = <0x1 0x1 0 0>;
- };
- };
-
- usb0: usb@210000 {
- phy_type = "ulpi";
- };
-
- usb1: usb@211000 {
- dr_mode = "host";
- phy_type = "ulpi";
- };
- };
-
- rio: rapidio@ffe0c0000 {
- reg = <0xf 0xfe0c0000 0 0x11000>;
-
- port1 {
- ranges = <0 0 0xc 0x20000000 0 0x10000000>;
- };
- port2 {
- ranges = <0 0 0xc 0x30000000 0 0x10000000>;
- };
- };
-
- lbc: localbus@ffe124000 {
- reg = <0xf 0xfe124000 0 0x1000>;
- ranges = <0 0 0xf 0xe8000000 0x08000000
- 2 0 0xf 0xffa00000 0x00040000
- 3 0 0xf 0xffdf0000 0x00008000>;
-
- flash@0,0 {
- compatible = "cfi-flash";
- reg = <0 0 0x08000000>;
- bank-width = <2>;
- device-width = <2>;
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- partition@0 {
- label = "NAND U-Boot Image";
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- partition@2000000 {
- label = "NAND Root File System";
- reg = <0x02000000 0x10000000>;
- };
-
- partition@12000000 {
- label = "NAND Compressed RFS Image";
- reg = <0x12000000 0x08000000>;
- };
-
- partition@1a000000 {
- label = "NAND Linux Kernel Image";
- reg = <0x1a000000 0x04000000>;
- };
-
- partition@1e000000 {
- label = "NAND DTB Image";
- reg = <0x1e000000 0x01000000>;
- };
-
- partition@1f000000 {
- label = "NAND Writable User area";
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- board-control@3,0 {
- compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
- reg = <3 0 0x100>;
- };
- };
-
- pci0: pcie@ffe200000 {
- reg = <0xf 0xfe200000 0 0x1000>;
- ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
- 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
- pcie@0 {
- ranges = <0x02000000 0 0xe0000000
- 0x02000000 0 0xe0000000
- 0 0x20000000
-
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00010000>;
- };
- };
-
- pci1: pcie@ffe201000 {
- reg = <0xf 0xfe201000 0 0x1000>;
- ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
- pcie@0 {
- ranges = <0x02000000 0 0xe0000000
- 0x02000000 0 0xe0000000
- 0 0x20000000
-
- 0x01000000 0 0x00000000
- 0x01000000 0 0x00000000
- 0 0x00010000>;
- };
- };
-};
-
-/include/ "fsl/p3060si-post.dtsi"
+++ /dev/null
-/*
- * SBC8560 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
- model = "SBC8560";
- compatible = "SBC8560";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8560@0 {
- device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <0x20>; // 32 bytes
- i-cache-line-size = <0x20>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>; // From uboot
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- soc@ff700000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- ranges = <0x0 0xff700000 0x00100000>;
- clock-frequency = <0>;
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <8>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8560-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8560-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <0x12 0x2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8560-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <0x20>; // 32 bytes
- cache-size = <0x40000>; // L2, 256K
- interrupt-parent = <&mpic>;
- interrupts = <0x10 0x2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <0x2b 0x2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8560-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8560-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8560-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8560-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
- phy0: ethernet-phy@19 {
- interrupt-parent = <&mpic>;
- interrupts = <0x6 0x1>;
- reg = <0x19>;
- device_type = "ethernet-phy";
- };
- phy1: ethernet-phy@1a {
- interrupt-parent = <&mpic>;
- interrupts = <0x7 0x1>;
- reg = <0x1a>;
- device_type = "ethernet-phy";
- };
- phy2: ethernet-phy@1b {
- interrupt-parent = <&mpic>;
- interrupts = <0x8 0x1>;
- reg = <0x1b>;
- device_type = "ethernet-phy";
- };
- phy3: ethernet-phy@1c {
- interrupt-parent = <&mpic>;
- interrupts = <0x8 0x1>;
- reg = <0x1c>;
- device_type = "ethernet-phy";
- };
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "TSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,open-pic";
- reg = <0x40000 0x40000>;
- device_type = "open-pic";
- };
-
- cpm@919c0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
- reg = <0x919c0 0x30>;
- ranges;
-
- muram@80000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x80000 0x10000>;
-
- data@0 {
- compatible = "fsl,cpm-muram-data";
- reg = <0x0 0x4000 0x9000 0x2000>;
- };
- };
-
- brg@919f0 {
- compatible = "fsl,mpc8560-brg",
- "fsl,cpm2-brg",
- "fsl,cpm-brg";
- reg = <0x919f0 0x10 0x915f0 0x10>;
- clock-frequency = <165000000>;
- };
-
- cpmpic: pic@90c00 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- interrupts = <0x2e 0x2>;
- interrupt-parent = <&mpic>;
- reg = <0x90c00 0x80>;
- compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
- };
-
- enet2: ethernet@91320 {
- device_type = "network";
- compatible = "fsl,mpc8560-fcc-enet",
- "fsl,cpm2-fcc-enet";
- reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- fsl,cpm-command = <0x16200300>;
- interrupts = <0x21 0x8>;
- interrupt-parent = <&cpmpic>;
- phy-handle = <&phy2>;
- };
-
- enet3: ethernet@91340 {
- device_type = "network";
- compatible = "fsl,mpc8560-fcc-enet",
- "fsl,cpm2-fcc-enet";
- reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- fsl,cpm-command = <0x1a400300>;
- interrupts = <0x22 0x8>;
- interrupt-parent = <&cpmpic>;
- phy-handle = <&phy3>;
- };
- };
-
- global-utilities@e0000 {
- compatible = "fsl,mpc8560-guts";
- reg = <0xe0000 0x1000>;
- };
- };
-
- pci0: pci@ff708000 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
- device_type = "pci";
- reg = <0xff708000 0x1000>;
- clock-frequency = <66666666>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
-
- /* IDSEL 0x02 */
- 0x1000 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x1000 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x1000 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x1000 0x0 0x0 0x4 &mpic 0x5 0x1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <0x18 0x2>;
- bus-range = <0x0 0x0>;
- ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
- };
-
- localbus@ff705000 {
- compatible = "fsl,mpc8560-localbus", "simple-bus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0xff705000 0x100>; // BRx, ORx, etc.
-
- ranges = <
- 0x0 0x0 0xff800000 0x0800000 // 8MB boot flash
- 0x1 0x0 0xe4000000 0x4000000 // 64MB flash
- 0x3 0x0 0x20000000 0x4000000 // 64MB SDRAM
- 0x4 0x0 0x24000000 0x4000000 // 64MB SDRAM
- 0x5 0x0 0xfc000000 0x0c00000 // EPLD
- 0x6 0x0 0xe0000000 0x4000000 // 64MB flash
- 0x7 0x0 0x80000000 0x0200000 // ATM1,2
- >;
-
- epld@5,0 {
- compatible = "wrs,epld-localbus";
- #address-cells = <2>;
- #size-cells = <1>;
- reg = <0x5 0x0 0xc00000>;
- ranges = <
- 0x0 0x0 0x5 0x000000 0x1fff // LED disp.
- 0x1 0x0 0x5 0x100000 0x1fff // switches
- 0x2 0x0 0x5 0x200000 0x1fff // ID reg.
- 0x3 0x0 0x5 0x300000 0x1fff // status reg.
- 0x4 0x0 0x5 0x400000 0x1fff // reset reg.
- 0x5 0x0 0x5 0x500000 0x1fff // Wind port
- 0x7 0x0 0x5 0x700000 0x1fff // UART #1
- 0x8 0x0 0x5 0x800000 0x1fff // UART #2
- 0x9 0x0 0x5 0x900000 0x1fff // RTC
- 0xb 0x0 0x5 0xb00000 0x1fff // EEPROM
- >;
-
- bidr@2,0 {
- compatible = "wrs,sbc8560-bidr";
- reg = <0x2 0x0 0x10>;
- };
-
- bcsr@3,0 {
- compatible = "wrs,sbc8560-bcsr";
- reg = <0x3 0x0 0x10>;
- };
-
- brstcr@4,0 {
- compatible = "wrs,sbc8560-brstcr";
- reg = <0x4 0x0 0x10>;
- };
-
- serial0: serial@7,0 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x7 0x0 0x100>;
- clock-frequency = <1843200>;
- interrupts = <0x9 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@8,0 {
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x8 0x0 0x100>;
- clock-frequency = <1843200>;
- interrupts = <0xa 0x2>;
- interrupt-parent = <&mpic>;
- };
-
- rtc@9,0 {
- compatible = "m48t59";
- reg = <0x9 0x0 0x1fff>;
- };
- };
- };
-};
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_SPARSE_IRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_MSDOS_PARTITION is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_CHRP is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
+CONFIG_TIPC=y
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=y
CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_PROC_DEVICETREE=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
-CONFIG_TUN=y
CONFIG_MII=y
-CONFIG_MARVELL_PHY=y
-CONFIG_NET_ETHERNET=y
+CONFIG_TUN=y
CONFIG_UCC_GETH=y
-# CONFIG_NETDEV_10000 is not set
-CONFIG_WAN=y
-CONFIG_HDLC=y
+CONFIG_MARVELL_PHY=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=y
+CONFIG_WAN=y
+CONFIG_HDLC=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
+++ /dev/null
-CONFIG_PPC_85xx=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_SBC8560=y
-CONFIG_BINFMT_MISC=y
-CONFIG_SPARSE_IRQ=y
-# CONFIG_SECCOMP is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_NETDEVICES=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_GIANFAR=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M48T59=y
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_P2041_RDB=y
CONFIG_P3041_DS=y
-CONFIG_P3060_QDS=y
CONFIG_P4080_DS=y
CONFIG_P5020_DS=y
CONFIG_HIGHMEM=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_FSL_LBC=y
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
# CONFIG_PCIEASPM is not set
CONFIG_RAPIDIO=y
CONFIG_FSL_RIO=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_OF=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SPARSE_IRQ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
CONFIG_P5020_DS=y
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
CONFIG_RAPIDIO=y
CONFIG_FSL_RIO=y
CONFIG_NET=y
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
+CONFIG_ATA=y
+CONFIG_SATA_FSL=y
+CONFIG_SATA_SIL24=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_HID=m
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_NLS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=m
CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_SPARSE_IRQ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
+CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_82xx=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
-CONFIG_FIXED_PHY=y
-CONFIG_NET_ETHERNET=y
CONFIG_FS_ENET=y
CONFIG_FS_ENET_MDIO_FCC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_FIXED_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_CPM=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
# CONFIG_HWMON is not set
CONFIG_USB_GADGET=y
CONFIG_USB_FSL_USB2=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_INFO=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_BDI_SWITCH=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_FTL=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
+CONFIG_IRQ_ALL_CPUS=y
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_FTL=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
struct qe_iram {
__be32 iadd; /* I-RAM Address Register */
__be32 idata; /* I-RAM Data Register */
- u8 res0[0x78];
+ u8 res0[0x04];
+ __be32 iready; /* I-RAM Ready Register */
+ u8 res1[0x70];
} __attribute__ ((packed));
/* QE Interrupt Controller */
/* I-RAM */
#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */
#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */
+#define QE_IRAM_READY 0x80000000 /* Ready */
/* UPC */
#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
/* SPE Unavailable */
START_EXCEPTION(SPEUnavailable)
NORMAL_EXCEPTION_PROLOG(SPE_UNAVAIL)
- bne load_up_spe
- addi r3,r1,STACK_FRAME_OVERHEAD
+ beq 1f
+ bl load_up_spe
+ b fast_exception_return
+1: addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0x2010, KernelSPE)
#else
EXCEPTION(0x2020, SPE_UNAVAIL, SPEUnavailable, \
/* Note that the SPE support is closely modeled after the AltiVec
* support. Changes to one are likely to be applicable to the
* other! */
-load_up_spe:
+_GLOBAL(load_up_spe)
/*
* Disable SPE for the task which had SPE previously,
* and save its SPE registers in its thread_struct.
subi r4,r5,THREAD
stw r4,last_task_used_spe@l(r3)
#endif /* !CONFIG_SMP */
- /* restore registers and return */
-2: REST_4GPRS(3, r11)
- lwz r10,_CCR(r11)
- REST_GPR(1, r11)
- mtcr r10
- lwz r10,_LINK(r11)
- mtlr r10
- REST_GPR(10, r11)
- mtspr SPRN_SRR1,r9
- mtspr SPRN_SRR0,r12
- REST_GPR(9, r11)
- REST_GPR(12, r11)
- lwz r11,GPR11(r11)
- rfi
+ blr
/*
* SPE unavailable trap from kernel - print a message, but let
arch_initcall(powerpc_debugfs_init);
#endif
+#ifdef CONFIG_BOOKE_WDT
+extern u32 booke_wdt_enabled;
+extern u32 booke_wdt_period;
+
+/* Checks wdt=x and wdt_period=xx command-line option */
+notrace int __init early_parse_wdt(char *p)
+{
+ if (p && strncmp(p, "0", 1) != 0)
+ booke_wdt_enabled = 1;
+
+ return 0;
+}
+early_param("wdt", early_parse_wdt);
+
+int __init early_parse_wdt_period(char *p)
+{
+ unsigned long ret;
+ if (p) {
+ if (!kstrtol(p, 0, &ret))
+ booke_wdt_period = ret;
+ }
+
+ return 0;
+}
+early_param("wdt_period", early_parse_wdt_period);
+#endif /* CONFIG_BOOKE_WDT */
+
void ppc_printk_progress(char *s, unsigned short hex)
{
pr_info("%s\n", s);
ppc_md.progress("id mach(): done", 0x200);
}
-#ifdef CONFIG_BOOKE_WDT
-extern u32 booke_wdt_enabled;
-extern u32 booke_wdt_period;
-
-/* Checks wdt=x and wdt_period=xx command-line option */
-notrace int __init early_parse_wdt(char *p)
-{
- if (p && strncmp(p, "0", 1) != 0)
- booke_wdt_enabled = 1;
-
- return 0;
-}
-early_param("wdt", early_parse_wdt);
-
-int __init early_parse_wdt_period (char *p)
-{
- if (p)
- booke_wdt_period = simple_strtoul(p, NULL, 0);
-
- return 0;
-}
-early_param("wdt_period", early_parse_wdt_period);
-#endif /* CONFIG_BOOKE_WDT */
-
/* Checks "l2cr=xxxx" command-line option */
int __init ppc_setup_l2cr(char *str)
{
{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXP */
{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXN */
{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* RXD */
+
+ /* SPI */
+ {3, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MISO PD16 */
+ {3, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MOSI PD17 */
+ {3, 18, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_CLK PD18 */
};
static void __init init_ioports(void)
* Author: Heiko Schocher <hs@denx.de>
*
* Description:
- * Keymile KMETER1 board specific routines.
+ * Keymile 83xx platform specific routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
for_each_node_by_name(np, "spi")
par_io_of_config(np);
- for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+ for_each_node_by_name(np, "ucc")
par_io_of_config(np);
}
np = of_find_compatible_node(NULL, "network", "ucc_geth");
if (np != NULL) {
- uint svid;
+ /*
+ * handle mpc8360E Erratum QE_ENET10:
+ * RGMII AC values do not meet the specification
+ */
+ uint svid = mfspr(SPRN_SVR);
+ struct device_node *np_par;
+ struct resource res;
+ void __iomem *base;
+ int ret;
+
+ np_par = of_find_node_by_name(NULL, "par_io");
+ if (np_par == NULL) {
+ printk(KERN_WARNING "%s couldn;t find par_io node\n",
+ __func__);
+ return;
+ }
+ /* Map Parallel I/O ports registers */
+ ret = of_address_to_resource(np_par, 0, &res);
+ if (ret) {
+ printk(KERN_WARNING "%s couldn;t map par_io registers\n",
+ __func__);
+ return;
+ }
+
+ base = ioremap(res.start, res.end - res.start + 1);
+
+ /*
+ * set output delay adjustments to default values according
+ * table 5 in Errata Rev. 5, 9/2011:
+ *
+ * write 0b01 to UCC1 bits 18:19
+ * write 0b01 to UCC2 option 1 bits 4:5
+ * write 0b01 to UCC2 option 2 bits 16:17
+ */
+ clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000);
+
+ /*
+ * set output delay adjustments to default values according
+ * table 3-13 in Reference Manual Rev.3 05/2010:
+ *
+ * write 0b01 to UCC2 option 2 bits 16:17
+ * write 0b0101 to UCC1 bits 20:23
+ * write 0b0101 to UCC2 option 1 bits 24:27
+ */
+ clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550);
- /* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
- svid = mfspr(SPRN_SVR);
if (SVR_REV(svid) == 0x0021) {
- struct device_node *np_par;
- struct resource res;
- void __iomem *base;
- int ret;
-
- np_par = of_find_node_by_name(NULL, "par_io");
- if (np_par == NULL) {
- printk(KERN_WARNING "%s couldn;t find par_io node\n",
- __func__);
- return;
- }
- /* Map Parallel I/O ports registers */
- ret = of_address_to_resource(np_par, 0, &res);
- if (ret) {
- printk(KERN_WARNING "%s couldn;t map par_io registers\n",
- __func__);
- return;
- }
- base = ioremap(res.start, resource_size(&res));
+ /*
+ * UCC2 option 1: write 0b1010 to bits 24:27
+ * at address IMMRBAR+0x14AC
+ */
+ clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0);
+ } else if (SVR_REV(svid) == 0x0020) {
+ /*
+ * UCC1: write 0b11 to bits 18:19
+ * at address IMMRBAR+0x14A8
+ */
+ setbits32((base + 0xa8), 0x00003000);
/*
- * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
- * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
+ * UCC2 option 1: write 0b11 to bits 4:5
+ * at address IMMRBAR+0x14A8
*/
- setbits32((base + 0xa8), 0x0c003000);
+ setbits32((base + 0xa8), 0x0c000000);
/*
- * IMMR + 0x14AC[20:27] = 10101010
- * (data delay for both UCC's)
+ * UCC2 option 2: write 0b11 to bits 16:17
+ * at address IMMRBAR+0x14AC
*/
- clrsetbits_be32((base + 0xac), 0xff0, 0xaa0);
- iounmap(base);
- of_node_put(np_par);
+ setbits32((base + 0xac), 0x0000c000);
}
+ iounmap(base);
+ of_node_put(np_par);
of_node_put(np);
}
-#endif /* CONFIG_QUICC_ENGINE */
+#endif /* CONFIG_QUICC_ENGINE */
}
machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);
cache-sram-size and cache-sram-offset kernel boot
parameters should be passed when this option is enabled.
+config BSC9131_RDB
+ bool "Freescale BSC9131RDB"
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the Freescale BSC9131RDB board.
+ The BSC9131 is a heterogeneous SoC containing an e500v2 powerpc and a
+ StarCore SC3850 DSP
+ Manufacturer : Freescale Semiconductor, Inc
+
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
select DEFAULT_UIMAGE
help
This option enables support for the Wind River SBC8548 board
-config SBC8560
- bool "Wind River SBC8560"
- select DEFAULT_UIMAGE
- help
- This option enables support for the Wind River SBC8560 board
-
config GE_IMP3A
bool "GE Intelligent Platforms IMP3A"
select DEFAULT_UIMAGE
help
This option enables support for the P3041 DS board
-config P3060_QDS
- bool "Freescale P3060 QDS"
- select DEFAULT_UIMAGE
- select PPC_E500MC
- select PHYS_64BIT
- select SWIOTLB
- select GPIO_MPC8XXX
- select HAS_RAPIDIO
- select PPC_EPAPR_HV_PIC
- help
- This option enables support for the P3060 QDS board
-
config P4080_DS
bool "Freescale P4080 DS"
select DEFAULT_UIMAGE
help
This option enables support for the P5020 DS board
+config PPC_QEMU_E500
+ bool "QEMU generic e500 platform"
+ depends on EXPERIMENTAL
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for running as a QEMU guest using
+ QEMU's generic e500 machine. This is not required if you're
+ using a QEMU machine that targets a specific board, such as
+ mpc8544ds.
+
+ Unlike most e500 boards that target a specific CPU, this
+ platform works with any e500-family CPU that QEMU supports.
+ Thus, you'll need to make sure CONFIG_PPC_E500MC is set or
+ unset based on the emulated CPU (or actual host CPU in the case
+ of KVM).
+
endif # FSL_SOC_BOOKE
config TQM85xx
obj-y += common.o
+obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
-obj-$(CONFIG_P3060_QDS) += p3060_qds.o corenet_ds.o
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
-obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o
+obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o
--- /dev/null
+/*
+ * BSC913xRDB Board Setup
+ *
+ * Author: Priyanka Jain <Priyanka.Jain@freescale.com>
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/udbg.h>
+
+#include "mpc85xx.h"
+
+void __init bsc913x_rdb_pic_init(void)
+{
+ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+
+ if (!mpic)
+ pr_err("bsc913x: Failed to allocate MPIC structure\n");
+ else
+ mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init bsc913x_rdb_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("bsc913x_rdb_setup_arch()", 0);
+
+ pr_info("bsc913x board from Freescale Semiconductor\n");
+}
+
+machine_device_initcall(bsc9131_rdb, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+
+static int __init bsc9131_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,bsc9131rdb");
+}
+
+define_machine(bsc9131_rdb) {
+ .name = "BSC9131 RDB",
+ .probe = bsc9131_rdb_probe,
+ .setup_arch = bsc913x_rdb_setup_arch,
+ .init_IRQ = bsc913x_rdb_pic_init,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
}
#ifdef CONFIG_PCI
-static int primary_phb_addr;
extern int uli_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn);
+static struct device_node *pci_with_uli;
+
static int mpc85xx_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn)
{
- struct device_node* node;
- struct resource rsrc;
-
- node = hose->dn;
- of_address_to_resource(node, 0, &rsrc);
-
- if ((rsrc.start & 0xfffff) == primary_phb_addr) {
+ if (hose->dn == pci_with_uli)
return uli_exclude_device(hose, bus, devfn);
- }
return PCIBIOS_SUCCESSFUL;
}
#endif /* CONFIG_PCI */
-/*
- * Setup the architecture
- */
-static void __init mpc85xx_ds_setup_arch(void)
+static void __init mpc85xx_ds_pci_init(void)
{
#ifdef CONFIG_PCI
- struct device_node *np;
- struct pci_controller *hose;
-#endif
- dma_addr_t max = 0xffffffff;
+ struct device_node *node;
- if (ppc_md.progress)
- ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
+ fsl_pci_init();
-#ifdef CONFIG_PCI
- for_each_node_by_type(np, "pci") {
- if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
- of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
- of_device_is_compatible(np, "fsl,p2020-pcie")) {
- struct resource rsrc;
- of_address_to_resource(np, 0, &rsrc);
- if ((rsrc.start & 0xfffff) == primary_phb_addr)
- fsl_add_bridge(np, 1);
- else
- fsl_add_bridge(np, 0);
-
- hose = pci_find_hose_for_OF_device(np);
- max = min(max, hose->dma_window_base_cur +
- hose->dma_window_size);
+ /* See if we have a ULI under the primary */
+
+ node = of_find_node_by_name(NULL, "uli1575");
+ while ((pci_with_uli = of_get_parent(node))) {
+ of_node_put(node);
+ node = pci_with_uli;
+
+ if (pci_with_uli == fsl_pci_primary) {
+ ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+ break;
}
}
-
- ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
+}
- mpc85xx_smp_init();
+/*
+ * Setup the architecture
+ */
+static void __init mpc85xx_ds_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
-#ifdef CONFIG_SWIOTLB
- if ((memblock_end_of_DRAM() - 1) > max) {
- ppc_swiotlb_enable = 1;
- set_pci_dma_ops(&swiotlb_dma_ops);
- ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
- }
-#endif
+ mpc85xx_ds_pci_init();
+ mpc85xx_smp_init();
printk("MPC85xx DS board from Freescale Semiconductor\n");
}
{
unsigned long root = of_get_flat_dt_root();
- if (of_flat_dt_is_compatible(root, "MPC8544DS")) {
-#ifdef CONFIG_PCI
- primary_phb_addr = 0xb000;
-#endif
- return 1;
- }
-
- return 0;
+ return !!of_flat_dt_is_compatible(root, "MPC8544DS");
}
machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
{
unsigned long root = of_get_flat_dt_root();
- if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS")) {
-#ifdef CONFIG_PCI
- primary_phb_addr = 0x8000;
-#endif
- return 1;
- }
-
- return 0;
+ return !!of_flat_dt_is_compatible(root, "fsl,MPC8572DS");
}
/*
{
unsigned long root = of_get_flat_dt_root();
- if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
-#ifdef CONFIG_PCI
- primary_phb_addr = 0x9000;
-#endif
- return 1;
- }
-
- return 0;
+ return !!of_flat_dt_is_compatible(root, "fsl,P2020DS");
}
define_machine(mpc8544_ds) {
machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
+machine_device_initcall(p1024_rdb, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
return of_flat_dt_is_compatible(root, "fsl,P1020UTM-PC");
}
+static int __init p1024_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,P1024RDB");
+}
+
define_machine(p2020_rdb) {
.name = "P2020 RDB",
.probe = p2020_rdb_probe,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
+
+define_machine(p1024_rdb) {
+ .name = "P1024 RDB",
+ .probe = p1024_rdb_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
#include <sysdev/fsl_pci.h>
#include <asm/udbg.h>
#include <asm/fsl_guts.h>
+#include <asm/fsl_lbc.h>
#include "smp.h"
#include "mpc85xx.h"
{
}
+struct fsl_law {
+ u32 lawbar;
+ u32 reserved1;
+ u32 lawar;
+ u32 reserved[5];
+};
+
+#define LAWBAR_MASK 0x00F00000
+#define LAWBAR_SHIFT 12
+
+#define LAWAR_EN 0x80000000
+#define LAWAR_TGT_MASK 0x01F00000
+#define LAW_TRGT_IF_LBC (0x04 << 20)
+
+#define LAWAR_MASK (LAWAR_EN | LAWAR_TGT_MASK)
+#define LAWAR_MATCH (LAWAR_EN | LAW_TRGT_IF_LBC)
+
+#define BR_BA 0xFFFF8000
+
+/*
+ * Map a BRx value to a physical address
+ *
+ * The localbus BRx registers only store the lower 32 bits of the address. To
+ * obtain the upper four bits, we need to scan the LAW table. The entry which
+ * maps to the localbus will contain the upper four bits.
+ */
+static phys_addr_t lbc_br_to_phys(const void *ecm, unsigned int count, u32 br)
+{
+#ifndef CONFIG_PHYS_64BIT
+ /*
+ * If we only have 32-bit addressing, then the BRx address *is* the
+ * physical address.
+ */
+ return br & BR_BA;
+#else
+ const struct fsl_law *law = ecm + 0xc08;
+ unsigned int i;
+
+ for (i = 0; i < count; i++) {
+ u64 lawbar = in_be32(&law[i].lawbar);
+ u32 lawar = in_be32(&law[i].lawar);
+
+ if ((lawar & LAWAR_MASK) == LAWAR_MATCH)
+ /* Extract the upper four bits */
+ return (br & BR_BA) | ((lawbar & LAWBAR_MASK) << 12);
+ }
+
+ return 0;
+#endif
+}
+
/**
* p1022ds_set_monitor_port: switch the output to a different monitor port
- *
*/
static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
{
struct device_node *guts_node;
- struct device_node *indirect_node = NULL;
+ struct device_node *lbc_node = NULL;
+ struct device_node *law_node = NULL;
struct ccsr_guts __iomem *guts;
+ struct fsl_lbc_regs *lbc = NULL;
+ void *ecm = NULL;
u8 __iomem *lbc_lcs0_ba = NULL;
u8 __iomem *lbc_lcs1_ba = NULL;
+ phys_addr_t cs0_addr, cs1_addr;
+ const __be32 *iprop;
+ unsigned int num_laws;
u8 b;
/* Map the global utilities registers. */
goto exit;
}
- indirect_node = of_find_compatible_node(NULL, NULL,
- "fsl,p1022ds-indirect-pixis");
- if (!indirect_node) {
- pr_err("p1022ds: missing pixis indirect mode node\n");
+ lbc_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
+ if (!lbc_node) {
+ pr_err("p1022ds: missing localbus node\n");
goto exit;
}
- lbc_lcs0_ba = of_iomap(indirect_node, 0);
- if (!lbc_lcs0_ba) {
- pr_err("p1022ds: could not map localbus chip select 0\n");
+ lbc = of_iomap(lbc_node, 0);
+ if (!lbc) {
+ pr_err("p1022ds: could not map localbus node\n");
goto exit;
}
- lbc_lcs1_ba = of_iomap(indirect_node, 1);
- if (!lbc_lcs1_ba) {
- pr_err("p1022ds: could not map localbus chip select 1\n");
+ law_node = of_find_compatible_node(NULL, NULL, "fsl,ecm-law");
+ if (!law_node) {
+ pr_err("p1022ds: missing local access window node\n");
goto exit;
}
+ ecm = of_iomap(law_node, 0);
+ if (!ecm) {
+ pr_err("p1022ds: could not map local access window node\n");
+ goto exit;
+ }
+
+ iprop = of_get_property(law_node, "fsl,num-laws", 0);
+ if (!iprop) {
+ pr_err("p1022ds: LAW node is missing fsl,num-laws property\n");
+ goto exit;
+ }
+ num_laws = be32_to_cpup(iprop);
+
+ cs0_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[0].br));
+ cs1_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[1].br));
+
+ lbc_lcs0_ba = ioremap(cs0_addr, 1);
+ lbc_lcs1_ba = ioremap(cs1_addr, 1);
+
/* Make sure we're in indirect mode first. */
if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
PMUXCR_ELBCDIU_DIU) {
iounmap(lbc_lcs1_ba);
if (lbc_lcs0_ba)
iounmap(lbc_lcs0_ba);
+ if (lbc)
+ iounmap(lbc);
+ if (ecm)
+ iounmap(ecm);
if (guts)
iounmap(guts);
- of_node_put(indirect_node);
+ of_node_put(law_node);
+ of_node_put(lbc_node);
of_node_put(guts_node);
}
+++ /dev/null
-/*
- * P3060 QDS Setup
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/phy.h>
-#include <asm/machdep.h>
-#include <asm/udbg.h>
-#include <asm/mpic.h>
-#include <linux/of_platform.h>
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-#include <asm/ehv_pic.h>
-#include "corenet_ds.h"
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init p3060_qds_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-#ifdef CONFIG_SMP
- extern struct smp_ops_t smp_85xx_ops;
-#endif
-
- if (of_flat_dt_is_compatible(root, "fsl,P3060QDS"))
- return 1;
-
- /* Check if we're running under the Freescale hypervisor */
- if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) {
- ppc_md.init_IRQ = ehv_pic_init;
- ppc_md.get_irq = ehv_pic_get_irq;
- ppc_md.restart = fsl_hv_restart;
- ppc_md.power_off = fsl_hv_halt;
- ppc_md.halt = fsl_hv_halt;
-#ifdef CONFIG_SMP
- /*
- * Disable the timebase sync operations because we can't write
- * to the timebase registers under the hypervisor.
- */
- smp_85xx_ops.give_timebase = NULL;
- smp_85xx_ops.take_timebase = NULL;
-#endif
- return 1;
- }
-
- return 0;
-}
-
-define_machine(p3060_qds) {
- .name = "P3060 QDS",
- .probe = p3060_qds_probe,
- .setup_arch = corenet_ds_setup_arch,
- .init_IRQ = corenet_ds_pic_init,
-#ifdef CONFIG_PCI
- .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
-#endif
- .get_irq = mpic_get_coreint_irq,
- .restart = fsl_rstcr_restart,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
- .power_save = e500_idle,
-};
-
-machine_device_initcall(p3060_qds, corenet_ds_publish_devices);
-
-#ifdef CONFIG_SWIOTLB
-machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);
-#endif
--- /dev/null
+/*
+ * Paravirt target for a generic QEMU e500 machine
+ *
+ * This is intended to be a flexible device-tree-driven platform, not fixed
+ * to a particular piece of hardware or a particular spec of virtual hardware,
+ * beyond the assumption of an e500-family CPU. Some things are still hardcoded
+ * here, such as MPIC, but this is a limitation of the current code rather than
+ * an interface contract with QEMU.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_fdt.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+#include "mpc85xx.h"
+
+void __init qemu_e500_pic_init(void)
+{
+ struct mpic *mpic;
+
+ mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+}
+
+static void __init qemu_e500_setup_arch(void)
+{
+ ppc_md.progress("qemu_e500_setup_arch()", 0);
+
+ fsl_pci_init();
+ mpc85xx_smp_init();
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init qemu_e500_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return !!of_flat_dt_is_compatible(root, "fsl,qemu-e500");
+}
+
+machine_device_initcall(qemu_e500, mpc85xx_common_publish_devices);
+
+define_machine(qemu_e500) {
+ .name = "QEMU e500",
+ .probe = qemu_e500_probe,
+ .setup_arch = qemu_e500_setup_arch,
+ .init_IRQ = qemu_e500_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+++ /dev/null
-/*
- * Wind River SBC8560 setup and early boot code.
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * By Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/of_platform.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpic.h>
-#include <mm/mmu_decl.h>
-#include <asm/udbg.h>
-
-#include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pci.h>
-
-#include "mpc85xx.h"
-
-#ifdef CONFIG_CPM2
-#include <asm/cpm2.h>
-#include <sysdev/cpm2_pic.h>
-#endif
-
-static void __init sbc8560_pic_init(void)
-{
- struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
- 0, 256, " OpenPIC ");
- BUG_ON(mpic == NULL);
- mpic_init(mpic);
-
- mpc85xx_cpm2_pic_init();
-}
-
-/*
- * Setup the architecture
- */
-#ifdef CONFIG_CPM2
-struct cpm_pin {
- int port, pin, flags;
-};
-
-static const struct cpm_pin sbc8560_pins[] = {
- /* SCC1 */
- {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
- {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
- /* SCC2 */
- {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-
- /* FCC2 */
- {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
- {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
- {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
-
- /* FCC3 */
- {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
- {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
- {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
- {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
-};
-
-static void __init init_ioports(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
- const struct cpm_pin *pin = &sbc8560_pins[i];
- cpm2_set_pin(pin->port, pin->pin, pin->flags);
- }
-
- cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
- cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
- cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
- cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
- cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
-}
-#endif
-
-static void __init sbc8560_setup_arch(void)
-{
-#ifdef CONFIG_PCI
- struct device_node *np;
-#endif
-
- if (ppc_md.progress)
- ppc_md.progress("sbc8560_setup_arch()", 0);
-
-#ifdef CONFIG_CPM2
- cpm2_reset();
- init_ioports();
-#endif
-
-#ifdef CONFIG_PCI
- for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
- fsl_add_bridge(np, 1);
-#endif
-}
-
-static void sbc8560_show_cpuinfo(struct seq_file *m)
-{
- uint pvid, svid, phid1;
-
- pvid = mfspr(SPRN_PVR);
- svid = mfspr(SPRN_SVR);
-
- seq_printf(m, "Vendor\t\t: Wind River\n");
- seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
- seq_printf(m, "SVR\t\t: 0x%x\n", svid);
-
- /* Display cpu Pll setting */
- phid1 = mfspr(SPRN_HID1);
- seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
-}
-
-machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init sbc8560_probe(void)
-{
- unsigned long root = of_get_flat_dt_root();
-
- return of_flat_dt_is_compatible(root, "SBC8560");
-}
-
-#ifdef CONFIG_RTC_DRV_M48T59
-static int __init sbc8560_rtc_init(void)
-{
- struct device_node *np;
- struct resource res;
- struct platform_device *rtc_dev;
-
- np = of_find_compatible_node(NULL, NULL, "m48t59");
- if (np == NULL) {
- printk("No RTC in DTB. Has it been eaten by wild dogs?\n");
- return -ENODEV;
- }
-
- of_address_to_resource(np, 0, &res);
- of_node_put(np);
-
- printk("Found RTC (m48t59) at i/o 0x%x\n", res.start);
-
- rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1);
-
- if (IS_ERR(rtc_dev)) {
- printk("Registering sbc8560 RTC device failed\n");
- return PTR_ERR(rtc_dev);
- }
-
- return 0;
-}
-
-arch_initcall(sbc8560_rtc_init);
-
-#endif /* M48T59 */
-
-static __u8 __iomem *brstcr;
-
-static int __init sbc8560_bdrstcr_init(void)
-{
- struct device_node *np;
- struct resource res;
-
- np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
- if (np == NULL) {
- printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
- return -ENODEV;
- }
-
- of_address_to_resource(np, 0, &res);
-
- printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
-
- brstcr = ioremap(res.start, resource_size(&res));
- if(!brstcr)
- printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
-
- of_node_put(np);
-
- return 0;
-}
-
-arch_initcall(sbc8560_bdrstcr_init);
-
-void sbc8560_rstcr_restart(char * cmd)
-{
- local_irq_disable();
- if(brstcr)
- clrbits8(brstcr, 0x80);
-
- while(1);
-}
-
-define_machine(sbc8560) {
- .name = "SBC8560",
- .probe = sbc8560_probe,
- .setup_arch = sbc8560_setup_arch,
- .init_IRQ = sbc8560_pic_init,
- .show_cpuinfo = sbc8560_show_cpuinfo,
- .get_irq = mpic_get_irq,
- .restart = sbc8560_rstcr_restart,
- .calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
-};
bool "e500mc Support"
select PPC_FPU
depends on E500
+ help
+ This must be enabled for running on e500mc (and derivatives
+ such as e5500/e6500), and must be disabled for running on
+ e500v1 or e500v2.
config PPC_FPU
bool
/*
* MPC83xx/85xx/86xx PCI/PCIE support routing.
*
- * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
* Copyright 2008-2009 MontaVista Software, Inc.
*
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
-static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
+static void __devinit quirk_fsl_pcie_header(struct pci_dev *dev)
{
u8 progif;
return 0;
}
+
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
+static const struct of_device_id pci_ids[] = {
+ { .compatible = "fsl,mpc8540-pci", },
+ { .compatible = "fsl,mpc8548-pcie", },
+ { .compatible = "fsl,mpc8610-pci", },
+ { .compatible = "fsl,mpc8641-pcie", },
+ { .compatible = "fsl,p1022-pcie", },
+ { .compatible = "fsl,p1010-pcie", },
+ { .compatible = "fsl,p1023-pcie", },
+ { .compatible = "fsl,p4080-pcie", },
+ { .compatible = "fsl,qoriq-pcie-v2.3", },
+ { .compatible = "fsl,qoriq-pcie-v2.2", },
+ {},
+};
+
+struct device_node *fsl_pci_primary;
+
+void __devinit fsl_pci_init(void)
+{
+ struct device_node *node;
+ struct pci_controller *hose;
+ dma_addr_t max = 0xffffffff;
+
+ /* Callers can specify the primary bus using other means. */
+ if (!fsl_pci_primary) {
+ /* If a PCI host bridge contains an ISA node, it's primary. */
+ node = of_find_node_by_type(NULL, "isa");
+ while ((fsl_pci_primary = of_get_parent(node))) {
+ of_node_put(node);
+ node = fsl_pci_primary;
+
+ if (of_match_node(pci_ids, node))
+ break;
+ }
+ }
+
+ node = NULL;
+ for_each_node_by_type(node, "pci") {
+ if (of_match_node(pci_ids, node)) {
+ /*
+ * If there's no PCI host bridge with ISA, arbitrarily
+ * designate one as primary. This can go away once
+ * various bugs with primary-less systems are fixed.
+ */
+ if (!fsl_pci_primary)
+ fsl_pci_primary = node;
+
+ fsl_add_bridge(node, fsl_pci_primary == node);
+ hose = pci_find_hose_for_OF_device(node);
+ max = min(max, hose->dma_window_base_cur +
+ hose->dma_window_size);
+ }
+ }
+
+#ifdef CONFIG_SWIOTLB
+ /*
+ * if we couldn't map all of DRAM via the dma windows
+ * we need SWIOTLB to handle buffers located outside of
+ * dma capable memory region
+ */
+ if (memblock_end_of_DRAM() - 1 > max) {
+ ppc_swiotlb_enable = 1;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ }
+#endif
+}
+#endif
extern int mpc83xx_add_bridge(struct device_node *dev);
u64 fsl_pci_immrbar_base(struct pci_controller *hose);
+extern struct device_node *fsl_pci_primary;
+
+#ifdef CONFIG_FSL_PCI
+void fsl_pci_init(void);
+#else
+static inline void fsl_pci_init(void) {}
+#endif
+
#endif /* __POWERPC_FSL_PCI_H */
#endif /* __KERNEL__ */
if (of_get_property(node, "single-cpu-affinity", NULL))
flags |= MPIC_SINGLE_DEST_CPU;
if (of_device_is_compatible(node, "fsl,mpic"))
- flags |= MPIC_FSL;
+ flags |= MPIC_FSL | MPIC_LARGE_VECTORS;
mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
for (i = 0; i < be32_to_cpu(ucode->count); i++)
out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
+
+ /* Set I-RAM Ready Register */
+ out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
}
/*
config BOOKE_WDT_DEFAULT_TIMEOUT
int "PowerPC Book-E Watchdog Timer Default Timeout"
depends on BOOKE_WDT
- default 38 if FSL_BOOKE
- range 0 63 if FSL_BOOKE
- default 3 if !FSL_BOOKE
- range 0 3 if !FSL_BOOKE
+ default 38 if PPC_FSL_BOOK3E
+ range 0 63 if PPC_FSL_BOOK3E
+ default 3 if !PPC_FSL_BOOK3E
+ range 0 3 if !PPC_FSL_BOOK3E
help
Select the default watchdog timer period to be used by the PowerPC
Book-E watchdog driver. A watchdog "event" occurs when the bit
u32 booke_wdt_enabled;
u32 booke_wdt_period = CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT;
-#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_PPC_FSL_BOOK3E
#define WDTP(x) ((((x)&0x3)<<30)|(((x)&0x3c)<<15))
#define WDTP_MASK (WDTP(0x3f))
#else
case WDIOC_SETTIMEOUT:
if (get_user(tmp, p))
return -EFAULT;
-#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_PPC_FSL_BOOK3E
/* period of 1 gives the largest possible timeout */
if (tmp > period_to_sec(1))
return -EINVAL;
projects / deliverable / linux.git / commitdiff
