powerpc/p1010rdb: Update dts for pcie interrupt-map

p1010rdb uses the irq[4:5] for inta and intb to pcie,
it is active-high, so set it.

Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
index 0f0ced69835a066e9358f1ca08a04853b71d33df..14b62950503893dc323913be9870188c12e2115f 100644 (file)
--- a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
@@ -215,3 +215,19 @@
                phy-connection-type = "sgmii";
        };
 };
+
+&pci0 {
+       pcie@0 {
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       /*
+                        *irq[4:5] are active-high
+                        *irq[6:7] are active-low
+                        */
+                       0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+                       0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+                       0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+                       0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+                       >;
+       };
+};