#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/mtd/nand.h>
#include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/mtd/mtd.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
/*
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
/*
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#define PWR_PWRON_IRQ (1 << 0)
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_MENELAUS) += menelaus.o
-obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o
+obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o
obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
obj-$(CONFIG_TWL4030_CODEC) += twl4030-codec.o
--- /dev/null
+/*
+ * twl4030_core.c - driver for TWL4030/TPS659x0 PM and audio CODEC devices
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * Modifications to defer interrupt handling to a kernel thread:
+ * Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * Code cleanup and modifications to IRQ handler.
+ * by syed khasim <x0khasim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/regulator/machine.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/twl.h>
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#include <plat/cpu.h>
+#endif
+
+/*
+ * The TWL4030 "Triton 2" is one of a family of a multi-function "Power
+ * Management and System Companion Device" chips originally designed for
+ * use in OMAP2 and OMAP 3 based systems. Its control interfaces use I2C,
+ * often at around 3 Mbit/sec, including for interrupt handling.
+ *
+ * This driver core provides genirq support for the interrupts emitted,
+ * by the various modules, and exports register access primitives.
+ *
+ * FIXME this driver currently requires use of the first interrupt line
+ * (and associated registers).
+ */
+
+#define DRIVER_NAME "twl4030"
+
+#if defined(CONFIG_TWL4030_BCI_BATTERY) || \
+ defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
+#define twl_has_bci() true
+#else
+#define twl_has_bci() false
+#endif
+
+#if defined(CONFIG_KEYBOARD_TWL4030) || defined(CONFIG_KEYBOARD_TWL4030_MODULE)
+#define twl_has_keypad() true
+#else
+#define twl_has_keypad() false
+#endif
+
+#if defined(CONFIG_GPIO_TWL4030) || defined(CONFIG_GPIO_TWL4030_MODULE)
+#define twl_has_gpio() true
+#else
+#define twl_has_gpio() false
+#endif
+
+#if defined(CONFIG_REGULATOR_TWL4030) \
+ || defined(CONFIG_REGULATOR_TWL4030_MODULE)
+#define twl_has_regulator() true
+#else
+#define twl_has_regulator() false
+#endif
+
+#if defined(CONFIG_TWL4030_MADC) || defined(CONFIG_TWL4030_MADC_MODULE)
+#define twl_has_madc() true
+#else
+#define twl_has_madc() false
+#endif
+
+#ifdef CONFIG_TWL4030_POWER
+#define twl_has_power() true
+#else
+#define twl_has_power() false
+#endif
+
+#if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE)
+#define twl_has_rtc() true
+#else
+#define twl_has_rtc() false
+#endif
+
+#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE)
+#define twl_has_usb() true
+#else
+#define twl_has_usb() false
+#endif
+
+#if defined(CONFIG_TWL4030_WATCHDOG) || \
+ defined(CONFIG_TWL4030_WATCHDOG_MODULE)
+#define twl_has_watchdog() true
+#else
+#define twl_has_watchdog() false
+#endif
+
+#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE)
+#define twl_has_codec() true
+#else
+#define twl_has_codec() false
+#endif
+
+/* Triton Core internal information (BEGIN) */
+
+/* Last - for index max*/
+#define TWL4030_MODULE_LAST TWL4030_MODULE_SECURED_REG
+
+#define TWL4030_NUM_SLAVES 4
+
+#if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \
+ || defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE)
+#define twl_has_pwrbutton() true
+#else
+#define twl_has_pwrbutton() false
+#endif
+
+/* Base Address defns for twl4030_map[] */
+
+/* subchip/slave 0 - USB ID */
+#define TWL4030_BASEADD_USB 0x0000
+
+/* subchip/slave 1 - AUD ID */
+#define TWL4030_BASEADD_AUDIO_VOICE 0x0000
+#define TWL4030_BASEADD_GPIO 0x0098
+#define TWL4030_BASEADD_INTBR 0x0085
+#define TWL4030_BASEADD_PIH 0x0080
+#define TWL4030_BASEADD_TEST 0x004C
+
+/* subchip/slave 2 - AUX ID */
+#define TWL4030_BASEADD_INTERRUPTS 0x00B9
+#define TWL4030_BASEADD_LED 0x00EE
+#define TWL4030_BASEADD_MADC 0x0000
+#define TWL4030_BASEADD_MAIN_CHARGE 0x0074
+#define TWL4030_BASEADD_PRECHARGE 0x00AA
+#define TWL4030_BASEADD_PWM0 0x00F8
+#define TWL4030_BASEADD_PWM1 0x00FB
+#define TWL4030_BASEADD_PWMA 0x00EF
+#define TWL4030_BASEADD_PWMB 0x00F1
+#define TWL4030_BASEADD_KEYPAD 0x00D2
+
+#define TWL5031_BASEADD_ACCESSORY 0x0074 /* Replaces Main Charge */
+#define TWL5031_BASEADD_INTERRUPTS 0x00B9 /* Different than TWL4030's
+ one */
+
+/* subchip/slave 3 - POWER ID */
+#define TWL4030_BASEADD_BACKUP 0x0014
+#define TWL4030_BASEADD_INT 0x002E
+#define TWL4030_BASEADD_PM_MASTER 0x0036
+#define TWL4030_BASEADD_PM_RECEIVER 0x005B
+#define TWL4030_BASEADD_RTC 0x001C
+#define TWL4030_BASEADD_SECURED_REG 0x0000
+
+/* Triton Core internal information (END) */
+
+
+/* Few power values */
+#define R_CFG_BOOT 0x05
+#define R_PROTECT_KEY 0x0E
+
+/* access control values for R_PROTECT_KEY */
+#define KEY_UNLOCK1 0xce
+#define KEY_UNLOCK2 0xec
+#define KEY_LOCK 0x00
+
+/* some fields in R_CFG_BOOT */
+#define HFCLK_FREQ_19p2_MHZ (1 << 0)
+#define HFCLK_FREQ_26_MHZ (2 << 0)
+#define HFCLK_FREQ_38p4_MHZ (3 << 0)
+#define HIGH_PERF_SQ (1 << 3)
+#define CK32K_LOWPWR_EN (1 << 7)
+
+
+/* chip-specific feature flags, for i2c_device_id.driver_data */
+#define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */
+#define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */
+#define TWL5031 BIT(2) /* twl5031 has different registers */
+
+/*----------------------------------------------------------------------*/
+
+/* is driver active, bound to a chip? */
+static bool inuse;
+
+/* Structure for each TWL4030 Slave */
+struct twl4030_client {
+ struct i2c_client *client;
+ u8 address;
+
+ /* max numb of i2c_msg required is for read =2 */
+ struct i2c_msg xfer_msg[2];
+
+ /* To lock access to xfer_msg */
+ struct mutex xfer_lock;
+};
+
+static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES];
+
+
+/* mapping the module id to slave id and base address */
+struct twl4030mapping {
+ unsigned char sid; /* Slave ID */
+ unsigned char base; /* base address */
+};
+
+static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
+ /*
+ * NOTE: don't change this table without updating the
+ * <linux/i2c/twl4030.h> defines for TWL4030_MODULE_*
+ * so they continue to match the order in this table.
+ */
+
+ { 0, TWL4030_BASEADD_USB },
+
+ { 1, TWL4030_BASEADD_AUDIO_VOICE },
+ { 1, TWL4030_BASEADD_GPIO },
+ { 1, TWL4030_BASEADD_INTBR },
+ { 1, TWL4030_BASEADD_PIH },
+ { 1, TWL4030_BASEADD_TEST },
+
+ { 2, TWL4030_BASEADD_KEYPAD },
+ { 2, TWL4030_BASEADD_MADC },
+ { 2, TWL4030_BASEADD_INTERRUPTS },
+ { 2, TWL4030_BASEADD_LED },
+ { 2, TWL4030_BASEADD_MAIN_CHARGE },
+ { 2, TWL4030_BASEADD_PRECHARGE },
+ { 2, TWL4030_BASEADD_PWM0 },
+ { 2, TWL4030_BASEADD_PWM1 },
+ { 2, TWL4030_BASEADD_PWMA },
+ { 2, TWL4030_BASEADD_PWMB },
+ { 2, TWL5031_BASEADD_ACCESSORY },
+ { 2, TWL5031_BASEADD_INTERRUPTS },
+
+ { 3, TWL4030_BASEADD_BACKUP },
+ { 3, TWL4030_BASEADD_INT },
+ { 3, TWL4030_BASEADD_PM_MASTER },
+ { 3, TWL4030_BASEADD_PM_RECEIVER },
+ { 3, TWL4030_BASEADD_RTC },
+ { 3, TWL4030_BASEADD_SECURED_REG },
+};
+
+/*----------------------------------------------------------------------*/
+
+/* Exported Functions */
+
+/**
+ * twl4030_i2c_write - Writes a n bit register in TWL4030
+ * @mod_no: module number
+ * @value: an array of num_bytes+1 containing data to write
+ * @reg: register address (just offset will do)
+ * @num_bytes: number of bytes to transfer
+ *
+ * IMPORTANT: for 'value' parameter: Allocate value num_bytes+1 and
+ * valid data starts at Offset 1.
+ *
+ * Returns the result of operation - 0 is success
+ */
+int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
+{
+ int ret;
+ int sid;
+ struct twl4030_client *twl;
+ struct i2c_msg *msg;
+
+ if (unlikely(mod_no > TWL4030_MODULE_LAST)) {
+ pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
+ return -EPERM;
+ }
+ sid = twl4030_map[mod_no].sid;
+ twl = &twl4030_modules[sid];
+
+ if (unlikely(!inuse)) {
+ pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
+ return -EPERM;
+ }
+ mutex_lock(&twl->xfer_lock);
+ /*
+ * [MSG1]: fill the register address data
+ * fill the data Tx buffer
+ */
+ msg = &twl->xfer_msg[0];
+ msg->addr = twl->address;
+ msg->len = num_bytes + 1;
+ msg->flags = 0;
+ msg->buf = value;
+ /* over write the first byte of buffer with the register address */
+ *value = twl4030_map[mod_no].base + reg;
+ ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 1);
+ mutex_unlock(&twl->xfer_lock);
+
+ /* i2c_transfer returns number of messages transferred */
+ if (ret != 1) {
+ pr_err("%s: i2c_write failed to transfer all messages\n",
+ DRIVER_NAME);
+ if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+ } else {
+ return 0;
+ }
+}
+EXPORT_SYMBOL(twl4030_i2c_write);
+
+/**
+ * twl4030_i2c_read - Reads a n bit register in TWL4030
+ * @mod_no: module number
+ * @value: an array of num_bytes containing data to be read
+ * @reg: register address (just offset will do)
+ * @num_bytes: number of bytes to transfer
+ *
+ * Returns result of operation - num_bytes is success else failure.
+ */
+int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
+{
+ int ret;
+ u8 val;
+ int sid;
+ struct twl4030_client *twl;
+ struct i2c_msg *msg;
+
+ if (unlikely(mod_no > TWL4030_MODULE_LAST)) {
+ pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
+ return -EPERM;
+ }
+ sid = twl4030_map[mod_no].sid;
+ twl = &twl4030_modules[sid];
+
+ if (unlikely(!inuse)) {
+ pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
+ return -EPERM;
+ }
+ mutex_lock(&twl->xfer_lock);
+ /* [MSG1] fill the register address data */
+ msg = &twl->xfer_msg[0];
+ msg->addr = twl->address;
+ msg->len = 1;
+ msg->flags = 0; /* Read the register value */
+ val = twl4030_map[mod_no].base + reg;
+ msg->buf = &val;
+ /* [MSG2] fill the data rx buffer */
+ msg = &twl->xfer_msg[1];
+ msg->addr = twl->address;
+ msg->flags = I2C_M_RD; /* Read the register value */
+ msg->len = num_bytes; /* only n bytes */
+ msg->buf = value;
+ ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 2);
+ mutex_unlock(&twl->xfer_lock);
+
+ /* i2c_transfer returns number of messages transferred */
+ if (ret != 2) {
+ pr_err("%s: i2c_read failed to transfer all messages\n",
+ DRIVER_NAME);
+ if (ret < 0)
+ return ret;
+ else
+ return -EIO;
+ } else {
+ return 0;
+ }
+}
+EXPORT_SYMBOL(twl4030_i2c_read);
+
+/**
+ * twl4030_i2c_write_u8 - Writes a 8 bit register in TWL4030
+ * @mod_no: module number
+ * @value: the value to be written 8 bit
+ * @reg: register address (just offset will do)
+ *
+ * Returns result of operation - 0 is success
+ */
+int twl4030_i2c_write_u8(u8 mod_no, u8 value, u8 reg)
+{
+
+ /* 2 bytes offset 1 contains the data offset 0 is used by i2c_write */
+ u8 temp_buffer[2] = { 0 };
+ /* offset 1 contains the data */
+ temp_buffer[1] = value;
+ return twl4030_i2c_write(mod_no, temp_buffer, reg, 1);
+}
+EXPORT_SYMBOL(twl4030_i2c_write_u8);
+
+/**
+ * twl4030_i2c_read_u8 - Reads a 8 bit register from TWL4030
+ * @mod_no: module number
+ * @value: the value read 8 bit
+ * @reg: register address (just offset will do)
+ *
+ * Returns result of operation - 0 is success
+ */
+int twl4030_i2c_read_u8(u8 mod_no, u8 *value, u8 reg)
+{
+ return twl4030_i2c_read(mod_no, value, reg, 1);
+}
+EXPORT_SYMBOL(twl4030_i2c_read_u8);
+
+/*----------------------------------------------------------------------*/
+
+static struct device *
+add_numbered_child(unsigned chip, const char *name, int num,
+ void *pdata, unsigned pdata_len,
+ bool can_wakeup, int irq0, int irq1)
+{
+ struct platform_device *pdev;
+ struct twl4030_client *twl = &twl4030_modules[chip];
+ int status;
+
+ pdev = platform_device_alloc(name, num);
+ if (!pdev) {
+ dev_dbg(&twl->client->dev, "can't alloc dev\n");
+ status = -ENOMEM;
+ goto err;
+ }
+
+ device_init_wakeup(&pdev->dev, can_wakeup);
+ pdev->dev.parent = &twl->client->dev;
+
+ if (pdata) {
+ status = platform_device_add_data(pdev, pdata, pdata_len);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "can't add platform_data\n");
+ goto err;
+ }
+ }
+
+ if (irq0) {
+ struct resource r[2] = {
+ { .start = irq0, .flags = IORESOURCE_IRQ, },
+ { .start = irq1, .flags = IORESOURCE_IRQ, },
+ };
+
+ status = platform_device_add_resources(pdev, r, irq1 ? 2 : 1);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "can't add irqs\n");
+ goto err;
+ }
+ }
+
+ status = platform_device_add(pdev);
+
+err:
+ if (status < 0) {
+ platform_device_put(pdev);
+ dev_err(&twl->client->dev, "can't add %s dev\n", name);
+ return ERR_PTR(status);
+ }
+ return &pdev->dev;
+}
+
+static inline struct device *add_child(unsigned chip, const char *name,
+ void *pdata, unsigned pdata_len,
+ bool can_wakeup, int irq0, int irq1)
+{
+ return add_numbered_child(chip, name, -1, pdata, pdata_len,
+ can_wakeup, irq0, irq1);
+}
+
+static struct device *
+add_regulator_linked(int num, struct regulator_init_data *pdata,
+ struct regulator_consumer_supply *consumers,
+ unsigned num_consumers)
+{
+ /* regulator framework demands init_data ... */
+ if (!pdata)
+ return NULL;
+
+ if (consumers) {
+ pdata->consumer_supplies = consumers;
+ pdata->num_consumer_supplies = num_consumers;
+ }
+
+ /* NOTE: we currently ignore regulator IRQs, e.g. for short circuits */
+ return add_numbered_child(3, "twl4030_reg", num,
+ pdata, sizeof(*pdata), false, 0, 0);
+}
+
+static struct device *
+add_regulator(int num, struct regulator_init_data *pdata)
+{
+ return add_regulator_linked(num, pdata, NULL, 0);
+}
+
+/*
+ * NOTE: We know the first 8 IRQs after pdata->base_irq are
+ * for the PIH, and the next are for the PWR_INT SIH, since
+ * that's how twl_init_irq() sets things up.
+ */
+
+static int
+add_children(struct twl4030_platform_data *pdata, unsigned long features)
+{
+ struct device *child;
+
+ if (twl_has_bci() && pdata->bci &&
+ !(features & (TPS_SUBSET | TWL5031))) {
+ child = add_child(3, "twl4030_bci",
+ pdata->bci, sizeof(*pdata->bci),
+ false,
+ /* irq0 = CHG_PRES, irq1 = BCI */
+ pdata->irq_base + 8 + 1, pdata->irq_base + 2);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ if (twl_has_gpio() && pdata->gpio) {
+ child = add_child(1, "twl4030_gpio",
+ pdata->gpio, sizeof(*pdata->gpio),
+ false, pdata->irq_base + 0, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ if (twl_has_keypad() && pdata->keypad) {
+ child = add_child(2, "twl4030_keypad",
+ pdata->keypad, sizeof(*pdata->keypad),
+ true, pdata->irq_base + 1, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ if (twl_has_madc() && pdata->madc) {
+ child = add_child(2, "twl4030_madc",
+ pdata->madc, sizeof(*pdata->madc),
+ true, pdata->irq_base + 3, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ if (twl_has_rtc()) {
+ /*
+ * REVISIT platform_data here currently might expose the
+ * "msecure" line ... but for now we just expect board
+ * setup to tell the chip "it's always ok to SET_TIME".
+ * Eventually, Linux might become more aware of such
+ * HW security concerns, and "least privilege".
+ */
+ child = add_child(3, "twl4030_rtc",
+ NULL, 0,
+ true, pdata->irq_base + 8 + 3, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ if (twl_has_usb() && pdata->usb) {
+
+ static struct regulator_consumer_supply usb1v5 = {
+ .supply = "usb1v5",
+ };
+ static struct regulator_consumer_supply usb1v8 = {
+ .supply = "usb1v8",
+ };
+ static struct regulator_consumer_supply usb3v1 = {
+ .supply = "usb3v1",
+ };
+
+ /* First add the regulators so that they can be used by transceiver */
+ if (twl_has_regulator()) {
+ /* this is a template that gets copied */
+ struct regulator_init_data usb_fixed = {
+ .constraints.valid_modes_mask =
+ REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .constraints.valid_ops_mask =
+ REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ };
+
+ child = add_regulator_linked(TWL4030_REG_VUSB1V5,
+ &usb_fixed, &usb1v5, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator_linked(TWL4030_REG_VUSB1V8,
+ &usb_fixed, &usb1v8, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator_linked(TWL4030_REG_VUSB3V1,
+ &usb_fixed, &usb3v1, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ }
+
+ child = add_child(0, "twl4030_usb",
+ pdata->usb, sizeof(*pdata->usb),
+ true,
+ /* irq0 = USB_PRES, irq1 = USB */
+ pdata->irq_base + 8 + 2, pdata->irq_base + 4);
+
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ /* we need to connect regulators to this transceiver */
+ if (twl_has_regulator() && child) {
+ usb1v5.dev = child;
+ usb1v8.dev = child;
+ usb3v1.dev = child;
+ }
+ }
+
+ if (twl_has_watchdog()) {
+ child = add_child(0, "twl4030_wdt", NULL, 0, false, 0, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ if (twl_has_pwrbutton()) {
+ child = add_child(1, "twl4030_pwrbutton",
+ NULL, 0, true, pdata->irq_base + 8 + 0, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ if (twl_has_codec() && pdata->codec) {
+ child = add_child(1, "twl4030_codec",
+ pdata->codec, sizeof(*pdata->codec),
+ false, 0, 0);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ if (twl_has_regulator()) {
+ child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VIO, pdata->vio);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VDD1, pdata->vdd1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VDD2, pdata->vdd2);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VMMC1, pdata->vmmc1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VDAC, pdata->vdac);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator((features & TWL4030_VAUX2)
+ ? TWL4030_REG_VAUX2_4030
+ : TWL4030_REG_VAUX2,
+ pdata->vaux2);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VINTANA1, pdata->vintana1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VINTANA2, pdata->vintana2);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VINTDIG, pdata->vintdig);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ /* maybe add LDOs that are omitted on cost-reduced parts */
+ if (twl_has_regulator() && !(features & TPS_SUBSET)) {
+ child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VMMC2, pdata->vmmc2);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VSIM, pdata->vsim);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VAUX1, pdata->vaux1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VAUX3, pdata->vaux3);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator(TWL4030_REG_VAUX4, pdata->vaux4);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ }
+
+ return 0;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * These three functions initialize the on-chip clock framework,
+ * letting it generate the right frequencies for USB, MADC, and
+ * other purposes.
+ */
+static inline int __init protect_pm_master(void)
+{
+ int e = 0;
+
+ e = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_LOCK,
+ R_PROTECT_KEY);
+ return e;
+}
+
+static inline int __init unprotect_pm_master(void)
+{
+ int e = 0;
+
+ e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK1,
+ R_PROTECT_KEY);
+ e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK2,
+ R_PROTECT_KEY);
+ return e;
+}
+
+static void clocks_init(struct device *dev,
+ struct twl4030_clock_init_data *clock)
+{
+ int e = 0;
+ struct clk *osc;
+ u32 rate;
+ u8 ctrl = HFCLK_FREQ_26_MHZ;
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+ if (cpu_is_omap2430())
+ osc = clk_get(dev, "osc_ck");
+ else
+ osc = clk_get(dev, "osc_sys_ck");
+
+ if (IS_ERR(osc)) {
+ printk(KERN_WARNING "Skipping twl4030 internal clock init and "
+ "using bootloader value (unknown osc rate)\n");
+ return;
+ }
+
+ rate = clk_get_rate(osc);
+ clk_put(osc);
+
+#else
+ /* REVISIT for non-OMAP systems, pass the clock rate from
+ * board init code, using platform_data.
+ */
+ osc = ERR_PTR(-EIO);
+
+ printk(KERN_WARNING "Skipping twl4030 internal clock init and "
+ "using bootloader value (unknown osc rate)\n");
+
+ return;
+#endif
+
+ switch (rate) {
+ case 19200000:
+ ctrl = HFCLK_FREQ_19p2_MHZ;
+ break;
+ case 26000000:
+ ctrl = HFCLK_FREQ_26_MHZ;
+ break;
+ case 38400000:
+ ctrl = HFCLK_FREQ_38p4_MHZ;
+ break;
+ }
+
+ ctrl |= HIGH_PERF_SQ;
+ if (clock && clock->ck32k_lowpwr_enable)
+ ctrl |= CK32K_LOWPWR_EN;
+
+ e |= unprotect_pm_master();
+ /* effect->MADC+USB ck en */
+ e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
+ e |= protect_pm_master();
+
+ if (e < 0)
+ pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e);
+}
+
+/*----------------------------------------------------------------------*/
+
+int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
+int twl_exit_irq(void);
+int twl_init_chip_irq(const char *chip);
+
+static int twl4030_remove(struct i2c_client *client)
+{
+ unsigned i;
+ int status;
+
+ status = twl_exit_irq();
+ if (status < 0)
+ return status;
+
+ for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
+ struct twl4030_client *twl = &twl4030_modules[i];
+
+ if (twl->client && twl->client != client)
+ i2c_unregister_device(twl->client);
+ twl4030_modules[i].client = NULL;
+ }
+ inuse = false;
+ return 0;
+}
+
+/* NOTE: this driver only handles a single twl4030/tps659x0 chip */
+static int __init
+twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ int status;
+ unsigned i;
+ struct twl4030_platform_data *pdata = client->dev.platform_data;
+
+ if (!pdata) {
+ dev_dbg(&client->dev, "no platform data?\n");
+ return -EINVAL;
+ }
+
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
+ dev_dbg(&client->dev, "can't talk I2C?\n");
+ return -EIO;
+ }
+
+ if (inuse) {
+ dev_dbg(&client->dev, "driver is already in use\n");
+ return -EBUSY;
+ }
+
+ for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
+ struct twl4030_client *twl = &twl4030_modules[i];
+
+ twl->address = client->addr + i;
+ if (i == 0)
+ twl->client = client;
+ else {
+ twl->client = i2c_new_dummy(client->adapter,
+ twl->address);
+ if (!twl->client) {
+ dev_err(&client->dev,
+ "can't attach client %d\n", i);
+ status = -ENOMEM;
+ goto fail;
+ }
+ }
+ mutex_init(&twl->xfer_lock);
+ }
+ inuse = true;
+
+ /* setup clock framework */
+ clocks_init(&client->dev, pdata->clock);
+
+ /* load power event scripts */
+ if (twl_has_power() && pdata->power)
+ twl4030_power_init(pdata->power);
+
+ /* Maybe init the T2 Interrupt subsystem */
+ if (client->irq
+ && pdata->irq_base
+ && pdata->irq_end > pdata->irq_base) {
+ twl_init_chip_irq(id->name);
+ status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
+ if (status < 0)
+ goto fail;
+ }
+
+ status = add_children(pdata, id->driver_data);
+fail:
+ if (status < 0)
+ twl4030_remove(client);
+ return status;
+}
+
+static const struct i2c_device_id twl4030_ids[] = {
+ { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */
+ { "twl5030", 0 }, /* T2 updated */
+ { "twl5031", TWL5031 }, /* TWL5030 updated */
+ { "tps65950", 0 }, /* catalog version of twl5030 */
+ { "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */
+ { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */
+ { /* end of list */ },
+};
+MODULE_DEVICE_TABLE(i2c, twl4030_ids);
+
+/* One Client Driver , 4 Clients */
+static struct i2c_driver twl4030_driver = {
+ .driver.name = DRIVER_NAME,
+ .id_table = twl4030_ids,
+ .probe = twl4030_probe,
+ .remove = twl4030_remove,
+};
+
+static int __init twl4030_init(void)
+{
+ return i2c_add_driver(&twl4030_driver);
+}
+subsys_initcall(twl4030_init);
+
+static void __exit twl4030_exit(void)
+{
+ i2c_del_driver(&twl4030_driver);
+}
+module_exit(twl4030_exit);
+
+MODULE_AUTHOR("Texas Instruments, Inc.");
+MODULE_DESCRIPTION("I2C Core interface for TWL4030");
+MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * twl4030_core.c - driver for TWL4030/TPS659x0 PM and audio CODEC devices
- *
- * Copyright (C) 2005-2006 Texas Instruments, Inc.
- *
- * Modifications to defer interrupt handling to a kernel thread:
- * Copyright (C) 2006 MontaVista Software, Inc.
- *
- * Based on tlv320aic23.c:
- * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
- *
- * Code cleanup and modifications to IRQ handler.
- * by syed khasim <x0khasim@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <linux/regulator/machine.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c/twl4030.h>
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-#include <plat/cpu.h>
-#endif
-
-/*
- * The TWL4030 "Triton 2" is one of a family of a multi-function "Power
- * Management and System Companion Device" chips originally designed for
- * use in OMAP2 and OMAP 3 based systems. Its control interfaces use I2C,
- * often at around 3 Mbit/sec, including for interrupt handling.
- *
- * This driver core provides genirq support for the interrupts emitted,
- * by the various modules, and exports register access primitives.
- *
- * FIXME this driver currently requires use of the first interrupt line
- * (and associated registers).
- */
-
-#define DRIVER_NAME "twl4030"
-
-#if defined(CONFIG_TWL4030_BCI_BATTERY) || \
- defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
-#define twl_has_bci() true
-#else
-#define twl_has_bci() false
-#endif
-
-#if defined(CONFIG_KEYBOARD_TWL4030) || defined(CONFIG_KEYBOARD_TWL4030_MODULE)
-#define twl_has_keypad() true
-#else
-#define twl_has_keypad() false
-#endif
-
-#if defined(CONFIG_GPIO_TWL4030) || defined(CONFIG_GPIO_TWL4030_MODULE)
-#define twl_has_gpio() true
-#else
-#define twl_has_gpio() false
-#endif
-
-#if defined(CONFIG_REGULATOR_TWL4030) \
- || defined(CONFIG_REGULATOR_TWL4030_MODULE)
-#define twl_has_regulator() true
-#else
-#define twl_has_regulator() false
-#endif
-
-#if defined(CONFIG_TWL4030_MADC) || defined(CONFIG_TWL4030_MADC_MODULE)
-#define twl_has_madc() true
-#else
-#define twl_has_madc() false
-#endif
-
-#ifdef CONFIG_TWL4030_POWER
-#define twl_has_power() true
-#else
-#define twl_has_power() false
-#endif
-
-#if defined(CONFIG_RTC_DRV_TWL4030) || defined(CONFIG_RTC_DRV_TWL4030_MODULE)
-#define twl_has_rtc() true
-#else
-#define twl_has_rtc() false
-#endif
-
-#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE)
-#define twl_has_usb() true
-#else
-#define twl_has_usb() false
-#endif
-
-#if defined(CONFIG_TWL4030_WATCHDOG) || \
- defined(CONFIG_TWL4030_WATCHDOG_MODULE)
-#define twl_has_watchdog() true
-#else
-#define twl_has_watchdog() false
-#endif
-
-#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE)
-#define twl_has_codec() true
-#else
-#define twl_has_codec() false
-#endif
-
-/* Triton Core internal information (BEGIN) */
-
-/* Last - for index max*/
-#define TWL4030_MODULE_LAST TWL4030_MODULE_SECURED_REG
-
-#define TWL4030_NUM_SLAVES 4
-
-#if defined(CONFIG_INPUT_TWL4030_PWRBUTTON) \
- || defined(CONFIG_INPUT_TWL4030_PWBUTTON_MODULE)
-#define twl_has_pwrbutton() true
-#else
-#define twl_has_pwrbutton() false
-#endif
-
-/* Base Address defns for twl4030_map[] */
-
-/* subchip/slave 0 - USB ID */
-#define TWL4030_BASEADD_USB 0x0000
-
-/* subchip/slave 1 - AUD ID */
-#define TWL4030_BASEADD_AUDIO_VOICE 0x0000
-#define TWL4030_BASEADD_GPIO 0x0098
-#define TWL4030_BASEADD_INTBR 0x0085
-#define TWL4030_BASEADD_PIH 0x0080
-#define TWL4030_BASEADD_TEST 0x004C
-
-/* subchip/slave 2 - AUX ID */
-#define TWL4030_BASEADD_INTERRUPTS 0x00B9
-#define TWL4030_BASEADD_LED 0x00EE
-#define TWL4030_BASEADD_MADC 0x0000
-#define TWL4030_BASEADD_MAIN_CHARGE 0x0074
-#define TWL4030_BASEADD_PRECHARGE 0x00AA
-#define TWL4030_BASEADD_PWM0 0x00F8
-#define TWL4030_BASEADD_PWM1 0x00FB
-#define TWL4030_BASEADD_PWMA 0x00EF
-#define TWL4030_BASEADD_PWMB 0x00F1
-#define TWL4030_BASEADD_KEYPAD 0x00D2
-
-#define TWL5031_BASEADD_ACCESSORY 0x0074 /* Replaces Main Charge */
-#define TWL5031_BASEADD_INTERRUPTS 0x00B9 /* Different than TWL4030's
- one */
-
-/* subchip/slave 3 - POWER ID */
-#define TWL4030_BASEADD_BACKUP 0x0014
-#define TWL4030_BASEADD_INT 0x002E
-#define TWL4030_BASEADD_PM_MASTER 0x0036
-#define TWL4030_BASEADD_PM_RECEIVER 0x005B
-#define TWL4030_BASEADD_RTC 0x001C
-#define TWL4030_BASEADD_SECURED_REG 0x0000
-
-/* Triton Core internal information (END) */
-
-
-/* Few power values */
-#define R_CFG_BOOT 0x05
-#define R_PROTECT_KEY 0x0E
-
-/* access control values for R_PROTECT_KEY */
-#define KEY_UNLOCK1 0xce
-#define KEY_UNLOCK2 0xec
-#define KEY_LOCK 0x00
-
-/* some fields in R_CFG_BOOT */
-#define HFCLK_FREQ_19p2_MHZ (1 << 0)
-#define HFCLK_FREQ_26_MHZ (2 << 0)
-#define HFCLK_FREQ_38p4_MHZ (3 << 0)
-#define HIGH_PERF_SQ (1 << 3)
-#define CK32K_LOWPWR_EN (1 << 7)
-
-
-/* chip-specific feature flags, for i2c_device_id.driver_data */
-#define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */
-#define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */
-#define TWL5031 BIT(2) /* twl5031 has different registers */
-
-/*----------------------------------------------------------------------*/
-
-/* is driver active, bound to a chip? */
-static bool inuse;
-
-/* Structure for each TWL4030 Slave */
-struct twl4030_client {
- struct i2c_client *client;
- u8 address;
-
- /* max numb of i2c_msg required is for read =2 */
- struct i2c_msg xfer_msg[2];
-
- /* To lock access to xfer_msg */
- struct mutex xfer_lock;
-};
-
-static struct twl4030_client twl4030_modules[TWL4030_NUM_SLAVES];
-
-
-/* mapping the module id to slave id and base address */
-struct twl4030mapping {
- unsigned char sid; /* Slave ID */
- unsigned char base; /* base address */
-};
-
-static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
- /*
- * NOTE: don't change this table without updating the
- * <linux/i2c/twl4030.h> defines for TWL4030_MODULE_*
- * so they continue to match the order in this table.
- */
-
- { 0, TWL4030_BASEADD_USB },
-
- { 1, TWL4030_BASEADD_AUDIO_VOICE },
- { 1, TWL4030_BASEADD_GPIO },
- { 1, TWL4030_BASEADD_INTBR },
- { 1, TWL4030_BASEADD_PIH },
- { 1, TWL4030_BASEADD_TEST },
-
- { 2, TWL4030_BASEADD_KEYPAD },
- { 2, TWL4030_BASEADD_MADC },
- { 2, TWL4030_BASEADD_INTERRUPTS },
- { 2, TWL4030_BASEADD_LED },
- { 2, TWL4030_BASEADD_MAIN_CHARGE },
- { 2, TWL4030_BASEADD_PRECHARGE },
- { 2, TWL4030_BASEADD_PWM0 },
- { 2, TWL4030_BASEADD_PWM1 },
- { 2, TWL4030_BASEADD_PWMA },
- { 2, TWL4030_BASEADD_PWMB },
- { 2, TWL5031_BASEADD_ACCESSORY },
- { 2, TWL5031_BASEADD_INTERRUPTS },
-
- { 3, TWL4030_BASEADD_BACKUP },
- { 3, TWL4030_BASEADD_INT },
- { 3, TWL4030_BASEADD_PM_MASTER },
- { 3, TWL4030_BASEADD_PM_RECEIVER },
- { 3, TWL4030_BASEADD_RTC },
- { 3, TWL4030_BASEADD_SECURED_REG },
-};
-
-/*----------------------------------------------------------------------*/
-
-/* Exported Functions */
-
-/**
- * twl4030_i2c_write - Writes a n bit register in TWL4030
- * @mod_no: module number
- * @value: an array of num_bytes+1 containing data to write
- * @reg: register address (just offset will do)
- * @num_bytes: number of bytes to transfer
- *
- * IMPORTANT: for 'value' parameter: Allocate value num_bytes+1 and
- * valid data starts at Offset 1.
- *
- * Returns the result of operation - 0 is success
- */
-int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
-{
- int ret;
- int sid;
- struct twl4030_client *twl;
- struct i2c_msg *msg;
-
- if (unlikely(mod_no > TWL4030_MODULE_LAST)) {
- pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
- return -EPERM;
- }
- sid = twl4030_map[mod_no].sid;
- twl = &twl4030_modules[sid];
-
- if (unlikely(!inuse)) {
- pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
- return -EPERM;
- }
- mutex_lock(&twl->xfer_lock);
- /*
- * [MSG1]: fill the register address data
- * fill the data Tx buffer
- */
- msg = &twl->xfer_msg[0];
- msg->addr = twl->address;
- msg->len = num_bytes + 1;
- msg->flags = 0;
- msg->buf = value;
- /* over write the first byte of buffer with the register address */
- *value = twl4030_map[mod_no].base + reg;
- ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 1);
- mutex_unlock(&twl->xfer_lock);
-
- /* i2c_transfer returns number of messages transferred */
- if (ret != 1) {
- pr_err("%s: i2c_write failed to transfer all messages\n",
- DRIVER_NAME);
- if (ret < 0)
- return ret;
- else
- return -EIO;
- } else {
- return 0;
- }
-}
-EXPORT_SYMBOL(twl4030_i2c_write);
-
-/**
- * twl4030_i2c_read - Reads a n bit register in TWL4030
- * @mod_no: module number
- * @value: an array of num_bytes containing data to be read
- * @reg: register address (just offset will do)
- * @num_bytes: number of bytes to transfer
- *
- * Returns result of operation - num_bytes is success else failure.
- */
-int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes)
-{
- int ret;
- u8 val;
- int sid;
- struct twl4030_client *twl;
- struct i2c_msg *msg;
-
- if (unlikely(mod_no > TWL4030_MODULE_LAST)) {
- pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no);
- return -EPERM;
- }
- sid = twl4030_map[mod_no].sid;
- twl = &twl4030_modules[sid];
-
- if (unlikely(!inuse)) {
- pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid);
- return -EPERM;
- }
- mutex_lock(&twl->xfer_lock);
- /* [MSG1] fill the register address data */
- msg = &twl->xfer_msg[0];
- msg->addr = twl->address;
- msg->len = 1;
- msg->flags = 0; /* Read the register value */
- val = twl4030_map[mod_no].base + reg;
- msg->buf = &val;
- /* [MSG2] fill the data rx buffer */
- msg = &twl->xfer_msg[1];
- msg->addr = twl->address;
- msg->flags = I2C_M_RD; /* Read the register value */
- msg->len = num_bytes; /* only n bytes */
- msg->buf = value;
- ret = i2c_transfer(twl->client->adapter, twl->xfer_msg, 2);
- mutex_unlock(&twl->xfer_lock);
-
- /* i2c_transfer returns number of messages transferred */
- if (ret != 2) {
- pr_err("%s: i2c_read failed to transfer all messages\n",
- DRIVER_NAME);
- if (ret < 0)
- return ret;
- else
- return -EIO;
- } else {
- return 0;
- }
-}
-EXPORT_SYMBOL(twl4030_i2c_read);
-
-/**
- * twl4030_i2c_write_u8 - Writes a 8 bit register in TWL4030
- * @mod_no: module number
- * @value: the value to be written 8 bit
- * @reg: register address (just offset will do)
- *
- * Returns result of operation - 0 is success
- */
-int twl4030_i2c_write_u8(u8 mod_no, u8 value, u8 reg)
-{
-
- /* 2 bytes offset 1 contains the data offset 0 is used by i2c_write */
- u8 temp_buffer[2] = { 0 };
- /* offset 1 contains the data */
- temp_buffer[1] = value;
- return twl4030_i2c_write(mod_no, temp_buffer, reg, 1);
-}
-EXPORT_SYMBOL(twl4030_i2c_write_u8);
-
-/**
- * twl4030_i2c_read_u8 - Reads a 8 bit register from TWL4030
- * @mod_no: module number
- * @value: the value read 8 bit
- * @reg: register address (just offset will do)
- *
- * Returns result of operation - 0 is success
- */
-int twl4030_i2c_read_u8(u8 mod_no, u8 *value, u8 reg)
-{
- return twl4030_i2c_read(mod_no, value, reg, 1);
-}
-EXPORT_SYMBOL(twl4030_i2c_read_u8);
-
-/*----------------------------------------------------------------------*/
-
-static struct device *
-add_numbered_child(unsigned chip, const char *name, int num,
- void *pdata, unsigned pdata_len,
- bool can_wakeup, int irq0, int irq1)
-{
- struct platform_device *pdev;
- struct twl4030_client *twl = &twl4030_modules[chip];
- int status;
-
- pdev = platform_device_alloc(name, num);
- if (!pdev) {
- dev_dbg(&twl->client->dev, "can't alloc dev\n");
- status = -ENOMEM;
- goto err;
- }
-
- device_init_wakeup(&pdev->dev, can_wakeup);
- pdev->dev.parent = &twl->client->dev;
-
- if (pdata) {
- status = platform_device_add_data(pdev, pdata, pdata_len);
- if (status < 0) {
- dev_dbg(&pdev->dev, "can't add platform_data\n");
- goto err;
- }
- }
-
- if (irq0) {
- struct resource r[2] = {
- { .start = irq0, .flags = IORESOURCE_IRQ, },
- { .start = irq1, .flags = IORESOURCE_IRQ, },
- };
-
- status = platform_device_add_resources(pdev, r, irq1 ? 2 : 1);
- if (status < 0) {
- dev_dbg(&pdev->dev, "can't add irqs\n");
- goto err;
- }
- }
-
- status = platform_device_add(pdev);
-
-err:
- if (status < 0) {
- platform_device_put(pdev);
- dev_err(&twl->client->dev, "can't add %s dev\n", name);
- return ERR_PTR(status);
- }
- return &pdev->dev;
-}
-
-static inline struct device *add_child(unsigned chip, const char *name,
- void *pdata, unsigned pdata_len,
- bool can_wakeup, int irq0, int irq1)
-{
- return add_numbered_child(chip, name, -1, pdata, pdata_len,
- can_wakeup, irq0, irq1);
-}
-
-static struct device *
-add_regulator_linked(int num, struct regulator_init_data *pdata,
- struct regulator_consumer_supply *consumers,
- unsigned num_consumers)
-{
- /* regulator framework demands init_data ... */
- if (!pdata)
- return NULL;
-
- if (consumers) {
- pdata->consumer_supplies = consumers;
- pdata->num_consumer_supplies = num_consumers;
- }
-
- /* NOTE: we currently ignore regulator IRQs, e.g. for short circuits */
- return add_numbered_child(3, "twl4030_reg", num,
- pdata, sizeof(*pdata), false, 0, 0);
-}
-
-static struct device *
-add_regulator(int num, struct regulator_init_data *pdata)
-{
- return add_regulator_linked(num, pdata, NULL, 0);
-}
-
-/*
- * NOTE: We know the first 8 IRQs after pdata->base_irq are
- * for the PIH, and the next are for the PWR_INT SIH, since
- * that's how twl_init_irq() sets things up.
- */
-
-static int
-add_children(struct twl4030_platform_data *pdata, unsigned long features)
-{
- struct device *child;
-
- if (twl_has_bci() && pdata->bci &&
- !(features & (TPS_SUBSET | TWL5031))) {
- child = add_child(3, "twl4030_bci",
- pdata->bci, sizeof(*pdata->bci),
- false,
- /* irq0 = CHG_PRES, irq1 = BCI */
- pdata->irq_base + 8 + 1, pdata->irq_base + 2);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
- if (twl_has_gpio() && pdata->gpio) {
- child = add_child(1, "twl4030_gpio",
- pdata->gpio, sizeof(*pdata->gpio),
- false, pdata->irq_base + 0, 0);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
- if (twl_has_keypad() && pdata->keypad) {
- child = add_child(2, "twl4030_keypad",
- pdata->keypad, sizeof(*pdata->keypad),
- true, pdata->irq_base + 1, 0);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
- if (twl_has_madc() && pdata->madc) {
- child = add_child(2, "twl4030_madc",
- pdata->madc, sizeof(*pdata->madc),
- true, pdata->irq_base + 3, 0);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
- if (twl_has_rtc()) {
- /*
- * REVISIT platform_data here currently might expose the
- * "msecure" line ... but for now we just expect board
- * setup to tell the chip "it's always ok to SET_TIME".
- * Eventually, Linux might become more aware of such
- * HW security concerns, and "least privilege".
- */
- child = add_child(3, "twl4030_rtc",
- NULL, 0,
- true, pdata->irq_base + 8 + 3, 0);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
- if (twl_has_usb() && pdata->usb) {
-
- static struct regulator_consumer_supply usb1v5 = {
- .supply = "usb1v5",
- };
- static struct regulator_consumer_supply usb1v8 = {
- .supply = "usb1v8",
- };
- static struct regulator_consumer_supply usb3v1 = {
- .supply = "usb3v1",
- };
-
- /* First add the regulators so that they can be used by transceiver */
- if (twl_has_regulator()) {
- /* this is a template that gets copied */
- struct regulator_init_data usb_fixed = {
- .constraints.valid_modes_mask =
- REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .constraints.valid_ops_mask =
- REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- };
-
- child = add_regulator_linked(TWL4030_REG_VUSB1V5,
- &usb_fixed, &usb1v5, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator_linked(TWL4030_REG_VUSB1V8,
- &usb_fixed, &usb1v8, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator_linked(TWL4030_REG_VUSB3V1,
- &usb_fixed, &usb3v1, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- }
-
- child = add_child(0, "twl4030_usb",
- pdata->usb, sizeof(*pdata->usb),
- true,
- /* irq0 = USB_PRES, irq1 = USB */
- pdata->irq_base + 8 + 2, pdata->irq_base + 4);
-
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- /* we need to connect regulators to this transceiver */
- if (twl_has_regulator() && child) {
- usb1v5.dev = child;
- usb1v8.dev = child;
- usb3v1.dev = child;
- }
- }
-
- if (twl_has_watchdog()) {
- child = add_child(0, "twl4030_wdt", NULL, 0, false, 0, 0);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
- if (twl_has_pwrbutton()) {
- child = add_child(1, "twl4030_pwrbutton",
- NULL, 0, true, pdata->irq_base + 8 + 0, 0);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
- if (twl_has_codec() && pdata->codec) {
- child = add_child(1, "twl4030_codec",
- pdata->codec, sizeof(*pdata->codec),
- false, 0, 0);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
- if (twl_has_regulator()) {
- child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VIO, pdata->vio);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VDD1, pdata->vdd1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VDD2, pdata->vdd2);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VMMC1, pdata->vmmc1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VDAC, pdata->vdac);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator((features & TWL4030_VAUX2)
- ? TWL4030_REG_VAUX2_4030
- : TWL4030_REG_VAUX2,
- pdata->vaux2);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VINTANA1, pdata->vintana1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VINTANA2, pdata->vintana2);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VINTDIG, pdata->vintdig);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
- /* maybe add LDOs that are omitted on cost-reduced parts */
- if (twl_has_regulator() && !(features & TPS_SUBSET)) {
- child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VMMC2, pdata->vmmc2);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VSIM, pdata->vsim);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VAUX1, pdata->vaux1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VAUX3, pdata->vaux3);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator(TWL4030_REG_VAUX4, pdata->vaux4);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
- return 0;
-}
-
-/*----------------------------------------------------------------------*/
-
-/*
- * These three functions initialize the on-chip clock framework,
- * letting it generate the right frequencies for USB, MADC, and
- * other purposes.
- */
-static inline int __init protect_pm_master(void)
-{
- int e = 0;
-
- e = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_LOCK,
- R_PROTECT_KEY);
- return e;
-}
-
-static inline int __init unprotect_pm_master(void)
-{
- int e = 0;
-
- e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK1,
- R_PROTECT_KEY);
- e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_UNLOCK2,
- R_PROTECT_KEY);
- return e;
-}
-
-static void clocks_init(struct device *dev,
- struct twl4030_clock_init_data *clock)
-{
- int e = 0;
- struct clk *osc;
- u32 rate;
- u8 ctrl = HFCLK_FREQ_26_MHZ;
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- if (cpu_is_omap2430())
- osc = clk_get(dev, "osc_ck");
- else
- osc = clk_get(dev, "osc_sys_ck");
-
- if (IS_ERR(osc)) {
- printk(KERN_WARNING "Skipping twl4030 internal clock init and "
- "using bootloader value (unknown osc rate)\n");
- return;
- }
-
- rate = clk_get_rate(osc);
- clk_put(osc);
-
-#else
- /* REVISIT for non-OMAP systems, pass the clock rate from
- * board init code, using platform_data.
- */
- osc = ERR_PTR(-EIO);
-
- printk(KERN_WARNING "Skipping twl4030 internal clock init and "
- "using bootloader value (unknown osc rate)\n");
-
- return;
-#endif
-
- switch (rate) {
- case 19200000:
- ctrl = HFCLK_FREQ_19p2_MHZ;
- break;
- case 26000000:
- ctrl = HFCLK_FREQ_26_MHZ;
- break;
- case 38400000:
- ctrl = HFCLK_FREQ_38p4_MHZ;
- break;
- }
-
- ctrl |= HIGH_PERF_SQ;
- if (clock && clock->ck32k_lowpwr_enable)
- ctrl |= CK32K_LOWPWR_EN;
-
- e |= unprotect_pm_master();
- /* effect->MADC+USB ck en */
- e |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
- e |= protect_pm_master();
-
- if (e < 0)
- pr_err("%s: clock init err [%d]\n", DRIVER_NAME, e);
-}
-
-/*----------------------------------------------------------------------*/
-
-int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
-int twl_exit_irq(void);
-int twl_init_chip_irq(const char *chip);
-
-static int twl4030_remove(struct i2c_client *client)
-{
- unsigned i;
- int status;
-
- status = twl_exit_irq();
- if (status < 0)
- return status;
-
- for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
- struct twl4030_client *twl = &twl4030_modules[i];
-
- if (twl->client && twl->client != client)
- i2c_unregister_device(twl->client);
- twl4030_modules[i].client = NULL;
- }
- inuse = false;
- return 0;
-}
-
-/* NOTE: this driver only handles a single twl4030/tps659x0 chip */
-static int __init
-twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
- int status;
- unsigned i;
- struct twl4030_platform_data *pdata = client->dev.platform_data;
-
- if (!pdata) {
- dev_dbg(&client->dev, "no platform data?\n");
- return -EINVAL;
- }
-
- if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
- dev_dbg(&client->dev, "can't talk I2C?\n");
- return -EIO;
- }
-
- if (inuse) {
- dev_dbg(&client->dev, "driver is already in use\n");
- return -EBUSY;
- }
-
- for (i = 0; i < TWL4030_NUM_SLAVES; i++) {
- struct twl4030_client *twl = &twl4030_modules[i];
-
- twl->address = client->addr + i;
- if (i == 0)
- twl->client = client;
- else {
- twl->client = i2c_new_dummy(client->adapter,
- twl->address);
- if (!twl->client) {
- dev_err(&client->dev,
- "can't attach client %d\n", i);
- status = -ENOMEM;
- goto fail;
- }
- }
- mutex_init(&twl->xfer_lock);
- }
- inuse = true;
-
- /* setup clock framework */
- clocks_init(&client->dev, pdata->clock);
-
- /* load power event scripts */
- if (twl_has_power() && pdata->power)
- twl4030_power_init(pdata->power);
-
- /* Maybe init the T2 Interrupt subsystem */
- if (client->irq
- && pdata->irq_base
- && pdata->irq_end > pdata->irq_base) {
- twl_init_chip_irq(id->name);
- status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
- if (status < 0)
- goto fail;
- }
-
- status = add_children(pdata, id->driver_data);
-fail:
- if (status < 0)
- twl4030_remove(client);
- return status;
-}
-
-static const struct i2c_device_id twl4030_ids[] = {
- { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */
- { "twl5030", 0 }, /* T2 updated */
- { "twl5031", TWL5031 }, /* TWL5030 updated */
- { "tps65950", 0 }, /* catalog version of twl5030 */
- { "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */
- { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */
- { /* end of list */ },
-};
-MODULE_DEVICE_TABLE(i2c, twl4030_ids);
-
-/* One Client Driver , 4 Clients */
-static struct i2c_driver twl4030_driver = {
- .driver.name = DRIVER_NAME,
- .id_table = twl4030_ids,
- .probe = twl4030_probe,
- .remove = twl4030_remove,
-};
-
-static int __init twl4030_init(void)
-{
- return i2c_add_driver(&twl4030_driver);
-}
-subsys_initcall(twl4030_init);
-
-static void __exit twl4030_exit(void)
-{
- i2c_del_driver(&twl4030_driver);
-}
-module_exit(twl4030_exit);
-
-MODULE_AUTHOR("Texas Instruments, Inc.");
-MODULE_DESCRIPTION("I2C Core interface for TWL4030");
-MODULE_LICENSE("GPL");
#include <linux/irq.h>
#include <linux/kthread.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
/*
#include <linux/module.h>
#include <linux/pm.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
-obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
+obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
--- /dev/null
+/*
+ * twl4030-regulator.c -- support regulators in twl4030 family chips
+ *
+ * Copyright (C) 2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl.h>
+
+
+/*
+ * The TWL4030/TW5030/TPS659x0 family chips include power management, a
+ * USB OTG transceiver, an RTC, ADC, PWM, and lots more. Some versions
+ * include an audio codec, battery charger, and more voltage regulators.
+ * These chips are often used in OMAP-based systems.
+ *
+ * This driver implements software-based resource control for various
+ * voltage regulators. This is usually augmented with state machine
+ * based control.
+ */
+
+struct twlreg_info {
+ /* start of regulator's PM_RECEIVER control register bank */
+ u8 base;
+
+ /* twl4030 resource ID, for resource control state machine */
+ u8 id;
+
+ /* voltage in mV = table[VSEL]; table_len must be a power-of-two */
+ u8 table_len;
+ const u16 *table;
+
+ /* chip constraints on regulator behavior */
+ u16 min_mV;
+
+ /* used by regulator core */
+ struct regulator_desc desc;
+};
+
+
+/* LDO control registers ... offset is from the base of its register bank.
+ * The first three registers of all power resource banks help hardware to
+ * manage the various resource groups.
+ */
+#define VREG_GRP 0
+#define VREG_TYPE 1
+#define VREG_REMAP 2
+#define VREG_DEDICATED 3 /* LDO control */
+
+
+static inline int
+twl4030reg_read(struct twlreg_info *info, unsigned offset)
+{
+ u8 value;
+ int status;
+
+ status = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER,
+ &value, info->base + offset);
+ return (status < 0) ? status : value;
+}
+
+static inline int
+twl4030reg_write(struct twlreg_info *info, unsigned offset, u8 value)
+{
+ return twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ value, info->base + offset);
+}
+
+/*----------------------------------------------------------------------*/
+
+/* generic power resource operations, which work on all regulators */
+
+static int twl4030reg_grp(struct regulator_dev *rdev)
+{
+ return twl4030reg_read(rdev_get_drvdata(rdev), VREG_GRP);
+}
+
+/*
+ * Enable/disable regulators by joining/leaving the P1 (processor) group.
+ * We assume nobody else is updating the DEV_GRP registers.
+ */
+
+#define P3_GRP BIT(7) /* "peripherals" */
+#define P2_GRP BIT(6) /* secondary processor, modem, etc */
+#define P1_GRP BIT(5) /* CPU/Linux */
+
+static int twl4030reg_is_enabled(struct regulator_dev *rdev)
+{
+ int state = twl4030reg_grp(rdev);
+
+ if (state < 0)
+ return state;
+
+ return (state & P1_GRP) != 0;
+}
+
+static int twl4030reg_enable(struct regulator_dev *rdev)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int grp;
+
+ grp = twl4030reg_read(info, VREG_GRP);
+ if (grp < 0)
+ return grp;
+
+ grp |= P1_GRP;
+ return twl4030reg_write(info, VREG_GRP, grp);
+}
+
+static int twl4030reg_disable(struct regulator_dev *rdev)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int grp;
+
+ grp = twl4030reg_read(info, VREG_GRP);
+ if (grp < 0)
+ return grp;
+
+ grp &= ~P1_GRP;
+ return twl4030reg_write(info, VREG_GRP, grp);
+}
+
+static int twl4030reg_get_status(struct regulator_dev *rdev)
+{
+ int state = twl4030reg_grp(rdev);
+
+ if (state < 0)
+ return state;
+ state &= 0x0f;
+
+ /* assume state != WARM_RESET; we'd not be running... */
+ if (!state)
+ return REGULATOR_STATUS_OFF;
+ return (state & BIT(3))
+ ? REGULATOR_STATUS_NORMAL
+ : REGULATOR_STATUS_STANDBY;
+}
+
+static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ unsigned message;
+ int status;
+
+ /* We can only set the mode through state machine commands... */
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_ACTIVE);
+ break;
+ case REGULATOR_MODE_STANDBY:
+ message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_SLEEP);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Ensure the resource is associated with some group */
+ status = twl4030reg_grp(rdev);
+ if (status < 0)
+ return status;
+ if (!(status & (P3_GRP | P2_GRP | P1_GRP)))
+ return -EACCES;
+
+ status = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
+ message >> 8, 0x15 /* PB_WORD_MSB */ );
+ if (status >= 0)
+ return status;
+
+ return twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
+ message, 0x16 /* PB_WORD_LSB */ );
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Support for adjustable-voltage LDOs uses a four bit (or less) voltage
+ * select field in its control register. We use tables indexed by VSEL
+ * to record voltages in milliVolts. (Accuracy is about three percent.)
+ *
+ * Note that VSEL values for VAUX2 changed in twl5030 and newer silicon;
+ * currently handled by listing two slightly different VAUX2 regulators,
+ * only one of which will be configured.
+ *
+ * VSEL values documented as "TI cannot support these values" are flagged
+ * in these tables as UNSUP() values; we normally won't assign them.
+ *
+ * VAUX3 at 3V is incorrectly listed in some TI manuals as unsupported.
+ * TI are revising the twl5030/tps659x0 specs to support that 3.0V setting.
+ */
+#ifdef CONFIG_TWL4030_ALLOW_UNSUPPORTED
+#define UNSUP_MASK 0x0000
+#else
+#define UNSUP_MASK 0x8000
+#endif
+
+#define UNSUP(x) (UNSUP_MASK | (x))
+#define IS_UNSUP(x) (UNSUP_MASK & (x))
+#define LDO_MV(x) (~UNSUP_MASK & (x))
+
+
+static const u16 VAUX1_VSEL_table[] = {
+ UNSUP(1500), UNSUP(1800), 2500, 2800,
+ 3000, 3000, 3000, 3000,
+};
+static const u16 VAUX2_4030_VSEL_table[] = {
+ UNSUP(1000), UNSUP(1000), UNSUP(1200), 1300,
+ 1500, 1800, UNSUP(1850), 2500,
+ UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
+ UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
+};
+static const u16 VAUX2_VSEL_table[] = {
+ 1700, 1700, 1900, 1300,
+ 1500, 1800, 2000, 2500,
+ 2100, 2800, 2200, 2300,
+ 2400, 2400, 2400, 2400,
+};
+static const u16 VAUX3_VSEL_table[] = {
+ 1500, 1800, 2500, 2800,
+ 3000, 3000, 3000, 3000,
+};
+static const u16 VAUX4_VSEL_table[] = {
+ 700, 1000, 1200, UNSUP(1300),
+ 1500, 1800, UNSUP(1850), 2500,
+ UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
+ UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
+};
+static const u16 VMMC1_VSEL_table[] = {
+ 1850, 2850, 3000, 3150,
+};
+static const u16 VMMC2_VSEL_table[] = {
+ UNSUP(1000), UNSUP(1000), UNSUP(1200), UNSUP(1300),
+ UNSUP(1500), UNSUP(1800), 1850, UNSUP(2500),
+ 2600, 2800, 2850, 3000,
+ 3150, 3150, 3150, 3150,
+};
+static const u16 VPLL1_VSEL_table[] = {
+ 1000, 1200, 1300, 1800,
+ UNSUP(2800), UNSUP(3000), UNSUP(3000), UNSUP(3000),
+};
+static const u16 VPLL2_VSEL_table[] = {
+ 700, 1000, 1200, 1300,
+ UNSUP(1500), 1800, UNSUP(1850), UNSUP(2500),
+ UNSUP(2600), UNSUP(2800), UNSUP(2850), UNSUP(3000),
+ UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
+};
+static const u16 VSIM_VSEL_table[] = {
+ UNSUP(1000), UNSUP(1200), UNSUP(1300), 1800,
+ 2800, 3000, 3000, 3000,
+};
+static const u16 VDAC_VSEL_table[] = {
+ 1200, 1300, 1800, 1800,
+};
+
+
+static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int mV = info->table[index];
+
+ return IS_UNSUP(mV) ? 0 : (LDO_MV(mV) * 1000);
+}
+
+static int
+twl4030ldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int vsel;
+
+ for (vsel = 0; vsel < info->table_len; vsel++) {
+ int mV = info->table[vsel];
+ int uV;
+
+ if (IS_UNSUP(mV))
+ continue;
+ uV = LDO_MV(mV) * 1000;
+
+ /* REVISIT for VAUX2, first match may not be best/lowest */
+
+ /* use the first in-range value */
+ if (min_uV <= uV && uV <= max_uV)
+ return twl4030reg_write(info, VREG_DEDICATED, vsel);
+ }
+
+ return -EDOM;
+}
+
+static int twl4030ldo_get_voltage(struct regulator_dev *rdev)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+ int vsel = twl4030reg_read(info, VREG_DEDICATED);
+
+ if (vsel < 0)
+ return vsel;
+
+ vsel &= info->table_len - 1;
+ return LDO_MV(info->table[vsel]) * 1000;
+}
+
+static struct regulator_ops twl4030ldo_ops = {
+ .list_voltage = twl4030ldo_list_voltage,
+
+ .set_voltage = twl4030ldo_set_voltage,
+ .get_voltage = twl4030ldo_get_voltage,
+
+ .enable = twl4030reg_enable,
+ .disable = twl4030reg_disable,
+ .is_enabled = twl4030reg_is_enabled,
+
+ .set_mode = twl4030reg_set_mode,
+
+ .get_status = twl4030reg_get_status,
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Fixed voltage LDOs don't have a VSEL field to update.
+ */
+static int twl4030fixed_list_voltage(struct regulator_dev *rdev, unsigned index)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+
+ return info->min_mV * 1000;
+}
+
+static int twl4030fixed_get_voltage(struct regulator_dev *rdev)
+{
+ struct twlreg_info *info = rdev_get_drvdata(rdev);
+
+ return info->min_mV * 1000;
+}
+
+static struct regulator_ops twl4030fixed_ops = {
+ .list_voltage = twl4030fixed_list_voltage,
+
+ .get_voltage = twl4030fixed_get_voltage,
+
+ .enable = twl4030reg_enable,
+ .disable = twl4030reg_disable,
+ .is_enabled = twl4030reg_is_enabled,
+
+ .set_mode = twl4030reg_set_mode,
+
+ .get_status = twl4030reg_get_status,
+};
+
+/*----------------------------------------------------------------------*/
+
+#define TWL_ADJUSTABLE_LDO(label, offset, num) { \
+ .base = offset, \
+ .id = num, \
+ .table_len = ARRAY_SIZE(label##_VSEL_table), \
+ .table = label##_VSEL_table, \
+ .desc = { \
+ .name = #label, \
+ .id = TWL4030_REG_##label, \
+ .n_voltages = ARRAY_SIZE(label##_VSEL_table), \
+ .ops = &twl4030ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }, \
+ }
+
+#define TWL_FIXED_LDO(label, offset, mVolts, num) { \
+ .base = offset, \
+ .id = num, \
+ .min_mV = mVolts, \
+ .desc = { \
+ .name = #label, \
+ .id = TWL4030_REG_##label, \
+ .n_voltages = 1, \
+ .ops = &twl4030fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }, \
+ }
+
+/*
+ * We list regulators here if systems need some level of
+ * software control over them after boot.
+ */
+static struct twlreg_info twl4030_regs[] = {
+ TWL_ADJUSTABLE_LDO(VAUX1, 0x17, 1),
+ TWL_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2),
+ TWL_ADJUSTABLE_LDO(VAUX2, 0x1b, 2),
+ TWL_ADJUSTABLE_LDO(VAUX3, 0x1f, 3),
+ TWL_ADJUSTABLE_LDO(VAUX4, 0x23, 4),
+ TWL_ADJUSTABLE_LDO(VMMC1, 0x27, 5),
+ TWL_ADJUSTABLE_LDO(VMMC2, 0x2b, 6),
+ /*
+ TWL_ADJUSTABLE_LDO(VPLL1, 0x2f, 7),
+ */
+ TWL_ADJUSTABLE_LDO(VPLL2, 0x33, 8),
+ TWL_ADJUSTABLE_LDO(VSIM, 0x37, 9),
+ TWL_ADJUSTABLE_LDO(VDAC, 0x3b, 10),
+ /*
+ TWL_ADJUSTABLE_LDO(VINTANA1, 0x3f, 11),
+ TWL_ADJUSTABLE_LDO(VINTANA2, 0x43, 12),
+ TWL_ADJUSTABLE_LDO(VINTDIG, 0x47, 13),
+ TWL_SMPS(VIO, 0x4b, 14),
+ TWL_SMPS(VDD1, 0x55, 15),
+ TWL_SMPS(VDD2, 0x63, 16),
+ */
+ TWL_FIXED_LDO(VUSB1V5, 0x71, 1500, 17),
+ TWL_FIXED_LDO(VUSB1V8, 0x74, 1800, 18),
+ TWL_FIXED_LDO(VUSB3V1, 0x77, 3100, 19),
+ /* VUSBCP is managed *only* by the USB subchip */
+};
+
+static int twl4030reg_probe(struct platform_device *pdev)
+{
+ int i;
+ struct twlreg_info *info;
+ struct regulator_init_data *initdata;
+ struct regulation_constraints *c;
+ struct regulator_dev *rdev;
+
+ for (i = 0, info = NULL; i < ARRAY_SIZE(twl4030_regs); i++) {
+ if (twl4030_regs[i].desc.id != pdev->id)
+ continue;
+ info = twl4030_regs + i;
+ break;
+ }
+ if (!info)
+ return -ENODEV;
+
+ initdata = pdev->dev.platform_data;
+ if (!initdata)
+ return -EINVAL;
+
+ /* Constrain board-specific capabilities according to what
+ * this driver and the chip itself can actually do.
+ */
+ c = &initdata->constraints;
+ c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY;
+ c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS;
+
+ rdev = regulator_register(&info->desc, &pdev->dev, initdata, info);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "can't register %s, %ld\n",
+ info->desc.name, PTR_ERR(rdev));
+ return PTR_ERR(rdev);
+ }
+ platform_set_drvdata(pdev, rdev);
+
+ /* NOTE: many regulators support short-circuit IRQs (presentable
+ * as REGULATOR_OVER_CURRENT notifications?) configured via:
+ * - SC_CONFIG
+ * - SC_DETECT1 (vintana2, vmmc1/2, vaux1/2/3/4)
+ * - SC_DETECT2 (vusb, vdac, vio, vdd1/2, vpll2)
+ * - IT_CONFIG
+ */
+
+ return 0;
+}
+
+static int __devexit twl4030reg_remove(struct platform_device *pdev)
+{
+ regulator_unregister(platform_get_drvdata(pdev));
+ return 0;
+}
+
+MODULE_ALIAS("platform:twl4030_reg");
+
+static struct platform_driver twl4030reg_driver = {
+ .probe = twl4030reg_probe,
+ .remove = __devexit_p(twl4030reg_remove),
+ /* NOTE: short name, to work around driver model truncation of
+ * "twl4030_regulator.12" (and friends) to "twl4030_regulator.1".
+ */
+ .driver.name = "twl4030_reg",
+ .driver.owner = THIS_MODULE,
+};
+
+static int __init twl4030reg_init(void)
+{
+ return platform_driver_register(&twl4030reg_driver);
+}
+subsys_initcall(twl4030reg_init);
+
+static void __exit twl4030reg_exit(void)
+{
+ platform_driver_unregister(&twl4030reg_driver);
+}
+module_exit(twl4030reg_exit)
+
+MODULE_DESCRIPTION("TWL4030 regulator driver");
+MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * twl4030-regulator.c -- support regulators in twl4030 family chips
- *
- * Copyright (C) 2008 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
-
-
-/*
- * The TWL4030/TW5030/TPS659x0 family chips include power management, a
- * USB OTG transceiver, an RTC, ADC, PWM, and lots more. Some versions
- * include an audio codec, battery charger, and more voltage regulators.
- * These chips are often used in OMAP-based systems.
- *
- * This driver implements software-based resource control for various
- * voltage regulators. This is usually augmented with state machine
- * based control.
- */
-
-struct twlreg_info {
- /* start of regulator's PM_RECEIVER control register bank */
- u8 base;
-
- /* twl4030 resource ID, for resource control state machine */
- u8 id;
-
- /* voltage in mV = table[VSEL]; table_len must be a power-of-two */
- u8 table_len;
- const u16 *table;
-
- /* chip constraints on regulator behavior */
- u16 min_mV;
-
- /* used by regulator core */
- struct regulator_desc desc;
-};
-
-
-/* LDO control registers ... offset is from the base of its register bank.
- * The first three registers of all power resource banks help hardware to
- * manage the various resource groups.
- */
-#define VREG_GRP 0
-#define VREG_TYPE 1
-#define VREG_REMAP 2
-#define VREG_DEDICATED 3 /* LDO control */
-
-
-static inline int
-twl4030reg_read(struct twlreg_info *info, unsigned offset)
-{
- u8 value;
- int status;
-
- status = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER,
- &value, info->base + offset);
- return (status < 0) ? status : value;
-}
-
-static inline int
-twl4030reg_write(struct twlreg_info *info, unsigned offset, u8 value)
-{
- return twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
- value, info->base + offset);
-}
-
-/*----------------------------------------------------------------------*/
-
-/* generic power resource operations, which work on all regulators */
-
-static int twl4030reg_grp(struct regulator_dev *rdev)
-{
- return twl4030reg_read(rdev_get_drvdata(rdev), VREG_GRP);
-}
-
-/*
- * Enable/disable regulators by joining/leaving the P1 (processor) group.
- * We assume nobody else is updating the DEV_GRP registers.
- */
-
-#define P3_GRP BIT(7) /* "peripherals" */
-#define P2_GRP BIT(6) /* secondary processor, modem, etc */
-#define P1_GRP BIT(5) /* CPU/Linux */
-
-static int twl4030reg_is_enabled(struct regulator_dev *rdev)
-{
- int state = twl4030reg_grp(rdev);
-
- if (state < 0)
- return state;
-
- return (state & P1_GRP) != 0;
-}
-
-static int twl4030reg_enable(struct regulator_dev *rdev)
-{
- struct twlreg_info *info = rdev_get_drvdata(rdev);
- int grp;
-
- grp = twl4030reg_read(info, VREG_GRP);
- if (grp < 0)
- return grp;
-
- grp |= P1_GRP;
- return twl4030reg_write(info, VREG_GRP, grp);
-}
-
-static int twl4030reg_disable(struct regulator_dev *rdev)
-{
- struct twlreg_info *info = rdev_get_drvdata(rdev);
- int grp;
-
- grp = twl4030reg_read(info, VREG_GRP);
- if (grp < 0)
- return grp;
-
- grp &= ~P1_GRP;
- return twl4030reg_write(info, VREG_GRP, grp);
-}
-
-static int twl4030reg_get_status(struct regulator_dev *rdev)
-{
- int state = twl4030reg_grp(rdev);
-
- if (state < 0)
- return state;
- state &= 0x0f;
-
- /* assume state != WARM_RESET; we'd not be running... */
- if (!state)
- return REGULATOR_STATUS_OFF;
- return (state & BIT(3))
- ? REGULATOR_STATUS_NORMAL
- : REGULATOR_STATUS_STANDBY;
-}
-
-static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
-{
- struct twlreg_info *info = rdev_get_drvdata(rdev);
- unsigned message;
- int status;
-
- /* We can only set the mode through state machine commands... */
- switch (mode) {
- case REGULATOR_MODE_NORMAL:
- message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_ACTIVE);
- break;
- case REGULATOR_MODE_STANDBY:
- message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_SLEEP);
- break;
- default:
- return -EINVAL;
- }
-
- /* Ensure the resource is associated with some group */
- status = twl4030reg_grp(rdev);
- if (status < 0)
- return status;
- if (!(status & (P3_GRP | P2_GRP | P1_GRP)))
- return -EACCES;
-
- status = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
- message >> 8, 0x15 /* PB_WORD_MSB */ );
- if (status >= 0)
- return status;
-
- return twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER,
- message, 0x16 /* PB_WORD_LSB */ );
-}
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Support for adjustable-voltage LDOs uses a four bit (or less) voltage
- * select field in its control register. We use tables indexed by VSEL
- * to record voltages in milliVolts. (Accuracy is about three percent.)
- *
- * Note that VSEL values for VAUX2 changed in twl5030 and newer silicon;
- * currently handled by listing two slightly different VAUX2 regulators,
- * only one of which will be configured.
- *
- * VSEL values documented as "TI cannot support these values" are flagged
- * in these tables as UNSUP() values; we normally won't assign them.
- *
- * VAUX3 at 3V is incorrectly listed in some TI manuals as unsupported.
- * TI are revising the twl5030/tps659x0 specs to support that 3.0V setting.
- */
-#ifdef CONFIG_TWL4030_ALLOW_UNSUPPORTED
-#define UNSUP_MASK 0x0000
-#else
-#define UNSUP_MASK 0x8000
-#endif
-
-#define UNSUP(x) (UNSUP_MASK | (x))
-#define IS_UNSUP(x) (UNSUP_MASK & (x))
-#define LDO_MV(x) (~UNSUP_MASK & (x))
-
-
-static const u16 VAUX1_VSEL_table[] = {
- UNSUP(1500), UNSUP(1800), 2500, 2800,
- 3000, 3000, 3000, 3000,
-};
-static const u16 VAUX2_4030_VSEL_table[] = {
- UNSUP(1000), UNSUP(1000), UNSUP(1200), 1300,
- 1500, 1800, UNSUP(1850), 2500,
- UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
- UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
-};
-static const u16 VAUX2_VSEL_table[] = {
- 1700, 1700, 1900, 1300,
- 1500, 1800, 2000, 2500,
- 2100, 2800, 2200, 2300,
- 2400, 2400, 2400, 2400,
-};
-static const u16 VAUX3_VSEL_table[] = {
- 1500, 1800, 2500, 2800,
- 3000, 3000, 3000, 3000,
-};
-static const u16 VAUX4_VSEL_table[] = {
- 700, 1000, 1200, UNSUP(1300),
- 1500, 1800, UNSUP(1850), 2500,
- UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
- UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
-};
-static const u16 VMMC1_VSEL_table[] = {
- 1850, 2850, 3000, 3150,
-};
-static const u16 VMMC2_VSEL_table[] = {
- UNSUP(1000), UNSUP(1000), UNSUP(1200), UNSUP(1300),
- UNSUP(1500), UNSUP(1800), 1850, UNSUP(2500),
- 2600, 2800, 2850, 3000,
- 3150, 3150, 3150, 3150,
-};
-static const u16 VPLL1_VSEL_table[] = {
- 1000, 1200, 1300, 1800,
- UNSUP(2800), UNSUP(3000), UNSUP(3000), UNSUP(3000),
-};
-static const u16 VPLL2_VSEL_table[] = {
- 700, 1000, 1200, 1300,
- UNSUP(1500), 1800, UNSUP(1850), UNSUP(2500),
- UNSUP(2600), UNSUP(2800), UNSUP(2850), UNSUP(3000),
- UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
-};
-static const u16 VSIM_VSEL_table[] = {
- UNSUP(1000), UNSUP(1200), UNSUP(1300), 1800,
- 2800, 3000, 3000, 3000,
-};
-static const u16 VDAC_VSEL_table[] = {
- 1200, 1300, 1800, 1800,
-};
-
-
-static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
-{
- struct twlreg_info *info = rdev_get_drvdata(rdev);
- int mV = info->table[index];
-
- return IS_UNSUP(mV) ? 0 : (LDO_MV(mV) * 1000);
-}
-
-static int
-twl4030ldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
-{
- struct twlreg_info *info = rdev_get_drvdata(rdev);
- int vsel;
-
- for (vsel = 0; vsel < info->table_len; vsel++) {
- int mV = info->table[vsel];
- int uV;
-
- if (IS_UNSUP(mV))
- continue;
- uV = LDO_MV(mV) * 1000;
-
- /* REVISIT for VAUX2, first match may not be best/lowest */
-
- /* use the first in-range value */
- if (min_uV <= uV && uV <= max_uV)
- return twl4030reg_write(info, VREG_DEDICATED, vsel);
- }
-
- return -EDOM;
-}
-
-static int twl4030ldo_get_voltage(struct regulator_dev *rdev)
-{
- struct twlreg_info *info = rdev_get_drvdata(rdev);
- int vsel = twl4030reg_read(info, VREG_DEDICATED);
-
- if (vsel < 0)
- return vsel;
-
- vsel &= info->table_len - 1;
- return LDO_MV(info->table[vsel]) * 1000;
-}
-
-static struct regulator_ops twl4030ldo_ops = {
- .list_voltage = twl4030ldo_list_voltage,
-
- .set_voltage = twl4030ldo_set_voltage,
- .get_voltage = twl4030ldo_get_voltage,
-
- .enable = twl4030reg_enable,
- .disable = twl4030reg_disable,
- .is_enabled = twl4030reg_is_enabled,
-
- .set_mode = twl4030reg_set_mode,
-
- .get_status = twl4030reg_get_status,
-};
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Fixed voltage LDOs don't have a VSEL field to update.
- */
-static int twl4030fixed_list_voltage(struct regulator_dev *rdev, unsigned index)
-{
- struct twlreg_info *info = rdev_get_drvdata(rdev);
-
- return info->min_mV * 1000;
-}
-
-static int twl4030fixed_get_voltage(struct regulator_dev *rdev)
-{
- struct twlreg_info *info = rdev_get_drvdata(rdev);
-
- return info->min_mV * 1000;
-}
-
-static struct regulator_ops twl4030fixed_ops = {
- .list_voltage = twl4030fixed_list_voltage,
-
- .get_voltage = twl4030fixed_get_voltage,
-
- .enable = twl4030reg_enable,
- .disable = twl4030reg_disable,
- .is_enabled = twl4030reg_is_enabled,
-
- .set_mode = twl4030reg_set_mode,
-
- .get_status = twl4030reg_get_status,
-};
-
-/*----------------------------------------------------------------------*/
-
-#define TWL_ADJUSTABLE_LDO(label, offset, num) { \
- .base = offset, \
- .id = num, \
- .table_len = ARRAY_SIZE(label##_VSEL_table), \
- .table = label##_VSEL_table, \
- .desc = { \
- .name = #label, \
- .id = TWL4030_REG_##label, \
- .n_voltages = ARRAY_SIZE(label##_VSEL_table), \
- .ops = &twl4030ldo_ops, \
- .type = REGULATOR_VOLTAGE, \
- .owner = THIS_MODULE, \
- }, \
- }
-
-#define TWL_FIXED_LDO(label, offset, mVolts, num) { \
- .base = offset, \
- .id = num, \
- .min_mV = mVolts, \
- .desc = { \
- .name = #label, \
- .id = TWL4030_REG_##label, \
- .n_voltages = 1, \
- .ops = &twl4030fixed_ops, \
- .type = REGULATOR_VOLTAGE, \
- .owner = THIS_MODULE, \
- }, \
- }
-
-/*
- * We list regulators here if systems need some level of
- * software control over them after boot.
- */
-static struct twlreg_info twl4030_regs[] = {
- TWL_ADJUSTABLE_LDO(VAUX1, 0x17, 1),
- TWL_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2),
- TWL_ADJUSTABLE_LDO(VAUX2, 0x1b, 2),
- TWL_ADJUSTABLE_LDO(VAUX3, 0x1f, 3),
- TWL_ADJUSTABLE_LDO(VAUX4, 0x23, 4),
- TWL_ADJUSTABLE_LDO(VMMC1, 0x27, 5),
- TWL_ADJUSTABLE_LDO(VMMC2, 0x2b, 6),
- /*
- TWL_ADJUSTABLE_LDO(VPLL1, 0x2f, 7),
- */
- TWL_ADJUSTABLE_LDO(VPLL2, 0x33, 8),
- TWL_ADJUSTABLE_LDO(VSIM, 0x37, 9),
- TWL_ADJUSTABLE_LDO(VDAC, 0x3b, 10),
- /*
- TWL_ADJUSTABLE_LDO(VINTANA1, 0x3f, 11),
- TWL_ADJUSTABLE_LDO(VINTANA2, 0x43, 12),
- TWL_ADJUSTABLE_LDO(VINTDIG, 0x47, 13),
- TWL_SMPS(VIO, 0x4b, 14),
- TWL_SMPS(VDD1, 0x55, 15),
- TWL_SMPS(VDD2, 0x63, 16),
- */
- TWL_FIXED_LDO(VUSB1V5, 0x71, 1500, 17),
- TWL_FIXED_LDO(VUSB1V8, 0x74, 1800, 18),
- TWL_FIXED_LDO(VUSB3V1, 0x77, 3100, 19),
- /* VUSBCP is managed *only* by the USB subchip */
-};
-
-static int twl4030reg_probe(struct platform_device *pdev)
-{
- int i;
- struct twlreg_info *info;
- struct regulator_init_data *initdata;
- struct regulation_constraints *c;
- struct regulator_dev *rdev;
-
- for (i = 0, info = NULL; i < ARRAY_SIZE(twl4030_regs); i++) {
- if (twl4030_regs[i].desc.id != pdev->id)
- continue;
- info = twl4030_regs + i;
- break;
- }
- if (!info)
- return -ENODEV;
-
- initdata = pdev->dev.platform_data;
- if (!initdata)
- return -EINVAL;
-
- /* Constrain board-specific capabilities according to what
- * this driver and the chip itself can actually do.
- */
- c = &initdata->constraints;
- c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY;
- c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS;
-
- rdev = regulator_register(&info->desc, &pdev->dev, initdata, info);
- if (IS_ERR(rdev)) {
- dev_err(&pdev->dev, "can't register %s, %ld\n",
- info->desc.name, PTR_ERR(rdev));
- return PTR_ERR(rdev);
- }
- platform_set_drvdata(pdev, rdev);
-
- /* NOTE: many regulators support short-circuit IRQs (presentable
- * as REGULATOR_OVER_CURRENT notifications?) configured via:
- * - SC_CONFIG
- * - SC_DETECT1 (vintana2, vmmc1/2, vaux1/2/3/4)
- * - SC_DETECT2 (vusb, vdac, vio, vdd1/2, vpll2)
- * - IT_CONFIG
- */
-
- return 0;
-}
-
-static int __devexit twl4030reg_remove(struct platform_device *pdev)
-{
- regulator_unregister(platform_get_drvdata(pdev));
- return 0;
-}
-
-MODULE_ALIAS("platform:twl4030_reg");
-
-static struct platform_driver twl4030reg_driver = {
- .probe = twl4030reg_probe,
- .remove = __devexit_p(twl4030reg_remove),
- /* NOTE: short name, to work around driver model truncation of
- * "twl4030_regulator.12" (and friends) to "twl4030_regulator.1".
- */
- .driver.name = "twl4030_reg",
- .driver.owner = THIS_MODULE,
-};
-
-static int __init twl4030reg_init(void)
-{
- return platform_driver_register(&twl4030reg_driver);
-}
-subsys_initcall(twl4030reg_init);
-
-static void __exit twl4030reg_exit(void)
-{
- platform_driver_unregister(&twl4030reg_driver);
-}
-module_exit(twl4030reg_exit)
-
-MODULE_DESCRIPTION("TWL4030 regulator driver");
-MODULE_LICENSE("GPL");
obj-$(CONFIG_RTC_DRV_STMP) += rtc-stmp3xxx.o
obj-$(CONFIG_RTC_DRV_SUN4V) += rtc-sun4v.o
obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
-obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o
+obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl.o
obj-$(CONFIG_RTC_DRV_TX4939) += rtc-tx4939.o
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o
--- /dev/null
+/*
+ * rtc-twl4030.c -- TWL4030 Real Time Clock interface
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc
+ * Author: Alexandre Rusev <source@mvista.com>
+ *
+ * Based on original TI driver twl4030-rtc.c
+ * Copyright (C) 2006 Texas Instruments, Inc.
+ *
+ * Based on rtc-omap.c
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
+ * Copyright (C) 2006 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+
+#include <linux/i2c/twl.h>
+
+
+/*
+ * RTC block register offsets (use TWL_MODULE_RTC)
+ */
+#define REG_SECONDS_REG 0x00
+#define REG_MINUTES_REG 0x01
+#define REG_HOURS_REG 0x02
+#define REG_DAYS_REG 0x03
+#define REG_MONTHS_REG 0x04
+#define REG_YEARS_REG 0x05
+#define REG_WEEKS_REG 0x06
+
+#define REG_ALARM_SECONDS_REG 0x07
+#define REG_ALARM_MINUTES_REG 0x08
+#define REG_ALARM_HOURS_REG 0x09
+#define REG_ALARM_DAYS_REG 0x0A
+#define REG_ALARM_MONTHS_REG 0x0B
+#define REG_ALARM_YEARS_REG 0x0C
+
+#define REG_RTC_CTRL_REG 0x0D
+#define REG_RTC_STATUS_REG 0x0E
+#define REG_RTC_INTERRUPTS_REG 0x0F
+
+#define REG_RTC_COMP_LSB_REG 0x10
+#define REG_RTC_COMP_MSB_REG 0x11
+
+/* RTC_CTRL_REG bitfields */
+#define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01
+#define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02
+#define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04
+#define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08
+#define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10
+#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20
+#define BIT_RTC_CTRL_REG_GET_TIME_M 0x40
+
+/* RTC_STATUS_REG bitfields */
+#define BIT_RTC_STATUS_REG_RUN_M 0x02
+#define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04
+#define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08
+#define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10
+#define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20
+#define BIT_RTC_STATUS_REG_ALARM_M 0x40
+#define BIT_RTC_STATUS_REG_POWER_UP_M 0x80
+
+/* RTC_INTERRUPTS_REG bitfields */
+#define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03
+#define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04
+#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08
+
+
+/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
+#define ALL_TIME_REGS 6
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Supports 1 byte read from TWL4030 RTC register.
+ */
+static int twl4030_rtc_read_u8(u8 *data, u8 reg)
+{
+ int ret;
+
+ ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg);
+ if (ret < 0)
+ pr_err("twl4030_rtc: Could not read TWL4030"
+ "register %X - error %d\n", reg, ret);
+ return ret;
+}
+
+/*
+ * Supports 1 byte write to TWL4030 RTC registers.
+ */
+static int twl4030_rtc_write_u8(u8 data, u8 reg)
+{
+ int ret;
+
+ ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg);
+ if (ret < 0)
+ pr_err("twl4030_rtc: Could not write TWL4030"
+ "register %X - error %d\n", reg, ret);
+ return ret;
+}
+
+/*
+ * Cache the value for timer/alarm interrupts register; this is
+ * only changed by callers holding rtc ops lock (or resume).
+ */
+static unsigned char rtc_irq_bits;
+
+/*
+ * Enable 1/second update and/or alarm interrupts.
+ */
+static int set_rtc_irq_bit(unsigned char bit)
+{
+ unsigned char val;
+ int ret;
+
+ val = rtc_irq_bits | bit;
+ val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
+ ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
+ if (ret == 0)
+ rtc_irq_bits = val;
+
+ return ret;
+}
+
+/*
+ * Disable update and/or alarm interrupts.
+ */
+static int mask_rtc_irq_bit(unsigned char bit)
+{
+ unsigned char val;
+ int ret;
+
+ val = rtc_irq_bits & ~bit;
+ ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
+ if (ret == 0)
+ rtc_irq_bits = val;
+
+ return ret;
+}
+
+static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
+{
+ int ret;
+
+ if (enabled)
+ ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+ else
+ ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+
+ return ret;
+}
+
+static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled)
+{
+ int ret;
+
+ if (enabled)
+ ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+ else
+ ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+
+ return ret;
+}
+
+/*
+ * Gets current TWL4030 RTC time and date parameters.
+ *
+ * The RTC's time/alarm representation is not what gmtime(3) requires
+ * Linux to use:
+ *
+ * - Months are 1..12 vs Linux 0-11
+ * - Years are 0..99 vs Linux 1900..N (we assume 21st century)
+ */
+static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ unsigned char rtc_data[ALL_TIME_REGS + 1];
+ int ret;
+ u8 save_control;
+
+ ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
+ if (ret < 0)
+ return ret;
+
+ save_control |= BIT_RTC_CTRL_REG_GET_TIME_M;
+
+ ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+ if (ret < 0)
+ return ret;
+
+ ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data,
+ REG_SECONDS_REG, ALL_TIME_REGS);
+
+ if (ret < 0) {
+ dev_err(dev, "rtc_read_time error %d\n", ret);
+ return ret;
+ }
+
+ tm->tm_sec = bcd2bin(rtc_data[0]);
+ tm->tm_min = bcd2bin(rtc_data[1]);
+ tm->tm_hour = bcd2bin(rtc_data[2]);
+ tm->tm_mday = bcd2bin(rtc_data[3]);
+ tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
+ tm->tm_year = bcd2bin(rtc_data[5]) + 100;
+
+ return ret;
+}
+
+static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ unsigned char save_control;
+ unsigned char rtc_data[ALL_TIME_REGS + 1];
+ int ret;
+
+ rtc_data[1] = bin2bcd(tm->tm_sec);
+ rtc_data[2] = bin2bcd(tm->tm_min);
+ rtc_data[3] = bin2bcd(tm->tm_hour);
+ rtc_data[4] = bin2bcd(tm->tm_mday);
+ rtc_data[5] = bin2bcd(tm->tm_mon + 1);
+ rtc_data[6] = bin2bcd(tm->tm_year - 100);
+
+ /* Stop RTC while updating the TC registers */
+ ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
+ if (ret < 0)
+ goto out;
+
+ save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
+ twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+ if (ret < 0)
+ goto out;
+
+ /* update all the time registers in one shot */
+ ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data,
+ REG_SECONDS_REG, ALL_TIME_REGS);
+ if (ret < 0) {
+ dev_err(dev, "rtc_set_time error %d\n", ret);
+ goto out;
+ }
+
+ /* Start back RTC */
+ save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M;
+ ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+
+out:
+ return ret;
+}
+
+/*
+ * Gets current TWL4030 RTC alarm time.
+ */
+static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+ unsigned char rtc_data[ALL_TIME_REGS + 1];
+ int ret;
+
+ ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data,
+ REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
+ if (ret < 0) {
+ dev_err(dev, "rtc_read_alarm error %d\n", ret);
+ return ret;
+ }
+
+ /* some of these fields may be wildcard/"match all" */
+ alm->time.tm_sec = bcd2bin(rtc_data[0]);
+ alm->time.tm_min = bcd2bin(rtc_data[1]);
+ alm->time.tm_hour = bcd2bin(rtc_data[2]);
+ alm->time.tm_mday = bcd2bin(rtc_data[3]);
+ alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1;
+ alm->time.tm_year = bcd2bin(rtc_data[5]) + 100;
+
+ /* report cached alarm enable state */
+ if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M)
+ alm->enabled = 1;
+
+ return ret;
+}
+
+static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
+{
+ unsigned char alarm_data[ALL_TIME_REGS + 1];
+ int ret;
+
+ ret = twl4030_rtc_alarm_irq_enable(dev, 0);
+ if (ret)
+ goto out;
+
+ alarm_data[1] = bin2bcd(alm->time.tm_sec);
+ alarm_data[2] = bin2bcd(alm->time.tm_min);
+ alarm_data[3] = bin2bcd(alm->time.tm_hour);
+ alarm_data[4] = bin2bcd(alm->time.tm_mday);
+ alarm_data[5] = bin2bcd(alm->time.tm_mon + 1);
+ alarm_data[6] = bin2bcd(alm->time.tm_year - 100);
+
+ /* update all the alarm registers in one shot */
+ ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data,
+ REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
+ if (ret) {
+ dev_err(dev, "rtc_set_alarm error %d\n", ret);
+ goto out;
+ }
+
+ if (alm->enabled)
+ ret = twl4030_rtc_alarm_irq_enable(dev, 1);
+out:
+ return ret;
+}
+
+static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
+{
+ unsigned long events = 0;
+ int ret = IRQ_NONE;
+ int res;
+ u8 rd_reg;
+
+#ifdef CONFIG_LOCKDEP
+ /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
+ * we don't want and can't tolerate. Although it might be
+ * friendlier not to borrow this thread context...
+ */
+ local_irq_enable();
+#endif
+
+ res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
+ if (res)
+ goto out;
+ /*
+ * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG.
+ * only one (ALARM or RTC) interrupt source may be enabled
+ * at time, we also could check our results
+ * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM]
+ */
+ if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
+ events |= RTC_IRQF | RTC_AF;
+ else
+ events |= RTC_IRQF | RTC_UF;
+
+ res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M,
+ REG_RTC_STATUS_REG);
+ if (res)
+ goto out;
+
+ /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
+ * needs 2 reads to clear the interrupt. One read is done in
+ * do_twl4030_pwrirq(). Doing the second read, to clear
+ * the bit.
+ *
+ * FIXME the reason PWR_ISR1 needs an extra read is that
+ * RTC_IF retriggered until we cleared REG_ALARM_M above.
+ * But re-reading like this is a bad hack; by doing so we
+ * risk wrongly clearing status for some other IRQ (losing
+ * the interrupt). Be smarter about handling RTC_UF ...
+ */
+ res = twl4030_i2c_read_u8(TWL4030_MODULE_INT,
+ &rd_reg, TWL4030_INT_PWR_ISR1);
+ if (res)
+ goto out;
+
+ /* Notify RTC core on event */
+ rtc_update_irq(rtc, 1, events);
+
+ ret = IRQ_HANDLED;
+out:
+ return ret;
+}
+
+static struct rtc_class_ops twl4030_rtc_ops = {
+ .read_time = twl4030_rtc_read_time,
+ .set_time = twl4030_rtc_set_time,
+ .read_alarm = twl4030_rtc_read_alarm,
+ .set_alarm = twl4030_rtc_set_alarm,
+ .alarm_irq_enable = twl4030_rtc_alarm_irq_enable,
+ .update_irq_enable = twl4030_rtc_update_irq_enable,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
+{
+ struct rtc_device *rtc;
+ int ret = 0;
+ int irq = platform_get_irq(pdev, 0);
+ u8 rd_reg;
+
+ if (irq <= 0)
+ return -EINVAL;
+
+ rtc = rtc_device_register(pdev->name,
+ &pdev->dev, &twl4030_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ ret = PTR_ERR(rtc);
+ dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+ PTR_ERR(rtc));
+ goto out0;
+
+ }
+
+ platform_set_drvdata(pdev, rtc);
+
+ ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
+ if (ret < 0)
+ goto out1;
+
+ if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
+ dev_warn(&pdev->dev, "Power up reset detected.\n");
+
+ if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
+ dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");
+
+ /* Clear RTC Power up reset and pending alarm interrupts */
+ ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
+ if (ret < 0)
+ goto out1;
+
+ ret = request_irq(irq, twl4030_rtc_interrupt,
+ IRQF_TRIGGER_RISING,
+ dev_name(&rtc->dev), rtc);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "IRQ is not free.\n");
+ goto out1;
+ }
+
+ /* Check RTC module status, Enable if it is off */
+ ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
+ if (ret < 0)
+ goto out2;
+
+ if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) {
+ dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n");
+ rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M;
+ ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG);
+ if (ret < 0)
+ goto out2;
+ }
+
+ /* init cached IRQ enable bits */
+ ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
+ if (ret < 0)
+ goto out2;
+
+ return ret;
+
+out2:
+ free_irq(irq, rtc);
+out1:
+ rtc_device_unregister(rtc);
+out0:
+ return ret;
+}
+
+/*
+ * Disable all TWL4030 RTC module interrupts.
+ * Sets status flag to free.
+ */
+static int __devexit twl4030_rtc_remove(struct platform_device *pdev)
+{
+ /* leave rtc running, but disable irqs */
+ struct rtc_device *rtc = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+
+ mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+ mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+
+ free_irq(irq, rtc);
+
+ rtc_device_unregister(rtc);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static void twl4030_rtc_shutdown(struct platform_device *pdev)
+{
+ /* mask timer interrupts, but leave alarm interrupts on to enable
+ power-on when alarm is triggered */
+ mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+}
+
+#ifdef CONFIG_PM
+
+static unsigned char irqstat;
+
+static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ irqstat = rtc_irq_bits;
+
+ mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
+ return 0;
+}
+
+static int twl4030_rtc_resume(struct platform_device *pdev)
+{
+ set_rtc_irq_bit(irqstat);
+ return 0;
+}
+
+#else
+#define twl4030_rtc_suspend NULL
+#define twl4030_rtc_resume NULL
+#endif
+
+MODULE_ALIAS("platform:twl4030_rtc");
+
+static struct platform_driver twl4030rtc_driver = {
+ .probe = twl4030_rtc_probe,
+ .remove = __devexit_p(twl4030_rtc_remove),
+ .shutdown = twl4030_rtc_shutdown,
+ .suspend = twl4030_rtc_suspend,
+ .resume = twl4030_rtc_resume,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "twl4030_rtc",
+ },
+};
+
+static int __init twl4030_rtc_init(void)
+{
+ return platform_driver_register(&twl4030rtc_driver);
+}
+module_init(twl4030_rtc_init);
+
+static void __exit twl4030_rtc_exit(void)
+{
+ platform_driver_unregister(&twl4030rtc_driver);
+}
+module_exit(twl4030_rtc_exit);
+
+MODULE_AUTHOR("Texas Instruments, MontaVista Software");
+MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * rtc-twl4030.c -- TWL4030 Real Time Clock interface
- *
- * Copyright (C) 2007 MontaVista Software, Inc
- * Author: Alexandre Rusev <source@mvista.com>
- *
- * Based on original TI driver twl4030-rtc.c
- * Copyright (C) 2006 Texas Instruments, Inc.
- *
- * Based on rtc-omap.c
- * Copyright (C) 2003 MontaVista Software, Inc.
- * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
- * Copyright (C) 2006 David Brownell
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/rtc.h>
-#include <linux/bcd.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-
-#include <linux/i2c/twl4030.h>
-
-
-/*
- * RTC block register offsets (use TWL_MODULE_RTC)
- */
-#define REG_SECONDS_REG 0x00
-#define REG_MINUTES_REG 0x01
-#define REG_HOURS_REG 0x02
-#define REG_DAYS_REG 0x03
-#define REG_MONTHS_REG 0x04
-#define REG_YEARS_REG 0x05
-#define REG_WEEKS_REG 0x06
-
-#define REG_ALARM_SECONDS_REG 0x07
-#define REG_ALARM_MINUTES_REG 0x08
-#define REG_ALARM_HOURS_REG 0x09
-#define REG_ALARM_DAYS_REG 0x0A
-#define REG_ALARM_MONTHS_REG 0x0B
-#define REG_ALARM_YEARS_REG 0x0C
-
-#define REG_RTC_CTRL_REG 0x0D
-#define REG_RTC_STATUS_REG 0x0E
-#define REG_RTC_INTERRUPTS_REG 0x0F
-
-#define REG_RTC_COMP_LSB_REG 0x10
-#define REG_RTC_COMP_MSB_REG 0x11
-
-/* RTC_CTRL_REG bitfields */
-#define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01
-#define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02
-#define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04
-#define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08
-#define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10
-#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20
-#define BIT_RTC_CTRL_REG_GET_TIME_M 0x40
-
-/* RTC_STATUS_REG bitfields */
-#define BIT_RTC_STATUS_REG_RUN_M 0x02
-#define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04
-#define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08
-#define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10
-#define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20
-#define BIT_RTC_STATUS_REG_ALARM_M 0x40
-#define BIT_RTC_STATUS_REG_POWER_UP_M 0x80
-
-/* RTC_INTERRUPTS_REG bitfields */
-#define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03
-#define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04
-#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08
-
-
-/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
-#define ALL_TIME_REGS 6
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Supports 1 byte read from TWL4030 RTC register.
- */
-static int twl4030_rtc_read_u8(u8 *data, u8 reg)
-{
- int ret;
-
- ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg);
- if (ret < 0)
- pr_err("twl4030_rtc: Could not read TWL4030"
- "register %X - error %d\n", reg, ret);
- return ret;
-}
-
-/*
- * Supports 1 byte write to TWL4030 RTC registers.
- */
-static int twl4030_rtc_write_u8(u8 data, u8 reg)
-{
- int ret;
-
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg);
- if (ret < 0)
- pr_err("twl4030_rtc: Could not write TWL4030"
- "register %X - error %d\n", reg, ret);
- return ret;
-}
-
-/*
- * Cache the value for timer/alarm interrupts register; this is
- * only changed by callers holding rtc ops lock (or resume).
- */
-static unsigned char rtc_irq_bits;
-
-/*
- * Enable 1/second update and/or alarm interrupts.
- */
-static int set_rtc_irq_bit(unsigned char bit)
-{
- unsigned char val;
- int ret;
-
- val = rtc_irq_bits | bit;
- val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
- ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
- if (ret == 0)
- rtc_irq_bits = val;
-
- return ret;
-}
-
-/*
- * Disable update and/or alarm interrupts.
- */
-static int mask_rtc_irq_bit(unsigned char bit)
-{
- unsigned char val;
- int ret;
-
- val = rtc_irq_bits & ~bit;
- ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
- if (ret == 0)
- rtc_irq_bits = val;
-
- return ret;
-}
-
-static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
-{
- int ret;
-
- if (enabled)
- ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
- else
- ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
-
- return ret;
-}
-
-static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled)
-{
- int ret;
-
- if (enabled)
- ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
- else
- ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
-
- return ret;
-}
-
-/*
- * Gets current TWL4030 RTC time and date parameters.
- *
- * The RTC's time/alarm representation is not what gmtime(3) requires
- * Linux to use:
- *
- * - Months are 1..12 vs Linux 0-11
- * - Years are 0..99 vs Linux 1900..N (we assume 21st century)
- */
-static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm)
-{
- unsigned char rtc_data[ALL_TIME_REGS + 1];
- int ret;
- u8 save_control;
-
- ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
- if (ret < 0)
- return ret;
-
- save_control |= BIT_RTC_CTRL_REG_GET_TIME_M;
-
- ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
- if (ret < 0)
- return ret;
-
- ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data,
- REG_SECONDS_REG, ALL_TIME_REGS);
-
- if (ret < 0) {
- dev_err(dev, "rtc_read_time error %d\n", ret);
- return ret;
- }
-
- tm->tm_sec = bcd2bin(rtc_data[0]);
- tm->tm_min = bcd2bin(rtc_data[1]);
- tm->tm_hour = bcd2bin(rtc_data[2]);
- tm->tm_mday = bcd2bin(rtc_data[3]);
- tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
- tm->tm_year = bcd2bin(rtc_data[5]) + 100;
-
- return ret;
-}
-
-static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm)
-{
- unsigned char save_control;
- unsigned char rtc_data[ALL_TIME_REGS + 1];
- int ret;
-
- rtc_data[1] = bin2bcd(tm->tm_sec);
- rtc_data[2] = bin2bcd(tm->tm_min);
- rtc_data[3] = bin2bcd(tm->tm_hour);
- rtc_data[4] = bin2bcd(tm->tm_mday);
- rtc_data[5] = bin2bcd(tm->tm_mon + 1);
- rtc_data[6] = bin2bcd(tm->tm_year - 100);
-
- /* Stop RTC while updating the TC registers */
- ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
- if (ret < 0)
- goto out;
-
- save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
- twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
- if (ret < 0)
- goto out;
-
- /* update all the time registers in one shot */
- ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data,
- REG_SECONDS_REG, ALL_TIME_REGS);
- if (ret < 0) {
- dev_err(dev, "rtc_set_time error %d\n", ret);
- goto out;
- }
-
- /* Start back RTC */
- save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M;
- ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
-
-out:
- return ret;
-}
-
-/*
- * Gets current TWL4030 RTC alarm time.
- */
-static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
-{
- unsigned char rtc_data[ALL_TIME_REGS + 1];
- int ret;
-
- ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data,
- REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
- if (ret < 0) {
- dev_err(dev, "rtc_read_alarm error %d\n", ret);
- return ret;
- }
-
- /* some of these fields may be wildcard/"match all" */
- alm->time.tm_sec = bcd2bin(rtc_data[0]);
- alm->time.tm_min = bcd2bin(rtc_data[1]);
- alm->time.tm_hour = bcd2bin(rtc_data[2]);
- alm->time.tm_mday = bcd2bin(rtc_data[3]);
- alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1;
- alm->time.tm_year = bcd2bin(rtc_data[5]) + 100;
-
- /* report cached alarm enable state */
- if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M)
- alm->enabled = 1;
-
- return ret;
-}
-
-static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
-{
- unsigned char alarm_data[ALL_TIME_REGS + 1];
- int ret;
-
- ret = twl4030_rtc_alarm_irq_enable(dev, 0);
- if (ret)
- goto out;
-
- alarm_data[1] = bin2bcd(alm->time.tm_sec);
- alarm_data[2] = bin2bcd(alm->time.tm_min);
- alarm_data[3] = bin2bcd(alm->time.tm_hour);
- alarm_data[4] = bin2bcd(alm->time.tm_mday);
- alarm_data[5] = bin2bcd(alm->time.tm_mon + 1);
- alarm_data[6] = bin2bcd(alm->time.tm_year - 100);
-
- /* update all the alarm registers in one shot */
- ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data,
- REG_ALARM_SECONDS_REG, ALL_TIME_REGS);
- if (ret) {
- dev_err(dev, "rtc_set_alarm error %d\n", ret);
- goto out;
- }
-
- if (alm->enabled)
- ret = twl4030_rtc_alarm_irq_enable(dev, 1);
-out:
- return ret;
-}
-
-static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
-{
- unsigned long events = 0;
- int ret = IRQ_NONE;
- int res;
- u8 rd_reg;
-
-#ifdef CONFIG_LOCKDEP
- /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
- * we don't want and can't tolerate. Although it might be
- * friendlier not to borrow this thread context...
- */
- local_irq_enable();
-#endif
-
- res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
- if (res)
- goto out;
- /*
- * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG.
- * only one (ALARM or RTC) interrupt source may be enabled
- * at time, we also could check our results
- * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM]
- */
- if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
- events |= RTC_IRQF | RTC_AF;
- else
- events |= RTC_IRQF | RTC_UF;
-
- res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M,
- REG_RTC_STATUS_REG);
- if (res)
- goto out;
-
- /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
- * needs 2 reads to clear the interrupt. One read is done in
- * do_twl4030_pwrirq(). Doing the second read, to clear
- * the bit.
- *
- * FIXME the reason PWR_ISR1 needs an extra read is that
- * RTC_IF retriggered until we cleared REG_ALARM_M above.
- * But re-reading like this is a bad hack; by doing so we
- * risk wrongly clearing status for some other IRQ (losing
- * the interrupt). Be smarter about handling RTC_UF ...
- */
- res = twl4030_i2c_read_u8(TWL4030_MODULE_INT,
- &rd_reg, TWL4030_INT_PWR_ISR1);
- if (res)
- goto out;
-
- /* Notify RTC core on event */
- rtc_update_irq(rtc, 1, events);
-
- ret = IRQ_HANDLED;
-out:
- return ret;
-}
-
-static struct rtc_class_ops twl4030_rtc_ops = {
- .read_time = twl4030_rtc_read_time,
- .set_time = twl4030_rtc_set_time,
- .read_alarm = twl4030_rtc_read_alarm,
- .set_alarm = twl4030_rtc_set_alarm,
- .alarm_irq_enable = twl4030_rtc_alarm_irq_enable,
- .update_irq_enable = twl4030_rtc_update_irq_enable,
-};
-
-/*----------------------------------------------------------------------*/
-
-static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
-{
- struct rtc_device *rtc;
- int ret = 0;
- int irq = platform_get_irq(pdev, 0);
- u8 rd_reg;
-
- if (irq <= 0)
- return -EINVAL;
-
- rtc = rtc_device_register(pdev->name,
- &pdev->dev, &twl4030_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
- ret = PTR_ERR(rtc);
- dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
- PTR_ERR(rtc));
- goto out0;
-
- }
-
- platform_set_drvdata(pdev, rtc);
-
- ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
- if (ret < 0)
- goto out1;
-
- if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
- dev_warn(&pdev->dev, "Power up reset detected.\n");
-
- if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
- dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");
-
- /* Clear RTC Power up reset and pending alarm interrupts */
- ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
- if (ret < 0)
- goto out1;
-
- ret = request_irq(irq, twl4030_rtc_interrupt,
- IRQF_TRIGGER_RISING,
- dev_name(&rtc->dev), rtc);
- if (ret < 0) {
- dev_err(&pdev->dev, "IRQ is not free.\n");
- goto out1;
- }
-
- /* Check RTC module status, Enable if it is off */
- ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
- if (ret < 0)
- goto out2;
-
- if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) {
- dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n");
- rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M;
- ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG);
- if (ret < 0)
- goto out2;
- }
-
- /* init cached IRQ enable bits */
- ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
- if (ret < 0)
- goto out2;
-
- return ret;
-
-out2:
- free_irq(irq, rtc);
-out1:
- rtc_device_unregister(rtc);
-out0:
- return ret;
-}
-
-/*
- * Disable all TWL4030 RTC module interrupts.
- * Sets status flag to free.
- */
-static int __devexit twl4030_rtc_remove(struct platform_device *pdev)
-{
- /* leave rtc running, but disable irqs */
- struct rtc_device *rtc = platform_get_drvdata(pdev);
- int irq = platform_get_irq(pdev, 0);
-
- mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
- mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
-
- free_irq(irq, rtc);
-
- rtc_device_unregister(rtc);
- platform_set_drvdata(pdev, NULL);
- return 0;
-}
-
-static void twl4030_rtc_shutdown(struct platform_device *pdev)
-{
- /* mask timer interrupts, but leave alarm interrupts on to enable
- power-on when alarm is triggered */
- mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
-}
-
-#ifdef CONFIG_PM
-
-static unsigned char irqstat;
-
-static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state)
-{
- irqstat = rtc_irq_bits;
-
- mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
- return 0;
-}
-
-static int twl4030_rtc_resume(struct platform_device *pdev)
-{
- set_rtc_irq_bit(irqstat);
- return 0;
-}
-
-#else
-#define twl4030_rtc_suspend NULL
-#define twl4030_rtc_resume NULL
-#endif
-
-MODULE_ALIAS("platform:twl4030_rtc");
-
-static struct platform_driver twl4030rtc_driver = {
- .probe = twl4030_rtc_probe,
- .remove = __devexit_p(twl4030_rtc_remove),
- .shutdown = twl4030_rtc_shutdown,
- .suspend = twl4030_rtc_suspend,
- .resume = twl4030_rtc_resume,
- .driver = {
- .owner = THIS_MODULE,
- .name = "twl4030_rtc",
- },
-};
-
-static int __init twl4030_rtc_init(void)
-{
- return platform_driver_register(&twl4030rtc_driver);
-}
-module_init(twl4030_rtc_init);
-
-static void __exit twl4030_rtc_exit(void)
-{
- platform_driver_unregister(&twl4030rtc_driver);
-}
-module_exit(twl4030_rtc_exit);
-
-MODULE_AUTHOR("Texas Instruments, MontaVista Software");
-MODULE_LICENSE("GPL");
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/otg.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#include <plat/mux.h>
#include <asm/mach-types.h>
#include <linux/platform_device.h>
#include <linux/miscdevice.h>
#include <linux/uaccess.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#define TWL4030_WATCHDOG_CFG_REG_OFFS 0x3
--- /dev/null
+/*
+ * twl4030.h - header for TWL4030 PM and audio CODEC device
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __TWL4030_H_
+#define __TWL4030_H_
+
+#include <linux/types.h>
+#include <linux/input/matrix_keypad.h>
+
+/*
+ * Using the twl4030 core we address registers using a pair
+ * { module id, relative register offset }
+ * which that core then maps to the relevant
+ * { i2c slave, absolute register address }
+ *
+ * The module IDs are meaningful only to the twl4030 core code,
+ * which uses them as array indices to look up the first register
+ * address each module uses within a given i2c slave.
+ */
+
+/* Slave 0 (i2c address 0x48) */
+#define TWL4030_MODULE_USB 0x00
+
+/* Slave 1 (i2c address 0x49) */
+#define TWL4030_MODULE_AUDIO_VOICE 0x01
+#define TWL4030_MODULE_GPIO 0x02
+#define TWL4030_MODULE_INTBR 0x03
+#define TWL4030_MODULE_PIH 0x04
+#define TWL4030_MODULE_TEST 0x05
+
+/* Slave 2 (i2c address 0x4a) */
+#define TWL4030_MODULE_KEYPAD 0x06
+#define TWL4030_MODULE_MADC 0x07
+#define TWL4030_MODULE_INTERRUPTS 0x08
+#define TWL4030_MODULE_LED 0x09
+#define TWL4030_MODULE_MAIN_CHARGE 0x0A
+#define TWL4030_MODULE_PRECHARGE 0x0B
+#define TWL4030_MODULE_PWM0 0x0C
+#define TWL4030_MODULE_PWM1 0x0D
+#define TWL4030_MODULE_PWMA 0x0E
+#define TWL4030_MODULE_PWMB 0x0F
+
+#define TWL5031_MODULE_ACCESSORY 0x10
+#define TWL5031_MODULE_INTERRUPTS 0x11
+
+/* Slave 3 (i2c address 0x4b) */
+#define TWL4030_MODULE_BACKUP 0x12
+#define TWL4030_MODULE_INT 0x13
+#define TWL4030_MODULE_PM_MASTER 0x14
+#define TWL4030_MODULE_PM_RECEIVER 0x15
+#define TWL4030_MODULE_RTC 0x16
+#define TWL4030_MODULE_SECURED_REG 0x17
+
+/*
+ * Read and write single 8-bit registers
+ */
+int twl4030_i2c_write_u8(u8 mod_no, u8 val, u8 reg);
+int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg);
+
+/*
+ * Read and write several 8-bit registers at once.
+ *
+ * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1
+ * for the value, and populate your data starting at offset 1.
+ */
+int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
+int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * NOTE: at up to 1024 registers, this is a big chip.
+ *
+ * Avoid putting register declarations in this file, instead of into
+ * a driver-private file, unless some of the registers in a block
+ * need to be shared with other drivers. One example is blocks that
+ * have Secondary IRQ Handler (SIH) registers.
+ */
+
+#define TWL4030_SIH_CTRL_EXCLEN_MASK BIT(0)
+#define TWL4030_SIH_CTRL_PENDDIS_MASK BIT(1)
+#define TWL4030_SIH_CTRL_COR_MASK BIT(2)
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * GPIO Block Register offsets (use TWL4030_MODULE_GPIO)
+ */
+
+#define REG_GPIODATAIN1 0x0
+#define REG_GPIODATAIN2 0x1
+#define REG_GPIODATAIN3 0x2
+#define REG_GPIODATADIR1 0x3
+#define REG_GPIODATADIR2 0x4
+#define REG_GPIODATADIR3 0x5
+#define REG_GPIODATAOUT1 0x6
+#define REG_GPIODATAOUT2 0x7
+#define REG_GPIODATAOUT3 0x8
+#define REG_CLEARGPIODATAOUT1 0x9
+#define REG_CLEARGPIODATAOUT2 0xA
+#define REG_CLEARGPIODATAOUT3 0xB
+#define REG_SETGPIODATAOUT1 0xC
+#define REG_SETGPIODATAOUT2 0xD
+#define REG_SETGPIODATAOUT3 0xE
+#define REG_GPIO_DEBEN1 0xF
+#define REG_GPIO_DEBEN2 0x10
+#define REG_GPIO_DEBEN3 0x11
+#define REG_GPIO_CTRL 0x12
+#define REG_GPIOPUPDCTR1 0x13
+#define REG_GPIOPUPDCTR2 0x14
+#define REG_GPIOPUPDCTR3 0x15
+#define REG_GPIOPUPDCTR4 0x16
+#define REG_GPIOPUPDCTR5 0x17
+#define REG_GPIO_ISR1A 0x19
+#define REG_GPIO_ISR2A 0x1A
+#define REG_GPIO_ISR3A 0x1B
+#define REG_GPIO_IMR1A 0x1C
+#define REG_GPIO_IMR2A 0x1D
+#define REG_GPIO_IMR3A 0x1E
+#define REG_GPIO_ISR1B 0x1F
+#define REG_GPIO_ISR2B 0x20
+#define REG_GPIO_ISR3B 0x21
+#define REG_GPIO_IMR1B 0x22
+#define REG_GPIO_IMR2B 0x23
+#define REG_GPIO_IMR3B 0x24
+#define REG_GPIO_EDR1 0x28
+#define REG_GPIO_EDR2 0x29
+#define REG_GPIO_EDR3 0x2A
+#define REG_GPIO_EDR4 0x2B
+#define REG_GPIO_EDR5 0x2C
+#define REG_GPIO_SIH_CTRL 0x2D
+
+/* Up to 18 signals are available as GPIOs, when their
+ * pins are not assigned to another use (such as ULPI/USB).
+ */
+#define TWL4030_GPIO_MAX 18
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Keypad register offsets (use TWL4030_MODULE_KEYPAD)
+ * ... SIH/interrupt only
+ */
+
+#define TWL4030_KEYPAD_KEYP_ISR1 0x11
+#define TWL4030_KEYPAD_KEYP_IMR1 0x12
+#define TWL4030_KEYPAD_KEYP_ISR2 0x13
+#define TWL4030_KEYPAD_KEYP_IMR2 0x14
+#define TWL4030_KEYPAD_KEYP_SIR 0x15 /* test register */
+#define TWL4030_KEYPAD_KEYP_EDR 0x16
+#define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Multichannel ADC register offsets (use TWL4030_MODULE_MADC)
+ * ... SIH/interrupt only
+ */
+
+#define TWL4030_MADC_ISR1 0x61
+#define TWL4030_MADC_IMR1 0x62
+#define TWL4030_MADC_ISR2 0x63
+#define TWL4030_MADC_IMR2 0x64
+#define TWL4030_MADC_SIR 0x65 /* test register */
+#define TWL4030_MADC_EDR 0x66
+#define TWL4030_MADC_SIH_CTRL 0x67
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS)
+ */
+
+#define TWL4030_INTERRUPTS_BCIISR1A 0x0
+#define TWL4030_INTERRUPTS_BCIISR2A 0x1
+#define TWL4030_INTERRUPTS_BCIIMR1A 0x2
+#define TWL4030_INTERRUPTS_BCIIMR2A 0x3
+#define TWL4030_INTERRUPTS_BCIISR1B 0x4
+#define TWL4030_INTERRUPTS_BCIISR2B 0x5
+#define TWL4030_INTERRUPTS_BCIIMR1B 0x6
+#define TWL4030_INTERRUPTS_BCIIMR2B 0x7
+#define TWL4030_INTERRUPTS_BCISIR1 0x8 /* test register */
+#define TWL4030_INTERRUPTS_BCISIR2 0x9 /* test register */
+#define TWL4030_INTERRUPTS_BCIEDR1 0xa
+#define TWL4030_INTERRUPTS_BCIEDR2 0xb
+#define TWL4030_INTERRUPTS_BCIEDR3 0xc
+#define TWL4030_INTERRUPTS_BCISIHCTRL 0xd
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Power Interrupt block register offsets (use TWL4030_MODULE_INT)
+ */
+
+#define TWL4030_INT_PWR_ISR1 0x0
+#define TWL4030_INT_PWR_IMR1 0x1
+#define TWL4030_INT_PWR_ISR2 0x2
+#define TWL4030_INT_PWR_IMR2 0x3
+#define TWL4030_INT_PWR_SIR 0x4 /* test register */
+#define TWL4030_INT_PWR_EDR1 0x5
+#define TWL4030_INT_PWR_EDR2 0x6
+#define TWL4030_INT_PWR_SIH_CTRL 0x7
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Accessory Interrupts
+ */
+#define TWL5031_ACIIMR_LSB 0x05
+#define TWL5031_ACIIMR_MSB 0x06
+#define TWL5031_ACIIDR_LSB 0x07
+#define TWL5031_ACIIDR_MSB 0x08
+#define TWL5031_ACCISR1 0x0F
+#define TWL5031_ACCIMR1 0x10
+#define TWL5031_ACCISR2 0x11
+#define TWL5031_ACCIMR2 0x12
+#define TWL5031_ACCSIR 0x13
+#define TWL5031_ACCEDR1 0x14
+#define TWL5031_ACCSIHCTRL 0x15
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Battery Charger Controller
+ */
+
+#define TWL5031_INTERRUPTS_BCIISR1 0x0
+#define TWL5031_INTERRUPTS_BCIIMR1 0x1
+#define TWL5031_INTERRUPTS_BCIISR2 0x2
+#define TWL5031_INTERRUPTS_BCIIMR2 0x3
+#define TWL5031_INTERRUPTS_BCISIR 0x4
+#define TWL5031_INTERRUPTS_BCIEDR1 0x5
+#define TWL5031_INTERRUPTS_BCIEDR2 0x6
+#define TWL5031_INTERRUPTS_BCISIHCTRL 0x7
+
+/*----------------------------------------------------------------------*/
+
+/* Power bus message definitions */
+
+/* The TWL4030/5030 splits its power-management resources (the various
+ * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
+ * P3. These groups can then be configured to transition between sleep, wait-on
+ * and active states by sending messages to the power bus. See Section 5.4.2
+ * Power Resources of TWL4030 TRM
+ */
+
+/* Processor groups */
+#define DEV_GRP_NULL 0x0
+#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */
+#define DEV_GRP_P2 0x2 /* P2: all Modem devices */
+#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */
+
+/* Resource groups */
+#define RES_GRP_RES 0x0 /* Reserved */
+#define RES_GRP_PP 0x1 /* Power providers */
+#define RES_GRP_RC 0x2 /* Reset and control */
+#define RES_GRP_PP_RC 0x3
+#define RES_GRP_PR 0x4 /* Power references */
+#define RES_GRP_PP_PR 0x5
+#define RES_GRP_RC_PR 0x6
+#define RES_GRP_ALL 0x7 /* All resource groups */
+
+#define RES_TYPE2_R0 0x0
+
+#define RES_TYPE_ALL 0x7
+
+/* Resource states */
+#define RES_STATE_WRST 0xF
+#define RES_STATE_ACTIVE 0xE
+#define RES_STATE_SLEEP 0x8
+#define RES_STATE_OFF 0x0
+
+/* Power resources */
+
+/* Power providers */
+#define RES_VAUX1 1
+#define RES_VAUX2 2
+#define RES_VAUX3 3
+#define RES_VAUX4 4
+#define RES_VMMC1 5
+#define RES_VMMC2 6
+#define RES_VPLL1 7
+#define RES_VPLL2 8
+#define RES_VSIM 9
+#define RES_VDAC 10
+#define RES_VINTANA1 11
+#define RES_VINTANA2 12
+#define RES_VINTDIG 13
+#define RES_VIO 14
+#define RES_VDD1 15
+#define RES_VDD2 16
+#define RES_VUSB_1V5 17
+#define RES_VUSB_1V8 18
+#define RES_VUSB_3V1 19
+#define RES_VUSBCP 20
+#define RES_REGEN 21
+/* Reset and control */
+#define RES_NRES_PWRON 22
+#define RES_CLKEN 23
+#define RES_SYSEN 24
+#define RES_HFCLKOUT 25
+#define RES_32KCLKOUT 26
+#define RES_RESET 27
+/* Power Reference */
+#define RES_Main_Ref 28
+
+#define TOTAL_RESOURCES 28
+/*
+ * Power Bus Message Format ... these can be sent individually by Linux,
+ * but are usually part of downloaded scripts that are run when various
+ * power events are triggered.
+ *
+ * Broadcast Message (16 Bits):
+ * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4]
+ * RES_STATE[3:0]
+ *
+ * Singular Message (16 Bits):
+ * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0]
+ */
+
+#define MSG_BROADCAST(devgrp, grp, type, type2, state) \
+ ( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
+ | (type) << 4 | (state))
+
+#define MSG_SINGULAR(devgrp, id, state) \
+ ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
+
+/*----------------------------------------------------------------------*/
+
+struct twl4030_clock_init_data {
+ bool ck32k_lowpwr_enable;
+};
+
+struct twl4030_bci_platform_data {
+ int *battery_tmp_tbl;
+ unsigned int tblsize;
+};
+
+/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
+struct twl4030_gpio_platform_data {
+ int gpio_base;
+ unsigned irq_base, irq_end;
+
+ /* package the two LED signals as output-only GPIOs? */
+ bool use_leds;
+
+ /* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */
+ u8 mmc_cd;
+
+ /* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */
+ u32 debounce;
+
+ /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup
+ * should be enabled. Else, if that bit is set in "pulldowns",
+ * that pulldown is enabled. Don't waste power by letting any
+ * digital inputs float...
+ */
+ u32 pullups;
+ u32 pulldowns;
+
+ int (*setup)(struct device *dev,
+ unsigned gpio, unsigned ngpio);
+ int (*teardown)(struct device *dev,
+ unsigned gpio, unsigned ngpio);
+};
+
+struct twl4030_madc_platform_data {
+ int irq_line;
+};
+
+/* Boards have uniqe mappings of {row, col} --> keycode.
+ * Column and row are 8 bits each, but range only from 0..7.
+ * a PERSISTENT_KEY is "always on" and never reported.
+ */
+#define PERSISTENT_KEY(r, c) KEY((r), (c), KEY_RESERVED)
+
+struct twl4030_keypad_data {
+ const struct matrix_keymap_data *keymap_data;
+ unsigned rows;
+ unsigned cols;
+ bool rep;
+};
+
+enum twl4030_usb_mode {
+ T2_USB_MODE_ULPI = 1,
+ T2_USB_MODE_CEA2011_3PIN = 2,
+};
+
+struct twl4030_usb_data {
+ enum twl4030_usb_mode usb_mode;
+};
+
+struct twl4030_ins {
+ u16 pmb_message;
+ u8 delay;
+};
+
+struct twl4030_script {
+ struct twl4030_ins *script;
+ unsigned size;
+ u8 flags;
+#define TWL4030_WRST_SCRIPT (1<<0)
+#define TWL4030_WAKEUP12_SCRIPT (1<<1)
+#define TWL4030_WAKEUP3_SCRIPT (1<<2)
+#define TWL4030_SLEEP_SCRIPT (1<<3)
+};
+
+struct twl4030_resconfig {
+ u8 resource;
+ u8 devgroup; /* Processor group that Power resource belongs to */
+ u8 type; /* Power resource addressed, 6 / broadcast message */
+ u8 type2; /* Power resource addressed, 3 / broadcast message */
+ u8 remap_off; /* off state remapping */
+ u8 remap_sleep; /* sleep state remapping */
+};
+
+struct twl4030_power_data {
+ struct twl4030_script **scripts;
+ unsigned num;
+ struct twl4030_resconfig *resource_config;
+#define TWL4030_RESCONFIG_UNDEF ((u8)-1)
+};
+
+extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
+
+struct twl4030_codec_audio_data {
+ unsigned int audio_mclk;
+ unsigned int ramp_delay_value;
+ unsigned int hs_extmute:1;
+ void (*set_hs_extmute)(int mute);
+};
+
+struct twl4030_codec_vibra_data {
+ unsigned int audio_mclk;
+ unsigned int coexist;
+};
+
+struct twl4030_codec_data {
+ unsigned int audio_mclk;
+ struct twl4030_codec_audio_data *audio;
+ struct twl4030_codec_vibra_data *vibra;
+};
+
+struct twl4030_platform_data {
+ unsigned irq_base, irq_end;
+ struct twl4030_clock_init_data *clock;
+ struct twl4030_bci_platform_data *bci;
+ struct twl4030_gpio_platform_data *gpio;
+ struct twl4030_madc_platform_data *madc;
+ struct twl4030_keypad_data *keypad;
+ struct twl4030_usb_data *usb;
+ struct twl4030_power_data *power;
+ struct twl4030_codec_data *codec;
+
+ /* LDO regulators */
+ struct regulator_init_data *vdac;
+ struct regulator_init_data *vpll1;
+ struct regulator_init_data *vpll2;
+ struct regulator_init_data *vmmc1;
+ struct regulator_init_data *vmmc2;
+ struct regulator_init_data *vsim;
+ struct regulator_init_data *vaux1;
+ struct regulator_init_data *vaux2;
+ struct regulator_init_data *vaux3;
+ struct regulator_init_data *vaux4;
+ struct regulator_init_data *vio;
+ struct regulator_init_data *vdd1;
+ struct regulator_init_data *vdd2;
+ struct regulator_init_data *vintana1;
+ struct regulator_init_data *vintana2;
+ struct regulator_init_data *vintdig;
+};
+
+/*----------------------------------------------------------------------*/
+
+int twl4030_sih_setup(int module);
+
+/* Offsets to Power Registers */
+#define TWL4030_VDAC_DEV_GRP 0x3B
+#define TWL4030_VDAC_DEDICATED 0x3E
+#define TWL4030_VAUX1_DEV_GRP 0x17
+#define TWL4030_VAUX1_DEDICATED 0x1A
+#define TWL4030_VAUX2_DEV_GRP 0x1B
+#define TWL4030_VAUX2_DEDICATED 0x1E
+#define TWL4030_VAUX3_DEV_GRP 0x1F
+#define TWL4030_VAUX3_DEDICATED 0x22
+
+#if defined(CONFIG_TWL4030_BCI_BATTERY) || \
+ defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
+ extern int twl4030charger_usb_en(int enable);
+#else
+ static inline int twl4030charger_usb_en(int enable) { return 0; }
+#endif
+
+/*----------------------------------------------------------------------*/
+
+/* Linux-specific regulator identifiers ... for now, we only support
+ * the LDOs, and leave the three buck converters alone. VDD1 and VDD2
+ * need to tie into hardware based voltage scaling (cpufreq etc), while
+ * VIO is generally fixed.
+ */
+
+/* EXTERNAL dc-to-dc buck converters */
+#define TWL4030_REG_VDD1 0
+#define TWL4030_REG_VDD2 1
+#define TWL4030_REG_VIO 2
+
+/* EXTERNAL LDOs */
+#define TWL4030_REG_VDAC 3
+#define TWL4030_REG_VPLL1 4
+#define TWL4030_REG_VPLL2 5 /* not on all chips */
+#define TWL4030_REG_VMMC1 6
+#define TWL4030_REG_VMMC2 7 /* not on all chips */
+#define TWL4030_REG_VSIM 8 /* not on all chips */
+#define TWL4030_REG_VAUX1 9 /* not on all chips */
+#define TWL4030_REG_VAUX2_4030 10 /* (twl4030-specific) */
+#define TWL4030_REG_VAUX2 11 /* (twl5030 and newer) */
+#define TWL4030_REG_VAUX3 12 /* not on all chips */
+#define TWL4030_REG_VAUX4 13 /* not on all chips */
+
+/* INTERNAL LDOs */
+#define TWL4030_REG_VINTANA1 14
+#define TWL4030_REG_VINTANA2 15
+#define TWL4030_REG_VINTDIG 16
+#define TWL4030_REG_VUSB1V5 17
+#define TWL4030_REG_VUSB1V8 18
+#define TWL4030_REG_VUSB3V1 19
+
+#endif /* End of __TWL4030_H */
+++ /dev/null
-/*
- * twl4030.h - header for TWL4030 PM and audio CODEC device
- *
- * Copyright (C) 2005-2006 Texas Instruments, Inc.
- *
- * Based on tlv320aic23.c:
- * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __TWL4030_H_
-#define __TWL4030_H_
-
-#include <linux/types.h>
-#include <linux/input/matrix_keypad.h>
-
-/*
- * Using the twl4030 core we address registers using a pair
- * { module id, relative register offset }
- * which that core then maps to the relevant
- * { i2c slave, absolute register address }
- *
- * The module IDs are meaningful only to the twl4030 core code,
- * which uses them as array indices to look up the first register
- * address each module uses within a given i2c slave.
- */
-
-/* Slave 0 (i2c address 0x48) */
-#define TWL4030_MODULE_USB 0x00
-
-/* Slave 1 (i2c address 0x49) */
-#define TWL4030_MODULE_AUDIO_VOICE 0x01
-#define TWL4030_MODULE_GPIO 0x02
-#define TWL4030_MODULE_INTBR 0x03
-#define TWL4030_MODULE_PIH 0x04
-#define TWL4030_MODULE_TEST 0x05
-
-/* Slave 2 (i2c address 0x4a) */
-#define TWL4030_MODULE_KEYPAD 0x06
-#define TWL4030_MODULE_MADC 0x07
-#define TWL4030_MODULE_INTERRUPTS 0x08
-#define TWL4030_MODULE_LED 0x09
-#define TWL4030_MODULE_MAIN_CHARGE 0x0A
-#define TWL4030_MODULE_PRECHARGE 0x0B
-#define TWL4030_MODULE_PWM0 0x0C
-#define TWL4030_MODULE_PWM1 0x0D
-#define TWL4030_MODULE_PWMA 0x0E
-#define TWL4030_MODULE_PWMB 0x0F
-
-#define TWL5031_MODULE_ACCESSORY 0x10
-#define TWL5031_MODULE_INTERRUPTS 0x11
-
-/* Slave 3 (i2c address 0x4b) */
-#define TWL4030_MODULE_BACKUP 0x12
-#define TWL4030_MODULE_INT 0x13
-#define TWL4030_MODULE_PM_MASTER 0x14
-#define TWL4030_MODULE_PM_RECEIVER 0x15
-#define TWL4030_MODULE_RTC 0x16
-#define TWL4030_MODULE_SECURED_REG 0x17
-
-/*
- * Read and write single 8-bit registers
- */
-int twl4030_i2c_write_u8(u8 mod_no, u8 val, u8 reg);
-int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg);
-
-/*
- * Read and write several 8-bit registers at once.
- *
- * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1
- * for the value, and populate your data starting at offset 1.
- */
-int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
-int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
-
-/*----------------------------------------------------------------------*/
-
-/*
- * NOTE: at up to 1024 registers, this is a big chip.
- *
- * Avoid putting register declarations in this file, instead of into
- * a driver-private file, unless some of the registers in a block
- * need to be shared with other drivers. One example is blocks that
- * have Secondary IRQ Handler (SIH) registers.
- */
-
-#define TWL4030_SIH_CTRL_EXCLEN_MASK BIT(0)
-#define TWL4030_SIH_CTRL_PENDDIS_MASK BIT(1)
-#define TWL4030_SIH_CTRL_COR_MASK BIT(2)
-
-/*----------------------------------------------------------------------*/
-
-/*
- * GPIO Block Register offsets (use TWL4030_MODULE_GPIO)
- */
-
-#define REG_GPIODATAIN1 0x0
-#define REG_GPIODATAIN2 0x1
-#define REG_GPIODATAIN3 0x2
-#define REG_GPIODATADIR1 0x3
-#define REG_GPIODATADIR2 0x4
-#define REG_GPIODATADIR3 0x5
-#define REG_GPIODATAOUT1 0x6
-#define REG_GPIODATAOUT2 0x7
-#define REG_GPIODATAOUT3 0x8
-#define REG_CLEARGPIODATAOUT1 0x9
-#define REG_CLEARGPIODATAOUT2 0xA
-#define REG_CLEARGPIODATAOUT3 0xB
-#define REG_SETGPIODATAOUT1 0xC
-#define REG_SETGPIODATAOUT2 0xD
-#define REG_SETGPIODATAOUT3 0xE
-#define REG_GPIO_DEBEN1 0xF
-#define REG_GPIO_DEBEN2 0x10
-#define REG_GPIO_DEBEN3 0x11
-#define REG_GPIO_CTRL 0x12
-#define REG_GPIOPUPDCTR1 0x13
-#define REG_GPIOPUPDCTR2 0x14
-#define REG_GPIOPUPDCTR3 0x15
-#define REG_GPIOPUPDCTR4 0x16
-#define REG_GPIOPUPDCTR5 0x17
-#define REG_GPIO_ISR1A 0x19
-#define REG_GPIO_ISR2A 0x1A
-#define REG_GPIO_ISR3A 0x1B
-#define REG_GPIO_IMR1A 0x1C
-#define REG_GPIO_IMR2A 0x1D
-#define REG_GPIO_IMR3A 0x1E
-#define REG_GPIO_ISR1B 0x1F
-#define REG_GPIO_ISR2B 0x20
-#define REG_GPIO_ISR3B 0x21
-#define REG_GPIO_IMR1B 0x22
-#define REG_GPIO_IMR2B 0x23
-#define REG_GPIO_IMR3B 0x24
-#define REG_GPIO_EDR1 0x28
-#define REG_GPIO_EDR2 0x29
-#define REG_GPIO_EDR3 0x2A
-#define REG_GPIO_EDR4 0x2B
-#define REG_GPIO_EDR5 0x2C
-#define REG_GPIO_SIH_CTRL 0x2D
-
-/* Up to 18 signals are available as GPIOs, when their
- * pins are not assigned to another use (such as ULPI/USB).
- */
-#define TWL4030_GPIO_MAX 18
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Keypad register offsets (use TWL4030_MODULE_KEYPAD)
- * ... SIH/interrupt only
- */
-
-#define TWL4030_KEYPAD_KEYP_ISR1 0x11
-#define TWL4030_KEYPAD_KEYP_IMR1 0x12
-#define TWL4030_KEYPAD_KEYP_ISR2 0x13
-#define TWL4030_KEYPAD_KEYP_IMR2 0x14
-#define TWL4030_KEYPAD_KEYP_SIR 0x15 /* test register */
-#define TWL4030_KEYPAD_KEYP_EDR 0x16
-#define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Multichannel ADC register offsets (use TWL4030_MODULE_MADC)
- * ... SIH/interrupt only
- */
-
-#define TWL4030_MADC_ISR1 0x61
-#define TWL4030_MADC_IMR1 0x62
-#define TWL4030_MADC_ISR2 0x63
-#define TWL4030_MADC_IMR2 0x64
-#define TWL4030_MADC_SIR 0x65 /* test register */
-#define TWL4030_MADC_EDR 0x66
-#define TWL4030_MADC_SIH_CTRL 0x67
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS)
- */
-
-#define TWL4030_INTERRUPTS_BCIISR1A 0x0
-#define TWL4030_INTERRUPTS_BCIISR2A 0x1
-#define TWL4030_INTERRUPTS_BCIIMR1A 0x2
-#define TWL4030_INTERRUPTS_BCIIMR2A 0x3
-#define TWL4030_INTERRUPTS_BCIISR1B 0x4
-#define TWL4030_INTERRUPTS_BCIISR2B 0x5
-#define TWL4030_INTERRUPTS_BCIIMR1B 0x6
-#define TWL4030_INTERRUPTS_BCIIMR2B 0x7
-#define TWL4030_INTERRUPTS_BCISIR1 0x8 /* test register */
-#define TWL4030_INTERRUPTS_BCISIR2 0x9 /* test register */
-#define TWL4030_INTERRUPTS_BCIEDR1 0xa
-#define TWL4030_INTERRUPTS_BCIEDR2 0xb
-#define TWL4030_INTERRUPTS_BCIEDR3 0xc
-#define TWL4030_INTERRUPTS_BCISIHCTRL 0xd
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Power Interrupt block register offsets (use TWL4030_MODULE_INT)
- */
-
-#define TWL4030_INT_PWR_ISR1 0x0
-#define TWL4030_INT_PWR_IMR1 0x1
-#define TWL4030_INT_PWR_ISR2 0x2
-#define TWL4030_INT_PWR_IMR2 0x3
-#define TWL4030_INT_PWR_SIR 0x4 /* test register */
-#define TWL4030_INT_PWR_EDR1 0x5
-#define TWL4030_INT_PWR_EDR2 0x6
-#define TWL4030_INT_PWR_SIH_CTRL 0x7
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Accessory Interrupts
- */
-#define TWL5031_ACIIMR_LSB 0x05
-#define TWL5031_ACIIMR_MSB 0x06
-#define TWL5031_ACIIDR_LSB 0x07
-#define TWL5031_ACIIDR_MSB 0x08
-#define TWL5031_ACCISR1 0x0F
-#define TWL5031_ACCIMR1 0x10
-#define TWL5031_ACCISR2 0x11
-#define TWL5031_ACCIMR2 0x12
-#define TWL5031_ACCSIR 0x13
-#define TWL5031_ACCEDR1 0x14
-#define TWL5031_ACCSIHCTRL 0x15
-
-/*----------------------------------------------------------------------*/
-
-/*
- * Battery Charger Controller
- */
-
-#define TWL5031_INTERRUPTS_BCIISR1 0x0
-#define TWL5031_INTERRUPTS_BCIIMR1 0x1
-#define TWL5031_INTERRUPTS_BCIISR2 0x2
-#define TWL5031_INTERRUPTS_BCIIMR2 0x3
-#define TWL5031_INTERRUPTS_BCISIR 0x4
-#define TWL5031_INTERRUPTS_BCIEDR1 0x5
-#define TWL5031_INTERRUPTS_BCIEDR2 0x6
-#define TWL5031_INTERRUPTS_BCISIHCTRL 0x7
-
-/*----------------------------------------------------------------------*/
-
-/* Power bus message definitions */
-
-/* The TWL4030/5030 splits its power-management resources (the various
- * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
- * P3. These groups can then be configured to transition between sleep, wait-on
- * and active states by sending messages to the power bus. See Section 5.4.2
- * Power Resources of TWL4030 TRM
- */
-
-/* Processor groups */
-#define DEV_GRP_NULL 0x0
-#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */
-#define DEV_GRP_P2 0x2 /* P2: all Modem devices */
-#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */
-
-/* Resource groups */
-#define RES_GRP_RES 0x0 /* Reserved */
-#define RES_GRP_PP 0x1 /* Power providers */
-#define RES_GRP_RC 0x2 /* Reset and control */
-#define RES_GRP_PP_RC 0x3
-#define RES_GRP_PR 0x4 /* Power references */
-#define RES_GRP_PP_PR 0x5
-#define RES_GRP_RC_PR 0x6
-#define RES_GRP_ALL 0x7 /* All resource groups */
-
-#define RES_TYPE2_R0 0x0
-
-#define RES_TYPE_ALL 0x7
-
-/* Resource states */
-#define RES_STATE_WRST 0xF
-#define RES_STATE_ACTIVE 0xE
-#define RES_STATE_SLEEP 0x8
-#define RES_STATE_OFF 0x0
-
-/* Power resources */
-
-/* Power providers */
-#define RES_VAUX1 1
-#define RES_VAUX2 2
-#define RES_VAUX3 3
-#define RES_VAUX4 4
-#define RES_VMMC1 5
-#define RES_VMMC2 6
-#define RES_VPLL1 7
-#define RES_VPLL2 8
-#define RES_VSIM 9
-#define RES_VDAC 10
-#define RES_VINTANA1 11
-#define RES_VINTANA2 12
-#define RES_VINTDIG 13
-#define RES_VIO 14
-#define RES_VDD1 15
-#define RES_VDD2 16
-#define RES_VUSB_1V5 17
-#define RES_VUSB_1V8 18
-#define RES_VUSB_3V1 19
-#define RES_VUSBCP 20
-#define RES_REGEN 21
-/* Reset and control */
-#define RES_NRES_PWRON 22
-#define RES_CLKEN 23
-#define RES_SYSEN 24
-#define RES_HFCLKOUT 25
-#define RES_32KCLKOUT 26
-#define RES_RESET 27
-/* Power Reference */
-#define RES_Main_Ref 28
-
-#define TOTAL_RESOURCES 28
-/*
- * Power Bus Message Format ... these can be sent individually by Linux,
- * but are usually part of downloaded scripts that are run when various
- * power events are triggered.
- *
- * Broadcast Message (16 Bits):
- * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4]
- * RES_STATE[3:0]
- *
- * Singular Message (16 Bits):
- * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0]
- */
-
-#define MSG_BROADCAST(devgrp, grp, type, type2, state) \
- ( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
- | (type) << 4 | (state))
-
-#define MSG_SINGULAR(devgrp, id, state) \
- ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
-
-/*----------------------------------------------------------------------*/
-
-struct twl4030_clock_init_data {
- bool ck32k_lowpwr_enable;
-};
-
-struct twl4030_bci_platform_data {
- int *battery_tmp_tbl;
- unsigned int tblsize;
-};
-
-/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
-struct twl4030_gpio_platform_data {
- int gpio_base;
- unsigned irq_base, irq_end;
-
- /* package the two LED signals as output-only GPIOs? */
- bool use_leds;
-
- /* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */
- u8 mmc_cd;
-
- /* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */
- u32 debounce;
-
- /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup
- * should be enabled. Else, if that bit is set in "pulldowns",
- * that pulldown is enabled. Don't waste power by letting any
- * digital inputs float...
- */
- u32 pullups;
- u32 pulldowns;
-
- int (*setup)(struct device *dev,
- unsigned gpio, unsigned ngpio);
- int (*teardown)(struct device *dev,
- unsigned gpio, unsigned ngpio);
-};
-
-struct twl4030_madc_platform_data {
- int irq_line;
-};
-
-/* Boards have uniqe mappings of {row, col} --> keycode.
- * Column and row are 8 bits each, but range only from 0..7.
- * a PERSISTENT_KEY is "always on" and never reported.
- */
-#define PERSISTENT_KEY(r, c) KEY((r), (c), KEY_RESERVED)
-
-struct twl4030_keypad_data {
- const struct matrix_keymap_data *keymap_data;
- unsigned rows;
- unsigned cols;
- bool rep;
-};
-
-enum twl4030_usb_mode {
- T2_USB_MODE_ULPI = 1,
- T2_USB_MODE_CEA2011_3PIN = 2,
-};
-
-struct twl4030_usb_data {
- enum twl4030_usb_mode usb_mode;
-};
-
-struct twl4030_ins {
- u16 pmb_message;
- u8 delay;
-};
-
-struct twl4030_script {
- struct twl4030_ins *script;
- unsigned size;
- u8 flags;
-#define TWL4030_WRST_SCRIPT (1<<0)
-#define TWL4030_WAKEUP12_SCRIPT (1<<1)
-#define TWL4030_WAKEUP3_SCRIPT (1<<2)
-#define TWL4030_SLEEP_SCRIPT (1<<3)
-};
-
-struct twl4030_resconfig {
- u8 resource;
- u8 devgroup; /* Processor group that Power resource belongs to */
- u8 type; /* Power resource addressed, 6 / broadcast message */
- u8 type2; /* Power resource addressed, 3 / broadcast message */
- u8 remap_off; /* off state remapping */
- u8 remap_sleep; /* sleep state remapping */
-};
-
-struct twl4030_power_data {
- struct twl4030_script **scripts;
- unsigned num;
- struct twl4030_resconfig *resource_config;
-#define TWL4030_RESCONFIG_UNDEF ((u8)-1)
-};
-
-extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
-
-struct twl4030_codec_audio_data {
- unsigned int audio_mclk;
- unsigned int ramp_delay_value;
- unsigned int hs_extmute:1;
- void (*set_hs_extmute)(int mute);
-};
-
-struct twl4030_codec_vibra_data {
- unsigned int audio_mclk;
- unsigned int coexist;
-};
-
-struct twl4030_codec_data {
- unsigned int audio_mclk;
- struct twl4030_codec_audio_data *audio;
- struct twl4030_codec_vibra_data *vibra;
-};
-
-struct twl4030_platform_data {
- unsigned irq_base, irq_end;
- struct twl4030_clock_init_data *clock;
- struct twl4030_bci_platform_data *bci;
- struct twl4030_gpio_platform_data *gpio;
- struct twl4030_madc_platform_data *madc;
- struct twl4030_keypad_data *keypad;
- struct twl4030_usb_data *usb;
- struct twl4030_power_data *power;
- struct twl4030_codec_data *codec;
-
- /* LDO regulators */
- struct regulator_init_data *vdac;
- struct regulator_init_data *vpll1;
- struct regulator_init_data *vpll2;
- struct regulator_init_data *vmmc1;
- struct regulator_init_data *vmmc2;
- struct regulator_init_data *vsim;
- struct regulator_init_data *vaux1;
- struct regulator_init_data *vaux2;
- struct regulator_init_data *vaux3;
- struct regulator_init_data *vaux4;
- struct regulator_init_data *vio;
- struct regulator_init_data *vdd1;
- struct regulator_init_data *vdd2;
- struct regulator_init_data *vintana1;
- struct regulator_init_data *vintana2;
- struct regulator_init_data *vintdig;
-};
-
-/*----------------------------------------------------------------------*/
-
-int twl4030_sih_setup(int module);
-
-/* Offsets to Power Registers */
-#define TWL4030_VDAC_DEV_GRP 0x3B
-#define TWL4030_VDAC_DEDICATED 0x3E
-#define TWL4030_VAUX1_DEV_GRP 0x17
-#define TWL4030_VAUX1_DEDICATED 0x1A
-#define TWL4030_VAUX2_DEV_GRP 0x1B
-#define TWL4030_VAUX2_DEDICATED 0x1E
-#define TWL4030_VAUX3_DEV_GRP 0x1F
-#define TWL4030_VAUX3_DEDICATED 0x22
-
-#if defined(CONFIG_TWL4030_BCI_BATTERY) || \
- defined(CONFIG_TWL4030_BCI_BATTERY_MODULE)
- extern int twl4030charger_usb_en(int enable);
-#else
- static inline int twl4030charger_usb_en(int enable) { return 0; }
-#endif
-
-/*----------------------------------------------------------------------*/
-
-/* Linux-specific regulator identifiers ... for now, we only support
- * the LDOs, and leave the three buck converters alone. VDD1 and VDD2
- * need to tie into hardware based voltage scaling (cpufreq etc), while
- * VIO is generally fixed.
- */
-
-/* EXTERNAL dc-to-dc buck converters */
-#define TWL4030_REG_VDD1 0
-#define TWL4030_REG_VDD2 1
-#define TWL4030_REG_VIO 2
-
-/* EXTERNAL LDOs */
-#define TWL4030_REG_VDAC 3
-#define TWL4030_REG_VPLL1 4
-#define TWL4030_REG_VPLL2 5 /* not on all chips */
-#define TWL4030_REG_VMMC1 6
-#define TWL4030_REG_VMMC2 7 /* not on all chips */
-#define TWL4030_REG_VSIM 8 /* not on all chips */
-#define TWL4030_REG_VAUX1 9 /* not on all chips */
-#define TWL4030_REG_VAUX2_4030 10 /* (twl4030-specific) */
-#define TWL4030_REG_VAUX2 11 /* (twl5030 and newer) */
-#define TWL4030_REG_VAUX3 12 /* not on all chips */
-#define TWL4030_REG_VAUX4 13 /* not on all chips */
-
-/* INTERNAL LDOs */
-#define TWL4030_REG_VINTANA1 14
-#define TWL4030_REG_VINTANA2 15
-#define TWL4030_REG_VINTDIG 16
-#define TWL4030_REG_VUSB1V5 17
-#define TWL4030_REG_VUSB1V8 18
-#define TWL4030_REG_VUSB3V1 19
-
-#endif /* End of __TWL4030_H */
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
projects / deliverable / linux.git / commitdiff
