the questions about this class of network devices. If you say Y, you
will be asked for your specific device in the following questions.
-config XILINX_EMACLITE
- tristate "Xilinx 10/100 Ethernet Lite support"
- depends on PPC32 || MICROBLAZE
- select PHYLIB
- help
- This driver supports the 10/100 Ethernet Lite from Xilinx.
-
config LANTIQ_ETOP
tristate "Lantiq SoC ETOP driver"
depends on SOC_TYPE_XWAY
To compile this driver as a module, choose M here: the module
will be called ipg. This is recommended.
-config XILINX_LL_TEMAC
- tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
- depends on PPC || MICROBLAZE
- select PHYLIB
- help
- This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
- core used in Xilinx Spartan and Virtex FPGAs
-
endif # NETDEV_1000
#
obj-$(CONFIG_HP100) += hp100.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
-ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
-obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
-obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
-
obj-$(CONFIG_PPP) += ppp_generic.o
obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
source "drivers/net/ethernet/toshiba/Kconfig"
source "drivers/net/ethernet/tundra/Kconfig"
source "drivers/net/ethernet/via/Kconfig"
+source "drivers/net/ethernet/xilinx/Kconfig"
endif # ETHERNET
obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
obj-$(CONFIG_NET_VENDOR_VIA) += via/
+obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
--- /dev/null
+#
+# Xilink device configuration
+#
+
+config NET_VENDOR_XILINX
+ bool "Xilinx devices"
+ depends on PPC || PPC32 || MICROBLAZE
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Xilinx devices. If you say Y, you will be asked
+ for your specific card in the following questions.
+
+if NET_VENDOR_XILINX
+
+config XILINX_EMACLITE
+ tristate "Xilinx 10/100 Ethernet Lite support"
+ depends on (PPC32 || MICROBLAZE)
+ select PHYLIB
+ ---help---
+ This driver supports the 10/100 Ethernet Lite from Xilinx.
+
+config XILINX_LL_TEMAC
+ tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
+ depends on (PPC || MICROBLAZE)
+ select PHYLIB
+ ---help---
+ This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
+ core used in Xilinx Spartan and Virtex FPGAs
+
+endif # NET_VENDOR_XILINX
--- /dev/null
+#
+# Makefile for the Xilink network device drivers.
+#
+
+ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
+obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
+obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
--- /dev/null
+
+#ifndef XILINX_LL_TEMAC_H
+#define XILINX_LL_TEMAC_H
+
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+
+#ifdef CONFIG_PPC_DCR
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#endif
+
+/* packet size info */
+#define XTE_HDR_SIZE 14 /* size of Ethernet header */
+#define XTE_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */
+#define XTE_JUMBO_MTU 9000
+#define XTE_MAX_JUMBO_FRAME_SIZE (XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE)
+
+/* Configuration options */
+
+/* Accept all incoming packets.
+ * This option defaults to disabled (cleared) */
+#define XTE_OPTION_PROMISC (1 << 0)
+/* Jumbo frame support for Tx & Rx.
+ * This option defaults to disabled (cleared) */
+#define XTE_OPTION_JUMBO (1 << 1)
+/* VLAN Rx & Tx frame support.
+ * This option defaults to disabled (cleared) */
+#define XTE_OPTION_VLAN (1 << 2)
+/* Enable recognition of flow control frames on Rx
+ * This option defaults to enabled (set) */
+#define XTE_OPTION_FLOW_CONTROL (1 << 4)
+/* Strip FCS and PAD from incoming frames.
+ * Note: PAD from VLAN frames is not stripped.
+ * This option defaults to disabled (set) */
+#define XTE_OPTION_FCS_STRIP (1 << 5)
+/* Generate FCS field and add PAD automatically for outgoing frames.
+ * This option defaults to enabled (set) */
+#define XTE_OPTION_FCS_INSERT (1 << 6)
+/* Enable Length/Type error checking for incoming frames. When this option is
+set, the MAC will filter frames that have a mismatched type/length field
+and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
+types of frames are encountered. When this option is cleared, the MAC will
+allow these types of frames to be received.
+This option defaults to enabled (set) */
+#define XTE_OPTION_LENTYPE_ERR (1 << 7)
+/* Enable the transmitter.
+ * This option defaults to enabled (set) */
+#define XTE_OPTION_TXEN (1 << 11)
+/* Enable the receiver
+* This option defaults to enabled (set) */
+#define XTE_OPTION_RXEN (1 << 12)
+
+/* Default options set when device is initialized or reset */
+#define XTE_OPTION_DEFAULTS \
+ (XTE_OPTION_TXEN | \
+ XTE_OPTION_FLOW_CONTROL | \
+ XTE_OPTION_RXEN)
+
+/* XPS_LL_TEMAC SDMA registers definition */
+
+#define TX_NXTDESC_PTR 0x00 /* r */
+#define TX_CURBUF_ADDR 0x01 /* r */
+#define TX_CURBUF_LENGTH 0x02 /* r */
+#define TX_CURDESC_PTR 0x03 /* rw */
+#define TX_TAILDESC_PTR 0x04 /* rw */
+#define TX_CHNL_CTRL 0x05 /* rw */
+/*
+ 0:7 24:31 IRQTimeout
+ 8:15 16:23 IRQCount
+ 16:20 11:15 Reserved
+ 21 10 0
+ 22 9 UseIntOnEnd
+ 23 8 LdIRQCnt
+ 24 7 IRQEn
+ 25:28 3:6 Reserved
+ 29 2 IrqErrEn
+ 30 1 IrqDlyEn
+ 31 0 IrqCoalEn
+*/
+#define CHNL_CTRL_IRQ_IOE (1 << 9)
+#define CHNL_CTRL_IRQ_EN (1 << 7)
+#define CHNL_CTRL_IRQ_ERR_EN (1 << 2)
+#define CHNL_CTRL_IRQ_DLY_EN (1 << 1)
+#define CHNL_CTRL_IRQ_COAL_EN (1 << 0)
+#define TX_IRQ_REG 0x06 /* rw */
+/*
+ 0:7 24:31 DltTmrValue
+ 8:15 16:23 ClscCntrValue
+ 16:17 14:15 Reserved
+ 18:21 10:13 ClscCnt
+ 22:23 8:9 DlyCnt
+ 24:28 3::7 Reserved
+ 29 2 ErrIrq
+ 30 1 DlyIrq
+ 31 0 CoalIrq
+ */
+#define TX_CHNL_STS 0x07 /* r */
+/*
+ 0:9 22:31 Reserved
+ 10 21 TailPErr
+ 11 20 CmpErr
+ 12 19 AddrErr
+ 13 18 NxtPErr
+ 14 17 CurPErr
+ 15 16 BsyWr
+ 16:23 8:15 Reserved
+ 24 7 Error
+ 25 6 IOE
+ 26 5 SOE
+ 27 4 Cmplt
+ 28 3 SOP
+ 29 2 EOP
+ 30 1 EngBusy
+ 31 0 Reserved
+*/
+
+#define RX_NXTDESC_PTR 0x08 /* r */
+#define RX_CURBUF_ADDR 0x09 /* r */
+#define RX_CURBUF_LENGTH 0x0a /* r */
+#define RX_CURDESC_PTR 0x0b /* rw */
+#define RX_TAILDESC_PTR 0x0c /* rw */
+#define RX_CHNL_CTRL 0x0d /* rw */
+/*
+ 0:7 24:31 IRQTimeout
+ 8:15 16:23 IRQCount
+ 16:20 11:15 Reserved
+ 21 10 0
+ 22 9 UseIntOnEnd
+ 23 8 LdIRQCnt
+ 24 7 IRQEn
+ 25:28 3:6 Reserved
+ 29 2 IrqErrEn
+ 30 1 IrqDlyEn
+ 31 0 IrqCoalEn
+ */
+#define RX_IRQ_REG 0x0e /* rw */
+#define IRQ_COAL (1 << 0)
+#define IRQ_DLY (1 << 1)
+#define IRQ_ERR (1 << 2)
+#define IRQ_DMAERR (1 << 7) /* this is not documented ??? */
+/*
+ 0:7 24:31 DltTmrValue
+ 8:15 16:23 ClscCntrValue
+ 16:17 14:15 Reserved
+ 18:21 10:13 ClscCnt
+ 22:23 8:9 DlyCnt
+ 24:28 3::7 Reserved
+*/
+#define RX_CHNL_STS 0x0f /* r */
+#define CHNL_STS_ENGBUSY (1 << 1)
+#define CHNL_STS_EOP (1 << 2)
+#define CHNL_STS_SOP (1 << 3)
+#define CHNL_STS_CMPLT (1 << 4)
+#define CHNL_STS_SOE (1 << 5)
+#define CHNL_STS_IOE (1 << 6)
+#define CHNL_STS_ERR (1 << 7)
+
+#define CHNL_STS_BSYWR (1 << 16)
+#define CHNL_STS_CURPERR (1 << 17)
+#define CHNL_STS_NXTPERR (1 << 18)
+#define CHNL_STS_ADDRERR (1 << 19)
+#define CHNL_STS_CMPERR (1 << 20)
+#define CHNL_STS_TAILERR (1 << 21)
+/*
+ 0:9 22:31 Reserved
+ 10 21 TailPErr
+ 11 20 CmpErr
+ 12 19 AddrErr
+ 13 18 NxtPErr
+ 14 17 CurPErr
+ 15 16 BsyWr
+ 16:23 8:15 Reserved
+ 24 7 Error
+ 25 6 IOE
+ 26 5 SOE
+ 27 4 Cmplt
+ 28 3 SOP
+ 29 2 EOP
+ 30 1 EngBusy
+ 31 0 Reserved
+*/
+
+#define DMA_CONTROL_REG 0x10 /* rw */
+#define DMA_CONTROL_RST (1 << 0)
+#define DMA_TAIL_ENABLE (1 << 2)
+
+/* XPS_LL_TEMAC direct registers definition */
+
+#define XTE_RAF0_OFFSET 0x00
+#define RAF0_RST (1 << 0)
+#define RAF0_MCSTREJ (1 << 1)
+#define RAF0_BCSTREJ (1 << 2)
+#define XTE_TPF0_OFFSET 0x04
+#define XTE_IFGP0_OFFSET 0x08
+#define XTE_ISR0_OFFSET 0x0c
+#define ISR0_HARDACSCMPLT (1 << 0)
+#define ISR0_AUTONEG (1 << 1)
+#define ISR0_RXCMPLT (1 << 2)
+#define ISR0_RXREJ (1 << 3)
+#define ISR0_RXFIFOOVR (1 << 4)
+#define ISR0_TXCMPLT (1 << 5)
+#define ISR0_RXDCMLCK (1 << 6)
+
+#define XTE_IPR0_OFFSET 0x10
+#define XTE_IER0_OFFSET 0x14
+
+#define XTE_MSW0_OFFSET 0x20
+#define XTE_LSW0_OFFSET 0x24
+#define XTE_CTL0_OFFSET 0x28
+#define XTE_RDY0_OFFSET 0x2c
+
+#define XTE_RSE_MIIM_RR_MASK 0x0002
+#define XTE_RSE_MIIM_WR_MASK 0x0004
+#define XTE_RSE_CFG_RR_MASK 0x0020
+#define XTE_RSE_CFG_WR_MASK 0x0040
+#define XTE_RDY0_HARD_ACS_RDY_MASK (0x10000)
+
+/* XPS_LL_TEMAC indirect registers offset definition */
+
+#define XTE_RXC0_OFFSET 0x00000200 /* Rx configuration word 0 */
+#define XTE_RXC1_OFFSET 0x00000240 /* Rx configuration word 1 */
+#define XTE_RXC1_RXRST_MASK (1 << 31) /* Receiver reset */
+#define XTE_RXC1_RXJMBO_MASK (1 << 30) /* Jumbo frame enable */
+#define XTE_RXC1_RXFCS_MASK (1 << 29) /* FCS not stripped */
+#define XTE_RXC1_RXEN_MASK (1 << 28) /* Receiver enable */
+#define XTE_RXC1_RXVLAN_MASK (1 << 27) /* VLAN enable */
+#define XTE_RXC1_RXHD_MASK (1 << 26) /* Half duplex */
+#define XTE_RXC1_RXLT_MASK (1 << 25) /* Length/type check disable */
+
+#define XTE_TXC_OFFSET 0x00000280 /* Tx configuration */
+#define XTE_TXC_TXRST_MASK (1 << 31) /* Transmitter reset */
+#define XTE_TXC_TXJMBO_MASK (1 << 30) /* Jumbo frame enable */
+#define XTE_TXC_TXFCS_MASK (1 << 29) /* Generate FCS */
+#define XTE_TXC_TXEN_MASK (1 << 28) /* Transmitter enable */
+#define XTE_TXC_TXVLAN_MASK (1 << 27) /* VLAN enable */
+#define XTE_TXC_TXHD_MASK (1 << 26) /* Half duplex */
+
+#define XTE_FCC_OFFSET 0x000002C0 /* Flow control config */
+#define XTE_FCC_RXFLO_MASK (1 << 29) /* Rx flow control enable */
+#define XTE_FCC_TXFLO_MASK (1 << 30) /* Tx flow control enable */
+
+#define XTE_EMCFG_OFFSET 0x00000300 /* EMAC configuration */
+#define XTE_EMCFG_LINKSPD_MASK 0xC0000000 /* Link speed */
+#define XTE_EMCFG_HOSTEN_MASK (1 << 26) /* Host interface enable */
+#define XTE_EMCFG_LINKSPD_10 0x00000000 /* 10 Mbit LINKSPD_MASK */
+#define XTE_EMCFG_LINKSPD_100 (1 << 30) /* 100 Mbit LINKSPD_MASK */
+#define XTE_EMCFG_LINKSPD_1000 (1 << 31) /* 1000 Mbit LINKSPD_MASK */
+
+#define XTE_GMIC_OFFSET 0x00000320 /* RGMII/SGMII config */
+#define XTE_MC_OFFSET 0x00000340 /* MDIO configuration */
+#define XTE_UAW0_OFFSET 0x00000380 /* Unicast address word 0 */
+#define XTE_UAW1_OFFSET 0x00000384 /* Unicast address word 1 */
+
+#define XTE_MAW0_OFFSET 0x00000388 /* Multicast addr word 0 */
+#define XTE_MAW1_OFFSET 0x0000038C /* Multicast addr word 1 */
+#define XTE_AFM_OFFSET 0x00000390 /* Promiscuous mode */
+#define XTE_AFM_EPPRM_MASK (1 << 31) /* Promiscuous mode enable */
+
+/* Interrupt Request status */
+#define XTE_TIS_OFFSET 0x000003A0
+#define TIS_FRIS (1 << 0)
+#define TIS_MRIS (1 << 1)
+#define TIS_MWIS (1 << 2)
+#define TIS_ARIS (1 << 3)
+#define TIS_AWIS (1 << 4)
+#define TIS_CRIS (1 << 5)
+#define TIS_CWIS (1 << 6)
+
+#define XTE_TIE_OFFSET 0x000003A4 /* Interrupt enable */
+
+/** MII Mamagement Control register (MGTCR) */
+#define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */
+#define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */
+
+#define CNTLREG_WRITE_ENABLE_MASK 0x8000
+#define CNTLREG_EMAC1SEL_MASK 0x0400
+#define CNTLREG_ADDRESSCODE_MASK 0x03ff
+
+/* CDMAC descriptor status bit definitions */
+
+#define STS_CTRL_APP0_ERR (1 << 31)
+#define STS_CTRL_APP0_IRQONEND (1 << 30)
+/* undoccumented */
+#define STS_CTRL_APP0_STOPONEND (1 << 29)
+#define STS_CTRL_APP0_CMPLT (1 << 28)
+#define STS_CTRL_APP0_SOP (1 << 27)
+#define STS_CTRL_APP0_EOP (1 << 26)
+#define STS_CTRL_APP0_ENGBUSY (1 << 25)
+/* undocumented */
+#define STS_CTRL_APP0_ENGRST (1 << 24)
+
+#define TX_CONTROL_CALC_CSUM_MASK 1
+
+#define MULTICAST_CAM_TABLE_NUM 4
+
+/* TEMAC Synthesis features */
+#define TEMAC_FEATURE_RX_CSUM (1 << 0)
+#define TEMAC_FEATURE_TX_CSUM (1 << 1)
+
+/* TX/RX CURDESC_PTR points to first descriptor */
+/* TX/RX TAILDESC_PTR points to last descriptor in linked list */
+
+/**
+ * struct cdmac_bd - LocalLink buffer descriptor format
+ *
+ * app0 bits:
+ * 0 Error
+ * 1 IrqOnEnd generate an interrupt at completion of DMA op
+ * 2 reserved
+ * 3 completed Current descriptor completed
+ * 4 SOP TX - marks first desc/ RX marks first desct
+ * 5 EOP TX marks last desc/RX marks last desc
+ * 6 EngBusy DMA is processing
+ * 7 reserved
+ * 8:31 application specific
+ */
+struct cdmac_bd {
+ u32 next; /* Physical address of next buffer descriptor */
+ u32 phys;
+ u32 len;
+ u32 app0;
+ u32 app1; /* TX start << 16 | insert */
+ u32 app2; /* TX csum */
+ u32 app3;
+ u32 app4; /* skb for TX length for RX */
+};
+
+struct temac_local {
+ struct net_device *ndev;
+ struct device *dev;
+
+ /* Connection to PHY device */
+ struct phy_device *phy_dev; /* Pointer to PHY device */
+ struct device_node *phy_node;
+
+ /* MDIO bus data */
+ struct mii_bus *mii_bus; /* MII bus reference */
+ int mdio_irqs[PHY_MAX_ADDR]; /* IRQs table for MDIO bus */
+
+ /* IO registers, dma functions and IRQs */
+ void __iomem *regs;
+ void __iomem *sdma_regs;
+#ifdef CONFIG_PPC_DCR
+ dcr_host_t sdma_dcrs;
+#endif
+ u32 (*dma_in)(struct temac_local *, int);
+ void (*dma_out)(struct temac_local *, int, u32);
+
+ int tx_irq;
+ int rx_irq;
+ int emac_num;
+
+ struct sk_buff **rx_skb;
+ spinlock_t rx_lock;
+ struct mutex indirect_mutex;
+ u32 options; /* Current options word */
+ int last_link;
+ unsigned int temac_features;
+
+ /* Buffer descriptors */
+ struct cdmac_bd *tx_bd_v;
+ dma_addr_t tx_bd_p;
+ struct cdmac_bd *rx_bd_v;
+ dma_addr_t rx_bd_p;
+ int tx_bd_ci;
+ int tx_bd_next;
+ int tx_bd_tail;
+ int rx_bd_ci;
+};
+
+/* xilinx_temac.c */
+u32 temac_ior(struct temac_local *lp, int offset);
+void temac_iow(struct temac_local *lp, int offset, u32 value);
+int temac_indirect_busywait(struct temac_local *lp);
+u32 temac_indirect_in32(struct temac_local *lp, int reg);
+void temac_indirect_out32(struct temac_local *lp, int reg, u32 value);
+
+
+/* xilinx_temac_mdio.c */
+int temac_mdio_setup(struct temac_local *lp, struct device_node *np);
+void temac_mdio_teardown(struct temac_local *lp);
+
+#endif /* XILINX_LL_TEMAC_H */
--- /dev/null
+/*
+ * Driver for Xilinx TEMAC Ethernet device
+ *
+ * Copyright (c) 2008 Nissin Systems Co., Ltd., Yoshio Kashiwagi
+ * Copyright (c) 2005-2008 DLA Systems, David H. Lynch Jr. <dhlii@dlasys.net>
+ * Copyright (c) 2008-2009 Secret Lab Technologies Ltd.
+ *
+ * This is a driver for the Xilinx ll_temac ipcore which is often used
+ * in the Virtex and Spartan series of chips.
+ *
+ * Notes:
+ * - The ll_temac hardware uses indirect access for many of the TEMAC
+ * registers, include the MDIO bus. However, indirect access to MDIO
+ * registers take considerably more clock cycles than to TEMAC registers.
+ * MDIO accesses are long, so threads doing them should probably sleep
+ * rather than busywait. However, since only one indirect access can be
+ * in progress at any given time, that means that *all* indirect accesses
+ * could end up sleeping (to wait for an MDIO access to complete).
+ * Fortunately none of the indirect accesses are on the 'hot' path for tx
+ * or rx, so this should be okay.
+ *
+ * TODO:
+ * - Factor out locallink DMA code into separate driver
+ * - Fix multicast assignment.
+ * - Fix support for hardware checksumming.
+ * - Testing. Lots and lots of testing.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/tcp.h> /* needed for sizeof(tcphdr) */
+#include <linux/udp.h> /* needed for sizeof(udphdr) */
+#include <linux/phy.h>
+#include <linux/in.h>
+#include <linux/io.h>
+#include <linux/ip.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+
+#include "ll_temac.h"
+
+#define TX_BD_NUM 64
+#define RX_BD_NUM 128
+
+/* ---------------------------------------------------------------------
+ * Low level register access functions
+ */
+
+u32 temac_ior(struct temac_local *lp, int offset)
+{
+ return in_be32((u32 *)(lp->regs + offset));
+}
+
+void temac_iow(struct temac_local *lp, int offset, u32 value)
+{
+ out_be32((u32 *) (lp->regs + offset), value);
+}
+
+int temac_indirect_busywait(struct temac_local *lp)
+{
+ long end = jiffies + 2;
+
+ while (!(temac_ior(lp, XTE_RDY0_OFFSET) & XTE_RDY0_HARD_ACS_RDY_MASK)) {
+ if (end - jiffies <= 0) {
+ WARN_ON(1);
+ return -ETIMEDOUT;
+ }
+ msleep(1);
+ }
+ return 0;
+}
+
+/**
+ * temac_indirect_in32
+ *
+ * lp->indirect_mutex must be held when calling this function
+ */
+u32 temac_indirect_in32(struct temac_local *lp, int reg)
+{
+ u32 val;
+
+ if (temac_indirect_busywait(lp))
+ return -ETIMEDOUT;
+ temac_iow(lp, XTE_CTL0_OFFSET, reg);
+ if (temac_indirect_busywait(lp))
+ return -ETIMEDOUT;
+ val = temac_ior(lp, XTE_LSW0_OFFSET);
+
+ return val;
+}
+
+/**
+ * temac_indirect_out32
+ *
+ * lp->indirect_mutex must be held when calling this function
+ */
+void temac_indirect_out32(struct temac_local *lp, int reg, u32 value)
+{
+ if (temac_indirect_busywait(lp))
+ return;
+ temac_iow(lp, XTE_LSW0_OFFSET, value);
+ temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
+}
+
+/**
+ * temac_dma_in32 - Memory mapped DMA read, this function expects a
+ * register input that is based on DCR word addresses which
+ * are then converted to memory mapped byte addresses
+ */
+static u32 temac_dma_in32(struct temac_local *lp, int reg)
+{
+ return in_be32((u32 *)(lp->sdma_regs + (reg << 2)));
+}
+
+/**
+ * temac_dma_out32 - Memory mapped DMA read, this function expects a
+ * register input that is based on DCR word addresses which
+ * are then converted to memory mapped byte addresses
+ */
+static void temac_dma_out32(struct temac_local *lp, int reg, u32 value)
+{
+ out_be32((u32 *)(lp->sdma_regs + (reg << 2)), value);
+}
+
+/* DMA register access functions can be DCR based or memory mapped.
+ * The PowerPC 440 is DCR based, the PowerPC 405 and MicroBlaze are both
+ * memory mapped.
+ */
+#ifdef CONFIG_PPC_DCR
+
+/**
+ * temac_dma_dcr_in32 - DCR based DMA read
+ */
+static u32 temac_dma_dcr_in(struct temac_local *lp, int reg)
+{
+ return dcr_read(lp->sdma_dcrs, reg);
+}
+
+/**
+ * temac_dma_dcr_out32 - DCR based DMA write
+ */
+static void temac_dma_dcr_out(struct temac_local *lp, int reg, u32 value)
+{
+ dcr_write(lp->sdma_dcrs, reg, value);
+}
+
+/**
+ * temac_dcr_setup - If the DMA is DCR based, then setup the address and
+ * I/O functions
+ */
+static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op,
+ struct device_node *np)
+{
+ unsigned int dcrs;
+
+ /* setup the dcr address mapping if it's in the device tree */
+
+ dcrs = dcr_resource_start(np, 0);
+ if (dcrs != 0) {
+ lp->sdma_dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
+ lp->dma_in = temac_dma_dcr_in;
+ lp->dma_out = temac_dma_dcr_out;
+ dev_dbg(&op->dev, "DCR base: %x\n", dcrs);
+ return 0;
+ }
+ /* no DCR in the device tree, indicate a failure */
+ return -1;
+}
+
+#else
+
+/*
+ * temac_dcr_setup - This is a stub for when DCR is not supported,
+ * such as with MicroBlaze
+ */
+static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op,
+ struct device_node *np)
+{
+ return -1;
+}
+
+#endif
+
+/**
+ * * temac_dma_bd_release - Release buffer descriptor rings
+ */
+static void temac_dma_bd_release(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ int i;
+
+ for (i = 0; i < RX_BD_NUM; i++) {
+ if (!lp->rx_skb[i])
+ break;
+ else {
+ dma_unmap_single(ndev->dev.parent, lp->rx_bd_v[i].phys,
+ XTE_MAX_JUMBO_FRAME_SIZE, DMA_FROM_DEVICE);
+ dev_kfree_skb(lp->rx_skb[i]);
+ }
+ }
+ if (lp->rx_bd_v)
+ dma_free_coherent(ndev->dev.parent,
+ sizeof(*lp->rx_bd_v) * RX_BD_NUM,
+ lp->rx_bd_v, lp->rx_bd_p);
+ if (lp->tx_bd_v)
+ dma_free_coherent(ndev->dev.parent,
+ sizeof(*lp->tx_bd_v) * TX_BD_NUM,
+ lp->tx_bd_v, lp->tx_bd_p);
+ if (lp->rx_skb)
+ kfree(lp->rx_skb);
+}
+
+/**
+ * temac_dma_bd_init - Setup buffer descriptor rings
+ */
+static int temac_dma_bd_init(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ struct sk_buff *skb;
+ int i;
+
+ lp->rx_skb = kzalloc(sizeof(*lp->rx_skb) * RX_BD_NUM, GFP_KERNEL);
+ if (!lp->rx_skb) {
+ dev_err(&ndev->dev,
+ "can't allocate memory for DMA RX buffer\n");
+ goto out;
+ }
+ /* allocate the tx and rx ring buffer descriptors. */
+ /* returns a virtual address and a physical address. */
+ lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
+ sizeof(*lp->tx_bd_v) * TX_BD_NUM,
+ &lp->tx_bd_p, GFP_KERNEL);
+ if (!lp->tx_bd_v) {
+ dev_err(&ndev->dev,
+ "unable to allocate DMA TX buffer descriptors");
+ goto out;
+ }
+ lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent,
+ sizeof(*lp->rx_bd_v) * RX_BD_NUM,
+ &lp->rx_bd_p, GFP_KERNEL);
+ if (!lp->rx_bd_v) {
+ dev_err(&ndev->dev,
+ "unable to allocate DMA RX buffer descriptors");
+ goto out;
+ }
+
+ memset(lp->tx_bd_v, 0, sizeof(*lp->tx_bd_v) * TX_BD_NUM);
+ for (i = 0; i < TX_BD_NUM; i++) {
+ lp->tx_bd_v[i].next = lp->tx_bd_p +
+ sizeof(*lp->tx_bd_v) * ((i + 1) % TX_BD_NUM);
+ }
+
+ memset(lp->rx_bd_v, 0, sizeof(*lp->rx_bd_v) * RX_BD_NUM);
+ for (i = 0; i < RX_BD_NUM; i++) {
+ lp->rx_bd_v[i].next = lp->rx_bd_p +
+ sizeof(*lp->rx_bd_v) * ((i + 1) % RX_BD_NUM);
+
+ skb = netdev_alloc_skb_ip_align(ndev,
+ XTE_MAX_JUMBO_FRAME_SIZE);
+
+ if (skb == 0) {
+ dev_err(&ndev->dev, "alloc_skb error %d\n", i);
+ goto out;
+ }
+ lp->rx_skb[i] = skb;
+ /* returns physical address of skb->data */
+ lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent,
+ skb->data,
+ XTE_MAX_JUMBO_FRAME_SIZE,
+ DMA_FROM_DEVICE);
+ lp->rx_bd_v[i].len = XTE_MAX_JUMBO_FRAME_SIZE;
+ lp->rx_bd_v[i].app0 = STS_CTRL_APP0_IRQONEND;
+ }
+
+ lp->dma_out(lp, TX_CHNL_CTRL, 0x10220400 |
+ CHNL_CTRL_IRQ_EN |
+ CHNL_CTRL_IRQ_DLY_EN |
+ CHNL_CTRL_IRQ_COAL_EN);
+ /* 0x10220483 */
+ /* 0x00100483 */
+ lp->dma_out(lp, RX_CHNL_CTRL, 0xff070000 |
+ CHNL_CTRL_IRQ_EN |
+ CHNL_CTRL_IRQ_DLY_EN |
+ CHNL_CTRL_IRQ_COAL_EN |
+ CHNL_CTRL_IRQ_IOE);
+ /* 0xff010283 */
+
+ lp->dma_out(lp, RX_CURDESC_PTR, lp->rx_bd_p);
+ lp->dma_out(lp, RX_TAILDESC_PTR,
+ lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));
+ lp->dma_out(lp, TX_CURDESC_PTR, lp->tx_bd_p);
+
+ return 0;
+
+out:
+ temac_dma_bd_release(ndev);
+ return -ENOMEM;
+}
+
+/* ---------------------------------------------------------------------
+ * net_device_ops
+ */
+
+static int temac_set_mac_address(struct net_device *ndev, void *address)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+
+ if (address)
+ memcpy(ndev->dev_addr, address, ETH_ALEN);
+
+ if (!is_valid_ether_addr(ndev->dev_addr))
+ random_ether_addr(ndev->dev_addr);
+
+ /* set up unicast MAC address filter set its mac address */
+ mutex_lock(&lp->indirect_mutex);
+ temac_indirect_out32(lp, XTE_UAW0_OFFSET,
+ (ndev->dev_addr[0]) |
+ (ndev->dev_addr[1] << 8) |
+ (ndev->dev_addr[2] << 16) |
+ (ndev->dev_addr[3] << 24));
+ /* There are reserved bits in EUAW1
+ * so don't affect them Set MAC bits [47:32] in EUAW1 */
+ temac_indirect_out32(lp, XTE_UAW1_OFFSET,
+ (ndev->dev_addr[4] & 0x000000ff) |
+ (ndev->dev_addr[5] << 8));
+ mutex_unlock(&lp->indirect_mutex);
+
+ return 0;
+}
+
+static int netdev_set_mac_address(struct net_device *ndev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ return temac_set_mac_address(ndev, addr->sa_data);
+}
+
+static void temac_set_multicast_list(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ u32 multi_addr_msw, multi_addr_lsw, val;
+ int i;
+
+ mutex_lock(&lp->indirect_mutex);
+ if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) ||
+ netdev_mc_count(ndev) > MULTICAST_CAM_TABLE_NUM) {
+ /*
+ * We must make the kernel realise we had to move
+ * into promisc mode or we start all out war on
+ * the cable. If it was a promisc request the
+ * flag is already set. If not we assert it.
+ */
+ ndev->flags |= IFF_PROMISC;
+ temac_indirect_out32(lp, XTE_AFM_OFFSET, XTE_AFM_EPPRM_MASK);
+ dev_info(&ndev->dev, "Promiscuous mode enabled.\n");
+ } else if (!netdev_mc_empty(ndev)) {
+ struct netdev_hw_addr *ha;
+
+ i = 0;
+ netdev_for_each_mc_addr(ha, ndev) {
+ if (i >= MULTICAST_CAM_TABLE_NUM)
+ break;
+ multi_addr_msw = ((ha->addr[3] << 24) |
+ (ha->addr[2] << 16) |
+ (ha->addr[1] << 8) |
+ (ha->addr[0]));
+ temac_indirect_out32(lp, XTE_MAW0_OFFSET,
+ multi_addr_msw);
+ multi_addr_lsw = ((ha->addr[5] << 8) |
+ (ha->addr[4]) | (i << 16));
+ temac_indirect_out32(lp, XTE_MAW1_OFFSET,
+ multi_addr_lsw);
+ i++;
+ }
+ } else {
+ val = temac_indirect_in32(lp, XTE_AFM_OFFSET);
+ temac_indirect_out32(lp, XTE_AFM_OFFSET,
+ val & ~XTE_AFM_EPPRM_MASK);
+ temac_indirect_out32(lp, XTE_MAW0_OFFSET, 0);
+ temac_indirect_out32(lp, XTE_MAW1_OFFSET, 0);
+ dev_info(&ndev->dev, "Promiscuous mode disabled.\n");
+ }
+ mutex_unlock(&lp->indirect_mutex);
+}
+
+struct temac_option {
+ int flg;
+ u32 opt;
+ u32 reg;
+ u32 m_or;
+ u32 m_and;
+} temac_options[] = {
+ /* Turn on jumbo packet support for both Rx and Tx */
+ {
+ .opt = XTE_OPTION_JUMBO,
+ .reg = XTE_TXC_OFFSET,
+ .m_or = XTE_TXC_TXJMBO_MASK,
+ },
+ {
+ .opt = XTE_OPTION_JUMBO,
+ .reg = XTE_RXC1_OFFSET,
+ .m_or =XTE_RXC1_RXJMBO_MASK,
+ },
+ /* Turn on VLAN packet support for both Rx and Tx */
+ {
+ .opt = XTE_OPTION_VLAN,
+ .reg = XTE_TXC_OFFSET,
+ .m_or =XTE_TXC_TXVLAN_MASK,
+ },
+ {
+ .opt = XTE_OPTION_VLAN,
+ .reg = XTE_RXC1_OFFSET,
+ .m_or =XTE_RXC1_RXVLAN_MASK,
+ },
+ /* Turn on FCS stripping on receive packets */
+ {
+ .opt = XTE_OPTION_FCS_STRIP,
+ .reg = XTE_RXC1_OFFSET,
+ .m_or =XTE_RXC1_RXFCS_MASK,
+ },
+ /* Turn on FCS insertion on transmit packets */
+ {
+ .opt = XTE_OPTION_FCS_INSERT,
+ .reg = XTE_TXC_OFFSET,
+ .m_or =XTE_TXC_TXFCS_MASK,
+ },
+ /* Turn on length/type field checking on receive packets */
+ {
+ .opt = XTE_OPTION_LENTYPE_ERR,
+ .reg = XTE_RXC1_OFFSET,
+ .m_or =XTE_RXC1_RXLT_MASK,
+ },
+ /* Turn on flow control */
+ {
+ .opt = XTE_OPTION_FLOW_CONTROL,
+ .reg = XTE_FCC_OFFSET,
+ .m_or =XTE_FCC_RXFLO_MASK,
+ },
+ /* Turn on flow control */
+ {
+ .opt = XTE_OPTION_FLOW_CONTROL,
+ .reg = XTE_FCC_OFFSET,
+ .m_or =XTE_FCC_TXFLO_MASK,
+ },
+ /* Turn on promiscuous frame filtering (all frames are received ) */
+ {
+ .opt = XTE_OPTION_PROMISC,
+ .reg = XTE_AFM_OFFSET,
+ .m_or =XTE_AFM_EPPRM_MASK,
+ },
+ /* Enable transmitter if not already enabled */
+ {
+ .opt = XTE_OPTION_TXEN,
+ .reg = XTE_TXC_OFFSET,
+ .m_or =XTE_TXC_TXEN_MASK,
+ },
+ /* Enable receiver? */
+ {
+ .opt = XTE_OPTION_RXEN,
+ .reg = XTE_RXC1_OFFSET,
+ .m_or =XTE_RXC1_RXEN_MASK,
+ },
+ {}
+};
+
+/**
+ * temac_setoptions
+ */
+static u32 temac_setoptions(struct net_device *ndev, u32 options)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ struct temac_option *tp = &temac_options[0];
+ int reg;
+
+ mutex_lock(&lp->indirect_mutex);
+ while (tp->opt) {
+ reg = temac_indirect_in32(lp, tp->reg) & ~tp->m_or;
+ if (options & tp->opt)
+ reg |= tp->m_or;
+ temac_indirect_out32(lp, tp->reg, reg);
+ tp++;
+ }
+ lp->options |= options;
+ mutex_unlock(&lp->indirect_mutex);
+
+ return 0;
+}
+
+/* Initialize temac */
+static void temac_device_reset(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ u32 timeout;
+ u32 val;
+
+ /* Perform a software reset */
+
+ /* 0x300 host enable bit ? */
+ /* reset PHY through control register ?:1 */
+
+ dev_dbg(&ndev->dev, "%s()\n", __func__);
+
+ mutex_lock(&lp->indirect_mutex);
+ /* Reset the receiver and wait for it to finish reset */
+ temac_indirect_out32(lp, XTE_RXC1_OFFSET, XTE_RXC1_RXRST_MASK);
+ timeout = 1000;
+ while (temac_indirect_in32(lp, XTE_RXC1_OFFSET) & XTE_RXC1_RXRST_MASK) {
+ udelay(1);
+ if (--timeout == 0) {
+ dev_err(&ndev->dev,
+ "temac_device_reset RX reset timeout!!\n");
+ break;
+ }
+ }
+
+ /* Reset the transmitter and wait for it to finish reset */
+ temac_indirect_out32(lp, XTE_TXC_OFFSET, XTE_TXC_TXRST_MASK);
+ timeout = 1000;
+ while (temac_indirect_in32(lp, XTE_TXC_OFFSET) & XTE_TXC_TXRST_MASK) {
+ udelay(1);
+ if (--timeout == 0) {
+ dev_err(&ndev->dev,
+ "temac_device_reset TX reset timeout!!\n");
+ break;
+ }
+ }
+
+ /* Disable the receiver */
+ val = temac_indirect_in32(lp, XTE_RXC1_OFFSET);
+ temac_indirect_out32(lp, XTE_RXC1_OFFSET, val & ~XTE_RXC1_RXEN_MASK);
+
+ /* Reset Local Link (DMA) */
+ lp->dma_out(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
+ timeout = 1000;
+ while (lp->dma_in(lp, DMA_CONTROL_REG) & DMA_CONTROL_RST) {
+ udelay(1);
+ if (--timeout == 0) {
+ dev_err(&ndev->dev,
+ "temac_device_reset DMA reset timeout!!\n");
+ break;
+ }
+ }
+ lp->dma_out(lp, DMA_CONTROL_REG, DMA_TAIL_ENABLE);
+
+ if (temac_dma_bd_init(ndev)) {
+ dev_err(&ndev->dev,
+ "temac_device_reset descriptor allocation failed\n");
+ }
+
+ temac_indirect_out32(lp, XTE_RXC0_OFFSET, 0);
+ temac_indirect_out32(lp, XTE_RXC1_OFFSET, 0);
+ temac_indirect_out32(lp, XTE_TXC_OFFSET, 0);
+ temac_indirect_out32(lp, XTE_FCC_OFFSET, XTE_FCC_RXFLO_MASK);
+
+ mutex_unlock(&lp->indirect_mutex);
+
+ /* Sync default options with HW
+ * but leave receiver and transmitter disabled. */
+ temac_setoptions(ndev,
+ lp->options & ~(XTE_OPTION_TXEN | XTE_OPTION_RXEN));
+
+ temac_set_mac_address(ndev, NULL);
+
+ /* Set address filter table */
+ temac_set_multicast_list(ndev);
+ if (temac_setoptions(ndev, lp->options))
+ dev_err(&ndev->dev, "Error setting TEMAC options\n");
+
+ /* Init Driver variable */
+ ndev->trans_start = jiffies; /* prevent tx timeout */
+}
+
+void temac_adjust_link(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ struct phy_device *phy = lp->phy_dev;
+ u32 mii_speed;
+ int link_state;
+
+ /* hash together the state values to decide if something has changed */
+ link_state = phy->speed | (phy->duplex << 1) | phy->link;
+
+ mutex_lock(&lp->indirect_mutex);
+ if (lp->last_link != link_state) {
+ mii_speed = temac_indirect_in32(lp, XTE_EMCFG_OFFSET);
+ mii_speed &= ~XTE_EMCFG_LINKSPD_MASK;
+
+ switch (phy->speed) {
+ case SPEED_1000: mii_speed |= XTE_EMCFG_LINKSPD_1000; break;
+ case SPEED_100: mii_speed |= XTE_EMCFG_LINKSPD_100; break;
+ case SPEED_10: mii_speed |= XTE_EMCFG_LINKSPD_10; break;
+ }
+
+ /* Write new speed setting out to TEMAC */
+ temac_indirect_out32(lp, XTE_EMCFG_OFFSET, mii_speed);
+ lp->last_link = link_state;
+ phy_print_status(phy);
+ }
+ mutex_unlock(&lp->indirect_mutex);
+}
+
+static void temac_start_xmit_done(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ struct cdmac_bd *cur_p;
+ unsigned int stat = 0;
+
+ cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
+ stat = cur_p->app0;
+
+ while (stat & STS_CTRL_APP0_CMPLT) {
+ dma_unmap_single(ndev->dev.parent, cur_p->phys, cur_p->len,
+ DMA_TO_DEVICE);
+ if (cur_p->app4)
+ dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
+ cur_p->app0 = 0;
+ cur_p->app1 = 0;
+ cur_p->app2 = 0;
+ cur_p->app3 = 0;
+ cur_p->app4 = 0;
+
+ ndev->stats.tx_packets++;
+ ndev->stats.tx_bytes += cur_p->len;
+
+ lp->tx_bd_ci++;
+ if (lp->tx_bd_ci >= TX_BD_NUM)
+ lp->tx_bd_ci = 0;
+
+ cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
+ stat = cur_p->app0;
+ }
+
+ netif_wake_queue(ndev);
+}
+
+static inline int temac_check_tx_bd_space(struct temac_local *lp, int num_frag)
+{
+ struct cdmac_bd *cur_p;
+ int tail;
+
+ tail = lp->tx_bd_tail;
+ cur_p = &lp->tx_bd_v[tail];
+
+ do {
+ if (cur_p->app0)
+ return NETDEV_TX_BUSY;
+
+ tail++;
+ if (tail >= TX_BD_NUM)
+ tail = 0;
+
+ cur_p = &lp->tx_bd_v[tail];
+ num_frag--;
+ } while (num_frag >= 0);
+
+ return 0;
+}
+
+static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ struct cdmac_bd *cur_p;
+ dma_addr_t start_p, tail_p;
+ int ii;
+ unsigned long num_frag;
+ skb_frag_t *frag;
+
+ num_frag = skb_shinfo(skb)->nr_frags;
+ frag = &skb_shinfo(skb)->frags[0];
+ start_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
+ cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
+
+ if (temac_check_tx_bd_space(lp, num_frag)) {
+ if (!netif_queue_stopped(ndev)) {
+ netif_stop_queue(ndev);
+ return NETDEV_TX_BUSY;
+ }
+ return NETDEV_TX_BUSY;
+ }
+
+ cur_p->app0 = 0;
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ unsigned int csum_start_off = skb_checksum_start_offset(skb);
+ unsigned int csum_index_off = csum_start_off + skb->csum_offset;
+
+ cur_p->app0 |= 1; /* TX Checksum Enabled */
+ cur_p->app1 = (csum_start_off << 16) | csum_index_off;
+ cur_p->app2 = 0; /* initial checksum seed */
+ }
+
+ cur_p->app0 |= STS_CTRL_APP0_SOP;
+ cur_p->len = skb_headlen(skb);
+ cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ cur_p->app4 = (unsigned long)skb;
+
+ for (ii = 0; ii < num_frag; ii++) {
+ lp->tx_bd_tail++;
+ if (lp->tx_bd_tail >= TX_BD_NUM)
+ lp->tx_bd_tail = 0;
+
+ cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
+ cur_p->phys = dma_map_single(ndev->dev.parent,
+ (void *)page_address(frag->page) +
+ frag->page_offset,
+ frag->size, DMA_TO_DEVICE);
+ cur_p->len = frag->size;
+ cur_p->app0 = 0;
+ frag++;
+ }
+ cur_p->app0 |= STS_CTRL_APP0_EOP;
+
+ tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
+ lp->tx_bd_tail++;
+ if (lp->tx_bd_tail >= TX_BD_NUM)
+ lp->tx_bd_tail = 0;
+
+ skb_tx_timestamp(skb);
+
+ /* Kick off the transfer */
+ lp->dma_out(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
+
+ return NETDEV_TX_OK;
+}
+
+
+static void ll_temac_recv(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ struct sk_buff *skb, *new_skb;
+ unsigned int bdstat;
+ struct cdmac_bd *cur_p;
+ dma_addr_t tail_p;
+ int length;
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->rx_lock, flags);
+
+ tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
+ cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
+
+ bdstat = cur_p->app0;
+ while ((bdstat & STS_CTRL_APP0_CMPLT)) {
+
+ skb = lp->rx_skb[lp->rx_bd_ci];
+ length = cur_p->app4 & 0x3FFF;
+
+ dma_unmap_single(ndev->dev.parent, cur_p->phys, length,
+ DMA_FROM_DEVICE);
+
+ skb_put(skb, length);
+ skb->dev = ndev;
+ skb->protocol = eth_type_trans(skb, ndev);
+ skb_checksum_none_assert(skb);
+
+ /* if we're doing rx csum offload, set it up */
+ if (((lp->temac_features & TEMAC_FEATURE_RX_CSUM) != 0) &&
+ (skb->protocol == __constant_htons(ETH_P_IP)) &&
+ (skb->len > 64)) {
+
+ skb->csum = cur_p->app3 & 0xFFFF;
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ }
+
+ if (!skb_defer_rx_timestamp(skb))
+ netif_rx(skb);
+
+ ndev->stats.rx_packets++;
+ ndev->stats.rx_bytes += length;
+
+ new_skb = netdev_alloc_skb_ip_align(ndev,
+ XTE_MAX_JUMBO_FRAME_SIZE);
+
+ if (new_skb == 0) {
+ dev_err(&ndev->dev, "no memory for new sk_buff\n");
+ spin_unlock_irqrestore(&lp->rx_lock, flags);
+ return;
+ }
+
+ cur_p->app0 = STS_CTRL_APP0_IRQONEND;
+ cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data,
+ XTE_MAX_JUMBO_FRAME_SIZE,
+ DMA_FROM_DEVICE);
+ cur_p->len = XTE_MAX_JUMBO_FRAME_SIZE;
+ lp->rx_skb[lp->rx_bd_ci] = new_skb;
+
+ lp->rx_bd_ci++;
+ if (lp->rx_bd_ci >= RX_BD_NUM)
+ lp->rx_bd_ci = 0;
+
+ cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
+ bdstat = cur_p->app0;
+ }
+ lp->dma_out(lp, RX_TAILDESC_PTR, tail_p);
+
+ spin_unlock_irqrestore(&lp->rx_lock, flags);
+}
+
+static irqreturn_t ll_temac_tx_irq(int irq, void *_ndev)
+{
+ struct net_device *ndev = _ndev;
+ struct temac_local *lp = netdev_priv(ndev);
+ unsigned int status;
+
+ status = lp->dma_in(lp, TX_IRQ_REG);
+ lp->dma_out(lp, TX_IRQ_REG, status);
+
+ if (status & (IRQ_COAL | IRQ_DLY))
+ temac_start_xmit_done(lp->ndev);
+ if (status & 0x080)
+ dev_err(&ndev->dev, "DMA error 0x%x\n", status);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ll_temac_rx_irq(int irq, void *_ndev)
+{
+ struct net_device *ndev = _ndev;
+ struct temac_local *lp = netdev_priv(ndev);
+ unsigned int status;
+
+ /* Read and clear the status registers */
+ status = lp->dma_in(lp, RX_IRQ_REG);
+ lp->dma_out(lp, RX_IRQ_REG, status);
+
+ if (status & (IRQ_COAL | IRQ_DLY))
+ ll_temac_recv(lp->ndev);
+
+ return IRQ_HANDLED;
+}
+
+static int temac_open(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+ int rc;
+
+ dev_dbg(&ndev->dev, "temac_open()\n");
+
+ if (lp->phy_node) {
+ lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
+ temac_adjust_link, 0, 0);
+ if (!lp->phy_dev) {
+ dev_err(lp->dev, "of_phy_connect() failed\n");
+ return -ENODEV;
+ }
+
+ phy_start(lp->phy_dev);
+ }
+
+ rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev);
+ if (rc)
+ goto err_tx_irq;
+ rc = request_irq(lp->rx_irq, ll_temac_rx_irq, 0, ndev->name, ndev);
+ if (rc)
+ goto err_rx_irq;
+
+ temac_device_reset(ndev);
+ return 0;
+
+ err_rx_irq:
+ free_irq(lp->tx_irq, ndev);
+ err_tx_irq:
+ if (lp->phy_dev)
+ phy_disconnect(lp->phy_dev);
+ lp->phy_dev = NULL;
+ dev_err(lp->dev, "request_irq() failed\n");
+ return rc;
+}
+
+static int temac_stop(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+
+ dev_dbg(&ndev->dev, "temac_close()\n");
+
+ free_irq(lp->tx_irq, ndev);
+ free_irq(lp->rx_irq, ndev);
+
+ if (lp->phy_dev)
+ phy_disconnect(lp->phy_dev);
+ lp->phy_dev = NULL;
+
+ temac_dma_bd_release(ndev);
+
+ return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void
+temac_poll_controller(struct net_device *ndev)
+{
+ struct temac_local *lp = netdev_priv(ndev);
+
+ disable_irq(lp->tx_irq);
+ disable_irq(lp->rx_irq);
+
+ ll_temac_rx_irq(lp->tx_irq, ndev);
+ ll_temac_tx_irq(lp->rx_irq, ndev);
+
+ enable_irq(lp->tx_irq);
+ enable_irq(lp->rx_irq);
+}
+#endif
+
+static const struct net_device_ops temac_netdev_ops = {
+ .ndo_open = temac_open,
+ .ndo_stop = temac_stop,
+ .ndo_start_xmit = temac_start_xmit,
+ .ndo_set_mac_address = netdev_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ //.ndo_set_multicast_list = temac_set_multicast_list,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = temac_poll_controller,
+#endif
+};
+
+/* ---------------------------------------------------------------------
+ * SYSFS device attributes
+ */
+static ssize_t temac_show_llink_regs(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct temac_local *lp = netdev_priv(ndev);
+ int i, len = 0;
+
+ for (i = 0; i < 0x11; i++)
+ len += sprintf(buf + len, "%.8x%s", lp->dma_in(lp, i),
+ (i % 8) == 7 ? "\n" : " ");
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+static DEVICE_ATTR(llink_regs, 0440, temac_show_llink_regs, NULL);
+
+static struct attribute *temac_device_attrs[] = {
+ &dev_attr_llink_regs.attr,
+ NULL,
+};
+
+static const struct attribute_group temac_attr_group = {
+ .attrs = temac_device_attrs,
+};
+
+static int __devinit temac_of_probe(struct platform_device *op)
+{
+ struct device_node *np;
+ struct temac_local *lp;
+ struct net_device *ndev;
+ const void *addr;
+ __be32 *p;
+ int size, rc = 0;
+
+ /* Init network device structure */
+ ndev = alloc_etherdev(sizeof(*lp));
+ if (!ndev) {
+ dev_err(&op->dev, "could not allocate device.\n");
+ return -ENOMEM;
+ }
+ ether_setup(ndev);
+ dev_set_drvdata(&op->dev, ndev);
+ SET_NETDEV_DEV(ndev, &op->dev);
+ ndev->flags &= ~IFF_MULTICAST; /* clear multicast */
+ ndev->features = NETIF_F_SG | NETIF_F_FRAGLIST;
+ ndev->netdev_ops = &temac_netdev_ops;
+#if 0
+ ndev->features |= NETIF_F_IP_CSUM; /* Can checksum TCP/UDP over IPv4. */
+ ndev->features |= NETIF_F_HW_CSUM; /* Can checksum all the packets. */
+ ndev->features |= NETIF_F_IPV6_CSUM; /* Can checksum IPV6 TCP/UDP */
+ ndev->features |= NETIF_F_HIGHDMA; /* Can DMA to high memory. */
+ ndev->features |= NETIF_F_HW_VLAN_TX; /* Transmit VLAN hw accel */
+ ndev->features |= NETIF_F_HW_VLAN_RX; /* Receive VLAN hw acceleration */
+ ndev->features |= NETIF_F_HW_VLAN_FILTER; /* Receive VLAN filtering */
+ ndev->features |= NETIF_F_VLAN_CHALLENGED; /* cannot handle VLAN pkts */
+ ndev->features |= NETIF_F_GSO; /* Enable software GSO. */
+ ndev->features |= NETIF_F_MULTI_QUEUE; /* Has multiple TX/RX queues */
+ ndev->features |= NETIF_F_LRO; /* large receive offload */
+#endif
+
+ /* setup temac private info structure */
+ lp = netdev_priv(ndev);
+ lp->ndev = ndev;
+ lp->dev = &op->dev;
+ lp->options = XTE_OPTION_DEFAULTS;
+ spin_lock_init(&lp->rx_lock);
+ mutex_init(&lp->indirect_mutex);
+
+ /* map device registers */
+ lp->regs = of_iomap(op->dev.of_node, 0);
+ if (!lp->regs) {
+ dev_err(&op->dev, "could not map temac regs.\n");
+ goto nodev;
+ }
+
+ /* Setup checksum offload, but default to off if not specified */
+ lp->temac_features = 0;
+ p = (__be32 *)of_get_property(op->dev.of_node, "xlnx,txcsum", NULL);
+ if (p && be32_to_cpu(*p)) {
+ lp->temac_features |= TEMAC_FEATURE_TX_CSUM;
+ /* Can checksum TCP/UDP over IPv4. */
+ ndev->features |= NETIF_F_IP_CSUM;
+ }
+ p = (__be32 *)of_get_property(op->dev.of_node, "xlnx,rxcsum", NULL);
+ if (p && be32_to_cpu(*p))
+ lp->temac_features |= TEMAC_FEATURE_RX_CSUM;
+
+ /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
+ np = of_parse_phandle(op->dev.of_node, "llink-connected", 0);
+ if (!np) {
+ dev_err(&op->dev, "could not find DMA node\n");
+ goto err_iounmap;
+ }
+
+ /* Setup the DMA register accesses, could be DCR or memory mapped */
+ if (temac_dcr_setup(lp, op, np)) {
+
+ /* no DCR in the device tree, try non-DCR */
+ lp->sdma_regs = of_iomap(np, 0);
+ if (lp->sdma_regs) {
+ lp->dma_in = temac_dma_in32;
+ lp->dma_out = temac_dma_out32;
+ dev_dbg(&op->dev, "MEM base: %p\n", lp->sdma_regs);
+ } else {
+ dev_err(&op->dev, "unable to map DMA registers\n");
+ of_node_put(np);
+ goto err_iounmap;
+ }
+ }
+
+ lp->rx_irq = irq_of_parse_and_map(np, 0);
+ lp->tx_irq = irq_of_parse_and_map(np, 1);
+
+ of_node_put(np); /* Finished with the DMA node; drop the reference */
+
+ if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) {
+ dev_err(&op->dev, "could not determine irqs\n");
+ rc = -ENOMEM;
+ goto err_iounmap_2;
+ }
+
+
+ /* Retrieve the MAC address */
+ addr = of_get_property(op->dev.of_node, "local-mac-address", &size);
+ if ((!addr) || (size != 6)) {
+ dev_err(&op->dev, "could not find MAC address\n");
+ rc = -ENODEV;
+ goto err_iounmap_2;
+ }
+ temac_set_mac_address(ndev, (void *)addr);
+
+ rc = temac_mdio_setup(lp, op->dev.of_node);
+ if (rc)
+ dev_warn(&op->dev, "error registering MDIO bus\n");
+
+ lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0);
+ if (lp->phy_node)
+ dev_dbg(lp->dev, "using PHY node %s (%p)\n", np->full_name, np);
+
+ /* Add the device attributes */
+ rc = sysfs_create_group(&lp->dev->kobj, &temac_attr_group);
+ if (rc) {
+ dev_err(lp->dev, "Error creating sysfs files\n");
+ goto err_iounmap_2;
+ }
+
+ rc = register_netdev(lp->ndev);
+ if (rc) {
+ dev_err(lp->dev, "register_netdev() error (%i)\n", rc);
+ goto err_register_ndev;
+ }
+
+ return 0;
+
+ err_register_ndev:
+ sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
+ err_iounmap_2:
+ if (lp->sdma_regs)
+ iounmap(lp->sdma_regs);
+ err_iounmap:
+ iounmap(lp->regs);
+ nodev:
+ free_netdev(ndev);
+ ndev = NULL;
+ return rc;
+}
+
+static int __devexit temac_of_remove(struct platform_device *op)
+{
+ struct net_device *ndev = dev_get_drvdata(&op->dev);
+ struct temac_local *lp = netdev_priv(ndev);
+
+ temac_mdio_teardown(lp);
+ unregister_netdev(ndev);
+ sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
+ if (lp->phy_node)
+ of_node_put(lp->phy_node);
+ lp->phy_node = NULL;
+ dev_set_drvdata(&op->dev, NULL);
+ iounmap(lp->regs);
+ if (lp->sdma_regs)
+ iounmap(lp->sdma_regs);
+ free_netdev(ndev);
+ return 0;
+}
+
+static struct of_device_id temac_of_match[] __devinitdata = {
+ { .compatible = "xlnx,xps-ll-temac-1.01.b", },
+ { .compatible = "xlnx,xps-ll-temac-2.00.a", },
+ { .compatible = "xlnx,xps-ll-temac-2.02.a", },
+ { .compatible = "xlnx,xps-ll-temac-2.03.a", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, temac_of_match);
+
+static struct platform_driver temac_of_driver = {
+ .probe = temac_of_probe,
+ .remove = __devexit_p(temac_of_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "xilinx_temac",
+ .of_match_table = temac_of_match,
+ },
+};
+
+static int __init temac_init(void)
+{
+ return platform_driver_register(&temac_of_driver);
+}
+module_init(temac_init);
+
+static void __exit temac_exit(void)
+{
+ platform_driver_unregister(&temac_of_driver);
+}
+module_exit(temac_exit);
+
+MODULE_DESCRIPTION("Xilinx LL_TEMAC Ethernet driver");
+MODULE_AUTHOR("Yoshio Kashiwagi");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * MDIO bus driver for the Xilinx TEMAC device
+ *
+ * Copyright (c) 2009 Secret Lab Technologies, Ltd.
+ */
+
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/mutex.h>
+#include <linux/phy.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/of_mdio.h>
+
+#include "ll_temac.h"
+
+/* ---------------------------------------------------------------------
+ * MDIO Bus functions
+ */
+static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+ struct temac_local *lp = bus->priv;
+ u32 rc;
+
+ /* Write the PHY address to the MIIM Access Initiator register.
+ * When the transfer completes, the PHY register value will appear
+ * in the LSW0 register */
+ mutex_lock(&lp->indirect_mutex);
+ temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
+ rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET);
+ mutex_unlock(&lp->indirect_mutex);
+
+ dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n",
+ phy_id, reg, rc);
+
+ return rc;
+}
+
+static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
+{
+ struct temac_local *lp = bus->priv;
+
+ dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
+ phy_id, reg, val);
+
+ /* First write the desired value into the write data register
+ * and then write the address into the access initiator register
+ */
+ mutex_lock(&lp->indirect_mutex);
+ temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val);
+ temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
+ mutex_unlock(&lp->indirect_mutex);
+
+ return 0;
+}
+
+int temac_mdio_setup(struct temac_local *lp, struct device_node *np)
+{
+ struct mii_bus *bus;
+ const u32 *bus_hz;
+ int clk_div;
+ int rc, size;
+ struct resource res;
+
+ /* Calculate a reasonable divisor for the clock rate */
+ clk_div = 0x3f; /* worst-case default setting */
+ bus_hz = of_get_property(np, "clock-frequency", &size);
+ if (bus_hz && size >= sizeof(*bus_hz)) {
+ clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1;
+ if (clk_div < 1)
+ clk_div = 1;
+ if (clk_div > 0x3f)
+ clk_div = 0x3f;
+ }
+
+ /* Enable the MDIO bus by asserting the enable bit and writing
+ * in the clock config */
+ mutex_lock(&lp->indirect_mutex);
+ temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
+ mutex_unlock(&lp->indirect_mutex);
+
+ bus = mdiobus_alloc();
+ if (!bus)
+ return -ENOMEM;
+
+ of_address_to_resource(np, 0, &res);
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
+ (unsigned long long)res.start);
+ bus->priv = lp;
+ bus->name = "Xilinx TEMAC MDIO";
+ bus->read = temac_mdio_read;
+ bus->write = temac_mdio_write;
+ bus->parent = lp->dev;
+ bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
+
+ lp->mii_bus = bus;
+
+ rc = of_mdiobus_register(bus, np);
+ if (rc)
+ goto err_register;
+
+ mutex_lock(&lp->indirect_mutex);
+ dev_dbg(lp->dev, "MDIO bus registered; MC:%x\n",
+ temac_indirect_in32(lp, XTE_MC_OFFSET));
+ mutex_unlock(&lp->indirect_mutex);
+ return 0;
+
+ err_register:
+ mdiobus_free(bus);
+ return rc;
+}
+
+void temac_mdio_teardown(struct temac_local *lp)
+{
+ mdiobus_unregister(lp->mii_bus);
+ kfree(lp->mii_bus->irq);
+ mdiobus_free(lp->mii_bus);
+ lp->mii_bus = NULL;
+}
+
--- /dev/null
+/*
+ * Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device.
+ *
+ * This is a new flat driver which is based on the original emac_lite
+ * driver from John Williams <john.williams@petalogix.com>.
+ *
+ * 2007-2009 (c) Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/interrupt.h>
+
+#define DRIVER_NAME "xilinx_emaclite"
+
+/* Register offsets for the EmacLite Core */
+#define XEL_TXBUFF_OFFSET 0x0 /* Transmit Buffer */
+#define XEL_MDIOADDR_OFFSET 0x07E4 /* MDIO Address Register */
+#define XEL_MDIOWR_OFFSET 0x07E8 /* MDIO Write Data Register */
+#define XEL_MDIORD_OFFSET 0x07EC /* MDIO Read Data Register */
+#define XEL_MDIOCTRL_OFFSET 0x07F0 /* MDIO Control Register */
+#define XEL_GIER_OFFSET 0x07F8 /* GIE Register */
+#define XEL_TSR_OFFSET 0x07FC /* Tx status */
+#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */
+
+#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */
+#define XEL_RPLR_OFFSET 0x100C /* Rx packet length */
+#define XEL_RSR_OFFSET 0x17FC /* Rx status */
+
+#define XEL_BUFFER_OFFSET 0x0800 /* Next Tx/Rx buffer's offset */
+
+/* MDIO Address Register Bit Masks */
+#define XEL_MDIOADDR_REGADR_MASK 0x0000001F /* Register Address */
+#define XEL_MDIOADDR_PHYADR_MASK 0x000003E0 /* PHY Address */
+#define XEL_MDIOADDR_PHYADR_SHIFT 5
+#define XEL_MDIOADDR_OP_MASK 0x00000400 /* RD/WR Operation */
+
+/* MDIO Write Data Register Bit Masks */
+#define XEL_MDIOWR_WRDATA_MASK 0x0000FFFF /* Data to be Written */
+
+/* MDIO Read Data Register Bit Masks */
+#define XEL_MDIORD_RDDATA_MASK 0x0000FFFF /* Data to be Read */
+
+/* MDIO Control Register Bit Masks */
+#define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001 /* MDIO Status Mask */
+#define XEL_MDIOCTRL_MDIOEN_MASK 0x00000008 /* MDIO Enable */
+
+/* Global Interrupt Enable Register (GIER) Bit Masks */
+#define XEL_GIER_GIE_MASK 0x80000000 /* Global Enable */
+
+/* Transmit Status Register (TSR) Bit Masks */
+#define XEL_TSR_XMIT_BUSY_MASK 0x00000001 /* Tx complete */
+#define XEL_TSR_PROGRAM_MASK 0x00000002 /* Program the MAC address */
+#define XEL_TSR_XMIT_IE_MASK 0x00000008 /* Tx interrupt enable bit */
+#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000 /* Buffer is active, SW bit
+ * only. This is not documented
+ * in the HW spec */
+
+/* Define for programming the MAC address into the EmacLite */
+#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
+
+/* Receive Status Register (RSR) */
+#define XEL_RSR_RECV_DONE_MASK 0x00000001 /* Rx complete */
+#define XEL_RSR_RECV_IE_MASK 0x00000008 /* Rx interrupt enable bit */
+
+/* Transmit Packet Length Register (TPLR) */
+#define XEL_TPLR_LENGTH_MASK 0x0000FFFF /* Tx packet length */
+
+/* Receive Packet Length Register (RPLR) */
+#define XEL_RPLR_LENGTH_MASK 0x0000FFFF /* Rx packet length */
+
+#define XEL_HEADER_OFFSET 12 /* Offset to length field */
+#define XEL_HEADER_SHIFT 16 /* Shift value for length */
+
+/* General Ethernet Definitions */
+#define XEL_ARP_PACKET_SIZE 28 /* Max ARP packet size */
+#define XEL_HEADER_IP_LENGTH_OFFSET 16 /* IP Length Offset */
+
+
+
+#define TX_TIMEOUT (60*HZ) /* Tx timeout is 60 seconds. */
+#define ALIGNMENT 4
+
+/* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */
+#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT)
+
+/**
+ * struct net_local - Our private per device data
+ * @ndev: instance of the network device
+ * @tx_ping_pong: indicates whether Tx Pong buffer is configured in HW
+ * @rx_ping_pong: indicates whether Rx Pong buffer is configured in HW
+ * @next_tx_buf_to_use: next Tx buffer to write to
+ * @next_rx_buf_to_use: next Rx buffer to read from
+ * @base_addr: base address of the Emaclite device
+ * @reset_lock: lock used for synchronization
+ * @deferred_skb: holds an skb (for transmission at a later time) when the
+ * Tx buffer is not free
+ * @phy_dev: pointer to the PHY device
+ * @phy_node: pointer to the PHY device node
+ * @mii_bus: pointer to the MII bus
+ * @mdio_irqs: IRQs table for MDIO bus
+ * @last_link: last link status
+ * @has_mdio: indicates whether MDIO is included in the HW
+ */
+struct net_local {
+
+ struct net_device *ndev;
+
+ bool tx_ping_pong;
+ bool rx_ping_pong;
+ u32 next_tx_buf_to_use;
+ u32 next_rx_buf_to_use;
+ void __iomem *base_addr;
+
+ spinlock_t reset_lock;
+ struct sk_buff *deferred_skb;
+
+ struct phy_device *phy_dev;
+ struct device_node *phy_node;
+
+ struct mii_bus *mii_bus;
+ int mdio_irqs[PHY_MAX_ADDR];
+
+ int last_link;
+ bool has_mdio;
+};
+
+
+/*************************/
+/* EmacLite driver calls */
+/*************************/
+
+/**
+ * xemaclite_enable_interrupts - Enable the interrupts for the EmacLite device
+ * @drvdata: Pointer to the Emaclite device private data
+ *
+ * This function enables the Tx and Rx interrupts for the Emaclite device along
+ * with the Global Interrupt Enable.
+ */
+static void xemaclite_enable_interrupts(struct net_local *drvdata)
+{
+ u32 reg_data;
+
+ /* Enable the Tx interrupts for the first Buffer */
+ reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
+ reg_data | XEL_TSR_XMIT_IE_MASK);
+
+ /* Enable the Tx interrupts for the second Buffer if
+ * configured in HW */
+ if (drvdata->tx_ping_pong != 0) {
+ reg_data = in_be32(drvdata->base_addr +
+ XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_TSR_OFFSET,
+ reg_data | XEL_TSR_XMIT_IE_MASK);
+ }
+
+ /* Enable the Rx interrupts for the first buffer */
+ out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
+ XEL_RSR_RECV_IE_MASK);
+
+ /* Enable the Rx interrupts for the second Buffer if
+ * configured in HW */
+ if (drvdata->rx_ping_pong != 0) {
+ out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_RSR_OFFSET,
+ XEL_RSR_RECV_IE_MASK);
+ }
+
+ /* Enable the Global Interrupt Enable */
+ out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
+}
+
+/**
+ * xemaclite_disable_interrupts - Disable the interrupts for the EmacLite device
+ * @drvdata: Pointer to the Emaclite device private data
+ *
+ * This function disables the Tx and Rx interrupts for the Emaclite device,
+ * along with the Global Interrupt Enable.
+ */
+static void xemaclite_disable_interrupts(struct net_local *drvdata)
+{
+ u32 reg_data;
+
+ /* Disable the Global Interrupt Enable */
+ out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
+
+ /* Disable the Tx interrupts for the first buffer */
+ reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
+ reg_data & (~XEL_TSR_XMIT_IE_MASK));
+
+ /* Disable the Tx interrupts for the second Buffer
+ * if configured in HW */
+ if (drvdata->tx_ping_pong != 0) {
+ reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_TSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_TSR_OFFSET,
+ reg_data & (~XEL_TSR_XMIT_IE_MASK));
+ }
+
+ /* Disable the Rx interrupts for the first buffer */
+ reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
+ reg_data & (~XEL_RSR_RECV_IE_MASK));
+
+ /* Disable the Rx interrupts for the second buffer
+ * if configured in HW */
+ if (drvdata->rx_ping_pong != 0) {
+
+ reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_RSR_OFFSET);
+ out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+ XEL_RSR_OFFSET,
+ reg_data & (~XEL_RSR_RECV_IE_MASK));
+ }
+}
+
+/**
+ * xemaclite_aligned_write - Write from 16-bit aligned to 32-bit aligned address
+ * @src_ptr: Void pointer to the 16-bit aligned source address
+ * @dest_ptr: Pointer to the 32-bit aligned destination address
+ * @length: Number bytes to write from source to destination
+ *
+ * This function writes data from a 16-bit aligned buffer to a 32-bit aligned
+ * address in the EmacLite device.
+ */
+static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr,
+ unsigned length)
+{
+ u32 align_buffer;
+ u32 *to_u32_ptr;
+ u16 *from_u16_ptr, *to_u16_ptr;
+
+ to_u32_ptr = dest_ptr;
+ from_u16_ptr = src_ptr;
+ align_buffer = 0;
+
+ for (; length > 3; length -= 4) {
+ to_u16_ptr = (u16 *)&align_buffer;
+ *to_u16_ptr++ = *from_u16_ptr++;
+ *to_u16_ptr++ = *from_u16_ptr++;
+
+ /* Output a word */
+ *to_u32_ptr++ = align_buffer;
+ }
+ if (length) {
+ u8 *from_u8_ptr, *to_u8_ptr;
+
+ /* Set up to output the remaining data */
+ align_buffer = 0;
+ to_u8_ptr = (u8 *) &align_buffer;
+ from_u8_ptr = (u8 *) from_u16_ptr;
+
+ /* Output the remaining data */
+ for (; length > 0; length--)
+ *to_u8_ptr++ = *from_u8_ptr++;
+
+ *to_u32_ptr = align_buffer;
+ }
+}
+
+/**
+ * xemaclite_aligned_read - Read from 32-bit aligned to 16-bit aligned buffer
+ * @src_ptr: Pointer to the 32-bit aligned source address
+ * @dest_ptr: Pointer to the 16-bit aligned destination address
+ * @length: Number bytes to read from source to destination
+ *
+ * This function reads data from a 32-bit aligned address in the EmacLite device
+ * to a 16-bit aligned buffer.
+ */
+static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
+ unsigned length)
+{
+ u16 *to_u16_ptr, *from_u16_ptr;
+ u32 *from_u32_ptr;
+ u32 align_buffer;
+
+ from_u32_ptr = src_ptr;
+ to_u16_ptr = (u16 *) dest_ptr;
+
+ for (; length > 3; length -= 4) {
+ /* Copy each word into the temporary buffer */
+ align_buffer = *from_u32_ptr++;
+ from_u16_ptr = (u16 *)&align_buffer;
+
+ /* Read data from source */
+ *to_u16_ptr++ = *from_u16_ptr++;
+ *to_u16_ptr++ = *from_u16_ptr++;
+ }
+
+ if (length) {
+ u8 *to_u8_ptr, *from_u8_ptr;
+
+ /* Set up to read the remaining data */
+ to_u8_ptr = (u8 *) to_u16_ptr;
+ align_buffer = *from_u32_ptr++;
+ from_u8_ptr = (u8 *) &align_buffer;
+
+ /* Read the remaining data */
+ for (; length > 0; length--)
+ *to_u8_ptr = *from_u8_ptr;
+ }
+}
+
+/**
+ * xemaclite_send_data - Send an Ethernet frame
+ * @drvdata: Pointer to the Emaclite device private data
+ * @data: Pointer to the data to be sent
+ * @byte_count: Total frame size, including header
+ *
+ * This function checks if the Tx buffer of the Emaclite device is free to send
+ * data. If so, it fills the Tx buffer with data for transmission. Otherwise, it
+ * returns an error.
+ *
+ * Return: 0 upon success or -1 if the buffer(s) are full.
+ *
+ * Note: The maximum Tx packet size can not be more than Ethernet header
+ * (14 Bytes) + Maximum MTU (1500 bytes). This is excluding FCS.
+ */
+static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
+ unsigned int byte_count)
+{
+ u32 reg_data;
+ void __iomem *addr;
+
+ /* Determine the expected Tx buffer address */
+ addr = drvdata->base_addr + drvdata->next_tx_buf_to_use;
+
+ /* If the length is too large, truncate it */
+ if (byte_count > ETH_FRAME_LEN)
+ byte_count = ETH_FRAME_LEN;
+
+ /* Check if the expected buffer is available */
+ reg_data = in_be32(addr + XEL_TSR_OFFSET);
+ if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
+ XEL_TSR_XMIT_ACTIVE_MASK)) == 0) {
+
+ /* Switch to next buffer if configured */
+ if (drvdata->tx_ping_pong != 0)
+ drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET;
+ } else if (drvdata->tx_ping_pong != 0) {
+ /* If the expected buffer is full, try the other buffer,
+ * if it is configured in HW */
+
+ addr = (void __iomem __force *)((u32 __force)addr ^
+ XEL_BUFFER_OFFSET);
+ reg_data = in_be32(addr + XEL_TSR_OFFSET);
+
+ if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
+ XEL_TSR_XMIT_ACTIVE_MASK)) != 0)
+ return -1; /* Buffers were full, return failure */
+ } else
+ return -1; /* Buffer was full, return failure */
+
+ /* Write the frame to the buffer */
+ xemaclite_aligned_write(data, (u32 __force *) addr, byte_count);
+
+ out_be32(addr + XEL_TPLR_OFFSET, (byte_count & XEL_TPLR_LENGTH_MASK));
+
+ /* Update the Tx Status Register to indicate that there is a
+ * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which
+ * is used by the interrupt handler to check whether a frame
+ * has been transmitted */
+ reg_data = in_be32(addr + XEL_TSR_OFFSET);
+ reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK);
+ out_be32(addr + XEL_TSR_OFFSET, reg_data);
+
+ return 0;
+}
+
+/**
+ * xemaclite_recv_data - Receive a frame
+ * @drvdata: Pointer to the Emaclite device private data
+ * @data: Address where the data is to be received
+ *
+ * This function is intended to be called from the interrupt context or
+ * with a wrapper which waits for the receive frame to be available.
+ *
+ * Return: Total number of bytes received
+ */
+static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
+{
+ void __iomem *addr;
+ u16 length, proto_type;
+ u32 reg_data;
+
+ /* Determine the expected buffer address */
+ addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use);
+
+ /* Verify which buffer has valid data */
+ reg_data = in_be32(addr + XEL_RSR_OFFSET);
+
+ if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
+ if (drvdata->rx_ping_pong != 0)
+ drvdata->next_rx_buf_to_use ^= XEL_BUFFER_OFFSET;
+ } else {
+ /* The instance is out of sync, try other buffer if other
+ * buffer is configured, return 0 otherwise. If the instance is
+ * out of sync, do not update the 'next_rx_buf_to_use' since it
+ * will correct on subsequent calls */
+ if (drvdata->rx_ping_pong != 0)
+ addr = (void __iomem __force *)((u32 __force)addr ^
+ XEL_BUFFER_OFFSET);
+ else
+ return 0; /* No data was available */
+
+ /* Verify that buffer has valid data */
+ reg_data = in_be32(addr + XEL_RSR_OFFSET);
+ if ((reg_data & XEL_RSR_RECV_DONE_MASK) !=
+ XEL_RSR_RECV_DONE_MASK)
+ return 0; /* No data was available */
+ }
+
+ /* Get the protocol type of the ethernet frame that arrived */
+ proto_type = ((ntohl(in_be32(addr + XEL_HEADER_OFFSET +
+ XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) &
+ XEL_RPLR_LENGTH_MASK);
+
+ /* Check if received ethernet frame is a raw ethernet frame
+ * or an IP packet or an ARP packet */
+ if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
+
+ if (proto_type == ETH_P_IP) {
+ length = ((ntohl(in_be32(addr +
+ XEL_HEADER_IP_LENGTH_OFFSET +
+ XEL_RXBUFF_OFFSET)) >>
+ XEL_HEADER_SHIFT) &
+ XEL_RPLR_LENGTH_MASK);
+ length += ETH_HLEN + ETH_FCS_LEN;
+
+ } else if (proto_type == ETH_P_ARP)
+ length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN;
+ else
+ /* Field contains type other than IP or ARP, use max
+ * frame size and let user parse it */
+ length = ETH_FRAME_LEN + ETH_FCS_LEN;
+ } else
+ /* Use the length in the frame, plus the header and trailer */
+ length = proto_type + ETH_HLEN + ETH_FCS_LEN;
+
+ /* Read from the EmacLite device */
+ xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET),
+ data, length);
+
+ /* Acknowledge the frame */
+ reg_data = in_be32(addr + XEL_RSR_OFFSET);
+ reg_data &= ~XEL_RSR_RECV_DONE_MASK;
+ out_be32(addr + XEL_RSR_OFFSET, reg_data);
+
+ return length;
+}
+
+/**
+ * xemaclite_update_address - Update the MAC address in the device
+ * @drvdata: Pointer to the Emaclite device private data
+ * @address_ptr:Pointer to the MAC address (MAC address is a 48-bit value)
+ *
+ * Tx must be idle and Rx should be idle for deterministic results.
+ * It is recommended that this function should be called after the
+ * initialization and before transmission of any packets from the device.
+ * The MAC address can be programmed using any of the two transmit
+ * buffers (if configured).
+ */
+static void xemaclite_update_address(struct net_local *drvdata,
+ u8 *address_ptr)
+{
+ void __iomem *addr;
+ u32 reg_data;
+
+ /* Determine the expected Tx buffer address */
+ addr = drvdata->base_addr + drvdata->next_tx_buf_to_use;
+
+ xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN);
+
+ out_be32(addr + XEL_TPLR_OFFSET, ETH_ALEN);
+
+ /* Update the MAC address in the EmacLite */
+ reg_data = in_be32(addr + XEL_TSR_OFFSET);
+ out_be32(addr + XEL_TSR_OFFSET, reg_data | XEL_TSR_PROG_MAC_ADDR);
+
+ /* Wait for EmacLite to finish with the MAC address update */
+ while ((in_be32(addr + XEL_TSR_OFFSET) &
+ XEL_TSR_PROG_MAC_ADDR) != 0)
+ ;
+}
+
+/**
+ * xemaclite_set_mac_address - Set the MAC address for this device
+ * @dev: Pointer to the network device instance
+ * @addr: Void pointer to the sockaddr structure
+ *
+ * This function copies the HW address from the sockaddr strucutre to the
+ * net_device structure and updates the address in HW.
+ *
+ * Return: Error if the net device is busy or 0 if the addr is set
+ * successfully
+ */
+static int xemaclite_set_mac_address(struct net_device *dev, void *address)
+{
+ struct net_local *lp = netdev_priv(dev);
+ struct sockaddr *addr = address;
+
+ if (netif_running(dev))
+ return -EBUSY;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ xemaclite_update_address(lp, dev->dev_addr);
+ return 0;
+}
+
+/**
+ * xemaclite_tx_timeout - Callback for Tx Timeout
+ * @dev: Pointer to the network device
+ *
+ * This function is called when Tx time out occurs for Emaclite device.
+ */
+static void xemaclite_tx_timeout(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ dev_err(&lp->ndev->dev, "Exceeded transmit timeout of %lu ms\n",
+ TX_TIMEOUT * 1000UL / HZ);
+
+ dev->stats.tx_errors++;
+
+ /* Reset the device */
+ spin_lock_irqsave(&lp->reset_lock, flags);
+
+ /* Shouldn't really be necessary, but shouldn't hurt */
+ netif_stop_queue(dev);
+
+ xemaclite_disable_interrupts(lp);
+ xemaclite_enable_interrupts(lp);
+
+ if (lp->deferred_skb) {
+ dev_kfree_skb(lp->deferred_skb);
+ lp->deferred_skb = NULL;
+ dev->stats.tx_errors++;
+ }
+
+ /* To exclude tx timeout */
+ dev->trans_start = jiffies; /* prevent tx timeout */
+
+ /* We're all ready to go. Start the queue */
+ netif_wake_queue(dev);
+ spin_unlock_irqrestore(&lp->reset_lock, flags);
+}
+
+/**********************/
+/* Interrupt Handlers */
+/**********************/
+
+/**
+ * xemaclite_tx_handler - Interrupt handler for frames sent
+ * @dev: Pointer to the network device
+ *
+ * This function updates the number of packets transmitted and handles the
+ * deferred skb, if there is one.
+ */
+static void xemaclite_tx_handler(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+
+ dev->stats.tx_packets++;
+ if (lp->deferred_skb) {
+ if (xemaclite_send_data(lp,
+ (u8 *) lp->deferred_skb->data,
+ lp->deferred_skb->len) != 0)
+ return;
+ else {
+ dev->stats.tx_bytes += lp->deferred_skb->len;
+ dev_kfree_skb_irq(lp->deferred_skb);
+ lp->deferred_skb = NULL;
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ netif_wake_queue(dev);
+ }
+ }
+}
+
+/**
+ * xemaclite_rx_handler- Interrupt handler for frames received
+ * @dev: Pointer to the network device
+ *
+ * This function allocates memory for a socket buffer, fills it with data
+ * received and hands it over to the TCP/IP stack.
+ */
+static void xemaclite_rx_handler(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ struct sk_buff *skb;
+ unsigned int align;
+ u32 len;
+
+ len = ETH_FRAME_LEN + ETH_FCS_LEN;
+ skb = dev_alloc_skb(len + ALIGNMENT);
+ if (!skb) {
+ /* Couldn't get memory. */
+ dev->stats.rx_dropped++;
+ dev_err(&lp->ndev->dev, "Could not allocate receive buffer\n");
+ return;
+ }
+
+ /*
+ * A new skb should have the data halfword aligned, but this code is
+ * here just in case that isn't true. Calculate how many
+ * bytes we should reserve to get the data to start on a word
+ * boundary */
+ align = BUFFER_ALIGN(skb->data);
+ if (align)
+ skb_reserve(skb, align);
+
+ skb_reserve(skb, 2);
+
+ len = xemaclite_recv_data(lp, (u8 *) skb->data);
+
+ if (!len) {
+ dev->stats.rx_errors++;
+ dev_kfree_skb_irq(skb);
+ return;
+ }
+
+ skb_put(skb, len); /* Tell the skb how much data we got */
+
+ skb->protocol = eth_type_trans(skb, dev);
+ skb_checksum_none_assert(skb);
+
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += len;
+
+ if (!skb_defer_rx_timestamp(skb))
+ netif_rx(skb); /* Send the packet upstream */
+}
+
+/**
+ * xemaclite_interrupt - Interrupt handler for this driver
+ * @irq: Irq of the Emaclite device
+ * @dev_id: Void pointer to the network device instance used as callback
+ * reference
+ *
+ * This function handles the Tx and Rx interrupts of the EmacLite device.
+ */
+static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
+{
+ bool tx_complete = 0;
+ struct net_device *dev = dev_id;
+ struct net_local *lp = netdev_priv(dev);
+ void __iomem *base_addr = lp->base_addr;
+ u32 tx_status;
+
+ /* Check if there is Rx Data available */
+ if ((in_be32(base_addr + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK) ||
+ (in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET)
+ & XEL_RSR_RECV_DONE_MASK))
+
+ xemaclite_rx_handler(dev);
+
+ /* Check if the Transmission for the first buffer is completed */
+ tx_status = in_be32(base_addr + XEL_TSR_OFFSET);
+ if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
+ (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
+
+ tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
+ out_be32(base_addr + XEL_TSR_OFFSET, tx_status);
+
+ tx_complete = 1;
+ }
+
+ /* Check if the Transmission for the second buffer is completed */
+ tx_status = in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
+ if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
+ (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
+
+ tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
+ out_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET,
+ tx_status);
+
+ tx_complete = 1;
+ }
+
+ /* If there was a Tx interrupt, call the Tx Handler */
+ if (tx_complete != 0)
+ xemaclite_tx_handler(dev);
+
+ return IRQ_HANDLED;
+}
+
+/**********************/
+/* MDIO Bus functions */
+/**********************/
+
+/**
+ * xemaclite_mdio_wait - Wait for the MDIO to be ready to use
+ * @lp: Pointer to the Emaclite device private data
+ *
+ * This function waits till the device is ready to accept a new MDIO
+ * request.
+ *
+ * Return: 0 for success or ETIMEDOUT for a timeout
+ */
+
+static int xemaclite_mdio_wait(struct net_local *lp)
+{
+ long end = jiffies + 2;
+
+ /* wait for the MDIO interface to not be busy or timeout
+ after some time.
+ */
+ while (in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET) &
+ XEL_MDIOCTRL_MDIOSTS_MASK) {
+ if (end - jiffies <= 0) {
+ WARN_ON(1);
+ return -ETIMEDOUT;
+ }
+ msleep(1);
+ }
+ return 0;
+}
+
+/**
+ * xemaclite_mdio_read - Read from a given MII management register
+ * @bus: the mii_bus struct
+ * @phy_id: the phy address
+ * @reg: register number to read from
+ *
+ * This function waits till the device is ready to accept a new MDIO
+ * request and then writes the phy address to the MDIO Address register
+ * and reads data from MDIO Read Data register, when its available.
+ *
+ * Return: Value read from the MII management register
+ */
+static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
+{
+ struct net_local *lp = bus->priv;
+ u32 ctrl_reg;
+ u32 rc;
+
+ if (xemaclite_mdio_wait(lp))
+ return -ETIMEDOUT;
+
+ /* Write the PHY address, register number and set the OP bit in the
+ * MDIO Address register. Set the Status bit in the MDIO Control
+ * register to start a MDIO read transaction.
+ */
+ ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
+ out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
+ XEL_MDIOADDR_OP_MASK |
+ ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
+ out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
+ ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+
+ if (xemaclite_mdio_wait(lp))
+ return -ETIMEDOUT;
+
+ rc = in_be32(lp->base_addr + XEL_MDIORD_OFFSET);
+
+ dev_dbg(&lp->ndev->dev,
+ "xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n",
+ phy_id, reg, rc);
+
+ return rc;
+}
+
+/**
+ * xemaclite_mdio_write - Write to a given MII management register
+ * @bus: the mii_bus struct
+ * @phy_id: the phy address
+ * @reg: register number to write to
+ * @val: value to write to the register number specified by reg
+ *
+ * This function waits till the device is ready to accept a new MDIO
+ * request and then writes the val to the MDIO Write Data register.
+ */
+static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
+ u16 val)
+{
+ struct net_local *lp = bus->priv;
+ u32 ctrl_reg;
+
+ dev_dbg(&lp->ndev->dev,
+ "xemaclite_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
+ phy_id, reg, val);
+
+ if (xemaclite_mdio_wait(lp))
+ return -ETIMEDOUT;
+
+ /* Write the PHY address, register number and clear the OP bit in the
+ * MDIO Address register and then write the value into the MDIO Write
+ * Data register. Finally, set the Status bit in the MDIO Control
+ * register to start a MDIO write transaction.
+ */
+ ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
+ out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
+ ~XEL_MDIOADDR_OP_MASK &
+ ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
+ out_be32(lp->base_addr + XEL_MDIOWR_OFFSET, val);
+ out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
+ ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+
+ return 0;
+}
+
+/**
+ * xemaclite_mdio_reset - Reset the mdio bus.
+ * @bus: Pointer to the MII bus
+ *
+ * This function is required(?) as per Documentation/networking/phy.txt.
+ * There is no reset in this device; this function always returns 0.
+ */
+static int xemaclite_mdio_reset(struct mii_bus *bus)
+{
+ return 0;
+}
+
+/**
+ * xemaclite_mdio_setup - Register mii_bus for the Emaclite device
+ * @lp: Pointer to the Emaclite device private data
+ * @ofdev: Pointer to OF device structure
+ *
+ * This function enables MDIO bus in the Emaclite device and registers a
+ * mii_bus.
+ *
+ * Return: 0 upon success or a negative error upon failure
+ */
+static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
+{
+ struct mii_bus *bus;
+ int rc;
+ struct resource res;
+ struct device_node *np = of_get_parent(lp->phy_node);
+
+ /* Don't register the MDIO bus if the phy_node or its parent node
+ * can't be found.
+ */
+ if (!np)
+ return -ENODEV;
+
+ /* Enable the MDIO bus by asserting the enable bit in MDIO Control
+ * register.
+ */
+ out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
+ XEL_MDIOCTRL_MDIOEN_MASK);
+
+ bus = mdiobus_alloc();
+ if (!bus)
+ return -ENOMEM;
+
+ of_address_to_resource(np, 0, &res);
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
+ (unsigned long long)res.start);
+ bus->priv = lp;
+ bus->name = "Xilinx Emaclite MDIO";
+ bus->read = xemaclite_mdio_read;
+ bus->write = xemaclite_mdio_write;
+ bus->reset = xemaclite_mdio_reset;
+ bus->parent = dev;
+ bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
+
+ lp->mii_bus = bus;
+
+ rc = of_mdiobus_register(bus, np);
+ if (rc)
+ goto err_register;
+
+ return 0;
+
+err_register:
+ mdiobus_free(bus);
+ return rc;
+}
+
+/**
+ * xemaclite_adjust_link - Link state callback for the Emaclite device
+ * @ndev: pointer to net_device struct
+ *
+ * There's nothing in the Emaclite device to be configured when the link
+ * state changes. We just print the status.
+ */
+void xemaclite_adjust_link(struct net_device *ndev)
+{
+ struct net_local *lp = netdev_priv(ndev);
+ struct phy_device *phy = lp->phy_dev;
+ int link_state;
+
+ /* hash together the state values to decide if something has changed */
+ link_state = phy->speed | (phy->duplex << 1) | phy->link;
+
+ if (lp->last_link != link_state) {
+ lp->last_link = link_state;
+ phy_print_status(phy);
+ }
+}
+
+/**
+ * xemaclite_open - Open the network device
+ * @dev: Pointer to the network device
+ *
+ * This function sets the MAC address, requests an IRQ and enables interrupts
+ * for the Emaclite device and starts the Tx queue.
+ * It also connects to the phy device, if MDIO is included in Emaclite device.
+ */
+static int xemaclite_open(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int retval;
+
+ /* Just to be safe, stop the device first */
+ xemaclite_disable_interrupts(lp);
+
+ if (lp->phy_node) {
+ u32 bmcr;
+
+ lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
+ xemaclite_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+ if (!lp->phy_dev) {
+ dev_err(&lp->ndev->dev, "of_phy_connect() failed\n");
+ return -ENODEV;
+ }
+
+ /* EmacLite doesn't support giga-bit speeds */
+ lp->phy_dev->supported &= (PHY_BASIC_FEATURES);
+ lp->phy_dev->advertising = lp->phy_dev->supported;
+
+ /* Don't advertise 1000BASE-T Full/Half duplex speeds */
+ phy_write(lp->phy_dev, MII_CTRL1000, 0);
+
+ /* Advertise only 10 and 100mbps full/half duplex speeds */
+ phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL);
+
+ /* Restart auto negotiation */
+ bmcr = phy_read(lp->phy_dev, MII_BMCR);
+ bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ phy_write(lp->phy_dev, MII_BMCR, bmcr);
+
+ phy_start(lp->phy_dev);
+ }
+
+ /* Set the MAC address each time opened */
+ xemaclite_update_address(lp, dev->dev_addr);
+
+ /* Grab the IRQ */
+ retval = request_irq(dev->irq, xemaclite_interrupt, 0, dev->name, dev);
+ if (retval) {
+ dev_err(&lp->ndev->dev, "Could not allocate interrupt %d\n",
+ dev->irq);
+ if (lp->phy_dev)
+ phy_disconnect(lp->phy_dev);
+ lp->phy_dev = NULL;
+
+ return retval;
+ }
+
+ /* Enable Interrupts */
+ xemaclite_enable_interrupts(lp);
+
+ /* We're ready to go */
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+/**
+ * xemaclite_close - Close the network device
+ * @dev: Pointer to the network device
+ *
+ * This function stops the Tx queue, disables interrupts and frees the IRQ for
+ * the Emaclite device.
+ * It also disconnects the phy device associated with the Emaclite device.
+ */
+static int xemaclite_close(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ xemaclite_disable_interrupts(lp);
+ free_irq(dev->irq, dev);
+
+ if (lp->phy_dev)
+ phy_disconnect(lp->phy_dev);
+ lp->phy_dev = NULL;
+
+ return 0;
+}
+
+/**
+ * xemaclite_send - Transmit a frame
+ * @orig_skb: Pointer to the socket buffer to be transmitted
+ * @dev: Pointer to the network device
+ *
+ * This function checks if the Tx buffer of the Emaclite device is free to send
+ * data. If so, it fills the Tx buffer with data from socket buffer data,
+ * updates the stats and frees the socket buffer. The Tx completion is signaled
+ * by an interrupt. If the Tx buffer isn't free, then the socket buffer is
+ * deferred and the Tx queue is stopped so that the deferred socket buffer can
+ * be transmitted when the Emaclite device is free to transmit data.
+ *
+ * Return: 0, always.
+ */
+static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ struct sk_buff *new_skb;
+ unsigned int len;
+ unsigned long flags;
+
+ len = orig_skb->len;
+
+ new_skb = orig_skb;
+
+ spin_lock_irqsave(&lp->reset_lock, flags);
+ if (xemaclite_send_data(lp, (u8 *) new_skb->data, len) != 0) {
+ /* If the Emaclite Tx buffer is busy, stop the Tx queue and
+ * defer the skb for transmission during the ISR, after the
+ * current transmission is complete */
+ netif_stop_queue(dev);
+ lp->deferred_skb = new_skb;
+ /* Take the time stamp now, since we can't do this in an ISR. */
+ skb_tx_timestamp(new_skb);
+ spin_unlock_irqrestore(&lp->reset_lock, flags);
+ return 0;
+ }
+ spin_unlock_irqrestore(&lp->reset_lock, flags);
+
+ skb_tx_timestamp(new_skb);
+
+ dev->stats.tx_bytes += len;
+ dev_kfree_skb(new_skb);
+
+ return 0;
+}
+
+/**
+ * xemaclite_remove_ndev - Free the network device
+ * @ndev: Pointer to the network device to be freed
+ *
+ * This function un maps the IO region of the Emaclite device and frees the net
+ * device.
+ */
+static void xemaclite_remove_ndev(struct net_device *ndev)
+{
+ if (ndev) {
+ struct net_local *lp = netdev_priv(ndev);
+
+ if (lp->base_addr)
+ iounmap((void __iomem __force *) (lp->base_addr));
+ free_netdev(ndev);
+ }
+}
+
+/**
+ * get_bool - Get a parameter from the OF device
+ * @ofdev: Pointer to OF device structure
+ * @s: Property to be retrieved
+ *
+ * This function looks for a property in the device node and returns the value
+ * of the property if its found or 0 if the property is not found.
+ *
+ * Return: Value of the parameter if the parameter is found, or 0 otherwise
+ */
+static bool get_bool(struct platform_device *ofdev, const char *s)
+{
+ u32 *p = (u32 *)of_get_property(ofdev->dev.of_node, s, NULL);
+
+ if (p) {
+ return (bool)*p;
+ } else {
+ dev_warn(&ofdev->dev, "Parameter %s not found,"
+ "defaulting to false\n", s);
+ return 0;
+ }
+}
+
+static struct net_device_ops xemaclite_netdev_ops;
+
+/**
+ * xemaclite_of_probe - Probe method for the Emaclite device.
+ * @ofdev: Pointer to OF device structure
+ * @match: Pointer to the structure used for matching a device
+ *
+ * This function probes for the Emaclite device in the device tree.
+ * It initializes the driver data structure and the hardware, sets the MAC
+ * address and registers the network device.
+ * It also registers a mii_bus for the Emaclite device, if MDIO is included
+ * in the device.
+ *
+ * Return: 0, if the driver is bound to the Emaclite device, or
+ * a negative error if there is failure.
+ */
+static int __devinit xemaclite_of_probe(struct platform_device *ofdev)
+{
+ struct resource r_irq; /* Interrupt resources */
+ struct resource r_mem; /* IO mem resources */
+ struct net_device *ndev = NULL;
+ struct net_local *lp = NULL;
+ struct device *dev = &ofdev->dev;
+ const void *mac_address;
+
+ int rc = 0;
+
+ dev_info(dev, "Device Tree Probing\n");
+
+ /* Get iospace for the device */
+ rc = of_address_to_resource(ofdev->dev.of_node, 0, &r_mem);
+ if (rc) {
+ dev_err(dev, "invalid address\n");
+ return rc;
+ }
+
+ /* Get IRQ for the device */
+ rc = of_irq_to_resource(ofdev->dev.of_node, 0, &r_irq);
+ if (rc == NO_IRQ) {
+ dev_err(dev, "no IRQ found\n");
+ return rc;
+ }
+
+ /* Create an ethernet device instance */
+ ndev = alloc_etherdev(sizeof(struct net_local));
+ if (!ndev) {
+ dev_err(dev, "Could not allocate network device\n");
+ return -ENOMEM;
+ }
+
+ dev_set_drvdata(dev, ndev);
+ SET_NETDEV_DEV(ndev, &ofdev->dev);
+
+ ndev->irq = r_irq.start;
+ ndev->mem_start = r_mem.start;
+ ndev->mem_end = r_mem.end;
+
+ lp = netdev_priv(ndev);
+ lp->ndev = ndev;
+
+ if (!request_mem_region(ndev->mem_start,
+ ndev->mem_end - ndev->mem_start + 1,
+ DRIVER_NAME)) {
+ dev_err(dev, "Couldn't lock memory region at %p\n",
+ (void *)ndev->mem_start);
+ rc = -EBUSY;
+ goto error2;
+ }
+
+ /* Get the virtual base address for the device */
+ lp->base_addr = ioremap(r_mem.start, resource_size(&r_mem));
+ if (NULL == lp->base_addr) {
+ dev_err(dev, "EmacLite: Could not allocate iomem\n");
+ rc = -EIO;
+ goto error1;
+ }
+
+ spin_lock_init(&lp->reset_lock);
+ lp->next_tx_buf_to_use = 0x0;
+ lp->next_rx_buf_to_use = 0x0;
+ lp->tx_ping_pong = get_bool(ofdev, "xlnx,tx-ping-pong");
+ lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong");
+ mac_address = of_get_mac_address(ofdev->dev.of_node);
+
+ if (mac_address)
+ /* Set the MAC address. */
+ memcpy(ndev->dev_addr, mac_address, 6);
+ else
+ dev_warn(dev, "No MAC address found\n");
+
+ /* Clear the Tx CSR's in case this is a restart */
+ out_be32(lp->base_addr + XEL_TSR_OFFSET, 0);
+ out_be32(lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, 0);
+
+ /* Set the MAC address in the EmacLite device */
+ xemaclite_update_address(lp, ndev->dev_addr);
+
+ lp->phy_node = of_parse_phandle(ofdev->dev.of_node, "phy-handle", 0);
+ rc = xemaclite_mdio_setup(lp, &ofdev->dev);
+ if (rc)
+ dev_warn(&ofdev->dev, "error registering MDIO bus\n");
+
+ dev_info(dev, "MAC address is now %pM\n", ndev->dev_addr);
+
+ ndev->netdev_ops = &xemaclite_netdev_ops;
+ ndev->flags &= ~IFF_MULTICAST;
+ ndev->watchdog_timeo = TX_TIMEOUT;
+
+ /* Finally, register the device */
+ rc = register_netdev(ndev);
+ if (rc) {
+ dev_err(dev,
+ "Cannot register network device, aborting\n");
+ goto error1;
+ }
+
+ dev_info(dev,
+ "Xilinx EmacLite at 0x%08X mapped to 0x%08X, irq=%d\n",
+ (unsigned int __force)ndev->mem_start,
+ (unsigned int __force)lp->base_addr, ndev->irq);
+ return 0;
+
+error1:
+ release_mem_region(ndev->mem_start, resource_size(&r_mem));
+
+error2:
+ xemaclite_remove_ndev(ndev);
+ return rc;
+}
+
+/**
+ * xemaclite_of_remove - Unbind the driver from the Emaclite device.
+ * @of_dev: Pointer to OF device structure
+ *
+ * This function is called if a device is physically removed from the system or
+ * if the driver module is being unloaded. It frees any resources allocated to
+ * the device.
+ *
+ * Return: 0, always.
+ */
+static int __devexit xemaclite_of_remove(struct platform_device *of_dev)
+{
+ struct device *dev = &of_dev->dev;
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ struct net_local *lp = netdev_priv(ndev);
+
+ /* Un-register the mii_bus, if configured */
+ if (lp->has_mdio) {
+ mdiobus_unregister(lp->mii_bus);
+ kfree(lp->mii_bus->irq);
+ mdiobus_free(lp->mii_bus);
+ lp->mii_bus = NULL;
+ }
+
+ unregister_netdev(ndev);
+
+ if (lp->phy_node)
+ of_node_put(lp->phy_node);
+ lp->phy_node = NULL;
+
+ release_mem_region(ndev->mem_start, ndev->mem_end-ndev->mem_start + 1);
+
+ xemaclite_remove_ndev(ndev);
+ dev_set_drvdata(dev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void
+xemaclite_poll_controller(struct net_device *ndev)
+{
+ disable_irq(ndev->irq);
+ xemaclite_interrupt(ndev->irq, ndev);
+ enable_irq(ndev->irq);
+}
+#endif
+
+static struct net_device_ops xemaclite_netdev_ops = {
+ .ndo_open = xemaclite_open,
+ .ndo_stop = xemaclite_close,
+ .ndo_start_xmit = xemaclite_send,
+ .ndo_set_mac_address = xemaclite_set_mac_address,
+ .ndo_tx_timeout = xemaclite_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = xemaclite_poll_controller,
+#endif
+};
+
+/* Match table for OF platform binding */
+static struct of_device_id xemaclite_of_match[] __devinitdata = {
+ { .compatible = "xlnx,opb-ethernetlite-1.01.a", },
+ { .compatible = "xlnx,opb-ethernetlite-1.01.b", },
+ { .compatible = "xlnx,xps-ethernetlite-1.00.a", },
+ { .compatible = "xlnx,xps-ethernetlite-2.00.a", },
+ { .compatible = "xlnx,xps-ethernetlite-2.01.a", },
+ { .compatible = "xlnx,xps-ethernetlite-3.00.a", },
+ { /* end of list */ },
+};
+MODULE_DEVICE_TABLE(of, xemaclite_of_match);
+
+static struct platform_driver xemaclite_of_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = xemaclite_of_match,
+ },
+ .probe = xemaclite_of_probe,
+ .remove = __devexit_p(xemaclite_of_remove),
+};
+
+/**
+ * xgpiopss_init - Initial driver registration call
+ *
+ * Return: 0 upon success, or a negative error upon failure.
+ */
+static int __init xemaclite_init(void)
+{
+ /* No kernel boot options used, we just need to register the driver */
+ return platform_driver_register(&xemaclite_of_driver);
+}
+
+/**
+ * xemaclite_cleanup - Driver un-registration call
+ */
+static void __exit xemaclite_cleanup(void)
+{
+ platform_driver_unregister(&xemaclite_of_driver);
+}
+
+module_init(xemaclite_init);
+module_exit(xemaclite_cleanup);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Xilinx Ethernet MAC Lite driver");
+MODULE_LICENSE("GPL");
+++ /dev/null
-
-#ifndef XILINX_LL_TEMAC_H
-#define XILINX_LL_TEMAC_H
-
-#include <linux/netdevice.h>
-#include <linux/of.h>
-#include <linux/spinlock.h>
-
-#ifdef CONFIG_PPC_DCR
-#include <asm/dcr.h>
-#include <asm/dcr-regs.h>
-#endif
-
-/* packet size info */
-#define XTE_HDR_SIZE 14 /* size of Ethernet header */
-#define XTE_TRL_SIZE 4 /* size of Ethernet trailer (FCS) */
-#define XTE_JUMBO_MTU 9000
-#define XTE_MAX_JUMBO_FRAME_SIZE (XTE_JUMBO_MTU + XTE_HDR_SIZE + XTE_TRL_SIZE)
-
-/* Configuration options */
-
-/* Accept all incoming packets.
- * This option defaults to disabled (cleared) */
-#define XTE_OPTION_PROMISC (1 << 0)
-/* Jumbo frame support for Tx & Rx.
- * This option defaults to disabled (cleared) */
-#define XTE_OPTION_JUMBO (1 << 1)
-/* VLAN Rx & Tx frame support.
- * This option defaults to disabled (cleared) */
-#define XTE_OPTION_VLAN (1 << 2)
-/* Enable recognition of flow control frames on Rx
- * This option defaults to enabled (set) */
-#define XTE_OPTION_FLOW_CONTROL (1 << 4)
-/* Strip FCS and PAD from incoming frames.
- * Note: PAD from VLAN frames is not stripped.
- * This option defaults to disabled (set) */
-#define XTE_OPTION_FCS_STRIP (1 << 5)
-/* Generate FCS field and add PAD automatically for outgoing frames.
- * This option defaults to enabled (set) */
-#define XTE_OPTION_FCS_INSERT (1 << 6)
-/* Enable Length/Type error checking for incoming frames. When this option is
-set, the MAC will filter frames that have a mismatched type/length field
-and if XTE_OPTION_REPORT_RXERR is set, the user is notified when these
-types of frames are encountered. When this option is cleared, the MAC will
-allow these types of frames to be received.
-This option defaults to enabled (set) */
-#define XTE_OPTION_LENTYPE_ERR (1 << 7)
-/* Enable the transmitter.
- * This option defaults to enabled (set) */
-#define XTE_OPTION_TXEN (1 << 11)
-/* Enable the receiver
-* This option defaults to enabled (set) */
-#define XTE_OPTION_RXEN (1 << 12)
-
-/* Default options set when device is initialized or reset */
-#define XTE_OPTION_DEFAULTS \
- (XTE_OPTION_TXEN | \
- XTE_OPTION_FLOW_CONTROL | \
- XTE_OPTION_RXEN)
-
-/* XPS_LL_TEMAC SDMA registers definition */
-
-#define TX_NXTDESC_PTR 0x00 /* r */
-#define TX_CURBUF_ADDR 0x01 /* r */
-#define TX_CURBUF_LENGTH 0x02 /* r */
-#define TX_CURDESC_PTR 0x03 /* rw */
-#define TX_TAILDESC_PTR 0x04 /* rw */
-#define TX_CHNL_CTRL 0x05 /* rw */
-/*
- 0:7 24:31 IRQTimeout
- 8:15 16:23 IRQCount
- 16:20 11:15 Reserved
- 21 10 0
- 22 9 UseIntOnEnd
- 23 8 LdIRQCnt
- 24 7 IRQEn
- 25:28 3:6 Reserved
- 29 2 IrqErrEn
- 30 1 IrqDlyEn
- 31 0 IrqCoalEn
-*/
-#define CHNL_CTRL_IRQ_IOE (1 << 9)
-#define CHNL_CTRL_IRQ_EN (1 << 7)
-#define CHNL_CTRL_IRQ_ERR_EN (1 << 2)
-#define CHNL_CTRL_IRQ_DLY_EN (1 << 1)
-#define CHNL_CTRL_IRQ_COAL_EN (1 << 0)
-#define TX_IRQ_REG 0x06 /* rw */
-/*
- 0:7 24:31 DltTmrValue
- 8:15 16:23 ClscCntrValue
- 16:17 14:15 Reserved
- 18:21 10:13 ClscCnt
- 22:23 8:9 DlyCnt
- 24:28 3::7 Reserved
- 29 2 ErrIrq
- 30 1 DlyIrq
- 31 0 CoalIrq
- */
-#define TX_CHNL_STS 0x07 /* r */
-/*
- 0:9 22:31 Reserved
- 10 21 TailPErr
- 11 20 CmpErr
- 12 19 AddrErr
- 13 18 NxtPErr
- 14 17 CurPErr
- 15 16 BsyWr
- 16:23 8:15 Reserved
- 24 7 Error
- 25 6 IOE
- 26 5 SOE
- 27 4 Cmplt
- 28 3 SOP
- 29 2 EOP
- 30 1 EngBusy
- 31 0 Reserved
-*/
-
-#define RX_NXTDESC_PTR 0x08 /* r */
-#define RX_CURBUF_ADDR 0x09 /* r */
-#define RX_CURBUF_LENGTH 0x0a /* r */
-#define RX_CURDESC_PTR 0x0b /* rw */
-#define RX_TAILDESC_PTR 0x0c /* rw */
-#define RX_CHNL_CTRL 0x0d /* rw */
-/*
- 0:7 24:31 IRQTimeout
- 8:15 16:23 IRQCount
- 16:20 11:15 Reserved
- 21 10 0
- 22 9 UseIntOnEnd
- 23 8 LdIRQCnt
- 24 7 IRQEn
- 25:28 3:6 Reserved
- 29 2 IrqErrEn
- 30 1 IrqDlyEn
- 31 0 IrqCoalEn
- */
-#define RX_IRQ_REG 0x0e /* rw */
-#define IRQ_COAL (1 << 0)
-#define IRQ_DLY (1 << 1)
-#define IRQ_ERR (1 << 2)
-#define IRQ_DMAERR (1 << 7) /* this is not documented ??? */
-/*
- 0:7 24:31 DltTmrValue
- 8:15 16:23 ClscCntrValue
- 16:17 14:15 Reserved
- 18:21 10:13 ClscCnt
- 22:23 8:9 DlyCnt
- 24:28 3::7 Reserved
-*/
-#define RX_CHNL_STS 0x0f /* r */
-#define CHNL_STS_ENGBUSY (1 << 1)
-#define CHNL_STS_EOP (1 << 2)
-#define CHNL_STS_SOP (1 << 3)
-#define CHNL_STS_CMPLT (1 << 4)
-#define CHNL_STS_SOE (1 << 5)
-#define CHNL_STS_IOE (1 << 6)
-#define CHNL_STS_ERR (1 << 7)
-
-#define CHNL_STS_BSYWR (1 << 16)
-#define CHNL_STS_CURPERR (1 << 17)
-#define CHNL_STS_NXTPERR (1 << 18)
-#define CHNL_STS_ADDRERR (1 << 19)
-#define CHNL_STS_CMPERR (1 << 20)
-#define CHNL_STS_TAILERR (1 << 21)
-/*
- 0:9 22:31 Reserved
- 10 21 TailPErr
- 11 20 CmpErr
- 12 19 AddrErr
- 13 18 NxtPErr
- 14 17 CurPErr
- 15 16 BsyWr
- 16:23 8:15 Reserved
- 24 7 Error
- 25 6 IOE
- 26 5 SOE
- 27 4 Cmplt
- 28 3 SOP
- 29 2 EOP
- 30 1 EngBusy
- 31 0 Reserved
-*/
-
-#define DMA_CONTROL_REG 0x10 /* rw */
-#define DMA_CONTROL_RST (1 << 0)
-#define DMA_TAIL_ENABLE (1 << 2)
-
-/* XPS_LL_TEMAC direct registers definition */
-
-#define XTE_RAF0_OFFSET 0x00
-#define RAF0_RST (1 << 0)
-#define RAF0_MCSTREJ (1 << 1)
-#define RAF0_BCSTREJ (1 << 2)
-#define XTE_TPF0_OFFSET 0x04
-#define XTE_IFGP0_OFFSET 0x08
-#define XTE_ISR0_OFFSET 0x0c
-#define ISR0_HARDACSCMPLT (1 << 0)
-#define ISR0_AUTONEG (1 << 1)
-#define ISR0_RXCMPLT (1 << 2)
-#define ISR0_RXREJ (1 << 3)
-#define ISR0_RXFIFOOVR (1 << 4)
-#define ISR0_TXCMPLT (1 << 5)
-#define ISR0_RXDCMLCK (1 << 6)
-
-#define XTE_IPR0_OFFSET 0x10
-#define XTE_IER0_OFFSET 0x14
-
-#define XTE_MSW0_OFFSET 0x20
-#define XTE_LSW0_OFFSET 0x24
-#define XTE_CTL0_OFFSET 0x28
-#define XTE_RDY0_OFFSET 0x2c
-
-#define XTE_RSE_MIIM_RR_MASK 0x0002
-#define XTE_RSE_MIIM_WR_MASK 0x0004
-#define XTE_RSE_CFG_RR_MASK 0x0020
-#define XTE_RSE_CFG_WR_MASK 0x0040
-#define XTE_RDY0_HARD_ACS_RDY_MASK (0x10000)
-
-/* XPS_LL_TEMAC indirect registers offset definition */
-
-#define XTE_RXC0_OFFSET 0x00000200 /* Rx configuration word 0 */
-#define XTE_RXC1_OFFSET 0x00000240 /* Rx configuration word 1 */
-#define XTE_RXC1_RXRST_MASK (1 << 31) /* Receiver reset */
-#define XTE_RXC1_RXJMBO_MASK (1 << 30) /* Jumbo frame enable */
-#define XTE_RXC1_RXFCS_MASK (1 << 29) /* FCS not stripped */
-#define XTE_RXC1_RXEN_MASK (1 << 28) /* Receiver enable */
-#define XTE_RXC1_RXVLAN_MASK (1 << 27) /* VLAN enable */
-#define XTE_RXC1_RXHD_MASK (1 << 26) /* Half duplex */
-#define XTE_RXC1_RXLT_MASK (1 << 25) /* Length/type check disable */
-
-#define XTE_TXC_OFFSET 0x00000280 /* Tx configuration */
-#define XTE_TXC_TXRST_MASK (1 << 31) /* Transmitter reset */
-#define XTE_TXC_TXJMBO_MASK (1 << 30) /* Jumbo frame enable */
-#define XTE_TXC_TXFCS_MASK (1 << 29) /* Generate FCS */
-#define XTE_TXC_TXEN_MASK (1 << 28) /* Transmitter enable */
-#define XTE_TXC_TXVLAN_MASK (1 << 27) /* VLAN enable */
-#define XTE_TXC_TXHD_MASK (1 << 26) /* Half duplex */
-
-#define XTE_FCC_OFFSET 0x000002C0 /* Flow control config */
-#define XTE_FCC_RXFLO_MASK (1 << 29) /* Rx flow control enable */
-#define XTE_FCC_TXFLO_MASK (1 << 30) /* Tx flow control enable */
-
-#define XTE_EMCFG_OFFSET 0x00000300 /* EMAC configuration */
-#define XTE_EMCFG_LINKSPD_MASK 0xC0000000 /* Link speed */
-#define XTE_EMCFG_HOSTEN_MASK (1 << 26) /* Host interface enable */
-#define XTE_EMCFG_LINKSPD_10 0x00000000 /* 10 Mbit LINKSPD_MASK */
-#define XTE_EMCFG_LINKSPD_100 (1 << 30) /* 100 Mbit LINKSPD_MASK */
-#define XTE_EMCFG_LINKSPD_1000 (1 << 31) /* 1000 Mbit LINKSPD_MASK */
-
-#define XTE_GMIC_OFFSET 0x00000320 /* RGMII/SGMII config */
-#define XTE_MC_OFFSET 0x00000340 /* MDIO configuration */
-#define XTE_UAW0_OFFSET 0x00000380 /* Unicast address word 0 */
-#define XTE_UAW1_OFFSET 0x00000384 /* Unicast address word 1 */
-
-#define XTE_MAW0_OFFSET 0x00000388 /* Multicast addr word 0 */
-#define XTE_MAW1_OFFSET 0x0000038C /* Multicast addr word 1 */
-#define XTE_AFM_OFFSET 0x00000390 /* Promiscuous mode */
-#define XTE_AFM_EPPRM_MASK (1 << 31) /* Promiscuous mode enable */
-
-/* Interrupt Request status */
-#define XTE_TIS_OFFSET 0x000003A0
-#define TIS_FRIS (1 << 0)
-#define TIS_MRIS (1 << 1)
-#define TIS_MWIS (1 << 2)
-#define TIS_ARIS (1 << 3)
-#define TIS_AWIS (1 << 4)
-#define TIS_CRIS (1 << 5)
-#define TIS_CWIS (1 << 6)
-
-#define XTE_TIE_OFFSET 0x000003A4 /* Interrupt enable */
-
-/** MII Mamagement Control register (MGTCR) */
-#define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */
-#define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */
-
-#define CNTLREG_WRITE_ENABLE_MASK 0x8000
-#define CNTLREG_EMAC1SEL_MASK 0x0400
-#define CNTLREG_ADDRESSCODE_MASK 0x03ff
-
-/* CDMAC descriptor status bit definitions */
-
-#define STS_CTRL_APP0_ERR (1 << 31)
-#define STS_CTRL_APP0_IRQONEND (1 << 30)
-/* undoccumented */
-#define STS_CTRL_APP0_STOPONEND (1 << 29)
-#define STS_CTRL_APP0_CMPLT (1 << 28)
-#define STS_CTRL_APP0_SOP (1 << 27)
-#define STS_CTRL_APP0_EOP (1 << 26)
-#define STS_CTRL_APP0_ENGBUSY (1 << 25)
-/* undocumented */
-#define STS_CTRL_APP0_ENGRST (1 << 24)
-
-#define TX_CONTROL_CALC_CSUM_MASK 1
-
-#define MULTICAST_CAM_TABLE_NUM 4
-
-/* TEMAC Synthesis features */
-#define TEMAC_FEATURE_RX_CSUM (1 << 0)
-#define TEMAC_FEATURE_TX_CSUM (1 << 1)
-
-/* TX/RX CURDESC_PTR points to first descriptor */
-/* TX/RX TAILDESC_PTR points to last descriptor in linked list */
-
-/**
- * struct cdmac_bd - LocalLink buffer descriptor format
- *
- * app0 bits:
- * 0 Error
- * 1 IrqOnEnd generate an interrupt at completion of DMA op
- * 2 reserved
- * 3 completed Current descriptor completed
- * 4 SOP TX - marks first desc/ RX marks first desct
- * 5 EOP TX marks last desc/RX marks last desc
- * 6 EngBusy DMA is processing
- * 7 reserved
- * 8:31 application specific
- */
-struct cdmac_bd {
- u32 next; /* Physical address of next buffer descriptor */
- u32 phys;
- u32 len;
- u32 app0;
- u32 app1; /* TX start << 16 | insert */
- u32 app2; /* TX csum */
- u32 app3;
- u32 app4; /* skb for TX length for RX */
-};
-
-struct temac_local {
- struct net_device *ndev;
- struct device *dev;
-
- /* Connection to PHY device */
- struct phy_device *phy_dev; /* Pointer to PHY device */
- struct device_node *phy_node;
-
- /* MDIO bus data */
- struct mii_bus *mii_bus; /* MII bus reference */
- int mdio_irqs[PHY_MAX_ADDR]; /* IRQs table for MDIO bus */
-
- /* IO registers, dma functions and IRQs */
- void __iomem *regs;
- void __iomem *sdma_regs;
-#ifdef CONFIG_PPC_DCR
- dcr_host_t sdma_dcrs;
-#endif
- u32 (*dma_in)(struct temac_local *, int);
- void (*dma_out)(struct temac_local *, int, u32);
-
- int tx_irq;
- int rx_irq;
- int emac_num;
-
- struct sk_buff **rx_skb;
- spinlock_t rx_lock;
- struct mutex indirect_mutex;
- u32 options; /* Current options word */
- int last_link;
- unsigned int temac_features;
-
- /* Buffer descriptors */
- struct cdmac_bd *tx_bd_v;
- dma_addr_t tx_bd_p;
- struct cdmac_bd *rx_bd_v;
- dma_addr_t rx_bd_p;
- int tx_bd_ci;
- int tx_bd_next;
- int tx_bd_tail;
- int rx_bd_ci;
-};
-
-/* xilinx_temac.c */
-u32 temac_ior(struct temac_local *lp, int offset);
-void temac_iow(struct temac_local *lp, int offset, u32 value);
-int temac_indirect_busywait(struct temac_local *lp);
-u32 temac_indirect_in32(struct temac_local *lp, int reg);
-void temac_indirect_out32(struct temac_local *lp, int reg, u32 value);
-
-
-/* xilinx_temac_mdio.c */
-int temac_mdio_setup(struct temac_local *lp, struct device_node *np);
-void temac_mdio_teardown(struct temac_local *lp);
-
-#endif /* XILINX_LL_TEMAC_H */
+++ /dev/null
-/*
- * Driver for Xilinx TEMAC Ethernet device
- *
- * Copyright (c) 2008 Nissin Systems Co., Ltd., Yoshio Kashiwagi
- * Copyright (c) 2005-2008 DLA Systems, David H. Lynch Jr. <dhlii@dlasys.net>
- * Copyright (c) 2008-2009 Secret Lab Technologies Ltd.
- *
- * This is a driver for the Xilinx ll_temac ipcore which is often used
- * in the Virtex and Spartan series of chips.
- *
- * Notes:
- * - The ll_temac hardware uses indirect access for many of the TEMAC
- * registers, include the MDIO bus. However, indirect access to MDIO
- * registers take considerably more clock cycles than to TEMAC registers.
- * MDIO accesses are long, so threads doing them should probably sleep
- * rather than busywait. However, since only one indirect access can be
- * in progress at any given time, that means that *all* indirect accesses
- * could end up sleeping (to wait for an MDIO access to complete).
- * Fortunately none of the indirect accesses are on the 'hot' path for tx
- * or rx, so this should be okay.
- *
- * TODO:
- * - Factor out locallink DMA code into separate driver
- * - Fix multicast assignment.
- * - Fix support for hardware checksumming.
- * - Testing. Lots and lots of testing.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/mii.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/netdevice.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_mdio.h>
-#include <linux/of_platform.h>
-#include <linux/of_address.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/tcp.h> /* needed for sizeof(tcphdr) */
-#include <linux/udp.h> /* needed for sizeof(udphdr) */
-#include <linux/phy.h>
-#include <linux/in.h>
-#include <linux/io.h>
-#include <linux/ip.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-
-#include "ll_temac.h"
-
-#define TX_BD_NUM 64
-#define RX_BD_NUM 128
-
-/* ---------------------------------------------------------------------
- * Low level register access functions
- */
-
-u32 temac_ior(struct temac_local *lp, int offset)
-{
- return in_be32((u32 *)(lp->regs + offset));
-}
-
-void temac_iow(struct temac_local *lp, int offset, u32 value)
-{
- out_be32((u32 *) (lp->regs + offset), value);
-}
-
-int temac_indirect_busywait(struct temac_local *lp)
-{
- long end = jiffies + 2;
-
- while (!(temac_ior(lp, XTE_RDY0_OFFSET) & XTE_RDY0_HARD_ACS_RDY_MASK)) {
- if (end - jiffies <= 0) {
- WARN_ON(1);
- return -ETIMEDOUT;
- }
- msleep(1);
- }
- return 0;
-}
-
-/**
- * temac_indirect_in32
- *
- * lp->indirect_mutex must be held when calling this function
- */
-u32 temac_indirect_in32(struct temac_local *lp, int reg)
-{
- u32 val;
-
- if (temac_indirect_busywait(lp))
- return -ETIMEDOUT;
- temac_iow(lp, XTE_CTL0_OFFSET, reg);
- if (temac_indirect_busywait(lp))
- return -ETIMEDOUT;
- val = temac_ior(lp, XTE_LSW0_OFFSET);
-
- return val;
-}
-
-/**
- * temac_indirect_out32
- *
- * lp->indirect_mutex must be held when calling this function
- */
-void temac_indirect_out32(struct temac_local *lp, int reg, u32 value)
-{
- if (temac_indirect_busywait(lp))
- return;
- temac_iow(lp, XTE_LSW0_OFFSET, value);
- temac_iow(lp, XTE_CTL0_OFFSET, CNTLREG_WRITE_ENABLE_MASK | reg);
-}
-
-/**
- * temac_dma_in32 - Memory mapped DMA read, this function expects a
- * register input that is based on DCR word addresses which
- * are then converted to memory mapped byte addresses
- */
-static u32 temac_dma_in32(struct temac_local *lp, int reg)
-{
- return in_be32((u32 *)(lp->sdma_regs + (reg << 2)));
-}
-
-/**
- * temac_dma_out32 - Memory mapped DMA read, this function expects a
- * register input that is based on DCR word addresses which
- * are then converted to memory mapped byte addresses
- */
-static void temac_dma_out32(struct temac_local *lp, int reg, u32 value)
-{
- out_be32((u32 *)(lp->sdma_regs + (reg << 2)), value);
-}
-
-/* DMA register access functions can be DCR based or memory mapped.
- * The PowerPC 440 is DCR based, the PowerPC 405 and MicroBlaze are both
- * memory mapped.
- */
-#ifdef CONFIG_PPC_DCR
-
-/**
- * temac_dma_dcr_in32 - DCR based DMA read
- */
-static u32 temac_dma_dcr_in(struct temac_local *lp, int reg)
-{
- return dcr_read(lp->sdma_dcrs, reg);
-}
-
-/**
- * temac_dma_dcr_out32 - DCR based DMA write
- */
-static void temac_dma_dcr_out(struct temac_local *lp, int reg, u32 value)
-{
- dcr_write(lp->sdma_dcrs, reg, value);
-}
-
-/**
- * temac_dcr_setup - If the DMA is DCR based, then setup the address and
- * I/O functions
- */
-static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op,
- struct device_node *np)
-{
- unsigned int dcrs;
-
- /* setup the dcr address mapping if it's in the device tree */
-
- dcrs = dcr_resource_start(np, 0);
- if (dcrs != 0) {
- lp->sdma_dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
- lp->dma_in = temac_dma_dcr_in;
- lp->dma_out = temac_dma_dcr_out;
- dev_dbg(&op->dev, "DCR base: %x\n", dcrs);
- return 0;
- }
- /* no DCR in the device tree, indicate a failure */
- return -1;
-}
-
-#else
-
-/*
- * temac_dcr_setup - This is a stub for when DCR is not supported,
- * such as with MicroBlaze
- */
-static int temac_dcr_setup(struct temac_local *lp, struct platform_device *op,
- struct device_node *np)
-{
- return -1;
-}
-
-#endif
-
-/**
- * * temac_dma_bd_release - Release buffer descriptor rings
- */
-static void temac_dma_bd_release(struct net_device *ndev)
-{
- struct temac_local *lp = netdev_priv(ndev);
- int i;
-
- for (i = 0; i < RX_BD_NUM; i++) {
- if (!lp->rx_skb[i])
- break;
- else {
- dma_unmap_single(ndev->dev.parent, lp->rx_bd_v[i].phys,
- XTE_MAX_JUMBO_FRAME_SIZE, DMA_FROM_DEVICE);
- dev_kfree_skb(lp->rx_skb[i]);
- }
- }
- if (lp->rx_bd_v)
- dma_free_coherent(ndev->dev.parent,
- sizeof(*lp->rx_bd_v) * RX_BD_NUM,
- lp->rx_bd_v, lp->rx_bd_p);
- if (lp->tx_bd_v)
- dma_free_coherent(ndev->dev.parent,
- sizeof(*lp->tx_bd_v) * TX_BD_NUM,
- lp->tx_bd_v, lp->tx_bd_p);
- if (lp->rx_skb)
- kfree(lp->rx_skb);
-}
-
-/**
- * temac_dma_bd_init - Setup buffer descriptor rings
- */
-static int temac_dma_bd_init(struct net_device *ndev)
-{
- struct temac_local *lp = netdev_priv(ndev);
- struct sk_buff *skb;
- int i;
-
- lp->rx_skb = kzalloc(sizeof(*lp->rx_skb) * RX_BD_NUM, GFP_KERNEL);
- if (!lp->rx_skb) {
- dev_err(&ndev->dev,
- "can't allocate memory for DMA RX buffer\n");
- goto out;
- }
- /* allocate the tx and rx ring buffer descriptors. */
- /* returns a virtual address and a physical address. */
- lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
- sizeof(*lp->tx_bd_v) * TX_BD_NUM,
- &lp->tx_bd_p, GFP_KERNEL);
- if (!lp->tx_bd_v) {
- dev_err(&ndev->dev,
- "unable to allocate DMA TX buffer descriptors");
- goto out;
- }
- lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent,
- sizeof(*lp->rx_bd_v) * RX_BD_NUM,
- &lp->rx_bd_p, GFP_KERNEL);
- if (!lp->rx_bd_v) {
- dev_err(&ndev->dev,
- "unable to allocate DMA RX buffer descriptors");
- goto out;
- }
-
- memset(lp->tx_bd_v, 0, sizeof(*lp->tx_bd_v) * TX_BD_NUM);
- for (i = 0; i < TX_BD_NUM; i++) {
- lp->tx_bd_v[i].next = lp->tx_bd_p +
- sizeof(*lp->tx_bd_v) * ((i + 1) % TX_BD_NUM);
- }
-
- memset(lp->rx_bd_v, 0, sizeof(*lp->rx_bd_v) * RX_BD_NUM);
- for (i = 0; i < RX_BD_NUM; i++) {
- lp->rx_bd_v[i].next = lp->rx_bd_p +
- sizeof(*lp->rx_bd_v) * ((i + 1) % RX_BD_NUM);
-
- skb = netdev_alloc_skb_ip_align(ndev,
- XTE_MAX_JUMBO_FRAME_SIZE);
-
- if (skb == 0) {
- dev_err(&ndev->dev, "alloc_skb error %d\n", i);
- goto out;
- }
- lp->rx_skb[i] = skb;
- /* returns physical address of skb->data */
- lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent,
- skb->data,
- XTE_MAX_JUMBO_FRAME_SIZE,
- DMA_FROM_DEVICE);
- lp->rx_bd_v[i].len = XTE_MAX_JUMBO_FRAME_SIZE;
- lp->rx_bd_v[i].app0 = STS_CTRL_APP0_IRQONEND;
- }
-
- lp->dma_out(lp, TX_CHNL_CTRL, 0x10220400 |
- CHNL_CTRL_IRQ_EN |
- CHNL_CTRL_IRQ_DLY_EN |
- CHNL_CTRL_IRQ_COAL_EN);
- /* 0x10220483 */
- /* 0x00100483 */
- lp->dma_out(lp, RX_CHNL_CTRL, 0xff070000 |
- CHNL_CTRL_IRQ_EN |
- CHNL_CTRL_IRQ_DLY_EN |
- CHNL_CTRL_IRQ_COAL_EN |
- CHNL_CTRL_IRQ_IOE);
- /* 0xff010283 */
-
- lp->dma_out(lp, RX_CURDESC_PTR, lp->rx_bd_p);
- lp->dma_out(lp, RX_TAILDESC_PTR,
- lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1)));
- lp->dma_out(lp, TX_CURDESC_PTR, lp->tx_bd_p);
-
- return 0;
-
-out:
- temac_dma_bd_release(ndev);
- return -ENOMEM;
-}
-
-/* ---------------------------------------------------------------------
- * net_device_ops
- */
-
-static int temac_set_mac_address(struct net_device *ndev, void *address)
-{
- struct temac_local *lp = netdev_priv(ndev);
-
- if (address)
- memcpy(ndev->dev_addr, address, ETH_ALEN);
-
- if (!is_valid_ether_addr(ndev->dev_addr))
- random_ether_addr(ndev->dev_addr);
-
- /* set up unicast MAC address filter set its mac address */
- mutex_lock(&lp->indirect_mutex);
- temac_indirect_out32(lp, XTE_UAW0_OFFSET,
- (ndev->dev_addr[0]) |
- (ndev->dev_addr[1] << 8) |
- (ndev->dev_addr[2] << 16) |
- (ndev->dev_addr[3] << 24));
- /* There are reserved bits in EUAW1
- * so don't affect them Set MAC bits [47:32] in EUAW1 */
- temac_indirect_out32(lp, XTE_UAW1_OFFSET,
- (ndev->dev_addr[4] & 0x000000ff) |
- (ndev->dev_addr[5] << 8));
- mutex_unlock(&lp->indirect_mutex);
-
- return 0;
-}
-
-static int netdev_set_mac_address(struct net_device *ndev, void *p)
-{
- struct sockaddr *addr = p;
-
- return temac_set_mac_address(ndev, addr->sa_data);
-}
-
-static void temac_set_multicast_list(struct net_device *ndev)
-{
- struct temac_local *lp = netdev_priv(ndev);
- u32 multi_addr_msw, multi_addr_lsw, val;
- int i;
-
- mutex_lock(&lp->indirect_mutex);
- if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) ||
- netdev_mc_count(ndev) > MULTICAST_CAM_TABLE_NUM) {
- /*
- * We must make the kernel realise we had to move
- * into promisc mode or we start all out war on
- * the cable. If it was a promisc request the
- * flag is already set. If not we assert it.
- */
- ndev->flags |= IFF_PROMISC;
- temac_indirect_out32(lp, XTE_AFM_OFFSET, XTE_AFM_EPPRM_MASK);
- dev_info(&ndev->dev, "Promiscuous mode enabled.\n");
- } else if (!netdev_mc_empty(ndev)) {
- struct netdev_hw_addr *ha;
-
- i = 0;
- netdev_for_each_mc_addr(ha, ndev) {
- if (i >= MULTICAST_CAM_TABLE_NUM)
- break;
- multi_addr_msw = ((ha->addr[3] << 24) |
- (ha->addr[2] << 16) |
- (ha->addr[1] << 8) |
- (ha->addr[0]));
- temac_indirect_out32(lp, XTE_MAW0_OFFSET,
- multi_addr_msw);
- multi_addr_lsw = ((ha->addr[5] << 8) |
- (ha->addr[4]) | (i << 16));
- temac_indirect_out32(lp, XTE_MAW1_OFFSET,
- multi_addr_lsw);
- i++;
- }
- } else {
- val = temac_indirect_in32(lp, XTE_AFM_OFFSET);
- temac_indirect_out32(lp, XTE_AFM_OFFSET,
- val & ~XTE_AFM_EPPRM_MASK);
- temac_indirect_out32(lp, XTE_MAW0_OFFSET, 0);
- temac_indirect_out32(lp, XTE_MAW1_OFFSET, 0);
- dev_info(&ndev->dev, "Promiscuous mode disabled.\n");
- }
- mutex_unlock(&lp->indirect_mutex);
-}
-
-struct temac_option {
- int flg;
- u32 opt;
- u32 reg;
- u32 m_or;
- u32 m_and;
-} temac_options[] = {
- /* Turn on jumbo packet support for both Rx and Tx */
- {
- .opt = XTE_OPTION_JUMBO,
- .reg = XTE_TXC_OFFSET,
- .m_or = XTE_TXC_TXJMBO_MASK,
- },
- {
- .opt = XTE_OPTION_JUMBO,
- .reg = XTE_RXC1_OFFSET,
- .m_or =XTE_RXC1_RXJMBO_MASK,
- },
- /* Turn on VLAN packet support for both Rx and Tx */
- {
- .opt = XTE_OPTION_VLAN,
- .reg = XTE_TXC_OFFSET,
- .m_or =XTE_TXC_TXVLAN_MASK,
- },
- {
- .opt = XTE_OPTION_VLAN,
- .reg = XTE_RXC1_OFFSET,
- .m_or =XTE_RXC1_RXVLAN_MASK,
- },
- /* Turn on FCS stripping on receive packets */
- {
- .opt = XTE_OPTION_FCS_STRIP,
- .reg = XTE_RXC1_OFFSET,
- .m_or =XTE_RXC1_RXFCS_MASK,
- },
- /* Turn on FCS insertion on transmit packets */
- {
- .opt = XTE_OPTION_FCS_INSERT,
- .reg = XTE_TXC_OFFSET,
- .m_or =XTE_TXC_TXFCS_MASK,
- },
- /* Turn on length/type field checking on receive packets */
- {
- .opt = XTE_OPTION_LENTYPE_ERR,
- .reg = XTE_RXC1_OFFSET,
- .m_or =XTE_RXC1_RXLT_MASK,
- },
- /* Turn on flow control */
- {
- .opt = XTE_OPTION_FLOW_CONTROL,
- .reg = XTE_FCC_OFFSET,
- .m_or =XTE_FCC_RXFLO_MASK,
- },
- /* Turn on flow control */
- {
- .opt = XTE_OPTION_FLOW_CONTROL,
- .reg = XTE_FCC_OFFSET,
- .m_or =XTE_FCC_TXFLO_MASK,
- },
- /* Turn on promiscuous frame filtering (all frames are received ) */
- {
- .opt = XTE_OPTION_PROMISC,
- .reg = XTE_AFM_OFFSET,
- .m_or =XTE_AFM_EPPRM_MASK,
- },
- /* Enable transmitter if not already enabled */
- {
- .opt = XTE_OPTION_TXEN,
- .reg = XTE_TXC_OFFSET,
- .m_or =XTE_TXC_TXEN_MASK,
- },
- /* Enable receiver? */
- {
- .opt = XTE_OPTION_RXEN,
- .reg = XTE_RXC1_OFFSET,
- .m_or =XTE_RXC1_RXEN_MASK,
- },
- {}
-};
-
-/**
- * temac_setoptions
- */
-static u32 temac_setoptions(struct net_device *ndev, u32 options)
-{
- struct temac_local *lp = netdev_priv(ndev);
- struct temac_option *tp = &temac_options[0];
- int reg;
-
- mutex_lock(&lp->indirect_mutex);
- while (tp->opt) {
- reg = temac_indirect_in32(lp, tp->reg) & ~tp->m_or;
- if (options & tp->opt)
- reg |= tp->m_or;
- temac_indirect_out32(lp, tp->reg, reg);
- tp++;
- }
- lp->options |= options;
- mutex_unlock(&lp->indirect_mutex);
-
- return 0;
-}
-
-/* Initialize temac */
-static void temac_device_reset(struct net_device *ndev)
-{
- struct temac_local *lp = netdev_priv(ndev);
- u32 timeout;
- u32 val;
-
- /* Perform a software reset */
-
- /* 0x300 host enable bit ? */
- /* reset PHY through control register ?:1 */
-
- dev_dbg(&ndev->dev, "%s()\n", __func__);
-
- mutex_lock(&lp->indirect_mutex);
- /* Reset the receiver and wait for it to finish reset */
- temac_indirect_out32(lp, XTE_RXC1_OFFSET, XTE_RXC1_RXRST_MASK);
- timeout = 1000;
- while (temac_indirect_in32(lp, XTE_RXC1_OFFSET) & XTE_RXC1_RXRST_MASK) {
- udelay(1);
- if (--timeout == 0) {
- dev_err(&ndev->dev,
- "temac_device_reset RX reset timeout!!\n");
- break;
- }
- }
-
- /* Reset the transmitter and wait for it to finish reset */
- temac_indirect_out32(lp, XTE_TXC_OFFSET, XTE_TXC_TXRST_MASK);
- timeout = 1000;
- while (temac_indirect_in32(lp, XTE_TXC_OFFSET) & XTE_TXC_TXRST_MASK) {
- udelay(1);
- if (--timeout == 0) {
- dev_err(&ndev->dev,
- "temac_device_reset TX reset timeout!!\n");
- break;
- }
- }
-
- /* Disable the receiver */
- val = temac_indirect_in32(lp, XTE_RXC1_OFFSET);
- temac_indirect_out32(lp, XTE_RXC1_OFFSET, val & ~XTE_RXC1_RXEN_MASK);
-
- /* Reset Local Link (DMA) */
- lp->dma_out(lp, DMA_CONTROL_REG, DMA_CONTROL_RST);
- timeout = 1000;
- while (lp->dma_in(lp, DMA_CONTROL_REG) & DMA_CONTROL_RST) {
- udelay(1);
- if (--timeout == 0) {
- dev_err(&ndev->dev,
- "temac_device_reset DMA reset timeout!!\n");
- break;
- }
- }
- lp->dma_out(lp, DMA_CONTROL_REG, DMA_TAIL_ENABLE);
-
- if (temac_dma_bd_init(ndev)) {
- dev_err(&ndev->dev,
- "temac_device_reset descriptor allocation failed\n");
- }
-
- temac_indirect_out32(lp, XTE_RXC0_OFFSET, 0);
- temac_indirect_out32(lp, XTE_RXC1_OFFSET, 0);
- temac_indirect_out32(lp, XTE_TXC_OFFSET, 0);
- temac_indirect_out32(lp, XTE_FCC_OFFSET, XTE_FCC_RXFLO_MASK);
-
- mutex_unlock(&lp->indirect_mutex);
-
- /* Sync default options with HW
- * but leave receiver and transmitter disabled. */
- temac_setoptions(ndev,
- lp->options & ~(XTE_OPTION_TXEN | XTE_OPTION_RXEN));
-
- temac_set_mac_address(ndev, NULL);
-
- /* Set address filter table */
- temac_set_multicast_list(ndev);
- if (temac_setoptions(ndev, lp->options))
- dev_err(&ndev->dev, "Error setting TEMAC options\n");
-
- /* Init Driver variable */
- ndev->trans_start = jiffies; /* prevent tx timeout */
-}
-
-void temac_adjust_link(struct net_device *ndev)
-{
- struct temac_local *lp = netdev_priv(ndev);
- struct phy_device *phy = lp->phy_dev;
- u32 mii_speed;
- int link_state;
-
- /* hash together the state values to decide if something has changed */
- link_state = phy->speed | (phy->duplex << 1) | phy->link;
-
- mutex_lock(&lp->indirect_mutex);
- if (lp->last_link != link_state) {
- mii_speed = temac_indirect_in32(lp, XTE_EMCFG_OFFSET);
- mii_speed &= ~XTE_EMCFG_LINKSPD_MASK;
-
- switch (phy->speed) {
- case SPEED_1000: mii_speed |= XTE_EMCFG_LINKSPD_1000; break;
- case SPEED_100: mii_speed |= XTE_EMCFG_LINKSPD_100; break;
- case SPEED_10: mii_speed |= XTE_EMCFG_LINKSPD_10; break;
- }
-
- /* Write new speed setting out to TEMAC */
- temac_indirect_out32(lp, XTE_EMCFG_OFFSET, mii_speed);
- lp->last_link = link_state;
- phy_print_status(phy);
- }
- mutex_unlock(&lp->indirect_mutex);
-}
-
-static void temac_start_xmit_done(struct net_device *ndev)
-{
- struct temac_local *lp = netdev_priv(ndev);
- struct cdmac_bd *cur_p;
- unsigned int stat = 0;
-
- cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
- stat = cur_p->app0;
-
- while (stat & STS_CTRL_APP0_CMPLT) {
- dma_unmap_single(ndev->dev.parent, cur_p->phys, cur_p->len,
- DMA_TO_DEVICE);
- if (cur_p->app4)
- dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
- cur_p->app0 = 0;
- cur_p->app1 = 0;
- cur_p->app2 = 0;
- cur_p->app3 = 0;
- cur_p->app4 = 0;
-
- ndev->stats.tx_packets++;
- ndev->stats.tx_bytes += cur_p->len;
-
- lp->tx_bd_ci++;
- if (lp->tx_bd_ci >= TX_BD_NUM)
- lp->tx_bd_ci = 0;
-
- cur_p = &lp->tx_bd_v[lp->tx_bd_ci];
- stat = cur_p->app0;
- }
-
- netif_wake_queue(ndev);
-}
-
-static inline int temac_check_tx_bd_space(struct temac_local *lp, int num_frag)
-{
- struct cdmac_bd *cur_p;
- int tail;
-
- tail = lp->tx_bd_tail;
- cur_p = &lp->tx_bd_v[tail];
-
- do {
- if (cur_p->app0)
- return NETDEV_TX_BUSY;
-
- tail++;
- if (tail >= TX_BD_NUM)
- tail = 0;
-
- cur_p = &lp->tx_bd_v[tail];
- num_frag--;
- } while (num_frag >= 0);
-
- return 0;
-}
-
-static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
-{
- struct temac_local *lp = netdev_priv(ndev);
- struct cdmac_bd *cur_p;
- dma_addr_t start_p, tail_p;
- int ii;
- unsigned long num_frag;
- skb_frag_t *frag;
-
- num_frag = skb_shinfo(skb)->nr_frags;
- frag = &skb_shinfo(skb)->frags[0];
- start_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
- cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
-
- if (temac_check_tx_bd_space(lp, num_frag)) {
- if (!netif_queue_stopped(ndev)) {
- netif_stop_queue(ndev);
- return NETDEV_TX_BUSY;
- }
- return NETDEV_TX_BUSY;
- }
-
- cur_p->app0 = 0;
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- unsigned int csum_start_off = skb_checksum_start_offset(skb);
- unsigned int csum_index_off = csum_start_off + skb->csum_offset;
-
- cur_p->app0 |= 1; /* TX Checksum Enabled */
- cur_p->app1 = (csum_start_off << 16) | csum_index_off;
- cur_p->app2 = 0; /* initial checksum seed */
- }
-
- cur_p->app0 |= STS_CTRL_APP0_SOP;
- cur_p->len = skb_headlen(skb);
- cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, skb->len,
- DMA_TO_DEVICE);
- cur_p->app4 = (unsigned long)skb;
-
- for (ii = 0; ii < num_frag; ii++) {
- lp->tx_bd_tail++;
- if (lp->tx_bd_tail >= TX_BD_NUM)
- lp->tx_bd_tail = 0;
-
- cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
- cur_p->phys = dma_map_single(ndev->dev.parent,
- (void *)page_address(frag->page) +
- frag->page_offset,
- frag->size, DMA_TO_DEVICE);
- cur_p->len = frag->size;
- cur_p->app0 = 0;
- frag++;
- }
- cur_p->app0 |= STS_CTRL_APP0_EOP;
-
- tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail;
- lp->tx_bd_tail++;
- if (lp->tx_bd_tail >= TX_BD_NUM)
- lp->tx_bd_tail = 0;
-
- skb_tx_timestamp(skb);
-
- /* Kick off the transfer */
- lp->dma_out(lp, TX_TAILDESC_PTR, tail_p); /* DMA start */
-
- return NETDEV_TX_OK;
-}
-
-
-static void ll_temac_recv(struct net_device *ndev)
-{
- struct temac_local *lp = netdev_priv(ndev);
- struct sk_buff *skb, *new_skb;
- unsigned int bdstat;
- struct cdmac_bd *cur_p;
- dma_addr_t tail_p;
- int length;
- unsigned long flags;
-
- spin_lock_irqsave(&lp->rx_lock, flags);
-
- tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci;
- cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
-
- bdstat = cur_p->app0;
- while ((bdstat & STS_CTRL_APP0_CMPLT)) {
-
- skb = lp->rx_skb[lp->rx_bd_ci];
- length = cur_p->app4 & 0x3FFF;
-
- dma_unmap_single(ndev->dev.parent, cur_p->phys, length,
- DMA_FROM_DEVICE);
-
- skb_put(skb, length);
- skb->dev = ndev;
- skb->protocol = eth_type_trans(skb, ndev);
- skb_checksum_none_assert(skb);
-
- /* if we're doing rx csum offload, set it up */
- if (((lp->temac_features & TEMAC_FEATURE_RX_CSUM) != 0) &&
- (skb->protocol == __constant_htons(ETH_P_IP)) &&
- (skb->len > 64)) {
-
- skb->csum = cur_p->app3 & 0xFFFF;
- skb->ip_summed = CHECKSUM_COMPLETE;
- }
-
- if (!skb_defer_rx_timestamp(skb))
- netif_rx(skb);
-
- ndev->stats.rx_packets++;
- ndev->stats.rx_bytes += length;
-
- new_skb = netdev_alloc_skb_ip_align(ndev,
- XTE_MAX_JUMBO_FRAME_SIZE);
-
- if (new_skb == 0) {
- dev_err(&ndev->dev, "no memory for new sk_buff\n");
- spin_unlock_irqrestore(&lp->rx_lock, flags);
- return;
- }
-
- cur_p->app0 = STS_CTRL_APP0_IRQONEND;
- cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data,
- XTE_MAX_JUMBO_FRAME_SIZE,
- DMA_FROM_DEVICE);
- cur_p->len = XTE_MAX_JUMBO_FRAME_SIZE;
- lp->rx_skb[lp->rx_bd_ci] = new_skb;
-
- lp->rx_bd_ci++;
- if (lp->rx_bd_ci >= RX_BD_NUM)
- lp->rx_bd_ci = 0;
-
- cur_p = &lp->rx_bd_v[lp->rx_bd_ci];
- bdstat = cur_p->app0;
- }
- lp->dma_out(lp, RX_TAILDESC_PTR, tail_p);
-
- spin_unlock_irqrestore(&lp->rx_lock, flags);
-}
-
-static irqreturn_t ll_temac_tx_irq(int irq, void *_ndev)
-{
- struct net_device *ndev = _ndev;
- struct temac_local *lp = netdev_priv(ndev);
- unsigned int status;
-
- status = lp->dma_in(lp, TX_IRQ_REG);
- lp->dma_out(lp, TX_IRQ_REG, status);
-
- if (status & (IRQ_COAL | IRQ_DLY))
- temac_start_xmit_done(lp->ndev);
- if (status & 0x080)
- dev_err(&ndev->dev, "DMA error 0x%x\n", status);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t ll_temac_rx_irq(int irq, void *_ndev)
-{
- struct net_device *ndev = _ndev;
- struct temac_local *lp = netdev_priv(ndev);
- unsigned int status;
-
- /* Read and clear the status registers */
- status = lp->dma_in(lp, RX_IRQ_REG);
- lp->dma_out(lp, RX_IRQ_REG, status);
-
- if (status & (IRQ_COAL | IRQ_DLY))
- ll_temac_recv(lp->ndev);
-
- return IRQ_HANDLED;
-}
-
-static int temac_open(struct net_device *ndev)
-{
- struct temac_local *lp = netdev_priv(ndev);
- int rc;
-
- dev_dbg(&ndev->dev, "temac_open()\n");
-
- if (lp->phy_node) {
- lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
- temac_adjust_link, 0, 0);
- if (!lp->phy_dev) {
- dev_err(lp->dev, "of_phy_connect() failed\n");
- return -ENODEV;
- }
-
- phy_start(lp->phy_dev);
- }
-
- rc = request_irq(lp->tx_irq, ll_temac_tx_irq, 0, ndev->name, ndev);
- if (rc)
- goto err_tx_irq;
- rc = request_irq(lp->rx_irq, ll_temac_rx_irq, 0, ndev->name, ndev);
- if (rc)
- goto err_rx_irq;
-
- temac_device_reset(ndev);
- return 0;
-
- err_rx_irq:
- free_irq(lp->tx_irq, ndev);
- err_tx_irq:
- if (lp->phy_dev)
- phy_disconnect(lp->phy_dev);
- lp->phy_dev = NULL;
- dev_err(lp->dev, "request_irq() failed\n");
- return rc;
-}
-
-static int temac_stop(struct net_device *ndev)
-{
- struct temac_local *lp = netdev_priv(ndev);
-
- dev_dbg(&ndev->dev, "temac_close()\n");
-
- free_irq(lp->tx_irq, ndev);
- free_irq(lp->rx_irq, ndev);
-
- if (lp->phy_dev)
- phy_disconnect(lp->phy_dev);
- lp->phy_dev = NULL;
-
- temac_dma_bd_release(ndev);
-
- return 0;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void
-temac_poll_controller(struct net_device *ndev)
-{
- struct temac_local *lp = netdev_priv(ndev);
-
- disable_irq(lp->tx_irq);
- disable_irq(lp->rx_irq);
-
- ll_temac_rx_irq(lp->tx_irq, ndev);
- ll_temac_tx_irq(lp->rx_irq, ndev);
-
- enable_irq(lp->tx_irq);
- enable_irq(lp->rx_irq);
-}
-#endif
-
-static const struct net_device_ops temac_netdev_ops = {
- .ndo_open = temac_open,
- .ndo_stop = temac_stop,
- .ndo_start_xmit = temac_start_xmit,
- .ndo_set_mac_address = netdev_set_mac_address,
- .ndo_validate_addr = eth_validate_addr,
- //.ndo_set_multicast_list = temac_set_multicast_list,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = temac_poll_controller,
-#endif
-};
-
-/* ---------------------------------------------------------------------
- * SYSFS device attributes
- */
-static ssize_t temac_show_llink_regs(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct net_device *ndev = dev_get_drvdata(dev);
- struct temac_local *lp = netdev_priv(ndev);
- int i, len = 0;
-
- for (i = 0; i < 0x11; i++)
- len += sprintf(buf + len, "%.8x%s", lp->dma_in(lp, i),
- (i % 8) == 7 ? "\n" : " ");
- len += sprintf(buf + len, "\n");
-
- return len;
-}
-
-static DEVICE_ATTR(llink_regs, 0440, temac_show_llink_regs, NULL);
-
-static struct attribute *temac_device_attrs[] = {
- &dev_attr_llink_regs.attr,
- NULL,
-};
-
-static const struct attribute_group temac_attr_group = {
- .attrs = temac_device_attrs,
-};
-
-static int __devinit temac_of_probe(struct platform_device *op)
-{
- struct device_node *np;
- struct temac_local *lp;
- struct net_device *ndev;
- const void *addr;
- __be32 *p;
- int size, rc = 0;
-
- /* Init network device structure */
- ndev = alloc_etherdev(sizeof(*lp));
- if (!ndev) {
- dev_err(&op->dev, "could not allocate device.\n");
- return -ENOMEM;
- }
- ether_setup(ndev);
- dev_set_drvdata(&op->dev, ndev);
- SET_NETDEV_DEV(ndev, &op->dev);
- ndev->flags &= ~IFF_MULTICAST; /* clear multicast */
- ndev->features = NETIF_F_SG | NETIF_F_FRAGLIST;
- ndev->netdev_ops = &temac_netdev_ops;
-#if 0
- ndev->features |= NETIF_F_IP_CSUM; /* Can checksum TCP/UDP over IPv4. */
- ndev->features |= NETIF_F_HW_CSUM; /* Can checksum all the packets. */
- ndev->features |= NETIF_F_IPV6_CSUM; /* Can checksum IPV6 TCP/UDP */
- ndev->features |= NETIF_F_HIGHDMA; /* Can DMA to high memory. */
- ndev->features |= NETIF_F_HW_VLAN_TX; /* Transmit VLAN hw accel */
- ndev->features |= NETIF_F_HW_VLAN_RX; /* Receive VLAN hw acceleration */
- ndev->features |= NETIF_F_HW_VLAN_FILTER; /* Receive VLAN filtering */
- ndev->features |= NETIF_F_VLAN_CHALLENGED; /* cannot handle VLAN pkts */
- ndev->features |= NETIF_F_GSO; /* Enable software GSO. */
- ndev->features |= NETIF_F_MULTI_QUEUE; /* Has multiple TX/RX queues */
- ndev->features |= NETIF_F_LRO; /* large receive offload */
-#endif
-
- /* setup temac private info structure */
- lp = netdev_priv(ndev);
- lp->ndev = ndev;
- lp->dev = &op->dev;
- lp->options = XTE_OPTION_DEFAULTS;
- spin_lock_init(&lp->rx_lock);
- mutex_init(&lp->indirect_mutex);
-
- /* map device registers */
- lp->regs = of_iomap(op->dev.of_node, 0);
- if (!lp->regs) {
- dev_err(&op->dev, "could not map temac regs.\n");
- goto nodev;
- }
-
- /* Setup checksum offload, but default to off if not specified */
- lp->temac_features = 0;
- p = (__be32 *)of_get_property(op->dev.of_node, "xlnx,txcsum", NULL);
- if (p && be32_to_cpu(*p)) {
- lp->temac_features |= TEMAC_FEATURE_TX_CSUM;
- /* Can checksum TCP/UDP over IPv4. */
- ndev->features |= NETIF_F_IP_CSUM;
- }
- p = (__be32 *)of_get_property(op->dev.of_node, "xlnx,rxcsum", NULL);
- if (p && be32_to_cpu(*p))
- lp->temac_features |= TEMAC_FEATURE_RX_CSUM;
-
- /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */
- np = of_parse_phandle(op->dev.of_node, "llink-connected", 0);
- if (!np) {
- dev_err(&op->dev, "could not find DMA node\n");
- goto err_iounmap;
- }
-
- /* Setup the DMA register accesses, could be DCR or memory mapped */
- if (temac_dcr_setup(lp, op, np)) {
-
- /* no DCR in the device tree, try non-DCR */
- lp->sdma_regs = of_iomap(np, 0);
- if (lp->sdma_regs) {
- lp->dma_in = temac_dma_in32;
- lp->dma_out = temac_dma_out32;
- dev_dbg(&op->dev, "MEM base: %p\n", lp->sdma_regs);
- } else {
- dev_err(&op->dev, "unable to map DMA registers\n");
- of_node_put(np);
- goto err_iounmap;
- }
- }
-
- lp->rx_irq = irq_of_parse_and_map(np, 0);
- lp->tx_irq = irq_of_parse_and_map(np, 1);
-
- of_node_put(np); /* Finished with the DMA node; drop the reference */
-
- if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) {
- dev_err(&op->dev, "could not determine irqs\n");
- rc = -ENOMEM;
- goto err_iounmap_2;
- }
-
-
- /* Retrieve the MAC address */
- addr = of_get_property(op->dev.of_node, "local-mac-address", &size);
- if ((!addr) || (size != 6)) {
- dev_err(&op->dev, "could not find MAC address\n");
- rc = -ENODEV;
- goto err_iounmap_2;
- }
- temac_set_mac_address(ndev, (void *)addr);
-
- rc = temac_mdio_setup(lp, op->dev.of_node);
- if (rc)
- dev_warn(&op->dev, "error registering MDIO bus\n");
-
- lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0);
- if (lp->phy_node)
- dev_dbg(lp->dev, "using PHY node %s (%p)\n", np->full_name, np);
-
- /* Add the device attributes */
- rc = sysfs_create_group(&lp->dev->kobj, &temac_attr_group);
- if (rc) {
- dev_err(lp->dev, "Error creating sysfs files\n");
- goto err_iounmap_2;
- }
-
- rc = register_netdev(lp->ndev);
- if (rc) {
- dev_err(lp->dev, "register_netdev() error (%i)\n", rc);
- goto err_register_ndev;
- }
-
- return 0;
-
- err_register_ndev:
- sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
- err_iounmap_2:
- if (lp->sdma_regs)
- iounmap(lp->sdma_regs);
- err_iounmap:
- iounmap(lp->regs);
- nodev:
- free_netdev(ndev);
- ndev = NULL;
- return rc;
-}
-
-static int __devexit temac_of_remove(struct platform_device *op)
-{
- struct net_device *ndev = dev_get_drvdata(&op->dev);
- struct temac_local *lp = netdev_priv(ndev);
-
- temac_mdio_teardown(lp);
- unregister_netdev(ndev);
- sysfs_remove_group(&lp->dev->kobj, &temac_attr_group);
- if (lp->phy_node)
- of_node_put(lp->phy_node);
- lp->phy_node = NULL;
- dev_set_drvdata(&op->dev, NULL);
- iounmap(lp->regs);
- if (lp->sdma_regs)
- iounmap(lp->sdma_regs);
- free_netdev(ndev);
- return 0;
-}
-
-static struct of_device_id temac_of_match[] __devinitdata = {
- { .compatible = "xlnx,xps-ll-temac-1.01.b", },
- { .compatible = "xlnx,xps-ll-temac-2.00.a", },
- { .compatible = "xlnx,xps-ll-temac-2.02.a", },
- { .compatible = "xlnx,xps-ll-temac-2.03.a", },
- {},
-};
-MODULE_DEVICE_TABLE(of, temac_of_match);
-
-static struct platform_driver temac_of_driver = {
- .probe = temac_of_probe,
- .remove = __devexit_p(temac_of_remove),
- .driver = {
- .owner = THIS_MODULE,
- .name = "xilinx_temac",
- .of_match_table = temac_of_match,
- },
-};
-
-static int __init temac_init(void)
-{
- return platform_driver_register(&temac_of_driver);
-}
-module_init(temac_init);
-
-static void __exit temac_exit(void)
-{
- platform_driver_unregister(&temac_of_driver);
-}
-module_exit(temac_exit);
-
-MODULE_DESCRIPTION("Xilinx LL_TEMAC Ethernet driver");
-MODULE_AUTHOR("Yoshio Kashiwagi");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * MDIO bus driver for the Xilinx TEMAC device
- *
- * Copyright (c) 2009 Secret Lab Technologies, Ltd.
- */
-
-#include <linux/io.h>
-#include <linux/netdevice.h>
-#include <linux/mutex.h>
-#include <linux/phy.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_address.h>
-#include <linux/slab.h>
-#include <linux/of_mdio.h>
-
-#include "ll_temac.h"
-
-/* ---------------------------------------------------------------------
- * MDIO Bus functions
- */
-static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
-{
- struct temac_local *lp = bus->priv;
- u32 rc;
-
- /* Write the PHY address to the MIIM Access Initiator register.
- * When the transfer completes, the PHY register value will appear
- * in the LSW0 register */
- mutex_lock(&lp->indirect_mutex);
- temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
- rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET);
- mutex_unlock(&lp->indirect_mutex);
-
- dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n",
- phy_id, reg, rc);
-
- return rc;
-}
-
-static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
-{
- struct temac_local *lp = bus->priv;
-
- dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
- phy_id, reg, val);
-
- /* First write the desired value into the write data register
- * and then write the address into the access initiator register
- */
- mutex_lock(&lp->indirect_mutex);
- temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val);
- temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
- mutex_unlock(&lp->indirect_mutex);
-
- return 0;
-}
-
-int temac_mdio_setup(struct temac_local *lp, struct device_node *np)
-{
- struct mii_bus *bus;
- const u32 *bus_hz;
- int clk_div;
- int rc, size;
- struct resource res;
-
- /* Calculate a reasonable divisor for the clock rate */
- clk_div = 0x3f; /* worst-case default setting */
- bus_hz = of_get_property(np, "clock-frequency", &size);
- if (bus_hz && size >= sizeof(*bus_hz)) {
- clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1;
- if (clk_div < 1)
- clk_div = 1;
- if (clk_div > 0x3f)
- clk_div = 0x3f;
- }
-
- /* Enable the MDIO bus by asserting the enable bit and writing
- * in the clock config */
- mutex_lock(&lp->indirect_mutex);
- temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
- mutex_unlock(&lp->indirect_mutex);
-
- bus = mdiobus_alloc();
- if (!bus)
- return -ENOMEM;
-
- of_address_to_resource(np, 0, &res);
- snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
- (unsigned long long)res.start);
- bus->priv = lp;
- bus->name = "Xilinx TEMAC MDIO";
- bus->read = temac_mdio_read;
- bus->write = temac_mdio_write;
- bus->parent = lp->dev;
- bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
-
- lp->mii_bus = bus;
-
- rc = of_mdiobus_register(bus, np);
- if (rc)
- goto err_register;
-
- mutex_lock(&lp->indirect_mutex);
- dev_dbg(lp->dev, "MDIO bus registered; MC:%x\n",
- temac_indirect_in32(lp, XTE_MC_OFFSET));
- mutex_unlock(&lp->indirect_mutex);
- return 0;
-
- err_register:
- mdiobus_free(bus);
- return rc;
-}
-
-void temac_mdio_teardown(struct temac_local *lp)
-{
- mdiobus_unregister(lp->mii_bus);
- kfree(lp->mii_bus->irq);
- mdiobus_free(lp->mii_bus);
- lp->mii_bus = NULL;
-}
-
+++ /dev/null
-/*
- * Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device.
- *
- * This is a new flat driver which is based on the original emac_lite
- * driver from John Williams <john.williams@petalogix.com>.
- *
- * 2007-2009 (c) Xilinx, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/uaccess.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-#include <linux/of_mdio.h>
-#include <linux/of_net.h>
-#include <linux/phy.h>
-#include <linux/interrupt.h>
-
-#define DRIVER_NAME "xilinx_emaclite"
-
-/* Register offsets for the EmacLite Core */
-#define XEL_TXBUFF_OFFSET 0x0 /* Transmit Buffer */
-#define XEL_MDIOADDR_OFFSET 0x07E4 /* MDIO Address Register */
-#define XEL_MDIOWR_OFFSET 0x07E8 /* MDIO Write Data Register */
-#define XEL_MDIORD_OFFSET 0x07EC /* MDIO Read Data Register */
-#define XEL_MDIOCTRL_OFFSET 0x07F0 /* MDIO Control Register */
-#define XEL_GIER_OFFSET 0x07F8 /* GIE Register */
-#define XEL_TSR_OFFSET 0x07FC /* Tx status */
-#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */
-
-#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */
-#define XEL_RPLR_OFFSET 0x100C /* Rx packet length */
-#define XEL_RSR_OFFSET 0x17FC /* Rx status */
-
-#define XEL_BUFFER_OFFSET 0x0800 /* Next Tx/Rx buffer's offset */
-
-/* MDIO Address Register Bit Masks */
-#define XEL_MDIOADDR_REGADR_MASK 0x0000001F /* Register Address */
-#define XEL_MDIOADDR_PHYADR_MASK 0x000003E0 /* PHY Address */
-#define XEL_MDIOADDR_PHYADR_SHIFT 5
-#define XEL_MDIOADDR_OP_MASK 0x00000400 /* RD/WR Operation */
-
-/* MDIO Write Data Register Bit Masks */
-#define XEL_MDIOWR_WRDATA_MASK 0x0000FFFF /* Data to be Written */
-
-/* MDIO Read Data Register Bit Masks */
-#define XEL_MDIORD_RDDATA_MASK 0x0000FFFF /* Data to be Read */
-
-/* MDIO Control Register Bit Masks */
-#define XEL_MDIOCTRL_MDIOSTS_MASK 0x00000001 /* MDIO Status Mask */
-#define XEL_MDIOCTRL_MDIOEN_MASK 0x00000008 /* MDIO Enable */
-
-/* Global Interrupt Enable Register (GIER) Bit Masks */
-#define XEL_GIER_GIE_MASK 0x80000000 /* Global Enable */
-
-/* Transmit Status Register (TSR) Bit Masks */
-#define XEL_TSR_XMIT_BUSY_MASK 0x00000001 /* Tx complete */
-#define XEL_TSR_PROGRAM_MASK 0x00000002 /* Program the MAC address */
-#define XEL_TSR_XMIT_IE_MASK 0x00000008 /* Tx interrupt enable bit */
-#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000 /* Buffer is active, SW bit
- * only. This is not documented
- * in the HW spec */
-
-/* Define for programming the MAC address into the EmacLite */
-#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
-
-/* Receive Status Register (RSR) */
-#define XEL_RSR_RECV_DONE_MASK 0x00000001 /* Rx complete */
-#define XEL_RSR_RECV_IE_MASK 0x00000008 /* Rx interrupt enable bit */
-
-/* Transmit Packet Length Register (TPLR) */
-#define XEL_TPLR_LENGTH_MASK 0x0000FFFF /* Tx packet length */
-
-/* Receive Packet Length Register (RPLR) */
-#define XEL_RPLR_LENGTH_MASK 0x0000FFFF /* Rx packet length */
-
-#define XEL_HEADER_OFFSET 12 /* Offset to length field */
-#define XEL_HEADER_SHIFT 16 /* Shift value for length */
-
-/* General Ethernet Definitions */
-#define XEL_ARP_PACKET_SIZE 28 /* Max ARP packet size */
-#define XEL_HEADER_IP_LENGTH_OFFSET 16 /* IP Length Offset */
-
-
-
-#define TX_TIMEOUT (60*HZ) /* Tx timeout is 60 seconds. */
-#define ALIGNMENT 4
-
-/* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */
-#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT)
-
-/**
- * struct net_local - Our private per device data
- * @ndev: instance of the network device
- * @tx_ping_pong: indicates whether Tx Pong buffer is configured in HW
- * @rx_ping_pong: indicates whether Rx Pong buffer is configured in HW
- * @next_tx_buf_to_use: next Tx buffer to write to
- * @next_rx_buf_to_use: next Rx buffer to read from
- * @base_addr: base address of the Emaclite device
- * @reset_lock: lock used for synchronization
- * @deferred_skb: holds an skb (for transmission at a later time) when the
- * Tx buffer is not free
- * @phy_dev: pointer to the PHY device
- * @phy_node: pointer to the PHY device node
- * @mii_bus: pointer to the MII bus
- * @mdio_irqs: IRQs table for MDIO bus
- * @last_link: last link status
- * @has_mdio: indicates whether MDIO is included in the HW
- */
-struct net_local {
-
- struct net_device *ndev;
-
- bool tx_ping_pong;
- bool rx_ping_pong;
- u32 next_tx_buf_to_use;
- u32 next_rx_buf_to_use;
- void __iomem *base_addr;
-
- spinlock_t reset_lock;
- struct sk_buff *deferred_skb;
-
- struct phy_device *phy_dev;
- struct device_node *phy_node;
-
- struct mii_bus *mii_bus;
- int mdio_irqs[PHY_MAX_ADDR];
-
- int last_link;
- bool has_mdio;
-};
-
-
-/*************************/
-/* EmacLite driver calls */
-/*************************/
-
-/**
- * xemaclite_enable_interrupts - Enable the interrupts for the EmacLite device
- * @drvdata: Pointer to the Emaclite device private data
- *
- * This function enables the Tx and Rx interrupts for the Emaclite device along
- * with the Global Interrupt Enable.
- */
-static void xemaclite_enable_interrupts(struct net_local *drvdata)
-{
- u32 reg_data;
-
- /* Enable the Tx interrupts for the first Buffer */
- reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
- reg_data | XEL_TSR_XMIT_IE_MASK);
-
- /* Enable the Tx interrupts for the second Buffer if
- * configured in HW */
- if (drvdata->tx_ping_pong != 0) {
- reg_data = in_be32(drvdata->base_addr +
- XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET,
- reg_data | XEL_TSR_XMIT_IE_MASK);
- }
-
- /* Enable the Rx interrupts for the first buffer */
- out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
- XEL_RSR_RECV_IE_MASK);
-
- /* Enable the Rx interrupts for the second Buffer if
- * configured in HW */
- if (drvdata->rx_ping_pong != 0) {
- out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET,
- XEL_RSR_RECV_IE_MASK);
- }
-
- /* Enable the Global Interrupt Enable */
- out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
-}
-
-/**
- * xemaclite_disable_interrupts - Disable the interrupts for the EmacLite device
- * @drvdata: Pointer to the Emaclite device private data
- *
- * This function disables the Tx and Rx interrupts for the Emaclite device,
- * along with the Global Interrupt Enable.
- */
-static void xemaclite_disable_interrupts(struct net_local *drvdata)
-{
- u32 reg_data;
-
- /* Disable the Global Interrupt Enable */
- out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
-
- /* Disable the Tx interrupts for the first buffer */
- reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
- reg_data & (~XEL_TSR_XMIT_IE_MASK));
-
- /* Disable the Tx interrupts for the second Buffer
- * if configured in HW */
- if (drvdata->tx_ping_pong != 0) {
- reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_TSR_OFFSET,
- reg_data & (~XEL_TSR_XMIT_IE_MASK));
- }
-
- /* Disable the Rx interrupts for the first buffer */
- reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
- reg_data & (~XEL_RSR_RECV_IE_MASK));
-
- /* Disable the Rx interrupts for the second buffer
- * if configured in HW */
- if (drvdata->rx_ping_pong != 0) {
-
- reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET);
- out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET,
- reg_data & (~XEL_RSR_RECV_IE_MASK));
- }
-}
-
-/**
- * xemaclite_aligned_write - Write from 16-bit aligned to 32-bit aligned address
- * @src_ptr: Void pointer to the 16-bit aligned source address
- * @dest_ptr: Pointer to the 32-bit aligned destination address
- * @length: Number bytes to write from source to destination
- *
- * This function writes data from a 16-bit aligned buffer to a 32-bit aligned
- * address in the EmacLite device.
- */
-static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr,
- unsigned length)
-{
- u32 align_buffer;
- u32 *to_u32_ptr;
- u16 *from_u16_ptr, *to_u16_ptr;
-
- to_u32_ptr = dest_ptr;
- from_u16_ptr = src_ptr;
- align_buffer = 0;
-
- for (; length > 3; length -= 4) {
- to_u16_ptr = (u16 *)&align_buffer;
- *to_u16_ptr++ = *from_u16_ptr++;
- *to_u16_ptr++ = *from_u16_ptr++;
-
- /* Output a word */
- *to_u32_ptr++ = align_buffer;
- }
- if (length) {
- u8 *from_u8_ptr, *to_u8_ptr;
-
- /* Set up to output the remaining data */
- align_buffer = 0;
- to_u8_ptr = (u8 *) &align_buffer;
- from_u8_ptr = (u8 *) from_u16_ptr;
-
- /* Output the remaining data */
- for (; length > 0; length--)
- *to_u8_ptr++ = *from_u8_ptr++;
-
- *to_u32_ptr = align_buffer;
- }
-}
-
-/**
- * xemaclite_aligned_read - Read from 32-bit aligned to 16-bit aligned buffer
- * @src_ptr: Pointer to the 32-bit aligned source address
- * @dest_ptr: Pointer to the 16-bit aligned destination address
- * @length: Number bytes to read from source to destination
- *
- * This function reads data from a 32-bit aligned address in the EmacLite device
- * to a 16-bit aligned buffer.
- */
-static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
- unsigned length)
-{
- u16 *to_u16_ptr, *from_u16_ptr;
- u32 *from_u32_ptr;
- u32 align_buffer;
-
- from_u32_ptr = src_ptr;
- to_u16_ptr = (u16 *) dest_ptr;
-
- for (; length > 3; length -= 4) {
- /* Copy each word into the temporary buffer */
- align_buffer = *from_u32_ptr++;
- from_u16_ptr = (u16 *)&align_buffer;
-
- /* Read data from source */
- *to_u16_ptr++ = *from_u16_ptr++;
- *to_u16_ptr++ = *from_u16_ptr++;
- }
-
- if (length) {
- u8 *to_u8_ptr, *from_u8_ptr;
-
- /* Set up to read the remaining data */
- to_u8_ptr = (u8 *) to_u16_ptr;
- align_buffer = *from_u32_ptr++;
- from_u8_ptr = (u8 *) &align_buffer;
-
- /* Read the remaining data */
- for (; length > 0; length--)
- *to_u8_ptr = *from_u8_ptr;
- }
-}
-
-/**
- * xemaclite_send_data - Send an Ethernet frame
- * @drvdata: Pointer to the Emaclite device private data
- * @data: Pointer to the data to be sent
- * @byte_count: Total frame size, including header
- *
- * This function checks if the Tx buffer of the Emaclite device is free to send
- * data. If so, it fills the Tx buffer with data for transmission. Otherwise, it
- * returns an error.
- *
- * Return: 0 upon success or -1 if the buffer(s) are full.
- *
- * Note: The maximum Tx packet size can not be more than Ethernet header
- * (14 Bytes) + Maximum MTU (1500 bytes). This is excluding FCS.
- */
-static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
- unsigned int byte_count)
-{
- u32 reg_data;
- void __iomem *addr;
-
- /* Determine the expected Tx buffer address */
- addr = drvdata->base_addr + drvdata->next_tx_buf_to_use;
-
- /* If the length is too large, truncate it */
- if (byte_count > ETH_FRAME_LEN)
- byte_count = ETH_FRAME_LEN;
-
- /* Check if the expected buffer is available */
- reg_data = in_be32(addr + XEL_TSR_OFFSET);
- if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
- XEL_TSR_XMIT_ACTIVE_MASK)) == 0) {
-
- /* Switch to next buffer if configured */
- if (drvdata->tx_ping_pong != 0)
- drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET;
- } else if (drvdata->tx_ping_pong != 0) {
- /* If the expected buffer is full, try the other buffer,
- * if it is configured in HW */
-
- addr = (void __iomem __force *)((u32 __force)addr ^
- XEL_BUFFER_OFFSET);
- reg_data = in_be32(addr + XEL_TSR_OFFSET);
-
- if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
- XEL_TSR_XMIT_ACTIVE_MASK)) != 0)
- return -1; /* Buffers were full, return failure */
- } else
- return -1; /* Buffer was full, return failure */
-
- /* Write the frame to the buffer */
- xemaclite_aligned_write(data, (u32 __force *) addr, byte_count);
-
- out_be32(addr + XEL_TPLR_OFFSET, (byte_count & XEL_TPLR_LENGTH_MASK));
-
- /* Update the Tx Status Register to indicate that there is a
- * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which
- * is used by the interrupt handler to check whether a frame
- * has been transmitted */
- reg_data = in_be32(addr + XEL_TSR_OFFSET);
- reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK);
- out_be32(addr + XEL_TSR_OFFSET, reg_data);
-
- return 0;
-}
-
-/**
- * xemaclite_recv_data - Receive a frame
- * @drvdata: Pointer to the Emaclite device private data
- * @data: Address where the data is to be received
- *
- * This function is intended to be called from the interrupt context or
- * with a wrapper which waits for the receive frame to be available.
- *
- * Return: Total number of bytes received
- */
-static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
-{
- void __iomem *addr;
- u16 length, proto_type;
- u32 reg_data;
-
- /* Determine the expected buffer address */
- addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use);
-
- /* Verify which buffer has valid data */
- reg_data = in_be32(addr + XEL_RSR_OFFSET);
-
- if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
- if (drvdata->rx_ping_pong != 0)
- drvdata->next_rx_buf_to_use ^= XEL_BUFFER_OFFSET;
- } else {
- /* The instance is out of sync, try other buffer if other
- * buffer is configured, return 0 otherwise. If the instance is
- * out of sync, do not update the 'next_rx_buf_to_use' since it
- * will correct on subsequent calls */
- if (drvdata->rx_ping_pong != 0)
- addr = (void __iomem __force *)((u32 __force)addr ^
- XEL_BUFFER_OFFSET);
- else
- return 0; /* No data was available */
-
- /* Verify that buffer has valid data */
- reg_data = in_be32(addr + XEL_RSR_OFFSET);
- if ((reg_data & XEL_RSR_RECV_DONE_MASK) !=
- XEL_RSR_RECV_DONE_MASK)
- return 0; /* No data was available */
- }
-
- /* Get the protocol type of the ethernet frame that arrived */
- proto_type = ((ntohl(in_be32(addr + XEL_HEADER_OFFSET +
- XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) &
- XEL_RPLR_LENGTH_MASK);
-
- /* Check if received ethernet frame is a raw ethernet frame
- * or an IP packet or an ARP packet */
- if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
-
- if (proto_type == ETH_P_IP) {
- length = ((ntohl(in_be32(addr +
- XEL_HEADER_IP_LENGTH_OFFSET +
- XEL_RXBUFF_OFFSET)) >>
- XEL_HEADER_SHIFT) &
- XEL_RPLR_LENGTH_MASK);
- length += ETH_HLEN + ETH_FCS_LEN;
-
- } else if (proto_type == ETH_P_ARP)
- length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN;
- else
- /* Field contains type other than IP or ARP, use max
- * frame size and let user parse it */
- length = ETH_FRAME_LEN + ETH_FCS_LEN;
- } else
- /* Use the length in the frame, plus the header and trailer */
- length = proto_type + ETH_HLEN + ETH_FCS_LEN;
-
- /* Read from the EmacLite device */
- xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET),
- data, length);
-
- /* Acknowledge the frame */
- reg_data = in_be32(addr + XEL_RSR_OFFSET);
- reg_data &= ~XEL_RSR_RECV_DONE_MASK;
- out_be32(addr + XEL_RSR_OFFSET, reg_data);
-
- return length;
-}
-
-/**
- * xemaclite_update_address - Update the MAC address in the device
- * @drvdata: Pointer to the Emaclite device private data
- * @address_ptr:Pointer to the MAC address (MAC address is a 48-bit value)
- *
- * Tx must be idle and Rx should be idle for deterministic results.
- * It is recommended that this function should be called after the
- * initialization and before transmission of any packets from the device.
- * The MAC address can be programmed using any of the two transmit
- * buffers (if configured).
- */
-static void xemaclite_update_address(struct net_local *drvdata,
- u8 *address_ptr)
-{
- void __iomem *addr;
- u32 reg_data;
-
- /* Determine the expected Tx buffer address */
- addr = drvdata->base_addr + drvdata->next_tx_buf_to_use;
-
- xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN);
-
- out_be32(addr + XEL_TPLR_OFFSET, ETH_ALEN);
-
- /* Update the MAC address in the EmacLite */
- reg_data = in_be32(addr + XEL_TSR_OFFSET);
- out_be32(addr + XEL_TSR_OFFSET, reg_data | XEL_TSR_PROG_MAC_ADDR);
-
- /* Wait for EmacLite to finish with the MAC address update */
- while ((in_be32(addr + XEL_TSR_OFFSET) &
- XEL_TSR_PROG_MAC_ADDR) != 0)
- ;
-}
-
-/**
- * xemaclite_set_mac_address - Set the MAC address for this device
- * @dev: Pointer to the network device instance
- * @addr: Void pointer to the sockaddr structure
- *
- * This function copies the HW address from the sockaddr strucutre to the
- * net_device structure and updates the address in HW.
- *
- * Return: Error if the net device is busy or 0 if the addr is set
- * successfully
- */
-static int xemaclite_set_mac_address(struct net_device *dev, void *address)
-{
- struct net_local *lp = netdev_priv(dev);
- struct sockaddr *addr = address;
-
- if (netif_running(dev))
- return -EBUSY;
-
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
- xemaclite_update_address(lp, dev->dev_addr);
- return 0;
-}
-
-/**
- * xemaclite_tx_timeout - Callback for Tx Timeout
- * @dev: Pointer to the network device
- *
- * This function is called when Tx time out occurs for Emaclite device.
- */
-static void xemaclite_tx_timeout(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- unsigned long flags;
-
- dev_err(&lp->ndev->dev, "Exceeded transmit timeout of %lu ms\n",
- TX_TIMEOUT * 1000UL / HZ);
-
- dev->stats.tx_errors++;
-
- /* Reset the device */
- spin_lock_irqsave(&lp->reset_lock, flags);
-
- /* Shouldn't really be necessary, but shouldn't hurt */
- netif_stop_queue(dev);
-
- xemaclite_disable_interrupts(lp);
- xemaclite_enable_interrupts(lp);
-
- if (lp->deferred_skb) {
- dev_kfree_skb(lp->deferred_skb);
- lp->deferred_skb = NULL;
- dev->stats.tx_errors++;
- }
-
- /* To exclude tx timeout */
- dev->trans_start = jiffies; /* prevent tx timeout */
-
- /* We're all ready to go. Start the queue */
- netif_wake_queue(dev);
- spin_unlock_irqrestore(&lp->reset_lock, flags);
-}
-
-/**********************/
-/* Interrupt Handlers */
-/**********************/
-
-/**
- * xemaclite_tx_handler - Interrupt handler for frames sent
- * @dev: Pointer to the network device
- *
- * This function updates the number of packets transmitted and handles the
- * deferred skb, if there is one.
- */
-static void xemaclite_tx_handler(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-
- dev->stats.tx_packets++;
- if (lp->deferred_skb) {
- if (xemaclite_send_data(lp,
- (u8 *) lp->deferred_skb->data,
- lp->deferred_skb->len) != 0)
- return;
- else {
- dev->stats.tx_bytes += lp->deferred_skb->len;
- dev_kfree_skb_irq(lp->deferred_skb);
- lp->deferred_skb = NULL;
- dev->trans_start = jiffies; /* prevent tx timeout */
- netif_wake_queue(dev);
- }
- }
-}
-
-/**
- * xemaclite_rx_handler- Interrupt handler for frames received
- * @dev: Pointer to the network device
- *
- * This function allocates memory for a socket buffer, fills it with data
- * received and hands it over to the TCP/IP stack.
- */
-static void xemaclite_rx_handler(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- struct sk_buff *skb;
- unsigned int align;
- u32 len;
-
- len = ETH_FRAME_LEN + ETH_FCS_LEN;
- skb = dev_alloc_skb(len + ALIGNMENT);
- if (!skb) {
- /* Couldn't get memory. */
- dev->stats.rx_dropped++;
- dev_err(&lp->ndev->dev, "Could not allocate receive buffer\n");
- return;
- }
-
- /*
- * A new skb should have the data halfword aligned, but this code is
- * here just in case that isn't true. Calculate how many
- * bytes we should reserve to get the data to start on a word
- * boundary */
- align = BUFFER_ALIGN(skb->data);
- if (align)
- skb_reserve(skb, align);
-
- skb_reserve(skb, 2);
-
- len = xemaclite_recv_data(lp, (u8 *) skb->data);
-
- if (!len) {
- dev->stats.rx_errors++;
- dev_kfree_skb_irq(skb);
- return;
- }
-
- skb_put(skb, len); /* Tell the skb how much data we got */
-
- skb->protocol = eth_type_trans(skb, dev);
- skb_checksum_none_assert(skb);
-
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += len;
-
- if (!skb_defer_rx_timestamp(skb))
- netif_rx(skb); /* Send the packet upstream */
-}
-
-/**
- * xemaclite_interrupt - Interrupt handler for this driver
- * @irq: Irq of the Emaclite device
- * @dev_id: Void pointer to the network device instance used as callback
- * reference
- *
- * This function handles the Tx and Rx interrupts of the EmacLite device.
- */
-static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
-{
- bool tx_complete = 0;
- struct net_device *dev = dev_id;
- struct net_local *lp = netdev_priv(dev);
- void __iomem *base_addr = lp->base_addr;
- u32 tx_status;
-
- /* Check if there is Rx Data available */
- if ((in_be32(base_addr + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK) ||
- (in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET)
- & XEL_RSR_RECV_DONE_MASK))
-
- xemaclite_rx_handler(dev);
-
- /* Check if the Transmission for the first buffer is completed */
- tx_status = in_be32(base_addr + XEL_TSR_OFFSET);
- if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
- (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
-
- tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
- out_be32(base_addr + XEL_TSR_OFFSET, tx_status);
-
- tx_complete = 1;
- }
-
- /* Check if the Transmission for the second buffer is completed */
- tx_status = in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
- if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
- (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {
-
- tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
- out_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET,
- tx_status);
-
- tx_complete = 1;
- }
-
- /* If there was a Tx interrupt, call the Tx Handler */
- if (tx_complete != 0)
- xemaclite_tx_handler(dev);
-
- return IRQ_HANDLED;
-}
-
-/**********************/
-/* MDIO Bus functions */
-/**********************/
-
-/**
- * xemaclite_mdio_wait - Wait for the MDIO to be ready to use
- * @lp: Pointer to the Emaclite device private data
- *
- * This function waits till the device is ready to accept a new MDIO
- * request.
- *
- * Return: 0 for success or ETIMEDOUT for a timeout
- */
-
-static int xemaclite_mdio_wait(struct net_local *lp)
-{
- long end = jiffies + 2;
-
- /* wait for the MDIO interface to not be busy or timeout
- after some time.
- */
- while (in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET) &
- XEL_MDIOCTRL_MDIOSTS_MASK) {
- if (end - jiffies <= 0) {
- WARN_ON(1);
- return -ETIMEDOUT;
- }
- msleep(1);
- }
- return 0;
-}
-
-/**
- * xemaclite_mdio_read - Read from a given MII management register
- * @bus: the mii_bus struct
- * @phy_id: the phy address
- * @reg: register number to read from
- *
- * This function waits till the device is ready to accept a new MDIO
- * request and then writes the phy address to the MDIO Address register
- * and reads data from MDIO Read Data register, when its available.
- *
- * Return: Value read from the MII management register
- */
-static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
-{
- struct net_local *lp = bus->priv;
- u32 ctrl_reg;
- u32 rc;
-
- if (xemaclite_mdio_wait(lp))
- return -ETIMEDOUT;
-
- /* Write the PHY address, register number and set the OP bit in the
- * MDIO Address register. Set the Status bit in the MDIO Control
- * register to start a MDIO read transaction.
- */
- ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
- out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
- XEL_MDIOADDR_OP_MASK |
- ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
- out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
- ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
-
- if (xemaclite_mdio_wait(lp))
- return -ETIMEDOUT;
-
- rc = in_be32(lp->base_addr + XEL_MDIORD_OFFSET);
-
- dev_dbg(&lp->ndev->dev,
- "xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n",
- phy_id, reg, rc);
-
- return rc;
-}
-
-/**
- * xemaclite_mdio_write - Write to a given MII management register
- * @bus: the mii_bus struct
- * @phy_id: the phy address
- * @reg: register number to write to
- * @val: value to write to the register number specified by reg
- *
- * This function waits till the device is ready to accept a new MDIO
- * request and then writes the val to the MDIO Write Data register.
- */
-static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
- u16 val)
-{
- struct net_local *lp = bus->priv;
- u32 ctrl_reg;
-
- dev_dbg(&lp->ndev->dev,
- "xemaclite_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
- phy_id, reg, val);
-
- if (xemaclite_mdio_wait(lp))
- return -ETIMEDOUT;
-
- /* Write the PHY address, register number and clear the OP bit in the
- * MDIO Address register and then write the value into the MDIO Write
- * Data register. Finally, set the Status bit in the MDIO Control
- * register to start a MDIO write transaction.
- */
- ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
- out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
- ~XEL_MDIOADDR_OP_MASK &
- ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
- out_be32(lp->base_addr + XEL_MDIOWR_OFFSET, val);
- out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
- ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
-
- return 0;
-}
-
-/**
- * xemaclite_mdio_reset - Reset the mdio bus.
- * @bus: Pointer to the MII bus
- *
- * This function is required(?) as per Documentation/networking/phy.txt.
- * There is no reset in this device; this function always returns 0.
- */
-static int xemaclite_mdio_reset(struct mii_bus *bus)
-{
- return 0;
-}
-
-/**
- * xemaclite_mdio_setup - Register mii_bus for the Emaclite device
- * @lp: Pointer to the Emaclite device private data
- * @ofdev: Pointer to OF device structure
- *
- * This function enables MDIO bus in the Emaclite device and registers a
- * mii_bus.
- *
- * Return: 0 upon success or a negative error upon failure
- */
-static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
-{
- struct mii_bus *bus;
- int rc;
- struct resource res;
- struct device_node *np = of_get_parent(lp->phy_node);
-
- /* Don't register the MDIO bus if the phy_node or its parent node
- * can't be found.
- */
- if (!np)
- return -ENODEV;
-
- /* Enable the MDIO bus by asserting the enable bit in MDIO Control
- * register.
- */
- out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
- XEL_MDIOCTRL_MDIOEN_MASK);
-
- bus = mdiobus_alloc();
- if (!bus)
- return -ENOMEM;
-
- of_address_to_resource(np, 0, &res);
- snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
- (unsigned long long)res.start);
- bus->priv = lp;
- bus->name = "Xilinx Emaclite MDIO";
- bus->read = xemaclite_mdio_read;
- bus->write = xemaclite_mdio_write;
- bus->reset = xemaclite_mdio_reset;
- bus->parent = dev;
- bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
-
- lp->mii_bus = bus;
-
- rc = of_mdiobus_register(bus, np);
- if (rc)
- goto err_register;
-
- return 0;
-
-err_register:
- mdiobus_free(bus);
- return rc;
-}
-
-/**
- * xemaclite_adjust_link - Link state callback for the Emaclite device
- * @ndev: pointer to net_device struct
- *
- * There's nothing in the Emaclite device to be configured when the link
- * state changes. We just print the status.
- */
-void xemaclite_adjust_link(struct net_device *ndev)
-{
- struct net_local *lp = netdev_priv(ndev);
- struct phy_device *phy = lp->phy_dev;
- int link_state;
-
- /* hash together the state values to decide if something has changed */
- link_state = phy->speed | (phy->duplex << 1) | phy->link;
-
- if (lp->last_link != link_state) {
- lp->last_link = link_state;
- phy_print_status(phy);
- }
-}
-
-/**
- * xemaclite_open - Open the network device
- * @dev: Pointer to the network device
- *
- * This function sets the MAC address, requests an IRQ and enables interrupts
- * for the Emaclite device and starts the Tx queue.
- * It also connects to the phy device, if MDIO is included in Emaclite device.
- */
-static int xemaclite_open(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- int retval;
-
- /* Just to be safe, stop the device first */
- xemaclite_disable_interrupts(lp);
-
- if (lp->phy_node) {
- u32 bmcr;
-
- lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
- xemaclite_adjust_link, 0,
- PHY_INTERFACE_MODE_MII);
- if (!lp->phy_dev) {
- dev_err(&lp->ndev->dev, "of_phy_connect() failed\n");
- return -ENODEV;
- }
-
- /* EmacLite doesn't support giga-bit speeds */
- lp->phy_dev->supported &= (PHY_BASIC_FEATURES);
- lp->phy_dev->advertising = lp->phy_dev->supported;
-
- /* Don't advertise 1000BASE-T Full/Half duplex speeds */
- phy_write(lp->phy_dev, MII_CTRL1000, 0);
-
- /* Advertise only 10 and 100mbps full/half duplex speeds */
- phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL);
-
- /* Restart auto negotiation */
- bmcr = phy_read(lp->phy_dev, MII_BMCR);
- bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(lp->phy_dev, MII_BMCR, bmcr);
-
- phy_start(lp->phy_dev);
- }
-
- /* Set the MAC address each time opened */
- xemaclite_update_address(lp, dev->dev_addr);
-
- /* Grab the IRQ */
- retval = request_irq(dev->irq, xemaclite_interrupt, 0, dev->name, dev);
- if (retval) {
- dev_err(&lp->ndev->dev, "Could not allocate interrupt %d\n",
- dev->irq);
- if (lp->phy_dev)
- phy_disconnect(lp->phy_dev);
- lp->phy_dev = NULL;
-
- return retval;
- }
-
- /* Enable Interrupts */
- xemaclite_enable_interrupts(lp);
-
- /* We're ready to go */
- netif_start_queue(dev);
-
- return 0;
-}
-
-/**
- * xemaclite_close - Close the network device
- * @dev: Pointer to the network device
- *
- * This function stops the Tx queue, disables interrupts and frees the IRQ for
- * the Emaclite device.
- * It also disconnects the phy device associated with the Emaclite device.
- */
-static int xemaclite_close(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
-
- netif_stop_queue(dev);
- xemaclite_disable_interrupts(lp);
- free_irq(dev->irq, dev);
-
- if (lp->phy_dev)
- phy_disconnect(lp->phy_dev);
- lp->phy_dev = NULL;
-
- return 0;
-}
-
-/**
- * xemaclite_send - Transmit a frame
- * @orig_skb: Pointer to the socket buffer to be transmitted
- * @dev: Pointer to the network device
- *
- * This function checks if the Tx buffer of the Emaclite device is free to send
- * data. If so, it fills the Tx buffer with data from socket buffer data,
- * updates the stats and frees the socket buffer. The Tx completion is signaled
- * by an interrupt. If the Tx buffer isn't free, then the socket buffer is
- * deferred and the Tx queue is stopped so that the deferred socket buffer can
- * be transmitted when the Emaclite device is free to transmit data.
- *
- * Return: 0, always.
- */
-static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- struct sk_buff *new_skb;
- unsigned int len;
- unsigned long flags;
-
- len = orig_skb->len;
-
- new_skb = orig_skb;
-
- spin_lock_irqsave(&lp->reset_lock, flags);
- if (xemaclite_send_data(lp, (u8 *) new_skb->data, len) != 0) {
- /* If the Emaclite Tx buffer is busy, stop the Tx queue and
- * defer the skb for transmission during the ISR, after the
- * current transmission is complete */
- netif_stop_queue(dev);
- lp->deferred_skb = new_skb;
- /* Take the time stamp now, since we can't do this in an ISR. */
- skb_tx_timestamp(new_skb);
- spin_unlock_irqrestore(&lp->reset_lock, flags);
- return 0;
- }
- spin_unlock_irqrestore(&lp->reset_lock, flags);
-
- skb_tx_timestamp(new_skb);
-
- dev->stats.tx_bytes += len;
- dev_kfree_skb(new_skb);
-
- return 0;
-}
-
-/**
- * xemaclite_remove_ndev - Free the network device
- * @ndev: Pointer to the network device to be freed
- *
- * This function un maps the IO region of the Emaclite device and frees the net
- * device.
- */
-static void xemaclite_remove_ndev(struct net_device *ndev)
-{
- if (ndev) {
- struct net_local *lp = netdev_priv(ndev);
-
- if (lp->base_addr)
- iounmap((void __iomem __force *) (lp->base_addr));
- free_netdev(ndev);
- }
-}
-
-/**
- * get_bool - Get a parameter from the OF device
- * @ofdev: Pointer to OF device structure
- * @s: Property to be retrieved
- *
- * This function looks for a property in the device node and returns the value
- * of the property if its found or 0 if the property is not found.
- *
- * Return: Value of the parameter if the parameter is found, or 0 otherwise
- */
-static bool get_bool(struct platform_device *ofdev, const char *s)
-{
- u32 *p = (u32 *)of_get_property(ofdev->dev.of_node, s, NULL);
-
- if (p) {
- return (bool)*p;
- } else {
- dev_warn(&ofdev->dev, "Parameter %s not found,"
- "defaulting to false\n", s);
- return 0;
- }
-}
-
-static struct net_device_ops xemaclite_netdev_ops;
-
-/**
- * xemaclite_of_probe - Probe method for the Emaclite device.
- * @ofdev: Pointer to OF device structure
- * @match: Pointer to the structure used for matching a device
- *
- * This function probes for the Emaclite device in the device tree.
- * It initializes the driver data structure and the hardware, sets the MAC
- * address and registers the network device.
- * It also registers a mii_bus for the Emaclite device, if MDIO is included
- * in the device.
- *
- * Return: 0, if the driver is bound to the Emaclite device, or
- * a negative error if there is failure.
- */
-static int __devinit xemaclite_of_probe(struct platform_device *ofdev)
-{
- struct resource r_irq; /* Interrupt resources */
- struct resource r_mem; /* IO mem resources */
- struct net_device *ndev = NULL;
- struct net_local *lp = NULL;
- struct device *dev = &ofdev->dev;
- const void *mac_address;
-
- int rc = 0;
-
- dev_info(dev, "Device Tree Probing\n");
-
- /* Get iospace for the device */
- rc = of_address_to_resource(ofdev->dev.of_node, 0, &r_mem);
- if (rc) {
- dev_err(dev, "invalid address\n");
- return rc;
- }
-
- /* Get IRQ for the device */
- rc = of_irq_to_resource(ofdev->dev.of_node, 0, &r_irq);
- if (rc == NO_IRQ) {
- dev_err(dev, "no IRQ found\n");
- return rc;
- }
-
- /* Create an ethernet device instance */
- ndev = alloc_etherdev(sizeof(struct net_local));
- if (!ndev) {
- dev_err(dev, "Could not allocate network device\n");
- return -ENOMEM;
- }
-
- dev_set_drvdata(dev, ndev);
- SET_NETDEV_DEV(ndev, &ofdev->dev);
-
- ndev->irq = r_irq.start;
- ndev->mem_start = r_mem.start;
- ndev->mem_end = r_mem.end;
-
- lp = netdev_priv(ndev);
- lp->ndev = ndev;
-
- if (!request_mem_region(ndev->mem_start,
- ndev->mem_end - ndev->mem_start + 1,
- DRIVER_NAME)) {
- dev_err(dev, "Couldn't lock memory region at %p\n",
- (void *)ndev->mem_start);
- rc = -EBUSY;
- goto error2;
- }
-
- /* Get the virtual base address for the device */
- lp->base_addr = ioremap(r_mem.start, resource_size(&r_mem));
- if (NULL == lp->base_addr) {
- dev_err(dev, "EmacLite: Could not allocate iomem\n");
- rc = -EIO;
- goto error1;
- }
-
- spin_lock_init(&lp->reset_lock);
- lp->next_tx_buf_to_use = 0x0;
- lp->next_rx_buf_to_use = 0x0;
- lp->tx_ping_pong = get_bool(ofdev, "xlnx,tx-ping-pong");
- lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong");
- mac_address = of_get_mac_address(ofdev->dev.of_node);
-
- if (mac_address)
- /* Set the MAC address. */
- memcpy(ndev->dev_addr, mac_address, 6);
- else
- dev_warn(dev, "No MAC address found\n");
-
- /* Clear the Tx CSR's in case this is a restart */
- out_be32(lp->base_addr + XEL_TSR_OFFSET, 0);
- out_be32(lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, 0);
-
- /* Set the MAC address in the EmacLite device */
- xemaclite_update_address(lp, ndev->dev_addr);
-
- lp->phy_node = of_parse_phandle(ofdev->dev.of_node, "phy-handle", 0);
- rc = xemaclite_mdio_setup(lp, &ofdev->dev);
- if (rc)
- dev_warn(&ofdev->dev, "error registering MDIO bus\n");
-
- dev_info(dev, "MAC address is now %pM\n", ndev->dev_addr);
-
- ndev->netdev_ops = &xemaclite_netdev_ops;
- ndev->flags &= ~IFF_MULTICAST;
- ndev->watchdog_timeo = TX_TIMEOUT;
-
- /* Finally, register the device */
- rc = register_netdev(ndev);
- if (rc) {
- dev_err(dev,
- "Cannot register network device, aborting\n");
- goto error1;
- }
-
- dev_info(dev,
- "Xilinx EmacLite at 0x%08X mapped to 0x%08X, irq=%d\n",
- (unsigned int __force)ndev->mem_start,
- (unsigned int __force)lp->base_addr, ndev->irq);
- return 0;
-
-error1:
- release_mem_region(ndev->mem_start, resource_size(&r_mem));
-
-error2:
- xemaclite_remove_ndev(ndev);
- return rc;
-}
-
-/**
- * xemaclite_of_remove - Unbind the driver from the Emaclite device.
- * @of_dev: Pointer to OF device structure
- *
- * This function is called if a device is physically removed from the system or
- * if the driver module is being unloaded. It frees any resources allocated to
- * the device.
- *
- * Return: 0, always.
- */
-static int __devexit xemaclite_of_remove(struct platform_device *of_dev)
-{
- struct device *dev = &of_dev->dev;
- struct net_device *ndev = dev_get_drvdata(dev);
-
- struct net_local *lp = netdev_priv(ndev);
-
- /* Un-register the mii_bus, if configured */
- if (lp->has_mdio) {
- mdiobus_unregister(lp->mii_bus);
- kfree(lp->mii_bus->irq);
- mdiobus_free(lp->mii_bus);
- lp->mii_bus = NULL;
- }
-
- unregister_netdev(ndev);
-
- if (lp->phy_node)
- of_node_put(lp->phy_node);
- lp->phy_node = NULL;
-
- release_mem_region(ndev->mem_start, ndev->mem_end-ndev->mem_start + 1);
-
- xemaclite_remove_ndev(ndev);
- dev_set_drvdata(dev, NULL);
-
- return 0;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void
-xemaclite_poll_controller(struct net_device *ndev)
-{
- disable_irq(ndev->irq);
- xemaclite_interrupt(ndev->irq, ndev);
- enable_irq(ndev->irq);
-}
-#endif
-
-static struct net_device_ops xemaclite_netdev_ops = {
- .ndo_open = xemaclite_open,
- .ndo_stop = xemaclite_close,
- .ndo_start_xmit = xemaclite_send,
- .ndo_set_mac_address = xemaclite_set_mac_address,
- .ndo_tx_timeout = xemaclite_tx_timeout,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = xemaclite_poll_controller,
-#endif
-};
-
-/* Match table for OF platform binding */
-static struct of_device_id xemaclite_of_match[] __devinitdata = {
- { .compatible = "xlnx,opb-ethernetlite-1.01.a", },
- { .compatible = "xlnx,opb-ethernetlite-1.01.b", },
- { .compatible = "xlnx,xps-ethernetlite-1.00.a", },
- { .compatible = "xlnx,xps-ethernetlite-2.00.a", },
- { .compatible = "xlnx,xps-ethernetlite-2.01.a", },
- { .compatible = "xlnx,xps-ethernetlite-3.00.a", },
- { /* end of list */ },
-};
-MODULE_DEVICE_TABLE(of, xemaclite_of_match);
-
-static struct platform_driver xemaclite_of_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- .of_match_table = xemaclite_of_match,
- },
- .probe = xemaclite_of_probe,
- .remove = __devexit_p(xemaclite_of_remove),
-};
-
-/**
- * xgpiopss_init - Initial driver registration call
- *
- * Return: 0 upon success, or a negative error upon failure.
- */
-static int __init xemaclite_init(void)
-{
- /* No kernel boot options used, we just need to register the driver */
- return platform_driver_register(&xemaclite_of_driver);
-}
-
-/**
- * xemaclite_cleanup - Driver un-registration call
- */
-static void __exit xemaclite_cleanup(void)
-{
- platform_driver_unregister(&xemaclite_of_driver);
-}
-
-module_init(xemaclite_init);
-module_exit(xemaclite_cleanup);
-
-MODULE_AUTHOR("Xilinx, Inc.");
-MODULE_DESCRIPTION("Xilinx Ethernet MAC Lite driver");
-MODULE_LICENSE("GPL");
projects / deliverable / linux.git / commitdiff
