CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X),
CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X),
CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X),
- CLK(NULL, "gpmc_ck", &dummy_ck, CK_443X),
+ CLK("omap-gpmc", "fck", &dummy_ck, CK_443X),
CLK("omap_i2c.1", "ick", &dummy_ck, CK_443X),
CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X),
CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X),
if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable)
return -EINVAL;
+ spin_lock_irqsave(&clkdm->lock, flags);
+
/*
* For arch's with no autodeps, clkcm_clk_enable
* should be called for every clock instance or hwmod that is
* enabled, so the clkdm can be force woken up.
*/
- if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps)
+ if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) {
+ spin_unlock_irqrestore(&clkdm->lock, flags);
return 0;
+ }
- spin_lock_irqsave(&clkdm->lock, flags);
arch_clkdm->clkdm_clk_enable(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
return -EINVAL;
+ spin_lock_irqsave(&clkdm->lock, flags);
+
if (atomic_read(&clkdm->usecount) == 0) {
+ spin_unlock_irqrestore(&clkdm->lock, flags);
WARN_ON(1); /* underflow */
return -ERANGE;
}
- if (atomic_dec_return(&clkdm->usecount) > 0)
+ if (atomic_dec_return(&clkdm->usecount) > 0) {
+ spin_unlock_irqrestore(&clkdm->lock, flags);
return 0;
+ }
- spin_lock_irqsave(&clkdm->lock, flags);
arch_clkdm->clkdm_clk_disable(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
oh = omap_hwmod_lookup("dmic");
if (!oh) {
- printk(KERN_ERR "Could not look up mcpdm hw_mod\n");
+ pr_err("Could not look up dmic hw_mod\n");
return;
}
}
-static void __devinit gpmc_mem_init(void)
+static int __devinit gpmc_mem_init(void)
{
- int cs;
+ int cs, rc;
unsigned long boot_rom_space = 0;
/* never allocate the first page, to facilitate bug detection;
if (!gpmc_cs_mem_enabled(cs))
continue;
gpmc_cs_get_memconf(cs, &base, &size);
- if (gpmc_cs_insert_mem(cs, base, size) < 0)
- BUG();
+ rc = gpmc_cs_insert_mem(cs, base, size);
+ if (IS_ERR_VALUE(rc)) {
+ while (--cs >= 0)
+ if (gpmc_cs_mem_enabled(cs))
+ gpmc_cs_delete_mem(cs);
+ return rc;
+ }
}
+
+ return 0;
}
static __devinit int gpmc_probe(struct platform_device *pdev)
{
+ int rc;
u32 l;
struct resource *res;
dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
GPMC_REVISION_MINOR(l));
- gpmc_mem_init();
+ rc = gpmc_mem_init();
+ if (IS_ERR_VALUE(rc)) {
+ clk_disable_unprepare(gpmc_l3_clk);
+ clk_put(gpmc_l3_clk);
+ dev_err(gpmc_dev, "failed to reserve memory\n");
+ return rc;
+ }
if (IS_ERR_VALUE(gpmc_setup_irq()))
dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
#ifdef CONFIG_ARCH_OMAP4
#ifdef CONFIG_LOCAL_TIMERS
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
- OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START);
+ OMAP44XX_LOCAL_TWD_BASE, 29);
#endif
static void __init omap4_timer_init(void)
#include <linux/smc91x.h>
#include <mach/hardware.h>
+#include "../mach-omap2/debug-devices.h"
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2.