regulator: da9211: support device tree
authorJames Ban <james.ban.opensource@diasemi.com>
Wed, 27 Aug 2014 02:47:07 +0000 (11:47 +0900)
committerMark Brown <broonie@linaro.org>
Wed, 27 Aug 2014 09:27:56 +0000 (10:27 +0100)
This is a patch for supporting device tree of DA9211/DA9213.

Signed-off-by: James Ban <james.ban.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Documentation/devicetree/bindings/regulator/da9211.txt [new file with mode: 0644]
drivers/regulator/da9211-regulator.c
include/linux/regulator/da9211.h

diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
new file mode 100644 (file)
index 0000000..240019a
--- /dev/null
@@ -0,0 +1,63 @@
+* Dialog Semiconductor DA9211/DA9213 Voltage Regulator
+
+Required properties:
+- compatible: "dlg,da9211" or "dlg,da9213".
+- reg: I2C slave address, usually 0x68.
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  BUCKA and BUCKB.
+
+Optional properties:
+- Any optional property defined in regulator.txt
+
+Example 1) DA9211
+
+       pmic: da9211@68 {
+               compatible = "dlg,da9211";
+               reg = <0x68>;
+               interrupts = <3 27>;
+
+               regulators {
+                       BUCKA {
+                               regulator-name = "VBUCKA";
+                               regulator-min-microvolt = < 300000>;
+                               regulator-max-microvolt = <1570000>;
+                               regulator-min-microamp  = <2000000>;
+                               regulator-max-microamp  = <5000000>;
+                       };
+                       BUCKB {
+                               regulator-name = "VBUCKB";
+                               regulator-min-microvolt = < 300000>;
+                               regulator-max-microvolt = <1570000>;
+                               regulator-min-microamp  = <2000000>;
+                               regulator-max-microamp  = <5000000>;
+                       };
+               };
+       };
+
+Example 2) DA92113
+       pmic: da9213@68 {
+               compatible = "dlg,da9213";
+               reg = <0x68>;
+               interrupts = <3 27>;
+
+               regulators {
+                       BUCKA {
+                               regulator-name = "VBUCKA";
+                               regulator-min-microvolt = < 300000>;
+                               regulator-max-microvolt = <1570000>;
+                               regulator-min-microamp  = <3000000>;
+                               regulator-max-microamp  = <6000000>;
+                       };
+                       BUCKB {
+                               regulator-name = "VBUCKB";
+                               regulator-min-microvolt = < 300000>;
+                               regulator-max-microvolt = <1570000>;
+                               regulator-min-microamp  = <3000000>;
+                               regulator-max-microamp  = <6000000>;
+                       };
+               };
+       };
index a26f1d283c576f98bcb31d33805419749c1e798c..5aabbac1b524e257638a20dbe1c430896194ca70 100644 (file)
@@ -24,6 +24,7 @@
 #include <linux/regmap.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/regulator/da9211.h>
 #include "da9211-regulator.h"
 
@@ -236,6 +237,59 @@ static struct regulator_desc da9211_regulators[] = {
        DA9211_BUCK(BUCKB),
 };
 
+#ifdef CONFIG_OF
+static struct of_regulator_match da9211_matches[] = {
+       [DA9211_ID_BUCKA] = { .name = "BUCKA" },
+       [DA9211_ID_BUCKB] = { .name = "BUCKB" },
+       };
+
+static struct da9211_pdata *da9211_parse_regulators_dt(
+               struct device *dev)
+{
+       struct da9211_pdata *pdata;
+       struct device_node *node;
+       int i, num, n;
+
+       node = of_get_child_by_name(dev->of_node, "regulators");
+       if (!node) {
+               dev_err(dev, "regulators node not found\n");
+               return ERR_PTR(-ENODEV);
+       }
+
+       num = of_regulator_match(dev, node, da9211_matches,
+                                ARRAY_SIZE(da9211_matches));
+       of_node_put(node);
+       if (num < 0) {
+               dev_err(dev, "Failed to match regulators\n");
+               return ERR_PTR(-EINVAL);
+       }
+
+       pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+       if (!pdata)
+               return ERR_PTR(-ENOMEM);
+
+       pdata->num_buck = num;
+
+       n = 0;
+       for (i = 0; i < ARRAY_SIZE(da9211_matches); i++) {
+               if (!da9211_matches[i].init_data)
+                       continue;
+
+               pdata->init_data[n] = da9211_matches[i].init_data;
+
+               n++;
+       };
+
+       return pdata;
+}
+#else
+static struct da9211_pdata *da9211_parse_regulators_dt(
+               struct device *dev)
+{
+       return ERR_PTR(-ENODEV);
+}
+#endif
+
 static irqreturn_t da9211_irq_handler(int irq, void *data)
 {
        struct da9211 *chip = data;
@@ -306,7 +360,7 @@ static int da9211_regulator_init(struct da9211 *chip)
        }
 
        for (i = 0; i < chip->num_regulator; i++) {
-               config.init_data = &(chip->pdata->init_data[i]);
+               config.init_data = chip->pdata->init_data[i];
                config.dev = chip->dev;
                config.driver_data = chip;
                config.regmap = chip->regmap;
@@ -332,6 +386,21 @@ static int da9211_regulator_init(struct da9211 *chip)
 
        return 0;
 }
+
+static const struct i2c_device_id da9211_i2c_id[] = {
+       {"da9211", DA9211},
+       {"da9213", DA9213},
+       {},
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id da9211_dt_ids[] = {
+       { .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] },
+       { .compatible = "dlg,da9213", .data = &da9211_i2c_id[1] },
+       {},
+};
+#endif
+
 /*
  * I2C driver interface functions
  */
@@ -377,6 +446,14 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
                return -ENODEV;
        }
 
+       if (!chip->pdata)
+               chip->pdata = da9211_parse_regulators_dt(chip->dev);
+
+       if (IS_ERR(chip->pdata)) {
+               dev_err(chip->dev, "No regulators defined for the platform\n");
+               return PTR_ERR(chip->pdata);
+       }
+
        chip->chip_irq = i2c->irq;
 
        if (chip->chip_irq != 0) {
@@ -401,12 +478,6 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
        return ret;
 }
 
-static const struct i2c_device_id da9211_i2c_id[] = {
-       {"da9211", DA9211},
-       {"da9213", DA9213},
-       {},
-};
-
 MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
 
 static struct i2c_driver da9211_regulator_driver = {
index 658c3c33f4c0512c1d651da0c873c7bab4a24ffe..5479394fefcec75bce9a090093d9d5d6e81e5b5d 100644 (file)
@@ -32,6 +32,6 @@ struct da9211_pdata {
         * 2 : 2 phase 2 buck
         */
        int num_buck;
-       struct regulator_init_data *init_data;
+       struct regulator_init_data *init_data[DA9211_MAX_REGULATORS];
 };
 #endif
This page took 0.029199 seconds and 5 git commands to generate.