staging: comedi: adl_pci9118: clarify the digital I/O register

The same register is used for both the digital inputs and outputs.
Reading the register returns the state of the 4 digtial input channels
and the 4 digital output channels. Writing to the register updates the
digital outputs.

Add some comments to clarify this and use a single define for the register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 4e083159e7cdb6eecc2e7da4195dab84bd512dbb..6fb46cb03594b3d985590b433dac1b94d0282d59 100644 (file)
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -129,9 +129,8 @@
 #define PCI9118_AI_CTRL_TMRTR          (1 << 2)  /* 1=8254 is trigger source */
 #define PCI9118_AI_CTRL_INT            (1 << 1)  /* 1=enable interrupt */
 #define PCI9118_AI_CTRL_DMA            (1 << 0)  /* 1=enable DMA */
+#define PCI9118_DIO_REG                        0x1c
 
-#define PCI9118_DI     0x1c    /* R:   digi input register */
-#define PCI9118_DO     0x1c    /* W:   digi output register */
 #define PCI9118_SOFTTRG        0x20    /* W:   soft trigger for A/D */
 #define PCI9118_GAIN   0x24    /* W:   A/D gain/channel register */
 #define PCI9118_BURST  0x28    /* W:   A/D burst number register */
@@ -565,9 +564,15 @@ static int pci9118_insn_read_ao(struct comedi_device *dev,
 
 static int pci9118_insn_bits_di(struct comedi_device *dev,
                                struct comedi_subdevice *s,
-                               struct comedi_insn *insn, unsigned int *data)
+                               struct comedi_insn *insn,
+                               unsigned int *data)
 {
-       data[1] = inl(dev->iobase + PCI9118_DI) & 0xf;
+       /*
+        * The digital inputs and outputs share the read register.
+        * bits [7:4] are the digital outputs
+        * bits [3:0] are the digital inputs
+        */
+       data[1] = inl(dev->iobase + PCI9118_DIO_REG) & 0xf;
 
        return insn->n;
 }
@@ -577,8 +582,14 @@ static int pci9118_insn_bits_do(struct comedi_device *dev,
                                struct comedi_insn *insn,
                                unsigned int *data)
 {
+       /*
+        * The digital outputs are set with the same register that
+        * the digital inputs and outputs are read from. But the
+        * outputs are set with bits [3:0] so we can simply write
+        * the s->state to set them.
+        */
        if (comedi_dio_update_state(s, data))
-               outl(s->state & 0x0f, dev->iobase + PCI9118_DO);
+               outl(s->state, dev->iobase + PCI9118_DIO_REG);
 
        data[1] = s->state;
 
@@ -1695,7 +1706,7 @@ static int pci9118_reset(struct comedi_device *dev)
        outl(devpriv->ao_data[0], dev->iobase + PCI9118_AO_REG(0));
        outl(devpriv->ao_data[1], dev->iobase + PCI9118_AO_REG(1));
 
-       outl(0, dev->iobase + PCI9118_DO);      /* reset digi outs to L */
+       outl(0, dev->iobase + PCI9118_DIO_REG); /* reset digi outs to L */
        udelay(10);
        inl(dev->iobase + PCI9118_AI_FIFO_REG);
        outl(0, dev->iobase + PCI9118_DELFIFO); /* flush FIFO */