#ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H
#define __ASM_SH_CPU_SH5_ADDRSPACE_H
+#define PHYS_PERIPHERAL_BLOCK 0x09000000
+#define PHYS_DMAC_BLOCK 0x0e000000
+#define PHYS_PCI_BLOCK 0x60000000
+#define PHYS_EMI_BLOCK 0xff000000
+
/* No segmentation.. */
#endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */
--- /dev/null
+#ifndef __ASM_SH64_IRQ_H
+#define __ASM_SH64_IRQ_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/irq.h
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ *
+ */
+
+
+/*
+ * Encoded IRQs are not considered worth to be supported.
+ * Main reason is that there's no per-encoded-interrupt
+ * enable/disable mechanism (as there was in SH3/4).
+ * An all enabled/all disabled is worth only if there's
+ * a cascaded IC to disable/enable/ack on. Until such
+ * IC is available there's no such support.
+ *
+ * Presumably Encoded IRQs may use extra IRQs beyond 64,
+ * below. Some logic must be added to cope with IRQ_IRL?
+ * in an exclusive way.
+ *
+ * Priorities are set at Platform level, when IRQ_IRL0-3
+ * are set to 0 Encoding is allowed. Otherwise it's not
+ * allowed.
+ */
+
+/* Independent IRQs */
+#define IRQ_IRL0 0
+#define IRQ_IRL1 1
+#define IRQ_IRL2 2
+#define IRQ_IRL3 3
+
+#define IRQ_INTA 4
+#define IRQ_INTB 5
+#define IRQ_INTC 6
+#define IRQ_INTD 7
+
+#define IRQ_SERR 12
+#define IRQ_ERR 13
+#define IRQ_PWR3 14
+#define IRQ_PWR2 15
+#define IRQ_PWR1 16
+#define IRQ_PWR0 17
+
+#define IRQ_DMTE0 18
+#define IRQ_DMTE1 19
+#define IRQ_DMTE2 20
+#define IRQ_DMTE3 21
+#define IRQ_DAERR 22
+
+#define IRQ_TUNI0 32
+#define IRQ_TUNI1 33
+#define IRQ_TUNI2 34
+#define IRQ_TICPI2 35
+
+#define IRQ_ATI 36
+#define IRQ_PRI 37
+#define IRQ_CUI 38
+
+#define IRQ_ERI 39
+#define IRQ_RXI 40
+#define IRQ_BRI 41
+#define IRQ_TXI 42
+
+#define IRQ_ITI 63
+
+#define NR_INTC_IRQS 64
+
+#ifdef CONFIG_SH_CAYMAN
+#define NR_EXT_IRQS 32
+#define START_EXT_IRQS 64
+
+/* PCI bus 2 uses encoded external interrupts on the Cayman board */
+#define IRQ_P2INTA (START_EXT_IRQS + (3*8) + 0)
+#define IRQ_P2INTB (START_EXT_IRQS + (3*8) + 1)
+#define IRQ_P2INTC (START_EXT_IRQS + (3*8) + 2)
+#define IRQ_P2INTD (START_EXT_IRQS + (3*8) + 3)
+
+#define I8042_KBD_IRQ (START_EXT_IRQS + 2)
+#define I8042_AUX_IRQ (START_EXT_IRQS + 6)
+
+#define IRQ_CFCARD (START_EXT_IRQS + 7)
+#define IRQ_PCMCIA (0)
+
+#else
+#define NR_EXT_IRQS 0
+#endif
+
+#define NR_IRQS (NR_INTC_IRQS+NR_EXT_IRQS)
+
+
+/* Default IRQs, fixed */
+#define TIMER_IRQ IRQ_TUNI0
+#define RTC_IRQ IRQ_CUI
+
+/* Default Priorities, Platform may choose differently */
+#define NO_PRIORITY 0 /* Disabled */
+#define TIMER_PRIORITY 2
+#define RTC_PRIORITY TIMER_PRIORITY
+#define SCIF_PRIORITY 3
+#define INTD_PRIORITY 3
+#define IRL3_PRIORITY 4
+#define INTC_PRIORITY 6
+#define IRL2_PRIORITY 7
+#define INTB_PRIORITY 9
+#define IRL1_PRIORITY 10
+#define INTA_PRIORITY 12
+#define IRL0_PRIORITY 13
+#define TOP_PRIORITY 15
+
+extern int intc_evt_to_irq[(0xE20/0x20)+1];
+int intc_irq_describe(char* p, int irq);
+
+#define irq_canonicalize(irq) (irq)
+
+#ifdef CONFIG_SH_CAYMAN
+int cayman_irq_demux(int evt);
+int cayman_irq_describe(char* p, int irq);
+#define irq_demux(x) cayman_irq_demux(x)
+#define irq_describe(p, x) cayman_irq_describe(p, x)
+#else
+#define irq_demux(x) (intc_evt_to_irq[x])
+#define irq_describe(p, x) intc_irq_describe(p, x)
+#endif
+
+/*
+ * Function for "on chip support modules".
+ */
+
+/*
+ * SH-5 supports Priority based interrupts only.
+ * Interrupt priorities are defined at platform level.
+ */
+#define set_ipr_data(a, b, c, d)
+#define make_ipr_irq(a)
+#define make_imask_irq(a)
+
+#endif /* __ASM_SH64_IRQ_H */
--- /dev/null
+#ifndef __ASM_SH64_PLATFORM_H
+#define __ASM_SH64_PLATFORM_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/platform.h
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ *
+ * benedict.gaster@superh.com: 3rd May 2002
+ * Added support for ramdisk, removing statically linked romfs at the same time.
+ */
+
+#include <linux/ioport.h>
+#include <asm/irq.h>
+
+
+/*
+ * Platform definition structure.
+ */
+struct sh64_platform {
+ unsigned int readonly_rootfs;
+ unsigned int ramdisk_flags;
+ unsigned int initial_root_dev;
+ unsigned int loader_type;
+ unsigned int initrd_start;
+ unsigned int initrd_size;
+ unsigned int fpu_flags;
+ unsigned int io_res_count;
+ unsigned int kram_res_count;
+ unsigned int xram_res_count;
+ unsigned int rom_res_count;
+ struct resource *io_res_p;
+ struct resource *kram_res_p;
+ struct resource *xram_res_p;
+ struct resource *rom_res_p;
+};
+
+extern struct sh64_platform platform_parms;
+
+extern unsigned long long memory_start, memory_end;
+
+extern unsigned long long fpu_in_use;
+
+extern int platform_int_priority[NR_INTC_IRQS];
+
+#define FPU_FLAGS (platform_parms.fpu_flags)
+#define STANDARD_IO_RESOURCES (platform_parms.io_res_count)
+#define STANDARD_KRAM_RESOURCES (platform_parms.kram_res_count)
+#define STANDARD_XRAM_RESOURCES (platform_parms.xram_res_count)
+#define STANDARD_ROM_RESOURCES (platform_parms.rom_res_count)
+
+/*
+ * Kernel Memory description, Respectively:
+ * code = last but one memory descriptor
+ * data = last memory descriptor
+ */
+#define code_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 2])
+#define data_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 1])
+
+#endif /* __ASM_SH64_PLATFORM_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/cayman.h
- *
- * Cayman definitions
- *
- * Global defintions for the SH5 Cayman board
- *
- * Copyright (C) 2002 Stuart Menefy
- */
-
-
-/* Setup for the SMSC FDC37C935 / LAN91C100FD */
-#define SMSC_IRQ IRQ_IRL1
-
-/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
-#define PCI2_IRQ IRQ_IRL3
+++ /dev/null
-#ifndef __ASM_SH64_HARDWARE_H
-#define __ASM_SH64_HARDWARE_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/hardware.h
- *
- * Copyright (C) 2002 Stuart Menefy
- * Copyright (C) 2003 Paul Mundt
- *
- * Defitions of the locations of registers in the physical address space.
- */
-
-#define PHYS_PERIPHERAL_BLOCK 0x09000000
-#define PHYS_DMAC_BLOCK 0x0e000000
-#define PHYS_PCI_BLOCK 0x60000000
-#define PHYS_EMI_BLOCK 0xff000000
-
-#endif /* __ASM_SH64_HARDWARE_H */
+++ /dev/null
-#ifndef __ASM_SH64_IRQ_H
-#define __ASM_SH64_IRQ_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/irq.h
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- *
- */
-
-
-/*
- * Encoded IRQs are not considered worth to be supported.
- * Main reason is that there's no per-encoded-interrupt
- * enable/disable mechanism (as there was in SH3/4).
- * An all enabled/all disabled is worth only if there's
- * a cascaded IC to disable/enable/ack on. Until such
- * IC is available there's no such support.
- *
- * Presumably Encoded IRQs may use extra IRQs beyond 64,
- * below. Some logic must be added to cope with IRQ_IRL?
- * in an exclusive way.
- *
- * Priorities are set at Platform level, when IRQ_IRL0-3
- * are set to 0 Encoding is allowed. Otherwise it's not
- * allowed.
- */
-
-/* Independent IRQs */
-#define IRQ_IRL0 0
-#define IRQ_IRL1 1
-#define IRQ_IRL2 2
-#define IRQ_IRL3 3
-
-#define IRQ_INTA 4
-#define IRQ_INTB 5
-#define IRQ_INTC 6
-#define IRQ_INTD 7
-
-#define IRQ_SERR 12
-#define IRQ_ERR 13
-#define IRQ_PWR3 14
-#define IRQ_PWR2 15
-#define IRQ_PWR1 16
-#define IRQ_PWR0 17
-
-#define IRQ_DMTE0 18
-#define IRQ_DMTE1 19
-#define IRQ_DMTE2 20
-#define IRQ_DMTE3 21
-#define IRQ_DAERR 22
-
-#define IRQ_TUNI0 32
-#define IRQ_TUNI1 33
-#define IRQ_TUNI2 34
-#define IRQ_TICPI2 35
-
-#define IRQ_ATI 36
-#define IRQ_PRI 37
-#define IRQ_CUI 38
-
-#define IRQ_ERI 39
-#define IRQ_RXI 40
-#define IRQ_BRI 41
-#define IRQ_TXI 42
-
-#define IRQ_ITI 63
-
-#define NR_INTC_IRQS 64
-
-#ifdef CONFIG_SH_CAYMAN
-#define NR_EXT_IRQS 32
-#define START_EXT_IRQS 64
-
-/* PCI bus 2 uses encoded external interrupts on the Cayman board */
-#define IRQ_P2INTA (START_EXT_IRQS + (3*8) + 0)
-#define IRQ_P2INTB (START_EXT_IRQS + (3*8) + 1)
-#define IRQ_P2INTC (START_EXT_IRQS + (3*8) + 2)
-#define IRQ_P2INTD (START_EXT_IRQS + (3*8) + 3)
-
-#define I8042_KBD_IRQ (START_EXT_IRQS + 2)
-#define I8042_AUX_IRQ (START_EXT_IRQS + 6)
-
-#define IRQ_CFCARD (START_EXT_IRQS + 7)
-#define IRQ_PCMCIA (0)
-
-#else
-#define NR_EXT_IRQS 0
-#endif
-
-#define NR_IRQS (NR_INTC_IRQS+NR_EXT_IRQS)
-
-
-/* Default IRQs, fixed */
-#define TIMER_IRQ IRQ_TUNI0
-#define RTC_IRQ IRQ_CUI
-
-/* Default Priorities, Platform may choose differently */
-#define NO_PRIORITY 0 /* Disabled */
-#define TIMER_PRIORITY 2
-#define RTC_PRIORITY TIMER_PRIORITY
-#define SCIF_PRIORITY 3
-#define INTD_PRIORITY 3
-#define IRL3_PRIORITY 4
-#define INTC_PRIORITY 6
-#define IRL2_PRIORITY 7
-#define INTB_PRIORITY 9
-#define IRL1_PRIORITY 10
-#define INTA_PRIORITY 12
-#define IRL0_PRIORITY 13
-#define TOP_PRIORITY 15
-
-extern int intc_evt_to_irq[(0xE20/0x20)+1];
-int intc_irq_describe(char* p, int irq);
-
-#define irq_canonicalize(irq) (irq)
-
-#ifdef CONFIG_SH_CAYMAN
-int cayman_irq_demux(int evt);
-int cayman_irq_describe(char* p, int irq);
-#define irq_demux(x) cayman_irq_demux(x)
-#define irq_describe(p, x) cayman_irq_describe(p, x)
-#else
-#define irq_demux(x) (intc_evt_to_irq[x])
-#define irq_describe(p, x) intc_irq_describe(p, x)
-#endif
-
-/*
- * Function for "on chip support modules".
- */
-
-/*
- * SH-5 supports Priority based interrupts only.
- * Interrupt priorities are defined at platform level.
- */
-#define set_ipr_data(a, b, c, d)
-#define make_ipr_irq(a)
-#define make_imask_irq(a)
-
-#endif /* __ASM_SH64_IRQ_H */
+++ /dev/null
-/*
- * linux/include/asm-shmedia/keyboard.h
- *
- * Copied from i386 version:
- * Created 3 Nov 1996 by Geert Uytterhoeven
- */
-
-/*
- * This file contains the i386 architecture specific keyboard definitions
- */
-
-#ifndef __ASM_SH64_KEYBOARD_H
-#define __ASM_SH64_KEYBOARD_H
-
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_SH_CAYMAN
-#define KEYBOARD_IRQ (START_EXT_IRQS + 2) /* SMSC SuperIO IRQ 1 */
-#endif
-#define DISABLE_KBD_DURING_INTERRUPTS 0
-
-extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
-extern int pckbd_getkeycode(unsigned int scancode);
-extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
- char raw_mode);
-extern char pckbd_unexpected_up(unsigned char keycode);
-extern void pckbd_leds(unsigned char leds);
-extern void pckbd_init_hw(void);
-
-#define kbd_setkeycode pckbd_setkeycode
-#define kbd_getkeycode pckbd_getkeycode
-#define kbd_translate pckbd_translate
-#define kbd_unexpected_up pckbd_unexpected_up
-#define kbd_leds pckbd_leds
-#define kbd_init_hw pckbd_init_hw
-
-/* resource allocation */
-#define kbd_request_region()
-#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
- "keyboard", NULL)
-
-/* How to access the keyboard macros on this platform. */
-#define kbd_read_input() inb(KBD_DATA_REG)
-#define kbd_read_status() inb(KBD_STATUS_REG)
-#define kbd_write_output(val) outb(val, KBD_DATA_REG)
-#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
-
-/* Some stoneage hardware needs delays after some operations. */
-#define kbd_pause() do { } while(0)
-
-/*
- * Machine specific bits for the PS/2 driver
- */
-
-#ifdef CONFIG_SH_CAYMAN
-#define AUX_IRQ (START_EXT_IRQS + 6) /* SMSC SuperIO IRQ12 */
-#endif
-
-#define aux_request_irq(hand, dev_id) \
- request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
-
-#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_SH64_KEYBOARD_H */
-
+++ /dev/null
-#ifndef __ASM_SH64_PCI_H
-#define __ASM_SH64_PCI_H
-
-#ifdef __KERNEL__
-
-#include <linux/dma-mapping.h>
-
-/* Can be used to override the logic in pci_scan_bus for skipping
- already-configured bus numbers - to be used for buggy BIOSes
- or architectures with incomplete PCI setup by the loader */
-
-#define pcibios_assign_all_busses() 1
-
-/*
- * These are currently the correct values for the STM overdrive board
- * We need some way of setting this on a board specific way, it will
- * not be the same on other boards I think
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
-#define PCIBIOS_MIN_IO 0x2000
-#define PCIBIOS_MIN_MEM 0x40000000
-#endif
-
-extern void pcibios_set_master(struct pci_dev *dev);
-
-/*
- * Set penalize isa irq function
- */
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
- /* We don't do dynamic PCI IRQ allocation */
-}
-
-/* Dynamic DMA mapping stuff.
- * SuperH has everything mapped statically like x86.
- */
-
-/* The PCI address space does equal the physical memory
- * address space. The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <asm/scatterlist.h>
-#include <linux/string.h>
-#include <asm/io.h>
-
-/* pci_unmap_{single,page} being a nop depends upon the
- * configuration.
- */
-#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
- dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
- __u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME) \
- ((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
- (((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME) \
- ((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
- (((PTR)->LEN_NAME) = (VAL))
-#else
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-#endif
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
- enum pci_dma_burst_strategy *strat,
- unsigned long *strategy_parameter)
-{
- *strat = PCI_DMA_BURST_INFINITY;
- *strategy_parameter = ~0UL;
-}
-#endif
-
-/* Board-specific fixup routines. */
-extern void pcibios_fixup(void);
-extern void pcibios_fixup_irqs(void);
-
-#ifdef CONFIG_PCI_AUTO
-extern int pciauto_assign_resources(int busno, struct pci_channel *hose);
-#endif
-
-#endif /* __KERNEL__ */
-
-/* generic pci stuff */
-#include <asm-generic/pci.h>
-
-/* generic DMA-mapping stuff */
-#include <asm-generic/pci-dma-compat.h>
-
-#endif /* __ASM_SH64_PCI_H */
-
+++ /dev/null
-#ifndef __ASM_SH64_PLATFORM_H
-#define __ASM_SH64_PLATFORM_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * include/asm-sh64/platform.h
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- *
- * benedict.gaster@superh.com: 3rd May 2002
- * Added support for ramdisk, removing statically linked romfs at the same time.
- */
-
-#include <linux/ioport.h>
-#include <asm/irq.h>
-
-
-/*
- * Platform definition structure.
- */
-struct sh64_platform {
- unsigned int readonly_rootfs;
- unsigned int ramdisk_flags;
- unsigned int initial_root_dev;
- unsigned int loader_type;
- unsigned int initrd_start;
- unsigned int initrd_size;
- unsigned int fpu_flags;
- unsigned int io_res_count;
- unsigned int kram_res_count;
- unsigned int xram_res_count;
- unsigned int rom_res_count;
- struct resource *io_res_p;
- struct resource *kram_res_p;
- struct resource *xram_res_p;
- struct resource *rom_res_p;
-};
-
-extern struct sh64_platform platform_parms;
-
-extern unsigned long long memory_start, memory_end;
-
-extern unsigned long long fpu_in_use;
-
-extern int platform_int_priority[NR_INTC_IRQS];
-
-#define FPU_FLAGS (platform_parms.fpu_flags)
-#define STANDARD_IO_RESOURCES (platform_parms.io_res_count)
-#define STANDARD_KRAM_RESOURCES (platform_parms.kram_res_count)
-#define STANDARD_XRAM_RESOURCES (platform_parms.xram_res_count)
-#define STANDARD_ROM_RESOURCES (platform_parms.rom_res_count)
-
-/*
- * Kernel Memory description, Respectively:
- * code = last but one memory descriptor
- * data = last memory descriptor
- */
-#define code_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 2])
-#define data_resource (platform_parms.kram_res_p[STANDARD_KRAM_RESOURCES - 1])
-
-#endif /* __ASM_SH64_PLATFORM_H */
+++ /dev/null
-#ifndef __ASM_SH64_THREAD_INFO_H
-#define __ASM_SH64_THREAD_INFO_H
-
-/*
- * SuperH 5 version
- * Copyright (C) 2003 Paul Mundt
- */
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#include <asm/registers.h>
-
-/*
- * low level task data that entry.S needs immediate access to
- * - this struct should fit entirely inside of one cache line
- * - this struct shares the supervisor stack pages
- * - if the contents of this structure are changed, the assembly constants must also be changed
- */
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- unsigned long flags; /* low level flags */
- /* Put the 4 32-bit fields together to make asm offsetting easier. */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
- __u16 cpu;
-
- mm_segment_t addr_limit;
- struct restart_block restart_block;
-
- __u8 supervisor_stack[0];
-};
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .preempt_count = 1, \
- .addr_limit = KERNEL_DS, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
-
- __asm__ __volatile__ ("getcon " __KCR0 ", %0\n\t" : "=r" (ti));
-
- return ti;
-}
-
-/* thread information allocation */
-
-
-
-#define alloc_thread_info(ti) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
-#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
-
-#endif /* __ASSEMBLY__ */
-
-#define THREAD_SIZE 8192
-
-#define PREEMPT_ACTIVE 0x10000000
-
-/* thread information flags */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 2 /* signal pending */
-#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
-#define TIF_MEMDIE 4
-#define TIF_RESTORE_SIGMASK 5 /* Restore signal mask in do_signal */
-
-#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
-#define _TIF_MEMDIE (1 << TIF_MEMDIE)
-#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SH64_THREAD_INFO_H */
projects / deliverable / linux.git / commitdiff
