# and then Sanitize.
===================================================================
-*** 1.4 1992/06/10 02:05:16
---- config/amix.mh 1992/07/21 20:18:16
-***************
-*** 22,24 ****
---- 22,38 ----
-
- # SVR4 puts the BSD compatible install in /usr/ucb.
- INSTALL = /usr/ucb/install -c
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
-===================================================================
-*** 1.4 1992/06/15 19:25:13
---- config/ncr3000.mh 1992/09/15 01:51:32
+*** 2.71 1992/09/25 17:04:36
+--- .Sanitize 1992/09/25 23:47:40
***************
-*** 38,40 ****
---- 38,59 ----
- # The /usr/ucb/install program is incompatible (complains about unknown
- # group staff). Use good old cp...
- INSTALL = cp
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ XM_CLIBS = -L/usr/lib -lm -lnet -lresolv -lform -lsocket -lnsl -lc
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
-+
-+ # These are the libs that are needed for the Energize version of gdb on
-+ # SVR4. Note that we MUST include the standard C library before libucb.a,
-+ # otherwise we get lots of broken stuff we don't want.
-+ ENERGIZE_LIB = energize/libconn.a
-+ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
-+ -lsocket -lc /usr/ucblib/libucb.a -lnsl
-===================================================================
-diff -c -r2.70 .Sanitize
-*** 2.70 1992/09/03 16:25:59
---- .Sanitize 1992/09/15 05:19:46
-***************
-*** 73,78 ****
---- 73,81 ----
+*** 74,79 ****
+--- 74,82 ----
doc
dwarfread.c
elfread.c
environ.h
eval.c
===================================================================
-*** 1.181 1992/09/08 22:33:31
---- Makefile.in 1992/09/15 05:21:40
+*** 1.186 1992/09/25 17:03:18
+--- Makefile.in 1992/09/26 00:20:58
***************
*** 123,128 ****
--- 123,135 ----
# -I. for config files.
# -I${srcdir} possibly for regex.h also.
***************
-*** 159,170 ****
+*** 158,164 ****
# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
# TERMCAP comes after readline, since readline depends on it.
- CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
-! ${XM_CLIBS} ${TM_CLIBS}
- CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
- ${RL_LIB} ${MMALLOC_LIB}
+ CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
+! ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
+ CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
+ ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
- ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
-! ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES}
-
- VERSION = 4.6.6
- DIST=gdb
---- 166,178 ----
+--- 165,171 ----
# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
# TERMCAP comes after readline, since readline depends on it.
- CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
-! ${ENERGIZE_LIB} ${XM_CLIBS} ${TM_CLIBS}
- CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
- ${RL_LIB} ${MMALLOC_LIB}
-
- ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
-! ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} \
-! ${ENERGIZE_LIB}
+ CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
+! ${ENERGIZE_LIB} ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
+ CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
+ ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
- VERSION = 4.6.6
- DIST=gdb
***************
-*** 201,207 ****
+*** 200,206 ****
mem-break.c target.c inftarg.c \
dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c stabsread.c \
ieee-float.c language.c parse.c buildsym.c objfiles.c \
# Source files in subdirectories (which will be handled separately by
# 'make gdb.tar.Z').
---- 209,215 ----
+--- 207,213 ----
mem-break.c target.c inftarg.c \
dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c stabsread.c \
ieee-float.c language.c parse.c buildsym.c objfiles.c \
# Source files in subdirectories (which will be handled separately by
# 'make gdb.tar.Z').
***************
-*** 287,293 ****
+*** 289,295 ****
command.o utils.o expprint.o environ.o version.o gdbtypes.o \
copying.o $(DEPFILES) mem-break.o target.o \
inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
! buildsym.o objfiles.o minsyms.o maint.o demangle.o \
dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o \
- stabsread.o
+ stabsread.o core.o
---- 295,301 ----
+--- 296,302 ----
command.o utils.o expprint.o environ.o version.o gdbtypes.o \
copying.o $(DEPFILES) mem-break.o target.o \
inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
! buildsym.o objfiles.o minsyms.o maint.o demangle.o energize.o \
dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o \
- stabsread.o
+ stabsread.o core.o
***************
-*** 301,307 ****
+*** 303,309 ****
NTSSTART = kdb-start.o
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.tab.c m2-exp.tab.c
---- 309,315 ----
+--- 310,316 ----
NTSSTART = kdb-start.o
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.tab.c m2-exp.tab.c
***************
-*** 363,368 ****
---- 371,390 ----
+*** 365,370 ****
+--- 372,391 ----
#load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
echo "Load .c corresponding to:" $(DEPFILES)
# This is useful when debugging GDB, because some Unix's don't let you run GDB
# on itself without copying the executable. So "make gdb1" will make
===================================================================
-*** 1.46 1992/09/15 06:27:18
---- breakpoint.c 1992/09/15 06:33:37
+*** 1.47 1992/09/19 11:47:08
+--- breakpoint.c 1992/09/25 23:47:48
***************
*** 273,278 ****
--- 273,279 ----
error ("Junk at end of expression");
}
***************
-*** 316,327 ****
- ALL_BREAKPOINTS (b)
- if (b->number == bnum)
- {
-! if (from_tty && input_from_terminal_p ())
- printf_filtered ("Type commands for when breakpoint %d is hit, one per line.\n\
- End with a line saying just \"end\".\n", bnum);
- l = read_command_lines ();
- free_command_lines (&b->commands);
- b->commands = l;
- return;
- }
- error ("No breakpoint number %d.", bnum);
---- 318,330 ----
- ALL_BREAKPOINTS (b)
- if (b->number == bnum)
- {
-! if ((from_tty && input_from_terminal_p ()) || energize)
- printf_filtered ("Type commands for when breakpoint %d is hit, one per line.\n\
- End with a line saying just \"end\".\n", bnum);
+*** 322,327 ****
+--- 324,330 ----
l = read_command_lines ();
free_command_lines (&b->commands);
b->commands = l;
if (xgdb_verbose && bpt->type == bp_breakpoint)
===================================================================
*** 1.18 1992/07/10 17:22:30
---- command.c 1992/07/23 01:42:36
+--- command.c 1992/09/18 19:23:13
***************
*** 1093,1098 ****
--- 1093,1100 ----
}
if (pid != -1)
-! while ((rc = energize_wait (&status)) != pid && rc != -1)
+! while ((rc = energize_shell_wait (&status)) != pid && rc != -1)
;
else
error ("Fork failed");
===================================================================
-*** 1.63 1992/09/03 16:26:02
---- configure.in 1992/09/15 05:19:56
+*** 1.67 1992/09/21 20:01:00
+--- configure.in 1992/09/25 23:47:53
***************
*** 1,4 ****
! configdirs="doc"
srcname="GDB"
srctrigger=main.c
- target_dependent=true
+
--- 1,4 ----
! configdirs="energize doc"
srcname="GDB"
srctrigger=main.c
- target_dependent=true
+
===================================================================
*** 1.48 1992/09/15 08:55:59
--- defs.h 1992/09/15 08:54:35
/* String name for the current demangling style. Set by the "set demangling"
===================================================================
-*** 1.28 1992/07/23 04:41:45
---- inflow.c 1992/08/27 22:43:15
+*** 1.29 1992/09/25 19:19:00
+--- inflow.c 1992/09/25 23:48:13
***************
-*** 89,95 ****
+*** 87,93 ****
static short pgrp_inferior;
static short pgrp_ours;
# else /* not def SHORT_PGRP */
static int pgrp_ours;
# endif /* not def SHORT_PGRP */
#else /* not def TIOCGPGRP */
---- 89,95 ----
+--- 87,93 ----
static short pgrp_inferior;
static short pgrp_ours;
# else /* not def SHORT_PGRP */
# endif /* not def SHORT_PGRP */
#else /* not def TIOCGPGRP */
===================================================================
-*** 1.54 1992/09/02 09:22:09
---- infrun.c 1992/09/15 05:20:09
-***************
-*** 633,638 ****
---- 633,639 ----
- Here we must get it up to actual execution of the real program. */
-
- inferior_pid = pid; /* Needed for wait_for_inferior stuff below */
-+ energize_new_process();
-
- clear_proceed_status ();
-
-***************
-*** 771,776 ****
---- 772,778 ----
-
- attach (pid);
- inferior_pid = pid;
-+ energize_new_process();
- push_target (&child_ops);
-
- mark_breakpoints_out ();
-===================================================================
-*** 1.11 1992/03/29 23:21:27
---- inftarg.c 1992/09/15 06:37:01
+*** 1.14 1992/09/25 19:19:08
+--- inftarg.c 1992/09/26 00:25:51
***************
-*** 55,65 ****
+*** 76,86 ****
int pid;
do {
if (pid == -1) /* No more children to wait for */
{
fprintf (stderr, "Child process unexpectedly missing.\n");
---- 55,61 ----
+--- 76,82 ----
int pid;
do {
if (pid == -1) /* No more children to wait for */
{
fprintf (stderr, "Child process unexpectedly missing.\n");
+***************
+*** 138,143 ****
+--- 134,140 ----
+
+ attach (pid);
+ inferior_pid = pid;
++ energize_new_process();
+ push_target (&child_ops);
+
+ mark_breakpoints_out ();
+***************
+*** 394,399 ****
+--- 391,397 ----
+ Here we must get it up to actual execution of the real program. */
+
+ inferior_pid = pid; /* Needed for wait_for_inferior stuff below */
++ energize_new_process();
+
+ clear_proceed_status ();
+
===================================================================
-*** 1.52 1992/09/15 06:27:10
---- main.c 1992/09/15 06:30:03
+*** 1.56 1992/09/22 05:23:29
+--- main.c 1992/09/25 23:48:21
***************
-*** 426,431 ****
---- 426,432 ----
+*** 441,446 ****
+--- 441,447 ----
char *corearg = NULL;
char *cdarg = NULL;
char *ttyarg = NULL;
/* Pointers to all arguments of +command option. */
char **cmdarg;
***************
-*** 524,529 ****
---- 525,531 ----
+*** 539,544 ****
+--- 540,546 ----
{"tty", required_argument, 0, 't'},
{"baud", required_argument, 0, 'b'},
{"b", required_argument, 0, 'b'},
#ifdef ADDITIONAL_OPTIONS
ADDITIONAL_OPTIONS
***************
-*** 556,561 ****
---- 558,566 ----
+*** 571,576 ****
+--- 573,581 ----
case 11:
cdarg = optarg;
break;
symarg = optarg;
break;
***************
-*** 664,669 ****
---- 669,677 ----
+*** 679,684 ****
+--- 684,692 ----
/* Run the init function of each source file */
initialize_all_files ();
initialize_main (); /* But that omits this file! Do it now */
***************
-*** 850,856 ****
+*** 853,859 ****
if (!setjmp (to_top_level))
{
do_cleanups (ALL_CLEANUPS); /* Do complete cleanup */
quit_command ((char *)0, instream == stdin);
}
}
---- 858,867 ----
+--- 861,870 ----
if (!setjmp (to_top_level))
{
do_cleanups (ALL_CLEANUPS); /* Do complete cleanup */
}
}
***************
-*** 912,918 ****
+*** 915,921 ****
else if (c->function.cfunc == NO_FUNCTION)
error ("That is not a command, just a help topic.");
else
}
/* Tell the user if the language has changed (except first time). */
---- 923,929 ----
+--- 926,932 ----
else if (c->function.cfunc == NO_FUNCTION)
error ("That is not a command, just a help topic.");
else
/* Tell the user if the language has changed (except first time). */
***************
-*** 1564,1570 ****
+*** 1570,1576 ****
while (1)
{
dont_repeat ();
if (p == NULL)
/* Treat end of file like "end". */
break;
---- 1575,1581 ----
+--- 1581,1587 ----
while (1)
{
dont_repeat ();
}
===================================================================
-*** 1.34 1992/09/11 09:11:04
---- stack.c 1992/09/15 05:20:25
+*** 1.35 1992/09/18 09:20:00
+--- stack.c 1992/09/25 23:48:37
***************
*** 159,165 ****
if (addressprint)
wrap_here (" ");
if (sal.symtab)
===================================================================
-*** 1.57 1992/09/15 06:27:08
---- symfile.c 1992/09/15 06:30:09
+*** 1.58 1992/09/19 16:55:36
+--- symfile.c 1992/09/25 23:48:39
***************
-*** 611,616 ****
---- 611,618 ----
+*** 614,619 ****
+--- 614,621 ----
fflush (stdout);
}
}
===================================================================
-*** 1.60 1992/09/15 06:26:56
---- utils.c 1992/09/15 08:57:41
+*** 1.62 1992/09/18 09:21:36
+--- utils.c 1992/09/25 23:48:47
***************
*** 700,720 ****
fflush (stdout);
}
***************
-*** 988,993 ****
---- 1000,1011 ----
+*** 1000,1005 ****
+--- 1012,1023 ----
if (linebuffer == 0)
return;
}
if (i < len)
fprintf_filtered (stream, "...");
+===================================================================
+*** 1.4 1992/06/10 02:05:16
+--- config/amix.mh 1992/07/21 20:18:16
+***************
+*** 22,24 ****
+--- 22,38 ----
+
+ # SVR4 puts the BSD compatible install in /usr/ucb.
+ INSTALL = /usr/ucb/install -c
++
++ # These are the libs that are needed for the Energize version of gdb on
++ # SVR4. Note that we MUST include the standard C library before libucb.a,
++ # otherwise we get lots of broken stuff we don't want.
++ ENERGIZE_LIB = energize/libconn.a
++ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
++ -lsocket -lc /usr/ucblib/libucb.a -lnsl
++
++ # These are the libs that are needed for the Energize version of gdb on
++ # SVR4. Note that we MUST include the standard C library before libucb.a,
++ # otherwise we get lots of broken stuff we don't want.
++ ENERGIZE_LIB = energize/libconn.a
++ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
++ -lsocket -lc /usr/ucblib/libucb.a -lnsl
+===================================================================
+*** 1.4 1992/06/15 19:25:13
+--- config/ncr3000.mh 1992/09/15 01:51:32
+***************
+*** 38,40 ****
+--- 38,59 ----
+ # The /usr/ucb/install program is incompatible (complains about unknown
+ # group staff). Use good old cp...
+ INSTALL = cp
++
++ # These are the libs that are needed for the Energize version of gdb on
++ # SVR4. Note that we MUST include the standard C library before libucb.a,
++ # otherwise we get lots of broken stuff we don't want.
++ XM_CLIBS = -L/usr/lib -lm -lnet -lresolv -lform -lsocket -lnsl -lc
++
++ # These are the libs that are needed for the Energize version of gdb on
++ # SVR4. Note that we MUST include the standard C library before libucb.a,
++ # otherwise we get lots of broken stuff we don't want.
++ ENERGIZE_LIB = energize/libconn.a
++ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
++ -lsocket -lc /usr/ucblib/libucb.a -lnsl
++
++ # These are the libs that are needed for the Energize version of gdb on
++ # SVR4. Note that we MUST include the standard C library before libucb.a,
++ # otherwise we get lots of broken stuff we don't want.
++ ENERGIZE_LIB = energize/libconn.a
++ ENERGIZE_LIBS = ${ENERGIZE_LIB} -L/usr/lib -lm -lnet -lresolv -lform \
++ -lsocket -lc /usr/ucblib/libucb.a -lnsl
projects / deliverable / binutils-gdb.git / commitdiff
