ARM: ux500: 8500: add IDLE pin configuration for SPI

This adds an idle state to the SPI pin control entry.

Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 8ab86889f037c5a824adc034ebc5c20b7343c2bc..9c9e4658023460ab88ca58753abaf4a8d2b34b66 100644 (file)
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -70,6 +70,9 @@ BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_NOPULL|PIN_S
        PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func)
 #define DB8500_PIN(pin,conf,dev) \
        PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf)
+#define DB8500_PIN_IDLE(pin, conf, dev) \
+       PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_IDLE, "pinctrl-db8500",  \
+                           pin, conf)
 #define DB8500_PIN_SLEEP(pin, conf, dev) \
        PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \
                            pin, conf)
@@ -242,7 +245,12 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
        DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */
        DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
        DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
+       /* SPI2 idle state */
+       DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
+       DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
+       DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
        /* SPI2 sleep state */
+       DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */
        DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
        DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
        DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */