ath10k: unify tx mode and dispatch
authorMichal Kazior <michal.kazior@tieto.com>
Mon, 30 Mar 2015 06:51:51 +0000 (09:51 +0300)
committerKalle Valo <kvalo@qca.qualcomm.com>
Mon, 30 Mar 2015 12:00:25 +0000 (15:00 +0300)
There are a few different tx paths depending on
firmware and frame itself.

Creating a uniform decision will make it possible
to switch between different txmode easier, both
for testing and for future features as well.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
drivers/net/wireless/ath/ath10k/core.h
drivers/net/wireless/ath/ath10k/htt_rx.c
drivers/net/wireless/ath/ath10k/htt_tx.c
drivers/net/wireless/ath/ath10k/mac.c
drivers/net/wireless/ath/ath10k/mac.h

index 348efd88bccf616d8dc0c3925b03a96a22b31951..44ed09093dfc9754ce1e1cec149b80fc8a323655 100644 (file)
@@ -84,6 +84,8 @@ struct ath10k_skb_cb {
        dma_addr_t paddr;
        u8 eid;
        u8 vdev_id;
+       enum ath10k_hw_txrx_mode txmode;
+       bool is_protected;
 
        struct {
                u8 tid;
index 21e92537dc5010080463e1fe18d29055c7eb58ed..a4d19d0b6c53d11996d7106322cd4fc5ac21b69e 100644 (file)
@@ -637,14 +637,6 @@ static int ath10k_htt_rx_crypto_tail_len(struct ath10k *ar,
        return 0;
 }
 
-struct rfc1042_hdr {
-       u8 llc_dsap;
-       u8 llc_ssap;
-       u8 llc_ctrl;
-       u8 snap_oui[3];
-       __be16 snap_type;
-} __packed;
-
 struct amsdu_subframe_hdr {
        u8 dst[ETH_ALEN];
        u8 src[ETH_ALEN];
index cbd2bc9e62025fbdc861f4913b00f41c4222bbb9..5b2c61b0390a2d25d680d08b1a7093432764eb54 100644 (file)
@@ -420,9 +420,8 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
        int res;
        u8 flags0 = 0;
        u16 msdu_id, flags1 = 0;
-       dma_addr_t paddr;
-       u32 frags_paddr;
-       bool use_frags;
+       dma_addr_t paddr = 0;
+       u32 frags_paddr = 0;
 
        res = ath10k_htt_tx_inc_pending(htt);
        if (res)
@@ -440,12 +439,6 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
        prefetch_len = min(htt->prefetch_len, msdu->len);
        prefetch_len = roundup(prefetch_len, 4);
 
-       /* Since HTT 3.0 there is no separate mgmt tx command. However in case
-        * of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx
-        * fragment list host driver specifies directly frame pointer. */
-       use_frags = htt->target_version_major < 3 ||
-                   !ieee80211_is_mgmt(hdr->frame_control);
-
        skb_cb->htt.txbuf = dma_pool_alloc(htt->tx_pool, GFP_ATOMIC,
                                           &paddr);
        if (!skb_cb->htt.txbuf) {
@@ -466,7 +459,12 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
        if (res)
                goto err_free_txbuf;
 
-       if (likely(use_frags)) {
+       switch (skb_cb->txmode) {
+       case ATH10K_HW_TXRX_RAW:
+       case ATH10K_HW_TXRX_NATIVE_WIFI:
+               flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT;
+               /* pass through */
+       case ATH10K_HW_TXRX_ETHERNET:
                frags = skb_cb->htt.txbuf->frags;
 
                frags[0].paddr = __cpu_to_le32(skb_cb->paddr);
@@ -474,15 +472,17 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
                frags[1].paddr = 0;
                frags[1].len = 0;
 
-               flags0 |= SM(ATH10K_HW_TXRX_NATIVE_WIFI,
-                            HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
+               flags0 |= SM(skb_cb->txmode, HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
 
                frags_paddr = skb_cb->htt.txbuf_paddr;
-       } else {
+               break;
+       case ATH10K_HW_TXRX_MGMT:
                flags0 |= SM(ATH10K_HW_TXRX_MGMT,
                             HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
+               flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT;
 
                frags_paddr = skb_cb->paddr;
+               break;
        }
 
        /* Normally all commands go through HTC which manages tx credits for
@@ -508,11 +508,9 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
                        prefetch_len);
        skb_cb->htt.txbuf->htc_hdr.flags = 0;
 
-       if (!ieee80211_has_protected(hdr->frame_control))
+       if (!skb_cb->is_protected)
                flags0 |= HTT_DATA_TX_DESC_FLAGS0_NO_ENCRYPT;
 
-       flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT;
-
        flags1 |= SM((u16)vdev_id, HTT_DATA_TX_DESC_FLAGS1_VDEV_ID);
        flags1 |= SM((u16)tid, HTT_DATA_TX_DESC_FLAGS1_EXT_TID);
        if (msdu->ip_summed == CHECKSUM_PARTIAL) {
index 87ecc3e092416ee87e37a192d090bbf409a1264c..7a21aee204f42694945a899c81e2f60b670dc039 100644 (file)
@@ -2522,6 +2522,43 @@ static u8 ath10k_tx_h_get_vdev_id(struct ath10k *ar, struct ieee80211_vif *vif)
        return 0;
 }
 
+static enum ath10k_hw_txrx_mode
+ath10k_tx_h_get_txmode(struct ath10k *ar, struct ieee80211_vif *vif,
+                      struct sk_buff *skb)
+{
+       const struct ieee80211_hdr *hdr = (void *)skb->data;
+       __le16 fc = hdr->frame_control;
+
+       if (!vif || vif->type == NL80211_IFTYPE_MONITOR)
+               return ATH10K_HW_TXRX_RAW;
+
+       if (ieee80211_is_mgmt(fc))
+               return ATH10K_HW_TXRX_MGMT;
+
+       /* Workaround:
+        *
+        * NullFunc frames are mostly used to ping if a client or AP are still
+        * reachable and responsive. This implies tx status reports must be
+        * accurate - otherwise either mac80211 or userspace (e.g. hostapd) can
+        * come to a conclusion that the other end disappeared and tear down
+        * BSS connection or it can never disconnect from BSS/client (which is
+        * the case).
+        *
+        * Firmware with HTT older than 3.0 delivers incorrect tx status for
+        * NullFunc frames to driver. However there's a HTT Mgmt Tx command
+        * which seems to deliver correct tx reports for NullFunc frames. The
+        * downside of using it is it ignores client powersave state so it can
+        * end up disconnecting sleeping clients in AP mode. It should fix STA
+        * mode though because AP don't sleep.
+        */
+       if (ar->htt.target_version_major < 3 &&
+           (ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc)) &&
+           !test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX, ar->fw_features))
+               return ATH10K_HW_TXRX_MGMT;
+
+       return ATH10K_HW_TXRX_NATIVE_WIFI;
+}
+
 /* HTT Tx uses Native Wifi tx mode which expects 802.11 frames without QoS
  * Control in the header.
  */
@@ -2550,6 +2587,33 @@ static void ath10k_tx_h_nwifi(struct ieee80211_hw *hw, struct sk_buff *skb)
        hdr->frame_control &= ~__cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
 }
 
+static void ath10k_tx_h_8023(struct sk_buff *skb)
+{
+       struct ieee80211_hdr *hdr;
+       struct rfc1042_hdr *rfc1042;
+       struct ethhdr *eth;
+       size_t hdrlen;
+       u8 da[ETH_ALEN];
+       u8 sa[ETH_ALEN];
+       __be16 type;
+
+       hdr = (void *)skb->data;
+       hdrlen = ieee80211_hdrlen(hdr->frame_control);
+       rfc1042 = (void *)skb->data + hdrlen;
+
+       ether_addr_copy(da, ieee80211_get_DA(hdr));
+       ether_addr_copy(sa, ieee80211_get_SA(hdr));
+       type = rfc1042->snap_type;
+
+       skb_pull(skb, hdrlen + sizeof(*rfc1042));
+       skb_push(skb, sizeof(*eth));
+
+       eth = (void *)skb->data;
+       ether_addr_copy(eth->h_dest, da);
+       ether_addr_copy(eth->h_source, sa);
+       eth->h_proto = type;
+}
+
 static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar,
                                       struct ieee80211_vif *vif,
                                       struct sk_buff *skb)
@@ -2586,45 +2650,51 @@ static bool ath10k_mac_need_offchan_tx_work(struct ath10k *ar)
                 ar->htt.target_version_minor >= 4);
 }
 
-static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
+static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb)
 {
-       struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+       struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue;
        int ret = 0;
 
-       if (ar->htt.target_version_major >= 3) {
-               /* Since HTT 3.0 there is no separate mgmt tx command */
-               ret = ath10k_htt_tx(&ar->htt, skb);
-               goto exit;
+       spin_lock_bh(&ar->data_lock);
+
+       if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) {
+               ath10k_warn(ar, "wmi mgmt tx queue is full\n");
+               ret = -ENOSPC;
+               goto unlock;
        }
 
-       if (ieee80211_is_mgmt(hdr->frame_control)) {
-               if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
-                            ar->fw_features)) {
-                       if (skb_queue_len(&ar->wmi_mgmt_tx_queue) >=
-                           ATH10K_MAX_NUM_MGMT_PENDING) {
-                               ath10k_warn(ar, "reached WMI management transmit queue limit\n");
-                               ret = -EBUSY;
-                               goto exit;
-                       }
+       __skb_queue_tail(q, skb);
+       ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
 
-                       skb_queue_tail(&ar->wmi_mgmt_tx_queue, skb);
-                       ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
-               } else {
-                       ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
-               }
-       } else if (!test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
-                            ar->fw_features) &&
-                  ieee80211_is_nullfunc(hdr->frame_control)) {
-               /* FW does not report tx status properly for NullFunc frames
-                * unless they are sent through mgmt tx path. mac80211 sends
-                * those frames when it detects link/beacon loss and depends
-                * on the tx status to be correct. */
-               ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
-       } else {
-               ret = ath10k_htt_tx(&ar->htt, skb);
+unlock:
+       spin_unlock_bh(&ar->data_lock);
+
+       return ret;
+}
+
+static void ath10k_mac_tx(struct ath10k *ar, struct sk_buff *skb)
+{
+       struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);
+       struct ath10k_htt *htt = &ar->htt;
+       int ret = 0;
+
+       switch (cb->txmode) {
+       case ATH10K_HW_TXRX_RAW:
+       case ATH10K_HW_TXRX_NATIVE_WIFI:
+       case ATH10K_HW_TXRX_ETHERNET:
+               ret = ath10k_htt_tx(htt, skb);
+               break;
+       case ATH10K_HW_TXRX_MGMT:
+               if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
+                            ar->fw_features))
+                       ret = ath10k_mac_tx_wmi_mgmt(ar, skb);
+               else if (ar->htt.target_version_major >= 3)
+                       ret = ath10k_htt_tx(htt, skb);
+               else
+                       ret = ath10k_htt_mgmt_tx(htt, skb);
+               break;
        }
 
-exit:
        if (ret) {
                ath10k_warn(ar, "failed to transmit packet, dropping: %d\n",
                            ret);
@@ -2697,7 +2767,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
                ar->offchan_tx_skb = skb;
                spin_unlock_bh(&ar->data_lock);
 
-               ath10k_tx_htt(ar, skb);
+               ath10k_mac_tx(ar, skb);
 
                ret = wait_for_completion_timeout(&ar->offchan_tx_completed,
                                                  3 * HZ);
@@ -2922,6 +2992,7 @@ static void ath10k_tx(struct ieee80211_hw *hw,
        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
        struct ieee80211_vif *vif = info->control.vif;
        struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+       __le16 fc = hdr->frame_control;
 
        /* We should disable CCK RATE due to P2P */
        if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
@@ -2931,12 +3002,26 @@ static void ath10k_tx(struct ieee80211_hw *hw,
        ATH10K_SKB_CB(skb)->htt.freq = 0;
        ATH10K_SKB_CB(skb)->htt.tid = ath10k_tx_h_get_tid(hdr);
        ATH10K_SKB_CB(skb)->vdev_id = ath10k_tx_h_get_vdev_id(ar, vif);
+       ATH10K_SKB_CB(skb)->txmode = ath10k_tx_h_get_txmode(ar, vif, skb);
+       ATH10K_SKB_CB(skb)->is_protected = ieee80211_has_protected(fc);
 
-       /* it makes no sense to process injected frames like that */
-       if (vif && vif->type != NL80211_IFTYPE_MONITOR) {
+       switch (ATH10K_SKB_CB(skb)->txmode) {
+       case ATH10K_HW_TXRX_MGMT:
+       case ATH10K_HW_TXRX_NATIVE_WIFI:
                ath10k_tx_h_nwifi(hw, skb);
                ath10k_tx_h_add_p2p_noa_ie(ar, vif, skb);
                ath10k_tx_h_seq_no(vif, skb);
+               break;
+       case ATH10K_HW_TXRX_ETHERNET:
+               ath10k_tx_h_8023(skb);
+               break;
+       case ATH10K_HW_TXRX_RAW:
+               /* FIXME: Packet injection isn't implemented. It should be
+                * doable with firmware 10.2 on qca988x.
+                */
+               WARN_ON_ONCE(1);
+               ieee80211_free_txskb(hw, skb);
+               return;
        }
 
        if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
@@ -2958,7 +3043,7 @@ static void ath10k_tx(struct ieee80211_hw *hw,
                }
        }
 
-       ath10k_tx_htt(ar, skb);
+       ath10k_mac_tx(ar, skb);
 }
 
 /* Must not be called with conf_mutex held as workers can use that also. */
index 3b64d99f9eeab6be64e344de960491ae455fea0e..2cdf68d7f08c103084fd9875ceb096a28c3f3d3b 100644 (file)
@@ -28,6 +28,14 @@ struct ath10k_generic_iter {
        int ret;
 };
 
+struct rfc1042_hdr {
+       u8 llc_dsap;
+       u8 llc_ssap;
+       u8 llc_ctrl;
+       u8 snap_oui[3];
+       __be16 snap_type;
+} __packed;
+
 struct ath10k *ath10k_mac_create(size_t priv_size);
 void ath10k_mac_destroy(struct ath10k *ar);
 int ath10k_mac_register(struct ath10k *ar);
This page took 0.030715 seconds and 5 git commands to generate.