L: linux-scsi@vger.kernel.org
S: Maintained
+NETEM NETWORK EMULATOR
+P: Stephen Hemminger
+M: shemminger@osdl.org
+L: netem@osdl.org
+S: Maintained
+
NETFILTER/IPTABLES/IPCHAINS
P: Rusty Russell
P: Marc Boucher
config ESI_DONGLE
tristate "ESI JetEye PC dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Extended Systems
JetEye PC dongle. To compile it as a module, choose M here. The ESI
config ACTISYS_DONGLE
tristate "ACTiSYS IR-220L and IR220L+ dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the ACTiSYS IR-220L and
IR220L+ dongles. To compile it as a module, choose M here. The
config TEKRAM_DONGLE
tristate "Tekram IrMate 210B dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Tekram IrMate 210B
dongle. To compile it as a module, choose M here. The Tekram dongle
config TOIM3232_DONGLE
tristate "TOIM3232 IrDa dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Vishay/Temic
TOIM3232 and TOIM4232 based dongles.
config LITELINK_DONGLE
tristate "Parallax LiteLink dongle"
- depends on DONGLE && IRDA
+ depends on IRTTY_SIR && DONGLE && IRDA
help
Say Y here if you want to build support for the Parallax Litelink
dongle. To compile it as a module, choose M here. The Parallax
config MA600_DONGLE
tristate "Mobile Action MA600 dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Mobile Action MA600
dongle. To compile it as a module, choose M here. The MA600 dongle
config GIRBIL_DONGLE
tristate "Greenwich GIrBIL dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Greenwich GIrBIL
dongle. If you want to compile it as a module, choose M here.
config MCP2120_DONGLE
tristate "Microchip MCP2120"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Microchip MCP2120
dongle. If you want to compile it as a module, choose M here.
config OLD_BELKIN_DONGLE
tristate "Old Belkin dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the Adaptec Airport 1000
and 2000 dongles. If you want to compile it as a module, choose
config ACT200L_DONGLE
tristate "ACTiSYS IR-200L dongle"
- depends on DONGLE && IRDA && EXPERIMENTAL
+ depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
help
Say Y here if you want to build support for the ACTiSYS IR-200L
dongle. If you want to compile it as a module, choose M here.
* sure which should go first, but I bet it won't make much
* difference if we are running VLANs. The good news is that
* this protocol won't be in the list unless compiled in, so
- * the average user (w/out VLANs) will not be adversly affected.
+ * the average user (w/out VLANs) will not be adversely affected.
* --BLG
*
* 0800 IP
static struct list_head ptype_all; /* Taps */
/*
- * The @dev_base list is protected by @dev_base_lock and the rtln
+ * The @dev_base list is protected by @dev_base_lock and the rtnl
* semaphore.
*
* Pure readers hold dev_base_lock for reading.
* @name: name format string
*
* Passed a format string - eg "lt%d" it will try and find a suitable
- * id. Not efficient for many devices, not called a lot. The caller
- * must hold the dev_base or rtnl lock while allocating the name and
- * adding the device in order to avoid duplicates. Returns the number
- * of the unit assigned or a negative errno code.
+ * id. It scans list of devices to build up a free map, then chooses
+ * the first empty slot. The caller must hold the dev_base or rtnl lock
+ * while allocating the name and adding the device in order to avoid
+ * duplicates.
+ * Limited to bits_per_byte * page size devices (ie 32K on most platforms).
+ * Returns the number of the unit assigned or a negative errno code.
*/
int dev_alloc_name(struct net_device *dev, const char *name)
}
/**
- * netdev_features_change - device changes fatures
+ * netdev_features_change - device changes features
* @dev: device to cause notification
*
* Called to indicate a device has changed features.
* @dev: device
* @inc: modifier
*
- * Add or remove promsicuity from a device. While the count in the device
+ * Add or remove promiscuity from a device. While the count in the device
* remains above zero the interface remains promiscuous. Once it hits zero
* the device reverts back to normal filtering operation. A negative inc
* value is used to drop promiscuity on the device.
void free_netdev(struct net_device *dev)
{
#ifdef CONFIG_SYSFS
- /* Compatiablity with error handling in drivers */
+ /* Compatibility with error handling in drivers */
if (dev->reg_state == NETREG_UNINITIALIZED) {
kfree((char *)dev - dev->padded);
return;
{
struct neighbour *neigh = rt->rt6i_nexthop;
int m = 0;
- if (neigh) {
+ if (rt->rt6i_flags & RTF_NONEXTHOP ||
+ !(rt->rt6i_flags & RTF_GATEWAY))
+ m = 1;
+ else if (neigh) {
read_lock_bh(&neigh->lock);
if (neigh->nud_state & NUD_VALID)
- m = 1;
+ m = 2;
read_unlock_bh(&neigh->lock);
}
return m;
static int rt6_score_route(struct rt6_info *rt, int oif,
int strict)
{
- int m = rt6_check_dev(rt, oif);
+ int m, n;
+
+ m = rt6_check_dev(rt, oif);
if (!m && (strict & RT6_SELECT_F_IFACE))
return -1;
#ifdef CONFIG_IPV6_ROUTER_PREF
m |= IPV6_DECODE_PREF(IPV6_EXTRACT_PREF(rt->rt6i_flags)) << 2;
#endif
- if (rt6_check_neigh(rt))
+ n = rt6_check_neigh(rt);
+ if (n > 1)
m |= 16;
- else if (strict & RT6_SELECT_F_REACHABLE)
+ else if (!n && strict & RT6_SELECT_F_REACHABLE)
return -1;
return m;
}