ARM: dts: omap5-uevm: Add uart pinctrl data

Booting omap5 uevm results in the following error
"did not get pins for uart error: -19"

This happens because omap5 uevm dts file is not adapted
to use uart through pinctrl framework.
Populate uart pinctrl data to get rid of the error.

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
[r.sricharan@ti.com: Replaced constants with preprocessor macros]
Signed-off-by: Sricharan R <r.sricharan@ti.com>
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>

diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 6e8bb861068b8e1779b8065603d4d8c4aebf4b1f..927db1e53fcc9da950961979295f8f26cc8b0b40 100644 (file)
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -184,6 +184,32 @@
                        0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
                >;
        };
+
+       uart1_pins: pinmux_uart1_pins {
+               pinctrl-single,pins = <
+                       0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+                       0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+                       0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+                       0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+               >;
+       };
+
+       uart3_pins: pinmux_uart3_pins {
+               pinctrl-single,pins = <
+                       0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+                       0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+               >;
+       };
+
+       uart5_pins: pinmux_uart5_pins {
+               pinctrl-single,pins = <
+                       0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+                       0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+                       0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+                       0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+               >;
+       };
+
 };
 
 &omap5_pmx_wkup {
@@ -268,3 +294,18 @@
        pinctrl-names = "default";
        pinctrl-0 = <&mcspi4_pins>;
 };
+
+&uart1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart3_pins>;
+};
+
+&uart5 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart5_pins>;
+};