Merge remote-tracking branch 'regmap/topic/core' into regmap-next

diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index c2e00210094995fde1cc69998d03f98e01c75fb1..6a19515f8a458b3719fce7325f265a60a4d147a4 100644 (file)
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1514,21 +1514,49 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
 {
        int ret = 0, i;
        size_t val_bytes = map->format.val_bytes;
-       void *wval;
 
-       if (!map->bus)
-               return -EINVAL;
-       if (!map->format.parse_inplace)
+       if (map->bus && !map->format.parse_inplace)
                return -EINVAL;
        if (reg % map->reg_stride)
                return -EINVAL;
 
        map->lock(map->lock_arg);
+       /*
+        * Some devices don't support bulk write, for
+        * them we have a series of single write operations.
+        */
+       if (!map->bus || map->use_single_rw) {
+               for (i = 0; i < val_count; i++) {
+                       unsigned int ival;
+
+                       switch (val_bytes) {
+                       case 1:
+                               ival = *(u8 *)(val + (i * val_bytes));
+                               break;
+                       case 2:
+                               ival = *(u16 *)(val + (i * val_bytes));
+                               break;
+                       case 4:
+                               ival = *(u32 *)(val + (i * val_bytes));
+                               break;
+#ifdef CONFIG_64BIT
+                       case 8:
+                               ival = *(u64 *)(val + (i * val_bytes));
+                               break;
+#endif
+                       default:
+                               ret = -EINVAL;
+                               goto out;
+                       }
 
-       /* No formatting is require if val_byte is 1 */
-       if (val_bytes == 1) {
-               wval = (void *)val;
+                       ret = _regmap_write(map, reg + (i * map->reg_stride),
+                                       ival);
+                       if (ret != 0)
+                               goto out;
+               }
        } else {
+               void *wval;
+
                wval = kmemdup(val, val_count * val_bytes, GFP_KERNEL);
                if (!wval) {
                        ret = -ENOMEM;
@@ -1537,27 +1565,11 @@ int regmap_bulk_write(struct regmap *map, unsigned int reg, const void *val,
                }
                for (i = 0; i < val_count * val_bytes; i += val_bytes)
                        map->format.parse_inplace(wval + i);
-       }
-       /*
-        * Some devices does not support bulk write, for
-        * them we have a series of single write operations.
-        */
-       if (map->use_single_rw) {
-               for (i = 0; i < val_count; i++) {
-                       ret = _regmap_raw_write(map,
-                                               reg + (i * map->reg_stride),
-                                               val + (i * val_bytes),
-                                               val_bytes);
-                       if (ret != 0)
-                               goto out;
-               }
-       } else {
+
                ret = _regmap_raw_write(map, reg, wval, val_bytes * val_count);
-       }
 
-       if (val_bytes != 1)
                kfree(wval);
-
+       }
 out:
        map->unlock(map->lock_arg);
        return ret;
@@ -1897,14 +1909,10 @@ int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val,
        size_t val_bytes = map->format.val_bytes;
        bool vol = regmap_volatile_range(map, reg, val_count);
 
-       if (!map->bus)
-               return -EINVAL;
-       if (!map->format.parse_inplace)
-               return -EINVAL;
        if (reg % map->reg_stride)
                return -EINVAL;
 
-       if (vol || map->cache_type == REGCACHE_NONE) {
+       if (map->bus && map->format.parse_inplace && (vol || map->cache_type == REGCACHE_NONE)) {
                /*
                 * Some devices does not support bulk read, for
                 * them we have a series of single read operations.
@@ -2173,6 +2181,10 @@ int regmap_register_patch(struct regmap *map, const struct reg_default *regs,
        int i, ret;
        bool bypass;
 
+       if (WARN_ONCE(num_regs <= 0, "invalid registers number (%d)\n",
+           num_regs))
+               return 0;
+
        map->lock(map->lock_arg);
 
        bypass = map->cache_bypass;

diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index e55907804d39c5e6c274151c0a584b8a043eed89..1f6643ce216ab5da5e785f607fce9e597a0272fa 100644 (file)
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -122,9 +122,9 @@ typedef void (*regmap_unlock)(void *);
  *               volatile_table (see below) is not, the check is performed on
  *                such table (a register is volatile if it belongs to one of
  *                the ranges specified by volatile_table).
- * @precious_reg: Optional callback returning true if the rgister
+ * @precious_reg: Optional callback returning true if the register
  *               should not be read outside of a call from the driver
- *               (eg, a clear on read interrupt status register). If this
+ *               (e.g., a clear on read interrupt status register). If this
  *                field is NULL but precious_table (see below) is not, the
  *                check is performed on such table (a register is precious if
  *                it belongs to one of the ranges specified by precious_table).
@@ -136,9 +136,9 @@ typedef void (*regmap_unlock)(void *);
  *               are not overridden).
  * @reg_read:    Optional callback that if filled will be used to perform
  *               all the reads from the registers. Should only be provided for
- *               devices whos read operation cannot be represented as a simple read
- *               operation on a bus such as SPI, I2C, etc. Most of the devices do
- *               not need this.
+ *               devices whose read operation cannot be represented as a simple
+ *               read operation on a bus such as SPI, I2C, etc. Most of the
+ *               devices do not need this.
  * @reg_write:   Same as above for writing.
  * @fast_io:     Register IO is fast. Use a spinlock instead of a mutex
  *               to perform locking. This field is ignored if custom lock/unlock