select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_ZBOOT_UART16550
- select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select GCD
select VLYNQ
help
config MACH_LOONGSON
bool "Loongson family of machines"
- select SYS_SUPPORTS_ZBOOT_UART16550
+ select SYS_SUPPORTS_ZBOOT
help
This enables the support of Loongson family of machines.
select SYS_SUPPORTS_SMP
select NR_CPUS_DEFAULT_16
select WEAK_ORDERING
- select WEAK_REORDERING_BEYOND_LLSC
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
help
config 64BIT_PHYS_ADDR
bool
+config ARCH_PHYS_ADDR_T_64BIT
+ def_bool 64BIT_PHYS_ADDR
+
config CPU_HAS_SMARTMIPS
depends on SYS_SUPPORTS_SMARTMIPS
bool "Support for the SmartMIPS ASE"
arch/mips/include/asm/debug.h for debugging macros.
If unsure, say N.
+config DEBUG_ZBOOT
+ bool "Enable compressed kernel support debugging"
+ depends on DEBUG_KERNEL && SYS_SUPPORTS_ZBOOT
+ default n
+ help
+ If you want to add compressed kernel support to a new board, and the
+ board supports uart16550 compatible serial port, please select
+ SYS_SUPPORTS_ZBOOT_UART16550 for your board and enable this option to
+ debug it.
+
+ If your board doesn't support uart16550 compatible serial port, you
+ can try to select SYS_SUPPORTS_ZBOOT and use the other methods to
+ debug it. for example, add a new serial port support just as
+ arch/mips/boot/compressed/uart-16550.c does.
+
+ After the compressed kernel support works, please disable this option
+ to reduce the kernel image size and speed up the booting procedure a
+ little.
+
+config SPINLOCK_TEST
+ bool "Enable spinlock timing tests in debugfs"
+ depends on DEBUG_FS
+ default n
+ help
+ Add several files to the debugfs to test spinlock speed.
+
endmenu
libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/
libs-y += arch/mips/fw/lib/
+#
+# Kernel compression
+#
+ifdef SYS_SUPPORTS_ZBOOT
+COMPRESSION_FNAME = vmlinuz
+else
+COMPRESSION_FNAME = vmlinux
+endif
+
#
# Board-dependent options and extra files
#
#
# Loongson family
#
-core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/
+core-$(CONFIG_MACH_LOONGSON) += arch/mips/loongson/
cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \
-mno-branch-likely
-load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
-load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000
+load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
+load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
#
# MIPS Malta board
core-$(CONFIG_MIPS_MALTA) += arch/mips/mti-malta/
cflags-$(CONFIG_MIPS_MALTA) += -I$(srctree)/arch/mips/include/asm/mach-malta
load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000
-all-$(CONFIG_MIPS_MALTA) := vmlinuz.bin
+all-$(CONFIG_MIPS_MALTA) := $(COMPRESSION_FNAME).bin
#
# MIPS SIM
else
load-$(CONFIG_SNI_RM) += 0xffffffff80030000
endif
-all-$(CONFIG_SNI_RM) := vmlinuz.ecoff
+all-$(CONFIG_SNI_RM) := $(COMPRESSION_FNAME).ecoff
#
# Common TXx9
-# au1000-style gpio
-config ALCHEMY_GPIO_AU1000
+# au1000-style gpio and interrupt controllers
+config ALCHEMY_GPIOINT_AU1000
bool
# select this in your board config if you don't want to use the gpio
select HW_HAS_PCI
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_BOSPORUS
bool "Alchemy Bosporus board"
select SOC_AU1500
select DMA_NONCOHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_DB1000
bool "Alchemy DB1000 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_DB1100
bool "Alchemy DB1100 board"
select SOC_AU1100
select DMA_NONCOHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_DB1200
bool "Alchemy DB1200 board"
select DMA_COHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_DB1500
bool "Alchemy DB1500 board"
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_DB1550
bool "Alchemy DB1550 board"
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_MIRAGE
bool "Alchemy Mirage board"
select DMA_NONCOHERENT
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_PB1000
bool "Alchemy PB1000 board"
select HW_HAS_PCI
select SWAP_IO_SPACE
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_PB1100
bool "Alchemy PB1100 board"
select HW_HAS_PCI
select SWAP_IO_SPACE
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_PB1200
bool "Alchemy PB1200 board"
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_PB1500
bool "Alchemy PB1500 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_PB1550
bool "Alchemy PB1550 board"
select HW_HAS_PCI
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
config MIPS_XXS1500
bool "MyCable XXS1500 board"
select DMA_NONCOHERENT
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_EARLY_PRINTK
endchoice
config SOC_AU1000
bool
select SOC_AU1X00
- select ALCHEMY_GPIO_AU1000
+ select ALCHEMY_GPIOINT_AU1000
config SOC_AU1100
bool
select SOC_AU1X00
- select ALCHEMY_GPIO_AU1000
+ select ALCHEMY_GPIOINT_AU1000
config SOC_AU1500
bool
select SOC_AU1X00
- select ALCHEMY_GPIO_AU1000
+ select ALCHEMY_GPIOINT_AU1000
config SOC_AU1550
bool
select SOC_AU1X00
- select ALCHEMY_GPIO_AU1000
+ select ALCHEMY_GPIOINT_AU1000
config SOC_AU1200
bool
select SOC_AU1X00
- select ALCHEMY_GPIO_AU1000
+ select ALCHEMY_GPIOINT_AU1000
config SOC_AU1X00
bool
# Makefile for the Alchemy Au1xx0 CPUs, generic files.
#
-obj-y += prom.o irq.o puts.o time.o reset.o \
- clocks.o platform.o power.o setup.o \
+obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
sleeper.o dma.o dbdma.o
+obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
+
# optional gpiolib support
ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
ifeq ($(CONFIG_GPIOLIB),y)
- obj-$(CONFIG_ALCHEMY_GPIO_AU1000) += gpiolib-au1000.o
+ obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o
endif
endif
static unsigned int au1x00_clock; /* Hz */
static unsigned long uart_baud_base;
-static DEFINE_SPINLOCK(time_lock);
-
/*
* Set the au1000_clock
*/
unsigned long au1xxx_calc_clock(void)
{
unsigned long cpu_speed;
- unsigned long flags;
-
- spin_lock_irqsave(&time_lock, flags);
/*
* On early Au1000, sys_cpupll was write-only. Since these
set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
& 0x03) + 2) * 16));
- spin_unlock_irqrestore(&time_lock, flags);
-
set_au1x00_speed(cpu_speed);
return cpu_speed;
*
*/
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
static int dbdma_initialized;
-static void au1xxx_dbdma_init(void);
static dbdev_tab_t dbdev_tab[] = {
#ifdef CONFIG_SOC_AU1550
void (*callback)(int, void *), void *callparam)
{
unsigned long flags;
- u32 used, chan, rv;
+ u32 used, chan;
u32 dcp;
int i;
dbdev_tab_t *stp, *dtp;
* which can't be done successfully during board set up.
*/
if (!dbdma_initialized)
- au1xxx_dbdma_init();
- dbdma_initialized = 1;
+ return 0;
stp = find_dbdev_id(srcid);
if (stp == NULL)
return 0;
used = 0;
- rv = 0;
/* Check to see if we can get both channels. */
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
used++;
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
- if (!used) {
- /* Let's see if we can allocate a channel for it. */
- ctp = NULL;
- chan = 0;
- spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
- for (i = 0; i < NUM_DBDMA_CHANS; i++)
- if (chan_tab_ptr[i] == NULL) {
- /*
- * If kmalloc fails, it is caught below same
- * as a channel not available.
- */
- ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
- chan_tab_ptr[i] = ctp;
- break;
- }
- spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
-
- if (ctp != NULL) {
- memset(ctp, 0, sizeof(chan_tab_t));
- ctp->chan_index = chan = i;
- dcp = DDMA_CHANNEL_BASE;
- dcp += (0x0100 * chan);
- ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
- cp = (au1x_dma_chan_t *)dcp;
- ctp->chan_src = stp;
- ctp->chan_dest = dtp;
- ctp->chan_callback = callback;
- ctp->chan_callparam = callparam;
-
- /* Initialize channel configuration. */
- i = 0;
- if (stp->dev_intlevel)
- i |= DDMA_CFG_SED;
- if (stp->dev_intpolarity)
- i |= DDMA_CFG_SP;
- if (dtp->dev_intlevel)
- i |= DDMA_CFG_DED;
- if (dtp->dev_intpolarity)
- i |= DDMA_CFG_DP;
- if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
- (dtp->dev_flags & DEV_FLAGS_SYNC))
- i |= DDMA_CFG_SYNC;
- cp->ddma_cfg = i;
- au_sync();
+ if (used)
+ return 0;
- /* Return a non-zero value that can be used to
- * find the channel information in subsequent
- * operations.
+ /* Let's see if we can allocate a channel for it. */
+ ctp = NULL;
+ chan = 0;
+ spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
+ for (i = 0; i < NUM_DBDMA_CHANS; i++)
+ if (chan_tab_ptr[i] == NULL) {
+ /*
+ * If kmalloc fails, it is caught below same
+ * as a channel not available.
*/
- rv = (u32)(&chan_tab_ptr[chan]);
- } else {
- /* Release devices */
- stp->dev_flags &= ~DEV_FLAGS_INUSE;
- dtp->dev_flags &= ~DEV_FLAGS_INUSE;
+ ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
+ chan_tab_ptr[i] = ctp;
+ break;
}
+ spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
+
+ if (ctp != NULL) {
+ memset(ctp, 0, sizeof(chan_tab_t));
+ ctp->chan_index = chan = i;
+ dcp = DDMA_CHANNEL_BASE;
+ dcp += (0x0100 * chan);
+ ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
+ cp = (au1x_dma_chan_t *)dcp;
+ ctp->chan_src = stp;
+ ctp->chan_dest = dtp;
+ ctp->chan_callback = callback;
+ ctp->chan_callparam = callparam;
+
+ /* Initialize channel configuration. */
+ i = 0;
+ if (stp->dev_intlevel)
+ i |= DDMA_CFG_SED;
+ if (stp->dev_intpolarity)
+ i |= DDMA_CFG_SP;
+ if (dtp->dev_intlevel)
+ i |= DDMA_CFG_DED;
+ if (dtp->dev_intpolarity)
+ i |= DDMA_CFG_DP;
+ if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
+ (dtp->dev_flags & DEV_FLAGS_SYNC))
+ i |= DDMA_CFG_SYNC;
+ cp->ddma_cfg = i;
+ au_sync();
+
+ /*
+ * Return a non-zero value that can be used to find the channel
+ * information in subsequent operations.
+ */
+ return (u32)(&chan_tab_ptr[chan]);
}
- return rv;
+
+ /* Release devices */
+ stp->dev_flags &= ~DEV_FLAGS_INUSE;
+ dtp->dev_flags &= ~DEV_FLAGS_INUSE;
+
+ return 0;
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
* This updates the source pointer and byte count. Normally used
* for memory to fifo transfers.
*/
-u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
return 0;
/* Load up buffer address and byte count. */
- dp->dscr_source0 = virt_to_phys(buf);
+ dp->dscr_source0 = buf & ~0UL;
dp->dscr_cmd1 = nbytes;
/* Check flags */
if (flags & DDMA_FLAGS_IE)
/* Return something non-zero. */
return nbytes;
}
-EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
+EXPORT_SYMBOL(au1xxx_dbdma_put_source);
/* Put a destination buffer into the DMA ring.
* This updates the destination pointer and byte count. Normally used
* to place an empty buffer into the ring for fifo to memory transfers.
*/
-u32
-_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
if (flags & DDMA_FLAGS_NOIE)
dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
- dp->dscr_dest0 = virt_to_phys(buf);
+ dp->dscr_dest0 = buf & ~0UL;
dp->dscr_cmd1 = nbytes;
#if 0
printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
/* Return something non-zero. */
return nbytes;
}
-EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
+EXPORT_SYMBOL(au1xxx_dbdma_put_dest);
/*
* Get a destination buffer into the DMA ring.
return IRQ_RETVAL(1);
}
-static void au1xxx_dbdma_init(void)
-{
- int irq_nr;
-
- dbdma_gptr->ddma_config = 0;
- dbdma_gptr->ddma_throttle = 0;
- dbdma_gptr->ddma_inten = 0xffff;
- au_sync();
-
-#if defined(CONFIG_SOC_AU1550)
- irq_nr = AU1550_DDMA_INT;
-#elif defined(CONFIG_SOC_AU1200)
- irq_nr = AU1200_DDMA_INT;
-#else
- #error Unknown Au1x00 SOC
-#endif
-
- if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
- "Au1xxx dbdma", (void *)dbdma_gptr))
- printk(KERN_ERR "Can't get 1550 dbdma irq");
-}
-
void au1xxx_dbdma_dump(u32 chanid)
{
chan_tab_t *ctp;
dtp = ctp->chan_dest;
cp = ctp->chan_ptr;
- printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n",
+ printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n",
(u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
dtp - dbdev_tab);
printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
}
}
#endif /* CONFIG_PM */
+
+static int __init au1xxx_dbdma_init(void)
+{
+ int irq_nr, ret;
+
+ dbdma_gptr->ddma_config = 0;
+ dbdma_gptr->ddma_throttle = 0;
+ dbdma_gptr->ddma_inten = 0xffff;
+ au_sync();
+
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1550:
+ irq_nr = AU1550_DDMA_INT;
+ break;
+ case ALCHEMY_CPU_AU1200:
+ irq_nr = AU1200_DDMA_INT;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
+ "Au1xxx dbdma", (void *)dbdma_gptr);
+ if (ret)
+ printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
+ else {
+ dbdma_initialized = 1;
+ printk(KERN_INFO "Alchemy DBDMA initialized\n");
+ }
+
+ return ret;
+}
+subsys_initcall(au1xxx_dbdma_init);
+
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
+
+#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
dev = &dma_dev_table[dev_id];
if (irqhandler) {
- chan->irq = AU1000_DMA_INT_BASE + i;
chan->irq_dev = irq_dev_id;
ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
chan->irq_dev);
if (ret) {
- chan->irq = 0;
chan->irq_dev = NULL;
return ret;
}
} else {
- chan->irq = 0;
chan->irq_dev = NULL;
}
}
disable_dma(dmanr);
- if (chan->irq)
+ if (chan->irq_dev)
free_irq(chan->irq, chan->irq_dev);
- chan->irq = 0;
chan->irq_dev = NULL;
chan->dev_id = -1;
}
EXPORT_SYMBOL(free_au1000_dma);
+static int __init au1000_dma_init(void)
+{
+ int base, i;
+
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ base = AU1000_DMA_INT_BASE;
+ break;
+ case ALCHEMY_CPU_AU1500:
+ base = AU1500_DMA_INT_BASE;
+ break;
+ case ALCHEMY_CPU_AU1100:
+ base = AU1100_DMA_INT_BASE;
+ break;
+ default:
+ goto out;
+ }
+
+ for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
+ au1000_dma_table[i].irq = base + i;
+
+ printk(KERN_INFO "Alchemy DMA initialized\n");
+
+out:
+ return 0;
+}
+arch_initcall(au1000_dma_init);
+
#endif /* AU1000 AU1500 AU1100 */
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/gpio.h>
-#if !defined(CONFIG_SOC_AU1000)
static int gpio2_get(struct gpio_chip *chip, unsigned offset)
{
return alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
{
return alchemy_gpio2_to_irq(offset + ALCHEMY_GPIO2_BASE);
}
-#endif /* !defined(CONFIG_SOC_AU1000) */
+
static int gpio1_get(struct gpio_chip *chip, unsigned offset)
{
.base = ALCHEMY_GPIO1_BASE,
.ngpio = ALCHEMY_GPIO1_NUM,
},
-#if !defined(CONFIG_SOC_AU1000)
[1] = {
.label = "alchemy-gpio2",
.direction_input = gpio2_direction_input,
.base = ALCHEMY_GPIO2_BASE,
.ngpio = ALCHEMY_GPIO2_NUM,
},
-#endif
};
static int __init alchemy_gpiolib_init(void)
{
gpiochip_add(&alchemy_gpio_chip[0]);
-#if !defined(CONFIG_SOC_AU1000)
- gpiochip_add(&alchemy_gpio_chip[1]);
-#endif
+ if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000)
+ gpiochip_add(&alchemy_gpio_chip[1]);
return 0;
}
static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
+/* NOTE on interrupt priorities: The original writers of this code said:
+ *
+ * Because of the tight timing of SETUP token to reply transactions,
+ * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
+ * needs the highest priority.
+ */
+
/* per-processor fixed function irqs */
-struct au1xxx_irqmap au1xxx_ic0_map[] __initdata = {
-
-#if defined(CONFIG_SOC_AU1000)
- { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
- { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
-
-#elif defined(CONFIG_SOC_AU1500)
-
- { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1000_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1000_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
- { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
-
-#elif defined(CONFIG_SOC_AU1100)
-
- { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
- { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+struct au1xxx_irqmap {
+ int im_irq;
+ int im_type;
+ int im_request; /* set 1 to get higher priority */
+};
+
+struct au1xxx_irqmap au1000_irqmap[] __initdata = {
+ { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
-
-#elif defined(CONFIG_SOC_AU1550)
-
- { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
- { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { -1, },
+};
+
+struct au1xxx_irqmap au1500_irqmap[] __initdata = {
+ { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
+ { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { -1, },
+};
+
+struct au1xxx_irqmap au1100_irqmap[] __initdata = {
+ { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
+ { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { -1, },
+};
+
+struct au1xxx_irqmap au1550_irqmap[] __initdata = {
+ { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
- { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-
-#elif defined(CONFIG_SOC_AU1200)
-
- { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
- { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
- { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
- { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-
-#else
-#error "Error: Unknown Alchemy SOC"
-#endif
+ { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+ { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { -1, },
+};
+
+struct au1xxx_irqmap au1200_irqmap[] __initdata = {
+ { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+ { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
+ { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+ { -1, },
};
* nowhere in the current kernel sources is it disabled. --mlau
*/
#if defined(CONFIG_MIPS_PB1000)
- if (irq_nr == AU1000_GPIO_15)
+ if (irq_nr == AU1000_GPIO15_INT)
au_writel(0x4000, PB1000_MDR); /* enable int */
#endif
au_sync();
static int au1x_ic1_setwake(unsigned int irq, unsigned int on)
{
- unsigned int bit = irq - AU1000_INTC1_INT_BASE;
+ int bit = irq - AU1000_INTC1_INT_BASE;
unsigned long wakemsk, flags;
- /* only GPIO 0-7 can act as wakeup source: */
- if ((irq < AU1000_GPIO_0) || (irq > AU1000_GPIO_7))
+ /* only GPIO 0-7 can act as wakeup source. Fortunately these
+ * are wired up identically on all supported variants.
+ */
+ if ((bit < 0) || (bit > 7))
return -EINVAL;
local_irq_save(flags);
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause();
- unsigned long s, off, bit;
+ unsigned long s, off;
if (pending & CAUSEF_IP7) {
- do_IRQ(MIPS_CPU_IRQ_BASE + 7);
- return;
+ off = MIPS_CPU_IRQ_BASE + 7;
+ goto handle;
} else if (pending & CAUSEF_IP2) {
s = IC0_REQ0INT;
off = AU1000_INTC0_INT_BASE;
} else
goto spurious;
- bit = 0;
s = au_readl(s);
if (unlikely(!s)) {
spurious:
spurious_interrupt();
return;
}
-#ifdef AU1000_USB_DEV_REQ_INT
- /*
- * Because of the tight timing of SETUP token to reply
- * transactions, the USB devices-side packet complete
- * interrupt needs the highest priority.
- */
- bit = 1 << (AU1000_USB_DEV_REQ_INT - AU1000_INTC0_INT_BASE);
- if ((pending & CAUSEF_IP2) && (s & bit)) {
- do_IRQ(AU1000_USB_DEV_REQ_INT);
- return;
- }
-#endif
- do_IRQ(__ffs(s) + off);
+ off += __ffs(s);
+handle:
+ do_IRQ(off);
}
-/* setup edge/level and assign request 0/1 */
-void __init au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count)
+static void __init au1000_init_irq(struct au1xxx_irqmap *map)
{
unsigned int bit, irq_nr;
-
- while (count--) {
- irq_nr = map[count].im_irq;
-
- if (((irq_nr < AU1000_INTC0_INT_BASE) ||
- (irq_nr >= AU1000_INTC0_INT_BASE + 32)) &&
- ((irq_nr < AU1000_INTC1_INT_BASE) ||
- (irq_nr >= AU1000_INTC1_INT_BASE + 32)))
- continue;
-
- if (irq_nr >= AU1000_INTC1_INT_BASE) {
- bit = irq_nr - AU1000_INTC1_INT_BASE;
- if (map[count].im_request)
- au_writel(1 << bit, IC1_ASSIGNCLR);
- } else {
- bit = irq_nr - AU1000_INTC0_INT_BASE;
- if (map[count].im_request)
- au_writel(1 << bit, IC0_ASSIGNCLR);
- }
-
- au1x_ic_settype(irq_nr, map[count].im_type);
- }
-}
-
-void __init arch_init_irq(void)
-{
int i;
/*
au_writel(0xffffffff, IC0_CFG1CLR);
au_writel(0xffffffff, IC0_CFG2CLR);
au_writel(0xffffffff, IC0_MASKCLR);
- au_writel(0xffffffff, IC0_ASSIGNSET);
+ au_writel(0xffffffff, IC0_ASSIGNCLR);
au_writel(0xffffffff, IC0_WAKECLR);
au_writel(0xffffffff, IC0_SRCSET);
au_writel(0xffffffff, IC0_FALLINGCLR);
au_writel(0xffffffff, IC1_CFG1CLR);
au_writel(0xffffffff, IC1_CFG2CLR);
au_writel(0xffffffff, IC1_MASKCLR);
- au_writel(0xffffffff, IC1_ASSIGNSET);
+ au_writel(0xffffffff, IC1_ASSIGNCLR);
au_writel(0xffffffff, IC1_WAKECLR);
au_writel(0xffffffff, IC1_SRCSET);
au_writel(0xffffffff, IC1_FALLINGCLR);
/*
* Initialize IC0, which is fixed per processor.
*/
- au1xxx_setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map));
+ while (map->im_irq != -1) {
+ irq_nr = map->im_irq;
- /* Boards can register additional (GPIO-based) IRQs.
- */
- board_init_irq();
+ if (irq_nr >= AU1000_INTC1_INT_BASE) {
+ bit = irq_nr - AU1000_INTC1_INT_BASE;
+ if (map->im_request)
+ au_writel(1 << bit, IC1_ASSIGNSET);
+ } else {
+ bit = irq_nr - AU1000_INTC0_INT_BASE;
+ if (map->im_request)
+ au_writel(1 << bit, IC0_ASSIGNSET);
+ }
+
+ au1x_ic_settype(irq_nr, map->im_type);
+ ++map;
+ }
set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
}
+
+void __init arch_init_irq(void)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ au1000_init_irq(au1000_irqmap);
+ break;
+ case ALCHEMY_CPU_AU1500:
+ au1000_init_irq(au1500_irqmap);
+ break;
+ case ALCHEMY_CPU_AU1100:
+ au1000_init_irq(au1100_irqmap);
+ break;
+ case ALCHEMY_CPU_AU1550:
+ au1000_init_irq(au1550_irqmap);
+ break;
+ case ALCHEMY_CPU_AU1200:
+ au1000_init_irq(au1200_irqmap);
+ break;
+ }
+}
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1100_mmc.h>
-
-#define PORT(_base, _irq) \
- { \
- .iobase = _base, \
- .membase = (void __iomem *)_base,\
- .mapbase = CPHYSADDR(_base), \
- .irq = _irq, \
- .regshift = 2, \
- .iotype = UPIO_AU, \
- .flags = UPF_SKIP_TEST \
+#include <asm/mach-au1x00/au1xxx_eth.h>
+
+#define PORT(_base, _irq) \
+ { \
+ .mapbase = _base, \
+ .irq = _irq, \
+ .regshift = 2, \
+ .iotype = UPIO_AU, \
+ .flags = UPF_SKIP_TEST | UPF_IOREMAP | \
+ UPF_FIXED_TYPE, \
+ .type = PORT_16550A, \
}
static struct plat_serial8250_port au1x00_uart_data[] = {
#if defined(CONFIG_SERIAL_8250_AU1X00)
#if defined(CONFIG_SOC_AU1000)
- PORT(UART0_ADDR, AU1000_UART0_INT),
- PORT(UART1_ADDR, AU1000_UART1_INT),
- PORT(UART2_ADDR, AU1000_UART2_INT),
- PORT(UART3_ADDR, AU1000_UART3_INT),
+ PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
+ PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
+ PORT(UART2_PHYS_ADDR, AU1000_UART2_INT),
+ PORT(UART3_PHYS_ADDR, AU1000_UART3_INT),
#elif defined(CONFIG_SOC_AU1500)
- PORT(UART0_ADDR, AU1500_UART0_INT),
- PORT(UART3_ADDR, AU1500_UART3_INT),
+ PORT(UART0_PHYS_ADDR, AU1500_UART0_INT),
+ PORT(UART3_PHYS_ADDR, AU1500_UART3_INT),
#elif defined(CONFIG_SOC_AU1100)
- PORT(UART0_ADDR, AU1100_UART0_INT),
- PORT(UART1_ADDR, AU1100_UART1_INT),
- PORT(UART3_ADDR, AU1100_UART3_INT),
+ PORT(UART0_PHYS_ADDR, AU1100_UART0_INT),
+ PORT(UART1_PHYS_ADDR, AU1100_UART1_INT),
+ PORT(UART3_PHYS_ADDR, AU1100_UART3_INT),
#elif defined(CONFIG_SOC_AU1550)
- PORT(UART0_ADDR, AU1550_UART0_INT),
- PORT(UART1_ADDR, AU1550_UART1_INT),
- PORT(UART3_ADDR, AU1550_UART3_INT),
+ PORT(UART0_PHYS_ADDR, AU1550_UART0_INT),
+ PORT(UART1_PHYS_ADDR, AU1550_UART1_INT),
+ PORT(UART3_PHYS_ADDR, AU1550_UART3_INT),
#elif defined(CONFIG_SOC_AU1200)
- PORT(UART0_ADDR, AU1200_UART0_INT),
- PORT(UART1_ADDR, AU1200_UART1_INT),
+ PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
+ PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
#endif
#endif /* CONFIG_SERIAL_8250_AU1X00 */
{ },
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AU1000_USB_HOST_INT,
- .end = AU1000_USB_HOST_INT,
+ .start = FOR_PLATFORM_C_USB_HOST_INT,
+ .end = FOR_PLATFORM_C_USB_HOST_INT,
.flags = IORESOURCE_IRQ,
},
};
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AU1000_USB_HOST_INT,
- .end = AU1000_USB_HOST_INT,
+ .start = AU1200_USB_INT,
+ .end = AU1200_USB_INT,
.flags = IORESOURCE_IRQ,
},
};
#endif /* #ifndef CONFIG_MIPS_DB1200 */
#endif /* #ifdef CONFIG_SOC_AU1200 */
-static struct platform_device au1x00_pcmcia_device = {
- .name = "au1x00-pcmcia",
- .id = 0,
-};
-
/* All Alchemy demoboards with I2C have this #define in their headers */
#ifdef SMBUS_PSC_BASE
static struct resource pbdb_smbus_resources[] = {
};
#endif
+/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES(_base, _enable, _irq) \
+ { \
+ .start = CPHYSADDR(_base), \
+ .end = CPHYSADDR(_base + 0xffff), \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = CPHYSADDR(_enable), \
+ .end = CPHYSADDR(_enable + 0x3), \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = _irq, \
+ .end = _irq, \
+ .flags = IORESOURCE_IRQ \
+ }
+
+static struct resource au1xxx_eth0_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+ MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1100)
+ MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+ MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+ MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
+#endif
+};
+
+
+static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
+ .phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth0_device = {
+ .name = "au1000-eth",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(au1xxx_eth0_resources),
+ .resource = au1xxx_eth0_resources,
+ .dev.platform_data = &au1xxx_eth0_platform_data,
+};
+
+#ifndef CONFIG_SOC_AU1100
+static struct resource au1xxx_eth1_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+ MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+ MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+ MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
+#endif
+};
+
+static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
+ .phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth1_device = {
+ .name = "au1000-eth",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(au1xxx_eth1_resources),
+ .resource = au1xxx_eth1_resources,
+ .dev.platform_data = &au1xxx_eth1_platform_data,
+};
+#endif
+
+void __init au1xxx_override_eth_cfg(unsigned int port,
+ struct au1000_eth_platform_data *eth_data)
+{
+ if (!eth_data || port > 1)
+ return;
+
+ if (port == 0)
+ memcpy(&au1xxx_eth0_platform_data, eth_data,
+ sizeof(struct au1000_eth_platform_data));
+#ifndef CONFIG_SOC_AU1100
+ else
+ memcpy(&au1xxx_eth1_platform_data, eth_data,
+ sizeof(struct au1000_eth_platform_data));
+#endif
+}
+
static struct platform_device *au1xxx_platform_devices[] __initdata = {
&au1xx0_uart_device,
&au1xxx_usb_ohci_device,
- &au1x00_pcmcia_device,
#ifdef CONFIG_FB_AU1100
&au1100_lcd_device,
#endif
#ifdef SMBUS_PSC_BASE
&pbdb_smbus_device,
#endif
+ &au1xxx_eth0_device,
};
static int __init au1xxx_platform_init(void)
for (i = 0; au1x00_uart_data[i].flags; i++)
au1x00_uart_data[i].uartclk = uartclk;
+#ifndef CONFIG_SOC_AU1100
+ /* Register second MAC if enabled in pinfunc */
+ if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
+ platform_device_register(&au1xxx_eth1_device);
+#endif
+
return platform_add_devices(au1xxx_platform_devices,
ARRAY_SIZE(au1xxx_platform_devices));
}
char **prom_argv;
char **prom_envp;
-char * __init_or_module prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-
void prom_init_cmdline(void)
{
- char *cp;
- int actr;
-
- actr = 1; /* Always ignore argv[0] */
+ int i;
- cp = &(arcs_cmdline[0]);
- while (actr < prom_argc) {
- strcpy(cp, prom_argv[actr]);
- cp += strlen(prom_argv[actr]);
- *cp++ = ' ';
- actr++;
+ for (i = 1; i < prom_argc; i++) {
+ strlcat(arcs_cmdline, prom_argv[i], COMMAND_LINE_SIZE);
+ if (i < (prom_argc - 1))
+ strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
}
- if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
- --cp;
- if (prom_argc > 1)
- *cp = '\0';
}
char *prom_getenv(char *envname)
int prom_get_ethernet_addr(char *ethernet_addr)
{
char *ethaddr_str;
- char *argptr;
/* Check the environment variables first */
ethaddr_str = prom_getenv("ethaddr");
if (!ethaddr_str) {
/* Check command line */
- argptr = prom_getcmdline();
- ethaddr_str = strstr(argptr, "ethaddr=");
+ ethaddr_str = strstr(arcs_cmdline, "ethaddr=");
if (!ethaddr_str)
return -1;
+++ /dev/null
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Low level UART routines to directly access Alchemy UART.
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/mach-au1x00/au1000.h>
-
-#define SERIAL_BASE UART_BASE
-#define SER_CMD 0x7
-#define SER_DATA 0x1
-#define TX_BUSY 0x20
-
-#define TIMEOUT 0xffffff
-#define SLOW_DOWN
-
-static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
-
-#ifdef SLOW_DOWN
-static inline void slow_down(void)
-{
- int k;
-
- for (k = 0; k < 10000; k++);
-}
-#else
-#define slow_down()
-#endif
-
-void
-prom_putchar(const unsigned char c)
-{
- unsigned char ch;
- int i = 0;
-
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i > TIMEOUT)
- break;
- } while (0 == (ch & TX_BUSY));
-
- com1[SER_DATA] = c;
-}
+++ /dev/null
-/*
- *
- * BRIEF MODULE DESCRIPTION
- * Au1xx0 reset routines.
- *
- * Copyright 2001, 2006, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/cacheflush.h>
-#include <asm/mach-au1x00/au1000.h>
-
-void au1000_restart(char *command)
-{
- /* Set all integrated peripherals to disabled states */
- extern void board_reset(void);
- u32 prid = read_c0_prid();
-
- printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
-
- switch (prid & 0xFF000000) {
- case 0x00000000: /* Au1000 */
- au_writel(0x02, 0xb0000010); /* ac97_enable */
- au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
- asm("sync");
- au_writel(0x00, 0xb017fffc); /* usbh_enable */
- au_writel(0x00, 0xb0200058); /* usbd_enable */
- au_writel(0x00, 0xb0300040); /* ir_enable */
- au_writel(0x00, 0xb4004104); /* mac dma */
- au_writel(0x00, 0xb4004114); /* mac dma */
- au_writel(0x00, 0xb4004124); /* mac dma */
- au_writel(0x00, 0xb4004134); /* mac dma */
- au_writel(0x00, 0xb0520000); /* macen0 */
- au_writel(0x00, 0xb0520004); /* macen1 */
- au_writel(0x00, 0xb1000008); /* i2s_enable */
- au_writel(0x00, 0xb1100100); /* uart0_enable */
- au_writel(0x00, 0xb1200100); /* uart1_enable */
- au_writel(0x00, 0xb1300100); /* uart2_enable */
- au_writel(0x00, 0xb1400100); /* uart3_enable */
- au_writel(0x02, 0xb1600100); /* ssi0_enable */
- au_writel(0x02, 0xb1680100); /* ssi1_enable */
- au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
- au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
- au_writel(0x00, 0xb1900028); /* sys_clksrc */
- au_writel(0x10, 0xb1900060); /* sys_cpupll */
- au_writel(0x00, 0xb1900064); /* sys_auxpll */
- au_writel(0x00, 0xb1900100); /* sys_pininputen */
- break;
- case 0x01000000: /* Au1500 */
- au_writel(0x02, 0xb0000010); /* ac97_enable */
- au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
- asm("sync");
- au_writel(0x00, 0xb017fffc); /* usbh_enable */
- au_writel(0x00, 0xb0200058); /* usbd_enable */
- au_writel(0x00, 0xb4004104); /* mac dma */
- au_writel(0x00, 0xb4004114); /* mac dma */
- au_writel(0x00, 0xb4004124); /* mac dma */
- au_writel(0x00, 0xb4004134); /* mac dma */
- au_writel(0x00, 0xb1520000); /* macen0 */
- au_writel(0x00, 0xb1520004); /* macen1 */
- au_writel(0x00, 0xb1100100); /* uart0_enable */
- au_writel(0x00, 0xb1400100); /* uart3_enable */
- au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
- au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
- au_writel(0x00, 0xb1900028); /* sys_clksrc */
- au_writel(0x10, 0xb1900060); /* sys_cpupll */
- au_writel(0x00, 0xb1900064); /* sys_auxpll */
- au_writel(0x00, 0xb1900100); /* sys_pininputen */
- break;
- case 0x02000000: /* Au1100 */
- au_writel(0x02, 0xb0000010); /* ac97_enable */
- au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
- asm("sync");
- au_writel(0x00, 0xb017fffc); /* usbh_enable */
- au_writel(0x00, 0xb0200058); /* usbd_enable */
- au_writel(0x00, 0xb0300040); /* ir_enable */
- au_writel(0x00, 0xb4004104); /* mac dma */
- au_writel(0x00, 0xb4004114); /* mac dma */
- au_writel(0x00, 0xb4004124); /* mac dma */
- au_writel(0x00, 0xb4004134); /* mac dma */
- au_writel(0x00, 0xb0520000); /* macen0 */
- au_writel(0x00, 0xb1000008); /* i2s_enable */
- au_writel(0x00, 0xb1100100); /* uart0_enable */
- au_writel(0x00, 0xb1200100); /* uart1_enable */
- au_writel(0x00, 0xb1400100); /* uart3_enable */
- au_writel(0x02, 0xb1600100); /* ssi0_enable */
- au_writel(0x02, 0xb1680100); /* ssi1_enable */
- au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
- au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
- au_writel(0x00, 0xb1900028); /* sys_clksrc */
- au_writel(0x10, 0xb1900060); /* sys_cpupll */
- au_writel(0x00, 0xb1900064); /* sys_auxpll */
- au_writel(0x00, 0xb1900100); /* sys_pininputen */
- break;
- case 0x03000000: /* Au1550 */
- au_writel(0x00, 0xb1a00004); /* psc 0 */
- au_writel(0x00, 0xb1b00004); /* psc 1 */
- au_writel(0x00, 0xb0a00004); /* psc 2 */
- au_writel(0x00, 0xb0b00004); /* psc 3 */
- au_writel(0x00, 0xb017fffc); /* usbh_enable */
- au_writel(0x00, 0xb0200058); /* usbd_enable */
- au_writel(0x00, 0xb4004104); /* mac dma */
- au_writel(0x00, 0xb4004114); /* mac dma */
- au_writel(0x00, 0xb4004124); /* mac dma */
- au_writel(0x00, 0xb4004134); /* mac dma */
- au_writel(0x00, 0xb1520000); /* macen0 */
- au_writel(0x00, 0xb1520004); /* macen1 */
- au_writel(0x00, 0xb1100100); /* uart0_enable */
- au_writel(0x00, 0xb1200100); /* uart1_enable */
- au_writel(0x00, 0xb1400100); /* uart3_enable */
- au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
- au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
- au_writel(0x00, 0xb1900028); /* sys_clksrc */
- au_writel(0x10, 0xb1900060); /* sys_cpupll */
- au_writel(0x00, 0xb1900064); /* sys_auxpll */
- au_writel(0x00, 0xb1900100); /* sys_pininputen */
- break;
- }
-
- set_c0_status(ST0_BEV | ST0_ERL);
- change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
- flush_cache_all();
- write_c0_wired(0);
-
- /* Give board a chance to do a hardware reset */
- board_reset();
-
- /* Jump to the beggining in case board_reset() is empty */
- __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void au1000_halt(void)
-{
-#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
- /* Power off system */
- printk(KERN_NOTICE "\n** Powering off...\n");
- au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
- au_sync();
- while (1); /* should not get here */
-#else
- printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-#ifdef CONFIG_MIPS_MIRAGE
- gpio_direction_output(210, 1);
-#endif
-#ifdef CONFIG_MIPS_DB1200
- au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
-#endif
-#ifdef CONFIG_PM
- au_sleep();
-
- /* Should not get here */
- printk(KERN_ERR "Unable to put CPU in sleep mode\n");
- while (1);
-#else
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-#endif
-#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
-}
-
-void au1000_power_off(void)
-{
- au1000_halt();
-}
#include <linux/ioport.h>
#include <linux/jiffies.h>
#include <linux/module.h>
-#include <linux/pm.h>
#include <asm/mipsregs.h>
-#include <asm/reboot.h>
#include <asm/time.h>
#include <au1000.h>
extern void __init board_setup(void);
-extern void au1000_restart(char *);
-extern void au1000_halt(void);
-extern void au1000_power_off(void);
extern void set_cpuspec(void);
void __init plat_mem_setup(void)
/* this is faster than wasting cycles trying to approximate it */
preset_lpj = (est_freq >> 1) / HZ;
- _machine_restart = au1000_restart;
- _machine_halt = au1000_halt;
- pm_power_off = au1000_power_off;
-
board_setup(); /* board specific setup */
if (au1xxx_cpu_needs_config_od())
iomem_resource.end = IOMEM_RESOURCE_END;
}
-#if defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI)
/* This routine should be valid for all Au1x based boards */
phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
+ u32 start = (u32)Au1500_PCI_MEM_START;
+ u32 end = (u32)Au1500_PCI_MEM_END;
+
/* Don't fixup 36-bit addresses */
if ((phys_addr >> 32) != 0)
return phys_addr;
-#ifdef CONFIG_PCI
- {
- u32 start = (u32)Au1500_PCI_MEM_START;
- u32 end = (u32)Au1500_PCI_MEM_END;
-
- /* Check for PCI memory window */
- if (phys_addr >= start && (phys_addr + size - 1) <= end)
- return (phys_t)
- ((phys_addr - start) + Au1500_PCI_MEM_START);
- }
-#endif
-
- /*
- * All Au1xx0 SOCs have a PCMCIA controller.
- * We setup our 32-bit pseudo addresses to be equal to the
- * 36-bit addr >> 4, to make it easier to check the address
- * and fix it.
- * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
- * The pseudo address we use is 0xF400 0000. Any address over
- * 0xF400 0000 is a PCMCIA pseudo address.
- */
- if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
- return (phys_t)(phys_addr << 4);
+ /* Check for PCI memory window */
+ if (phys_addr >= start && (phys_addr + size - 1) <= end)
+ return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START);
/* default nop */
return phys_addr;
/*
- * Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
+ * Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com>
*
* Previous incarnations were:
* Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
.name = "rtcmatch2",
.features = CLOCK_EVT_FEAT_ONESHOT,
.rating = 100,
- .irq = AU1000_RTC_MATCH2_INT,
.set_next_event = au1x_rtcmatch2_set_next_event,
.set_mode = au1x_rtcmatch2_set_mode,
.cpumask = cpu_all_mask,
.dev_id = &au1x_rtcmatch2_clockdev,
};
-void __init plat_time_init(void)
+static int __init alchemy_time_init(unsigned int m2int)
{
struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
unsigned long t;
+ au1x_rtcmatch2_clockdev.irq = m2int;
+
/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
* has been detected. If so install the rtcmatch2 clocksource,
* otherwise don't bother. Note that both bits being set is by
cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */
clockevents_register_device(cd);
- setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction);
+ setup_irq(m2int, &au1x_rtcmatch2_irqaction);
printk(KERN_INFO "Alchemy clocksource installed\n");
- return;
+ return 0;
cntr_err:
+ return -1;
+}
+
+static void __init alchemy_setup_c0timer(void)
+{
/*
* MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this
* function is called. Because the Alchemy counters are unusable
r4k_clockevent_init();
init_r4k_clocksource();
}
+
+static int alchemy_m2inttab[] __initdata = {
+ AU1000_RTC_MATCH2_INT,
+ AU1500_RTC_MATCH2_INT,
+ AU1100_RTC_MATCH2_INT,
+ AU1550_RTC_MATCH2_INT,
+ AU1200_RTC_MATCH2_INT,
+};
+
+void __init plat_time_init(void)
+{
+ int t;
+
+ t = alchemy_get_cputype();
+ if (t == ALCHEMY_CPU_UNKNOWN)
+ alchemy_setup_c0timer();
+ else if (alchemy_time_init(alchemy_m2inttab[t]))
+ alchemy_setup_c0timer();
+}
# Alchemy Develboards
#
-obj-y += prom.o
+obj-y += prom.o bcsr.o platform.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MIPS_PB1000) += pb1000/
obj-$(CONFIG_MIPS_PB1100) += pb1100/
obj-$(CONFIG_MIPS_PB1550) += pb1550/
obj-$(CONFIG_MIPS_DB1000) += db1x00/
obj-$(CONFIG_MIPS_DB1100) += db1x00/
-obj-$(CONFIG_MIPS_DB1200) += pb1200/
+obj-$(CONFIG_MIPS_DB1200) += db1200/
obj-$(CONFIG_MIPS_DB1500) += db1x00/
obj-$(CONFIG_MIPS_DB1550) += db1x00/
obj-$(CONFIG_MIPS_BOSPORUS) += db1x00/
obj-$(CONFIG_MIPS_MIRAGE) += db1x00/
+
+EXTRA_CFLAGS += -Werror
--- /dev/null
+/*
+ * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
+ *
+ * All Alchemy development boards (except, of course, the weird PB1000)
+ * have a few registers in a CPLD with standardised layout; they mostly
+ * only differ in base address.
+ * All registers are 16bits wide with 32bit spacing.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+static struct bcsr_reg {
+ void __iomem *raddr;
+ spinlock_t lock;
+} bcsr_regs[BCSR_CNT];
+
+static void __iomem *bcsr_virt; /* KSEG1 addr of BCSR base */
+static int bcsr_csc_base; /* linux-irq of first cascaded irq */
+
+void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys)
+{
+ int i;
+
+ bcsr1_phys = KSEG1ADDR(CPHYSADDR(bcsr1_phys));
+ bcsr2_phys = KSEG1ADDR(CPHYSADDR(bcsr2_phys));
+
+ bcsr_virt = (void __iomem *)bcsr1_phys;
+
+ for (i = 0; i < BCSR_CNT; i++) {
+ if (i >= BCSR_HEXLEDS)
+ bcsr_regs[i].raddr = (void __iomem *)bcsr2_phys +
+ (0x04 * (i - BCSR_HEXLEDS));
+ else
+ bcsr_regs[i].raddr = (void __iomem *)bcsr1_phys +
+ (0x04 * i);
+
+ spin_lock_init(&bcsr_regs[i].lock);
+ }
+}
+
+unsigned short bcsr_read(enum bcsr_id reg)
+{
+ unsigned short r;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
+ r = __raw_readw(bcsr_regs[reg].raddr);
+ spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
+ return r;
+}
+EXPORT_SYMBOL_GPL(bcsr_read);
+
+void bcsr_write(enum bcsr_id reg, unsigned short val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
+ __raw_writew(val, bcsr_regs[reg].raddr);
+ wmb();
+ spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
+}
+EXPORT_SYMBOL_GPL(bcsr_write);
+
+void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set)
+{
+ unsigned short r;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
+ r = __raw_readw(bcsr_regs[reg].raddr);
+ r &= ~clr;
+ r |= set;
+ __raw_writew(r, bcsr_regs[reg].raddr);
+ wmb();
+ spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
+}
+EXPORT_SYMBOL_GPL(bcsr_mod);
+
+/*
+ * DB1200/PB1200 CPLD IRQ muxer
+ */
+static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d)
+{
+ unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT);
+
+ for ( ; bisr; bisr &= bisr - 1)
+ generic_handle_irq(bcsr_csc_base + __ffs(bisr));
+}
+
+/* NOTE: both the enable and mask bits must be cleared, otherwise the
+ * CPLD generates tons of spurious interrupts (at least on my DB1200).
+ * -- mlau
+ */
+static void bcsr_irq_mask(unsigned int irq_nr)
+{
+ unsigned short v = 1 << (irq_nr - bcsr_csc_base);
+ __raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
+ __raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
+ wmb();
+}
+
+static void bcsr_irq_maskack(unsigned int irq_nr)
+{
+ unsigned short v = 1 << (irq_nr - bcsr_csc_base);
+ __raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
+ __raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
+ __raw_writew(v, bcsr_virt + BCSR_REG_INTSTAT); /* ack */
+ wmb();
+}
+
+static void bcsr_irq_unmask(unsigned int irq_nr)
+{
+ unsigned short v = 1 << (irq_nr - bcsr_csc_base);
+ __raw_writew(v, bcsr_virt + BCSR_REG_INTSET);
+ __raw_writew(v, bcsr_virt + BCSR_REG_MASKSET);
+ wmb();
+}
+
+static struct irq_chip bcsr_irq_type = {
+ .name = "CPLD",
+ .mask = bcsr_irq_mask,
+ .mask_ack = bcsr_irq_maskack,
+ .unmask = bcsr_irq_unmask,
+};
+
+void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq)
+{
+ unsigned int irq;
+
+ /* mask & disable & ack all */
+ __raw_writew(0xffff, bcsr_virt + BCSR_REG_INTCLR);
+ __raw_writew(0xffff, bcsr_virt + BCSR_REG_MASKCLR);
+ __raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSTAT);
+ wmb();
+
+ bcsr_csc_base = csc_start;
+
+ for (irq = csc_start; irq <= csc_end; irq++)
+ set_irq_chip_and_handler_name(irq, &bcsr_irq_type,
+ handle_level_irq, "level");
+
+ set_irq_chained_handler(hook_irq, bcsr_csc_handler);
+}
--- /dev/null
+obj-y += setup.o platform.o
--- /dev/null
+/*
+ * DBAu1200 board platform device registration
+ *
+ * Copyright (C) 2008-2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1550_spi.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-db1x00/db1200.h>
+
+#include "../platform.h"
+
+static struct mtd_partition db1200_spiflash_parts[] = {
+ {
+ .name = "DB1200 SPI flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct flash_platform_data db1200_spiflash_data = {
+ .name = "s25fl001",
+ .parts = db1200_spiflash_parts,
+ .nr_parts = ARRAY_SIZE(db1200_spiflash_parts),
+ .type = "m25p10",
+};
+
+static struct spi_board_info db1200_spi_devs[] __initdata = {
+ {
+ /* TI TMP121AIDBVR temp sensor */
+ .modalias = "tmp121",
+ .max_speed_hz = 2000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = 0,
+ },
+ {
+ /* Spansion S25FL001D0FMA SPI flash */
+ .modalias = "m25p80",
+ .max_speed_hz = 50000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .mode = 0,
+ .platform_data = &db1200_spiflash_data,
+ },
+};
+
+static struct i2c_board_info db1200_i2c_devs[] __initdata = {
+ {
+ /* AT24C04-10 I2C eeprom */
+ I2C_BOARD_INFO("24c04", 0x52),
+ },
+ {
+ /* Philips NE1619 temp/voltage sensor (adm1025 drv) */
+ I2C_BOARD_INFO("ne1619", 0x2d),
+ },
+ {
+ /* I2S audio codec WM8731 */
+ I2C_BOARD_INFO("wm8731", 0x1b),
+ },
+};
+
+/**********************************************************************/
+
+static void au1200_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
+
+ ioaddr &= 0xffffff00;
+
+ if (ctrl & NAND_CLE) {
+ ioaddr += MEM_STNAND_CMD;
+ } else if (ctrl & NAND_ALE) {
+ ioaddr += MEM_STNAND_ADDR;
+ } else {
+ /* assume we want to r/w real data by default */
+ ioaddr += MEM_STNAND_DATA;
+ }
+ this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
+ if (cmd != NAND_CMD_NONE) {
+ __raw_writeb(cmd, this->IO_ADDR_W);
+ wmb();
+ }
+}
+
+static int au1200_nand_device_ready(struct mtd_info *mtd)
+{
+ return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
+}
+
+static const char *db1200_part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition db1200_nand_parts[] = {
+ {
+ .name = "NAND FS 0",
+ .offset = 0,
+ .size = 8 * 1024 * 1024,
+ },
+ {
+ .name = "NAND FS 1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+struct platform_nand_data db1200_nand_platdata = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(db1200_nand_parts),
+ .partitions = db1200_nand_parts,
+ .chip_delay = 20,
+ .part_probe_types = db1200_part_probes,
+ },
+ .ctrl = {
+ .dev_ready = au1200_nand_device_ready,
+ .cmd_ctrl = au1200_nand_cmd_ctrl,
+ },
+};
+
+static struct resource db1200_nand_res[] = {
+ [0] = {
+ .start = DB1200_NAND_PHYS_ADDR,
+ .end = DB1200_NAND_PHYS_ADDR + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device db1200_nand_dev = {
+ .name = "gen_nand",
+ .num_resources = ARRAY_SIZE(db1200_nand_res),
+ .resource = db1200_nand_res,
+ .id = -1,
+ .dev = {
+ .platform_data = &db1200_nand_platdata,
+ }
+};
+
+/**********************************************************************/
+
+static struct smc91x_platdata db1200_eth_data = {
+ .flags = SMC91X_NOWAIT | SMC91X_USE_16BIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
+static struct resource db1200_eth_res[] = {
+ [0] = {
+ .start = DB1200_ETH_PHYS_ADDR,
+ .end = DB1200_ETH_PHYS_ADDR + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DB1200_ETH_INT,
+ .end = DB1200_ETH_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device db1200_eth_dev = {
+ .dev = {
+ .platform_data = &db1200_eth_data,
+ },
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(db1200_eth_res),
+ .resource = db1200_eth_res,
+};
+
+/**********************************************************************/
+
+static struct resource db1200_ide_res[] = {
+ [0] = {
+ .start = DB1200_IDE_PHYS_ADDR,
+ .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DB1200_IDE_INT,
+ .end = DB1200_IDE_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 ide_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device db1200_ide_dev = {
+ .name = "au1200-ide",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ide_dmamask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ },
+ .num_resources = ARRAY_SIZE(db1200_ide_res),
+ .resource = db1200_ide_res,
+};
+
+/**********************************************************************/
+
+static struct platform_device db1200_rtc_dev = {
+ .name = "rtc-au1xxx",
+ .id = -1,
+};
+
+/**********************************************************************/
+
+/* SD carddetects: they're supposed to be edge-triggered, but ack
+ * doesn't seem to work (CPLD Rev 2). Instead, the screaming one
+ * is disabled and its counterpart enabled. The 500ms timeout is
+ * because the carddetect isn't debounced in hardware.
+ */
+static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
+{
+ void(*mmc_cd)(struct mmc_host *, unsigned long);
+
+ if (irq == DB1200_SD0_INSERT_INT) {
+ disable_irq_nosync(DB1200_SD0_INSERT_INT);
+ enable_irq(DB1200_SD0_EJECT_INT);
+ } else {
+ disable_irq_nosync(DB1200_SD0_EJECT_INT);
+ enable_irq(DB1200_SD0_INSERT_INT);
+ }
+
+ /* link against CONFIG_MMC=m */
+ mmc_cd = symbol_get(mmc_detect_change);
+ if (mmc_cd) {
+ mmc_cd(ptr, msecs_to_jiffies(500));
+ symbol_put(mmc_detect_change);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int db1200_mmc_cd_setup(void *mmc_host, int en)
+{
+ int ret;
+
+ if (en) {
+ ret = request_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd,
+ IRQF_DISABLED, "sd_insert", mmc_host);
+ if (ret)
+ goto out;
+
+ ret = request_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd,
+ IRQF_DISABLED, "sd_eject", mmc_host);
+ if (ret) {
+ free_irq(DB1200_SD0_INSERT_INT, mmc_host);
+ goto out;
+ }
+
+ if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT)
+ enable_irq(DB1200_SD0_EJECT_INT);
+ else
+ enable_irq(DB1200_SD0_INSERT_INT);
+
+ } else {
+ free_irq(DB1200_SD0_INSERT_INT, mmc_host);
+ free_irq(DB1200_SD0_EJECT_INT, mmc_host);
+ }
+ ret = 0;
+out:
+ return ret;
+}
+
+static void db1200_mmc_set_power(void *mmc_host, int state)
+{
+ if (state) {
+ bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
+ msleep(400); /* stabilization time */
+ } else
+ bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
+}
+
+static int db1200_mmc_card_readonly(void *mmc_host)
+{
+ return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
+}
+
+static int db1200_mmc_card_inserted(void *mmc_host)
+{
+ return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
+}
+
+static void db1200_mmcled_set(struct led_classdev *led,
+ enum led_brightness brightness)
+{
+ if (brightness != LED_OFF)
+ bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
+ else
+ bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
+}
+
+static struct led_classdev db1200_mmc_led = {
+ .brightness_set = db1200_mmcled_set,
+};
+
+/* needed by arch/mips/alchemy/common/platform.c */
+struct au1xmmc_platform_data au1xmmc_platdata[] = {
+ [0] = {
+ .cd_setup = db1200_mmc_cd_setup,
+ .set_power = db1200_mmc_set_power,
+ .card_inserted = db1200_mmc_card_inserted,
+ .card_readonly = db1200_mmc_card_readonly,
+ .led = &db1200_mmc_led,
+ },
+};
+
+/**********************************************************************/
+
+static struct resource au1200_psc0_res[] = {
+ [0] = {
+ .start = PSC0_PHYS_ADDR,
+ .end = PSC0_PHYS_ADDR + 0x000fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_PSC0_INT,
+ .end = AU1200_PSC0_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = DSCR_CMD0_PSC0_TX,
+ .end = DSCR_CMD0_PSC0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DSCR_CMD0_PSC0_RX,
+ .end = DSCR_CMD0_PSC0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device db1200_i2c_dev = {
+ .name = "au1xpsc_smbus",
+ .id = 0, /* bus number */
+ .num_resources = ARRAY_SIZE(au1200_psc0_res),
+ .resource = au1200_psc0_res,
+};
+
+static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol)
+{
+ if (cs)
+ bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL);
+ else
+ bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0);
+}
+
+static struct au1550_spi_info db1200_spi_platdata = {
+ .mainclk_hz = 50000000, /* PSC0 clock */
+ .num_chipselect = 2,
+ .activate_cs = db1200_spi_cs_en,
+};
+
+static u64 spi_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device db1200_spi_dev = {
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = &db1200_spi_platdata,
+ },
+ .name = "au1550-spi",
+ .id = 0, /* bus number */
+ .num_resources = ARRAY_SIZE(au1200_psc0_res),
+ .resource = au1200_psc0_res,
+};
+
+static struct resource au1200_psc1_res[] = {
+ [0] = {
+ .start = PSC1_PHYS_ADDR,
+ .end = PSC1_PHYS_ADDR + 0x000fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_PSC1_INT,
+ .end = AU1200_PSC1_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = DSCR_CMD0_PSC1_TX,
+ .end = DSCR_CMD0_PSC1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DSCR_CMD0_PSC1_RX,
+ .end = DSCR_CMD0_PSC1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device db1200_audio_dev = {
+ /* name assigned later based on switch setting */
+ .id = 1, /* PSC ID */
+ .num_resources = ARRAY_SIZE(au1200_psc1_res),
+ .resource = au1200_psc1_res,
+};
+
+static struct platform_device *db1200_devs[] __initdata = {
+ NULL, /* PSC0, selected by S6.8 */
+ &db1200_ide_dev,
+ &db1200_eth_dev,
+ &db1200_rtc_dev,
+ &db1200_nand_dev,
+ &db1200_audio_dev,
+};
+
+static int __init db1200_dev_init(void)
+{
+ unsigned long pfc;
+ unsigned short sw;
+ int swapped;
+
+ i2c_register_board_info(0, db1200_i2c_devs,
+ ARRAY_SIZE(db1200_i2c_devs));
+ spi_register_board_info(db1200_spi_devs,
+ ARRAY_SIZE(db1200_i2c_devs));
+
+ /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI)
+ * S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
+ */
+
+ /* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however
+ * this pin is claimed by PSC0 (unused though, but pinmux doesn't
+ * allow to free it without crippling the SPI interface).
+ * As a result, in SPI mode, OTG simply won't work (PSC0 uses
+ * it as an input pin which is pulled high on the boards).
+ */
+ pfc = __raw_readl((void __iomem *)SYS_PINFUNC) & ~SYS_PINFUNC_P0A;
+
+ /* switch off OTG VBUS supply */
+ gpio_request(215, "otg-vbus");
+ gpio_direction_output(215, 1);
+
+ printk(KERN_INFO "DB1200 device configuration:\n");
+
+ sw = bcsr_read(BCSR_SWITCHES);
+ if (sw & BCSR_SWITCHES_DIP_8) {
+ db1200_devs[0] = &db1200_i2c_dev;
+ bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
+
+ pfc |= (2 << 17); /* GPIO2 block owns GPIO215 */
+
+ printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n");
+ printk(KERN_INFO " OTG port VBUS supply available!\n");
+ } else {
+ db1200_devs[0] = &db1200_spi_dev;
+ bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX);
+
+ pfc |= (1 << 17); /* PSC0 owns GPIO215 */
+
+ printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n");
+ printk(KERN_INFO " OTG port VBUS supply disabled\n");
+ }
+ __raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
+ wmb();
+
+ /* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S!
+ * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S
+ */
+ sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7;
+ if (sw == BCSR_SWITCHES_DIP_8) {
+ bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX);
+ db1200_audio_dev.name = "au1xpsc_i2s";
+ printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n");
+ } else {
+ bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0);
+ db1200_audio_dev.name = "au1xpsc_ac97";
+ printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n");
+ }
+
+ /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
+ __raw_writel(PSC_SEL_CLK_SERCLK,
+ (void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+ wmb();
+
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+ PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ PCMCIA_MEM_PHYS_ADDR,
+ PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ PCMCIA_IO_PHYS_ADDR,
+ PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ DB1200_PC0_INT,
+ DB1200_PC0_INSERT_INT,
+ /*DB1200_PC0_STSCHG_INT*/0,
+ DB1200_PC0_EJECT_INT,
+ 0);
+
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+ PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+ PCMCIA_MEM_PHYS_ADDR + 0x004000000,
+ PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
+ PCMCIA_IO_PHYS_ADDR + 0x004000000,
+ PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
+ DB1200_PC1_INT,
+ DB1200_PC1_INSERT_INT,
+ /*DB1200_PC1_STSCHG_INT*/0,
+ DB1200_PC1_EJECT_INT,
+ 1);
+
+ swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
+ db1x_register_norflash(64 << 20, 2, swapped);
+
+ return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
+}
+device_initcall(db1200_dev_init);
+
+/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */
+int board_au1200fb_panel(void)
+{
+ return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
+}
+
+int board_au1200fb_panel_init(void)
+{
+ /* Apply power */
+ bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+ BCSR_BOARD_LCDBL);
+ return 0;
+}
+
+int board_au1200fb_panel_shutdown(void)
+{
+ /* Remove power */
+ bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+ BCSR_BOARD_LCDBL, 0);
+ return 0;
+}
--- /dev/null
+/*
+ * Alchemy/AMD/RMI DB1200 board setup.
+ *
+ * Licensed under the terms outlined in the file COPYING in the root of
+ * this source archive.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-db1x00/db1200.h>
+
+const char *get_system_type(void)
+{
+ return "Alchemy Db1200";
+}
+
+void __init board_setup(void)
+{
+ unsigned long freq0, clksrc, div, pfc;
+ unsigned short whoami;
+
+ bcsr_init(DB1200_BCSR_PHYS_ADDR,
+ DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
+
+ whoami = bcsr_read(BCSR_WHOAMI);
+ printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d"
+ " Board-ID %d Daughtercard ID %d\n",
+ (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
+
+ /* SMBus/SPI on PSC0, Audio on PSC1 */
+ pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
+ pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+ pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
+ pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
+ __raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
+ wmb();
+
+ /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
+ * CPU clock; all other clock generators off/unused.
+ */
+ div = (get_au1x00_speed() + 25000000) / 50000000;
+ if (div & 1)
+ div++;
+ div = ((div >> 1) - 1) & 0xff;
+
+ freq0 = div << SYS_FC_FRDIV0_BIT;
+ __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
+ wmb();
+ freq0 |= SYS_FC_FE0; /* enable F0 */
+ __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
+ wmb();
+
+ /* psc0_intclk comes 1:1 from F0 */
+ clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
+ __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
+ wmb();
+}
+
+/* use the hexleds to count the number of times the cpu has entered
+ * wait, the dots to indicate whether the CPU is currently idle or
+ * active (dots off = sleeping, dots on = working) for cases where
+ * the number doesn't change for a long(er) period of time.
+ */
+static void db1200_wait(void)
+{
+ __asm__(" .set push \n"
+ " .set mips3 \n"
+ " .set noreorder \n"
+ " cache 0x14, 0(%0) \n"
+ " cache 0x14, 32(%0) \n"
+ " cache 0x14, 64(%0) \n"
+ /* dots off: we're about to call wait */
+ " lui $26, 0xb980 \n"
+ " ori $27, $0, 3 \n"
+ " sb $27, 0x18($26) \n"
+ " sync \n"
+ " nop \n"
+ " wait \n"
+ " nop \n"
+ " nop \n"
+ " nop \n"
+ " nop \n"
+ " nop \n"
+ /* dots on: there's work to do, increment cntr */
+ " lui $26, 0xb980 \n"
+ " sb $0, 0x18($26) \n"
+ " lui $26, 0xb9c0 \n"
+ " lb $27, 0($26) \n"
+ " addiu $27, $27, 1 \n"
+ " sb $27, 0($26) \n"
+ " sync \n"
+ " .set pop \n"
+ : : "r" (db1200_wait));
+}
+
+static int __init db1200_arch_init(void)
+{
+ /* GPIO7 is low-level triggered CPLD cascade */
+ set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
+ bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
+
+ /* do not autoenable these: CPLD has broken edge int handling,
+ * and the CD handler setup requires manual enabling to work
+ * around that.
+ */
+ irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
+ irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+
+ if (cpu_wait)
+ cpu_wait = db1200_wait;
+
+ return 0;
+}
+arch_initcall(db1200_arch_init);
# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
#
-obj-y := board_setup.o irqmap.o
+obj-y := board_setup.o platform.o
#include <linux/gpio.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
#include <asm/mach-db1x00/db1x00.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/reboot.h>
#include <prom.h>
+#ifdef CONFIG_MIPS_DB1500
+char irq_tab_alchemy[][5] __initdata = {
+ [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */
+ [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
+};
+
+#endif
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+#ifdef CONFIG_MIPS_DB1550
+char irq_tab_alchemy[][5] __initdata = {
+ [11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */
+ [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
+};
+#endif
+
+
+#ifdef CONFIG_MIPS_BOSPORUS
+char irq_tab_alchemy[][5] __initdata = {
+ [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */
+ [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741 */
+ [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
+};
+
+/*
+ * Micrel/Kendin 5 port switch attached to MAC0,
+ * MAC0 is associated with PHY address 5 (== WAN port)
+ * MAC1 is not associated with any PHY, since it's connected directly
+ * to the switch.
+ * no interrupts are used
+ */
+static struct au1000_eth_platform_data eth0_pdata = {
+ .phy_static_config = 1,
+ .phy_addr = 5,
+};
+
+static void bosporus_power_off(void)
+{
+ printk(KERN_INFO "It's now safe to turn off power\n");
+ while (1)
+ asm volatile (".set mips3 ; wait ; .set mips0");
+}
const char *get_system_type(void)
{
-#ifdef CONFIG_MIPS_BOSPORUS
return "Alchemy Bosporus Gateway Reference";
-#else
- return "Alchemy Db1x00";
+}
#endif
+
+
+#ifdef CONFIG_MIPS_MIRAGE
+char irq_tab_alchemy[][5] __initdata = {
+ [11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */
+ [12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
+ [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
+};
+
+static void mirage_power_off(void)
+{
+ alchemy_gpio_direction_output(210, 1);
+}
+
+const char *get_system_type(void)
+{
+ return "Alchemy Mirage";
+}
+#endif
+
+
+#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
+static void mips_softreset(void)
+{
+ asm volatile ("jr\t%0" : : "r"(0xbfc00000));
}
-void board_reset(void)
+#else
+
+const char *get_system_type(void)
{
- /* Hit BCSR.SW_RESET[RESET] */
- bcsr->swreset = 0x0000;
+ return "Alchemy Db1x00";
}
+#endif
+
void __init board_setup(void)
{
- u32 pin_func = 0;
- char *argptr;
-
- argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- argptr = strstr(argptr, "console=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
+ unsigned long bcsr1, bcsr2;
+ u32 pin_func;
+
+ bcsr1 = DB1000_BCSR_PHYS_ADDR;
+ bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
+
+ pin_func = 0;
+
+#ifdef CONFIG_MIPS_DB1000
+ printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1500
+ printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
#endif
+#ifdef CONFIG_MIPS_DB1100
+ printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
+#endif
+#ifdef CONFIG_MIPS_BOSPORUS
+ au1xxx_override_eth_cfg(0, ð0_pdata);
-#ifdef CONFIG_FB_AU1100
- argptr = strstr(argptr, "video=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- /* default panel */
- /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
- }
+ printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
#endif
+#ifdef CONFIG_MIPS_MIRAGE
+ printk(KERN_INFO "AMD Alchemy Mirage Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1550
+ printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
- /* au1000 does not support vra, au1500 and au1100 do */
- strcat(argptr, " au1000_audio=vra");
- argptr = prom_getcmdline();
+ bcsr1 = DB1550_BCSR_PHYS_ADDR;
+ bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS;
#endif
+ /* initialize board register space */
+ bcsr_init(bcsr1, bcsr2);
+
/* Not valid for Au1550 */
#if defined(CONFIG_IRDA) && \
(defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
au_writel(pin_func, SYS_PINFUNC);
/* Power off until the driver is in use */
- bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
- bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
- au_sync();
+ bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+ BCSR_RESETS_IRDA_MODE_OFF);
#endif
- bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
+ bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */
/* Enable GPIO[31:0] inputs */
alchemy_gpio1_input_enable();
* be part of the audio driver.
*/
alchemy_gpio_direction_output(209, 1);
-#endif
-
- au_sync();
-#ifdef CONFIG_MIPS_DB1000
- printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1500
- printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1100
- printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
+ pm_power_off = mirage_power_off;
+ _machine_halt = mirage_power_off;
+ _machine_restart = (void(*)(char *))mips_softreset;
#endif
+
#ifdef CONFIG_MIPS_BOSPORUS
- printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
+ pm_power_off = bosporus_power_off;
+ _machine_halt = bosporus_power_off;
+ _machine_restart = (void(*)(char *))mips_softreset;
#endif
-#ifdef CONFIG_MIPS_MIRAGE
- printk(KERN_INFO "AMD Alchemy Mirage Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1550
- printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
+ au_sync();
+}
+
+static int __init db1x00_init_irq(void)
+{
+#if defined(CONFIG_MIPS_MIRAGE)
+ set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */
+#elif defined(CONFIG_MIPS_DB1550)
+ set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+ set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); /* CD1# */
+ set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+ set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+ set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+ set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
+#elif defined(CONFIG_MIPS_DB1500)
+ set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+ set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
+ set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+ set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+ set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+ set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
+#elif defined(CONFIG_MIPS_DB1100)
+ set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+ set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
+ set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+ set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+ set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+ set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
+#elif defined(CONFIG_MIPS_DB1000)
+ set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+ set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
+ set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+ set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+ set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+ set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
#endif
+ return 0;
}
+arch_initcall(db1x00_init_irq);
+++ /dev/null
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_MIPS_DB1500
-char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
- [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
- [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
- [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
- [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
- [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
-};
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
- [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-
-#ifndef CONFIG_MIPS_MIRAGE
-#ifdef CONFIG_MIPS_DB1550
- { AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
- { AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
-#else
- { AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */
- { AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */
- { AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
-
- { AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */
- { AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */
- { AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
-#endif
-#else
- { AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */
-#endif
-
-};
-
-void __init board_init_irq(void)
-{
- au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}
--- /dev/null
+/*
+ * DBAu1xxx board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include "../platform.h"
+
+/* DB1xxx PCMCIA interrupt sources:
+ * CD0/1 GPIO0/3
+ * STSCHG0/1 GPIO1/4
+ * CARD0/1 GPIO2/5
+ * Db1550: 0/1, 21/22, 3/5
+ */
+
+#define DB1XXX_HAS_PCMCIA
+#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
+
+#if defined(CONFIG_MIPS_DB1000)
+#define DB1XXX_PCMCIA_CD0 AU1000_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1 AU1000_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO5_INT
+#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#elif defined(CONFIG_MIPS_DB1100)
+#define DB1XXX_PCMCIA_CD0 AU1100_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0 AU1100_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0 AU1100_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1 AU1100_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1 AU1100_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1 AU1100_GPIO5_INT
+#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#elif defined(CONFIG_MIPS_DB1500)
+#define DB1XXX_PCMCIA_CD0 AU1500_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0 AU1500_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1 AU1500_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1 AU1500_GPIO5_INT
+#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#elif defined(CONFIG_MIPS_DB1550)
+#define DB1XXX_PCMCIA_CD0 AU1550_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0 AU1550_GPIO21_INT
+#define DB1XXX_PCMCIA_CARD0 AU1550_GPIO3_INT
+#define DB1XXX_PCMCIA_CD1 AU1550_GPIO1_INT
+#define DB1XXX_PCMCIA_STSCHG1 AU1550_GPIO22_INT
+#define DB1XXX_PCMCIA_CARD1 AU1550_GPIO5_INT
+#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#else
+/* other board: no PCMCIA */
+#undef DB1XXX_HAS_PCMCIA
+#undef F_SWAPPED
+#define F_SWAPPED 0
+#if defined(CONFIG_MIPS_BOSPORUS)
+#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */
+#define BOARD_FLASH_WIDTH 2 /* 16-bits */
+#elif defined(CONFIG_MIPS_MIRAGE)
+#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
+#define BOARD_FLASH_WIDTH 4 /* 32-bits */
+#endif
+#endif
+
+static int __init db1xxx_dev_init(void)
+{
+#ifdef DB1XXX_HAS_PCMCIA
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+ PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ PCMCIA_MEM_PHYS_ADDR,
+ PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ PCMCIA_IO_PHYS_ADDR,
+ PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ DB1XXX_PCMCIA_CARD0,
+ DB1XXX_PCMCIA_CD0,
+ /*DB1XXX_PCMCIA_STSCHG0*/0,
+ 0,
+ 0);
+
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+ PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+ PCMCIA_MEM_PHYS_ADDR + 0x004000000,
+ PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
+ PCMCIA_IO_PHYS_ADDR + 0x004000000,
+ PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
+ DB1XXX_PCMCIA_CARD1,
+ DB1XXX_PCMCIA_CD1,
+ /*DB1XXX_PCMCIA_STSCHG1*/0,
+ 0,
+ 1);
+#endif
+ db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
+ return 0;
+}
+device_initcall(db1xxx_dev_init);
#include <asm/mach-pb1x00/pb1000.h>
#include <prom.h>
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_15, IRQF_TRIGGER_LOW, 0 },
-};
-
+#include "../platform.h"
const char *get_system_type(void)
{
{
}
-void __init board_init_irq(void)
-{
- au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}
-
void __init board_setup(void)
{
u32 pin_func, static_cfg0;
u32 sys_freqctrl, sys_clksrc;
u32 prid = read_c0_prid();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- char *argptr = prom_getcmdline();
- argptr = strstr(argptr, "console=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
-#endif
+ sys_freqctrl = 0;
+ sys_clksrc = 0;
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
break;
}
}
+
+static int __init pb1000_init_irq(void)
+{
+ set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW);
+ return 0;
+}
+arch_initcall(pb1000_init_irq);
+
+static int __init pb1000_device_init(void)
+{
+ return db1x_register_norflash(8 * 1024 * 1024, 4, 0);
+}
+device_initcall(pb1000_device_init);
# Makefile for the Alchemy Semiconductor Pb1100 board.
#
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1100.h>
+#include <asm/mach-db1x00/bcsr.h>
#include <prom.h>
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_9, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */
- { AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */
- { AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */
- { AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */
-};
-
-
const char *get_system_type(void)
{
return "Alchemy Pb1100";
void board_reset(void)
{
- /* Hit BCSR.RST_VDDI[SOFT_RESET] */
- au_writel(0x00000000, PB1100_RST_VDDI);
-}
-
-void __init board_init_irq(void)
-{
- au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+ bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_setup(void)
{
volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
- char *argptr;
-
- argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- argptr = strstr(argptr, "console=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
-#endif
-
-#ifdef CONFIG_FB_AU1100
- argptr = strstr(argptr, "video=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- /* default panel */
- /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
- }
-#endif
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
- /* au1000 does not support vra, au1500 and au1100 do */
- strcat(argptr, " au1000_audio=vra");
- argptr = prom_getcmdline();
-#endif
+ bcsr_init(DB1000_BCSR_PHYS_ADDR,
+ DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_sync();
}
}
+
+static int __init pb1100_init_irq(void)
+{
+ set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */
+ set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
+ set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */
+ set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */
+
+ return 0;
+}
+arch_initcall(pb1100_init_irq);
--- /dev/null
+/*
+ * Pb1100 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../platform.h"
+
+static int __init pb1100_dev_init(void)
+{
+ int swapped;
+
+ /* PCMCIA. single socket, identical to Pb1500 */
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+ PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ PCMCIA_MEM_PHYS_ADDR,
+ PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ PCMCIA_IO_PHYS_ADDR,
+ PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ AU1100_GPIO11_INT, /* card */
+ AU1100_GPIO9_INT, /* insert */
+ /*AU1100_GPIO10_INT*/0, /* stschg */
+ 0, /* eject */
+ 0); /* id */
+
+ swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT;
+ db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+
+ return 0;
+}
+device_initcall(pb1100_dev_init);
# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
#
-obj-y := board_setup.o irqmap.o platform.o
+obj-y := board_setup.o platform.o
EXTRA_CFLAGS += -Werror
*/
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/sched.h>
-#include <prom.h>
-#include <au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_INT_BEGIN DB1200_INT_BEGIN
+#define PB1200_INT_END DB1200_INT_END
+#endif
+#include <prom.h>
const char *get_system_type(void)
{
void board_reset(void)
{
- bcsr->resets = 0;
- bcsr->system = 0;
+ bcsr_write(BCSR_RESETS, 0);
+ bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_setup(void)
{
- char *argptr;
-
- argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- argptr = strstr(argptr, "console=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
-#endif
-#ifdef CONFIG_FB_AU1200
- strcat(argptr, " video=au1200fb:panel:bs");
-#endif
+ printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
+ bcsr_init(PB1200_BCSR_PHYS_ADDR,
+ PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
#if 0
{
u32 pin_func;
/* Select SMBus in CPLD */
- bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
+ bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
pin_func = au_readl(SYS_PINFUNC);
au_sync();
/*
* The Pb1200 development board uses external MUX for PSC0 to
- * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+ * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI
*/
#ifdef CONFIG_I2C_AU1550
- bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
+ bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
#endif
au_sync();
+}
-#ifdef CONFIG_MIPS_PB1200
- printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1200
- printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
-#endif
+static int __init pb1200_init_irq(void)
+{
+ /* We have a problem with CPLD rev 3. */
+ if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
+ printk(KERN_ERR "updated to latest revision. This software will\n");
+ printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ panic("Game over. Your score is 0.");
+ }
+
+ set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
+ bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT);
+
+ return 0;
}
+arch_initcall(pb1200_init_irq);
+
int board_au1200fb_panel(void)
{
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
- int p;
-
- p = bcsr->switches;
- p >>= 8;
- p &= 0x0F;
- return p;
+ return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
}
int board_au1200fb_panel_init(void)
{
/* Apply power */
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
- bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL;
+ bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+ BCSR_BOARD_LCDBL);
/* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
return 0;
}
int board_au1200fb_panel_shutdown(void)
{
/* Remove power */
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
- bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
- BCSR_BOARD_LCDBL);
+ bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+ BCSR_BOARD_LCDBL, 0);
/* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
return 0;
}
+++ /dev/null
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#define PB1200_INT_BEGIN DB1200_INT_BEGIN
-#define PB1200_INT_END DB1200_INT_END
-#endif
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- /* This is external interrupt cascade */
- { AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 },
-};
-
-
-/*
- * Support for External interrupts on the Pb1200 Development platform.
- */
-
-static void pb1200_cascade_handler(unsigned int irq, struct irq_desc *d)
-{
- unsigned short bisr = bcsr->int_status;
-
- for ( ; bisr; bisr &= bisr - 1)
- generic_handle_irq(PB1200_INT_BEGIN + __ffs(bisr));
-}
-
-/* NOTE: both the enable and mask bits must be cleared, otherwise the
- * CPLD generates tons of spurious interrupts (at least on the DB1200).
- */
-static void pb1200_mask_irq(unsigned int irq_nr)
-{
- bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
- bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
- au_sync();
-}
-
-static void pb1200_maskack_irq(unsigned int irq_nr)
-{
- bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
- bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
- bcsr->int_status = 1 << (irq_nr - PB1200_INT_BEGIN); /* ack */
- au_sync();
-}
-
-static void pb1200_unmask_irq(unsigned int irq_nr)
-{
- bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
- bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
- au_sync();
-}
-
-static struct irq_chip pb1200_cpld_irq_type = {
-#ifdef CONFIG_MIPS_PB1200
- .name = "Pb1200 Ext",
-#endif
-#ifdef CONFIG_MIPS_DB1200
- .name = "Db1200 Ext",
-#endif
- .mask = pb1200_mask_irq,
- .mask_ack = pb1200_maskack_irq,
- .unmask = pb1200_unmask_irq,
-};
-
-void __init board_init_irq(void)
-{
- unsigned int irq;
-
- au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-
-#ifdef CONFIG_MIPS_PB1200
- /* We have a problem with CPLD rev 3. */
- if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
- printk(KERN_ERR "WARNING!!!\n");
- printk(KERN_ERR "WARNING!!!\n");
- printk(KERN_ERR "WARNING!!!\n");
- printk(KERN_ERR "WARNING!!!\n");
- printk(KERN_ERR "WARNING!!!\n");
- printk(KERN_ERR "WARNING!!!\n");
- printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
- printk(KERN_ERR "updated to latest revision. This software will\n");
- printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
- printk(KERN_ERR "WARNING!!!\n");
- printk(KERN_ERR "WARNING!!!\n");
- printk(KERN_ERR "WARNING!!!\n");
- printk(KERN_ERR "WARNING!!!\n");
- printk(KERN_ERR "WARNING!!!\n");
- printk(KERN_ERR "WARNING!!!\n");
- panic("Game over. Your score is 0.");
- }
-#endif
- /* mask & disable & ack all */
- bcsr->intclr_mask = 0xffff;
- bcsr->intclr = 0xffff;
- bcsr->int_status = 0xffff;
- au_sync();
-
- for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++)
- set_irq_chip_and_handler_name(irq, &pb1200_cpld_irq_type,
- handle_level_irq, "level");
-
- set_irq_chained_handler(AU1000_GPIO_7, pb1200_cascade_handler);
-}
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../platform.h"
static int mmc_activity;
static void pb1200mmc0_set_power(void *mmc_host, int state)
{
if (state)
- bcsr->board |= BCSR_BOARD_SD0PWR;
+ bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
else
- bcsr->board &= ~BCSR_BOARD_SD0PWR;
+ bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
- au_sync_delay(1);
+ msleep(1);
}
static int pb1200mmc0_card_readonly(void *mmc_host)
{
- return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0;
+ return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
}
static int pb1200mmc0_card_inserted(void *mmc_host)
{
- return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0;
+ return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
}
static void pb1200_mmcled_set(struct led_classdev *led,
{
if (brightness != LED_OFF) {
if (++mmc_activity == 1)
- bcsr->disk_leds &= ~(1 << 8);
+ bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
} else {
if (--mmc_activity == 0)
- bcsr->disk_leds |= (1 << 8);
+ bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
}
}
.brightness_set = pb1200_mmcled_set,
};
-#ifndef CONFIG_MIPS_DB1200
static void pb1200mmc1_set_power(void *mmc_host, int state)
{
if (state)
- bcsr->board |= BCSR_BOARD_SD1PWR;
+ bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
else
- bcsr->board &= ~BCSR_BOARD_SD1PWR;
+ bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
- au_sync_delay(1);
+ msleep(1);
}
static int pb1200mmc1_card_readonly(void *mmc_host)
{
- return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0;
+ return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
}
static int pb1200mmc1_card_inserted(void *mmc_host)
{
- return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0;
+ return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
}
-#endif
const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
[0] = {
.cd_setup = NULL, /* use poll-timer in driver */
.led = &pb1200mmc_led,
},
-#ifndef CONFIG_MIPS_DB1200
[1] = {
.set_power = pb1200mmc1_set_power,
.card_inserted = pb1200mmc1_card_inserted,
.cd_setup = NULL, /* use poll-timer in driver */
.led = &pb1200mmc_led,
},
-#endif
};
static struct resource ide_resources[] = {
static int __init board_register_devices(void)
{
+ int swapped;
+
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+ PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ PCMCIA_MEM_PHYS_ADDR,
+ PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ PCMCIA_IO_PHYS_ADDR,
+ PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ PB1200_PC0_INT,
+ PB1200_PC0_INSERT_INT,
+ /*PB1200_PC0_STSCHG_INT*/0,
+ PB1200_PC0_EJECT_INT,
+ 0);
+
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+ PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+ PCMCIA_MEM_PHYS_ADDR + 0x008000000,
+ PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1,
+ PCMCIA_IO_PHYS_ADDR + 0x008000000,
+ PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1,
+ PB1200_PC1_INT,
+ PB1200_PC1_INSERT_INT,
+ /*PB1200_PC1_STSCHG_INT*/0,
+ PB1200_PC1_EJECT_INT,
+ 1);
+
+ swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
+ db1x_register_norflash(128 * 1024 * 1024, 2, swapped);
+
return platform_add_devices(board_platform_devices,
ARRAY_SIZE(board_platform_devices));
}
-
-arch_initcall(board_register_devices);
+device_initcall(board_register_devices);
# Makefile for the Alchemy Semiconductor Pb1500 board.
#
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1500.h>
+#include <asm/mach-db1x00/bcsr.h>
#include <prom.h>
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
- [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
- { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
- { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
- { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
- { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
+ [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */
+ [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
};
void board_reset(void)
{
- /* Hit BCSR.RST_VDDI[SOFT_RESET] */
- au_writel(0x00000000, PB1500_RST_VDDI);
-}
-
-void __init board_init_irq(void)
-{
- au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+ bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_setup(void)
{
u32 pin_func;
u32 sys_freqctrl, sys_clksrc;
- char *argptr;
-
- argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- argptr = strstr(argptr, "console=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
-#endif
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
- /* au1000 does not support vra, au1500 and au1100 do */
- strcat(argptr, " au1000_audio=vra");
- argptr = prom_getcmdline();
-#endif
+ bcsr_init(DB1000_BCSR_PHYS_ADDR,
+ DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
sys_clksrc = sys_freqctrl = pin_func = 0;
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_sync();
}
}
+
+static int __init pb1500_init_irq(void)
+{
+ set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */
+ set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */
+ set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+ set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
+ set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
+
+ return 0;
+}
+arch_initcall(pb1500_init_irq);
--- /dev/null
+/*
+ * Pb1500 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../platform.h"
+
+static int __init pb1500_dev_init(void)
+{
+ int swapped;
+
+ /* PCMCIA. single socket, identical to Pb1500 */
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+ PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ PCMCIA_MEM_PHYS_ADDR,
+ PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ PCMCIA_IO_PHYS_ADDR,
+ PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ AU1500_GPIO11_INT, /* card */
+ AU1500_GPIO9_INT, /* insert */
+ /*AU1500_GPIO10_INT*/0, /* stschg */
+ 0, /* eject */
+ 0); /* id */
+
+ swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT;
+ db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+
+ return 0;
+}
+device_initcall(pb1500_dev_init);
# Makefile for the Alchemy Semiconductor Pb1550 board.
#
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-au1x00/gpio.h>
#include <prom.h>
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
- { AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
+ [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
const char *get_system_type(void)
void board_reset(void)
{
- /* Hit BCSR.SYSTEM[RESET] */
- au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
-}
-
-void __init board_init_irq(void)
-{
- au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+ bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_setup(void)
{
u32 pin_func;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- char *argptr;
- argptr = prom_getcmdline();
- argptr = strstr(argptr, "console=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
-#endif
+ bcsr_init(PB1550_BCSR_PHYS_ADDR,
+ PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
+
+ alchemy_gpio2_enable();
/*
* Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
au_writel(pin_func, SYS_PINFUNC);
- au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
- au_sync();
+ bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */
printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
}
+
+static int __init pb1550_init_irq(void)
+{
+ set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
+
+ /* enable both PCMCIA card irqs in the shared line */
+ alchemy_gpio2_enable_int(201);
+ alchemy_gpio2_enable_int(202);
+
+ return 0;
+}
+arch_initcall(pb1550_init_irq);
--- /dev/null
+/*
+ * Pb1550 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../platform.h"
+
+static int __init pb1550_dev_init(void)
+{
+ int swapped;
+
+ /* Pb1550, like all others, also has statuschange irqs; however they're
+ * wired up on one of the Au1550's shared GPIO201_205 line, which also
+ * services the PCMCIA card interrupts. So we ignore statuschange and
+ * use the GPIO201_205 exclusively for card interrupts, since a) pcmcia
+ * drivers are used to shared irqs and b) statuschange isn't really use-
+ * ful anyway.
+ */
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+ PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ PCMCIA_MEM_PHYS_ADDR,
+ PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ PCMCIA_IO_PHYS_ADDR,
+ PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ AU1550_GPIO201_205_INT,
+ AU1550_GPIO0_INT,
+ 0,
+ 0,
+ 0);
+
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+ PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+ PCMCIA_MEM_PHYS_ADDR + 0x008000000,
+ PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1,
+ PCMCIA_IO_PHYS_ADDR + 0x008000000,
+ PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1,
+ AU1550_GPIO201_205_INT,
+ AU1550_GPIO1_INT,
+ 0,
+ 0,
+ 1);
+
+ swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT;
+ db1x_register_norflash(128 * 1024 * 1024, 4, swapped);
+
+ return 0;
+}
+device_initcall(pb1550_dev_init);
--- /dev/null
+/*
+ * devoard misc stuff.
+ */
+
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+static void db1x_power_off(void)
+{
+ bcsr_write(BCSR_RESETS, 0);
+ bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET);
+}
+
+static void db1x_reset(char *c)
+{
+ bcsr_write(BCSR_RESETS, 0);
+ bcsr_write(BCSR_SYSTEM, 0);
+}
+
+static int __init db1x_poweroff_setup(void)
+{
+ if (!pm_power_off)
+ pm_power_off = db1x_power_off;
+ if (!_machine_halt)
+ _machine_halt = db1x_power_off;
+ if (!_machine_restart)
+ _machine_restart = db1x_reset;
+
+ return 0;
+}
+late_initcall(db1x_poweroff_setup);
+
+/* register a pcmcia socket */
+int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start,
+ phys_addr_t pcmcia_attr_end,
+ phys_addr_t pcmcia_mem_start,
+ phys_addr_t pcmcia_mem_end,
+ phys_addr_t pcmcia_io_start,
+ phys_addr_t pcmcia_io_end,
+ int card_irq,
+ int cd_irq,
+ int stschg_irq,
+ int eject_irq,
+ int id)
+{
+ int cnt, i, ret;
+ struct resource *sr;
+ struct platform_device *pd;
+
+ cnt = 5;
+ if (eject_irq)
+ cnt++;
+ if (stschg_irq)
+ cnt++;
+
+ sr = kzalloc(sizeof(struct resource) * cnt, GFP_KERNEL);
+ if (!sr)
+ return -ENOMEM;
+
+ pd = platform_device_alloc("db1xxx_pcmcia", id);
+ if (!pd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ sr[0].name = "pcmcia-attr";
+ sr[0].flags = IORESOURCE_MEM;
+ sr[0].start = pcmcia_attr_start;
+ sr[0].end = pcmcia_attr_end;
+
+ sr[1].name = "pcmcia-mem";
+ sr[1].flags = IORESOURCE_MEM;
+ sr[1].start = pcmcia_mem_start;
+ sr[1].end = pcmcia_mem_end;
+
+ sr[2].name = "pcmcia-io";
+ sr[2].flags = IORESOURCE_MEM;
+ sr[2].start = pcmcia_io_start;
+ sr[2].end = pcmcia_io_end;
+
+ sr[3].name = "insert";
+ sr[3].flags = IORESOURCE_IRQ;
+ sr[3].start = sr[3].end = cd_irq;
+
+ sr[4].name = "card";
+ sr[4].flags = IORESOURCE_IRQ;
+ sr[4].start = sr[4].end = card_irq;
+
+ i = 5;
+ if (stschg_irq) {
+ sr[i].name = "stschg";
+ sr[i].flags = IORESOURCE_IRQ;
+ sr[i].start = sr[i].end = stschg_irq;
+ i++;
+ }
+ if (eject_irq) {
+ sr[i].name = "eject";
+ sr[i].flags = IORESOURCE_IRQ;
+ sr[i].start = sr[i].end = eject_irq;
+ }
+
+ pd->resource = sr;
+ pd->num_resources = cnt;
+
+ ret = platform_device_add(pd);
+ if (!ret)
+ return 0;
+
+ platform_device_put(pd);
+out:
+ kfree(sr);
+ return ret;
+}
+
+#define YAMON_SIZE 0x00100000
+#define YAMON_ENV_SIZE 0x00040000
+
+int __init db1x_register_norflash(unsigned long size, int width,
+ int swapped)
+{
+ struct physmap_flash_data *pfd;
+ struct platform_device *pd;
+ struct mtd_partition *parts;
+ struct resource *res;
+ int ret, i;
+
+ if (size < (8 * 1024 * 1024))
+ return -EINVAL;
+
+ ret = -ENOMEM;
+ parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL);
+ if (!parts)
+ goto out;
+
+ res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+ if (!res)
+ goto out1;
+
+ pfd = kzalloc(sizeof(struct physmap_flash_data), GFP_KERNEL);
+ if (!pfd)
+ goto out2;
+
+ pd = platform_device_alloc("physmap-flash", 0);
+ if (!pd)
+ goto out3;
+
+ /* NOR flash ends at 0x20000000, regardless of size */
+ res->start = 0x20000000 - size;
+ res->end = 0x20000000 - 1;
+ res->flags = IORESOURCE_MEM;
+
+ /* partition setup. Most Develboards have a switch which allows
+ * to swap the physical locations of the 2 NOR flash banks.
+ */
+ i = 0;
+ if (!swapped) {
+ /* first NOR chip */
+ parts[i].offset = 0;
+ parts[i].name = "User FS";
+ parts[i].size = size / 2;
+ i++;
+ }
+
+ parts[i].offset = MTDPART_OFS_APPEND;
+ parts[i].name = "User FS 2";
+ parts[i].size = (size / 2) - (0x20000000 - 0x1fc00000);
+ i++;
+
+ parts[i].offset = MTDPART_OFS_APPEND;
+ parts[i].name = "YAMON";
+ parts[i].size = YAMON_SIZE;
+ parts[i].mask_flags = MTD_WRITEABLE;
+ i++;
+
+ parts[i].offset = MTDPART_OFS_APPEND;
+ parts[i].name = "raw kernel";
+ parts[i].size = 0x00400000 - YAMON_SIZE - YAMON_ENV_SIZE;
+ i++;
+
+ parts[i].offset = MTDPART_OFS_APPEND;
+ parts[i].name = "YAMON Env";
+ parts[i].size = YAMON_ENV_SIZE;
+ parts[i].mask_flags = MTD_WRITEABLE;
+ i++;
+
+ if (swapped) {
+ parts[i].offset = MTDPART_OFS_APPEND;
+ parts[i].name = "User FS";
+ parts[i].size = size / 2;
+ i++;
+ }
+
+ pfd->width = width;
+ pfd->parts = parts;
+ pfd->nr_parts = 5;
+
+ pd->dev.platform_data = pfd;
+ pd->resource = res;
+ pd->num_resources = 1;
+
+ ret = platform_device_add(pd);
+ if (!ret)
+ return ret;
+
+ platform_device_put(pd);
+out3:
+ kfree(pfd);
+out2:
+ kfree(res);
+out1:
+ kfree(parts);
+out:
+ return ret;
+}
--- /dev/null
+#ifndef _DEVBOARD_PLATFORM_H_
+#define _DEVBOARD_PLATFORM_H_
+
+#include <linux/init.h>
+
+int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start,
+ phys_addr_t pcmcia_attr_len,
+ phys_addr_t pcmcia_mem_start,
+ phys_addr_t pcmcia_mem_end,
+ phys_addr_t pcmcia_io_start,
+ phys_addr_t pcmcia_io_end,
+ int card_irq,
+ int cd_irq,
+ int stschg_irq,
+ int eject_irq,
+ int id);
+
+int __init db1x_register_norflash(unsigned long size, int width,
+ int swapped);
+
+#endif
#include <linux/sysfs.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/gpio.h>
+#include <asm/mach-db1x00/bcsr.h>
/*
* Generic suspend userspace interface for Alchemy development boards.
static int db1x_pm_enter(suspend_state_t state)
{
+ unsigned short bcsrs[16];
+ int i, j, hasint;
+
+ /* save CPLD regs */
+ hasint = bcsr_read(BCSR_WHOAMI);
+ hasint = BCSR_WHOAMI_BOARD(hasint) >= BCSR_WHOAMI_DB1200;
+ j = (hasint) ? BCSR_MASKSET : BCSR_SYSTEM;
+
+ for (i = BCSR_STATUS; i <= j; i++)
+ bcsrs[i] = bcsr_read(i);
+
+ /* shut off hexleds */
+ bcsr_write(BCSR_HEXCLEAR, 3);
+
/* enable GPIO based wakeup */
alchemy_gpio1_input_enable();
/* ...and now the sandman can come! */
au_sleep();
+
+ /* restore CPLD regs */
+ for (i = BCSR_STATUS; i <= BCSR_SYSTEM; i++)
+ bcsr_write(i, bcsrs[i]);
+
+ /* restore CPLD int registers */
+ if (hasint) {
+ bcsr_write(BCSR_INTCLR, 0xffff);
+ bcsr_write(BCSR_MASKCLR, 0xffff);
+ bcsr_write(BCSR_INTSTAT, 0xffff);
+ bcsr_write(BCSR_INTSET, bcsrs[BCSR_INTSET]);
+ bcsr_write(BCSR_MASKSET, bcsrs[BCSR_MASKSET]);
+ }
+
+ /* light up hexleds */
+ bcsr_write(BCSR_HEXCLEAR, 0);
+
return 0;
}
strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
+
+void prom_putchar(unsigned char c)
+{
+ alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}
# Makefile for 4G Systems MTX-1 board.
#
-lib-y := init.o board_setup.o irqmap.o
+lib-y := init.o board_setup.o
obj-y := platform.o
EXTRA_CFLAGS += -Werror
#include <linux/gpio.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
+char irq_tab_alchemy[][5] __initdata = {
+ [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+ [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+ [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+ [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+ [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
int mtx1_pci_idsel(unsigned int devsel, int assert);
-void board_reset(void)
+static void mtx1_reset(char *c)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
}
-void __init board_setup(void)
+static void mtx1_power_off(void)
{
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- char *argptr;
- argptr = prom_getcmdline();
- argptr = strstr(argptr, "console=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
-#endif
+ printk(KERN_ALERT "It's now safe to remove power\n");
+ while (1)
+ asm volatile (".set mips3 ; wait ; .set mips1");
+}
+void __init board_setup(void)
+{
alchemy_gpio2_enable();
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
alchemy_gpio_direction_output(211, 1); /* green on */
alchemy_gpio_direction_output(212, 0); /* red off */
+ pm_power_off = mtx1_power_off;
+ _machine_halt = mtx1_power_off;
+ _machine_restart = mtx1_reset;
+
printk(KERN_INFO "4G Systems MTX-1 Board\n");
}
au_sync_udelay(1);
return 1;
}
+
+static int __init mtx1_init_irq(void)
+{
+ set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
+ set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
+
+ return 0;
+}
+arch_initcall(mtx1_init_irq);
#include <linux/init.h>
#include <asm/bootinfo.h>
+#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
+
+void prom_putchar(unsigned char c)
+{
+ alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}
+++ /dev/null
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/mach-au1x00/au1000.h>
-
-char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
- [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
- [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
- [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
- [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
- { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
- { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
- { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
- { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
-};
-
-
-void __init board_init_irq(void)
-{
- au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}
# Makefile for MyCable XXS1500 board.
#
-lib-y := init.o board_setup.o irqmap.o
+lib-y := init.o board_setup.o platform.o
+
+EXTRA_CFLAGS += -Werror
#include <linux/gpio.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
-void board_reset(void)
+static void xxs1500_reset(char *c)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
}
+static void xxs1500_power_off(void)
+{
+ printk(KERN_ALERT "It's now safe to remove power\n");
+ while (1)
+ asm volatile (".set mips3 ; wait ; .set mips1");
+}
+
void __init board_setup(void)
{
u32 pin_func;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
- char *argptr;
- argptr = prom_getcmdline();
- argptr = strstr(argptr, "console=");
- if (argptr == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS0,115200");
- }
-#endif
+ pm_power_off = xxs1500_power_off;
+ _machine_halt = xxs1500_power_off;
+ _machine_restart = xxs1500_reset;
alchemy_gpio1_input_enable();
alchemy_gpio2_enable();
/* Enable DTR = USB power up */
au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
-#ifdef CONFIG_PCMCIA_XXS1500
- /* GPIO 0, 1, and 4 are inputs */
- alchemy_gpio_direction_input(0);
- alchemy_gpio_direction_input(1);
- alchemy_gpio_direction_input(4);
-
- /* GPIO2 208/9/10/11 are inputs */
- alchemy_gpio_direction_input(208);
- alchemy_gpio_direction_input(209);
- alchemy_gpio_direction_input(210);
- alchemy_gpio_direction_input(211);
-
- /* Turn off power */
- alchemy_gpio_direction_output(214, 0);
-#endif
-
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#endif
#endif
}
+
+static int __init xxs1500_init_irq(void)
+{
+ set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
+ set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW);
+
+ set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */
+ set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW);
+
+ return 0;
+}
+arch_initcall(xxs1500_init_irq);
#include <linux/kernel.h>
#include <asm/bootinfo.h>
+#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
+
+void prom_putchar(unsigned char c)
+{
+ alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}
+++ /dev/null
-/*
- * BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- * dan@embeddededge.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/mach-au1x00/au1000.h>
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
- { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
- { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
- { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
- { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
- { AU1500_GPIO_207, IRQF_TRIGGER_LOW, 0 },
-
- { AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
- { AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
- { AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 },
- { AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 },
- { AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* CF interrupt */
- { AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 },
-};
-
-void __init board_init_irq(void)
-{
- au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}
--- /dev/null
+/*
+ * XXS1500 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+static struct resource xxs1500_pcmcia_res[] = {
+ {
+ .name = "pcmcia-io",
+ .flags = IORESOURCE_MEM,
+ .start = PCMCIA_IO_PHYS_ADDR,
+ .end = PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
+ },
+ {
+ .name = "pcmcia-attr",
+ .flags = IORESOURCE_MEM,
+ .start = PCMCIA_ATTR_PHYS_ADDR,
+ .end = PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ },
+ {
+ .name = "pcmcia-mem",
+ .flags = IORESOURCE_MEM,
+ .start = PCMCIA_MEM_PHYS_ADDR,
+ .end = PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ },
+};
+
+static struct platform_device xxs1500_pcmcia_dev = {
+ .name = "xxs1500_pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(xxs1500_pcmcia_res),
+ .resource = xxs1500_pcmcia_res,
+};
+
+static struct platform_device *xxs1500_devs[] __initdata = {
+ &xxs1500_pcmcia_dev,
+};
+
+static int __init xxs1500_dev_init(void)
+{
+ return platform_add_devices(xxs1500_devs,
+ ARRAY_SIZE(xxs1500_devs));
+}
+device_initcall(xxs1500_dev_init);
/*
* Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/delay.h>
#include <linux/gcd.h>
#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
#include <asm/addrspace.h>
#include <asm/mach-ar7/ar7.h>
struct tnetd7200_clock usb;
};
-int ar7_cpu_clock = 150000000;
-EXPORT_SYMBOL(ar7_cpu_clock);
-int ar7_bus_clock = 125000000;
-EXPORT_SYMBOL(ar7_bus_clock);
-int ar7_dsp_clock;
-EXPORT_SYMBOL(ar7_dsp_clock);
+static struct clk bus_clk = {
+ .rate = 125000000,
+};
+
+static struct clk cpu_clk = {
+ .rate = 150000000,
+};
+
+static struct clk dsp_clk;
+static struct clk vbus_clk;
static void approximate(int base, int target, int *prediv,
int *postdiv, int *mul)
base_clock = AR7_XTAL_CLOCK;
break;
case BOOT_PLL_SOURCE_CPU:
- base_clock = ar7_cpu_clock;
+ base_clock = cpu_clk.rate;
break;
}
u32 *bootcr, u32 frequency)
{
int prediv, postdiv, mul;
- int base_clock = ar7_bus_clock;
+ int base_clock = bus_clk.rate;
switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
case BOOT_PLL_SOURCE_BUS:
- base_clock = ar7_bus_clock;
+ base_clock = bus_clk.rate;
break;
case BOOT_PLL_SOURCE_REF:
base_clock = AR7_REF_CLOCK;
base_clock = AR7_XTAL_CLOCK;
break;
case BOOT_PLL_SOURCE_CPU:
- base_clock = ar7_cpu_clock;
+ base_clock = cpu_clk.rate;
break;
}
ioremap_nocache(UR8_REGS_CLOCKS,
sizeof(struct tnetd7300_clocks));
- ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
+ bus_clk.rate = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
&clocks->bus, bootcr, AR7_AFE_CLOCK);
if (*bootcr & BOOT_PLL_ASYNC_MODE)
- ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
+ cpu_clk.rate = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
&clocks->cpu, bootcr, AR7_AFE_CLOCK);
else
- ar7_cpu_clock = ar7_bus_clock;
+ cpu_clk.rate = bus_clk.rate;
- if (ar7_dsp_clock == 250000000)
+ if (dsp_clk.rate == 250000000)
tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
- bootcr, ar7_dsp_clock);
+ bootcr, dsp_clk.rate);
iounmap(clocks);
iounmap(bootcr);
printk(KERN_INFO "Clocks: Setting DSP clock\n");
calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
&dsp_prediv, &dsp_postdiv, &dsp_mul);
- ar7_bus_clock =
+ bus_clk.rate =
((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
tnetd7200_set_clock(dsp_base, &clocks->dsp,
dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
- ar7_bus_clock);
+ bus_clk.rate);
printk(KERN_INFO "Clocks: Setting CPU clock\n");
calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
&cpu_postdiv, &cpu_mul);
- ar7_cpu_clock =
+ cpu_clk.rate =
((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
tnetd7200_set_clock(cpu_base, &clocks->cpu,
cpu_prediv, cpu_postdiv, -1, cpu_mul,
- ar7_cpu_clock);
+ cpu_clk.rate);
} else
if (*bootcr & BOOT_PLL_2TO1_MODE) {
printk(KERN_INFO "Clocks: Setting CPU clock\n");
calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
&cpu_postdiv, &cpu_mul);
- ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
+ cpu_clk.rate = ((cpu_base / cpu_prediv) * cpu_mul)
/ cpu_postdiv;
tnetd7200_set_clock(cpu_base, &clocks->cpu,
cpu_prediv, cpu_postdiv, -1, cpu_mul,
- ar7_cpu_clock);
+ cpu_clk.rate);
printk(KERN_INFO "Clocks: Setting DSP clock\n");
calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
&dsp_postdiv, &dsp_mul);
- ar7_bus_clock = ar7_cpu_clock / 2;
+ bus_clk.rate = cpu_clk.rate / 2;
tnetd7200_set_clock(dsp_base, &clocks->dsp,
dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
- dsp_mul * 2, ar7_bus_clock);
+ dsp_mul * 2, bus_clk.rate);
} else {
printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
printk(KERN_INFO "Clocks: Setting DSP clock\n");
calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
&dsp_postdiv, &dsp_mul);
- ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
+ bus_clk.rate = ((dsp_base / dsp_prediv) * dsp_mul)
/ dsp_postdiv;
tnetd7200_set_clock(dsp_base, &clocks->dsp,
dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
- dsp_mul * 2, ar7_bus_clock);
+ dsp_mul * 2, bus_clk.rate);
- ar7_cpu_clock = ar7_bus_clock;
+ cpu_clk.rate = bus_clk.rate;
}
printk(KERN_INFO "Clocks: Setting USB clock\n");
- usb_base = ar7_bus_clock;
+ usb_base = bus_clk.rate;
calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
&usb_postdiv, &usb_mul);
tnetd7200_set_clock(usb_base, &clocks->usb,
usb_prediv, usb_postdiv, -1, usb_mul,
TNETD7200_DEF_USB_CLK);
- ar7_dsp_clock = ar7_cpu_clock;
+ dsp_clk.rate = cpu_clk.rate;
iounmap(clocks);
iounmap(bootcr);
}
+/*
+ * Linux clock API
+ */
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ if (!strcmp(id, "bus"))
+ return &bus_clk;
+ /* cpmac and vbus share the same rate */
+ if (!strcmp(id, "cpmac"))
+ return &vbus_clk;
+ if (!strcmp(id, "cpu"))
+ return &cpu_clk;
+ if (!strcmp(id, "dsp"));
+ return &dsp_clk;
+ if (!strcmp(id, "vbus"))
+ return &vbus_clk;
+ return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
int __init ar7_init_clocks(void)
{
switch (ar7_chip_id()) {
tnetd7200_init_clocks();
break;
case AR7_CHIP_7300:
- ar7_dsp_clock = tnetd7300_dsp_clock();
+ dsp_clk.rate = tnetd7300_dsp_clock();
tnetd7300_init_clocks();
break;
default:
break;
}
+ /* adjust vbus clock rate */
+ vbus_clk.rate = bus_clk.rate / 2;
return 0;
}
/*
* Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
*/
#include <linux/module.h>
+#include <linux/gpio.h>
#include <asm/mach-ar7/gpio.h>
-static const char *ar7_gpio_list[AR7_GPIO_MAX];
+struct ar7_gpio_chip {
+ void __iomem *regs;
+ struct gpio_chip chip;
+};
-int gpio_request(unsigned gpio, const char *label)
+static int ar7_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
- if (gpio >= AR7_GPIO_MAX)
- return -EINVAL;
+ struct ar7_gpio_chip *gpch =
+ container_of(chip, struct ar7_gpio_chip, chip);
+ void __iomem *gpio_in = gpch->regs + AR7_GPIO_INPUT;
- if (ar7_gpio_list[gpio])
- return -EBUSY;
+ return readl(gpio_in) & (1 << gpio);
+}
+
+static void ar7_gpio_set_value(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ struct ar7_gpio_chip *gpch =
+ container_of(chip, struct ar7_gpio_chip, chip);
+ void __iomem *gpio_out = gpch->regs + AR7_GPIO_OUTPUT;
+ unsigned tmp;
+
+ tmp = readl(gpio_out) & ~(1 << gpio);
+ if (value)
+ tmp |= 1 << gpio;
+ writel(tmp, gpio_out);
+}
+
+static int ar7_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ar7_gpio_chip *gpch =
+ container_of(chip, struct ar7_gpio_chip, chip);
+ void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR;
- if (label)
- ar7_gpio_list[gpio] = label;
- else
- ar7_gpio_list[gpio] = "busy";
+ writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
return 0;
}
-EXPORT_SYMBOL(gpio_request);
-void gpio_free(unsigned gpio)
+static int ar7_gpio_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int value)
{
- BUG_ON(!ar7_gpio_list[gpio]);
- ar7_gpio_list[gpio] = NULL;
+ struct ar7_gpio_chip *gpch =
+ container_of(chip, struct ar7_gpio_chip, chip);
+ void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR;
+
+ ar7_gpio_set_value(chip, gpio, value);
+ writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
+
+ return 0;
+}
+
+static struct ar7_gpio_chip ar7_gpio_chip = {
+ .chip = {
+ .label = "ar7-gpio",
+ .direction_input = ar7_gpio_direction_input,
+ .direction_output = ar7_gpio_direction_output,
+ .set = ar7_gpio_set_value,
+ .get = ar7_gpio_get_value,
+ .base = 0,
+ .ngpio = AR7_GPIO_MAX,
+ }
+};
+
+int ar7_gpio_enable(unsigned gpio)
+{
+ void __iomem *gpio_en = ar7_gpio_chip.regs + AR7_GPIO_ENABLE;
+
+ writel(readl(gpio_en) | (1 << gpio), gpio_en);
+
+ return 0;
+}
+EXPORT_SYMBOL(ar7_gpio_enable);
+
+int ar7_gpio_disable(unsigned gpio)
+{
+ void __iomem *gpio_en = ar7_gpio_chip.regs + AR7_GPIO_ENABLE;
+
+ writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
+
+ return 0;
+}
+EXPORT_SYMBOL(ar7_gpio_disable);
+
+static int __init ar7_gpio_init(void)
+{
+ int ret;
+
+ ar7_gpio_chip.regs = ioremap_nocache(AR7_REGS_GPIO,
+ AR7_REGS_GPIO + 0x10);
+
+ if (!ar7_gpio_chip.regs) {
+ printk(KERN_ERR "ar7-gpio: failed to ioremap regs\n");
+ return -ENOMEM;
+ }
+
+ ret = gpiochip_add(&ar7_gpio_chip.chip);
+ if (ret) {
+ printk(KERN_ERR "ar7-gpio: failed to add gpiochip\n");
+ return ret;
+ }
+ printk(KERN_INFO "ar7-gpio: registered %d GPIOs\n",
+ ar7_gpio_chip.chip.ngpio);
+ return ret;
}
-EXPORT_SYMBOL(gpio_free);
+arch_initcall(ar7_gpio_init);
unsigned long pages;
pages = memsize() >> PAGE_SHIFT;
- add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT,
- BOOT_MEM_RAM);
+ add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT, BOOT_MEM_RAM);
}
void __init prom_free_prom_memory(void)
#include <linux/etherdevice.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
#include <asm/addrspace.h>
#include <asm/mach-ar7/ar7.h>
#include <asm/mach-ar7/gpio.h>
#include <asm/mach-ar7/prom.h>
+/*****************************************************************************
+ * VLYNQ Bus
+ ****************************************************************************/
struct plat_vlynq_data {
struct plat_vlynq_ops ops;
int gpio_bit;
int reset_bit;
};
-
static int vlynq_on(struct vlynq_device *dev)
{
- int result;
+ int ret;
struct plat_vlynq_data *pdata = dev->dev.platform_data;
- result = gpio_request(pdata->gpio_bit, "vlynq");
- if (result)
+ ret = gpio_request(pdata->gpio_bit, "vlynq");
+ if (ret)
goto out;
ar7_device_reset(pdata->reset_bit);
- result = ar7_gpio_disable(pdata->gpio_bit);
- if (result)
+ ret = ar7_gpio_disable(pdata->gpio_bit);
+ if (ret)
goto out_enabled;
- result = ar7_gpio_enable(pdata->gpio_bit);
- if (result)
+ ret = ar7_gpio_enable(pdata->gpio_bit);
+ if (ret)
goto out_enabled;
- result = gpio_direction_output(pdata->gpio_bit, 0);
- if (result)
+ ret = gpio_direction_output(pdata->gpio_bit, 0);
+ if (ret)
goto out_gpio_enabled;
msleep(50);
gpio_set_value(pdata->gpio_bit, 1);
+
msleep(50);
return 0;
ar7_device_disable(pdata->reset_bit);
gpio_free(pdata->gpio_bit);
out:
- return result;
+ return ret;
}
static void vlynq_off(struct vlynq_device *dev)
{
struct plat_vlynq_data *pdata = dev->dev.platform_data;
+
ar7_gpio_disable(pdata->gpio_bit);
gpio_free(pdata->gpio_bit);
ar7_device_disable(pdata->reset_bit);
}
-static struct resource physmap_flash_resource = {
- .name = "mem",
- .flags = IORESOURCE_MEM,
- .start = 0x10000000,
- .end = 0x107fffff,
-};
-
-static struct resource cpmac_low_res[] = {
+static struct resource vlynq_low_res[] = {
{
- .name = "regs",
- .flags = IORESOURCE_MEM,
- .start = AR7_REGS_MAC0,
- .end = AR7_REGS_MAC0 + 0x7ff,
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_VLYNQ0,
+ .end = AR7_REGS_VLYNQ0 + 0xff,
},
{
- .name = "irq",
- .flags = IORESOURCE_IRQ,
- .start = 27,
- .end = 27,
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 29,
+ .end = 29,
},
-};
-
-static struct resource cpmac_high_res[] = {
{
- .name = "regs",
- .flags = IORESOURCE_MEM,
- .start = AR7_REGS_MAC1,
- .end = AR7_REGS_MAC1 + 0x7ff,
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x04000000,
+ .end = 0x04ffffff,
},
{
- .name = "irq",
- .flags = IORESOURCE_IRQ,
- .start = 41,
- .end = 41,
+ .name = "devirq",
+ .flags = IORESOURCE_IRQ,
+ .start = 80,
+ .end = 111,
},
};
-static struct resource vlynq_low_res[] = {
+static struct resource vlynq_high_res[] = {
{
- .name = "regs",
- .flags = IORESOURCE_MEM,
- .start = AR7_REGS_VLYNQ0,
- .end = AR7_REGS_VLYNQ0 + 0xff,
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_VLYNQ1,
+ .end = AR7_REGS_VLYNQ1 + 0xff,
},
{
- .name = "irq",
- .flags = IORESOURCE_IRQ,
- .start = 29,
- .end = 29,
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 33,
+ .end = 33,
},
{
- .name = "mem",
- .flags = IORESOURCE_MEM,
- .start = 0x04000000,
- .end = 0x04ffffff,
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x0c000000,
+ .end = 0x0cffffff,
},
{
- .name = "devirq",
- .flags = IORESOURCE_IRQ,
- .start = 80,
- .end = 111,
+ .name = "devirq",
+ .flags = IORESOURCE_IRQ,
+ .start = 112,
+ .end = 143,
},
};
-static struct resource vlynq_high_res[] = {
- {
- .name = "regs",
- .flags = IORESOURCE_MEM,
- .start = AR7_REGS_VLYNQ1,
- .end = AR7_REGS_VLYNQ1 + 0xff,
+static struct plat_vlynq_data vlynq_low_data = {
+ .ops = {
+ .on = vlynq_on,
+ .off = vlynq_off,
},
- {
- .name = "irq",
- .flags = IORESOURCE_IRQ,
- .start = 33,
- .end = 33,
+ .reset_bit = 20,
+ .gpio_bit = 18,
+};
+
+static struct plat_vlynq_data vlynq_high_data = {
+ .ops = {
+ .on = vlynq_on,
+ .off = vlynq_off,
},
- {
- .name = "mem",
- .flags = IORESOURCE_MEM,
- .start = 0x0c000000,
- .end = 0x0cffffff,
+ .reset_bit = 26,
+ .gpio_bit = 19,
+};
+
+static struct platform_device vlynq_low = {
+ .id = 0,
+ .name = "vlynq",
+ .dev = {
+ .platform_data = &vlynq_low_data,
},
- {
- .name = "devirq",
- .flags = IORESOURCE_IRQ,
- .start = 112,
- .end = 143,
+ .resource = vlynq_low_res,
+ .num_resources = ARRAY_SIZE(vlynq_low_res),
+};
+
+static struct platform_device vlynq_high = {
+ .id = 1,
+ .name = "vlynq",
+ .dev = {
+ .platform_data = &vlynq_high_data,
},
+ .resource = vlynq_high_res,
+ .num_resources = ARRAY_SIZE(vlynq_high_res),
};
-static struct resource usb_res[] = {
- {
- .name = "regs",
- .flags = IORESOURCE_MEM,
- .start = AR7_REGS_USB,
- .end = AR7_REGS_USB + 0xff,
+/*****************************************************************************
+ * Flash
+ ****************************************************************************/
+static struct resource physmap_flash_resource = {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x10000000,
+ .end = 0x107fffff,
+};
+
+static struct physmap_flash_data physmap_flash_data = {
+ .width = 2,
+};
+
+static struct platform_device physmap_flash = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &physmap_flash_data,
},
+ .resource = &physmap_flash_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct resource cpmac_low_res[] = {
{
- .name = "irq",
- .flags = IORESOURCE_IRQ,
- .start = 32,
- .end = 32,
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_MAC0,
+ .end = AR7_REGS_MAC0 + 0x7ff,
},
{
- .name = "mem",
- .flags = IORESOURCE_MEM,
- .start = 0x03400000,
- .end = 0x03401fff,
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 27,
+ .end = 27,
},
};
-static struct physmap_flash_data physmap_flash_data = {
- .width = 2,
+static struct resource cpmac_high_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_MAC1,
+ .end = AR7_REGS_MAC1 + 0x7ff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 41,
+ .end = 41,
+ },
};
static struct fixed_phy_status fixed_phy_status __initdata = {
- .link = 1,
- .speed = 100,
- .duplex = 1,
+ .link = 1,
+ .speed = 100,
+ .duplex = 1,
};
static struct plat_cpmac_data cpmac_low_data = {
- .reset_bit = 17,
- .power_bit = 20,
- .phy_mask = 0x80000000,
+ .reset_bit = 17,
+ .power_bit = 20,
+ .phy_mask = 0x80000000,
};
static struct plat_cpmac_data cpmac_high_data = {
- .reset_bit = 21,
- .power_bit = 22,
- .phy_mask = 0x7fffffff,
-};
-
-static struct plat_vlynq_data vlynq_low_data = {
- .ops.on = vlynq_on,
- .ops.off = vlynq_off,
- .reset_bit = 20,
- .gpio_bit = 18,
-};
-
-static struct plat_vlynq_data vlynq_high_data = {
- .ops.on = vlynq_on,
- .ops.off = vlynq_off,
- .reset_bit = 16,
- .gpio_bit = 19,
-};
-
-static struct platform_device physmap_flash = {
- .id = 0,
- .name = "physmap-flash",
- .dev.platform_data = &physmap_flash_data,
- .resource = &physmap_flash_resource,
- .num_resources = 1,
+ .reset_bit = 21,
+ .power_bit = 22,
+ .phy_mask = 0x7fffffff,
};
static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
+
static struct platform_device cpmac_low = {
- .id = 0,
- .name = "cpmac",
+ .id = 0,
+ .name = "cpmac",
.dev = {
- .dma_mask = &cpmac_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &cpmac_low_data,
+ .dma_mask = &cpmac_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &cpmac_low_data,
},
- .resource = cpmac_low_res,
- .num_resources = ARRAY_SIZE(cpmac_low_res),
+ .resource = cpmac_low_res,
+ .num_resources = ARRAY_SIZE(cpmac_low_res),
};
static struct platform_device cpmac_high = {
- .id = 1,
- .name = "cpmac",
+ .id = 1,
+ .name = "cpmac",
.dev = {
- .dma_mask = &cpmac_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &cpmac_high_data,
+ .dma_mask = &cpmac_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &cpmac_high_data,
},
- .resource = cpmac_high_res,
- .num_resources = ARRAY_SIZE(cpmac_high_res),
+ .resource = cpmac_high_res,
+ .num_resources = ARRAY_SIZE(cpmac_high_res),
};
-static struct platform_device vlynq_low = {
- .id = 0,
- .name = "vlynq",
- .dev.platform_data = &vlynq_low_data,
- .resource = vlynq_low_res,
- .num_resources = ARRAY_SIZE(vlynq_low_res),
-};
+static inline unsigned char char2hex(char h)
+{
+ switch (h) {
+ case '0': case '1': case '2': case '3': case '4':
+ case '5': case '6': case '7': case '8': case '9':
+ return h - '0';
+ case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
+ return h - 'A' + 10;
+ case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
+ return h - 'a' + 10;
+ default:
+ return 0;
+ }
+}
-static struct platform_device vlynq_high = {
- .id = 1,
- .name = "vlynq",
- .dev.platform_data = &vlynq_high_data,
- .resource = vlynq_high_res,
- .num_resources = ARRAY_SIZE(vlynq_high_res),
+static void cpmac_get_mac(int instance, unsigned char *dev_addr)
+{
+ int i;
+ char name[5], default_mac[ETH_ALEN], *mac;
+
+ mac = NULL;
+ sprintf(name, "mac%c", 'a' + instance);
+ mac = prom_getenv(name);
+ if (!mac) {
+ sprintf(name, "mac%c", 'a');
+ mac = prom_getenv(name);
+ }
+ if (!mac) {
+ random_ether_addr(default_mac);
+ mac = default_mac;
+ }
+ for (i = 0; i < 6; i++)
+ dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
+ char2hex(mac[i * 3 + 1]);
+}
+
+/*****************************************************************************
+ * USB
+ ****************************************************************************/
+static struct resource usb_res[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = AR7_REGS_USB,
+ .end = AR7_REGS_USB + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 32,
+ .end = 32,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x03400000,
+ .end = 0x03401fff,
+ },
};
+static struct platform_device ar7_udc = {
+ .name = "ar7_udc",
+ .resource = usb_res,
+ .num_resources = ARRAY_SIZE(usb_res),
+};
+/*****************************************************************************
+ * LEDs
+ ****************************************************************************/
static struct gpio_led default_leds[] = {
{
- .name = "status",
- .gpio = 8,
- .active_low = 1,
+ .name = "status",
+ .gpio = 8,
+ .active_low = 1,
},
};
static struct gpio_led dsl502t_leds[] = {
{
- .name = "status",
- .gpio = 9,
- .active_low = 1,
+ .name = "status",
+ .gpio = 9,
+ .active_low = 1,
},
{
- .name = "ethernet",
- .gpio = 7,
- .active_low = 1,
+ .name = "ethernet",
+ .gpio = 7,
+ .active_low = 1,
},
{
- .name = "usb",
- .gpio = 12,
- .active_low = 1,
+ .name = "usb",
+ .gpio = 12,
+ .active_low = 1,
},
};
static struct gpio_led dg834g_leds[] = {
{
- .name = "ppp",
- .gpio = 6,
- .active_low = 1,
+ .name = "ppp",
+ .gpio = 6,
+ .active_low = 1,
},
{
- .name = "status",
- .gpio = 7,
- .active_low = 1,
+ .name = "status",
+ .gpio = 7,
+ .active_low = 1,
},
{
- .name = "adsl",
- .gpio = 8,
- .active_low = 1,
+ .name = "adsl",
+ .gpio = 8,
+ .active_low = 1,
},
{
- .name = "wifi",
- .gpio = 12,
- .active_low = 1,
+ .name = "wifi",
+ .gpio = 12,
+ .active_low = 1,
},
{
- .name = "power",
- .gpio = 14,
- .active_low = 1,
- .default_trigger = "default-on",
+ .name = "power",
+ .gpio = 14,
+ .active_low = 1,
+ .default_trigger = "default-on",
},
};
static struct gpio_led fb_sl_leds[] = {
{
- .name = "1",
- .gpio = 7,
+ .name = "1",
+ .gpio = 7,
},
{
- .name = "2",
- .gpio = 13,
- .active_low = 1,
+ .name = "2",
+ .gpio = 13,
+ .active_low = 1,
},
{
- .name = "3",
- .gpio = 10,
- .active_low = 1,
+ .name = "3",
+ .gpio = 10,
+ .active_low = 1,
},
{
- .name = "4",
- .gpio = 12,
- .active_low = 1,
+ .name = "4",
+ .gpio = 12,
+ .active_low = 1,
},
{
- .name = "5",
- .gpio = 9,
- .active_low = 1,
+ .name = "5",
+ .gpio = 9,
+ .active_low = 1,
},
};
static struct gpio_led fb_fon_leds[] = {
{
- .name = "1",
- .gpio = 8,
+ .name = "1",
+ .gpio = 8,
},
{
- .name = "2",
- .gpio = 3,
- .active_low = 1,
+ .name = "2",
+ .gpio = 3,
+ .active_low = 1,
},
{
- .name = "3",
- .gpio = 5,
+ .name = "3",
+ .gpio = 5,
},
{
- .name = "4",
- .gpio = 4,
- .active_low = 1,
+ .name = "4",
+ .gpio = 4,
+ .active_low = 1,
},
{
- .name = "5",
- .gpio = 11,
- .active_low = 1,
+ .name = "5",
+ .gpio = 11,
+ .active_low = 1,
},
};
static struct platform_device ar7_gpio_leds = {
.name = "leds-gpio",
- .id = -1,
.dev = {
.platform_data = &ar7_led_data,
}
};
-static struct platform_device ar7_udc = {
- .id = -1,
- .name = "ar7_udc",
- .resource = usb_res,
- .num_resources = ARRAY_SIZE(usb_res),
-};
-
-static struct resource ar7_wdt_res = {
- .name = "regs",
- .start = -1, /* Filled at runtime */
- .end = -1, /* Filled at runtime */
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ar7_wdt = {
- .id = -1,
- .name = "ar7_wdt",
- .resource = &ar7_wdt_res,
- .num_resources = 1,
-};
-
-static inline unsigned char char2hex(char h)
-{
- switch (h) {
- case '0': case '1': case '2': case '3': case '4':
- case '5': case '6': case '7': case '8': case '9':
- return h - '0';
- case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
- return h - 'A' + 10;
- case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
- return h - 'a' + 10;
- default:
- return 0;
- }
-}
-
-static void cpmac_get_mac(int instance, unsigned char *dev_addr)
-{
- int i;
- char name[5], default_mac[ETH_ALEN], *mac;
-
- mac = NULL;
- sprintf(name, "mac%c", 'a' + instance);
- mac = prom_getenv(name);
- if (!mac) {
- sprintf(name, "mac%c", 'a');
- mac = prom_getenv(name);
- }
- if (!mac) {
- random_ether_addr(default_mac);
- mac = default_mac;
- }
- for (i = 0; i < 6; i++)
- dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
- char2hex(mac[i * 3 + 1]);
-}
-
static void __init detect_leds(void)
{
char *prid, *usb_prod;
}
}
-static int __init ar7_register_devices(void)
+/*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+static struct resource ar7_wdt_res = {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = -1, /* Filled at runtime */
+ .end = -1, /* Filled at runtime */
+};
+
+static struct platform_device ar7_wdt = {
+ .name = "ar7_wdt",
+ .resource = &ar7_wdt_res,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * Init
+ ****************************************************************************/
+static int __init ar7_register_uarts(void)
{
- u16 chip_id;
- int res;
- u32 *bootcr, val;
#ifdef CONFIG_SERIAL_8250
- static struct uart_port uart_port[2] __initdata;
-
- memset(uart_port, 0, sizeof(struct uart_port) * 2);
-
- uart_port[0].type = PORT_16550A;
- uart_port[0].line = 0;
- uart_port[0].irq = AR7_IRQ_UART0;
- uart_port[0].uartclk = ar7_bus_freq() / 2;
- uart_port[0].iotype = UPIO_MEM32;
- uart_port[0].mapbase = AR7_REGS_UART0;
- uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
- uart_port[0].regshift = 2;
- res = early_serial_setup(&uart_port[0]);
+ static struct uart_port uart_port __initdata;
+ struct clk *bus_clk;
+ int res;
+
+ memset(&uart_port, 0, sizeof(struct uart_port));
+
+ bus_clk = clk_get(NULL, "bus");
+ if (IS_ERR(bus_clk))
+ panic("unable to get bus clk\n");
+
+ uart_port.type = PORT_16550A;
+ uart_port.uartclk = clk_get_rate(bus_clk) / 2;
+ uart_port.iotype = UPIO_MEM32;
+ uart_port.regshift = 2;
+
+ uart_port.line = 0;
+ uart_port.irq = AR7_IRQ_UART0;
+ uart_port.mapbase = AR7_REGS_UART0;
+ uart_port.membase = ioremap(uart_port.mapbase, 256);
+
+ res = early_serial_setup(&uart_port);
if (res)
return res;
-
/* Only TNETD73xx have a second serial port */
if (ar7_has_second_uart()) {
- uart_port[1].type = PORT_16550A;
- uart_port[1].line = 1;
- uart_port[1].irq = AR7_IRQ_UART1;
- uart_port[1].uartclk = ar7_bus_freq() / 2;
- uart_port[1].iotype = UPIO_MEM32;
- uart_port[1].mapbase = UR8_REGS_UART1;
- uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
- uart_port[1].regshift = 2;
- res = early_serial_setup(&uart_port[1]);
+ uart_port.line = 1;
+ uart_port.irq = AR7_IRQ_UART1;
+ uart_port.mapbase = UR8_REGS_UART1;
+ uart_port.membase = ioremap(uart_port.mapbase, 256);
+
+ res = early_serial_setup(&uart_port);
if (res)
return res;
}
-#endif /* CONFIG_SERIAL_8250 */
+#endif
+
+ return 0;
+}
+
+static int __init ar7_register_devices(void)
+{
+ void __iomem *bootcr;
+ u32 val;
+ u16 chip_id;
+ int res;
+
+ res = ar7_register_uarts();
+ if (res)
+ pr_err("unable to setup uart(s): %d\n", res);
+
res = platform_device_register(&physmap_flash);
if (res)
- return res;
+ pr_warning("unable to register physmap-flash: %d\n", res);
ar7_device_disable(vlynq_low_data.reset_bit);
res = platform_device_register(&vlynq_low);
if (res)
- return res;
+ pr_warning("unable to register vlynq-low: %d\n", res);
if (ar7_has_high_vlynq()) {
ar7_device_disable(vlynq_high_data.reset_bit);
res = platform_device_register(&vlynq_high);
if (res)
- return res;
+ pr_warning("unable to register vlynq-high: %d\n", res);
}
if (ar7_has_high_cpmac()) {
- res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
- if (res && res != -ENODEV)
- return res;
- cpmac_get_mac(1, cpmac_high_data.dev_addr);
- res = platform_device_register(&cpmac_high);
- if (res)
- return res;
- } else {
+ if (!res) {
+ cpmac_get_mac(1, cpmac_high_data.dev_addr);
+
+ res = platform_device_register(&cpmac_high);
+ if (res)
+ pr_warning("unable to register cpmac-high: %d\n", res);
+ } else
+ pr_warning("unable to add cpmac-high phy: %d\n", res);
+ } else
cpmac_low_data.phy_mask = 0xffffffff;
- }
res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
- if (res && res != -ENODEV)
- return res;
-
- cpmac_get_mac(0, cpmac_low_data.dev_addr);
- res = platform_device_register(&cpmac_low);
- if (res)
- return res;
+ if (!res) {
+ cpmac_get_mac(0, cpmac_low_data.dev_addr);
+ res = platform_device_register(&cpmac_low);
+ if (res)
+ pr_warning("unable to register cpmac-low: %d\n", res);
+ } else
+ pr_warning("unable to add cpmac-low phy: %d\n", res);
detect_leds();
res = platform_device_register(&ar7_gpio_leds);
if (res)
- return res;
+ pr_warning("unable to register leds: %d\n", res);
res = platform_device_register(&ar7_udc);
-
- chip_id = ar7_chip_id();
- switch (chip_id) {
- case AR7_CHIP_7100:
- case AR7_CHIP_7200:
- ar7_wdt_res.start = AR7_REGS_WDT;
- break;
- case AR7_CHIP_7300:
- ar7_wdt_res.start = UR8_REGS_WDT;
- break;
- default:
- break;
- }
-
- ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
-
- bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
- val = *bootcr;
- iounmap(bootcr);
+ if (res)
+ pr_warning("unable to register usb slave: %d\n", res);
/* Register watchdog only if enabled in hardware */
- if (val & AR7_WDT_HW_ENA)
+ bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
+ val = readl(bootcr);
+ iounmap(bootcr);
+ if (val & AR7_WDT_HW_ENA) {
+ chip_id = ar7_chip_id();
+ switch (chip_id) {
+ case AR7_CHIP_7100:
+ case AR7_CHIP_7200:
+ ar7_wdt_res.start = AR7_REGS_WDT;
+ break;
+ case AR7_CHIP_7300:
+ ar7_wdt_res.start = UR8_REGS_WDT;
+ break;
+ default:
+ break;
+ }
+
+ ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
res = platform_device_register(&ar7_wdt);
+ if (res)
+ pr_warning("unable to register watchdog: %d\n", res);
+ }
- return res;
+ return 0;
}
arch_initcall(ar7_register_devices);
#define MAX_ENTRY 80
struct env_var {
- char *name;
- char *value;
+ char *name;
+ char *value;
};
static struct env_var adam2_env[MAX_ENTRY];
char *prom_getenv(const char *name)
{
int i;
+
for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++)
if (!strcmp(name, adam2_env[i].name))
return adam2_env[i].value;
}
EXPORT_SYMBOL(prom_getenv);
-char * __init prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-
static void __init ar7_init_cmdline(int argc, char *argv[])
{
- char *cp;
- int actr;
-
- actr = 1; /* Always ignore argv[0] */
+ int i;
- cp = &(arcs_cmdline[0]);
- while (actr < argc) {
- strcpy(cp, argv[actr]);
- cp += strlen(argv[actr]);
- *cp++ = ' ';
- actr++;
- }
- if (cp != &(arcs_cmdline[0])) {
- /* get rid of trailing space */
- --cp;
- *cp = '\0';
+ for (i = 1; i < argc; i++) {
+ strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
+ if (i < (argc - 1))
+ strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
}
}
struct psbl_rec {
- u32 psbl_size;
- u32 env_base;
- u32 env_size;
- u32 ffs_base;
- u32 ffs_size;
+ u32 psbl_size;
+ u32 env_base;
+ u32 env_size;
+ u32 ffs_base;
+ u32 ffs_size;
};
static __initdata char psp_env_version[] = "TIENV0.8";
struct psp_env_chunk {
- u8 num;
- u8 ctrl;
- u16 csum;
- u8 len;
- char data[11];
+ u8 num;
+ u8 ctrl;
+ u16 csum;
+ u8 len;
+ char data[11];
} __attribute__ ((packed));
struct psp_var_map_entry {
- u8 num;
- char *value;
+ u8 num;
+ char *value;
};
static struct psp_var_map_entry psp_var_map[] = {
- { 1, "cpufrequency" },
- { 2, "memsize" },
- { 3, "flashsize" },
- { 4, "modetty0" },
- { 5, "modetty1" },
- { 8, "maca" },
- { 9, "macb" },
- { 28, "sysfrequency" },
- { 38, "mipsfrequency" },
+ { 1, "cpufrequency" },
+ { 2, "memsize" },
+ { 3, "flashsize" },
+ { 4, "modetty0" },
+ { 5, "modetty1" },
+ { 8, "maca" },
+ { 9, "macb" },
+ { 28, "sysfrequency" },
+ { 38, "mipsfrequency" },
};
/*
static void __init add_adam2_var(char *name, char *value)
{
int i;
+
for (i = 0; i < MAX_ENTRY; i++) {
if (!adam2_env[i].name) {
adam2_env[i].name = name;
char parity = '\0', bits = '\0', flow = '\0';
char *s, *p;
- if (strstr(prom_getcmdline(), "console="))
+ if (strstr(arcs_cmdline, "console="))
return;
s = prom_getenv("modetty0");
else
sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity,
bits);
- strcat(prom_getcmdline(), console_string);
+ strlcat(arcs_cmdline, console_string, COMMAND_LINE_SIZE);
#endif
}
serial_out(UART_TX, c);
return 1;
}
-
static void ar7_machine_restart(char *command)
{
- u32 *softres_reg = ioremap(AR7_REGS_RESET +
- AR7_RESET_SOFTWARE, 1);
+ u32 *softres_reg = ioremap(AR7_REGS_RESET + AR7_RESET_SOFTWARE, 1);
+
writel(1, softres_reg);
}
{
u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
u32 power_state = readl(power_reg) | (3 << 30);
+
writel(power_state, power_reg);
ar7_machine_halt();
}
{
u16 chip_id = ar7_chip_id();
switch (chip_id) {
- case AR7_CHIP_7300:
- return "TI AR7 (TNETD7300)";
case AR7_CHIP_7100:
return "TI AR7 (TNETD7100)";
case AR7_CHIP_7200:
return "TI AR7 (TNETD7200)";
+ case AR7_CHIP_7300:
+ return "TI AR7 (TNETD7300)";
default:
- return "TI AR7 (Unknown)";
+ return "TI AR7 (unknown)";
}
}
* Initializes basic routines and structures pointers, memory size (as
* given by the bios and saves the command line.
*/
-
void __init plat_mem_setup(void)
{
unsigned long io_base;
prom_meminit();
printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n",
- get_system_type(),
- ar7_chip_id(), ar7_chip_rev());
+ get_system_type(), ar7_chip_id(), ar7_chip_rev());
}
#include <linux/init.h>
#include <linux/time.h>
+#include <linux/err.h>
+#include <linux/clk.h>
#include <asm/time.h>
#include <asm/mach-ar7/ar7.h>
void __init plat_time_init(void)
{
- mips_hpt_frequency = ar7_cpu_freq() / 2;
+ struct clk *cpu_clk;
+
+ cpu_clk = clk_get(NULL, "cpu");
+ if (IS_ERR(cpu_clk)) {
+ printk(KERN_ERR "unable to get cpu clock\n");
+ return;
+ }
+
+ mips_hpt_frequency = clk_get_rate(cpu_clk) / 2;
}
return -EINVAL;
}
EXPORT_SYMBOL_GPL(gpio_to_irq);
-
void __init prom_free_prom_memory(void)
{
}
-
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
}
-
}
module_init(wgt634u_init);
-
#include <bcm63xx_timer.h>
#include <bcm63xx_regs.h>
-static DEFINE_SPINLOCK(timer_reg_lock);
-static DEFINE_SPINLOCK(timer_data_lock);
+static DEFINE_RAW_SPINLOCK(timer_reg_lock);
+static DEFINE_RAW_SPINLOCK(timer_data_lock);
static struct clk *periph_clk;
static struct timer_data {
u32 stat;
int i;
- spin_lock(&timer_reg_lock);
+ raw_spin_lock(&timer_reg_lock);
stat = bcm_timer_readl(TIMER_IRQSTAT_REG);
bcm_timer_writel(stat, TIMER_IRQSTAT_REG);
- spin_unlock(&timer_reg_lock);
+ raw_spin_unlock(&timer_reg_lock);
for (i = 0; i < BCM63XX_TIMER_COUNT; i++) {
if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i)))
continue;
- spin_lock(&timer_data_lock);
+ raw_spin_lock(&timer_data_lock);
if (!timer_data[i].cb) {
- spin_unlock(&timer_data_lock);
+ raw_spin_unlock(&timer_data_lock);
continue;
}
timer_data[i].cb(timer_data[i].data);
- spin_unlock(&timer_data_lock);
+ raw_spin_unlock(&timer_data_lock);
}
return IRQ_HANDLED;
if (id >= BCM63XX_TIMER_COUNT)
return -EINVAL;
- spin_lock_irqsave(&timer_reg_lock, flags);
+ raw_spin_lock_irqsave(&timer_reg_lock, flags);
reg = bcm_timer_readl(TIMER_CTLx_REG(id));
reg |= TIMER_CTL_ENABLE_MASK;
reg |= TIMER_IRQSTAT_TIMER_IR_EN(id);
bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
- spin_unlock_irqrestore(&timer_reg_lock, flags);
+ raw_spin_unlock_irqrestore(&timer_reg_lock, flags);
return 0;
}
if (id >= BCM63XX_TIMER_COUNT)
return -EINVAL;
- spin_lock_irqsave(&timer_reg_lock, flags);
+ raw_spin_lock_irqsave(&timer_reg_lock, flags);
reg = bcm_timer_readl(TIMER_CTLx_REG(id));
reg &= ~TIMER_CTL_ENABLE_MASK;
reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id);
bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
- spin_unlock_irqrestore(&timer_reg_lock, flags);
+ raw_spin_unlock_irqrestore(&timer_reg_lock, flags);
return 0;
}
return -EINVAL;
ret = 0;
- spin_lock_irqsave(&timer_data_lock, flags);
+ raw_spin_lock_irqsave(&timer_data_lock, flags);
if (timer_data[id].cb) {
ret = -EBUSY;
goto out;
timer_data[id].data = data;
out:
- spin_unlock_irqrestore(&timer_data_lock, flags);
+ raw_spin_unlock_irqrestore(&timer_data_lock, flags);
return ret;
}
if (id >= BCM63XX_TIMER_COUNT)
return;
- spin_lock_irqsave(&timer_data_lock, flags);
+ raw_spin_lock_irqsave(&timer_data_lock, flags);
timer_data[id].cb = NULL;
- spin_unlock_irqrestore(&timer_data_lock, flags);
+ raw_spin_unlock_irqrestore(&timer_data_lock, flags);
}
EXPORT_SYMBOL(bcm63xx_timer_unregister);
if (countdown & ~TIMER_CTL_COUNTDOWN_MASK)
return -EINVAL;
- spin_lock_irqsave(&timer_reg_lock, flags);
+ raw_spin_lock_irqsave(&timer_reg_lock, flags);
reg = bcm_timer_readl(TIMER_CTLx_REG(id));
if (monotonic)
reg |= countdown;
bcm_timer_writel(reg, TIMER_CTLx_REG(id));
- spin_unlock_irqrestore(&timer_reg_lock, flags);
+ raw_spin_unlock_irqrestore(&timer_reg_lock, flags);
return 0;
}
# modified by Cort (cort@cs.nmt.edu)
#
# Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University
-# Author: Wu Zhangjin <wuzj@lemote.com>
+# Author: Wu Zhangjin <wuzhangjin@gmail.com>
#
# compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE
KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//")
KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
- -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \
+ -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
- -DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ ) \
- -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE)
+ -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
+ -DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ )
obj-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o
+ifdef CONFIG_DEBUG_ZBOOT
obj-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
+obj-$(CONFIG_MACH_ALCHEMY) += $(obj)/uart-alchemy.o
+endif
OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
$(obj)/vmlinux.bin: $(KBUILD_IMAGE)
* please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you
* need to implement your own putc().
*/
-
+#include <linux/compiler.h>
#include <linux/init.h>
#include <linux/types.h>
-void __attribute__ ((weak)) putc(char c)
+void __weak putc(char c)
{
}
* Author: Matt Porter <mporter@mvista.com> Derived from
* arch/ppc/boot/prep/misc.c
*
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
--- /dev/null
+#include <asm/mach-au1x00/au1000.h>
+
+void putc(char c)
+{
+ /* all current (Jan. 2010) in-kernel boards */
+ alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}
};
#ifdef CONFIG_PCI
-static DEFINE_SPINLOCK(bar1_lock);
+static DEFINE_RAW_SPINLOCK(bar1_lock);
static struct bar1_index_state bar1_state[32];
#endif
start_index = 31;
/* Only one processor can access the Bar register at once */
- spin_lock_irqsave(&bar1_lock, flags);
+ raw_spin_lock_irqsave(&bar1_lock, flags);
/* Look through Bar1 for existing mapping that will work */
for (index = start_index; index >= 0; index--) {
(unsigned long long) physical);
done_unlock:
- spin_unlock_irqrestore(&bar1_lock, flags);
+ raw_spin_unlock_irqrestore(&bar1_lock, flags);
done:
pr_debug("dma_map_single 0x%llx->0x%llx\n", physical, result);
return result;
"Attempt to unmap an invalid address (0x%llx)\n",
dma_addr);
- spin_lock_irqsave(&bar1_lock, flags);
+ raw_spin_lock_irqsave(&bar1_lock, flags);
bar1_state[index].ref_count--;
if (bar1_state[index].ref_count == 0)
octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0);
else if (unlikely(bar1_state[index].ref_count < 0))
panic("dma_unmap_single: Bar1[%u] reference count < 0\n",
(int) index);
- spin_unlock_irqrestore(&bar1_lock, flags);
+ raw_spin_unlock_irqrestore(&bar1_lock, flags);
done:
pr_debug("dma_unmap_single 0x%llx\n", dma_addr);
return;
* impossible requests up front. (NOP for address_min == 0)
*/
if (alignment)
- address_min = __ALIGN_MASK(address_min, (alignment - 1));
+ address_min = ALIGN(address_min, alignment);
/*
* Reject inconsistent args. We have adjusted these, so this
* satisfy request.
*/
usable_base =
- __ALIGN_MASK(max(address_min, ent_addr), alignment - 1);
+ ALIGN(max(address_min, ent_addr), alignment);
usable_max = min(address_max, ent_addr + ent_size);
/*
* We should be able to allocate block at address
* coallesced when they are freed. The alloc routine does the
* same rounding up on all allocations.
*/
- size = __ALIGN_MASK(size, (CVMX_BOOTMEM_ALIGNMENT_SIZE - 1));
+ size = ALIGN(size, CVMX_BOOTMEM_ALIGNMENT_SIZE);
addr_allocated = cvmx_bootmem_phy_alloc(size, min_addr, max_addr,
alignment,
#include <asm/octeon/cvmx-pexp-defs.h>
#include <asm/octeon/cvmx-npi-defs.h>
-DEFINE_RWLOCK(octeon_irq_ciu0_rwlock);
-DEFINE_RWLOCK(octeon_irq_ciu1_rwlock);
-DEFINE_SPINLOCK(octeon_irq_msi_lock);
+static DEFINE_RAW_SPINLOCK(octeon_irq_ciu0_lock);
+static DEFINE_RAW_SPINLOCK(octeon_irq_ciu1_lock);
static int octeon_coreid_for_cpu(int cpu)
{
*/
if (desc->status & IRQ_DISABLED)
return;
-
- /* There is a race here. We should fix it. */
-
/*
* We don't need to disable IRQs to make these atomic since
* they are already disabled earlier in the low level
uint64_t en0;
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
- /*
- * A read lock is used here to make sure only one core is ever
- * updating the CIU enable bits at a time. During an enable
- * the cores don't interfere with each other. During a disable
- * the write lock stops any enables that might cause a
- * problem.
- */
- read_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
+ raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags);
en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
en0 |= 1ull << bit;
cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
- read_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
+ raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags);
}
static void octeon_irq_ciu0_disable(unsigned int irq)
unsigned long flags;
uint64_t en0;
int cpu;
- write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
+ raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags);
for_each_online_cpu(cpu) {
int coreid = octeon_coreid_for_cpu(cpu);
en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
* of them are done.
*/
cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
- write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
+ raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags);
}
/*
* Disable the irq on the current core for chips that have the EN*_W1{S,C}
* registers.
*/
-static void octeon_irq_ciu0_disable_v2(unsigned int irq)
+static void octeon_irq_ciu0_ack_v2(unsigned int irq)
{
int index = cvmx_get_core_num() * 2;
u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask);
}
+/*
+ * CIU timer type interrupts must be acknoleged by writing a '1' bit
+ * to their sum0 bit.
+ */
+static void octeon_irq_ciu0_timer_ack(unsigned int irq)
+{
+ int index = cvmx_get_core_num() * 2;
+ uint64_t mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+ cvmx_write_csr(CVMX_CIU_INTX_SUM0(index), mask);
+}
+
+static void octeon_irq_ciu0_timer_ack_v1(unsigned int irq)
+{
+ octeon_irq_ciu0_timer_ack(irq);
+ octeon_irq_ciu0_ack(irq);
+}
+
+static void octeon_irq_ciu0_timer_ack_v2(unsigned int irq)
+{
+ octeon_irq_ciu0_timer_ack(irq);
+ octeon_irq_ciu0_ack_v2(irq);
+}
+
+/*
+ * Enable the irq on the current core for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static void octeon_irq_ciu0_eoi_v2(unsigned int irq)
+{
+ struct irq_desc *desc = irq_desc + irq;
+ int index = cvmx_get_core_num() * 2;
+ u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+
+ if ((desc->status & IRQ_DISABLED) == 0)
+ cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask);
+}
+
/*
* Disable the irq on the all cores for chips that have the EN*_W1{S,C}
* registers.
unsigned long flags;
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
- write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
+ raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags);
for_each_online_cpu(cpu) {
int coreid = octeon_coreid_for_cpu(cpu);
uint64_t en0 =
* of them are done.
*/
cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
- write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
+ raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags);
return 0;
}
.name = "CIU0",
.enable = octeon_irq_ciu0_enable_v2,
.disable = octeon_irq_ciu0_disable_all_v2,
- .ack = octeon_irq_ciu0_disable_v2,
- .eoi = octeon_irq_ciu0_enable_v2,
+ .ack = octeon_irq_ciu0_ack_v2,
+ .eoi = octeon_irq_ciu0_eoi_v2,
#ifdef CONFIG_SMP
.set_affinity = octeon_irq_ciu0_set_affinity_v2,
#endif
#endif
};
+static struct irq_chip octeon_irq_chip_ciu0_timer_v2 = {
+ .name = "CIU0-T",
+ .enable = octeon_irq_ciu0_enable_v2,
+ .disable = octeon_irq_ciu0_disable_all_v2,
+ .ack = octeon_irq_ciu0_timer_ack_v2,
+ .eoi = octeon_irq_ciu0_eoi_v2,
+#ifdef CONFIG_SMP
+ .set_affinity = octeon_irq_ciu0_set_affinity_v2,
+#endif
+};
+
+static struct irq_chip octeon_irq_chip_ciu0_timer = {
+ .name = "CIU0-T",
+ .enable = octeon_irq_ciu0_enable,
+ .disable = octeon_irq_ciu0_disable,
+ .ack = octeon_irq_ciu0_timer_ack_v1,
+ .eoi = octeon_irq_ciu0_eoi,
+#ifdef CONFIG_SMP
+ .set_affinity = octeon_irq_ciu0_set_affinity,
+#endif
+};
+
static void octeon_irq_ciu1_ack(unsigned int irq)
{
uint64_t en1;
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
- /*
- * A read lock is used here to make sure only one core is ever
- * updating the CIU enable bits at a time. During an enable
- * the cores don't interfere with each other. During a disable
- * the write lock stops any enables that might cause a
- * problem.
- */
- read_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
+ raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags);
en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
en1 |= 1ull << bit;
cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
- read_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
+ raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags);
}
static void octeon_irq_ciu1_disable(unsigned int irq)
unsigned long flags;
uint64_t en1;
int cpu;
- write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
+ raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags);
for_each_online_cpu(cpu) {
int coreid = octeon_coreid_for_cpu(cpu);
en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
* of them are done.
*/
cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
- write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
+ raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags);
}
/*
* Disable the irq on the current core for chips that have the EN*_W1{S,C}
* registers.
*/
-static void octeon_irq_ciu1_disable_v2(unsigned int irq)
+static void octeon_irq_ciu1_ack_v2(unsigned int irq)
{
int index = cvmx_get_core_num() * 2 + 1;
u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask);
}
+/*
+ * Enable the irq on the current core for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static void octeon_irq_ciu1_eoi_v2(unsigned int irq)
+{
+ struct irq_desc *desc = irq_desc + irq;
+ int index = cvmx_get_core_num() * 2 + 1;
+ u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
+
+ if ((desc->status & IRQ_DISABLED) == 0)
+ cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask);
+}
+
/*
* Disable the irq on the all cores for chips that have the EN*_W1{S,C}
* registers.
unsigned long flags;
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
- write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
+ raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags);
for_each_online_cpu(cpu) {
int coreid = octeon_coreid_for_cpu(cpu);
uint64_t en1 =
* of them are done.
*/
cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
- write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
+ raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags);
return 0;
}
.name = "CIU0",
.enable = octeon_irq_ciu1_enable_v2,
.disable = octeon_irq_ciu1_disable_all_v2,
- .ack = octeon_irq_ciu1_disable_v2,
- .eoi = octeon_irq_ciu1_enable_v2,
+ .ack = octeon_irq_ciu1_ack_v2,
+ .eoi = octeon_irq_ciu1_eoi_v2,
#ifdef CONFIG_SMP
.set_affinity = octeon_irq_ciu1_set_affinity_v2,
#endif
#ifdef CONFIG_PCI_MSI
+static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
+
static void octeon_irq_msi_ack(unsigned int irq)
{
if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
*/
uint64_t en;
unsigned long flags;
- spin_lock_irqsave(&octeon_irq_msi_lock, flags);
+ raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags);
en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
en |= 1ull << (irq - OCTEON_IRQ_MSI_BIT0);
cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
- spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
+ raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
}
}
*/
uint64_t en;
unsigned long flags;
- spin_lock_irqsave(&octeon_irq_msi_lock, flags);
+ raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags);
en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
en &= ~(1ull << (irq - OCTEON_IRQ_MSI_BIT0));
cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
- spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
+ raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
}
}
{
int irq;
struct irq_chip *chip0;
+ struct irq_chip *chip0_timer;
struct irq_chip *chip1;
#ifdef CONFIG_SMP
OCTEON_IS_MODEL(OCTEON_CN56XX_PASS2_X) ||
OCTEON_IS_MODEL(OCTEON_CN52XX_PASS2_X)) {
chip0 = &octeon_irq_chip_ciu0_v2;
+ chip0_timer = &octeon_irq_chip_ciu0_timer_v2;
chip1 = &octeon_irq_chip_ciu1_v2;
} else {
chip0 = &octeon_irq_chip_ciu0;
+ chip0_timer = &octeon_irq_chip_ciu0_timer;
chip1 = &octeon_irq_chip_ciu1;
}
/* 24 - 87 CIU_INT_SUM0 */
for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_BOOTDMA; irq++) {
- set_irq_chip_and_handler(irq, chip0, handle_percpu_irq);
+ switch (irq) {
+ case OCTEON_IRQ_GMX_DRP0:
+ case OCTEON_IRQ_GMX_DRP1:
+ case OCTEON_IRQ_IPD_DRP:
+ case OCTEON_IRQ_KEY_ZERO:
+ case OCTEON_IRQ_TIMER0:
+ case OCTEON_IRQ_TIMER1:
+ case OCTEON_IRQ_TIMER2:
+ case OCTEON_IRQ_TIMER3:
+ set_irq_chip_and_handler(irq, chip0_timer, handle_percpu_irq);
+ break;
+ default:
+ set_irq_chip_and_handler(irq, chip0, handle_percpu_irq);
+ break;
+ }
}
/* 88 - 151 CIU_INT_SUM1 */
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/platform_device.h>
}
device_initcall(octeon_rng_device_init);
+static struct i2c_board_info __initdata octeon_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+};
+
+static int __init octeon_i2c_devices_init(void)
+{
+ return i2c_register_board_info(0, octeon_i2c_devices,
+ ARRAY_SIZE(octeon_i2c_devices));
+}
+arch_initcall(octeon_i2c_devices_init);
+
+#define OCTEON_I2C_IO_BASE 0x1180000001000ull
+#define OCTEON_I2C_IO_UNIT_OFFSET 0x200
+
+static struct octeon_i2c_data octeon_i2c_data[2];
+
+static int __init octeon_i2c_device_init(void)
+{
+ struct platform_device *pd;
+ int ret = 0;
+ int port, num_ports;
+
+ struct resource i2c_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ,
+ }
+ };
+
+ if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX))
+ num_ports = 2;
+ else
+ num_ports = 1;
+
+ for (port = 0; port < num_ports; port++) {
+ octeon_i2c_data[port].sys_freq = octeon_get_clock_rate();
+ /*FIXME: should be examined. At the moment is set for 100Khz */
+ octeon_i2c_data[port].i2c_freq = 100000;
+
+ pd = platform_device_alloc("i2c-octeon", port);
+ if (!pd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ pd->dev.platform_data = octeon_i2c_data + port;
+
+ i2c_resources[0].start =
+ OCTEON_I2C_IO_BASE + (port * OCTEON_I2C_IO_UNIT_OFFSET);
+ i2c_resources[0].end = i2c_resources[0].start + 0x1f;
+ switch (port) {
+ case 0:
+ i2c_resources[1].start = OCTEON_IRQ_TWSI;
+ i2c_resources[1].end = OCTEON_IRQ_TWSI;
+ break;
+ case 1:
+ i2c_resources[1].start = OCTEON_IRQ_TWSI2;
+ i2c_resources[1].end = OCTEON_IRQ_TWSI2;
+ break;
+ default:
+ BUG();
+ }
+
+ ret = platform_device_add_resources(pd,
+ i2c_resources,
+ ARRAY_SIZE(i2c_resources));
+ if (ret)
+ goto fail;
+
+ ret = platform_device_add(pd);
+ if (ret)
+ goto fail;
+ }
+ return ret;
+fail:
+ platform_device_put(pd);
+out:
+ return ret;
+}
+device_initcall(octeon_i2c_device_init);
+
/* Octeon SMI/MDIO interface. */
static int __init octeon_mdiobus_device_init(void)
{
avail_coremask);
}
- pr_info("Reset core %d. Available Coremask = %x \n", coreid,
+ pr_info("Reset core %d. Available Coremask = %x\n", coreid,
avail_coremask);
cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid);
cvmx_write_csr(CVMX_CIU_PP_RST, 0);
static struct resource cobalt_io_resource = {
.start = 0x1000,
- .end = GT_DEF_PCI0_IO_SIZE - 1,
+ .end = 0xffffffUL,
.name = "PCI I/O",
.flags = IORESOURCE_IO,
};
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:24 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 08:46:14 2010
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-CONFIG_MIPS_DB1000=y
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+CONFIG_MIPS_DB1000=y
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1000=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1000=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPSR1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
#
# Kernel type
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-db1000"
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
#
-# Loadable module support
+# GCOV-based kernel profiling
#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
+# CONFIG_PCMCIA_IOCTL is not set
#
# PC-card bridges
#
# CONFIG_PCMCIA_AU1X00 is not set
-
-#
-# PCI Hotplug Support
-#
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# LPDDR flash memory drivers
#
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
#
-# Plug and Play support
+# UBI - Unsorted block images
#
-# CONFIG_PNPACPI is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
#
-# Block devices
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-
-#
-# Wan interfaces
-#
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
+# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# PCMCIA character devices
#
-CONFIG_SYNCLINK_CS=m
+# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
#
-# Dallas's 1-wire bus
+# PPS support
#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Multimedia devices
+# Sonics Silicon Backplane
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
#
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
#
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
+# Console display driver support
#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
-# USB Gadget Support
+# USB Host Controller Drivers
#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
-# MMC/SD Card support
+# USB Device Class drivers
#
-# CONFIG_MMC is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# LED devices
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
-# CONFIG_NEW_LEDS is not set
#
-# LED drivers
+# also be needed; see USB_STORAGE Help for more info
#
+# CONFIG_USB_LIBUSUAL is not set
#
-# LED Triggers
+# USB Imaging devices
#
+# CONFIG_USB_MDC800 is not set
#
-# InfiniBand support
+# USB port drivers
#
+# CONFIG_USB_SERIAL is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
#
-# Real Time Clock
+# OTG and related infrastructure
#
-# CONFIG_RTC_CLASS is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Auxiliary Display support
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
#
-# Virtualization
+# TI VLYNQ
#
+# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
# Pseudo filesystems
#
CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
#
# Security options
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:24 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 08:50:15 2010
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-CONFIG_MIPS_DB1100=y
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+CONFIG_MIPS_DB1100=y
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1100=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1100=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPSR1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
#
# Kernel type
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-db1100"
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
#
-# Loadable module support
+# GCOV-based kernel profiling
#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_MMU=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+# CONFIG_PCMCIA_IOCTL is not set
#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
+# PC-card bridges
#
+# CONFIG_PCMCIA_AU1X00 is not set
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# LPDDR flash memory drivers
#
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
+# UBI - Unsorted block images
#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
#
-# Misc devices
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
#
-# ATA/ATAPI/MFM/RLL support
+# IDE chipset support/bugfixes
#
-# CONFIG_IDE is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
#
# SCSI device support
#
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=m
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
#
-# TPM devices
+# PCMCIA character devices
#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
#
-# Dallas's 1-wire bus
+# PPS support
#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Multimedia devices
+# Sonics Silicon Backplane
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
#
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
#
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_AU1100=y
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
-# USB Gadget Support
+# USB Host Controller Drivers
#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
-# MMC/SD Card support
+# USB Device Class drivers
#
-# CONFIG_MMC is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# LED devices
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
-# CONFIG_NEW_LEDS is not set
#
-# LED drivers
+# also be needed; see USB_STORAGE Help for more info
#
+# CONFIG_USB_LIBUSUAL is not set
#
-# LED Triggers
+# USB Imaging devices
#
+# CONFIG_USB_MDC800 is not set
#
-# InfiniBand support
+# USB port drivers
#
+# CONFIG_USB_SERIAL is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
#
-# Real Time Clock
+# OTG and related infrastructure
#
-# CONFIG_RTC_CLASS is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Auxiliary Display support
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
#
-# Virtualization
+# TI VLYNQ
#
+# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
# Pseudo filesystems
#
CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
#
# Security options
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:25 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 10:18:09 2010
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-CONFIG_MIPS_DB1200=y
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+CONFIG_MIPS_DB1200=y
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1200=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
CONFIG_DMA_COHERENT=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1200=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPSR1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
#
# Kernel type
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-db1200"
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
#
-# Loadable module support
+# GCOV-based kernel profiling
#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
+# CONFIG_PCMCIA_IOCTL is not set
#
# PC-card bridges
#
-CONFIG_PCMCIA_AU1X00=m
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_PCMCIA_AU1X00 is not set
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_AU1550 is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# LPDDR flash memory drivers
#
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_UB=y
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_TASK_IOCTL=y
+# CONFIG_IDE_PROC_FS is not set
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y
# CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set
-CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_MIPS_AU1X00_ENET is not set
-# CONFIG_SMC91X is not set
+CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
#
# Serial drivers
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_AU1X00=y
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
#
-# TPM devices
+# I2C Algorithms
#
-# CONFIG_TCG_TPM is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
#
-# I2C support
+# I2C Hardware Bus support
#
-# CONFIG_I2C is not set
#
-# SPI support
+# I2C system bus drivers (mostly embedded / system-on-chip)
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_I2C_AU1550=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
#
-# Dallas's 1-wire bus
+# External I2C/SMBus adapter drivers
#
-# CONFIG_W1 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
#
-# Hardware Monitoring support
+# Other I2C/SMBus bus drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
-# Multimedia devices
+# Miscellaneous I2C Chip support
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
#
-# Digital Video Broadcasting Devices
+# SPI Master Controller Drivers
#
-# CONFIG_DVB is not set
+CONFIG_SPI_AU1550=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+CONFIG_SENSORS_ADM1025=y
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM70=y
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_AU1200=y
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_AU1XPSC=y
+CONFIG_SND_SOC_AU1XPSC_I2S=y
+CONFIG_SND_SOC_AU1XPSC_AC97=y
+CONFIG_SND_SOC_DB1200=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=y
+CONFIG_SND_SOC_WM8731=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
-# Logo configuration
+# Miscellaneous USB options
#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
-# Sound
+# USB Host Controller Drivers
#
-# CONFIG_SOUND is not set
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
-# HID Devices
+# USB Device Class drivers
#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# USB support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# also be needed; see USB_STORAGE Help for more info
#
+# CONFIG_USB_LIBUSUAL is not set
#
-# USB Gadget Support
+# USB Imaging devices
#
-CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_MDC800 is not set
#
-# MMC/SD Card support
+# USB port drivers
#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_AU1X=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# LED devices
+# MMC/SD/SDIO Card Drivers
#
-# CONFIG_NEW_LEDS is not set
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
-# LED drivers
+# MMC/SD/SDIO Host Controller Drivers
#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AU1X=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
#
-# LED Triggers
+# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
#
-# InfiniBand support
+# LED Triggers
#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# iptables trigger is under Netfilter config (LED target)
#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# Real Time Clock
+# RTC interfaces
#
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Engine support
+# I2C RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
-# DMA Clients
+# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Auxiliary Display support
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
#
-# Virtualization
+# TI VLYNQ
#
+# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
-CONFIG_JFS_FS=y
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=m
+CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
+CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
-# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+CONFIG_NLS_CODEPAGE_1250=y
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="mem=48M"
+CONFIG_CMDLINE="console=ttyS0,115200"
# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
#
# Security options
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:26 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 08:46:33 2010
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-CONFIG_MIPS_DB1500=y
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+CONFIG_MIPS_DB1500=y
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1500=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1500=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPSR1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
#
# Kernel type
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-db1500"
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
#
-# Loadable module support
+# GCOV-based kernel profiling
#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
#
# PC-card bridges
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-CONFIG_PCMCIA_AU1X00=m
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_PCMCIA_AU1X00 is not set
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
+# LPDDR flash memory drivers
#
-# CONFIG_PNPACPI is not set
+# CONFIG_MTD_LPDDR is not set
#
-# Block devices
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+CONFIG_BLK_DEV_HPT366=y
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# You can enable one or both FireWire driver stacks.
#
-# CONFIG_I2O is not set
#
-# Network device support
+# The newer stack is recommended.
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
+# CONFIG_WLAN is not set
#
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_NET_RADIO is not set
#
-# PCMCIA network device support
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_PCI is not set
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
#
# PCMCIA character devices
#
-CONFIG_SYNCLINK_CS=m
+# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
#
-# Dallas's 1-wire bus
+# PPS support
#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Multimedia devices
+# Sonics Silicon Backplane
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
#
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA MIPS devices
-#
-CONFIG_SND_AU1X00=m
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_LIBUSUAL is not set
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-CONFIG_USB_YEALINK=m
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
-CONFIG_USB_LD=m
+# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
+# RTC interfaces
#
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Engine support
+# SPI RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
#
-# DMA Clients
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Devices
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# TI VLYNQ
#
+# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
# Pseudo filesystems
#
CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
#
# Security options
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:27 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 08:58:22 2010
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-CONFIG_MIPS_DB1550=y
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+CONFIG_MIPS_DB1550=y
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1550=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1550=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPSR1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
#
# Kernel type
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-db1550"
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
#
-# Loadable module support
+# GCOV-based kernel profiling
#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
#
# PC-card bridges
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-CONFIG_PCMCIA_AU1X00=m
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_PCMCIA_AU1X00 is not set
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_AU1550=m
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_AU1550=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# LPDDR flash memory drivers
#
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
+# CONFIG_BLK_DEV_LOOP is not set
#
-# ATA/ATAPI/MFM/RLL support
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_UB=y
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_IDECD is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
+CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
-CONFIG_BLK_DEV_IT8213=m
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# You can enable one or both FireWire driver stacks.
#
-# CONFIG_I2O is not set
#
-# Network device support
+# The newer stack is recommended.
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
+# CONFIG_WLAN is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
#
# PCMCIA character devices
#
-CONFIG_SYNCLINK_CS=m
+# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
#
-# TPM devices
+# I2C Algorithms
#
-# CONFIG_TCG_TPM is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
#
-# I2C support
+# I2C Hardware Bus support
#
-# CONFIG_I2C is not set
#
-# SPI support
+# PC SMBus host controller drivers
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
#
-# Dallas's 1-wire bus
+# I2C system bus drivers (mostly embedded / system-on-chip)
#
-# CONFIG_W1 is not set
+CONFIG_I2C_AU1550=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
#
-# Hardware Monitoring support
+# External I2C/SMBus adapter drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
#
-# Multimedia devices
+# Other I2C/SMBus bus drivers
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
-# Digital Video Broadcasting Devices
+# Miscellaneous I2C Chip support
#
-# CONFIG_DVB is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
#
-# Graphics support
+# SPI Master Controller Drivers
#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_SPI_AU1550=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
-# Sound
+# SPI Protocol Masters
#
-# CONFIG_SOUND is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
#
-# HID Devices
+# PPS support
#
-# CONFIG_HID is not set
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# USB support
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_PCMCIA is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AU1XPSC=y
+# CONFIG_SND_SOC_DB1200 is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
-# USB Gadget Support
+# USB Host Controller Drivers
#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
-# MMC/SD Card support
+# USB Device Class drivers
#
-# CONFIG_MMC is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# LED devices
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
-# CONFIG_NEW_LEDS is not set
#
-# LED drivers
+# also be needed; see USB_STORAGE Help for more info
#
+# CONFIG_USB_LIBUSUAL is not set
#
-# LED Triggers
+# USB Imaging devices
#
+# CONFIG_USB_MDC800 is not set
#
-# InfiniBand support
+# USB port drivers
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_USB_SERIAL is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# Real Time Clock
+# RTC interfaces
#
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Engine support
+# I2C RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
-# DMA Clients
+# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Auxiliary Display support
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
#
-# Virtualization
+# TI VLYNQ
#
+# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
# Pseudo filesystems
#
CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
#
# Security options
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Mon Nov 9 23:42:42 2009
+# Linux kernel version: 2.6.33-rc2
+# Mon Jan 4 13:41:09 2010
#
CONFIG_MIPS=y
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_LEMOTE_FULOONG2E is not set
CONFIG_LEMOTE_MACH2F=y
CONFIG_CS5536=y
+CONFIG_CS5536_MFGPT=y
+CONFIG_LOONGSON_SUSPEND=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_I8259=y
# CONFIG_NO_IOPORT is not set
# CONFIG_CPU_SB1 is not set
# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
CONFIG_CPU_LOONGSON2=y
CONFIG_SYS_HAS_CPU_LOONGSON2F=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_CPUFREQ=y
+CONFIG_CPU_SUPPORTS_ADDRWINCFG=y
+CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED=y
#
# Kernel type
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TICK_ONESHOT=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
+CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
#
# GCOV-based kernel profiling
#
-# CONFIG_SLOW_WORK is not set
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=m
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/hda3"
-# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_MIPS_EXTERNAL_TIMER=y
+CONFIG_MIPS_CPUFREQ=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# CPUFreq processor drivers
+#
+CONFIG_LOONGSON2_CPUFREQ=m
CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
+CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
-# CONFIG_TCP_MD5SIG is not set
+CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_IPV6_ROUTER_PREF=y
+# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
+CONFIG_LLC=m
# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
+CONFIG_LIB80211=m
+CONFIG_LIB80211_DEBUG=y
+CONFIG_MAC80211=m
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
-# CONFIG_RFKILL_INPUT is not set
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
#
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
+CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
# CONFIG_PNP is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
+# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
-# CONFIG_MD is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_DEBUG=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set
#
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
-# CONFIG_DUMMY is not set
+CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
+CONFIG_TUN=m
+CONFIG_VETH=m
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
-CONFIG_8139TOO_TUNE_TWISTER=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
+CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
-CONFIG_WLAN_PRE80211=y
-# CONFIG_STRIP is not set
-# CONFIG_WAVELAN is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=m
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_HSO is not set
+# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# Input device support
#
CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
+CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
#
# Multimedia drivers
#
+CONFIG_IR_CORE=m
+CONFIG_VIDEO_IR=m
# CONFIG_MEDIA_ATTACH is not set
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
+CONFIG_VIDEO_VIVI=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_PAC207=m
+# CONFIG_USB_GSPCA_PAC7302 is not set
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SN9C20X_EVDEV=y
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_STK014=m
+# CONFIG_USB_GSPCA_STV0680 is not set
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_ET61X251=m
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
+CONFIG_USB_SN9C102=m
# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_ZC0301=m
# CONFIG_USB_PWC is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_GENERIC=m
#
# Display device support
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
+CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+# CONFIG_SND_MTPAV is not set
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=10
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_MIPS is not set
-# CONFIG_SND_USB is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# Special HID drivers
#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EZKEY=m
+CONFIG_HID_KYE=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LOGITECH=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
+CONFIG_USB_WUSB=m
# CONFIG_USB_WUSB_CBAF is not set
#
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_WHCI_HCD=m
+CONFIG_USB_HWA_HCD=m
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
+CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
+CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
+CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=m
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_UWB=m
+CONFIG_UWB_HWA=m
+CONFIG_UWB_WHCI=m
+# CONFIG_UWB_WLP is not set
+# CONFIG_UWB_I1480U is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_STAGING_EXCLUDE_BUILD is not set
# CONFIG_ET131X is not set
# CONFIG_USB_IP_COMMON is not set
-# CONFIG_PRISM2_USB is not set
+# CONFIG_W35UND is not set
# CONFIG_ECHO is not set
+# CONFIG_OTUS is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_ALTERA_PCIE_CHDMA is not set
-# CONFIG_RTL8187SE is not set
-# CONFIG_RTL8192SU is not set
+# CONFIG_R8187SE is not set
# CONFIG_RTL8192E is not set
# CONFIG_INPUT_MIMIO is not set
# CONFIG_TRANZPORT is not set
-#
-# Android
-#
-
#
# Qualcomm MSM Camera And Video
#
# Camera Sensor Selection
#
# CONFIG_INPUT_GPIO is not set
-# CONFIG_DST is not set
# CONFIG_POHMELFS is not set
# CONFIG_B3DFG is not set
# CONFIG_PLAN9AUTH is not set
#
# CONFIG_RAR_REGISTER is not set
# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+# CONFIG_WAVELAN is not set
CONFIG_FB_SM7XX=y
-CONFIG_FB_SM7XX_ACCEL=y
+# CONFIG_FB_SM7XX_ACCEL is not set
#
# File systems
#
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
+CONFIG_BTRFS_FS=m
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
+CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#
-# CONFIG_FSCACHE is not set
+CONFIG_FSCACHE=m
+# CONFIG_FSCACHE_STATS is not set
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+# CONFIG_FSCACHE_OBJECT_LIST is not set
+CONFIG_CACHEFILES=m
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
#
# Pseudo filesystems
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+# CONFIG_NFS_FSCACHE is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf-8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
# CONFIG_CMDLINE_BOOL is not set
#
# Security options
#
-# CONFIG_KEYS is not set
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:37 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 09:53:29 2010
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-CONFIG_MIPS_PB1100=y
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+CONFIG_MIPS_PB1100=y
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1100=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1100=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPSR1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
#
# Kernel type
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-pb1100"
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
#
-# Loadable module support
+# GCOV-based kernel profiling
#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
+# CONFIG_PCMCIA_IOCTL is not set
#
# PC-card bridges
#
# CONFIG_PCMCIA_AU1X00 is not set
-
-#
-# PCI Hotplug Support
-#
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# LPDDR flash memory drivers
#
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_UB=y
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
#
-# Misc devices
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+# CONFIG_IDE_PROC_FS is not set
#
-# ATA/ATAPI/MFM/RLL support
+# IDE chipset support/bugfixes
#
-# CONFIG_IDE is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
#
# SCSI device support
#
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_MIPS_AU1X00_ENET is not set
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
#
# Serial drivers
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# PCMCIA character devices
#
-CONFIG_SYNCLINK_CS=m
+# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
#
-# Dallas's 1-wire bus
+# PPS support
#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Multimedia devices
+# Sonics Silicon Backplane
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
#
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
#
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
+# Console display driver support
#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
-# USB Gadget Support
+# USB Host Controller Drivers
#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
-# MMC/SD Card support
+# USB Device Class drivers
#
-# CONFIG_MMC is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# LED devices
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
-# CONFIG_NEW_LEDS is not set
#
-# LED drivers
+# also be needed; see USB_STORAGE Help for more info
#
+# CONFIG_USB_LIBUSUAL is not set
#
-# LED Triggers
+# USB Imaging devices
#
+# CONFIG_USB_MDC800 is not set
#
-# InfiniBand support
+# USB port drivers
#
+# CONFIG_USB_SERIAL is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
#
-# Real Time Clock
+# OTG and related infrastructure
#
-# CONFIG_RTC_CLASS is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Auxiliary Display support
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
#
-# Virtualization
+# TI VLYNQ
#
+# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
# Pseudo filesystems
#
CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
#
# Security options
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33
+# Fri Feb 26 10:23:34 2010
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+CONFIG_MACH_ALCHEMY=y
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+CONFIG_MIPS_PB1200=y
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1200=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-pb1200"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+# CONFIG_PCMCIA_IOCTL is not set
+
+#
+# PC-card bridges
+#
+# CONFIG_PCMCIA_AU1X00 is not set
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_AU1550 is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_UB=y
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+# CONFIG_IDE_PROC_FS is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y
+# CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_MIPS_AU1X00_ENET is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_AU1550=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_AU1550=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+CONFIG_SENSORS_ADM1025=y
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM70=y
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_AU1200=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_AU1XPSC=y
+CONFIG_SND_SOC_AU1XPSC_I2S=y
+CONFIG_SND_SOC_AU1XPSC_AC97=y
+CONFIG_SND_SOC_DB1200=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=y
+CONFIG_SND_SOC_WM8731=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AU1X=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+CONFIG_NLS_CODEPAGE_1250=y
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:37 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 10:05:27 2010
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-CONFIG_MIPS_PB1500=y
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+CONFIG_MIPS_PB1500=y
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1500=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1500=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPSR1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
#
# Kernel type
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-pb1500"
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
#
-# Loadable module support
+# GCOV-based kernel profiling
#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
+# CONFIG_CARDBUS is not set
#
# PC-card bridges
#
# CONFIG_YENTA is not set
-CONFIG_PD6729=m
+# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_PCMCIA_AU1X00 is not set
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# PCI Hotplug Support
-#
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# LPDDR flash memory drivers
#
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
#
-# ATA/ATAPI/MFM/RLL support
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_UB=y
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_IDECD is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
-CONFIG_BLK_DEV_IT8213=m
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# You can enable one or both FireWire driver stacks.
#
-# CONFIG_I2O is not set
#
-# Network device support
+# The newer stack is recommended.
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
+# CONFIG_WLAN is not set
#
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_NET_RADIO is not set
#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-
-#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_PCI is not set
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
#
# PCMCIA character devices
#
-CONFIG_SYNCLINK_CS=m
+# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
#
-# Dallas's 1-wire bus
+# PPS support
#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Multimedia devices
+# Sonics Silicon Backplane
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
#
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
#
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_S1D13XXX=y
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# USB support
+# Console display driver support
#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
-# USB Gadget Support
+# USB Host Controller Drivers
#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
-# MMC/SD Card support
+# USB Device Class drivers
#
-# CONFIG_MMC is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# LED devices
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
-# CONFIG_NEW_LEDS is not set
#
-# LED drivers
+# also be needed; see USB_STORAGE Help for more info
#
+# CONFIG_USB_LIBUSUAL is not set
#
-# LED Triggers
+# USB Imaging devices
#
+# CONFIG_USB_MDC800 is not set
#
-# InfiniBand support
+# USB port drivers
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_USB_SERIAL is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
#
-# Real Time Clock
+# OTG and related infrastructure
#
-# CONFIG_RTC_CLASS is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Auxiliary Display support
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
#
-# Virtualization
+# TI VLYNQ
#
+# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
+CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
#
# Security options
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:37 2007
+# Linux kernel version: 2.6.33
+# Fri Feb 26 10:06:07 2010
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
CONFIG_MACH_ALCHEMY=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-CONFIG_MIPS_PB1550=y
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+CONFIG_MIPS_PB1550=y
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1550=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SOC_AU1550=y
-CONFIG_SOC_AU1X00=y
+CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPSR1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
#
# Kernel type
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
+CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-pb1550"
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
#
-# Loadable module support
+# GCOV-based kernel profiling
#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
+# CONFIG_CARDBUS is not set
#
# PC-card bridges
#
# CONFIG_YENTA is not set
-CONFIG_PD6729=m
+# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_PCMCIA_AU1X00 is not set
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# PCI Hotplug Support
-#
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+# CONFIG_APM_EMULATION is not set
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
+CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
+# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_ALCHEMY=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_AU1550=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
+# LPDDR flash memory drivers
#
-# CONFIG_PNPACPI is not set
+# CONFIG_MTD_LPDDR is not set
#
-# Block devices
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_UB=y
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_IDECD is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
-CONFIG_BLK_DEV_IT8213=m
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# You can enable one or both FireWire driver stacks.
#
-# CONFIG_I2O is not set
#
-# Network device support
+# The newer stack is recommended.
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
CONFIG_MIPS_AU1X00_ENET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
+# CONFIG_WLAN is not set
#
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_NET_RADIO is not set
#
-# PCMCIA network device support
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
+# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_AU1X00_GPIO is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_PCI is not set
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
#
# PCMCIA character devices
#
-CONFIG_SYNCLINK_CS=m
+# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
#
-# TPM devices
+# I2C Algorithms
#
-# CONFIG_TCG_TPM is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
#
-# I2C support
+# I2C Hardware Bus support
#
-# CONFIG_I2C is not set
#
-# SPI support
+# PC SMBus host controller drivers
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
#
-# Dallas's 1-wire bus
+# I2C system bus drivers (mostly embedded / system-on-chip)
#
-# CONFIG_W1 is not set
+CONFIG_I2C_AU1550=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
#
-# Hardware Monitoring support
+# Other I2C/SMBus bus drivers
#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Multimedia devices
+# Sonics Silicon Backplane
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
#
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
#
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
+# Display device support
#
-# CONFIG_HID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# USB support
+# Console display driver support
#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
-# USB Gadget Support
+# USB Host Controller Drivers
#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
-# MMC/SD Card support
+# USB Device Class drivers
#
-# CONFIG_MMC is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# LED devices
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
-# CONFIG_NEW_LEDS is not set
#
-# LED drivers
+# also be needed; see USB_STORAGE Help for more info
#
+# CONFIG_USB_LIBUSUAL is not set
#
-# LED Triggers
+# USB Imaging devices
#
+# CONFIG_USB_MDC800 is not set
#
-# InfiniBand support
+# USB port drivers
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_USB_SERIAL is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# Real Time Clock
+# RTC interfaces
#
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Engine support
+# I2C RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Auxiliary Display support
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
#
-# Virtualization
+# TI VLYNQ
#
+# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
+CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
+# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=m
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
+CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
#
# Security options
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
* There is no default value -- it has to be initialized.
*/
u16 cached_kn01_csr;
-DEFINE_SPINLOCK(kn01_lock);
+static DEFINE_RAW_SPINLOCK(kn01_lock);
static inline void dec_kn01_be_ack(void)
volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
unsigned long flags;
- spin_lock_irqsave(&kn01_lock, flags);
+ raw_spin_lock_irqsave(&kn01_lock, flags);
*csr = cached_kn01_csr | KN01_CSR_MEMERR; /* Clear bus IRQ. */
iob();
- spin_unlock_irqrestore(&kn01_lock, flags);
+ raw_spin_unlock_irqrestore(&kn01_lock, flags);
}
static int dec_kn01_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
unsigned long flags;
- spin_lock_irqsave(&kn01_lock, flags);
+ raw_spin_lock_irqsave(&kn01_lock, flags);
/* Preset write-only bits of the Control Register cache. */
cached_kn01_csr = *csr;
*csr = cached_kn01_csr;
iob();
- spin_unlock_irqrestore(&kn01_lock, flags);
+ raw_spin_unlock_irqrestore(&kn01_lock, flags);
/* Clear any leftover errors from the firmware. */
dec_kn01_be_ack();
jr k0
rfe
END(genexcept_early)
-
{
int result;
- smp_llsc_mb();
+ smp_mb__before_llsc();
if (kernel_uses_llsc && R10000_LLSC_WAR) {
int temp;
{
int result;
- smp_llsc_mb();
+ smp_mb__before_llsc();
if (kernel_uses_llsc && R10000_LLSC_WAR) {
int temp;
{
int result;
- smp_llsc_mb();
+ smp_mb__before_llsc();
if (kernel_uses_llsc && R10000_LLSC_WAR) {
int temp;
{
long result;
- smp_llsc_mb();
+ smp_mb__before_llsc();
if (kernel_uses_llsc && R10000_LLSC_WAR) {
long temp;
{
long result;
- smp_llsc_mb();
+ smp_mb__before_llsc();
if (kernel_uses_llsc && R10000_LLSC_WAR) {
long temp;
{
long result;
- smp_llsc_mb();
+ smp_mb__before_llsc();
if (kernel_uses_llsc && R10000_LLSC_WAR) {
long temp;
* atomic*_return operations are serializing but not the non-*_return
* versions.
*/
-#define smp_mb__before_atomic_dec() smp_llsc_mb()
+#define smp_mb__before_atomic_dec() smp_mb__before_llsc()
#define smp_mb__after_atomic_dec() smp_llsc_mb()
-#define smp_mb__before_atomic_inc() smp_llsc_mb()
+#define smp_mb__before_atomic_inc() smp_mb__before_llsc()
#define smp_mb__after_atomic_inc() smp_llsc_mb()
#include <asm-generic/atomic-long.h>
: /* no output */ \
: "m" (*(int *)CKSEG1) \
: "memory")
-
-#define fast_wmb() __sync()
-#define fast_rmb() __sync()
-#define fast_mb() __sync()
-#ifdef CONFIG_SGI_IP28
-#define fast_iob() \
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+# define OCTEON_SYNCW_STR ".set push\n.set arch=octeon\nsyncw\nsyncw\n.set pop\n"
+# define __syncw() __asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory")
+
+# define fast_wmb() __syncw()
+# define fast_rmb() barrier()
+# define fast_mb() __sync()
+# define fast_iob() do { } while (0)
+#else /* ! CONFIG_CPU_CAVIUM_OCTEON */
+# define fast_wmb() __sync()
+# define fast_rmb() __sync()
+# define fast_mb() __sync()
+# ifdef CONFIG_SGI_IP28
+# define fast_iob() \
__asm__ __volatile__( \
".set push\n\t" \
".set noreorder\n\t" \
: /* no output */ \
: "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \
: "memory")
-#else
-#define fast_iob() \
+# else
+# define fast_iob() \
do { \
__sync(); \
__fast_iob(); \
} while (0)
-#endif
+# endif
+#endif /* CONFIG_CPU_CAVIUM_OCTEON */
#ifdef CONFIG_CPU_HAS_WB
#endif /* !CONFIG_CPU_HAS_WB */
#if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP)
-#define __WEAK_ORDERING_MB " sync \n"
+# ifdef CONFIG_CPU_CAVIUM_OCTEON
+# define smp_mb() __sync()
+# define smp_rmb() barrier()
+# define smp_wmb() __syncw()
+# else
+# define smp_mb() __asm__ __volatile__("sync" : : :"memory")
+# define smp_rmb() __asm__ __volatile__("sync" : : :"memory")
+# define smp_wmb() __asm__ __volatile__("sync" : : :"memory")
+# endif
#else
-#define __WEAK_ORDERING_MB " \n"
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
#endif
+
#if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP)
#define __WEAK_LLSC_MB " sync \n"
#else
#define __WEAK_LLSC_MB " \n"
#endif
-#define smp_mb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
-#define smp_rmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
-#define smp_wmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
-
#define set_mb(var, value) \
do { var = value; smp_mb(); } while (0)
#define smp_llsc_mb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
-#define smp_llsc_rmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
-#define smp_llsc_wmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+#define smp_mb__before_llsc() smp_wmb()
+/* Cause previous writes to become visible on all CPUs as soon as possible */
+#define nudge_writes() __asm__ __volatile__(".set push\n\t" \
+ ".set arch=octeon\n\t" \
+ "syncw\n\t" \
+ ".set pop" : : : "memory")
+#else
+#define smp_mb__before_llsc() smp_llsc_mb()
+#define nudge_writes() mb()
+#endif
#endif /* __ASM_BARRIER_H */
/*
* clear_bit() doesn't provide any barrier for the compiler.
*/
-#define smp_mb__before_clear_bit() smp_llsc_mb()
+#define smp_mb__before_clear_bit() smp_mb__before_llsc()
#define smp_mb__after_clear_bit() smp_llsc_mb()
/*
unsigned short bit = nr & SZLONG_MASK;
unsigned long res;
- smp_llsc_mb();
+ smp_mb__before_llsc();
if (kernel_uses_llsc && R10000_LLSC_WAR) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
unsigned short bit = nr & SZLONG_MASK;
unsigned long res;
- smp_llsc_mb();
+ smp_mb__before_llsc();
if (kernel_uses_llsc && R10000_LLSC_WAR) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
unsigned short bit = nr & SZLONG_MASK;
unsigned long res;
- smp_llsc_mb();
+ smp_mb__before_llsc();
if (kernel_uses_llsc && R10000_LLSC_WAR) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
*/
extern void __cmpxchg_called_with_bad_pointer(void);
-#define __cmpxchg(ptr, old, new, barrier) \
+#define __cmpxchg(ptr, old, new, pre_barrier, post_barrier) \
({ \
__typeof__(ptr) __ptr = (ptr); \
__typeof__(*(ptr)) __old = (old); \
__typeof__(*(ptr)) __new = (new); \
__typeof__(*(ptr)) __res = 0; \
\
- barrier; \
+ pre_barrier; \
\
switch (sizeof(*(__ptr))) { \
case 4: \
break; \
} \
\
- barrier; \
+ post_barrier; \
\
__res; \
})
-#define cmpxchg(ptr, old, new) __cmpxchg(ptr, old, new, smp_llsc_mb())
-#define cmpxchg_local(ptr, old, new) __cmpxchg(ptr, old, new, )
+#define cmpxchg(ptr, old, new) __cmpxchg(ptr, old, new, smp_mb__before_llsc(), smp_llsc_mb())
+#define cmpxchg_local(ptr, old, new) __cmpxchg(ptr, old, new, , )
#define cmpxchg64(ptr, o, n) \
({ \
#ifndef cpu_has_smartmips
#define cpu_has_smartmips (cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
#endif
+#ifndef kernel_uses_smartmips_rixi
+#define kernel_uses_smartmips_rixi 0
+#endif
#ifndef cpu_has_vtag_icache
#define cpu_has_vtag_icache (cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
#endif
* MIPS64 class processors
*/
CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
- CPU_CAVIUM_OCTEON,
+ CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS,
CPU_LAST
};
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 2002 Ralf Baechle
- * Copyright (C) 1999 Silicon Graphics, Inc.
- */
-#ifndef _ASM_CURRENT_H
-#define _ASM_CURRENT_H
-
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct * get_current(void)
-{
- return current_thread_info()->task;
-}
-
-#define current get_current()
-
-#endif /* _ASM_CURRENT_H */
+#include <asm-generic/current.h>
struct pt_regs;
extern u16 cached_kn01_csr;
-extern spinlock_t kn01_lock;
extern void dec_kn01_be_init(void);
extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup);
* This file is released under the GPLv2
*/
#include <asm-generic/device.h>
-
#define ELF_HWCAP (0)
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo.
-
- For the moment, we have only optimizations for the Intel generations,
- but that could change... */
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization. This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ */
-#define ELF_PLATFORM (NULL)
+#define ELF_PLATFORM __elf_platform
+extern const char *__elf_platform;
/*
* See comments in asm-alpha/elf.h, this is the same thing
* more details.
*
* Copyright (C) 2009 DSLab, Lanzhou University, China
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
*/
#ifndef _ASM_MIPS_FTRACE_H
#define SLAVE_ICW4_DEFAULT 0x01
#define PIC_ICW4_AEOI 2
-extern spinlock_t i8259A_lock;
+extern raw_spinlock_t i8259A_lock;
extern int i8259A_irq_pending(unsigned int irq);
extern void make_8259A_irq(unsigned int irq);
{
int irq;
- spin_lock(&i8259A_lock);
+ raw_spin_lock(&i8259A_lock);
/* Perform an interrupt acknowledge cycle on controller 1. */
outb(0x0C, PIC_MASTER_CMD); /* prepare for poll */
irq = -1;
}
- spin_unlock(&i8259A_lock);
+ raw_spin_unlock(&i8259A_lock);
return likely(irq >= 0) ? irq + I8259A_IRQ_BASE : irq;
}
#define readl_relaxed readl
#define readq_relaxed readq
+#define readb_be(addr) \
+ __raw_readb((__force unsigned *)(addr))
+#define readw_be(addr) \
+ be16_to_cpu(__raw_readw((__force unsigned *)(addr)))
+#define readl_be(addr) \
+ be32_to_cpu(__raw_readl((__force unsigned *)(addr)))
+#define readq_be(addr) \
+ be64_to_cpu(__raw_readq((__force unsigned *)(addr)))
+
+#define writeb_be(val, addr) \
+ __raw_writeb((val), (__force unsigned *)(addr))
+#define writew_be(val, addr) \
+ __raw_writew(cpu_to_be16((val)), (__force unsigned *)(addr))
+#define writel_be(val, addr) \
+ __raw_writel(cpu_to_be32((val)), (__force unsigned *)(addr))
+#define writeq_be(val, addr) \
+ __raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr))
+
/*
* Some code tests for these symbols
*/
return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
}
-static inline int ar7_cpu_freq(void)
-{
- return ar7_cpu_clock;
-}
-
-static inline int ar7_bus_freq(void)
-{
- return ar7_bus_clock;
-}
-
-static inline int ar7_vbus_freq(void)
-{
- return ar7_bus_clock / 2;
-}
-#define ar7_cpmac_freq ar7_vbus_freq
-
-static inline int ar7_dsp_freq(void)
-{
- return ar7_dsp_clock;
-}
+struct clk {
+ unsigned int rate;
+};
static inline int ar7_has_high_cpmac(void)
{
/*
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2007-2009 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <asm/mach-ar7/ar7.h>
#define AR7_GPIO_MAX 32
+#define NR_BUILTIN_GPIO AR7_GPIO_MAX
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
+#define gpio_to_irq(gpio) NULL
-/* Common GPIO layer */
-static inline int gpio_get_value(unsigned gpio)
-{
- void __iomem *gpio_in =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT);
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
- return readl(gpio_in) & (1 << gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- void __iomem *gpio_out =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT);
- unsigned tmp;
-
- tmp = readl(gpio_out) & ~(1 << gpio);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, gpio_out);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- void __iomem *gpio_dir =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
-
- if (gpio >= AR7_GPIO_MAX)
- return -EINVAL;
-
- writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
-
- return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- void __iomem *gpio_dir =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
-
- if (gpio >= AR7_GPIO_MAX)
- return -EINVAL;
-
- gpio_set_value(gpio, value);
- writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
-
- return 0;
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return -EINVAL;
-}
+#define gpio_cansleep __gpio_cansleep
/* Board specific GPIO functions */
-static inline int ar7_gpio_enable(unsigned gpio)
-{
- void __iomem *gpio_en =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
-
- writel(readl(gpio_en) | (1 << gpio), gpio_en);
-
- return 0;
-}
-
-static inline int ar7_gpio_disable(unsigned gpio)
-{
- void __iomem *gpio_en =
- (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
-
- writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
-
- return 0;
-}
+int ar7_gpio_enable(unsigned gpio);
+int ar7_gpio_disable(unsigned gpio);
#include <asm-generic/gpio.h>
return 0;
}
+#define ALCHEMY_CPU_UNKNOWN -1
+#define ALCHEMY_CPU_AU1000 0
+#define ALCHEMY_CPU_AU1500 1
+#define ALCHEMY_CPU_AU1100 2
+#define ALCHEMY_CPU_AU1550 3
+#define ALCHEMY_CPU_AU1200 4
+
+static inline int alchemy_get_cputype(void)
+{
+ switch (read_c0_prid() & 0xffff0000) {
+ case 0x00030000:
+ return ALCHEMY_CPU_AU1000;
+ break;
+ case 0x01030000:
+ return ALCHEMY_CPU_AU1500;
+ break;
+ case 0x02030000:
+ return ALCHEMY_CPU_AU1100;
+ break;
+ case 0x03030000:
+ return ALCHEMY_CPU_AU1550;
+ break;
+ case 0x04030000:
+ case 0x05030000:
+ return ALCHEMY_CPU_AU1200;
+ break;
+ }
+
+ return ALCHEMY_CPU_UNKNOWN;
+}
+
+static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys);
+ int timeout, i;
+
+ /* check LSR TX_EMPTY bit */
+ timeout = 0xffffff;
+ do {
+ if (__raw_readl(base + 0x1c) & 0x20)
+ break;
+ /* slow down */
+ for (i = 10000; i; i--)
+ asm volatile ("nop");
+ } while (--timeout);
+
+ __raw_writel(c, base + 0x04); /* tx */
+ wmb();
+}
+
/* arch/mips/au1000/common/clocks.c */
extern void set_au1x00_speed(unsigned int new_freq);
extern unsigned int get_au1x00_speed(void);
void save_au1xxx_intctl(void);
void restore_au1xxx_intctl(void);
-/*
- * Every board describes its IRQ mapping with this table.
- */
-struct au1xxx_irqmap {
- int im_irq;
- int im_type;
- int im_request;
+
+/* SOC Interrupt numbers */
+
+#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
+#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31)
+#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1)
+#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31)
+#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST
+
+enum soc_au1000_ints {
+ AU1000_FIRST_INT = AU1000_INTC0_INT_BASE,
+ AU1000_UART0_INT = AU1000_FIRST_INT,
+ AU1000_UART1_INT,
+ AU1000_UART2_INT,
+ AU1000_UART3_INT,
+ AU1000_SSI0_INT,
+ AU1000_SSI1_INT,
+ AU1000_DMA_INT_BASE,
+
+ AU1000_TOY_INT = AU1000_FIRST_INT + 14,
+ AU1000_TOY_MATCH0_INT,
+ AU1000_TOY_MATCH1_INT,
+ AU1000_TOY_MATCH2_INT,
+ AU1000_RTC_INT,
+ AU1000_RTC_MATCH0_INT,
+ AU1000_RTC_MATCH1_INT,
+ AU1000_RTC_MATCH2_INT,
+ AU1000_IRDA_TX_INT,
+ AU1000_IRDA_RX_INT,
+ AU1000_USB_DEV_REQ_INT,
+ AU1000_USB_DEV_SUS_INT,
+ AU1000_USB_HOST_INT,
+ AU1000_ACSYNC_INT,
+ AU1000_MAC0_DMA_INT,
+ AU1000_MAC1_DMA_INT,
+ AU1000_I2S_UO_INT,
+ AU1000_AC97C_INT,
+ AU1000_GPIO0_INT,
+ AU1000_GPIO1_INT,
+ AU1000_GPIO2_INT,
+ AU1000_GPIO3_INT,
+ AU1000_GPIO4_INT,
+ AU1000_GPIO5_INT,
+ AU1000_GPIO6_INT,
+ AU1000_GPIO7_INT,
+ AU1000_GPIO8_INT,
+ AU1000_GPIO9_INT,
+ AU1000_GPIO10_INT,
+ AU1000_GPIO11_INT,
+ AU1000_GPIO12_INT,
+ AU1000_GPIO13_INT,
+ AU1000_GPIO14_INT,
+ AU1000_GPIO15_INT,
+ AU1000_GPIO16_INT,
+ AU1000_GPIO17_INT,
+ AU1000_GPIO18_INT,
+ AU1000_GPIO19_INT,
+ AU1000_GPIO20_INT,
+ AU1000_GPIO21_INT,
+ AU1000_GPIO22_INT,
+ AU1000_GPIO23_INT,
+ AU1000_GPIO24_INT,
+ AU1000_GPIO25_INT,
+ AU1000_GPIO26_INT,
+ AU1000_GPIO27_INT,
+ AU1000_GPIO28_INT,
+ AU1000_GPIO29_INT,
+ AU1000_GPIO30_INT,
+ AU1000_GPIO31_INT,
};
-/* core calls this function to let boards initialize other IRQ sources */
-void board_init_irq(void);
+enum soc_au1100_ints {
+ AU1100_FIRST_INT = AU1000_INTC0_INT_BASE,
+ AU1100_UART0_INT = AU1100_FIRST_INT,
+ AU1100_UART1_INT,
+ AU1100_SD_INT,
+ AU1100_UART3_INT,
+ AU1100_SSI0_INT,
+ AU1100_SSI1_INT,
+ AU1100_DMA_INT_BASE,
+
+ AU1100_TOY_INT = AU1100_FIRST_INT + 14,
+ AU1100_TOY_MATCH0_INT,
+ AU1100_TOY_MATCH1_INT,
+ AU1100_TOY_MATCH2_INT,
+ AU1100_RTC_INT,
+ AU1100_RTC_MATCH0_INT,
+ AU1100_RTC_MATCH1_INT,
+ AU1100_RTC_MATCH2_INT,
+ AU1100_IRDA_TX_INT,
+ AU1100_IRDA_RX_INT,
+ AU1100_USB_DEV_REQ_INT,
+ AU1100_USB_DEV_SUS_INT,
+ AU1100_USB_HOST_INT,
+ AU1100_ACSYNC_INT,
+ AU1100_MAC0_DMA_INT,
+ AU1100_GPIO208_215_INT,
+ AU1100_LCD_INT,
+ AU1100_AC97C_INT,
+ AU1100_GPIO0_INT,
+ AU1100_GPIO1_INT,
+ AU1100_GPIO2_INT,
+ AU1100_GPIO3_INT,
+ AU1100_GPIO4_INT,
+ AU1100_GPIO5_INT,
+ AU1100_GPIO6_INT,
+ AU1100_GPIO7_INT,
+ AU1100_GPIO8_INT,
+ AU1100_GPIO9_INT,
+ AU1100_GPIO10_INT,
+ AU1100_GPIO11_INT,
+ AU1100_GPIO12_INT,
+ AU1100_GPIO13_INT,
+ AU1100_GPIO14_INT,
+ AU1100_GPIO15_INT,
+ AU1100_GPIO16_INT,
+ AU1100_GPIO17_INT,
+ AU1100_GPIO18_INT,
+ AU1100_GPIO19_INT,
+ AU1100_GPIO20_INT,
+ AU1100_GPIO21_INT,
+ AU1100_GPIO22_INT,
+ AU1100_GPIO23_INT,
+ AU1100_GPIO24_INT,
+ AU1100_GPIO25_INT,
+ AU1100_GPIO26_INT,
+ AU1100_GPIO27_INT,
+ AU1100_GPIO28_INT,
+ AU1100_GPIO29_INT,
+ AU1100_GPIO30_INT,
+ AU1100_GPIO31_INT,
+};
-/* boards call this to register additional (GPIO) interrupts */
-void au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count);
+enum soc_au1500_ints {
+ AU1500_FIRST_INT = AU1000_INTC0_INT_BASE,
+ AU1500_UART0_INT = AU1500_FIRST_INT,
+ AU1500_PCI_INTA,
+ AU1500_PCI_INTB,
+ AU1500_UART3_INT,
+ AU1500_PCI_INTC,
+ AU1500_PCI_INTD,
+ AU1500_DMA_INT_BASE,
+
+ AU1500_TOY_INT = AU1500_FIRST_INT + 14,
+ AU1500_TOY_MATCH0_INT,
+ AU1500_TOY_MATCH1_INT,
+ AU1500_TOY_MATCH2_INT,
+ AU1500_RTC_INT,
+ AU1500_RTC_MATCH0_INT,
+ AU1500_RTC_MATCH1_INT,
+ AU1500_RTC_MATCH2_INT,
+ AU1500_PCI_ERR_INT,
+ AU1500_RESERVED_INT,
+ AU1500_USB_DEV_REQ_INT,
+ AU1500_USB_DEV_SUS_INT,
+ AU1500_USB_HOST_INT,
+ AU1500_ACSYNC_INT,
+ AU1500_MAC0_DMA_INT,
+ AU1500_MAC1_DMA_INT,
+ AU1500_AC97C_INT = AU1500_FIRST_INT + 31,
+ AU1500_GPIO0_INT,
+ AU1500_GPIO1_INT,
+ AU1500_GPIO2_INT,
+ AU1500_GPIO3_INT,
+ AU1500_GPIO4_INT,
+ AU1500_GPIO5_INT,
+ AU1500_GPIO6_INT,
+ AU1500_GPIO7_INT,
+ AU1500_GPIO8_INT,
+ AU1500_GPIO9_INT,
+ AU1500_GPIO10_INT,
+ AU1500_GPIO11_INT,
+ AU1500_GPIO12_INT,
+ AU1500_GPIO13_INT,
+ AU1500_GPIO14_INT,
+ AU1500_GPIO15_INT,
+ AU1500_GPIO200_INT,
+ AU1500_GPIO201_INT,
+ AU1500_GPIO202_INT,
+ AU1500_GPIO203_INT,
+ AU1500_GPIO20_INT,
+ AU1500_GPIO204_INT,
+ AU1500_GPIO205_INT,
+ AU1500_GPIO23_INT,
+ AU1500_GPIO24_INT,
+ AU1500_GPIO25_INT,
+ AU1500_GPIO26_INT,
+ AU1500_GPIO27_INT,
+ AU1500_GPIO28_INT,
+ AU1500_GPIO206_INT,
+ AU1500_GPIO207_INT,
+ AU1500_GPIO208_215_INT,
+};
+
+enum soc_au1550_ints {
+ AU1550_FIRST_INT = AU1000_INTC0_INT_BASE,
+ AU1550_UART0_INT = AU1550_FIRST_INT,
+ AU1550_PCI_INTA,
+ AU1550_PCI_INTB,
+ AU1550_DDMA_INT,
+ AU1550_CRYPTO_INT,
+ AU1550_PCI_INTC,
+ AU1550_PCI_INTD,
+ AU1550_PCI_RST_INT,
+ AU1550_UART1_INT,
+ AU1550_UART3_INT,
+ AU1550_PSC0_INT,
+ AU1550_PSC1_INT,
+ AU1550_PSC2_INT,
+ AU1550_PSC3_INT,
+ AU1550_TOY_INT,
+ AU1550_TOY_MATCH0_INT,
+ AU1550_TOY_MATCH1_INT,
+ AU1550_TOY_MATCH2_INT,
+ AU1550_RTC_INT,
+ AU1550_RTC_MATCH0_INT,
+ AU1550_RTC_MATCH1_INT,
+ AU1550_RTC_MATCH2_INT,
+
+ AU1550_NAND_INT = AU1550_FIRST_INT + 23,
+ AU1550_USB_DEV_REQ_INT,
+ AU1550_USB_DEV_SUS_INT,
+ AU1550_USB_HOST_INT,
+ AU1550_MAC0_DMA_INT,
+ AU1550_MAC1_DMA_INT,
+ AU1550_GPIO0_INT = AU1550_FIRST_INT + 32,
+ AU1550_GPIO1_INT,
+ AU1550_GPIO2_INT,
+ AU1550_GPIO3_INT,
+ AU1550_GPIO4_INT,
+ AU1550_GPIO5_INT,
+ AU1550_GPIO6_INT,
+ AU1550_GPIO7_INT,
+ AU1550_GPIO8_INT,
+ AU1550_GPIO9_INT,
+ AU1550_GPIO10_INT,
+ AU1550_GPIO11_INT,
+ AU1550_GPIO12_INT,
+ AU1550_GPIO13_INT,
+ AU1550_GPIO14_INT,
+ AU1550_GPIO15_INT,
+ AU1550_GPIO200_INT,
+ AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */
+ AU1550_GPIO16_INT,
+ AU1550_GPIO17_INT,
+ AU1550_GPIO20_INT,
+ AU1550_GPIO21_INT,
+ AU1550_GPIO22_INT,
+ AU1550_GPIO23_INT,
+ AU1550_GPIO24_INT,
+ AU1550_GPIO25_INT,
+ AU1550_GPIO26_INT,
+ AU1550_GPIO27_INT,
+ AU1550_GPIO28_INT,
+ AU1550_GPIO206_INT,
+ AU1550_GPIO207_INT,
+ AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */
+};
+
+enum soc_au1200_ints {
+ AU1200_FIRST_INT = AU1000_INTC0_INT_BASE,
+ AU1200_UART0_INT = AU1200_FIRST_INT,
+ AU1200_SWT_INT,
+ AU1200_SD_INT,
+ AU1200_DDMA_INT,
+ AU1200_MAE_BE_INT,
+ AU1200_GPIO200_INT,
+ AU1200_GPIO201_INT,
+ AU1200_GPIO202_INT,
+ AU1200_UART1_INT,
+ AU1200_MAE_FE_INT,
+ AU1200_PSC0_INT,
+ AU1200_PSC1_INT,
+ AU1200_AES_INT,
+ AU1200_CAMERA_INT,
+ AU1200_TOY_INT,
+ AU1200_TOY_MATCH0_INT,
+ AU1200_TOY_MATCH1_INT,
+ AU1200_TOY_MATCH2_INT,
+ AU1200_RTC_INT,
+ AU1200_RTC_MATCH0_INT,
+ AU1200_RTC_MATCH1_INT,
+ AU1200_RTC_MATCH2_INT,
+ AU1200_GPIO203_INT,
+ AU1200_NAND_INT,
+ AU1200_GPIO204_INT,
+ AU1200_GPIO205_INT,
+ AU1200_GPIO206_INT,
+ AU1200_GPIO207_INT,
+ AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */
+ AU1200_USB_INT,
+ AU1200_LCD_INT,
+ AU1200_MAE_BOTH_INT,
+ AU1200_GPIO0_INT,
+ AU1200_GPIO1_INT,
+ AU1200_GPIO2_INT,
+ AU1200_GPIO3_INT,
+ AU1200_GPIO4_INT,
+ AU1200_GPIO5_INT,
+ AU1200_GPIO6_INT,
+ AU1200_GPIO7_INT,
+ AU1200_GPIO8_INT,
+ AU1200_GPIO9_INT,
+ AU1200_GPIO10_INT,
+ AU1200_GPIO11_INT,
+ AU1200_GPIO12_INT,
+ AU1200_GPIO13_INT,
+ AU1200_GPIO14_INT,
+ AU1200_GPIO15_INT,
+ AU1200_GPIO16_INT,
+ AU1200_GPIO17_INT,
+ AU1200_GPIO18_INT,
+ AU1200_GPIO19_INT,
+ AU1200_GPIO20_INT,
+ AU1200_GPIO21_INT,
+ AU1200_GPIO22_INT,
+ AU1200_GPIO23_INT,
+ AU1200_GPIO24_INT,
+ AU1200_GPIO25_INT,
+ AU1200_GPIO26_INT,
+ AU1200_GPIO27_INT,
+ AU1200_GPIO28_INT,
+ AU1200_GPIO29_INT,
+ AU1200_GPIO30_INT,
+ AU1200_GPIO31_INT,
+};
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
#define IC1_TESTBIT 0xB1800080
-/* Interrupt Numbers */
+
/* Au1000 */
#ifdef CONFIG_SOC_AU1000
-enum soc_au1000_ints {
- AU1000_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
- AU1000_UART0_INT = AU1000_FIRST_INT,
- AU1000_UART1_INT, /* au1000 */
- AU1000_UART2_INT, /* au1000 */
- AU1000_UART3_INT,
- AU1000_SSI0_INT, /* au1000 */
- AU1000_SSI1_INT, /* au1000 */
- AU1000_DMA_INT_BASE,
-
- AU1000_TOY_INT = AU1000_FIRST_INT + 14,
- AU1000_TOY_MATCH0_INT,
- AU1000_TOY_MATCH1_INT,
- AU1000_TOY_MATCH2_INT,
- AU1000_RTC_INT,
- AU1000_RTC_MATCH0_INT,
- AU1000_RTC_MATCH1_INT,
- AU1000_RTC_MATCH2_INT,
- AU1000_IRDA_TX_INT, /* au1000 */
- AU1000_IRDA_RX_INT, /* au1000 */
- AU1000_USB_DEV_REQ_INT,
- AU1000_USB_DEV_SUS_INT,
- AU1000_USB_HOST_INT,
- AU1000_ACSYNC_INT,
- AU1000_MAC0_DMA_INT,
- AU1000_MAC1_DMA_INT,
- AU1000_I2S_UO_INT, /* au1000 */
- AU1000_AC97C_INT,
- AU1000_GPIO_0,
- AU1000_GPIO_1,
- AU1000_GPIO_2,
- AU1000_GPIO_3,
- AU1000_GPIO_4,
- AU1000_GPIO_5,
- AU1000_GPIO_6,
- AU1000_GPIO_7,
- AU1000_GPIO_8,
- AU1000_GPIO_9,
- AU1000_GPIO_10,
- AU1000_GPIO_11,
- AU1000_GPIO_12,
- AU1000_GPIO_13,
- AU1000_GPIO_14,
- AU1000_GPIO_15,
- AU1000_GPIO_16,
- AU1000_GPIO_17,
- AU1000_GPIO_18,
- AU1000_GPIO_19,
- AU1000_GPIO_20,
- AU1000_GPIO_21,
- AU1000_GPIO_22,
- AU1000_GPIO_23,
- AU1000_GPIO_24,
- AU1000_GPIO_25,
- AU1000_GPIO_26,
- AU1000_GPIO_27,
- AU1000_GPIO_28,
- AU1000_GPIO_29,
- AU1000_GPIO_30,
- AU1000_GPIO_31,
-};
#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
-#define UART2_ADDR 0xB1300000
#define UART3_ADDR 0xB1400000
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017FFFC
+#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT
#define AU1000_ETH0_BASE 0xB0500000
#define AU1000_ETH1_BASE 0xB0510000
/* Au1500 */
#ifdef CONFIG_SOC_AU1500
-enum soc_au1500_ints {
- AU1500_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
- AU1500_UART0_INT = AU1500_FIRST_INT,
- AU1000_PCI_INTA, /* au1500 */
- AU1000_PCI_INTB, /* au1500 */
- AU1500_UART3_INT,
- AU1000_PCI_INTC, /* au1500 */
- AU1000_PCI_INTD, /* au1500 */
- AU1000_DMA_INT_BASE,
-
- AU1000_TOY_INT = AU1500_FIRST_INT + 14,
- AU1000_TOY_MATCH0_INT,
- AU1000_TOY_MATCH1_INT,
- AU1000_TOY_MATCH2_INT,
- AU1000_RTC_INT,
- AU1000_RTC_MATCH0_INT,
- AU1000_RTC_MATCH1_INT,
- AU1000_RTC_MATCH2_INT,
- AU1500_PCI_ERR_INT,
- AU1500_RESERVED_INT,
- AU1000_USB_DEV_REQ_INT,
- AU1000_USB_DEV_SUS_INT,
- AU1000_USB_HOST_INT,
- AU1000_ACSYNC_INT,
- AU1500_MAC0_DMA_INT,
- AU1500_MAC1_DMA_INT,
- AU1000_AC97C_INT = AU1500_FIRST_INT + 31,
- AU1000_GPIO_0,
- AU1000_GPIO_1,
- AU1000_GPIO_2,
- AU1000_GPIO_3,
- AU1000_GPIO_4,
- AU1000_GPIO_5,
- AU1000_GPIO_6,
- AU1000_GPIO_7,
- AU1000_GPIO_8,
- AU1000_GPIO_9,
- AU1000_GPIO_10,
- AU1000_GPIO_11,
- AU1000_GPIO_12,
- AU1000_GPIO_13,
- AU1000_GPIO_14,
- AU1000_GPIO_15,
- AU1500_GPIO_200,
- AU1500_GPIO_201,
- AU1500_GPIO_202,
- AU1500_GPIO_203,
- AU1500_GPIO_20,
- AU1500_GPIO_204,
- AU1500_GPIO_205,
- AU1500_GPIO_23,
- AU1500_GPIO_24,
- AU1500_GPIO_25,
- AU1500_GPIO_26,
- AU1500_GPIO_27,
- AU1500_GPIO_28,
- AU1500_GPIO_206,
- AU1500_GPIO_207,
- AU1500_GPIO_208_215,
-};
-
-/* shortcuts */
-#define INTA AU1000_PCI_INTA
-#define INTB AU1000_PCI_INTB
-#define INTC AU1000_PCI_INTC
-#define INTD AU1000_PCI_INTD
#define UART0_ADDR 0xB1100000
#define UART3_ADDR 0xB1400000
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017fffc
+#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT
#define AU1500_ETH0_BASE 0xB1500000
#define AU1500_ETH1_BASE 0xB1510000
/* Au1100 */
#ifdef CONFIG_SOC_AU1100
-enum soc_au1100_ints {
- AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
- AU1100_UART0_INT = AU1100_FIRST_INT,
- AU1100_UART1_INT,
- AU1100_SD_INT,
- AU1100_UART3_INT,
- AU1000_SSI0_INT,
- AU1000_SSI1_INT,
- AU1000_DMA_INT_BASE,
-
- AU1000_TOY_INT = AU1100_FIRST_INT + 14,
- AU1000_TOY_MATCH0_INT,
- AU1000_TOY_MATCH1_INT,
- AU1000_TOY_MATCH2_INT,
- AU1000_RTC_INT,
- AU1000_RTC_MATCH0_INT,
- AU1000_RTC_MATCH1_INT,
- AU1000_RTC_MATCH2_INT,
- AU1000_IRDA_TX_INT,
- AU1000_IRDA_RX_INT,
- AU1000_USB_DEV_REQ_INT,
- AU1000_USB_DEV_SUS_INT,
- AU1000_USB_HOST_INT,
- AU1000_ACSYNC_INT,
- AU1100_MAC0_DMA_INT,
- AU1100_GPIO_208_215,
- AU1100_LCD_INT,
- AU1000_AC97C_INT,
- AU1000_GPIO_0,
- AU1000_GPIO_1,
- AU1000_GPIO_2,
- AU1000_GPIO_3,
- AU1000_GPIO_4,
- AU1000_GPIO_5,
- AU1000_GPIO_6,
- AU1000_GPIO_7,
- AU1000_GPIO_8,
- AU1000_GPIO_9,
- AU1000_GPIO_10,
- AU1000_GPIO_11,
- AU1000_GPIO_12,
- AU1000_GPIO_13,
- AU1000_GPIO_14,
- AU1000_GPIO_15,
- AU1000_GPIO_16,
- AU1000_GPIO_17,
- AU1000_GPIO_18,
- AU1000_GPIO_19,
- AU1000_GPIO_20,
- AU1000_GPIO_21,
- AU1000_GPIO_22,
- AU1000_GPIO_23,
- AU1000_GPIO_24,
- AU1000_GPIO_25,
- AU1000_GPIO_26,
- AU1000_GPIO_27,
- AU1000_GPIO_28,
- AU1000_GPIO_29,
- AU1000_GPIO_30,
- AU1000_GPIO_31,
-};
#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
#define UART3_ADDR 0xB1400000
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017FFFC
+#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT
#define AU1100_ETH0_BASE 0xB0500000
#define AU1100_MAC0_ENABLE 0xB0520000
#endif /* CONFIG_SOC_AU1100 */
#ifdef CONFIG_SOC_AU1550
-enum soc_au1550_ints {
- AU1550_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
- AU1550_UART0_INT = AU1550_FIRST_INT,
- AU1550_PCI_INTA,
- AU1550_PCI_INTB,
- AU1550_DDMA_INT,
- AU1550_CRYPTO_INT,
- AU1550_PCI_INTC,
- AU1550_PCI_INTD,
- AU1550_PCI_RST_INT,
- AU1550_UART1_INT,
- AU1550_UART3_INT,
- AU1550_PSC0_INT,
- AU1550_PSC1_INT,
- AU1550_PSC2_INT,
- AU1550_PSC3_INT,
- AU1000_TOY_INT,
- AU1000_TOY_MATCH0_INT,
- AU1000_TOY_MATCH1_INT,
- AU1000_TOY_MATCH2_INT,
- AU1000_RTC_INT,
- AU1000_RTC_MATCH0_INT,
- AU1000_RTC_MATCH1_INT,
- AU1000_RTC_MATCH2_INT,
-
- AU1550_NAND_INT = AU1550_FIRST_INT + 23,
- AU1550_USB_DEV_REQ_INT,
- AU1000_USB_DEV_REQ_INT = AU1550_USB_DEV_REQ_INT,
- AU1550_USB_DEV_SUS_INT,
- AU1000_USB_DEV_SUS_INT = AU1550_USB_DEV_SUS_INT,
- AU1550_USB_HOST_INT,
- AU1000_USB_HOST_INT = AU1550_USB_HOST_INT,
- AU1550_MAC0_DMA_INT,
- AU1550_MAC1_DMA_INT,
- AU1000_GPIO_0 = AU1550_FIRST_INT + 32,
- AU1000_GPIO_1,
- AU1000_GPIO_2,
- AU1000_GPIO_3,
- AU1000_GPIO_4,
- AU1000_GPIO_5,
- AU1000_GPIO_6,
- AU1000_GPIO_7,
- AU1000_GPIO_8,
- AU1000_GPIO_9,
- AU1000_GPIO_10,
- AU1000_GPIO_11,
- AU1000_GPIO_12,
- AU1000_GPIO_13,
- AU1000_GPIO_14,
- AU1000_GPIO_15,
- AU1550_GPIO_200,
- AU1500_GPIO_201_205, /* Logical or of GPIO201:205 */
- AU1500_GPIO_16,
- AU1500_GPIO_17,
- AU1500_GPIO_20,
- AU1500_GPIO_21,
- AU1500_GPIO_22,
- AU1500_GPIO_23,
- AU1500_GPIO_24,
- AU1500_GPIO_25,
- AU1500_GPIO_26,
- AU1500_GPIO_27,
- AU1500_GPIO_28,
- AU1500_GPIO_206,
- AU1500_GPIO_207,
- AU1500_GPIO_208_218, /* Logical or of GPIO208:218 */
-};
-
-/* shortcuts */
-#define INTA AU1550_PCI_INTA
-#define INTB AU1550_PCI_INTB
-#define INTC AU1550_PCI_INTC
-#define INTD AU1550_PCI_INTD
-
#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
-#define UART3_ADDR 0xB1400000
#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */
#define USB_OHCI_LEN 0x00060000
#define USB_HOST_CONFIG 0xB4027ffc
+#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT
#define AU1550_ETH0_BASE 0xB0500000
#define AU1550_ETH1_BASE 0xB0510000
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1550 */
+
#ifdef CONFIG_SOC_AU1200
-enum soc_au1200_ints {
- AU1200_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
- AU1200_UART0_INT = AU1200_FIRST_INT,
- AU1200_SWT_INT,
- AU1200_SD_INT,
- AU1200_DDMA_INT,
- AU1200_MAE_BE_INT,
- AU1200_GPIO_200,
- AU1200_GPIO_201,
- AU1200_GPIO_202,
- AU1200_UART1_INT,
- AU1200_MAE_FE_INT,
- AU1200_PSC0_INT,
- AU1200_PSC1_INT,
- AU1200_AES_INT,
- AU1200_CAMERA_INT,
- AU1000_TOY_INT,
- AU1000_TOY_MATCH0_INT,
- AU1000_TOY_MATCH1_INT,
- AU1000_TOY_MATCH2_INT,
- AU1000_RTC_INT,
- AU1000_RTC_MATCH0_INT,
- AU1000_RTC_MATCH1_INT,
- AU1000_RTC_MATCH2_INT,
- AU1200_GPIO_203,
- AU1200_NAND_INT,
- AU1200_GPIO_204,
- AU1200_GPIO_205,
- AU1200_GPIO_206,
- AU1200_GPIO_207,
- AU1200_GPIO_208_215, /* Logical OR of 208:215 */
- AU1200_USB_INT,
- AU1000_USB_HOST_INT = AU1200_USB_INT,
- AU1200_LCD_INT,
- AU1200_MAE_BOTH_INT,
- AU1000_GPIO_0,
- AU1000_GPIO_1,
- AU1000_GPIO_2,
- AU1000_GPIO_3,
- AU1000_GPIO_4,
- AU1000_GPIO_5,
- AU1000_GPIO_6,
- AU1000_GPIO_7,
- AU1000_GPIO_8,
- AU1000_GPIO_9,
- AU1000_GPIO_10,
- AU1000_GPIO_11,
- AU1000_GPIO_12,
- AU1000_GPIO_13,
- AU1000_GPIO_14,
- AU1000_GPIO_15,
- AU1000_GPIO_16,
- AU1000_GPIO_17,
- AU1000_GPIO_18,
- AU1000_GPIO_19,
- AU1000_GPIO_20,
- AU1000_GPIO_21,
- AU1000_GPIO_22,
- AU1000_GPIO_23,
- AU1000_GPIO_24,
- AU1000_GPIO_25,
- AU1000_GPIO_26,
- AU1000_GPIO_27,
- AU1000_GPIO_28,
- AU1000_GPIO_29,
- AU1000_GPIO_30,
- AU1000_GPIO_31,
-};
#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
#define USB_UOC_BASE 0x14020020
#define USB_UOC_LEN 0x20
#define USBMSRMCFG_RDCOMB 30
#define USBMSRMCFG_PFEN 31
-#endif /* CONFIG_SOC_AU1200 */
-
-#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8)
-#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31)
-#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_BASE + 32)
-#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31)
+#define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT
-#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST
-#define INTX 0xFF /* not valid */
+#endif /* CONFIG_SOC_AU1200 */
/* Programmable Counters 0 and 1 */
#define SYS_BASE 0xB1900000
#define MAC_RX_BUFF3_STATUS 0x30
#define MAC_RX_BUFF3_ADDR 0x34
-/* UARTS 0-3 */
-#define UART_BASE UART0_ADDR
-#ifdef CONFIG_SOC_AU1200
-#define UART_DEBUG_BASE UART1_ADDR
-#else
-#define UART_DEBUG_BASE UART3_ADDR
-#endif
-
#define UART_RX 0 /* Receive buffer */
#define UART_TX 4 /* Transmit buffer */
#define UART_IER 8 /* Interrupt Enable Register */
#define UART_CLK 0x28 /* Baud Rate Clock Divider */
#define UART_MOD_CNTRL 0x100 /* Module Control */
-#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
-#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
-#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
-#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
-#define UART_FCR_TRIGGER_MASK 0xF0 /* Mask for the FIFO trigger range */
-#define UART_FCR_R_TRIGGER_1 0x00 /* Mask for receive trigger set at 1 */
-#define UART_FCR_R_TRIGGER_4 0x40 /* Mask for receive trigger set at 4 */
-#define UART_FCR_R_TRIGGER_8 0x80 /* Mask for receive trigger set at 8 */
-#define UART_FCR_R_TRIGGER_14 0xA0 /* Mask for receive trigger set at 14 */
-#define UART_FCR_T_TRIGGER_0 0x00 /* Mask for transmit trigger set at 0 */
-#define UART_FCR_T_TRIGGER_4 0x10 /* Mask for transmit trigger set at 4 */
-#define UART_FCR_T_TRIGGER_8 0x20 /* Mask for transmit trigger set at 8 */
-#define UART_FCR_T_TRIGGER_12 0x30 /* Mask for transmit trigger set at 12 */
-
-/*
- * These are the definitions for the Line Control Register
- */
-#define UART_LCR_SBC 0x40 /* Set break control */
-#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
-#define UART_LCR_EPAR 0x10 /* Even parity select */
-#define UART_LCR_PARITY 0x08 /* Parity Enable */
-#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */
-#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
-#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
-#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
-#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
-
-/*
- * These are the definitions for the Line Status Register
- */
-#define UART_LSR_TEMT 0x40 /* Transmitter empty */
-#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
-#define UART_LSR_BI 0x10 /* Break interrupt indicator */
-#define UART_LSR_FE 0x08 /* Frame error indicator */
-#define UART_LSR_PE 0x04 /* Parity error indicator */
-#define UART_LSR_OE 0x02 /* Overrun error indicator */
-#define UART_LSR_DR 0x01 /* Receiver data ready */
-
-/*
- * These are the definitions for the Interrupt Identification Register
- */
-#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
-#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
-#define UART_IIR_MSI 0x00 /* Modem status interrupt */
-#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
-#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
-#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
-
-/*
- * These are the definitions for the Interrupt Enable Register
- */
-#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
-#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
-#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
-#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
-
-/*
- * These are the definitions for the Modem Control Register
- */
-#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
-#define UART_MCR_OUT2 0x08 /* Out2 complement */
-#define UART_MCR_OUT1 0x04 /* Out1 complement */
-#define UART_MCR_RTS 0x02 /* RTS complement */
-#define UART_MCR_DTR 0x01 /* DTR complement */
-
-/*
- * These are the definitions for the Modem Status Register
- */
-#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
-#define UART_MSR_RI 0x40 /* Ring Indicator */
-#define UART_MSR_DSR 0x20 /* Data Set Ready */
-#define UART_MSR_CTS 0x10 /* Clear to Send */
-#define UART_MSR_DDCD 0x08 /* Delta DCD */
-#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
-#define UART_MSR_DDSR 0x02 /* Delta DSR */
-#define UART_MSR_DCTS 0x01 /* Delta CTS */
-#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
-
/* SSIO */
#define SSI0_STATUS 0xB1600000
# define SSI_STATUS_BF (1 << 4)
#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
#define IOPORT_RESOURCE_END 0xffffffff
#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_END 0xfffffffffULL
#else /* Au1000 and Au1100 and Au1200 */
#define IOPORT_RESOURCE_START 0x10000000
#define IOPORT_RESOURCE_END 0xffffffff
#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_END 0xfffffffffULL
#define PCI_IO_START 0
#define PCI_IO_END 0
#endif
-#ifndef _LANGUAGE_ASSEMBLY
-typedef volatile struct {
- /* 0x0000 */ u32 toytrim;
- /* 0x0004 */ u32 toywrite;
- /* 0x0008 */ u32 toymatch0;
- /* 0x000C */ u32 toymatch1;
- /* 0x0010 */ u32 toymatch2;
- /* 0x0014 */ u32 cntrctrl;
- /* 0x0018 */ u32 scratch0;
- /* 0x001C */ u32 scratch1;
- /* 0x0020 */ u32 freqctrl0;
- /* 0x0024 */ u32 freqctrl1;
- /* 0x0028 */ u32 clksrc;
- /* 0x002C */ u32 pinfunc;
- /* 0x0030 */ u32 reserved0;
- /* 0x0034 */ u32 wakemsk;
- /* 0x0038 */ u32 endian;
- /* 0x003C */ u32 powerctrl;
- /* 0x0040 */ u32 toyread;
- /* 0x0044 */ u32 rtctrim;
- /* 0x0048 */ u32 rtcwrite;
- /* 0x004C */ u32 rtcmatch0;
- /* 0x0050 */ u32 rtcmatch1;
- /* 0x0054 */ u32 rtcmatch2;
- /* 0x0058 */ u32 rtcread;
- /* 0x005C */ u32 wakesrc;
- /* 0x0060 */ u32 cpupll;
- /* 0x0064 */ u32 auxpll;
- /* 0x0068 */ u32 reserved1;
- /* 0x006C */ u32 reserved2;
- /* 0x0070 */ u32 reserved3;
- /* 0x0074 */ u32 reserved4;
- /* 0x0078 */ u32 slppwr;
- /* 0x007C */ u32 sleep;
- /* 0x0080 */ u32 reserved5[32];
- /* 0x0100 */ u32 trioutrd;
-#define trioutclr trioutrd
- /* 0x0104 */ u32 reserved6;
- /* 0x0108 */ u32 outputrd;
-#define outputset outputrd
- /* 0x010C */ u32 outputclr;
- /* 0x0110 */ u32 pinstaterd;
-#define pininputen pinstaterd
-} AU1X00_SYS;
-
-static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE;
-
-#endif
-
#endif
int(*card_readonly)(void *mmc_host);
void(*set_power)(void *mmc_host, int state);
struct led_classdev *led;
+ unsigned long mask_host_caps;
};
#define SD0_BASE 0xB0600000
#endif /* __ASM_AU1100_MMC_H */
-
u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
/* Put buffers on source/destination descriptors. */
-u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
-u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
+u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags);
+u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags);
/* Get a buffer from the destination descriptor. */
u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
void au1xxx_dbdma_resume(void);
#endif
-
-/*
- * Some compatibilty macros -- needed to make changes to API
- * without breaking existing drivers.
- */
-#define au1xxx_dbdma_put_source(chanid, buf, nbytes) \
- _au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
-#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) \
- _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
-#define put_source_flags(chanid, buf, nbytes, flags) \
- au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)
-
-#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) \
- _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
-#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) \
- _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
-#define put_dest_flags(chanid, buf, nbytes, flags) \
- au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags)
-
/*
* Flags for the put_source/put_dest functions.
*/
--- /dev/null
+#ifndef __AU1X00_ETH_DATA_H
+#define __AU1X00_ETH_DATA_H
+
+/* Platform specific PHY configuration passed to the MAC driver */
+struct au1000_eth_platform_data {
+ int phy_static_config;
+ int phy_search_highest_addr;
+ int phy1_search_mac0;
+ int phy_addr;
+ int phy_busid;
+ int phy_irq;
+};
+
+void __init au1xxx_override_eth_cfg(unsigned port,
+ struct au1000_eth_platform_data *eth_data);
+
+#endif /* __AU1X00_ETH_DATA_H */
return -ENXIO;
}
-#ifdef CONFIG_SOC_AU1000
static inline int au1000_irq_to_gpio(int irq)
{
- if ((irq >= AU1000_GPIO_0) && (irq <= AU1000_GPIO_31))
- return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
+ if ((irq >= AU1000_GPIO0_INT) && (irq <= AU1000_GPIO31_INT))
+ return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO0_INT) + 0;
return -ENXIO;
}
-#endif
static inline int au1500_gpio1_to_irq(int gpio)
{
return -ENXIO;
}
-#ifdef CONFIG_SOC_AU1500
static inline int au1500_irq_to_gpio(int irq)
{
switch (irq) {
- case AU1000_GPIO_0 ... AU1000_GPIO_15:
- case AU1500_GPIO_20:
- case AU1500_GPIO_23 ... AU1500_GPIO_28:
- return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
- case AU1500_GPIO_200 ... AU1500_GPIO_203:
- return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_200) + 0;
- case AU1500_GPIO_204 ... AU1500_GPIO_205:
- return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_204) + 4;
- case AU1500_GPIO_206 ... AU1500_GPIO_207:
- return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6;
- case AU1500_GPIO_208_215:
+ case AU1500_GPIO0_INT ... AU1500_GPIO15_INT:
+ case AU1500_GPIO20_INT:
+ case AU1500_GPIO23_INT ... AU1500_GPIO28_INT:
+ return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO0_INT) + 0;
+ case AU1500_GPIO200_INT ... AU1500_GPIO203_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO200_INT) + 0;
+ case AU1500_GPIO204_INT ... AU1500_GPIO205_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO204_INT) + 4;
+ case AU1500_GPIO206_INT ... AU1500_GPIO207_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO206_INT) + 6;
+ case AU1500_GPIO208_215_INT:
return ALCHEMY_GPIO2_BASE + 8;
}
return -ENXIO;
}
-#endif
static inline int au1100_gpio1_to_irq(int gpio)
{
return -ENXIO;
}
-#ifdef CONFIG_SOC_AU1100
static inline int au1100_irq_to_gpio(int irq)
{
switch (irq) {
- case AU1000_GPIO_0 ... AU1000_GPIO_31:
- return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
- case AU1100_GPIO_208_215:
+ case AU1100_GPIO0_INT ... AU1100_GPIO31_INT:
+ return ALCHEMY_GPIO1_BASE + (irq - AU1100_GPIO0_INT) + 0;
+ case AU1100_GPIO208_215_INT:
return ALCHEMY_GPIO2_BASE + 8;
}
return -ENXIO;
}
-#endif
static inline int au1550_gpio1_to_irq(int gpio)
{
return -ENXIO;
}
-#ifdef CONFIG_SOC_AU1550
static inline int au1550_irq_to_gpio(int irq)
{
switch (irq) {
- case AU1000_GPIO_0 ... AU1000_GPIO_15:
- return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
- case AU1550_GPIO_200:
- case AU1500_GPIO_201_205:
- return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO_200) + 0;
- case AU1500_GPIO_16 ... AU1500_GPIO_28:
- return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO_16) + 16;
- case AU1500_GPIO_206 ... AU1500_GPIO_208_218:
- return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6;
+ case AU1550_GPIO0_INT ... AU1550_GPIO15_INT:
+ return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO0_INT) + 0;
+ case AU1550_GPIO200_INT:
+ case AU1550_GPIO201_205_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO200_INT) + 0;
+ case AU1550_GPIO16_INT ... AU1550_GPIO28_INT:
+ return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO16_INT) + 16;
+ case AU1550_GPIO206_INT ... AU1550_GPIO208_215_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO206_INT) + 6;
}
return -ENXIO;
}
-#endif
static inline int au1200_gpio1_to_irq(int gpio)
{
return -ENXIO;
}
-#ifdef CONFIG_SOC_AU1200
static inline int au1200_irq_to_gpio(int irq)
{
switch (irq) {
- case AU1000_GPIO_0 ... AU1000_GPIO_31:
- return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0;
- case AU1200_GPIO_200 ... AU1200_GPIO_202:
- return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_200) + 0;
- case AU1200_GPIO_203:
+ case AU1200_GPIO0_INT ... AU1200_GPIO31_INT:
+ return ALCHEMY_GPIO1_BASE + (irq - AU1200_GPIO0_INT) + 0;
+ case AU1200_GPIO200_INT ... AU1200_GPIO202_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO200_INT) + 0;
+ case AU1200_GPIO203_INT:
return ALCHEMY_GPIO2_BASE + 3;
- case AU1200_GPIO_204 ... AU1200_GPIO_208_215:
- return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_204) + 4;
+ case AU1200_GPIO204_INT ... AU1200_GPIO208_215_INT:
+ return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO204_INT) + 4;
}
return -ENXIO;
}
-#endif
/*
* GPIO1 block macros for common linux gpio functions.
static inline int alchemy_gpio1_to_irq(int gpio)
{
-#if defined(CONFIG_SOC_AU1000)
- return au1000_gpio1_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1100)
- return au1100_gpio1_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1500)
- return au1500_gpio1_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1550)
- return au1550_gpio1_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1200)
- return au1200_gpio1_to_irq(gpio);
-#else
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ return au1000_gpio1_to_irq(gpio);
+ case ALCHEMY_CPU_AU1100:
+ return au1100_gpio1_to_irq(gpio);
+ case ALCHEMY_CPU_AU1500:
+ return au1500_gpio1_to_irq(gpio);
+ case ALCHEMY_CPU_AU1550:
+ return au1550_gpio1_to_irq(gpio);
+ case ALCHEMY_CPU_AU1200:
+ return au1200_gpio1_to_irq(gpio);
+ }
return -ENXIO;
-#endif
}
/*
static inline int alchemy_gpio2_to_irq(int gpio)
{
-#if defined(CONFIG_SOC_AU1000)
- return au1000_gpio2_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1100)
- return au1100_gpio2_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1500)
- return au1500_gpio2_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1550)
- return au1550_gpio2_to_irq(gpio);
-#elif defined(CONFIG_SOC_AU1200)
- return au1200_gpio2_to_irq(gpio);
-#else
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ return au1000_gpio2_to_irq(gpio);
+ case ALCHEMY_CPU_AU1100:
+ return au1100_gpio2_to_irq(gpio);
+ case ALCHEMY_CPU_AU1500:
+ return au1500_gpio2_to_irq(gpio);
+ case ALCHEMY_CPU_AU1550:
+ return au1550_gpio2_to_irq(gpio);
+ case ALCHEMY_CPU_AU1200:
+ return au1200_gpio2_to_irq(gpio);
+ }
return -ENXIO;
-#endif
}
/**********************************************************************/
gpio2 -= ALCHEMY_GPIO2_BASE;
-#if defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500)
/* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
- gpio2 -= 8;
-#endif
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1100:
+ case ALCHEMY_CPU_AU1500:
+ gpio2 -= 8;
+ }
+
local_irq_save(flags);
__alchemy_gpio2_mod_int(gpio2, 1);
local_irq_restore(flags);
gpio2 -= ALCHEMY_GPIO2_BASE;
-#if defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500)
/* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */
- gpio2 -= 8;
-#endif
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1100:
+ case ALCHEMY_CPU_AU1500:
+ gpio2 -= 8;
+ }
+
local_irq_save(flags);
__alchemy_gpio2_mod_int(gpio2, 0);
local_irq_restore(flags);
static inline int alchemy_irq_to_gpio(int irq)
{
-#if defined(CONFIG_SOC_AU1000)
- return au1000_irq_to_gpio(irq);
-#elif defined(CONFIG_SOC_AU1100)
- return au1100_irq_to_gpio(irq);
-#elif defined(CONFIG_SOC_AU1500)
- return au1500_irq_to_gpio(irq);
-#elif defined(CONFIG_SOC_AU1550)
- return au1550_irq_to_gpio(irq);
-#elif defined(CONFIG_SOC_AU1200)
- return au1200_irq_to_gpio(irq);
-#else
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ return au1000_irq_to_gpio(irq);
+ case ALCHEMY_CPU_AU1100:
+ return au1100_irq_to_gpio(irq);
+ case ALCHEMY_CPU_AU1500:
+ return au1500_irq_to_gpio(irq);
+ case ALCHEMY_CPU_AU1550:
+ return au1550_irq_to_gpio(irq);
+ case ALCHEMY_CPU_AU1200:
+ return au1200_irq_to_gpio(irq);
+ }
return -ENXIO;
-#endif
}
/**********************************************************************/
#ifndef _ALCHEMY_GPIO_H_
#define _ALCHEMY_GPIO_H_
-#if defined(CONFIG_ALCHEMY_GPIO_AU1000)
+#if defined(CONFIG_ALCHEMY_GPIOINT_AU1000)
#include <asm/mach-au1x00/gpio-au1000.h>
#include <linux/types.h>
-#ifdef CONFIG_64BIT_PHYS_ADDR
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI)
extern phys_t __fixup_bigphys_addr(phys_t, phys_t);
#else
static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
extern char **prom_envp;
extern void prom_init_cmdline(void);
-extern char *prom_getcmdline(void);
extern char *prom_getenv(char *envname);
extern int prom_get_ethernet_addr(char *ethernet_addr);
#define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT)
#endif /* BCM63XX_REGS_H_ */
-
#define cpu_has_vint 0
#define cpu_has_veic 0
#define cpu_hwrena_impl_bits 0xc0000000
+
+#define kernel_uses_smartmips_rixi (cpu_data[0].cputype == CPU_CAVIUM_OCTEON_PLUS)
+
#define ARCH_HAS_READ_CURRENT_TIMER 1
#define ARCH_HAS_IRQ_PER_CPU 1
#define ARCH_HAS_SPINLOCK_PREFETCH 1
--- /dev/null
+/*
+ * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
+ *
+ * All Alchemy development boards (except, of course, the weird PB1000)
+ * have a few registers in a CPLD with standardised layout; they mostly
+ * only differ in base address and bit meanings in the RESETS and BOARD
+ * registers.
+ *
+ * All data taken from the official AMD board documentation sheets.
+ */
+
+#ifndef _DB1XXX_BCSR_H_
+#define _DB1XXX_BCSR_H_
+
+
+/* BCSR base addresses on various boards. BCSR base 2 refers to the
+ * physical address of the first HEXLEDS register, which is usually
+ * a variable offset from the WHOAMI register.
+ */
+
+/* DB1000, DB1100, DB1500, PB1100, PB1500 */
+#define DB1000_BCSR_PHYS_ADDR 0x0E000000
+#define DB1000_BCSR_HEXLED_OFS 0x01000000
+
+#define DB1550_BCSR_PHYS_ADDR 0x0F000000
+#define DB1550_BCSR_HEXLED_OFS 0x00400000
+
+#define PB1550_BCSR_PHYS_ADDR 0x0F000000
+#define PB1550_BCSR_HEXLED_OFS 0x00800000
+
+#define DB1200_BCSR_PHYS_ADDR 0x19800000
+#define DB1200_BCSR_HEXLED_OFS 0x00400000
+
+#define PB1200_BCSR_PHYS_ADDR 0x0D800000
+#define PB1200_BCSR_HEXLED_OFS 0x00400000
+
+
+enum bcsr_id {
+ /* BCSR base 1 */
+ BCSR_WHOAMI = 0,
+ BCSR_STATUS,
+ BCSR_SWITCHES,
+ BCSR_RESETS,
+ BCSR_PCMCIA,
+ BCSR_BOARD,
+ BCSR_LEDS,
+ BCSR_SYSTEM,
+ /* Au1200/1300 based boards */
+ BCSR_INTCLR,
+ BCSR_INTSET,
+ BCSR_MASKCLR,
+ BCSR_MASKSET,
+ BCSR_SIGSTAT,
+ BCSR_INTSTAT,
+
+ /* BCSR base 2 */
+ BCSR_HEXLEDS,
+ BCSR_RSVD1,
+ BCSR_HEXCLEAR,
+
+ BCSR_CNT,
+};
+
+/* register offsets, valid for all Db1xxx/Pb1xxx boards */
+#define BCSR_REG_WHOAMI 0x00
+#define BCSR_REG_STATUS 0x04
+#define BCSR_REG_SWITCHES 0x08
+#define BCSR_REG_RESETS 0x0c
+#define BCSR_REG_PCMCIA 0x10
+#define BCSR_REG_BOARD 0x14
+#define BCSR_REG_LEDS 0x18
+#define BCSR_REG_SYSTEM 0x1c
+/* Au1200/Au1300 based boards: CPLD IRQ muxer */
+#define BCSR_REG_INTCLR 0x20
+#define BCSR_REG_INTSET 0x24
+#define BCSR_REG_MASKCLR 0x28
+#define BCSR_REG_MASKSET 0x2c
+#define BCSR_REG_SIGSTAT 0x30
+#define BCSR_REG_INTSTAT 0x34
+
+/* hexled control, offset from BCSR base 2 */
+#define BCSR_REG_HEXLEDS 0x00
+#define BCSR_REG_HEXCLEAR 0x08
+
+/*
+ * Register Bits and Pieces.
+ */
+#define BCSR_WHOAMI_DCID(x) ((x) & 0xf)
+#define BCSR_WHOAMI_CPLD(x) (((x) >> 4) & 0xf)
+#define BCSR_WHOAMI_BOARD(x) (((x) >> 8) & 0xf)
+
+/* register "WHOAMI" bits 11:8 identify the board */
+enum bcsr_whoami_boards {
+ BCSR_WHOAMI_PB1500 = 1,
+ BCSR_WHOAMI_PB1500R2,
+ BCSR_WHOAMI_PB1100,
+ BCSR_WHOAMI_DB1000,
+ BCSR_WHOAMI_DB1100,
+ BCSR_WHOAMI_DB1500,
+ BCSR_WHOAMI_DB1550,
+ BCSR_WHOAMI_PB1550_DDR,
+ BCSR_WHOAMI_PB1550 = BCSR_WHOAMI_PB1550_DDR,
+ BCSR_WHOAMI_PB1550_SDR,
+ BCSR_WHOAMI_PB1200_DDR1,
+ BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1,
+ BCSR_WHOAMI_PB1200_DDR2,
+ BCSR_WHOAMI_DB1200,
+};
+
+/* STATUS reg. Unless otherwise noted, they're valid on all boards.
+ * PB1200 = DB1200.
+ */
+#define BCSR_STATUS_PC0VS 0x0003
+#define BCSR_STATUS_PC1VS 0x000C
+#define BCSR_STATUS_PC0FI 0x0010
+#define BCSR_STATUS_PC1FI 0x0020
+#define BCSR_STATUS_PB1550_SWAPBOOT 0x0040
+#define BCSR_STATUS_SRAMWIDTH 0x0080
+#define BCSR_STATUS_FLASHBUSY 0x0100
+#define BCSR_STATUS_ROMBUSY 0x0400
+#define BCSR_STATUS_SD0WP 0x0400 /* DB1200 */
+#define BCSR_STATUS_SD1WP 0x0800
+#define BCSR_STATUS_USBOTGID 0x0800 /* PB/DB1550 */
+#define BCSR_STATUS_DB1000_SWAPBOOT 0x2000
+#define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200 */
+#define BCSR_STATUS_IDECBLID 0x0200 /* DB1200 */
+#define BCSR_STATUS_DB1200_U0RXD 0x1000 /* DB1200 */
+#define BCSR_STATUS_DB1200_U1RXD 0x2000 /* DB1200 */
+#define BCSR_STATUS_FLASHDEN 0xC000
+#define BCSR_STATUS_DB1550_U0RXD 0x1000 /* DB1550 */
+#define BCSR_STATUS_DB1550_U3RXD 0x2000 /* DB1550 */
+#define BCSR_STATUS_PB1550_U0RXD 0x1000 /* PB1550 */
+#define BCSR_STATUS_PB1550_U1RXD 0x2000 /* PB1550 */
+#define BCSR_STATUS_PB1550_U3RXD 0x8000 /* PB1550 */
+
+
+/* DB/PB1000,1100,1500,1550 */
+#define BCSR_RESETS_PHY0 0x0001
+#define BCSR_RESETS_PHY1 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_FIR_SEL 0x2000
+#define BCSR_RESETS_IRDA_MODE_MASK 0xC000
+#define BCSR_RESETS_IRDA_MODE_FULL 0x0000
+#define BCSR_RESETS_PB1550_WSCFSM 0x2000
+#define BCSR_RESETS_IRDA_MODE_OFF 0x4000
+#define BCSR_RESETS_IRDA_MODE_2_3 0x8000
+#define BCSR_RESETS_IRDA_MODE_1_3 0xC000
+#define BCSR_RESETS_DMAREQ 0x8000 /* PB1550 */
+
+#define BCSR_BOARD_PCIM66EN 0x0001
+#define BCSR_BOARD_SD0PWR 0x0040
+#define BCSR_BOARD_SD1PWR 0x0080
+#define BCSR_BOARD_PCIM33 0x0100
+#define BCSR_BOARD_PCIEXTARB 0x0200
+#define BCSR_BOARD_GPIO200RST 0x0400
+#define BCSR_BOARD_PCICLKOUT 0x0800
+#define BCSR_BOARD_PCICFG 0x1000
+#define BCSR_BOARD_SPISEL 0x4000 /* PB/DB1550 */
+#define BCSR_BOARD_SD0WP 0x4000 /* DB1100 */
+#define BCSR_BOARD_SD1WP 0x8000 /* DB1100 */
+
+
+/* DB/PB1200 */
+#define BCSR_RESETS_ETH 0x0001
+#define BCSR_RESETS_CAMERA 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_IDE 0x0008
+#define BCSR_RESETS_TV 0x0010 /* DB1200 */
+/* Not resets but in the same register */
+#define BCSR_RESETS_PWMR1MUX 0x0800 /* DB1200 */
+#define BCSR_RESETS_PB1200_WSCFSM 0x0800 /* PB1200 */
+#define BCSR_RESETS_PSC0MUX 0x1000
+#define BCSR_RESETS_PSC1MUX 0x2000
+#define BCSR_RESETS_SPISEL 0x4000
+#define BCSR_RESETS_SD1MUX 0x8000 /* PB1200 */
+
+#define BCSR_BOARD_LCDVEE 0x0001
+#define BCSR_BOARD_LCDVDD 0x0002
+#define BCSR_BOARD_LCDBL 0x0004
+#define BCSR_BOARD_CAMSNAP 0x0010
+#define BCSR_BOARD_CAMPWR 0x0020
+#define BCSR_BOARD_SD0PWR 0x0040
+
+
+#define BCSR_SWITCHES_DIP 0x00FF
+#define BCSR_SWITCHES_DIP_1 0x0080
+#define BCSR_SWITCHES_DIP_2 0x0040
+#define BCSR_SWITCHES_DIP_3 0x0020
+#define BCSR_SWITCHES_DIP_4 0x0010
+#define BCSR_SWITCHES_DIP_5 0x0008
+#define BCSR_SWITCHES_DIP_6 0x0004
+#define BCSR_SWITCHES_DIP_7 0x0002
+#define BCSR_SWITCHES_DIP_8 0x0001
+#define BCSR_SWITCHES_ROTARY 0x0F00
+
+
+#define BCSR_PCMCIA_PC0VPP 0x0003
+#define BCSR_PCMCIA_PC0VCC 0x000C
+#define BCSR_PCMCIA_PC0DRVEN 0x0010
+#define BCSR_PCMCIA_PC0RST 0x0080
+#define BCSR_PCMCIA_PC1VPP 0x0300
+#define BCSR_PCMCIA_PC1VCC 0x0C00
+#define BCSR_PCMCIA_PC1DRVEN 0x1000
+#define BCSR_PCMCIA_PC1RST 0x8000
+
+
+#define BCSR_LEDS_DECIMALS 0x0003
+#define BCSR_LEDS_LED0 0x0100
+#define BCSR_LEDS_LED1 0x0200
+#define BCSR_LEDS_LED2 0x0400
+#define BCSR_LEDS_LED3 0x0800
+
+
+#define BCSR_SYSTEM_RESET 0x8000 /* clear to reset */
+#define BCSR_SYSTEM_PWROFF 0x4000 /* set to power off */
+#define BCSR_SYSTEM_VDDI 0x001F /* PB1xxx boards */
+
+
+
+
+/* initialize BCSR for a board. Provide the PHYSICAL addresses of both
+ * BCSR spaces.
+ */
+void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys);
+
+/* read a board register */
+unsigned short bcsr_read(enum bcsr_id reg);
+
+/* write to a board register */
+void bcsr_write(enum bcsr_id reg, unsigned short val);
+
+/* modify a register. clear bits set in 'clr', set bits set in 'set' */
+void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set);
+
+/* install CPLD IRQ demuxer (DB1200/PB1200) */
+void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq);
+
+#endif
#define __ASM_DB1200_H
#include <linux/types.h>
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-
-/*
- * SPI and SMB are muxed on the DBAu1200 board.
- * Refer to board documentation.
- */
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE PSC0_BASE_ADDR
-/*
- * AC'97 and I2S are muxed on the DBAu1200 board.
- * Refer to board documentation.
- */
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define I2S_PSC_BASE PSC1_BASE_ADDR
-
-#define BCSR_KSEG1_ADDR 0xB9800000
-
-typedef volatile struct
-{
- /*00*/ u16 whoami;
- u16 reserved0;
- /*04*/ u16 status;
- u16 reserved1;
- /*08*/ u16 switches;
- u16 reserved2;
- /*0C*/ u16 resets;
- u16 reserved3;
-
- /*10*/ u16 pcmcia;
- u16 reserved4;
- /*14*/ u16 board;
- u16 reserved5;
- /*18*/ u16 disk_leds;
- u16 reserved6;
- /*1C*/ u16 system;
- u16 reserved7;
-
- /*20*/ u16 intclr;
- u16 reserved8;
- /*24*/ u16 intset;
- u16 reserved9;
- /*28*/ u16 intclr_mask;
- u16 reserved10;
- /*2C*/ u16 intset_mask;
- u16 reserved11;
-
- /*30*/ u16 sig_status;
- u16 reserved12;
- /*34*/ u16 int_status;
- u16 reserved13;
- /*38*/ u16 reserved14;
- u16 reserved15;
- /*3C*/ u16 reserved16;
- u16 reserved17;
-
-} BCSR;
-
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-/*
- * Register bit definitions for the BCSRs
- */
-#define BCSR_WHOAMI_DCID 0x000F
-#define BCSR_WHOAMI_CPLD 0x00F0
-#define BCSR_WHOAMI_BOARD 0x0F00
-
-#define BCSR_STATUS_PCMCIA0VS 0x0003
-#define BCSR_STATUS_PCMCIA1VS 0x000C
-#define BCSR_STATUS_SWAPBOOT 0x0040
-#define BCSR_STATUS_FLASHBUSY 0x0100
-#define BCSR_STATUS_IDECBLID 0x0200
-#define BCSR_STATUS_SD0WP 0x0400
-#define BCSR_STATUS_U0RXD 0x1000
-#define BCSR_STATUS_U1RXD 0x2000
-
-#define BCSR_SWITCHES_OCTAL 0x00FF
-#define BCSR_SWITCHES_DIP_1 0x0080
-#define BCSR_SWITCHES_DIP_2 0x0040
-#define BCSR_SWITCHES_DIP_3 0x0020
-#define BCSR_SWITCHES_DIP_4 0x0010
-#define BCSR_SWITCHES_DIP_5 0x0008
-#define BCSR_SWITCHES_DIP_6 0x0004
-#define BCSR_SWITCHES_DIP_7 0x0002
-#define BCSR_SWITCHES_DIP_8 0x0001
-#define BCSR_SWITCHES_ROTARY 0x0F00
-
-#define BCSR_RESETS_ETH 0x0001
-#define BCSR_RESETS_CAMERA 0x0002
-#define BCSR_RESETS_DC 0x0004
-#define BCSR_RESETS_IDE 0x0008
-#define BCSR_RESETS_TV 0x0010
-/* Not resets but in the same register */
-#define BCSR_RESETS_PWMR1MUX 0x0800
-#define BCSR_RESETS_PCS0MUX 0x1000
-#define BCSR_RESETS_PCS1MUX 0x2000
-#define BCSR_RESETS_SPISEL 0x4000
-
-#define BCSR_PCMCIA_PC0VPP 0x0003
-#define BCSR_PCMCIA_PC0VCC 0x000C
-#define BCSR_PCMCIA_PC0DRVEN 0x0010
-#define BCSR_PCMCIA_PC0RST 0x0080
-#define BCSR_PCMCIA_PC1VPP 0x0300
-#define BCSR_PCMCIA_PC1VCC 0x0C00
-#define BCSR_PCMCIA_PC1DRVEN 0x1000
-#define BCSR_PCMCIA_PC1RST 0x8000
-
-#define BCSR_BOARD_LCDVEE 0x0001
-#define BCSR_BOARD_LCDVDD 0x0002
-#define BCSR_BOARD_LCDBL 0x0004
-#define BCSR_BOARD_CAMSNAP 0x0010
-#define BCSR_BOARD_CAMPWR 0x0020
-#define BCSR_BOARD_SD0PWR 0x0040
-
-#define BCSR_LEDS_DECIMALS 0x0003
-#define BCSR_LEDS_LED0 0x0100
-#define BCSR_LEDS_LED1 0x0200
-#define BCSR_LEDS_LED2 0x0400
-#define BCSR_LEDS_LED3 0x0800
-
-#define BCSR_SYSTEM_POWEROFF 0x4000
-#define BCSR_SYSTEM_RESET 0x8000
-
/* Bit positions for the different interrupt sources */
#define BCSR_INT_IDE 0x0001
#define BCSR_INT_ETH 0x0002
#define BCSR_INT_SD0INSERT 0x1000
#define BCSR_INT_SD0EJECT 0x2000
-#define SMC91C111_PHYS_ADDR 0x19000300
-#define SMC91C111_INT DB1200_ETH_INT
-
#define IDE_PHYS_ADDR 0x18800000
#define IDE_REG_SHIFT 5
-#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT)
-#define IDE_INT DB1200_IDE_INT
#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
#define IDE_RQSIZE 128
-#define NAND_PHYS_ADDR 0x20000000
+#define DB1200_IDE_PHYS_ADDR IDE_PHYS_ADDR
+#define DB1200_IDE_PHYS_LEN (16 << IDE_REG_SHIFT)
+#define DB1200_ETH_PHYS_ADDR 0x19000300
+#define DB1200_NAND_PHYS_ADDR 0x20000000
/*
* External Interrupts for DBAu1200 as of 8/6/2004.
* Example: IDE bis pos is = 64 - 64
* ETH bit pos is = 65 - 64
*/
-enum external_pb1200_ints {
+enum external_db1200_ints {
DB1200_INT_BEGIN = AU1000_MAX_INTR + 1,
DB1200_IDE_INT = DB1200_INT_BEGIN,
DB1200_INT_END = DB1200_INT_BEGIN + 15,
};
-
-/*
- * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
- */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
- ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
-#define BOARD_PC0_INT DB1200_PC0_INT
-#define BOARD_PC1_INT DB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
-
-/* NAND chip select */
-#define NAND_CS 1
-
#endif /* __ASM_DB1200_H */
#define SMBUS_PSC_BASE PSC2_BASE_ADDR
#define I2S_PSC_BASE PSC3_BASE_ADDR
-#define BCSR_KSEG1_ADDR 0xAF000000
#define NAND_PHYS_ADDR 0x20000000
-#else
-#define BCSR_KSEG1_ADDR 0xAE000000
#endif
-/*
- * Overlay data structure of the DBAu1x00 board registers.
- * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx.
- */
-typedef volatile struct
-{
- /*00*/ unsigned short whoami;
- unsigned short reserved0;
- /*04*/ unsigned short status;
- unsigned short reserved1;
- /*08*/ unsigned short switches;
- unsigned short reserved2;
- /*0C*/ unsigned short resets;
- unsigned short reserved3;
- /*10*/ unsigned short pcmcia;
- unsigned short reserved4;
- /*14*/ unsigned short specific;
- unsigned short reserved5;
- /*18*/ unsigned short leds;
- unsigned short reserved6;
- /*1C*/ unsigned short swreset;
- unsigned short reserved7;
-
-} BCSR;
-
-
-/*
- * Register/mask bit definitions for the BCSRs
- */
-#define BCSR_WHOAMI_DCID 0x000F
-#define BCSR_WHOAMI_CPLD 0x00F0
-#define BCSR_WHOAMI_BOARD 0x0F00
-
-#define BCSR_STATUS_PC0VS 0x0003
-#define BCSR_STATUS_PC1VS 0x000C
-#define BCSR_STATUS_PC0FI 0x0010
-#define BCSR_STATUS_PC1FI 0x0020
-#define BCSR_STATUS_FLASHBUSY 0x0100
-#define BCSR_STATUS_ROMBUSY 0x0400
-#define BCSR_STATUS_SWAPBOOT 0x2000
-#define BCSR_STATUS_FLASHDEN 0xC000
-
-#define BCSR_SWITCHES_DIP 0x00FF
-#define BCSR_SWITCHES_DIP_1 0x0080
-#define BCSR_SWITCHES_DIP_2 0x0040
-#define BCSR_SWITCHES_DIP_3 0x0020
-#define BCSR_SWITCHES_DIP_4 0x0010
-#define BCSR_SWITCHES_DIP_5 0x0008
-#define BCSR_SWITCHES_DIP_6 0x0004
-#define BCSR_SWITCHES_DIP_7 0x0002
-#define BCSR_SWITCHES_DIP_8 0x0001
-#define BCSR_SWITCHES_ROTARY 0x0F00
-
-#define BCSR_RESETS_PHY0 0x0001
-#define BCSR_RESETS_PHY1 0x0002
-#define BCSR_RESETS_DC 0x0004
-#define BCSR_RESETS_FIR_SEL 0x2000
-#define BCSR_RESETS_IRDA_MODE_MASK 0xC000
-#define BCSR_RESETS_IRDA_MODE_FULL 0x0000
-#define BCSR_RESETS_IRDA_MODE_OFF 0x4000
-#define BCSR_RESETS_IRDA_MODE_2_3 0x8000
-#define BCSR_RESETS_IRDA_MODE_1_3 0xC000
-
-#define BCSR_PCMCIA_PC0VPP 0x0003
-#define BCSR_PCMCIA_PC0VCC 0x000C
-#define BCSR_PCMCIA_PC0DRVEN 0x0010
-#define BCSR_PCMCIA_PC0RST 0x0080
-#define BCSR_PCMCIA_PC1VPP 0x0300
-#define BCSR_PCMCIA_PC1VCC 0x0C00
-#define BCSR_PCMCIA_PC1DRVEN 0x1000
-#define BCSR_PCMCIA_PC1RST 0x8000
-
-#define BCSR_BOARD_PCIM66EN 0x0001
-#define BCSR_BOARD_SD0_PWR 0x0040
-#define BCSR_BOARD_SD1_PWR 0x0080
-#define BCSR_BOARD_PCIM33 0x0100
-#define BCSR_BOARD_GPIO200RST 0x0400
-#define BCSR_BOARD_PCICFG 0x1000
-#define BCSR_BOARD_SD0_WP 0x4000
-#define BCSR_BOARD_SD1_WP 0x8000
-
-#define BCSR_LEDS_DECIMALS 0x0003
-#define BCSR_LEDS_LED0 0x0100
-#define BCSR_LEDS_LED1 0x0200
-#define BCSR_LEDS_LED2 0x0400
-#define BCSR_LEDS_LED3 0x0800
-
-#define BCSR_SWRESET_RESET 0x0080
-
-/* PCMCIA DBAu1x00 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
/*
* NAND defines
*
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Wu Zhangjin <wuzhangjin@gmail.com>
* Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
* Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
*
* the read/write interfaces for Virtual Support Module(VSM)
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
*/
#ifndef _CS5536_VSM_H
/*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
- *
*/
#ifndef __ASM_MACH_LOONGSON_LOONGSON_H
extern void mach_prepare_shutdown(void);
/* environment arguments from bootloader */
-extern unsigned long bus_clock, cpu_clock_freq;
+extern unsigned long cpu_clock_freq;
extern unsigned long memsize, highmemsize;
/* loongson-specific command line, env and memory initialization */
/*
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
/*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
/*
* Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
- * Copyright (c) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (c) 2009 Wu Zhangjin <wuzhangjin@gmail.com>
*
* This program is free software; you can redistribute it
* and/or modify it under the terms of the GNU General
* Public License as published by the Free Software
* Foundation; either version 2 of the License, or (at your
* option) any later version.
- *
- * This program is distributed in the hope that it will be
- * useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
- * 02139, USA.
*/
#ifndef __ASM_MACH_LOONGSON_PCI_H_
+++ /dev/null
-/*
- * Alchemy Semi Pb1100 Referrence Board
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#ifndef __ASM_PB1100_H
-#define __ASM_PB1100_H
-
-#define PB1100_IDENT 0xAE000000
-#define BOARD_STATUS_REG 0xAE000004
-# define PB1100_ROM_SEL (1 << 15)
-# define PB1100_ROM_SIZ (1 << 14)
-# define PB1100_SWAP_BOOT (1 << 13)
-# define PB1100_FLASH_WP (1 << 12)
-# define PB1100_ROM_H_STS (1 << 11)
-# define PB1100_ROM_L_STS (1 << 10)
-# define PB1100_FLASH_H_STS (1 << 9)
-# define PB1100_FLASH_L_STS (1 << 8)
-# define PB1100_SRAM_SIZ (1 << 7)
-# define PB1100_TSC_BUSY (1 << 6)
-# define PB1100_PCMCIA_VS_MASK (3 << 4)
-# define PB1100_RS232_CD (1 << 3)
-# define PB1100_RS232_CTS (1 << 2)
-# define PB1100_RS232_DSR (1 << 1)
-# define PB1100_RS232_RI (1 << 0)
-
-#define PB1100_IRDA_RS232 0xAE00000C
-# define PB1100_IRDA_FULL (0 << 14) /* full power */
-# define PB1100_IRDA_SHUTDOWN (1 << 14)
-# define PB1100_IRDA_TT (2 << 14) /* 2/3 power */
-# define PB1100_IRDA_OT (3 << 14) /* 1/3 power */
-# define PB1100_IRDA_FIR (1 << 13)
-
-#define PCMCIA_BOARD_REG 0xAE000010
-# define PB1100_SD_WP1_RO (1 << 15) /* read only */
-# define PB1100_SD_WP0_RO (1 << 14) /* read only */
-# define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */
-# define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */
-# define PB1100_SEL_SD_CONN1 (1 << 9)
-# define PB1100_SEL_SD_CONN0 (1 << 8)
-# define PC_DEASSERT_RST (1 << 7)
-# define PC_DRV_EN (1 << 4)
-
-#define PB1100_G_CONTROL 0xAE000014 /* graphics control */
-
-#define PB1100_RST_VDDI 0xAE00001C
-# define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */
-# define PB1100_VDDI_MASK 0x1F
-
-#define PB1100_LEDS 0xAE000018
-
-/*
- * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
- * 7:0 is the LED Display's decimal points.
- */
-#define PB1100_HEX_LED 0xAE000018
-
-/* PCMCIA Pb1100 specific defines */
-#define PCMCIA_MAX_SOCK 0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
-
-#endif /* __ASM_PB1100_H */
#define __ASM_PB1200_H
#include <linux/types.h>
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
* Refer to board documentation.
*/
#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define I2S_PSC_BASE PSC1_BASE_ADDR
+#define I2S_PSC_BASE PSC1_BASE_ADDR
-#define BCSR_KSEG1_ADDR 0xAD800000
-
-typedef volatile struct
-{
- /*00*/ u16 whoami;
- u16 reserved0;
- /*04*/ u16 status;
- u16 reserved1;
- /*08*/ u16 switches;
- u16 reserved2;
- /*0C*/ u16 resets;
- u16 reserved3;
-
- /*10*/ u16 pcmcia;
- u16 reserved4;
- /*14*/ u16 board;
- u16 reserved5;
- /*18*/ u16 disk_leds;
- u16 reserved6;
- /*1C*/ u16 system;
- u16 reserved7;
-
- /*20*/ u16 intclr;
- u16 reserved8;
- /*24*/ u16 intset;
- u16 reserved9;
- /*28*/ u16 intclr_mask;
- u16 reserved10;
- /*2C*/ u16 intset_mask;
- u16 reserved11;
-
- /*30*/ u16 sig_status;
- u16 reserved12;
- /*34*/ u16 int_status;
- u16 reserved13;
- /*38*/ u16 reserved14;
- u16 reserved15;
- /*3C*/ u16 reserved16;
- u16 reserved17;
-
-} BCSR;
-
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-/*
- * Register bit definitions for the BCSRs
- */
-#define BCSR_WHOAMI_DCID 0x000F
-#define BCSR_WHOAMI_CPLD 0x00F0
-#define BCSR_WHOAMI_BOARD 0x0F00
-
-#define BCSR_STATUS_PCMCIA0VS 0x0003
-#define BCSR_STATUS_PCMCIA1VS 0x000C
-#define BCSR_STATUS_SWAPBOOT 0x0040
-#define BCSR_STATUS_FLASHBUSY 0x0100
-#define BCSR_STATUS_IDECBLID 0x0200
-#define BCSR_STATUS_SD0WP 0x0400
-#define BCSR_STATUS_SD1WP 0x0800
-#define BCSR_STATUS_U0RXD 0x1000
-#define BCSR_STATUS_U1RXD 0x2000
-
-#define BCSR_SWITCHES_OCTAL 0x00FF
-#define BCSR_SWITCHES_DIP_1 0x0080
-#define BCSR_SWITCHES_DIP_2 0x0040
-#define BCSR_SWITCHES_DIP_3 0x0020
-#define BCSR_SWITCHES_DIP_4 0x0010
-#define BCSR_SWITCHES_DIP_5 0x0008
-#define BCSR_SWITCHES_DIP_6 0x0004
-#define BCSR_SWITCHES_DIP_7 0x0002
-#define BCSR_SWITCHES_DIP_8 0x0001
-#define BCSR_SWITCHES_ROTARY 0x0F00
-
-#define BCSR_RESETS_ETH 0x0001
-#define BCSR_RESETS_CAMERA 0x0002
-#define BCSR_RESETS_DC 0x0004
-#define BCSR_RESETS_IDE 0x0008
-/* not resets but in the same register */
-#define BCSR_RESETS_WSCFSM 0x0800
-#define BCSR_RESETS_PCS0MUX 0x1000
-#define BCSR_RESETS_PCS1MUX 0x2000
-#define BCSR_RESETS_SPISEL 0x4000
-#define BCSR_RESETS_SD1MUX 0x8000
-
-#define BCSR_PCMCIA_PC0VPP 0x0003
-#define BCSR_PCMCIA_PC0VCC 0x000C
-#define BCSR_PCMCIA_PC0DRVEN 0x0010
-#define BCSR_PCMCIA_PC0RST 0x0080
-#define BCSR_PCMCIA_PC1VPP 0x0300
-#define BCSR_PCMCIA_PC1VCC 0x0C00
-#define BCSR_PCMCIA_PC1DRVEN 0x1000
-#define BCSR_PCMCIA_PC1RST 0x8000
-
-#define BCSR_BOARD_LCDVEE 0x0001
-#define BCSR_BOARD_LCDVDD 0x0002
-#define BCSR_BOARD_LCDBL 0x0004
-#define BCSR_BOARD_CAMSNAP 0x0010
-#define BCSR_BOARD_CAMPWR 0x0020
-#define BCSR_BOARD_SD0PWR 0x0040
-#define BCSR_BOARD_SD1PWR 0x0080
-
-#define BCSR_LEDS_DECIMALS 0x00FF
-#define BCSR_LEDS_LED0 0x0100
-#define BCSR_LEDS_LED1 0x0200
-#define BCSR_LEDS_LED2 0x0400
-#define BCSR_LEDS_LED3 0x0800
#define BCSR_SYSTEM_VDDI 0x001F
#define BCSR_SYSTEM_POWEROFF 0x4000
PB1200_INT_END = PB1200_INT_BEGIN + 15
};
-/*
- * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
- */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
- ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
-#define BOARD_PC0_INT PB1200_PC0_INT
-#define BOARD_PC1_INT PB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
-
/* NAND chip select */
#define NAND_CS 1
+++ /dev/null
-/*
- * Alchemy Semi Pb1500 Referrence Board
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#ifndef __ASM_PB1500_H
-#define __ASM_PB1500_H
-
-#define IDENT_BOARD_REG 0xAE000000
-#define BOARD_STATUS_REG 0xAE000004
-#define PCI_BOARD_REG 0xAE000010
-#define PCMCIA_BOARD_REG 0xAE000010
-# define PC_DEASSERT_RST 0x80
-# define PC_DRV_EN 0x10
-#define PB1500_G_CONTROL 0xAE000014
-#define PB1500_RST_VDDI 0xAE00001C
-#define PB1500_LEDS 0xAE000018
-
-#define PB1500_HEX_LED 0xAF000004
-#define PB1500_HEX_LED_BLANK 0xAF000008
-
-/* PCMCIA Pb1500 specific defines */
-#define PCMCIA_MAX_SOCK 0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
-
-#endif /* __ASM_PB1500_H */
#define SMBUS_PSC_BASE PSC2_BASE_ADDR
#define I2S_PSC_BASE PSC3_BASE_ADDR
-#define BCSR_PHYS_ADDR 0xAF000000
-
-typedef volatile struct
-{
- /*00*/ u16 whoami;
- u16 reserved0;
- /*04*/ u16 status;
- u16 reserved1;
- /*08*/ u16 switches;
- u16 reserved2;
- /*0C*/ u16 resets;
- u16 reserved3;
- /*10*/ u16 pcmcia;
- u16 reserved4;
- /*14*/ u16 pci;
- u16 reserved5;
- /*18*/ u16 leds;
- u16 reserved6;
- /*1C*/ u16 system;
- u16 reserved7;
-
-} BCSR;
-
-static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR;
-
-/*
- * Register bit definitions for the BCSRs
- */
-#define BCSR_WHOAMI_DCID 0x000F
-#define BCSR_WHOAMI_CPLD 0x00F0
-#define BCSR_WHOAMI_BOARD 0x0F00
-
-#define BCSR_STATUS_PCMCIA0VS 0x0003
-#define BCSR_STATUS_PCMCIA1VS 0x000C
-#define BCSR_STATUS_PCMCIA0FI 0x0010
-#define BCSR_STATUS_PCMCIA1FI 0x0020
-#define BCSR_STATUS_SWAPBOOT 0x0040
-#define BCSR_STATUS_SRAMWIDTH 0x0080
-#define BCSR_STATUS_FLASHBUSY 0x0100
-#define BCSR_STATUS_ROMBUSY 0x0200
-#define BCSR_STATUS_USBOTGID 0x0800
-#define BCSR_STATUS_U0RXD 0x1000
-#define BCSR_STATUS_U1RXD 0x2000
-#define BCSR_STATUS_U3RXD 0x8000
-
-#define BCSR_SWITCHES_OCTAL 0x00FF
-#define BCSR_SWITCHES_DIP_1 0x0080
-#define BCSR_SWITCHES_DIP_2 0x0040
-#define BCSR_SWITCHES_DIP_3 0x0020
-#define BCSR_SWITCHES_DIP_4 0x0010
-#define BCSR_SWITCHES_DIP_5 0x0008
-#define BCSR_SWITCHES_DIP_6 0x0004
-#define BCSR_SWITCHES_DIP_7 0x0002
-#define BCSR_SWITCHES_DIP_8 0x0001
-#define BCSR_SWITCHES_ROTARY 0x0F00
-
-#define BCSR_RESETS_PHY0 0x0001
-#define BCSR_RESETS_PHY1 0x0002
-#define BCSR_RESETS_DC 0x0004
-#define BCSR_RESETS_WSC 0x2000
-#define BCSR_RESETS_SPISEL 0x4000
-#define BCSR_RESETS_DMAREQ 0x8000
-
-#define BCSR_PCMCIA_PC0VPP 0x0003
-#define BCSR_PCMCIA_PC0VCC 0x000C
-#define BCSR_PCMCIA_PC0DRVEN 0x0010
-#define BCSR_PCMCIA_PC0RST 0x0080
-#define BCSR_PCMCIA_PC1VPP 0x0300
-#define BCSR_PCMCIA_PC1VCC 0x0C00
-#define BCSR_PCMCIA_PC1DRVEN 0x1000
-#define BCSR_PCMCIA_PC1RST 0x8000
-
-#define BCSR_PCI_M66EN 0x0001
-#define BCSR_PCI_M33 0x0100
-#define BCSR_PCI_EXTERNARB 0x0200
-#define BCSR_PCI_GPIO200RST 0x0400
-#define BCSR_PCI_CLKOUT 0x0800
-#define BCSR_PCI_CFGHOST 0x1000
-
-#define BCSR_LEDS_DECIMALS 0x00FF
-#define BCSR_LEDS_LED0 0x0100
-#define BCSR_LEDS_LED1 0x0200
-#define BCSR_LEDS_LED2 0x0400
-#define BCSR_LEDS_LED3 0x0800
-
-#define BCSR_SYSTEM_VDDI 0x001F
-#define BCSR_SYSTEM_POWEROFF 0x4000
-#define BCSR_SYSTEM_RESET 0x8000
-
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
- ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
#define PB1550_BOTH_BANKS
#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER)
#define PNX833X_GPIO_15_INT (PNX833X_GPIO_IRQ_BASE + 15)
#endif
-
* channel 3. */
#define irq_mpeg_d (ibase+0) /* MPEG Decoder Interrupt */
#endif /* _ASM_MACH_POWERTV_INTERRUPTS_H_ */
-
#define PL_64M 26
#define PL_256M 28
+/*
+ * PageGrain bits
+ */
+#define PG_RIE (_ULCAST_(1) << 31)
+#define PG_XIE (_ULCAST_(1) << 30)
+#define PG_ELPA (_ULCAST_(1) << 29)
+#define PG_ESP (_ULCAST_(1) << 28)
+
/*
* R4x00 interrupt enable / cause bits
*/
#define MIPS_CONF3_DSP (_ULCAST_(1) << 10)
#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13)
+#define MIPS_CONF4_MMUSIZEEXT (_ULCAST_(255) << 0)
+#define MIPS_CONF4_MMUEXTDEF (_ULCAST_(3) << 14)
+#define MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT (_ULCAST_(1) << 14)
+
#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
#define MIPS_CONF7_RPS (_ULCAST_(1) << 2)
#define read_c0_pagemask() __read_32bit_c0_register($5, 0)
#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val)
+#define read_c0_pagegrain() __read_32bit_c0_register($5, 1)
+#define write_c0_pagegrain(val) __write_32bit_c0_register($5, 1, val)
+
#define read_c0_wired() __read_32bit_c0_register($6, 0)
#define write_c0_wired(val) __write_32bit_c0_register($6, 0, val)
extern void ll_msc_irq(void);
#endif /* __ASM_MIPS_BOARDS_MSC01_IC_H */
-
extern void nile4_dump_irq_status(void); /* Debug */
#endif
-
return !cvmx_fuse_read(90);
case OCTEON_FEATURE_PCIE:
+ case OCTEON_FEATURE_MGMT_PORT:
+ case OCTEON_FEATURE_RAID:
return OCTEON_IS_MODEL(OCTEON_CN56XX)
|| OCTEON_IS_MODEL(OCTEON_CN52XX);
case OCTEON_FEATURE_TRA:
return !(OCTEON_IS_MODEL(OCTEON_CN30XX)
|| OCTEON_IS_MODEL(OCTEON_CN50XX));
- case OCTEON_FEATURE_MGMT_PORT:
- return OCTEON_IS_MODEL(OCTEON_CN56XX)
- || OCTEON_IS_MODEL(OCTEON_CN52XX);
- case OCTEON_FEATURE_RAID:
- return OCTEON_IS_MODEL(OCTEON_CN56XX)
- || OCTEON_IS_MODEL(OCTEON_CN52XX);
case OCTEON_FEATURE_USB:
return !(OCTEON_IS_MODEL(OCTEON_CN38XX)
|| OCTEON_IS_MODEL(OCTEON_CN58XX));
int dma_engine; /* -1 for no DMA */
};
+struct octeon_i2c_data {
+ unsigned int sys_freq;
+ unsigned int i2c_freq;
+};
+
extern void octeon_write_lcd(const char *s);
extern void octeon_check_cpu_bist(void);
extern int octeon_get_boot_debug_flag(void);
#endif
typedef struct page *pgtable_t;
-/*
- * For 3-level pagetables we defines these ourselves, for 2-level the
- * definitions are supplied by <asm-generic/pgtable-nopmd.h>.
- */
-#ifdef CONFIG_64BIT
-
-typedef struct { unsigned long pmd; } pmd_t;
-#define pmd_val(x) ((x).pmd)
-#define __pmd(x) ((pmd_t) { (x) } )
-
-#endif
-
/*
* Right now we don't support 4-level pagetables, so all pud-related
* definitions come from <asm-generic/pgtable-nopud.h>.
#ifndef _ASM_PARAM_H
#define _ASM_PARAM_H
-#ifdef __KERNEL__
-
-# define HZ CONFIG_HZ /* Internal kernel timer frequency */
-# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
#define EXEC_PAGESIZE 65536
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
+#include <asm-generic/param.h>
#endif /* _ASM_PARAM_H */
-/*
- * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * This file should only be included by drivers/parport/parport_pc.c.
- */
-#ifndef _ASM_PARPORT_H
-#define _ASM_PARPORT_H
-
-static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
-{
- return parport_pc_find_isa_ports(autoirq, autodma);
-}
-
-#endif /* _ASM_PARPORT_H */
+#include <asm-generic/parport.h>
*/
extern void pmd_init(unsigned long page, unsigned long pagetable);
-#ifdef CONFIG_64BIT
+#ifndef __PAGETABLE_PMD_FOLDED
static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
{
tlb_remove_page((tlb), pte); \
} while (0)
-#ifdef CONFIG_64BIT
+#ifndef __PAGETABLE_PMD_FOLDED
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
{
#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
#else
-#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT))
-#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pte_pfn(x) ((unsigned long)((x).pte >> _PFN_SHIFT))
+#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << _PFN_SHIFT) | pgprot_val(prot))
#endif
#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
#include <asm/cachectl.h>
#include <asm/fixmap.h>
+#ifdef CONFIG_PAGE_SIZE_64KB
+#include <asm-generic/pgtable-nopmd.h>
+#else
#include <asm-generic/pgtable-nopud.h>
+#endif
/*
* Each address space has 2 4K pages as its page directory, giving 1024
* fault address - VMALLOC_START.
*/
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#ifdef __PAGETABLE_PMD_FOLDED
+#define PGDIR_SHIFT (PAGE_SHIFT + PAGE_SHIFT + PTE_ORDER - 3)
+#else
+
/* PMD_SHIFT determines the size of the area a second-level page table can map */
#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT + PTE_ORDER - 3))
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
+
#define PGDIR_SHIFT (PMD_SHIFT + (PAGE_SHIFT + PMD_ORDER - 3))
+#endif
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
#ifdef CONFIG_PAGE_SIZE_64KB
#define PGD_ORDER 0
#define PUD_ORDER aieeee_attempt_to_allocate_pud
-#define PMD_ORDER 0
+#define PMD_ORDER aieeee_attempt_to_allocate_pmd
#define PTE_ORDER 0
#endif
#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
+#ifndef __PAGETABLE_PMD_FOLDED
#define PTRS_PER_PMD ((PAGE_SIZE << PMD_ORDER) / sizeof(pmd_t))
+#endif
#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
#if PGDIR_SIZE >= TASK_SIZE
#define pte_ERROR(e) \
printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+#ifndef __PAGETABLE_PMD_FOLDED
#define pmd_ERROR(e) \
printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#endif
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
extern pte_t invalid_pte_table[PTRS_PER_PTE];
extern pte_t empty_bad_page_table[PTRS_PER_PTE];
+
+
+#ifndef __PAGETABLE_PMD_FOLDED
+/*
+ * For 3-level pagetables we defines these ourselves, for 2-level the
+ * definitions are supplied by <asm-generic/pgtable-nopmd.h>.
+ */
+typedef struct { unsigned long pmd; } pmd_t;
+#define pmd_val(x) ((x).pmd)
+#define __pmd(x) ((pmd_t) { (x) } )
+
+
extern pmd_t invalid_pmd_table[PTRS_PER_PMD];
extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD];
+#endif
/*
* Empty pgd/pmd entries point to the invalid_pte_table.
{
pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
}
+#ifndef __PAGETABLE_PMD_FOLDED
/*
* Empty pud entries point to the invalid_pmd_table.
{
pud_val(*pudp) = ((unsigned long) invalid_pmd_table);
}
+#endif
#define pte_page(x) pfn_to_page(pte_pfn(x))
#define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
#else
-#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT))
-#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pte_pfn(x) ((unsigned long)((x).pte >> _PFN_SHIFT))
+#define pfn_pte(pfn, prot) __pte(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
#endif
#define __pgd_offset(address) pgd_index(address)
/* to find an entry in a page-table-directory */
#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr))
+#ifndef __PAGETABLE_PMD_FOLDED
static inline unsigned long pud_page_vaddr(pud_t pud)
{
return pud_val(pud);
{
return (pmd_t *) pud_page_vaddr(*pud) + pmd_index(address);
}
+#endif
/* Find an entry in the third-level page table.. */
#define __pte_offset(address) \
#define _CACHE_SHIFT 3
#define _CACHE_MASK (7<<3)
-#else
+#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
#define _PAGE_PRESENT (1<<0) /* implemented in software */
#define _PAGE_READ (1<<1) /* implemented in software */
#define _PAGE_MODIFIED (1<<4) /* implemented in software */
#define _PAGE_FILE (1<<4) /* set:pagecache unset:swap */
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
-
#define _PAGE_GLOBAL (1<<8)
#define _PAGE_VALID (1<<9)
#define _PAGE_SILENT_READ (1<<9) /* synonym */
#define _CACHE_UNCACHED (1<<11)
#define _CACHE_MASK (1<<11)
+#else /* 'Normal' r4K case */
+/*
+ * When using the RI/XI bit support, we have 13 bits of flags below
+ * the physical address. The RI/XI bits are placed such that a SRL 5
+ * can strip off the software bits, then a ROTR 2 can move the RI/XI
+ * into bits [63:62]. This also limits physical address to 56 bits,
+ * which is more than we need right now.
+ */
+
+/* implemented in software */
+#define _PAGE_PRESENT_SHIFT (0)
+#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT)
+/* implemented in software, should be unused if kernel_uses_smartmips_rixi. */
+#define _PAGE_READ_SHIFT (kernel_uses_smartmips_rixi ? _PAGE_PRESENT_SHIFT : _PAGE_PRESENT_SHIFT + 1)
+#define _PAGE_READ ({if (kernel_uses_smartmips_rixi) BUG(); 1 << _PAGE_READ_SHIFT; })
+/* implemented in software */
+#define _PAGE_WRITE_SHIFT (_PAGE_READ_SHIFT + 1)
+#define _PAGE_WRITE (1 << _PAGE_WRITE_SHIFT)
+/* implemented in software */
+#define _PAGE_ACCESSED_SHIFT (_PAGE_WRITE_SHIFT + 1)
+#define _PAGE_ACCESSED (1 << _PAGE_ACCESSED_SHIFT)
+/* implemented in software */
+#define _PAGE_MODIFIED_SHIFT (_PAGE_ACCESSED_SHIFT + 1)
+#define _PAGE_MODIFIED (1 << _PAGE_MODIFIED_SHIFT)
+/* set:pagecache unset:swap */
+#define _PAGE_FILE (_PAGE_MODIFIED)
+
+#ifdef CONFIG_HUGETLB_PAGE
+/* huge tlb page */
+#define _PAGE_HUGE_SHIFT (_PAGE_MODIFIED_SHIFT + 1)
+#define _PAGE_HUGE (1 << _PAGE_HUGE_SHIFT)
#else
+#define _PAGE_HUGE_SHIFT (_PAGE_MODIFIED_SHIFT)
+#define _PAGE_HUGE ({BUG(); 1; }) /* Dummy value */
+#endif
-#define _PAGE_R4KBUG (1<<5) /* workaround for r4k bug */
-#define _PAGE_HUGE (1<<5) /* huge tlb page */
-#define _PAGE_GLOBAL (1<<6)
-#define _PAGE_VALID (1<<7)
-#define _PAGE_SILENT_READ (1<<7) /* synonym */
-#define _PAGE_DIRTY (1<<8) /* The MIPS dirty bit */
-#define _PAGE_SILENT_WRITE (1<<8)
-#define _CACHE_SHIFT 9
-#define _CACHE_MASK (7<<9)
+/* Page cannot be executed */
+#define _PAGE_NO_EXEC_SHIFT (kernel_uses_smartmips_rixi ? _PAGE_HUGE_SHIFT + 1 : _PAGE_HUGE_SHIFT)
+#define _PAGE_NO_EXEC ({if (!kernel_uses_smartmips_rixi) BUG(); 1 << _PAGE_NO_EXEC_SHIFT; })
+
+/* Page cannot be read */
+#define _PAGE_NO_READ_SHIFT (kernel_uses_smartmips_rixi ? _PAGE_NO_EXEC_SHIFT + 1 : _PAGE_NO_EXEC_SHIFT)
+#define _PAGE_NO_READ ({if (!kernel_uses_smartmips_rixi) BUG(); 1 << _PAGE_NO_READ_SHIFT; })
+
+#define _PAGE_GLOBAL_SHIFT (_PAGE_NO_READ_SHIFT + 1)
+#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT)
+
+#define _PAGE_VALID_SHIFT (_PAGE_GLOBAL_SHIFT + 1)
+#define _PAGE_VALID (1 << _PAGE_VALID_SHIFT)
+/* synonym */
+#define _PAGE_SILENT_READ (_PAGE_VALID)
+
+/* The MIPS dirty bit */
+#define _PAGE_DIRTY_SHIFT (_PAGE_VALID_SHIFT + 1)
+#define _PAGE_DIRTY (1 << _PAGE_DIRTY_SHIFT)
+#define _PAGE_SILENT_WRITE (_PAGE_DIRTY)
+
+#define _CACHE_SHIFT (_PAGE_DIRTY_SHIFT + 1)
+#define _CACHE_MASK (7 << _CACHE_SHIFT)
+
+#define _PFN_SHIFT (PAGE_SHIFT - 12 + _CACHE_SHIFT + 3)
-#endif
#endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */
+#ifndef _PFN_SHIFT
+#define _PFN_SHIFT PAGE_SHIFT
+#endif
+#define _PFN_MASK (~((1 << (_PFN_SHIFT)) - 1))
+
+#ifndef _PAGE_NO_READ
+#define _PAGE_NO_READ ({BUG(); 0; })
+#define _PAGE_NO_READ_SHIFT ({BUG(); 0; })
+#endif
+#ifndef _PAGE_NO_EXEC
+#define _PAGE_NO_EXEC ({BUG(); 0; })
+#endif
+#ifndef _PAGE_GLOBAL_SHIFT
+#define _PAGE_GLOBAL_SHIFT ilog2(_PAGE_GLOBAL)
+#endif
+
+
+#ifndef __ASSEMBLY__
+/*
+ * pte_to_entrylo converts a page table entry (PTE) into a Mips
+ * entrylo0/1 value.
+ */
+static inline uint64_t pte_to_entrylo(unsigned long pte_val)
+{
+ if (kernel_uses_smartmips_rixi) {
+ int sa;
+#ifdef CONFIG_32BIT
+ sa = 31 - _PAGE_NO_READ_SHIFT;
+#else
+ sa = 63 - _PAGE_NO_READ_SHIFT;
+#endif
+ /*
+ * C has no way to express that this is a DSRL
+ * _PAGE_NO_EXEC_SHIFT followed by a ROTR 2. Luckily
+ * in the fast path this is done in assembly
+ */
+ return (pte_val >> _PAGE_GLOBAL_SHIFT) |
+ ((pte_val & (_PAGE_NO_EXEC | _PAGE_NO_READ)) << sa);
+ }
+
+ return pte_val >> _PAGE_GLOBAL_SHIFT;
+}
+#endif
/*
* Cache attributes
#endif
-#define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED)
+#define __READABLE (_PAGE_SILENT_READ | _PAGE_ACCESSED | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ))
#define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
-#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
+#define _PAGE_CHG_MASK (_PFN_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK)
#endif /* _ASM_PGTABLE_BITS_H */
struct vm_area_struct;
#define PAGE_NONE __pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT)
-#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_WRITE | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ) | \
_page_cachable_default)
-#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_READ | \
- _page_cachable_default)
-#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_READ | \
+#define PAGE_COPY __pgprot(_PAGE_PRESENT | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ) | \
+ (kernel_uses_smartmips_rixi ? _PAGE_NO_EXEC : 0) | _page_cachable_default)
+#define PAGE_READONLY __pgprot(_PAGE_PRESENT | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ) | \
_page_cachable_default)
#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
_PAGE_GLOBAL | _page_cachable_default)
-#define PAGE_USERIO __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+#define PAGE_USERIO __pgprot(_PAGE_PRESENT | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ) | _PAGE_WRITE | \
_page_cachable_default)
#define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \
__WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED)
/*
- * MIPS can't do page protection for execute, and considers that the same like
- * read. Also, write permissions imply read permissions. This is the closest
- * we can get by reasonable means..
+ * If _PAGE_NO_EXEC is not defined, we can't do page protection for
+ * execute, and consider it to be the same as read. Also, write
+ * permissions imply read permissions. This is the closest we can get
+ * by reasonable means..
*/
/*
*/
#define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0)
-#ifdef CONFIG_64BIT
+#ifndef __PAGETABLE_PMD_FOLDED
/*
* (puds are folded into pgds so this doesn't get actually called,
* but the define is needed for a generic inline function.)
static inline pte_t pte_mkyoung(pte_t pte)
{
pte_val(pte) |= _PAGE_ACCESSED;
- if (pte_val(pte) & _PAGE_READ)
- pte_val(pte) |= _PAGE_SILENT_READ;
+ if (kernel_uses_smartmips_rixi) {
+ if (!(pte_val(pte) & _PAGE_NO_READ))
+ pte_val(pte) |= _PAGE_SILENT_READ;
+ } else {
+ if (pte_val(pte) & _PAGE_READ)
+ pte_val(pte) |= _PAGE_SILENT_READ;
+ }
return pte;
}
#define ZSP_DUET 'D' /* one DUET zsp engine */
#define ZSP_TRIAD 'T' /* two TRIAD zsp engines */
-extern char *prom_getcmdline(void);
extern char *prom_getenv(char *name);
extern void prom_init_cmdline(void);
extern void prom_meminit(void);
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Ralf Baechle
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- */
-#ifndef _ASM_SERIAL_H
-#define _ASM_SERIAL_H
-
-
-/*
- * This assumes you have a 1.8432 MHz clock for your UART.
- *
- * It'd be nice if someone built a serial card with a 24.576 MHz
- * clock, since the 16550A is capable of handling a top speed of 1.5
- * megabits/second; but this requires the faster clock.
- */
-#define BASE_BAUD (1843200 / 16)
-
-#endif /* _ASM_SERIAL_H */
+#include <asm-generic/serial.h>
extern void prom_putchar(char c);
extern char prom_getchar(void);
-/* Memory descriptor management. */
-#define PROM_MAX_PMEMBLOCKS 32
-struct prom_pmemblock {
- LONG base; /* Within KSEG0 or XKPHYS. */
- ULONG size; /* In bytes. */
- ULONG type; /* free or prom memory */
-};
-
/* Get next memory descriptor after CURR, returns first descriptor
* in chain is CURR is NULL.
*/
* array.
*/
extern void prom_meminit(void);
-extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
/* PROM device tree library routines. */
#define PROM_NULL_COMPONENT ((pcomponent *) 0)
/* Get child component of THIS. */
extern pcomponent *ArcGetChild(pcomponent *this);
-/* Get parent component of CHILD. */
-extern pcomponent *prom_getparent(pcomponent *child);
-
-/* Copy component opaque data of component THIS into BUFFER
- * if component THIS has opaque data. Returns success or
- * failure status.
- */
-extern long prom_getcdata(void *buffer, pcomponent *this);
-
-/* Other misc. component routines. */
-extern pcomponent *prom_childadd(pcomponent *this, pcomponent *tmp, void *data);
-extern long prom_delcomponent(pcomponent *this);
-extern pcomponent *prom_componentbypath(char *path);
-
/* This is called at prom_init time to identify the
* ARC architecture we are running on
*/
/* ARCS command line parsing. */
extern void prom_init_cmdline(void);
-/* Acquiring info about the current time, etc. */
-extern struct linux_tinfo *prom_gettinfo(void);
-extern unsigned long prom_getrtime(void);
-
/* File operations. */
-extern long prom_getvdirent(unsigned long fd, struct linux_vdirent *ent, unsigned long num, unsigned long *cnt);
-extern long prom_open(char *name, enum linux_omode md, unsigned long *fd);
-extern long prom_close(unsigned long fd);
extern LONG ArcRead(ULONG fd, PVOID buf, ULONG num, PULONG cnt);
-extern long prom_getrstatus(unsigned long fd);
extern LONG ArcWrite(ULONG fd, PVOID buf, ULONG num, PULONG cnt);
-extern long prom_seek(unsigned long fd, struct linux_bigint *off, enum linux_seekmode sm);
-extern long prom_mount(char *name, enum linux_mountops op);
-extern long prom_getfinfo(unsigned long fd, struct linux_finfo *buf);
-extern long prom_setfinfo(unsigned long fd, unsigned long flags, unsigned long msk);
-
-/* Running stand-along programs. */
-extern long prom_load(char *name, unsigned long end, unsigned long *pc, unsigned long *eaddr);
-extern long prom_invoke(unsigned long pc, unsigned long sp, long argc, char **argv, char **envp);
-extern long prom_exec(char *name, long argc, char **argv, char **envp);
/* Misc. routines. */
-extern VOID prom_halt(VOID) __attribute__((noreturn));
-extern VOID prom_powerdown(VOID) __attribute__((noreturn));
-extern VOID prom_restart(VOID) __attribute__((noreturn));
extern VOID ArcReboot(VOID) __attribute__((noreturn));
extern VOID ArcEnterInteractiveMode(VOID) __attribute__((noreturn));
-extern long prom_cfgsave(VOID);
-extern struct linux_sysid *prom_getsysid(VOID);
extern VOID ArcFlushAllCaches(VOID);
extern DISPLAY_STATUS *ArcGetDisplayStatus(ULONG FileID);
#endif
#endif /* __ASM_SIBYTE_BIGSUR_H */
-
#endif /* 1250 PASS2 || 112x PASS1 */
#endif
-
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_SN_KLKERNVARS_H */
-
#endif /* CONFIG_SPARSEMEM */
#endif /* _MIPS_SPARSEMEM_H */
-
static inline int arch_spin_is_locked(arch_spinlock_t *lock)
{
- unsigned int counters = ACCESS_ONCE(lock->lock);
+ u32 counters = ACCESS_ONCE(lock->lock);
- return ((counters >> 14) ^ counters) & 0x1fff;
+ return ((counters >> 16) ^ counters) & 0xffff;
}
#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
static inline int arch_spin_is_contended(arch_spinlock_t *lock)
{
- unsigned int counters = ACCESS_ONCE(lock->lock);
+ u32 counters = ACCESS_ONCE(lock->lock);
- return (((counters >> 14) - counters) & 0x1fff) > 1;
+ return (((counters >> 16) - counters) & 0xffff) > 1;
}
#define arch_spin_is_contended arch_spin_is_contended
{
int my_ticket;
int tmp;
+ int inc = 0x10000;
if (R10000_LLSC_WAR) {
__asm__ __volatile__ (
" .set noreorder \n"
" \n"
"1: ll %[ticket], %[ticket_ptr] \n"
- " addiu %[my_ticket], %[ticket], 0x4000 \n"
+ " addu %[my_ticket], %[ticket], %[inc] \n"
" sc %[my_ticket], %[ticket_ptr] \n"
" beqzl %[my_ticket], 1b \n"
" nop \n"
- " srl %[my_ticket], %[ticket], 14 \n"
- " andi %[my_ticket], %[my_ticket], 0x1fff \n"
- " andi %[ticket], %[ticket], 0x1fff \n"
+ " srl %[my_ticket], %[ticket], 16 \n"
+ " andi %[ticket], %[ticket], 0xffff \n"
+ " andi %[my_ticket], %[my_ticket], 0xffff \n"
" bne %[ticket], %[my_ticket], 4f \n"
" subu %[ticket], %[my_ticket], %[ticket] \n"
"2: \n"
" .subsection 2 \n"
- "4: andi %[ticket], %[ticket], 0x1fff \n"
+ "4: andi %[ticket], %[ticket], 0xffff \n"
" sll %[ticket], 5 \n"
" \n"
"6: bnez %[ticket], 6b \n"
" subu %[ticket], 1 \n"
" \n"
- " lw %[ticket], %[ticket_ptr] \n"
- " andi %[ticket], %[ticket], 0x1fff \n"
+ " lhu %[ticket], %[serving_now_ptr] \n"
" beq %[ticket], %[my_ticket], 2b \n"
" subu %[ticket], %[my_ticket], %[ticket] \n"
" b 4b \n"
" .previous \n"
" .set pop \n"
: [ticket_ptr] "+m" (lock->lock),
+ [serving_now_ptr] "+m" (lock->h.serving_now),
[ticket] "=&r" (tmp),
- [my_ticket] "=&r" (my_ticket));
+ [my_ticket] "=&r" (my_ticket)
+ : [inc] "r" (inc));
} else {
__asm__ __volatile__ (
" .set push # arch_spin_lock \n"
" .set noreorder \n"
" \n"
- " ll %[ticket], %[ticket_ptr] \n"
- "1: addiu %[my_ticket], %[ticket], 0x4000 \n"
+ "1: ll %[ticket], %[ticket_ptr] \n"
+ " addu %[my_ticket], %[ticket], %[inc] \n"
" sc %[my_ticket], %[ticket_ptr] \n"
- " beqz %[my_ticket], 3f \n"
- " nop \n"
- " srl %[my_ticket], %[ticket], 14 \n"
- " andi %[my_ticket], %[my_ticket], 0x1fff \n"
- " andi %[ticket], %[ticket], 0x1fff \n"
+ " beqz %[my_ticket], 1b \n"
+ " srl %[my_ticket], %[ticket], 16 \n"
+ " andi %[ticket], %[ticket], 0xffff \n"
+ " andi %[my_ticket], %[my_ticket], 0xffff \n"
" bne %[ticket], %[my_ticket], 4f \n"
" subu %[ticket], %[my_ticket], %[ticket] \n"
"2: \n"
" .subsection 2 \n"
- "3: b 1b \n"
- " ll %[ticket], %[ticket_ptr] \n"
- " \n"
"4: andi %[ticket], %[ticket], 0x1fff \n"
" sll %[ticket], 5 \n"
" \n"
"6: bnez %[ticket], 6b \n"
" subu %[ticket], 1 \n"
" \n"
- " lw %[ticket], %[ticket_ptr] \n"
- " andi %[ticket], %[ticket], 0x1fff \n"
+ " lhu %[ticket], %[serving_now_ptr] \n"
" beq %[ticket], %[my_ticket], 2b \n"
" subu %[ticket], %[my_ticket], %[ticket] \n"
" b 4b \n"
" .previous \n"
" .set pop \n"
: [ticket_ptr] "+m" (lock->lock),
+ [serving_now_ptr] "+m" (lock->h.serving_now),
[ticket] "=&r" (tmp),
- [my_ticket] "=&r" (my_ticket));
+ [my_ticket] "=&r" (my_ticket)
+ : [inc] "r" (inc));
}
smp_llsc_mb();
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
- int tmp;
-
- smp_llsc_mb();
-
- if (R10000_LLSC_WAR) {
- __asm__ __volatile__ (
- " # arch_spin_unlock \n"
- "1: ll %[ticket], %[ticket_ptr] \n"
- " addiu %[ticket], %[ticket], 1 \n"
- " ori %[ticket], %[ticket], 0x2000 \n"
- " xori %[ticket], %[ticket], 0x2000 \n"
- " sc %[ticket], %[ticket_ptr] \n"
- " beqzl %[ticket], 1b \n"
- : [ticket_ptr] "+m" (lock->lock),
- [ticket] "=&r" (tmp));
- } else {
- __asm__ __volatile__ (
- " .set push # arch_spin_unlock \n"
- " .set noreorder \n"
- " \n"
- " ll %[ticket], %[ticket_ptr] \n"
- "1: addiu %[ticket], %[ticket], 1 \n"
- " ori %[ticket], %[ticket], 0x2000 \n"
- " xori %[ticket], %[ticket], 0x2000 \n"
- " sc %[ticket], %[ticket_ptr] \n"
- " beqz %[ticket], 2f \n"
- " nop \n"
- " \n"
- " .subsection 2 \n"
- "2: b 1b \n"
- " ll %[ticket], %[ticket_ptr] \n"
- " .previous \n"
- " .set pop \n"
- : [ticket_ptr] "+m" (lock->lock),
- [ticket] "=&r" (tmp));
- }
+ unsigned int serving_now = lock->h.serving_now + 1;
+ wmb();
+ lock->h.serving_now = (u16)serving_now;
+ nudge_writes();
}
static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
{
int tmp, tmp2, tmp3;
+ int inc = 0x10000;
if (R10000_LLSC_WAR) {
__asm__ __volatile__ (
" .set noreorder \n"
" \n"
"1: ll %[ticket], %[ticket_ptr] \n"
- " srl %[my_ticket], %[ticket], 14 \n"
- " andi %[my_ticket], %[my_ticket], 0x1fff \n"
- " andi %[now_serving], %[ticket], 0x1fff \n"
+ " srl %[my_ticket], %[ticket], 16 \n"
+ " andi %[my_ticket], %[my_ticket], 0xffff \n"
+ " andi %[now_serving], %[ticket], 0xffff \n"
" bne %[my_ticket], %[now_serving], 3f \n"
- " addiu %[ticket], %[ticket], 0x4000 \n"
+ " addu %[ticket], %[ticket], %[inc] \n"
" sc %[ticket], %[ticket_ptr] \n"
" beqzl %[ticket], 1b \n"
" li %[ticket], 1 \n"
: [ticket_ptr] "+m" (lock->lock),
[ticket] "=&r" (tmp),
[my_ticket] "=&r" (tmp2),
- [now_serving] "=&r" (tmp3));
+ [now_serving] "=&r" (tmp3)
+ : [inc] "r" (inc));
} else {
__asm__ __volatile__ (
" .set push # arch_spin_trylock \n"
" .set noreorder \n"
" \n"
- " ll %[ticket], %[ticket_ptr] \n"
- "1: srl %[my_ticket], %[ticket], 14 \n"
- " andi %[my_ticket], %[my_ticket], 0x1fff \n"
- " andi %[now_serving], %[ticket], 0x1fff \n"
+ "1: ll %[ticket], %[ticket_ptr] \n"
+ " srl %[my_ticket], %[ticket], 16 \n"
+ " andi %[my_ticket], %[my_ticket], 0xffff \n"
+ " andi %[now_serving], %[ticket], 0xffff \n"
" bne %[my_ticket], %[now_serving], 3f \n"
- " addiu %[ticket], %[ticket], 0x4000 \n"
+ " addu %[ticket], %[ticket], %[inc] \n"
" sc %[ticket], %[ticket_ptr] \n"
- " beqz %[ticket], 4f \n"
+ " beqz %[ticket], 1b \n"
" li %[ticket], 1 \n"
"2: \n"
" .subsection 2 \n"
"3: b 2b \n"
" li %[ticket], 0 \n"
- "4: b 1b \n"
- " ll %[ticket], %[ticket_ptr] \n"
" .previous \n"
" .set pop \n"
: [ticket_ptr] "+m" (lock->lock),
[ticket] "=&r" (tmp),
[my_ticket] "=&r" (tmp2),
- [now_serving] "=&r" (tmp3));
+ [now_serving] "=&r" (tmp3)
+ : [inc] "r" (inc));
}
smp_llsc_mb();
{
unsigned int tmp;
- smp_llsc_mb();
+ smp_mb__before_llsc();
if (R10000_LLSC_WAR) {
__asm__ __volatile__(
# error "please don't include this file directly"
#endif
-typedef struct {
+#include <linux/types.h>
+
+#include <asm/byteorder.h>
+
+typedef union {
/*
- * bits 0..13: serving_now
- * bits 14 : junk data
- * bits 15..28: ticket
+ * bits 0..15 : serving_now
+ * bits 16..31 : ticket
*/
- unsigned int lock;
+ u32 lock;
+ struct {
+#ifdef __BIG_ENDIAN
+ u16 ticket;
+ u16 serving_now;
+#else
+ u16 serving_now;
+ u16 ticket;
+#endif
+ } h;
} arch_spinlock_t;
-#define __ARCH_SPIN_LOCK_UNLOCKED { 0 }
+#define __ARCH_SPIN_LOCK_UNLOCKED { .lock = 0 }
typedef struct {
volatile unsigned int lock;
{
__u32 retval;
+ smp_mb__before_llsc();
+
if (kernel_uses_llsc && R10000_LLSC_WAR) {
unsigned long dummy;
{
__u64 retval;
+ smp_mb__before_llsc();
+
if (kernel_uses_llsc && R10000_LLSC_WAR) {
unsigned long dummy;
};
extern struct txx9_board_vec *txx9_board_vec;
extern int (*txx9_irq_dispatch)(int pending);
-char *prom_getcmdline(void);
const char *prom_getenv(const char *name);
void txx9_wdt_init(unsigned long base);
void txx9_wdt_now(unsigned long base);
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004, 2005, 2006, 2008 Thiemo Seufer
+ * Copyright (C) 2005 Maciej W. Rozycki
+ * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
+ */
+
+#include <linux/types.h>
+
+#define Ip_u1u2u3(op) \
+void __cpuinit \
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
+
+#define Ip_u2u1u3(op) \
+void __cpuinit \
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
+
+#define Ip_u3u1u2(op) \
+void __cpuinit \
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
+
+#define Ip_u1u2s3(op) \
+void __cpuinit \
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
+
+#define Ip_u2s3u1(op) \
+void __cpuinit \
+uasm_i##op(u32 **buf, unsigned int a, signed int b, unsigned int c)
+
+#define Ip_u2u1s3(op) \
+void __cpuinit \
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
+
+#define Ip_u2u1msbu3(op) \
+void __cpuinit \
+uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c, \
+ unsigned int d)
+
+#define Ip_u1u2(op) \
+void __cpuinit uasm_i##op(u32 **buf, unsigned int a, unsigned int b)
+
+#define Ip_u1s2(op) \
+void __cpuinit uasm_i##op(u32 **buf, unsigned int a, signed int b)
+
+#define Ip_u1(op) void __cpuinit uasm_i##op(u32 **buf, unsigned int a)
+
+#define Ip_0(op) void __cpuinit uasm_i##op(u32 **buf)
+
+Ip_u2u1s3(_addiu);
+Ip_u3u1u2(_addu);
+Ip_u2u1u3(_andi);
+Ip_u3u1u2(_and);
+Ip_u1u2s3(_beq);
+Ip_u1u2s3(_beql);
+Ip_u1s2(_bgez);
+Ip_u1s2(_bgezl);
+Ip_u1s2(_bltz);
+Ip_u1s2(_bltzl);
+Ip_u1u2s3(_bne);
+Ip_u2s3u1(_cache);
+Ip_u1u2u3(_dmfc0);
+Ip_u1u2u3(_dmtc0);
+Ip_u2u1s3(_daddiu);
+Ip_u3u1u2(_daddu);
+Ip_u2u1u3(_dsll);
+Ip_u2u1u3(_dsll32);
+Ip_u2u1u3(_dsra);
+Ip_u2u1u3(_dsrl);
+Ip_u2u1u3(_dsrl32);
+Ip_u2u1u3(_drotr);
+Ip_u3u1u2(_dsubu);
+Ip_0(_eret);
+Ip_u1(_j);
+Ip_u1(_jal);
+Ip_u1(_jr);
+Ip_u2s3u1(_ld);
+Ip_u2s3u1(_ll);
+Ip_u2s3u1(_lld);
+Ip_u1s2(_lui);
+Ip_u2s3u1(_lw);
+Ip_u1u2u3(_mfc0);
+Ip_u1u2u3(_mtc0);
+Ip_u2u1u3(_ori);
+Ip_u2s3u1(_pref);
+Ip_0(_rfe);
+Ip_u2s3u1(_sc);
+Ip_u2s3u1(_scd);
+Ip_u2s3u1(_sd);
+Ip_u2u1u3(_sll);
+Ip_u2u1u3(_sra);
+Ip_u2u1u3(_srl);
+Ip_u2u1u3(_rotr);
+Ip_u3u1u2(_subu);
+Ip_u2s3u1(_sw);
+Ip_0(_tlbp);
+Ip_0(_tlbr);
+Ip_0(_tlbwi);
+Ip_0(_tlbwr);
+Ip_u3u1u2(_xor);
+Ip_u2u1u3(_xori);
+Ip_u2u1msbu3(_dins);
+
+/* Handle labels. */
+struct uasm_label {
+ u32 *addr;
+ int lab;
+};
+
+void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
+#ifdef CONFIG_64BIT
+int uasm_in_compat_space_p(long addr);
+#endif
+int uasm_rel_hi(long val);
+int uasm_rel_lo(long val);
+void UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr);
+void UASM_i_LA(u32 **buf, unsigned int rs, long addr);
+
+#define UASM_L_LA(lb) \
+static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
+{ \
+ uasm_build_label(lab, addr, label##lb); \
+}
+
+/* convenience macros for instructions */
+#ifdef CONFIG_64BIT
+# define UASM_i_LW(buf, rs, rt, off) uasm_i_ld(buf, rs, rt, off)
+# define UASM_i_SW(buf, rs, rt, off) uasm_i_sd(buf, rs, rt, off)
+# define UASM_i_SLL(buf, rs, rt, sh) uasm_i_dsll(buf, rs, rt, sh)
+# define UASM_i_SRA(buf, rs, rt, sh) uasm_i_dsra(buf, rs, rt, sh)
+# define UASM_i_SRL(buf, rs, rt, sh) uasm_i_dsrl(buf, rs, rt, sh)
+# define UASM_i_ROTR(buf, rs, rt, sh) uasm_i_drotr(buf, rs, rt, sh)
+# define UASM_i_MFC0(buf, rt, rd...) uasm_i_dmfc0(buf, rt, rd)
+# define UASM_i_MTC0(buf, rt, rd...) uasm_i_dmtc0(buf, rt, rd)
+# define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_daddiu(buf, rs, rt, val)
+# define UASM_i_ADDU(buf, rs, rt, rd) uasm_i_daddu(buf, rs, rt, rd)
+# define UASM_i_SUBU(buf, rs, rt, rd) uasm_i_dsubu(buf, rs, rt, rd)
+# define UASM_i_LL(buf, rs, rt, off) uasm_i_lld(buf, rs, rt, off)
+# define UASM_i_SC(buf, rs, rt, off) uasm_i_scd(buf, rs, rt, off)
+#else
+# define UASM_i_LW(buf, rs, rt, off) uasm_i_lw(buf, rs, rt, off)
+# define UASM_i_SW(buf, rs, rt, off) uasm_i_sw(buf, rs, rt, off)
+# define UASM_i_SLL(buf, rs, rt, sh) uasm_i_sll(buf, rs, rt, sh)
+# define UASM_i_SRA(buf, rs, rt, sh) uasm_i_sra(buf, rs, rt, sh)
+# define UASM_i_SRL(buf, rs, rt, sh) uasm_i_srl(buf, rs, rt, sh)
+# define UASM_i_ROTR(buf, rs, rt, sh) uasm_i_rotr(buf, rs, rt, sh)
+# define UASM_i_MFC0(buf, rt, rd...) uasm_i_mfc0(buf, rt, rd)
+# define UASM_i_MTC0(buf, rt, rd...) uasm_i_mtc0(buf, rt, rd)
+# define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_addiu(buf, rs, rt, val)
+# define UASM_i_ADDU(buf, rs, rt, rd) uasm_i_addu(buf, rs, rt, rd)
+# define UASM_i_SUBU(buf, rs, rt, rd) uasm_i_subu(buf, rs, rt, rd)
+# define UASM_i_LL(buf, rs, rt, off) uasm_i_ll(buf, rs, rt, off)
+# define UASM_i_SC(buf, rs, rt, off) uasm_i_sc(buf, rs, rt, off)
+#endif
+
+#define uasm_i_b(buf, off) uasm_i_beq(buf, 0, 0, off)
+#define uasm_i_beqz(buf, rs, off) uasm_i_beq(buf, rs, 0, off)
+#define uasm_i_beqzl(buf, rs, off) uasm_i_beql(buf, rs, 0, off)
+#define uasm_i_bnez(buf, rs, off) uasm_i_bne(buf, rs, 0, off)
+#define uasm_i_bnezl(buf, rs, off) uasm_i_bnel(buf, rs, 0, off)
+#define uasm_i_move(buf, a, b) UASM_i_ADDU(buf, a, 0, b)
+#define uasm_i_nop(buf) uasm_i_sll(buf, 0, 0, 0)
+#define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1)
+#define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
+
+/* Handle relocations. */
+struct uasm_reloc {
+ u32 *addr;
+ unsigned int type;
+ int lab;
+};
+
+/* This is zero so we can use zeroed label arrays. */
+#define UASM_LABEL_INVALID 0
+
+void uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid);
+void uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab);
+void uasm_move_relocs(struct uasm_reloc *rel, u32 *first, u32 *end, long off);
+void uasm_move_labels(struct uasm_label *lab, u32 *first, u32 *end, long off);
+void uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab,
+ u32 *first, u32 *end, u32 *target);
+int uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr);
+
+/* Convenience functions for labeled branches. */
+void uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_b(u32 **p, struct uasm_reloc **r, int lid);
+void uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bne(u32 **p, struct uasm_reloc **r, unsigned int reg1,
+ unsigned int reg2, int lid);
+void uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Low level exception handling
- *
- * Copyright (C) 1998, 1999 by Ralf Baechle
- */
-#ifndef _ASM_UCONTEXT_H
-#define _ASM_UCONTEXT_H
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* _ASM_UCONTEXT_H */
+#include <asm-generic/ucontext.h>
#include <asm/jazz.h>
#include <asm/pgtable.h>
-static DEFINE_SPINLOCK(r4030_lock);
+static DEFINE_RAW_SPINLOCK(r4030_lock);
static void enable_r4030_irq(unsigned int irq)
{
unsigned int mask = 1 << (irq - JAZZ_IRQ_START);
unsigned long flags;
- spin_lock_irqsave(&r4030_lock, flags);
+ raw_spin_lock_irqsave(&r4030_lock, flags);
mask |= r4030_read_reg16(JAZZ_IO_IRQ_ENABLE);
r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, mask);
- spin_unlock_irqrestore(&r4030_lock, flags);
+ raw_spin_unlock_irqrestore(&r4030_lock, flags);
}
void disable_r4030_irq(unsigned int irq)
unsigned int mask = ~(1 << (irq - JAZZ_IRQ_START));
unsigned long flags;
- spin_lock_irqsave(&r4030_lock, flags);
+ raw_spin_lock_irqsave(&r4030_lock, flags);
mask &= r4030_read_reg16(JAZZ_IO_IRQ_ENABLE);
r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, mask);
- spin_unlock_irqrestore(&r4030_lock, flags);
+ raw_spin_unlock_irqrestore(&r4030_lock, flags);
}
static struct irq_chip r4030_irq_type = {
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o
CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
DEFINE(_PTE_T_SIZE, sizeof(pte_t));
BLANK();
DEFINE(_PGD_T_LOG2, PGD_T_LOG2);
+#ifndef __PAGETABLE_PMD_FOLDED
DEFINE(_PMD_T_LOG2, PMD_T_LOG2);
+#endif
DEFINE(_PTE_T_LOG2, PTE_T_LOG2);
BLANK();
DEFINE(_PGD_ORDER, PGD_ORDER);
+#ifndef __PAGETABLE_PMD_FOLDED
DEFINE(_PMD_ORDER, PMD_ORDER);
+#endif
DEFINE(_PTE_ORDER, PTE_ORDER);
BLANK();
DEFINE(_PMD_SHIFT, PMD_SHIFT);
#include <asm/gt64120.h>
#include <asm/time.h>
-static DEFINE_SPINLOCK(gt641xx_timer_lock);
+static DEFINE_RAW_SPINLOCK(gt641xx_timer_lock);
static unsigned int gt641xx_base_clock;
void gt641xx_set_base_clock(unsigned int clock)
{
u32 ctrl;
- spin_lock(>641xx_timer_lock);
+ raw_spin_lock(>641xx_timer_lock);
ctrl = GT_READ(GT_TC_CONTROL_OFS);
ctrl &= ~(GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK);
GT_WRITE(GT_TC0_OFS, delta);
GT_WRITE(GT_TC_CONTROL_OFS, ctrl);
- spin_unlock(>641xx_timer_lock);
+ raw_spin_unlock(>641xx_timer_lock);
return 0;
}
{
u32 ctrl;
- spin_lock(>641xx_timer_lock);
+ raw_spin_lock(>641xx_timer_lock);
ctrl = GT_READ(GT_TC_CONTROL_OFS);
ctrl &= ~(GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK);
GT_WRITE(GT_TC_CONTROL_OFS, ctrl);
- spin_unlock(>641xx_timer_lock);
+ raw_spin_unlock(>641xx_timer_lock);
}
static void gt641xx_timer0_event_handler(struct clock_event_device *dev)
case CPU_BCM6348:
case CPU_BCM6358:
case CPU_CAVIUM_OCTEON:
+ case CPU_CAVIUM_OCTEON_PLUS:
cpu_wait = r4k_wait;
break;
return config3 & MIPS_CONF_M;
}
+static inline unsigned int decode_config4(struct cpuinfo_mips *c)
+{
+ unsigned int config4;
+
+ config4 = read_c0_config4();
+
+ if ((config4 & MIPS_CONF4_MMUEXTDEF) == MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT
+ && cpu_has_tlb)
+ c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40;
+
+ return config4 & MIPS_CONF_M;
+}
+
static void __cpuinit decode_configs(struct cpuinfo_mips *c)
{
int ok;
ok = decode_config2(c);
if (ok)
ok = decode_config3(c);
+ if (ok)
+ ok = decode_config4(c);
mips_probe_watch_registers(c);
}
__cpu_name[cpu] = "MIPS 4Kc";
break;
case PRID_IMP_4KEC:
- c->cputype = CPU_4KEC;
- __cpu_name[cpu] = "MIPS 4KEc";
- break;
case PRID_IMP_4KECR2:
c->cputype = CPU_4KEC;
__cpu_name[cpu] = "MIPS 4KEc";
case PRID_IMP_CAVIUM_CN38XX:
case PRID_IMP_CAVIUM_CN31XX:
case PRID_IMP_CAVIUM_CN30XX:
+ c->cputype = CPU_CAVIUM_OCTEON;
+ __cpu_name[cpu] = "Cavium Octeon";
+ goto platform;
case PRID_IMP_CAVIUM_CN58XX:
case PRID_IMP_CAVIUM_CN56XX:
case PRID_IMP_CAVIUM_CN50XX:
case PRID_IMP_CAVIUM_CN52XX:
- c->cputype = CPU_CAVIUM_OCTEON;
- __cpu_name[cpu] = "Cavium Octeon";
+ c->cputype = CPU_CAVIUM_OCTEON_PLUS;
+ __cpu_name[cpu] = "Cavium Octeon+";
+platform:
+ if (cpu == 0)
+ __elf_platform = "octeon";
break;
default:
printk(KERN_INFO "Unknown Octeon chip!\n");
}
const char *__cpu_name[NR_CPUS];
+const char *__elf_platform;
__cpuinit void cpu_probe(void)
{
*
* Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
* Copyright (C) 2009 DSLab, Lanzhou University, China
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
*
* Thanks goes to Steven Rostedt for writing the original x86 version.
*/
*/
static int i8259A_auto_eoi = -1;
-DEFINE_SPINLOCK(i8259A_lock);
+DEFINE_RAW_SPINLOCK(i8259A_lock);
static void disable_8259A_irq(unsigned int irq);
static void enable_8259A_irq(unsigned int irq);
static void mask_and_ack_8259A(unsigned int irq);
irq -= I8259A_IRQ_BASE;
mask = 1 << irq;
- spin_lock_irqsave(&i8259A_lock, flags);
+ raw_spin_lock_irqsave(&i8259A_lock, flags);
cached_irq_mask |= mask;
if (irq & 8)
outb(cached_slave_mask, PIC_SLAVE_IMR);
else
outb(cached_master_mask, PIC_MASTER_IMR);
- spin_unlock_irqrestore(&i8259A_lock, flags);
+ raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
static void enable_8259A_irq(unsigned int irq)
irq -= I8259A_IRQ_BASE;
mask = ~(1 << irq);
- spin_lock_irqsave(&i8259A_lock, flags);
+ raw_spin_lock_irqsave(&i8259A_lock, flags);
cached_irq_mask &= mask;
if (irq & 8)
outb(cached_slave_mask, PIC_SLAVE_IMR);
else
outb(cached_master_mask, PIC_MASTER_IMR);
- spin_unlock_irqrestore(&i8259A_lock, flags);
+ raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
int i8259A_irq_pending(unsigned int irq)
irq -= I8259A_IRQ_BASE;
mask = 1 << irq;
- spin_lock_irqsave(&i8259A_lock, flags);
+ raw_spin_lock_irqsave(&i8259A_lock, flags);
if (irq < 8)
ret = inb(PIC_MASTER_CMD) & mask;
else
ret = inb(PIC_SLAVE_CMD) & (mask >> 8);
- spin_unlock_irqrestore(&i8259A_lock, flags);
+ raw_spin_unlock_irqrestore(&i8259A_lock, flags);
return ret;
}
irq -= I8259A_IRQ_BASE;
irqmask = 1 << irq;
- spin_lock_irqsave(&i8259A_lock, flags);
+ raw_spin_lock_irqsave(&i8259A_lock, flags);
/*
* Lightweight spurious IRQ detection. We do not want
* to overdo spurious IRQ handling - it's usually a sign
outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */
}
smtc_im_ack_irq(irq);
- spin_unlock_irqrestore(&i8259A_lock, flags);
+ raw_spin_unlock_irqrestore(&i8259A_lock, flags);
return;
spurious_8259A_irq:
i8259A_auto_eoi = auto_eoi;
- spin_lock_irqsave(&i8259A_lock, flags);
+ raw_spin_lock_irqsave(&i8259A_lock, flags);
outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */
outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */
- spin_unlock_irqrestore(&i8259A_lock, flags);
+ raw_spin_unlock_irqrestore(&i8259A_lock, flags);
}
/*
#define GT641XX_IRQ_TO_BIT(irq) (1U << (irq - GT641XX_IRQ_BASE))
-static DEFINE_SPINLOCK(gt641xx_irq_lock);
+static DEFINE_RAW_SPINLOCK(gt641xx_irq_lock);
static void ack_gt641xx_irq(unsigned int irq)
{
unsigned long flags;
u32 cause;
- spin_lock_irqsave(>641xx_irq_lock, flags);
+ raw_spin_lock_irqsave(>641xx_irq_lock, flags);
cause = GT_READ(GT_INTRCAUSE_OFS);
cause &= ~GT641XX_IRQ_TO_BIT(irq);
GT_WRITE(GT_INTRCAUSE_OFS, cause);
- spin_unlock_irqrestore(>641xx_irq_lock, flags);
+ raw_spin_unlock_irqrestore(>641xx_irq_lock, flags);
}
static void mask_gt641xx_irq(unsigned int irq)
unsigned long flags;
u32 mask;
- spin_lock_irqsave(>641xx_irq_lock, flags);
+ raw_spin_lock_irqsave(>641xx_irq_lock, flags);
mask = GT_READ(GT_INTRMASK_OFS);
mask &= ~GT641XX_IRQ_TO_BIT(irq);
GT_WRITE(GT_INTRMASK_OFS, mask);
- spin_unlock_irqrestore(>641xx_irq_lock, flags);
+ raw_spin_unlock_irqrestore(>641xx_irq_lock, flags);
}
static void mask_ack_gt641xx_irq(unsigned int irq)
unsigned long flags;
u32 cause, mask;
- spin_lock_irqsave(>641xx_irq_lock, flags);
+ raw_spin_lock_irqsave(>641xx_irq_lock, flags);
mask = GT_READ(GT_INTRMASK_OFS);
mask &= ~GT641XX_IRQ_TO_BIT(irq);
GT_WRITE(GT_INTRMASK_OFS, mask);
cause = GT_READ(GT_INTRCAUSE_OFS);
cause &= ~GT641XX_IRQ_TO_BIT(irq);
GT_WRITE(GT_INTRCAUSE_OFS, cause);
- spin_unlock_irqrestore(>641xx_irq_lock, flags);
+ raw_spin_unlock_irqrestore(>641xx_irq_lock, flags);
}
static void unmask_gt641xx_irq(unsigned int irq)
unsigned long flags;
u32 mask;
- spin_lock_irqsave(>641xx_irq_lock, flags);
+ raw_spin_lock_irqsave(>641xx_irq_lock, flags);
mask = GT_READ(GT_INTRMASK_OFS);
mask |= GT641XX_IRQ_TO_BIT(irq);
GT_WRITE(GT_INTRMASK_OFS, mask);
- spin_unlock_irqrestore(>641xx_irq_lock, flags);
+ raw_spin_unlock_irqrestore(>641xx_irq_lock, flags);
}
static struct irq_chip gt641xx_irq_chip = {
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/file.h>
-#include <linux/smp_lock.h>
#include <linux/highuid.h>
#include <linux/resource.h>
#include <linux/highmem.h>
* more details.
*
* Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
*/
#include <asm/regdef.h>
nop
END(octeon_mult_restore)
.set pop
-
#include <linux/vmalloc.h>
#include <linux/elf.h>
#include <linux/seq_file.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/moduleloader.h>
#include <linux/interrupt.h>
--- /dev/null
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/hrtimer.h>
+#include <linux/fs.h>
+#include <linux/debugfs.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+
+static int ss_get(void *data, u64 *val)
+{
+ ktime_t start, finish;
+ int loops;
+ int cont;
+ DEFINE_RAW_SPINLOCK(ss_spin);
+
+ loops = 1000000;
+ cont = 1;
+
+ start = ktime_get();
+
+ while (cont) {
+ raw_spin_lock(&ss_spin);
+ loops--;
+ if (loops == 0)
+ cont = 0;
+ raw_spin_unlock(&ss_spin);
+ }
+
+ finish = ktime_get();
+
+ *val = ktime_us_delta(finish, start);
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_ss, ss_get, NULL, "%llu\n");
+
+
+
+struct spin_multi_state {
+ raw_spinlock_t lock;
+ atomic_t start_wait;
+ atomic_t enter_wait;
+ atomic_t exit_wait;
+ int loops;
+};
+
+struct spin_multi_per_thread {
+ struct spin_multi_state *state;
+ ktime_t start;
+};
+
+static int multi_other(void *data)
+{
+ int loops;
+ int cont;
+ struct spin_multi_per_thread *pt = data;
+ struct spin_multi_state *s = pt->state;
+
+ loops = s->loops;
+ cont = 1;
+
+ atomic_dec(&s->enter_wait);
+
+ while (atomic_read(&s->enter_wait))
+ ; /* spin */
+
+ pt->start = ktime_get();
+
+ atomic_dec(&s->start_wait);
+
+ while (atomic_read(&s->start_wait))
+ ; /* spin */
+
+ while (cont) {
+ raw_spin_lock(&s->lock);
+ loops--;
+ if (loops == 0)
+ cont = 0;
+ raw_spin_unlock(&s->lock);
+ }
+
+ atomic_dec(&s->exit_wait);
+ while (atomic_read(&s->exit_wait))
+ ; /* spin */
+ return 0;
+}
+
+static int multi_get(void *data, u64 *val)
+{
+ ktime_t finish;
+ struct spin_multi_state ms;
+ struct spin_multi_per_thread t1, t2;
+
+ ms.lock = __RAW_SPIN_LOCK_UNLOCKED("multi_get");
+ ms.loops = 1000000;
+
+ atomic_set(&ms.start_wait, 2);
+ atomic_set(&ms.enter_wait, 2);
+ atomic_set(&ms.exit_wait, 2);
+ t1.state = &ms;
+ t2.state = &ms;
+
+ kthread_run(multi_other, &t2, "multi_get");
+
+ multi_other(&t1);
+
+ finish = ktime_get();
+
+ *val = ktime_us_delta(finish, t1.start);
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_multi, multi_get, NULL, "%llu\n");
+
+
+extern struct dentry *mips_debugfs_dir;
+static int __init spinlock_test(void)
+{
+ struct dentry *d;
+
+ if (!mips_debugfs_dir)
+ return -ENODEV;
+
+ d = debugfs_create_file("spin_single", S_IRUGO,
+ mips_debugfs_dir, NULL,
+ &fops_ss);
+ if (!d)
+ return -ENOMEM;
+
+ d = debugfs_create_file("spin_multi", S_IRUGO,
+ mips_debugfs_dir, NULL,
+ &fops_multi);
+ if (!d)
+ return -ENOMEM;
+
+ return 0;
+}
+device_initcall(spinlock_test);
#include <asm/types.h>
#include <asm/stacktrace.h>
#include <asm/irq.h>
+#include <asm/uasm.h>
extern void check_wait(void);
extern asmlinkage void r4k_wait(void);
unsigned long exception_handlers[32];
unsigned long vi_handlers[64];
-/*
- * As a side effect of the way this is implemented we're limited
- * to interrupt handlers in the address range from
- * KSEG0 <= x < KSEG0 + 256mb on the Nevada. Oh well ...
- */
-void *set_except_vector(int n, void *addr)
+void __init *set_except_vector(int n, void *addr)
{
unsigned long handler = (unsigned long) addr;
unsigned long old_handler = exception_handlers[n];
exception_handlers[n] = handler;
if (n == 0 && cpu_has_divec) {
- *(u32 *)(ebase + 0x200) = 0x08000000 |
- (0x03ffffff & (handler >> 2));
- local_flush_icache_range(ebase + 0x200, ebase + 0x204);
+ unsigned long jump_mask = ~((1 << 28) - 1);
+ u32 *buf = (u32 *)(ebase + 0x200);
+ unsigned int k0 = 26;
+ if ((handler & jump_mask) == ((ebase + 0x200) & jump_mask)) {
+ uasm_i_j(&buf, handler & ~jump_mask);
+ uasm_i_nop(&buf);
+ } else {
+ UASM_i_LA(&buf, k0, handler);
+ uasm_i_jr(&buf, k0);
+ uasm_i_nop(&buf);
+ }
+ local_flush_icache_range(ebase + 0x200, (unsigned long)buf);
}
return (void *)old_handler;
}
#include <linux/vmalloc.h>
#include <linux/elf.h>
#include <linux/seq_file.h>
-#include <linux/smp_lock.h>
#include <linux/syscalls.h>
#include <linux/moduleloader.h>
#include <linux/interrupt.h>
void pvc_clear(void);
void pvc_home(void);
-
* Author: Fuxin Zhang, zhangfx@lemote.com
*
* Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#include <loongson.h>
-int prom_argc;
-/* pmon passes arguments in 32bit pointers */
-int *_prom_argv;
-
void __init prom_init_cmdline(void)
{
+ int prom_argc;
+ /* pmon passes arguments in 32bit pointers */
+ int *_prom_argv;
int i;
long l;
* Author : jlliu, liujl@lemote.com
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Author : jlliu, liujl@lemote.com
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Author : jlliu, liujl@lemote.com
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Author : jlliu, liujl@lemote.com
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Author: Yanhua, yanh@lemote.com
*
* Copyright (C) 2009 Lemote Inc.
- * Author: Wu zhangjin, wuzj@lemote.com
+ * Author: Wu zhangjin, wuzhangjin@gmail.com
*
* Reference: AMD Geode(TM) CS5536 Companion Device Data Book
*
* Author : jlliu, liujl@lemote.com
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Author : jlliu, liujl@lemote.com
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
*
* Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
* Copyright (c) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
* Author: Fuxin Zhang, zhangfx@lemote.com
*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#include <loongson.h>
-unsigned long bus_clock, cpu_clock_freq;
+unsigned long cpu_clock_freq;
EXPORT_SYMBOL(cpu_clock_freq);
unsigned long memsize, highmemsize;
-/* pmon passes arguments in 32bit pointers */
-int *_prom_envp;
-
#define parse_even_earlier(res, option, p) \
do { \
if (strncmp(option, (char *)p, strlen(option)) == 0) \
void __init prom_init_env(void)
{
+ /* pmon passes arguments in 32bit pointers */
+ int *_prom_envp;
+ unsigned long bus_clock;
+ unsigned int processor_id;
long l;
/* firmware arguments are initialized in head.S */
}
if (memsize == 0)
memsize = 256;
+ if (bus_clock == 0)
+ bus_clock = 66000000;
+ if (cpu_clock_freq == 0) {
+ processor_id = (¤t_cpu_data)->processor_id;
+ switch (processor_id & PRID_REV_MASK) {
+ case PRID_REV_LOONGSON2E:
+ cpu_clock_freq = 533080000;
+ break;
+ case PRID_REV_LOONGSON2F:
+ cpu_clock_freq = 797000000;
+ break;
+ default:
+ cpu_clock_freq = 100000000;
+ break;
+ }
+ }
pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n",
bus_clock, cpu_clock_freq, memsize, highmemsize);
/*
* Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
/*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org>
*
return system_types[mips_machtype];
}
+void __weak __init mach_prom_init_machtype(void)
+{
+}
+
void __init prom_init_machtype(void)
{
char *p, str[MACHTYPE_LEN];
mips_machtype = LOONGSON_MACHTYPE;
p = strstr(arcs_cmdline, "machtype=");
- if (!p)
+ if (!p) {
+ mach_prom_init_machtype();
return;
+ }
p += strlen("machtype=");
strncpy(str, p, MACHTYPE_LEN);
p = strstr(str, " ");
void __init prom_init_memory(void)
{
- add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+ add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+
+ add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
+ 20), BOOT_MEM_RESERVED);
- add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
- 20), BOOT_MEM_RESERVED);
#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
{
int bit;
/*
* Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* loongson-specific suspend support
*
* Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
*
* Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
* Author: Fuxin Zhang, zhangfx@lemote.com
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
- * Author: Zhangjin Wu, wuzj@lemote.com
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Zhangjin Wu, wuzhangjin@gmail.com
*/
#include <linux/init.h>
#include <linux/pm.h>
((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
}
-static void loongson_halt(void)
+static void loongson_poweroff(void)
{
mach_prepare_shutdown();
- while (1)
- ;
+ unreachable();
+}
+
+static void loongson_halt(void)
+{
+ pr_notice("\n\n** You can safely turn off the power now **\n\n");
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
}
static int __init mips_reboot_setup(void)
{
_machine_restart = loongson_restart;
_machine_halt = loongson_halt;
- pm_power_off = loongson_halt;
+ pm_power_off = loongson_poweroff;
return 0;
}
*
* Copyright (C) 2009 Lemote, Inc.
* Author: Yan hua (yanhua@lemote.com)
- * Author: Wu Zhangjin (wuzj@lemote.com)
+ * Author: Wu Zhangjin (wuzhangjin@gmail.com)
*/
#include <linux/io.h>
* Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
* Author: Fuxin Zhang, zhangfx@lemote.com
*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
/*
* Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
/* Board-specific reboot/shutdown routines
* Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
# Makefile for lemote loongson2f family machines
#
-obj-y += irq.o reset.o ec_kb3310b.o
+obj-y += machtype.o irq.o reset.o ec_kb3310b.o
#
# Suspend Support
udelay(EC_REG_DELAY);
}
+ spin_unlock_irqrestore(&port_access_lock, flags);
+
if (timeout <= 0) {
printk(KERN_ERR "%s: deadable error : timeout...\n", __func__);
ret = -EINVAL;
"(%x/%d)ec issued command %d status : 0x%x\n",
timeout, EC_CMD_TIMEOUT - timeout, cmd, status);
- spin_unlock_irqrestore(&port_access_lock, flags);
-
return ret;
}
EXPORT_SYMBOL_GPL(ec_query_seq);
irq = -1;
if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) {
- spin_lock(&i8259A_lock);
+ raw_spin_lock(&i8259A_lock);
isr = inb(PIC_MASTER_CMD) &
~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR);
if (!isr)
if (~inb(PIC_MASTER_ISR) & 0x80)
irq = -1;
}
- spin_unlock(&i8259A_lock);
+ raw_spin_unlock(&i8259A_lock);
}
return irq;
--- /dev/null
+/*
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+void __init mach_prom_init_machtype(void)
+{
+ /* We share the same kernel image file among Lemote 2F family
+ * of machines, and provide the machtype= kernel command line
+ * to users to indicate their machine, this command line will
+ * be passed by the latest PMON automatically. and fortunately,
+ * up to now, we can get the machine type from the PMON_VER=
+ * commandline directly except the NAS machine, In the old
+ * machines, this will help the users a lot.
+ *
+ * If no "machtype=" passed, get machine type from "PMON_VER=".
+ * PMON_VER=LM8089 Lemote 8.9'' netbook
+ * LM8101 Lemote 10.1'' netbook
+ * (The above two netbooks have the same kernel support)
+ * LM6XXX Lemote FuLoong(2F) box series
+ * LM9XXX Lemote LynLoong PC series
+ */
+ if (strstr(arcs_cmdline, "PMON_VER=LM")) {
+ if (strstr(arcs_cmdline, "PMON_VER=LM8"))
+ mips_machtype = MACH_LEMOTE_YL2F89;
+ else if (strstr(arcs_cmdline, "PMON_VER=LM6"))
+ mips_machtype = MACH_LEMOTE_FL2F;
+ else if (strstr(arcs_cmdline, "PMON_VER=LM9"))
+ mips_machtype = MACH_LEMOTE_LL2F;
+ else
+ mips_machtype = MACH_LEMOTE_NAS;
+
+ strcat(arcs_cmdline, " machtype=");
+ strcat(arcs_cmdline, get_system_type());
+ strcat(arcs_cmdline, " ");
+ }
+}
* Lemote loongson2f family machines' specific suspend support
*
* Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
*
* Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
printk("\n");
return x;
}
-
switch(ieee754_csr.rm) {
case IEEE754_RN:
- return ieee754dp_zero(sn);
case IEEE754_RZ:
return ieee754dp_zero(sn);
case IEEE754_RU: /* toward +Infinity */
switch(ieee754_csr.rm) {
case IEEE754_RN:
- return ieee754sp_zero(sn);
case IEEE754_RZ:
return ieee754sp_zero(sn);
case IEEE754_RU: /* toward +Infinity */
printk(KERN_DEBUG "floating point exception in \"%s\", type=%s\n",
xcp->op, rtnames[xcp->rt]);
}
-
switch (c->cputype) {
case CPU_CAVIUM_OCTEON:
+ case CPU_CAVIUM_OCTEON_PLUS:
config1 = read_c0_config1();
c->icache.linesz = 2 << ((config1 >> 19) & 7);
c->icache.sets = 64 << ((config1 >> 22) & 7);
c->icache.sets * c->icache.ways * c->icache.linesz;
c->icache.waybit = ffs(icache_size / c->icache.ways) - 1;
c->dcache.linesz = 128;
- if (OCTEON_IS_MODEL(OCTEON_CN3XXX))
- c->dcache.sets = 1; /* CN3XXX has one Dcache set */
- else
+ if (c->cputype == CPU_CAVIUM_OCTEON_PLUS)
c->dcache.sets = 2; /* CN5XXX has two Dcache sets */
+ else
+ c->dcache.sets = 1; /* CN3XXX has one Dcache set */
c->dcache.ways = 64;
dcache_size =
c->dcache.sets * c->dcache.ways * c->dcache.linesz;
{
cache_parity_error_octeon(1);
}
-
static inline void setup_protection_map(void)
{
- protection_map[0] = PAGE_NONE;
- protection_map[1] = PAGE_READONLY;
- protection_map[2] = PAGE_COPY;
- protection_map[3] = PAGE_COPY;
- protection_map[4] = PAGE_READONLY;
- protection_map[5] = PAGE_READONLY;
- protection_map[6] = PAGE_COPY;
- protection_map[7] = PAGE_COPY;
- protection_map[8] = PAGE_NONE;
- protection_map[9] = PAGE_READONLY;
- protection_map[10] = PAGE_SHARED;
- protection_map[11] = PAGE_SHARED;
- protection_map[12] = PAGE_READONLY;
- protection_map[13] = PAGE_READONLY;
- protection_map[14] = PAGE_SHARED;
- protection_map[15] = PAGE_SHARED;
+ if (kernel_uses_smartmips_rixi) {
+ protection_map[0] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_NO_READ);
+ protection_map[1] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC);
+ protection_map[2] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_NO_READ);
+ protection_map[3] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC);
+ protection_map[4] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_READ);
+ protection_map[5] = __pgprot(_page_cachable_default | _PAGE_PRESENT);
+ protection_map[6] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_READ);
+ protection_map[7] = __pgprot(_page_cachable_default | _PAGE_PRESENT);
+
+ protection_map[8] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_NO_READ);
+ protection_map[9] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC);
+ protection_map[10] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_WRITE | _PAGE_NO_READ);
+ protection_map[11] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_WRITE);
+ protection_map[12] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_READ);
+ protection_map[13] = __pgprot(_page_cachable_default | _PAGE_PRESENT);
+ protection_map[14] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_WRITE | _PAGE_NO_READ);
+ protection_map[15] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_WRITE);
+
+ } else {
+ protection_map[0] = PAGE_NONE;
+ protection_map[1] = PAGE_READONLY;
+ protection_map[2] = PAGE_COPY;
+ protection_map[3] = PAGE_COPY;
+ protection_map[4] = PAGE_READONLY;
+ protection_map[5] = PAGE_READONLY;
+ protection_map[6] = PAGE_COPY;
+ protection_map[7] = PAGE_COPY;
+ protection_map[8] = PAGE_NONE;
+ protection_map[9] = PAGE_READONLY;
+ protection_map[10] = PAGE_SHARED;
+ protection_map[11] = PAGE_SHARED;
+ protection_map[12] = PAGE_READONLY;
+ protection_map[13] = PAGE_READONLY;
+ protection_map[14] = PAGE_SHARED;
+ protection_map[15] = PAGE_SHARED;
+ }
}
void __cpuinit cpu_cache_init(void)
if (!(vma->vm_flags & VM_WRITE))
goto bad_area;
} else {
- if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
- goto bad_area;
+ if (kernel_uses_smartmips_rixi) {
+ if (address == regs->cp0_epc && !(vma->vm_flags & VM_EXEC)) {
+#if 0
+ pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] XI violation\n",
+ raw_smp_processor_id(),
+ current->comm, current->pid,
+ field, address, write,
+ field, regs->cp0_epc);
+#endif
+ goto bad_area;
+ }
+ if (!(vma->vm_flags & VM_READ)) {
+#if 0
+ pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] RI violation\n",
+ raw_smp_processor_id(),
+ current->comm, current->pid,
+ field, address, write,
+ field, regs->cp0_epc);
+#endif
+ goto bad_area;
+ }
+ } else {
+ if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
+ goto bad_area;
+ }
}
/*
page += ((address & ~HPAGE_MASK) >> PAGE_SHIFT);
return page;
}
-
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
entrylo = pte.pte_high;
#else
- entrylo = pte_val(pte) >> 6;
+ entrylo = pte_to_entrylo(pte_val(pte));
#endif
ENTER_CRITICAL(flags);
* will officially be retired.
*/
pgd_t swapper_pg_dir[_PTRS_PER_PGD] __page_aligned(_PGD_ORDER);
-#ifdef CONFIG_64BIT
+#ifndef __PAGETABLE_PMD_FOLDED
pmd_t invalid_pmd_table[PTRS_PER_PMD] __page_aligned(PMD_ORDER);
#endif
pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned(PTE_ORDER);
#include <asm/sibyte/sb1250_dma.h>
#endif
-#include "uasm.h"
+#include <asm/uasm.h>
/* Registers used in the assembled routines. */
#define ZERO 0
void pgd_init(unsigned long page)
{
unsigned long *p, *end;
+ unsigned long entry;
+
+#ifdef __PAGETABLE_PMD_FOLDED
+ entry = (unsigned long)invalid_pte_table;
+#else
+ entry = (unsigned long)invalid_pmd_table;
+#endif
p = (unsigned long *) page;
end = p + PTRS_PER_PGD;
while (p < end) {
- p[0] = (unsigned long) invalid_pmd_table;
- p[1] = (unsigned long) invalid_pmd_table;
- p[2] = (unsigned long) invalid_pmd_table;
- p[3] = (unsigned long) invalid_pmd_table;
- p[4] = (unsigned long) invalid_pmd_table;
- p[5] = (unsigned long) invalid_pmd_table;
- p[6] = (unsigned long) invalid_pmd_table;
- p[7] = (unsigned long) invalid_pmd_table;
+ p[0] = entry;
+ p[1] = entry;
+ p[2] = entry;
+ p[3] = entry;
+ p[4] = entry;
+ p[5] = entry;
+ p[6] = entry;
+ p[7] = entry;
p += 8;
}
}
+#ifndef __PAGETABLE_PMD_FOLDED
void pmd_init(unsigned long addr, unsigned long pagetable)
{
unsigned long *p, *end;
end = p + PTRS_PER_PMD;
while (p < end) {
- p[0] = (unsigned long)pagetable;
- p[1] = (unsigned long)pagetable;
- p[2] = (unsigned long)pagetable;
- p[3] = (unsigned long)pagetable;
- p[4] = (unsigned long)pagetable;
- p[5] = (unsigned long)pagetable;
- p[6] = (unsigned long)pagetable;
- p[7] = (unsigned long)pagetable;
+ p[0] = pagetable;
+ p[1] = pagetable;
+ p[2] = pagetable;
+ p[3] = pagetable;
+ p[4] = pagetable;
+ p[5] = pagetable;
+ p[6] = pagetable;
+ p[7] = pagetable;
p += 8;
}
}
+#endif
void __init pagetable_init(void)
{
/* Initialize the entire pgd. */
pgd_init((unsigned long)swapper_pg_dir);
+#ifndef __PAGETABLE_PMD_FOLDED
pmd_init((unsigned long)invalid_pmd_table, (unsigned long)invalid_pte_table);
-
+#endif
pgd_base = swapper_pg_dir;
/*
* Fixed mappings:
unsigned long lo;
write_c0_pagemask(PM_HUGE_MASK);
ptep = (pte_t *)pmdp;
- lo = pte_val(*ptep) >> 6;
+ lo = pte_to_entrylo(pte_val(*ptep));
write_c0_entrylo0(lo);
write_c0_entrylo1(lo + (HPAGE_SIZE >> 7));
ptep++;
write_c0_entrylo1(ptep->pte_high);
#else
- write_c0_entrylo0(pte_val(*ptep++) >> 6);
- write_c0_entrylo1(pte_val(*ptep) >> 6);
+ write_c0_entrylo0(pte_to_entrylo(pte_val(*ptep++)));
+ write_c0_entrylo1(pte_to_entrylo(pte_val(*ptep)));
#endif
mtc0_tlbw_hazard();
if (idx < 0)
EXIT_CRITICAL(flags);
}
-#if 0
-static void r4k_update_mmu_cache_hwbug(struct vm_area_struct * vma,
- unsigned long address, pte_t pte)
-{
- unsigned long flags;
- unsigned int asid;
- pgd_t *pgdp;
- pmd_t *pmdp;
- pte_t *ptep;
- int idx;
-
- ENTER_CRITICAL(flags);
- address &= (PAGE_MASK << 1);
- asid = read_c0_entryhi() & ASID_MASK;
- write_c0_entryhi(address | asid);
- pgdp = pgd_offset(vma->vm_mm, address);
- mtc0_tlbw_hazard();
- tlb_probe();
- tlb_probe_hazard();
- pmdp = pmd_offset(pgdp, address);
- idx = read_c0_index();
- ptep = pte_offset_map(pmdp, address);
- write_c0_entrylo0(pte_val(*ptep++) >> 6);
- write_c0_entrylo1(pte_val(*ptep) >> 6);
- mtc0_tlbw_hazard();
- if (idx < 0)
- tlb_write_random();
- else
- tlb_write_indexed();
- tlbw_use_hazard();
- EXIT_CRITICAL(flags);
-}
-#endif
-
void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
unsigned long entryhi, unsigned long pagemask)
{
return ret;
}
-static void __cpuinit probe_tlb(unsigned long config)
-{
- struct cpuinfo_mips *c = ¤t_cpu_data;
- unsigned int reg;
-
- /*
- * If this isn't a MIPS32 / MIPS64 compliant CPU. Config 1 register
- * is not supported, we assume R4k style. Cpu probing already figured
- * out the number of tlb entries.
- */
- if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY)
- return;
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * If TLB is shared in SMTC system, total size already
- * has been calculated and written into cpu_data tlbsize
- */
- if((smtc_status & SMTC_TLB_SHARED) == SMTC_TLB_SHARED)
- return;
-#endif /* CONFIG_MIPS_MT_SMTC */
-
- reg = read_c0_config1();
- if (!((config >> 7) & 3))
- panic("No TLB present");
-
- c->tlbsize = ((reg >> 25) & 0x3f) + 1;
-}
-
static int __cpuinitdata ntlb;
static int __init set_ntlb(char *str)
{
void __cpuinit tlb_init(void)
{
- unsigned int config = read_c0_config();
-
/*
* You should never change this register:
* - On R4600 1.7 the tlbp never hits for pages smaller than
* - The entire mm handling assumes the c0_pagemask register to
* be set to fixed-size pages.
*/
- probe_tlb(config);
write_c0_pagemask(PM_DEFAULT_MASK);
write_c0_wired(0);
if (current_cpu_type() == CPU_R10000 ||
current_cpu_type() == CPU_R12000 ||
current_cpu_type() == CPU_R14000)
write_c0_framemask(0);
+
+ if (kernel_uses_smartmips_rixi) {
+ /*
+ * Enable the no read, no exec bits, and enable large virtual
+ * address.
+ */
+ u32 pg = PG_RIE | PG_XIE;
+#ifdef CONFIG_64BIT
+ pg |= PG_ELPA;
+#endif
+ write_c0_pagegrain(pg);
+ }
+
temp_tlb_entry = current_cpu_data.tlbsize - 1;
/* From this point on the ARC firmware is dead. */
#include <asm/mmu_context.h>
#include <asm/war.h>
-
-#include "uasm.h"
+#include <asm/uasm.h>
static inline int r45k_bvahwbug(void)
{
label_vmalloc_done,
label_tlbw_hazard,
label_split,
+ label_tlbl_goaround1,
+ label_tlbl_goaround2,
label_nopage_tlbl,
label_nopage_tlbs,
label_nopage_tlbm,
UASM_L_LA(_vmalloc_done)
UASM_L_LA(_tlbw_hazard)
UASM_L_LA(_split)
+UASM_L_LA(_tlbl_goaround1)
+UASM_L_LA(_tlbl_goaround2)
UASM_L_LA(_nopage_tlbl)
UASM_L_LA(_nopage_tlbs)
UASM_L_LA(_nopage_tlbm)
}
}
-#ifdef CONFIG_HUGETLB_PAGE
-static __cpuinit void build_huge_tlb_write_entry(u32 **p,
- struct uasm_label **l,
- struct uasm_reloc **r,
- unsigned int tmp,
- enum tlb_write_entry wmode)
+static __cpuinit __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
+ unsigned int reg)
{
- /* Set huge page tlb entry size */
- uasm_i_lui(p, tmp, PM_HUGE_MASK >> 16);
- uasm_i_ori(p, tmp, tmp, PM_HUGE_MASK & 0xffff);
- uasm_i_mtc0(p, tmp, C0_PAGEMASK);
+ if (kernel_uses_smartmips_rixi) {
+ UASM_i_SRL(p, reg, reg, ilog2(_PAGE_NO_EXEC));
+ UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+ } else {
+#ifdef CONFIG_64BIT_PHYS_ADDR
+ uasm_i_dsrl(p, reg, reg, ilog2(_PAGE_GLOBAL));
+#else
+ UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL));
+#endif
+ }
+}
- build_tlb_write_entry(p, l, r, wmode);
+#ifdef CONFIG_HUGETLB_PAGE
+static __cpuinit void build_restore_pagemask(u32 **p,
+ struct uasm_reloc **r,
+ unsigned int tmp,
+ enum label_id lid)
+{
/* Reset default page size */
if (PM_DEFAULT_MASK >> 16) {
uasm_i_lui(p, tmp, PM_DEFAULT_MASK >> 16);
uasm_i_ori(p, tmp, tmp, PM_DEFAULT_MASK & 0xffff);
- uasm_il_b(p, r, label_leave);
+ uasm_il_b(p, r, lid);
uasm_i_mtc0(p, tmp, C0_PAGEMASK);
} else if (PM_DEFAULT_MASK) {
uasm_i_ori(p, tmp, 0, PM_DEFAULT_MASK);
- uasm_il_b(p, r, label_leave);
+ uasm_il_b(p, r, lid);
uasm_i_mtc0(p, tmp, C0_PAGEMASK);
} else {
- uasm_il_b(p, r, label_leave);
+ uasm_il_b(p, r, lid);
uasm_i_mtc0(p, 0, C0_PAGEMASK);
}
}
+static __cpuinit void build_huge_tlb_write_entry(u32 **p,
+ struct uasm_label **l,
+ struct uasm_reloc **r,
+ unsigned int tmp,
+ enum tlb_write_entry wmode)
+{
+ /* Set huge page tlb entry size */
+ uasm_i_lui(p, tmp, PM_HUGE_MASK >> 16);
+ uasm_i_ori(p, tmp, tmp, PM_HUGE_MASK & 0xffff);
+ uasm_i_mtc0(p, tmp, C0_PAGEMASK);
+
+ build_tlb_write_entry(p, l, r, wmode);
+
+ build_restore_pagemask(p, r, tmp, label_leave);
+}
+
/*
* Check if Huge PTE is present, if so then jump to LABEL.
*/
if (!small_sequence)
uasm_i_lui(p, tmp, HPAGE_SIZE >> (7 + 16));
- UASM_i_SRL(p, pte, pte, 6); /* convert to entrylo */
- uasm_i_mtc0(p, pte, C0_ENTRYLO0); /* load it */
+ build_convert_pte_to_entrylo(p, pte);
+ UASM_i_MTC0(p, pte, C0_ENTRYLO0); /* load it */
/* convert to entrylo1 */
if (small_sequence)
UASM_i_ADDIU(p, pte, pte, HPAGE_SIZE >> 7);
else
UASM_i_ADDU(p, pte, pte, tmp);
- uasm_i_mtc0(p, pte, C0_ENTRYLO1); /* load it */
+ UASM_i_MTC0(p, pte, C0_ENTRYLO1); /* load it */
}
static __cpuinit void build_huge_handler_tail(u32 **p,
uasm_i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3);
uasm_i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */
+#ifndef __PAGETABLE_PMD_FOLDED
uasm_i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */
uasm_i_ld(p, ptr, 0, ptr); /* get pmd pointer */
uasm_i_dsrl(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
uasm_i_andi(p, tmp, tmp, (PTRS_PER_PMD - 1)<<3);
uasm_i_daddu(p, ptr, ptr, tmp); /* add in pmd offset */
+#endif
}
/*
if (cpu_has_64bits) {
uasm_i_ld(p, tmp, 0, ptep); /* get even pte */
uasm_i_ld(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
- uasm_i_dsrl(p, tmp, tmp, 6); /* convert to entrylo0 */
- uasm_i_mtc0(p, tmp, C0_ENTRYLO0); /* load it */
- uasm_i_dsrl(p, ptep, ptep, 6); /* convert to entrylo1 */
- uasm_i_mtc0(p, ptep, C0_ENTRYLO1); /* load it */
+ if (kernel_uses_smartmips_rixi) {
+ UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_NO_EXEC));
+ UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_NO_EXEC));
+ UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+ UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
+ UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+ } else {
+ uasm_i_dsrl(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
+ UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
+ uasm_i_dsrl(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
+ }
+ UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
} else {
int pte_off_even = sizeof(pte_t) / 2;
int pte_off_odd = pte_off_even + sizeof(pte_t);
/* The pte entries are pre-shifted */
uasm_i_lw(p, tmp, pte_off_even, ptep); /* get even pte */
- uasm_i_mtc0(p, tmp, C0_ENTRYLO0); /* load it */
+ UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
uasm_i_lw(p, ptep, pte_off_odd, ptep); /* get odd pte */
- uasm_i_mtc0(p, ptep, C0_ENTRYLO1); /* load it */
+ UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
}
#else
UASM_i_LW(p, tmp, 0, ptep); /* get even pte */
UASM_i_LW(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
if (r45k_bvahwbug())
build_tlb_probe_entry(p);
- UASM_i_SRL(p, tmp, tmp, 6); /* convert to entrylo0 */
- if (r4k_250MHZhwbug())
- uasm_i_mtc0(p, 0, C0_ENTRYLO0);
- uasm_i_mtc0(p, tmp, C0_ENTRYLO0); /* load it */
- UASM_i_SRL(p, ptep, ptep, 6); /* convert to entrylo1 */
- if (r45k_bvahwbug())
- uasm_i_mfc0(p, tmp, C0_INDEX);
+ if (kernel_uses_smartmips_rixi) {
+ UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_NO_EXEC));
+ UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_NO_EXEC));
+ UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+ if (r4k_250MHZhwbug())
+ UASM_i_MTC0(p, 0, C0_ENTRYLO0);
+ UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
+ UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+ } else {
+ UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
+ if (r4k_250MHZhwbug())
+ UASM_i_MTC0(p, 0, C0_ENTRYLO0);
+ UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
+ UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
+ if (r45k_bvahwbug())
+ uasm_i_mfc0(p, tmp, C0_INDEX);
+ }
if (r4k_250MHZhwbug())
- uasm_i_mtc0(p, 0, C0_ENTRYLO1);
- uasm_i_mtc0(p, ptep, C0_ENTRYLO1); /* load it */
+ UASM_i_MTC0(p, 0, C0_ENTRYLO1);
+ UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
#endif
}
build_pte_present(u32 **p, struct uasm_reloc **r,
unsigned int pte, unsigned int ptr, enum label_id lid)
{
- uasm_i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
- uasm_i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
- uasm_il_bnez(p, r, pte, lid);
+ if (kernel_uses_smartmips_rixi) {
+ uasm_i_andi(p, pte, pte, _PAGE_PRESENT);
+ uasm_il_beqz(p, r, pte, lid);
+ } else {
+ uasm_i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
+ uasm_i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_READ);
+ uasm_il_bnez(p, r, pte, lid);
+ }
iPTE_LW(p, pte, ptr);
}
build_pte_present(&p, &r, K0, K1, label_nopage_tlbl);
if (m4kc_tlbp_war())
build_tlb_probe_entry(&p);
+
+ if (kernel_uses_smartmips_rixi) {
+ /*
+ * If the page is not _PAGE_VALID, RI or XI could not
+ * have triggered it. Skip the expensive test..
+ */
+ uasm_i_andi(&p, K0, K0, _PAGE_VALID);
+ uasm_il_beqz(&p, &r, K0, label_tlbl_goaround1);
+ uasm_i_nop(&p);
+
+ uasm_i_tlbr(&p);
+ /* Examine entrylo 0 or 1 based on ptr. */
+ uasm_i_andi(&p, K0, K1, sizeof(pte_t));
+ uasm_i_beqz(&p, K0, 8);
+
+ UASM_i_MFC0(&p, K0, C0_ENTRYLO0); /* load it in the delay slot*/
+ UASM_i_MFC0(&p, K0, C0_ENTRYLO1); /* load it if ptr is odd */
+ /*
+ * If the entryLo (now in K0) is valid (bit 1), RI or
+ * XI must have triggered it.
+ */
+ uasm_i_andi(&p, K0, K0, 2);
+ uasm_il_bnez(&p, &r, K0, label_nopage_tlbl);
+
+ uasm_l_tlbl_goaround1(&l, p);
+ /* Reload the PTE value */
+ iPTE_LW(&p, K0, K1);
+ }
build_make_valid(&p, &r, K0, K1);
build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1);
iPTE_LW(&p, K0, K1);
build_pte_present(&p, &r, K0, K1, label_nopage_tlbl);
build_tlb_probe_entry(&p);
+
+ if (kernel_uses_smartmips_rixi) {
+ /*
+ * If the page is not _PAGE_VALID, RI or XI could not
+ * have triggered it. Skip the expensive test..
+ */
+ uasm_i_andi(&p, K0, K0, _PAGE_VALID);
+ uasm_il_beqz(&p, &r, K0, label_tlbl_goaround2);
+ uasm_i_nop(&p);
+
+ uasm_i_tlbr(&p);
+ /* Examine entrylo 0 or 1 based on ptr. */
+ uasm_i_andi(&p, K0, K1, sizeof(pte_t));
+ uasm_i_beqz(&p, K0, 8);
+
+ UASM_i_MFC0(&p, K0, C0_ENTRYLO0); /* load it in the delay slot*/
+ UASM_i_MFC0(&p, K0, C0_ENTRYLO1); /* load it if ptr is odd */
+ /*
+ * If the entryLo (now in K0) is valid (bit 1), RI or
+ * XI must have triggered it.
+ */
+ uasm_i_andi(&p, K0, K0, 2);
+ uasm_il_beqz(&p, &r, K0, label_tlbl_goaround2);
+ /* Reload the PTE value */
+ iPTE_LW(&p, K0, K1);
+
+ /*
+ * We clobbered C0_PAGEMASK, restore it. On the other branch
+ * it is restored in build_huge_tlb_write_entry.
+ */
+ build_restore_pagemask(&p, &r, K0, label_nopage_tlbl);
+
+ uasm_l_tlbl_goaround2(&l, p);
+ }
uasm_i_ori(&p, K0, K0, (_PAGE_ACCESSED | _PAGE_VALID));
build_huge_handler_tail(&p, &r, &l, K0, K1);
#endif
#include <asm/inst.h>
#include <asm/elf.h>
#include <asm/bugs.h>
-
-#include "uasm.h"
+#include <asm/uasm.h>
enum fields {
RS = 0x001,
insn_dsrl32, insn_drotr, insn_dsubu, insn_eret, insn_j, insn_jal,
insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0,
insn_mtc0, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd,
- insn_sd, insn_sll, insn_sra, insn_srl, insn_subu, insn_sw,
- insn_tlbp, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori, insn_dins
+ insn_sd, insn_sll, insn_sra, insn_srl, insn_rotr, insn_subu, insn_sw,
+ insn_tlbp, insn_tlbr, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori,
+ insn_dins
};
struct insn {
{ insn_sll, M(spec_op, 0, 0, 0, 0, sll_op), RT | RD | RE },
{ insn_sra, M(spec_op, 0, 0, 0, 0, sra_op), RT | RD | RE },
{ insn_srl, M(spec_op, 0, 0, 0, 0, srl_op), RT | RD | RE },
+ { insn_rotr, M(spec_op, 1, 0, 0, 0, srl_op), RT | RD | RE },
{ insn_subu, M(spec_op, 0, 0, 0, 0, subu_op), RS | RT | RD },
{ insn_sw, M(sw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_tlbp, M(cop0_op, cop_op, 0, 0, 0, tlbp_op), 0 },
+ { insn_tlbr, M(cop0_op, cop_op, 0, 0, 0, tlbr_op), 0 },
{ insn_tlbwi, M(cop0_op, cop_op, 0, 0, 0, tlbwi_op), 0 },
{ insn_tlbwr, M(cop0_op, cop_op, 0, 0, 0, tlbwr_op), 0 },
{ insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD },
I_u2u1u3(_sll)
I_u2u1u3(_sra)
I_u2u1u3(_srl)
+I_u2u1u3(_rotr)
I_u3u1u2(_subu)
I_u2s3u1(_sw)
I_0(_tlbp)
+I_0(_tlbr)
I_0(_tlbwi)
I_0(_tlbwr)
I_u3u1u2(_xor)
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004, 2005, 2006, 2008 Thiemo Seufer
- * Copyright (C) 2005 Maciej W. Rozycki
- * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
- */
-
-#include <linux/types.h>
-
-#define Ip_u1u2u3(op) \
-void __cpuinit \
-uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
-
-#define Ip_u2u1u3(op) \
-void __cpuinit \
-uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
-
-#define Ip_u3u1u2(op) \
-void __cpuinit \
-uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
-
-#define Ip_u1u2s3(op) \
-void __cpuinit \
-uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
-
-#define Ip_u2s3u1(op) \
-void __cpuinit \
-uasm_i##op(u32 **buf, unsigned int a, signed int b, unsigned int c)
-
-#define Ip_u2u1s3(op) \
-void __cpuinit \
-uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
-
-#define Ip_u2u1msbu3(op) \
-void __cpuinit \
-uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c, \
- unsigned int d)
-
-#define Ip_u1u2(op) \
-void __cpuinit uasm_i##op(u32 **buf, unsigned int a, unsigned int b)
-
-#define Ip_u1s2(op) \
-void __cpuinit uasm_i##op(u32 **buf, unsigned int a, signed int b)
-
-#define Ip_u1(op) void __cpuinit uasm_i##op(u32 **buf, unsigned int a)
-
-#define Ip_0(op) void __cpuinit uasm_i##op(u32 **buf)
-
-Ip_u2u1s3(_addiu);
-Ip_u3u1u2(_addu);
-Ip_u2u1u3(_andi);
-Ip_u3u1u2(_and);
-Ip_u1u2s3(_beq);
-Ip_u1u2s3(_beql);
-Ip_u1s2(_bgez);
-Ip_u1s2(_bgezl);
-Ip_u1s2(_bltz);
-Ip_u1s2(_bltzl);
-Ip_u1u2s3(_bne);
-Ip_u2s3u1(_cache);
-Ip_u1u2u3(_dmfc0);
-Ip_u1u2u3(_dmtc0);
-Ip_u2u1s3(_daddiu);
-Ip_u3u1u2(_daddu);
-Ip_u2u1u3(_dsll);
-Ip_u2u1u3(_dsll32);
-Ip_u2u1u3(_dsra);
-Ip_u2u1u3(_dsrl);
-Ip_u2u1u3(_dsrl32);
-Ip_u2u1u3(_drotr);
-Ip_u3u1u2(_dsubu);
-Ip_0(_eret);
-Ip_u1(_j);
-Ip_u1(_jal);
-Ip_u1(_jr);
-Ip_u2s3u1(_ld);
-Ip_u2s3u1(_ll);
-Ip_u2s3u1(_lld);
-Ip_u1s2(_lui);
-Ip_u2s3u1(_lw);
-Ip_u1u2u3(_mfc0);
-Ip_u1u2u3(_mtc0);
-Ip_u2u1u3(_ori);
-Ip_u2s3u1(_pref);
-Ip_0(_rfe);
-Ip_u2s3u1(_sc);
-Ip_u2s3u1(_scd);
-Ip_u2s3u1(_sd);
-Ip_u2u1u3(_sll);
-Ip_u2u1u3(_sra);
-Ip_u2u1u3(_srl);
-Ip_u3u1u2(_subu);
-Ip_u2s3u1(_sw);
-Ip_0(_tlbp);
-Ip_0(_tlbwi);
-Ip_0(_tlbwr);
-Ip_u3u1u2(_xor);
-Ip_u2u1u3(_xori);
-Ip_u2u1msbu3(_dins);
-
-/* Handle labels. */
-struct uasm_label {
- u32 *addr;
- int lab;
-};
-
-void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
-#ifdef CONFIG_64BIT
-int uasm_in_compat_space_p(long addr);
-#endif
-int uasm_rel_hi(long val);
-int uasm_rel_lo(long val);
-void UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr);
-void UASM_i_LA(u32 **buf, unsigned int rs, long addr);
-
-#define UASM_L_LA(lb) \
-static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
-{ \
- uasm_build_label(lab, addr, label##lb); \
-}
-
-/* convenience macros for instructions */
-#ifdef CONFIG_64BIT
-# define UASM_i_LW(buf, rs, rt, off) uasm_i_ld(buf, rs, rt, off)
-# define UASM_i_SW(buf, rs, rt, off) uasm_i_sd(buf, rs, rt, off)
-# define UASM_i_SLL(buf, rs, rt, sh) uasm_i_dsll(buf, rs, rt, sh)
-# define UASM_i_SRA(buf, rs, rt, sh) uasm_i_dsra(buf, rs, rt, sh)
-# define UASM_i_SRL(buf, rs, rt, sh) uasm_i_dsrl(buf, rs, rt, sh)
-# define UASM_i_MFC0(buf, rt, rd...) uasm_i_dmfc0(buf, rt, rd)
-# define UASM_i_MTC0(buf, rt, rd...) uasm_i_dmtc0(buf, rt, rd)
-# define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_daddiu(buf, rs, rt, val)
-# define UASM_i_ADDU(buf, rs, rt, rd) uasm_i_daddu(buf, rs, rt, rd)
-# define UASM_i_SUBU(buf, rs, rt, rd) uasm_i_dsubu(buf, rs, rt, rd)
-# define UASM_i_LL(buf, rs, rt, off) uasm_i_lld(buf, rs, rt, off)
-# define UASM_i_SC(buf, rs, rt, off) uasm_i_scd(buf, rs, rt, off)
-#else
-# define UASM_i_LW(buf, rs, rt, off) uasm_i_lw(buf, rs, rt, off)
-# define UASM_i_SW(buf, rs, rt, off) uasm_i_sw(buf, rs, rt, off)
-# define UASM_i_SLL(buf, rs, rt, sh) uasm_i_sll(buf, rs, rt, sh)
-# define UASM_i_SRA(buf, rs, rt, sh) uasm_i_sra(buf, rs, rt, sh)
-# define UASM_i_SRL(buf, rs, rt, sh) uasm_i_srl(buf, rs, rt, sh)
-# define UASM_i_MFC0(buf, rt, rd...) uasm_i_mfc0(buf, rt, rd)
-# define UASM_i_MTC0(buf, rt, rd...) uasm_i_mtc0(buf, rt, rd)
-# define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_addiu(buf, rs, rt, val)
-# define UASM_i_ADDU(buf, rs, rt, rd) uasm_i_addu(buf, rs, rt, rd)
-# define UASM_i_SUBU(buf, rs, rt, rd) uasm_i_subu(buf, rs, rt, rd)
-# define UASM_i_LL(buf, rs, rt, off) uasm_i_ll(buf, rs, rt, off)
-# define UASM_i_SC(buf, rs, rt, off) uasm_i_sc(buf, rs, rt, off)
-#endif
-
-#define uasm_i_b(buf, off) uasm_i_beq(buf, 0, 0, off)
-#define uasm_i_beqz(buf, rs, off) uasm_i_beq(buf, rs, 0, off)
-#define uasm_i_beqzl(buf, rs, off) uasm_i_beql(buf, rs, 0, off)
-#define uasm_i_bnez(buf, rs, off) uasm_i_bne(buf, rs, 0, off)
-#define uasm_i_bnezl(buf, rs, off) uasm_i_bnel(buf, rs, 0, off)
-#define uasm_i_move(buf, a, b) UASM_i_ADDU(buf, a, 0, b)
-#define uasm_i_nop(buf) uasm_i_sll(buf, 0, 0, 0)
-#define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1)
-#define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
-
-/* Handle relocations. */
-struct uasm_reloc {
- u32 *addr;
- unsigned int type;
- int lab;
-};
-
-/* This is zero so we can use zeroed label arrays. */
-#define UASM_LABEL_INVALID 0
-
-void uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid);
-void uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab);
-void uasm_move_relocs(struct uasm_reloc *rel, u32 *first, u32 *end, long off);
-void uasm_move_labels(struct uasm_label *lab, u32 *first, u32 *end, long off);
-void uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab,
- u32 *first, u32 *end, u32 *target);
-int uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr);
-
-/* Convenience functions for labeled branches. */
-void uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_b(u32 **p, struct uasm_reloc **r, int lid);
-void uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_bne(u32 **p, struct uasm_reloc **r, unsigned int reg1,
- unsigned int reg2, int lid);
-void uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
static unsigned long _gcmp_base;
static unsigned int ipi_map[NR_CPUS];
-static DEFINE_SPINLOCK(mips_irq_lock);
+static DEFINE_RAW_SPINLOCK(mips_irq_lock);
static inline int mips_pcibios_iack(void)
{
{
unsigned long flags;
int irq;
- spin_lock_irqsave(&mips_irq_lock, flags);
+ raw_spin_lock_irqsave(&mips_irq_lock, flags);
irq = mips_pcibios_iack();
* on an SMP system, so leave it up to the generic code...
*/
- spin_unlock_irqrestore(&mips_irq_lock, flags);
+ raw_spin_unlock_irqrestore(&mips_irq_lock, flags);
return irq;
}
#define IRQFLAG_STARTED 1
#define IRQFLAG_DISABLED 2
-static DEFINE_SPINLOCK(pnx833x_irq_lock);
+static DEFINE_RAW_SPINLOCK(pnx833x_irq_lock);
static unsigned int pnx833x_startup_pic_irq(unsigned int irq)
{
unsigned long flags;
unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
- spin_lock_irqsave(&pnx833x_irq_lock, flags);
+ raw_spin_lock_irqsave(&pnx833x_irq_lock, flags);
irqflags[pic_irq] = IRQFLAG_STARTED; /* started, not disabled */
pnx833x_hard_enable_pic_irq(pic_irq);
- spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
+ raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
return 0;
}
unsigned long flags;
unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
- spin_lock_irqsave(&pnx833x_irq_lock, flags);
+ raw_spin_lock_irqsave(&pnx833x_irq_lock, flags);
irqflags[pic_irq] = 0; /* not started */
pnx833x_hard_disable_pic_irq(pic_irq);
- spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
+ raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
}
static void pnx833x_enable_pic_irq(unsigned int irq)
unsigned long flags;
unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
- spin_lock_irqsave(&pnx833x_irq_lock, flags);
+ raw_spin_lock_irqsave(&pnx833x_irq_lock, flags);
irqflags[pic_irq] &= ~IRQFLAG_DISABLED;
if (irqflags[pic_irq] == IRQFLAG_STARTED)
pnx833x_hard_enable_pic_irq(pic_irq);
- spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
+ raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
}
static void pnx833x_disable_pic_irq(unsigned int irq)
unsigned long flags;
unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
- spin_lock_irqsave(&pnx833x_irq_lock, flags);
+ raw_spin_lock_irqsave(&pnx833x_irq_lock, flags);
irqflags[pic_irq] |= IRQFLAG_DISABLED;
pnx833x_hard_disable_pic_irq(pic_irq);
- spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
+ raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
}
static void pnx833x_ack_pic_irq(unsigned int irq)
{
}
-static DEFINE_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock);
+static DEFINE_RAW_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock);
static unsigned int pnx833x_startup_gpio_irq(unsigned int irq)
{
int pin = irq - PNX833X_GPIO_IRQ_BASE;
unsigned long flags;
- spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
+ raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
pnx833x_gpio_enable_irq(pin);
- spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
+ raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
return 0;
}
{
int pin = irq - PNX833X_GPIO_IRQ_BASE;
unsigned long flags;
- spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
+ raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
pnx833x_gpio_enable_irq(pin);
- spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
+ raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
}
static void pnx833x_disable_gpio_irq(unsigned int irq)
{
int pin = irq - PNX833X_GPIO_IRQ_BASE;
unsigned long flags;
- spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
+ raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
pnx833x_gpio_disable_irq(pin);
- spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
+ raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
}
static void pnx833x_ack_gpio_irq(unsigned int irq)
{
int pin = irq - PNX833X_GPIO_IRQ_BASE;
unsigned long flags;
- spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
+ raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
pnx833x_gpio_clear_irq(pin);
- spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
+ raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
}
static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type)
mips_hpt_frequency *= 500000;
}
-
void __init prom_free_prom_memory(void)
{
}
-
-char * __init prom_getcmdline(void)
-{
- return arcs_cmdline;
-}
-
}
}
-EXPORT_SYMBOL(prom_getcmdline);
EXPORT_SYMBOL(get_ethernet_addr);
EXPORT_SYMBOL(str2eaddr);
* Copyright (C) 2004, 2005 Ralf Baechle
* Copyright (C) 2005 MIPS Technologies, Inc.
*/
+#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/oprofile.h>
#include "op_impl.h"
-extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak));
-extern struct op_mips_model op_model_rm9000_ops __attribute__((weak));
-extern struct op_mips_model op_model_loongson2_ops __attribute__((weak));
+extern struct op_mips_model op_model_mipsxx_ops __weak;
+extern struct op_mips_model op_model_rm9000_ops __weak;
+extern struct op_mips_model op_model_loongson2_ops __weak;
static struct op_mips_model *model;
*
* Copyright (C) 2009 Lemote Inc.
* Author: Yanhua <yanh@lemote.com>
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
int cnt1_enabled, cnt2_enabled;
} reg;
-DEFINE_SPINLOCK(sample_lock);
-
static char *oprofid = "LoongsonPerf";
static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
/* Compute all of the registers in preparation for enabling profiling. */
uint64_t counter, counter1, counter2;
struct pt_regs *regs = get_irq_regs();
int enabled;
- unsigned long flags;
/*
* LOONGSON2 defines two 32-bit performance counters.
counter1 = counter & 0xffffffff;
counter2 = counter >> 32;
- spin_lock_irqsave(&sample_lock, flags);
-
if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
if (reg.cnt1_enabled)
oprofile_add_sample(regs, 0);
counter2 = reg.reset_counter2;
}
- spin_unlock_irqrestore(&sample_lock, flags);
-
write_c0_perfcnt((counter2 << 32) | counter1);
return IRQ_HANDLED;
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111,
qube_raq_galileo_early_fixup);
+static void __devinit cobalt_legacy_ide_resource_fixup(struct pci_dev *dev,
+ struct resource *res)
+{
+ struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
+ unsigned long offset = hose->io_offset;
+ struct resource orig = *res;
+
+ if (!(res->flags & IORESOURCE_IO) ||
+ !(res->flags & IORESOURCE_PCI_FIXED))
+ return;
+
+ res->start -= offset;
+ res->end -= offset;
+ dev_printk(KERN_DEBUG, &dev->dev, "converted legacy %pR to bus %pR\n",
+ &orig, res);
+}
+
+static void __devinit cobalt_legacy_ide_fixup(struct pci_dev *dev)
+{
+ u32 class;
+ u8 progif;
+
+ /*
+ * If the IDE controller is in legacy mode, pci_setup_device() fills in
+ * the resources with the legacy addresses that normally appear on the
+ * PCI bus, just as if we had read them from a BAR.
+ *
+ * However, with the GT-64111, those legacy addresses, e.g., 0x1f0,
+ * will never appear on the PCI bus because it converts memory accesses
+ * in the PCI I/O region (which is never at address zero) into I/O port
+ * accesses with no address translation.
+ *
+ * For example, if GT_DEF_PCI0_IO_BASE is 0x10000000, a load or store
+ * to physical address 0x100001f0 will become a PCI access to I/O port
+ * 0x100001f0. There's no way to generate an access to I/O port 0x1f0,
+ * but the VT82C586 IDE controller does respond at 0x100001f0 because
+ * it only decodes the low 24 bits of the address.
+ *
+ * When this quirk runs, the pci_dev resources should contain bus
+ * addresses, not Linux I/O port numbers, so convert legacy addresses
+ * like 0x1f0 to bus addresses like 0x100001f0. Later, we'll convert
+ * them back with pcibios_fixup_bus() or pcibios_bus_to_resource().
+ */
+ class = dev->class >> 8;
+ if (class != PCI_CLASS_STORAGE_IDE)
+ return;
+
+ pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+ if ((progif & 1) == 0) {
+ cobalt_legacy_ide_resource_fixup(dev, &dev->resource[0]);
+ cobalt_legacy_ide_resource_fixup(dev, &dev->resource[1]);
+ }
+ if ((progif & 4) == 0) {
+ cobalt_legacy_ide_resource_fixup(dev, &dev->resource[2]);
+ cobalt_legacy_ide_resource_fixup(dev, &dev->resource[3]);
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
+ cobalt_legacy_ide_fixup);
+
static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev)
{
unsigned short cfgword;
/* Serial short detect enable */
_rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo);
- _wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo);
+ _wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 3), lo);
/* setting the USB2.0 micro frame length */
pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
/*
- * fuloong2e specific PCI support.
- *
* Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
* All rights reserved.
* Authors: Carsten Langgaard <carstenl@mips.com>
* Maciej W. Rozycki <macro@mips.com>
*
* Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
}
#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
-DEFINE_SPINLOCK(bpci_lock);
+static DEFINE_SPINLOCK(bpci_lock);
/*****************************************************************************
*
dev->irq = res;
return 0;
}
-
case CVMX_BOARD_TYPE_NAO38:
/* This is really the NAC38 */
return "AAAAADABAAAAAAAAAAAAAAAAAAAAAAAA";
- case CVMX_BOARD_TYPE_THUNDER:
- return "";
- case CVMX_BOARD_TYPE_EBH3000:
- return "";
case CVMX_BOARD_TYPE_EBH3100:
case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA";
case CVMX_BOARD_TYPE_BBGW_REF:
return "AABCD";
+ case CVMX_BOARD_TYPE_THUNDER:
+ case CVMX_BOARD_TYPE_EBH3000:
default:
return "";
}
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
if (!dev->resource[i].start)
continue;
- if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
- continue;
if (dev->resource[i].flags & IORESOURCE_IO)
offset = hose->io_offset;
else if (dev->resource[i].flags & IORESOURCE_MEM)
else
do_IRQ(ffs(pending) + intbase - 1);
}
-
}
/* PROM commandline functions */
-char *prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-EXPORT_SYMBOL(prom_getcmdline);
-
void __init prom_init_cmdline(void)
{
char *cp;
if (ack) {
do_idle();
- printk(KERN_ERR "Error reading the Atmel 24C32/24C64 EEPROM \n");
+ printk(KERN_ERR "Error reading the Atmel 24C32/24C64 EEPROM\n");
return -1;
}
const char rts = TIOCM_RTS;
const char dtr = TIOCM_DTR;
int fd;
-
#define LAUNCHSTACK_SIZE 256
-static __cpuinitdata DEFINE_SPINLOCK(launch_lock);
+static __cpuinitdata arch_spinlock_t launch_lock = __ARCH_SPIN_LOCK_UNLOCKED;
static unsigned long secondary_sp __cpuinitdata;
static unsigned long secondary_gp __cpuinitdata;
{
local_irq_disable();
- while (spin_is_locked(&launch_lock));
+ while (arch_spin_is_locked(&launch_lock));
__asm__ __volatile__(
" move $sp, %0 \n"
*/
void __init prom_grab_secondary(void)
{
- spin_lock(&launch_lock);
+ arch_spin_lock(&launch_lock);
pmon_cpustart(1, &prom_smp_bootstrap,
launchstack + LAUNCHSTACK_SIZE, 0);
secondary_sp = sp;
secondary_gp = gp;
- spin_unlock(&launch_lock);
+ arch_spin_unlock(&launch_lock);
}
/*
*
* Licensed under the GPLv2
*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2009 Lemote Inc.
* Author: Hu Hongbing <huhb@lemote.com>
- * Wu Zhangjin <wuzj@lemote.com>
+ * Wu Zhangjin <wuzhangjin@gmail.com>
*/
#include <asm/suspend.h>
#include <asm/fpu.h>
*
* Licensed under the GPLv2
*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Copyright (C) 2009 Lemote Inc.
* Author: Hu Hongbing <huhb@lemote.com>
- * Wu Zhangjin <wuzj@lemote.com>
+ * Wu Zhangjin <wuzhangjin@gmail.com>
*/
#include <asm/asm-offsets.h>
#include <asm/page.h>
switch (asic) {
case ASIC_ZEUS:
- fs_update(0x0000, 0x11, 0x02, 0);
- bcm1_usb2_ctl = 0x803;
- break;
-
case ASIC_CRONUS:
case ASIC_CRONUSLITE:
fs_update(0x0000, 0x11, 0x02, 0);
#include <asm/mach-powertv/asic_regs.h>
-static DEFINE_SPINLOCK(asic_irq_lock);
+static DEFINE_RAW_SPINLOCK(asic_irq_lock);
static inline int get_int(void)
{
unsigned long flags;
int irq;
- spin_lock_irqsave(&asic_irq_lock, flags);
+ raw_spin_lock_irqsave(&asic_irq_lock, flags);
irq = (asic_read(int_int_scan) >> 4) - 1;
if (irq == 0 || irq >= NR_IRQS)
irq = -1;
- spin_unlock_irqrestore(&asic_irq_lock, flags);
+ raw_spin_unlock_irqrestore(&asic_irq_lock, flags);
return irq;
}
#include <linux/etherdevice.h>
#include <linux/if_ether.h>
#include <linux/ctype.h>
-
#include <linux/cpu.h>
+#include <linux/time.h>
+
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/prom.h>
#include <asm/dma.h>
-#include <linux/time.h>
+#include <asm/asm.h>
#include <asm/traps.h>
#include <asm/asm-offsets.h>
#include "reset.h"
/*
* Macros for loading addresses and storing registers:
- * PTR_LA Load the address into a register
- * LONG_S Store the full width of the given register.
- * LONG_L Load the full width of the given register
- * PTR_ADDIU Add a constant value to a register used as a pointer
+ * LONG_L_ Stringified version of LONG_L for use in asm() statement
+ * LONG_S_ Stringified version of LONG_S for use in asm() statement
+ * PTR_LA_ Stringified version of PTR_LA for use in asm() statement
* REG_SIZE Number of 8-bit bytes in a full width register
*/
+#define LONG_L_ VAL(LONG_L) " "
+#define LONG_S_ VAL(LONG_S) " "
+#define PTR_LA_ VAL(PTR_LA) " "
+
#ifdef CONFIG_64BIT
#warning TODO: 64-bit code needs to be verified
-#define PTR_LA "dla "
-#define LONG_S "sd "
-#define LONG_L "ld "
-#define PTR_ADDIU "daddiu "
#define REG_SIZE "8" /* In bytes */
#endif
#ifdef CONFIG_32BIT
-#define PTR_LA "la "
-#define LONG_S "sw "
-#define LONG_L "lw "
-#define PTR_ADDIU "addiu "
#define REG_SIZE "4" /* In bytes */
#endif
* structure. */
__asm__ __volatile__ (
".set noat\n"
- LONG_S "$at, %[at]\n"
- LONG_S "$2, %[v0]\n"
- LONG_S "$3, %[v1]\n"
+ LONG_S_ "$at, %[at]\n"
+ LONG_S_ "$2, %[v0]\n"
+ LONG_S_ "$3, %[v1]\n"
:
[at] "=m" (at),
[v0] "=m" (v0),
"move $at, %[pt_regs]\n"
/* Argument registers */
- LONG_S "$4, " VAL(PT_R4) "($at)\n"
- LONG_S "$5, " VAL(PT_R5) "($at)\n"
- LONG_S "$6, " VAL(PT_R6) "($at)\n"
- LONG_S "$7, " VAL(PT_R7) "($at)\n"
+ LONG_S_ "$4, " VAL(PT_R4) "($at)\n"
+ LONG_S_ "$5, " VAL(PT_R5) "($at)\n"
+ LONG_S_ "$6, " VAL(PT_R6) "($at)\n"
+ LONG_S_ "$7, " VAL(PT_R7) "($at)\n"
/* Temporary regs */
- LONG_S "$8, " VAL(PT_R8) "($at)\n"
- LONG_S "$9, " VAL(PT_R9) "($at)\n"
- LONG_S "$10, " VAL(PT_R10) "($at)\n"
- LONG_S "$11, " VAL(PT_R11) "($at)\n"
- LONG_S "$12, " VAL(PT_R12) "($at)\n"
- LONG_S "$13, " VAL(PT_R13) "($at)\n"
- LONG_S "$14, " VAL(PT_R14) "($at)\n"
- LONG_S "$15, " VAL(PT_R15) "($at)\n"
+ LONG_S_ "$8, " VAL(PT_R8) "($at)\n"
+ LONG_S_ "$9, " VAL(PT_R9) "($at)\n"
+ LONG_S_ "$10, " VAL(PT_R10) "($at)\n"
+ LONG_S_ "$11, " VAL(PT_R11) "($at)\n"
+ LONG_S_ "$12, " VAL(PT_R12) "($at)\n"
+ LONG_S_ "$13, " VAL(PT_R13) "($at)\n"
+ LONG_S_ "$14, " VAL(PT_R14) "($at)\n"
+ LONG_S_ "$15, " VAL(PT_R15) "($at)\n"
/* "Saved" registers */
- LONG_S "$16, " VAL(PT_R16) "($at)\n"
- LONG_S "$17, " VAL(PT_R17) "($at)\n"
- LONG_S "$18, " VAL(PT_R18) "($at)\n"
- LONG_S "$19, " VAL(PT_R19) "($at)\n"
- LONG_S "$20, " VAL(PT_R20) "($at)\n"
- LONG_S "$21, " VAL(PT_R21) "($at)\n"
- LONG_S "$22, " VAL(PT_R22) "($at)\n"
- LONG_S "$23, " VAL(PT_R23) "($at)\n"
+ LONG_S_ "$16, " VAL(PT_R16) "($at)\n"
+ LONG_S_ "$17, " VAL(PT_R17) "($at)\n"
+ LONG_S_ "$18, " VAL(PT_R18) "($at)\n"
+ LONG_S_ "$19, " VAL(PT_R19) "($at)\n"
+ LONG_S_ "$20, " VAL(PT_R20) "($at)\n"
+ LONG_S_ "$21, " VAL(PT_R21) "($at)\n"
+ LONG_S_ "$22, " VAL(PT_R22) "($at)\n"
+ LONG_S_ "$23, " VAL(PT_R23) "($at)\n"
/* Add'l temp regs */
- LONG_S "$24, " VAL(PT_R24) "($at)\n"
- LONG_S "$25, " VAL(PT_R25) "($at)\n"
+ LONG_S_ "$24, " VAL(PT_R24) "($at)\n"
+ LONG_S_ "$25, " VAL(PT_R25) "($at)\n"
/* Kernel temp regs */
- LONG_S "$26, " VAL(PT_R26) "($at)\n"
- LONG_S "$27, " VAL(PT_R27) "($at)\n"
+ LONG_S_ "$26, " VAL(PT_R26) "($at)\n"
+ LONG_S_ "$27, " VAL(PT_R27) "($at)\n"
/* Global pointer, stack pointer, frame pointer and
* return address */
- LONG_S "$gp, " VAL(PT_R28) "($at)\n"
- LONG_S "$sp, " VAL(PT_R29) "($at)\n"
- LONG_S "$fp, " VAL(PT_R30) "($at)\n"
- LONG_S "$ra, " VAL(PT_R31) "($at)\n"
+ LONG_S_ "$gp, " VAL(PT_R28) "($at)\n"
+ LONG_S_ "$sp, " VAL(PT_R29) "($at)\n"
+ LONG_S_ "$fp, " VAL(PT_R30) "($at)\n"
+ LONG_S_ "$ra, " VAL(PT_R31) "($at)\n"
/* Now we can get the $at and v0 registers back and
* store them */
- LONG_L "$8, %[at]\n"
- LONG_S "$8, " VAL(PT_R1) "($at)\n"
- LONG_L "$8, %[v0]\n"
- LONG_S "$8, " VAL(PT_R2) "($at)\n"
- LONG_L "$8, %[v1]\n"
- LONG_S "$8, " VAL(PT_R3) "($at)\n"
+ LONG_L_ "$8, %[at]\n"
+ LONG_S_ "$8, " VAL(PT_R1) "($at)\n"
+ LONG_L_ "$8, %[v0]\n"
+ LONG_S_ "$8, " VAL(PT_R2) "($at)\n"
+ LONG_L_ "$8, %[v1]\n"
+ LONG_S_ "$8, " VAL(PT_R3) "($at)\n"
:
:
[at] "m" (at),
__asm__ __volatile__ (
".set noat\n"
"1:\n"
- PTR_LA "$at, 1b\n"
- LONG_S "$at, %[cp0_epc]\n"
+ PTR_LA_ "$at, 1b\n"
+ LONG_S_ "$at, %[cp0_epc]\n"
:
[cp0_epc] "=m" (my_regs.cp0_epc)
:
return (KDM_TO_PHYS(PAGE_ALIGN(SYMMON_STK_ADDR(nasid, 0))) >>
PAGE_SHIFT);
}
-
#endif
#define CNODEID_NONE (cnodeid_t)-1
-#define enter_panic_mode() spin_lock(&nmi_lock)
typedef unsigned long machreg_t;
-DEFINE_SPINLOCK(nmi_lock);
+static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED;
/*
* Lets see what else we need to do here. Set up sp, gp?
atomic_inc(&nmied_cpus);
#endif
/*
- * Use enter_panic_mode to allow only 1 cpu to proceed
+ * Only allow 1 cpu to proceed
*/
- enter_panic_mode();
+ arch_spin_lock(&nmi_lock);
#ifdef REAL_NMI_SIGNAL
/*
"level");
break;
- case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ:
- set_irq_chip_and_handler_name(irq,
- &crime_edge_interrupt, handle_edge_irq, "edge");
- break;
case CRIME_CPUERR_IRQ:
case CRIME_MEMERR_IRQ:
set_irq_chip_and_handler_name(irq,
"level");
break;
+ case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ:
case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ:
case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ:
- set_irq_chip_and_handler_name(irq,
- &crime_edge_interrupt, handle_edge_irq, "edge");
- break;
-
case CRIME_VICE_IRQ:
set_irq_chip_and_handler_name(irq,
&crime_edge_interrupt, handle_edge_irq, "edge");
/* Store the CPU id (not the logical number) */
int bcm1480_irq_owner[BCM1480_NR_IRQS];
-DEFINE_SPINLOCK(bcm1480_imr_lock);
+static DEFINE_RAW_SPINLOCK(bcm1480_imr_lock);
void bcm1480_mask_irq(int cpu, int irq)
{
unsigned long flags, hl_spacing;
u64 cur_ints;
- spin_lock_irqsave(&bcm1480_imr_lock, flags);
+ raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
hl_spacing = 0;
if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
hl_spacing = BCM1480_IMR_HL_SPACING;
cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
cur_ints |= (((u64) 1) << irq);
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
- spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+ raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
}
void bcm1480_unmask_irq(int cpu, int irq)
unsigned long flags, hl_spacing;
u64 cur_ints;
- spin_lock_irqsave(&bcm1480_imr_lock, flags);
+ raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
hl_spacing = 0;
if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
hl_spacing = BCM1480_IMR_HL_SPACING;
cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
cur_ints &= ~(((u64) 1) << irq);
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
- spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+ raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
}
#ifdef CONFIG_SMP
cpu = cpu_logical_map(i);
/* Protect against other affinity changers and IMR manipulation */
- spin_lock_irqsave(&bcm1480_imr_lock, flags);
+ raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
old_cpu = bcm1480_irq_owner[irq];
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
}
}
- spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+ raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
return 0;
}
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
#include <linux/errno.h>
/* Store the CPU id (not the logical number) */
int sb1250_irq_owner[SB1250_NR_IRQS];
-DEFINE_SPINLOCK(sb1250_imr_lock);
+static DEFINE_RAW_SPINLOCK(sb1250_imr_lock);
void sb1250_mask_irq(int cpu, int irq)
{
unsigned long flags;
u64 cur_ints;
- spin_lock_irqsave(&sb1250_imr_lock, flags);
+ raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
R_IMR_INTERRUPT_MASK));
cur_ints |= (((u64) 1) << irq);
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
R_IMR_INTERRUPT_MASK));
- spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+ raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
}
void sb1250_unmask_irq(int cpu, int irq)
unsigned long flags;
u64 cur_ints;
- spin_lock_irqsave(&sb1250_imr_lock, flags);
+ raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
R_IMR_INTERRUPT_MASK));
cur_ints &= ~(((u64) 1) << irq);
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
R_IMR_INTERRUPT_MASK));
- spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+ raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
}
#ifdef CONFIG_SMP
cpu = cpu_logical_map(i);
/* Protect against other affinity changers and IMR manipulation */
- spin_lock_irqsave(&sb1250_imr_lock, flags);
+ raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
old_cpu = sb1250_irq_owner[irq];
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
R_IMR_INTERRUPT_MASK));
}
- spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+ raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
return 0;
}
* readb/writeb to access them
*/
-DEFINE_SPINLOCK(sni_rm200_i8259A_lock);
+static DEFINE_RAW_SPINLOCK(sni_rm200_i8259A_lock);
#define PIC_CMD 0x00
#define PIC_IMR 0x01
#define PIC_ISR PIC_CMD
irq -= RM200_I8259A_IRQ_BASE;
mask = 1 << irq;
- spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+ raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
rm200_cached_irq_mask |= mask;
if (irq & 8)
writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
else
writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
- spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+ raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
}
static void sni_rm200_enable_8259A_irq(unsigned int irq)
irq -= RM200_I8259A_IRQ_BASE;
mask = ~(1 << irq);
- spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+ raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
rm200_cached_irq_mask &= mask;
if (irq & 8)
writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
else
writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
- spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+ raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
}
static inline int sni_rm200_i8259A_irq_real(unsigned int irq)
irq -= RM200_I8259A_IRQ_BASE;
irqmask = 1 << irq;
- spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+ raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
/*
* Lightweight spurious IRQ detection. We do not want
* to overdo spurious IRQ handling - it's usually a sign
writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
writeb(0x60+irq, rm200_pic_master + PIC_CMD);
}
- spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+ raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
return;
spurious_8259A_irq:
{
int irq;
- spin_lock(&sni_rm200_i8259A_lock);
+ raw_spin_lock(&sni_rm200_i8259A_lock);
/* Perform an interrupt acknowledge cycle on controller 1. */
writeb(0x0C, rm200_pic_master + PIC_CMD); /* prepare for poll */
irq = -1;
}
- spin_unlock(&sni_rm200_i8259A_lock);
+ raw_spin_unlock(&sni_rm200_i8259A_lock);
return likely(irq >= 0) ? irq + RM200_I8259A_IRQ_BASE : irq;
}
{
unsigned long flags;
- spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+ raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
writeb(0xff, rm200_pic_master + PIC_IMR);
writeb(0xff, rm200_pic_slave + PIC_IMR);
writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
- spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+ raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
}
/*
return txx9_system_type;
}
-char * __init prom_getcmdline(void)
-{
- return &(arcs_cmdline[0]);
-}
-
const char *__init prom_getenv(const char *name)
{
const s32 *str;
static void __init jmr3927_mem_setup(void)
{
- char *argptr;
-
set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
_machine_restart = jmr3927_machine_restart;
jmr3927_board_init();
tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (!strstr(argptr, "console="))
- strcat(argptr, " console=ttyS1,115200");
-#endif
}
static void __init jmr3927_pci_setup(void)
static void __init rbtx4927_mem_setup(void)
{
- char *argptr;
-
if (TX4927_REV_PCODE() == 0x4927) {
rbtx4927_clock_init();
tx4927_setup();
gpio_direction_output(15, 1);
tx4927_sio_init(0, 0);
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (!strstr(argptr, "console="))
- strcat(argptr, " console=ttyS0,38400");
-#endif
}
static void __init rbtx4927_clock_init(void)
static void __init rbtx4938_mem_setup(void)
{
unsigned long long pcfg;
- char *argptr;
if (txx9_master_clock == 0)
txx9_master_clock = 25000000; /* 25MHz */
#endif
tx4938_sio_init(7372800, 0);
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (!strstr(argptr, "console="))
- strcat(argptr, " console=ttyS0,38400");
-#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
pr_info("PIOSEL: disabling both ATA and NAND selection\n");
This driver can also be built as a module. If so, the module
will be called i2c-versatile.
+config I2C_OCTEON
+ tristate "Cavium OCTEON I2C bus support"
+ depends on CPU_CAVIUM_OCTEON
+ help
+ Say yes if you want to support the I2C serial bus on Cavium
+ OCTEON SOC.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-octeon.
+
comment "External I2C/SMBus adapter drivers"
config I2C_PARPORT
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
+obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
# External I2C/SMBus adapter drivers
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
--- /dev/null
+/*
+ * (C) Copyright 2009-2010
+ * Nokia Siemens Networks, michael.lawnick.ext@nsn.com
+ *
+ * Portions Copyright (C) 2010 Cavium Networks, Inc.
+ *
+ * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <asm/octeon/octeon.h>
+
+#define DRV_NAME "i2c-octeon"
+
+/* The previous out-of-tree version was implicitly version 1.0. */
+#define DRV_VERSION "2.0"
+
+/* register offsets */
+#define SW_TWSI 0x00
+#define TWSI_INT 0x10
+
+/* Controller command patterns */
+#define SW_TWSI_V 0x8000000000000000ull
+#define SW_TWSI_EOP_TWSI_DATA 0x0C00000100000000ull
+#define SW_TWSI_EOP_TWSI_CTL 0x0C00000200000000ull
+#define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ull
+#define SW_TWSI_EOP_TWSI_STAT 0x0C00000300000000ull
+#define SW_TWSI_EOP_TWSI_RST 0x0C00000700000000ull
+#define SW_TWSI_OP_TWSI_CLK 0x0800000000000000ull
+#define SW_TWSI_R 0x0100000000000000ull
+
+/* Controller command and status bits */
+#define TWSI_CTL_CE 0x80
+#define TWSI_CTL_ENAB 0x40
+#define TWSI_CTL_STA 0x20
+#define TWSI_CTL_STP 0x10
+#define TWSI_CTL_IFLG 0x08
+#define TWSI_CTL_AAK 0x04
+
+/* Some status values */
+#define STAT_START 0x08
+#define STAT_RSTART 0x10
+#define STAT_TXADDR_ACK 0x18
+#define STAT_TXDATA_ACK 0x28
+#define STAT_RXADDR_ACK 0x40
+#define STAT_RXDATA_ACK 0x50
+#define STAT_IDLE 0xF8
+
+struct octeon_i2c {
+ wait_queue_head_t queue;
+ struct i2c_adapter adap;
+ int irq;
+ int twsi_freq;
+ int sys_freq;
+ resource_size_t twsi_phys;
+ void __iomem *twsi_base;
+ resource_size_t regsize;
+ struct device *dev;
+};
+
+/**
+ * octeon_i2c_write_sw - write an I2C core register.
+ * @i2c: The struct octeon_i2c.
+ * @eop_reg: Register selector.
+ * @data: Value to be written.
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static void octeon_i2c_write_sw(struct octeon_i2c *i2c,
+ u64 eop_reg,
+ u8 data)
+{
+ u64 tmp;
+
+ __raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI);
+ do {
+ tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
+ } while ((tmp & SW_TWSI_V) != 0);
+}
+
+/**
+ * octeon_i2c_read_sw - write an I2C core register.
+ * @i2c: The struct octeon_i2c.
+ * @eop_reg: Register selector.
+ *
+ * Returns the data.
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
+{
+ u64 tmp;
+
+ __raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI);
+ do {
+ tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
+ } while ((tmp & SW_TWSI_V) != 0);
+
+ return tmp & 0xFF;
+}
+
+/**
+ * octeon_i2c_write_int - write the TWSI_INT register
+ * @i2c: The struct octeon_i2c.
+ * @data: Value to be written.
+ */
+static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
+{
+ u64 tmp;
+
+ __raw_writeq(data, i2c->twsi_base + TWSI_INT);
+ tmp = __raw_readq(i2c->twsi_base + TWSI_INT);
+}
+
+/**
+ * octeon_i2c_int_enable - enable the TS interrupt.
+ * @i2c: The struct octeon_i2c.
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in
+ * the SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_write_int(i2c, 0x40);
+}
+
+/**
+ * octeon_i2c_int_disable - disable the TS interrupt.
+ * @i2c: The struct octeon_i2c.
+ */
+static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_write_int(i2c, 0);
+}
+
+/**
+ * octeon_i2c_unblock - unblock the bus.
+ * @i2c: The struct octeon_i2c.
+ *
+ * If there was a reset while a device was driving 0 to bus,
+ * bus is blocked. We toggle it free manually by some clock
+ * cycles and send a stop.
+ */
+static void octeon_i2c_unblock(struct octeon_i2c *i2c)
+{
+ int i;
+
+ dev_dbg(i2c->dev, "%s\n", __func__);
+ for (i = 0; i < 9; i++) {
+ octeon_i2c_write_int(i2c, 0x0);
+ udelay(5);
+ octeon_i2c_write_int(i2c, 0x200);
+ udelay(5);
+ }
+ octeon_i2c_write_int(i2c, 0x300);
+ udelay(5);
+ octeon_i2c_write_int(i2c, 0x100);
+ udelay(5);
+ octeon_i2c_write_int(i2c, 0x0);
+}
+
+/**
+ * octeon_i2c_isr - the interrupt service routine.
+ * @int: The irq, unused.
+ * @dev_id: Our struct octeon_i2c.
+ */
+static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
+{
+ struct octeon_i2c *i2c = dev_id;
+
+ octeon_i2c_int_disable(i2c);
+ wake_up_interruptible(&i2c->queue);
+
+ return IRQ_HANDLED;
+}
+
+
+static int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
+{
+ return (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_CTL) & TWSI_CTL_IFLG) != 0;
+}
+
+/**
+ * octeon_i2c_wait - wait for the IFLG to be set.
+ * @i2c: The struct octeon_i2c.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_wait(struct octeon_i2c *i2c)
+{
+ int result;
+
+ octeon_i2c_int_enable(i2c);
+
+ result = wait_event_interruptible_timeout(i2c->queue,
+ octeon_i2c_test_iflg(i2c),
+ i2c->adap.timeout);
+
+ octeon_i2c_int_disable(i2c);
+
+ if (result < 0) {
+ dev_dbg(i2c->dev, "%s: wait interrupted\n", __func__);
+ return result;
+ } else if (result == 0) {
+ dev_dbg(i2c->dev, "%s: timeout\n", __func__);
+ result = -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+/**
+ * octeon_i2c_start - send START to the bus.
+ * @i2c: The struct octeon_i2c.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_start(struct octeon_i2c *i2c)
+{
+ u8 data;
+ int result;
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_STA);
+
+ result = octeon_i2c_wait(i2c);
+ if (result) {
+ if (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT) == STAT_IDLE) {
+ /*
+ * Controller refused to send start flag May
+ * be a client is holding SDA low - let's try
+ * to free it.
+ */
+ octeon_i2c_unblock(i2c);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_STA);
+
+ result = octeon_i2c_wait(i2c);
+ }
+ if (result)
+ return result;
+ }
+
+ data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ if ((data != STAT_START) && (data != STAT_RSTART)) {
+ dev_err(i2c->dev, "%s: bad status (0x%x)\n", __func__, data);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * octeon_i2c_stop - send STOP to the bus.
+ * @i2c: The struct octeon_i2c.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_stop(struct octeon_i2c *i2c)
+{
+ u8 data;
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_STP);
+
+ data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+
+ if (data != STAT_IDLE) {
+ dev_err(i2c->dev, "%s: bad status(0x%x)\n", __func__, data);
+ return -EIO;
+ }
+ return 0;
+}
+
+/**
+ * octeon_i2c_write - send data to the bus.
+ * @i2c: The struct octeon_i2c.
+ * @target: Target address.
+ * @data: Pointer to the data to be sent.
+ * @length: Length of the data.
+ *
+ * The address is sent over the bus, then the data.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
+ const u8 *data, int length)
+{
+ int i, result;
+ u8 tmp;
+
+ result = octeon_i2c_start(i2c);
+ if (result)
+ return result;
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, target << 1);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+
+ for (i = 0; i < length; i++) {
+ tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) {
+ dev_err(i2c->dev,
+ "%s: bad status before write (0x%x)\n",
+ __func__, tmp);
+ return -EIO;
+ }
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, data[i]);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+ }
+
+ return 0;
+}
+
+/**
+ * octeon_i2c_read - receive data from the bus.
+ * @i2c: The struct octeon_i2c.
+ * @target: Target address.
+ * @data: Pointer to the location to store the datae .
+ * @length: Length of the data.
+ *
+ * The address is sent over the bus, then the data is read.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
+ u8 *data, int length)
+{
+ int i, result;
+ u8 tmp;
+
+ if (length < 1)
+ return -EINVAL;
+
+ result = octeon_i2c_start(i2c);
+ if (result)
+ return result;
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+
+ for (i = 0; i < length; i++) {
+ tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) {
+ dev_err(i2c->dev,
+ "%s: bad status before read (0x%x)\n",
+ __func__, tmp);
+ return -EIO;
+ }
+
+ if (i+1 < length)
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_AAK);
+ else
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB);
+
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+
+ data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA);
+ }
+ return 0;
+}
+
+/**
+ * octeon_i2c_xfer - The driver's master_xfer function.
+ * @adap: Pointer to the i2c_adapter structure.
+ * @msgs: Pointer to the messages to be processed.
+ * @num: Length of the MSGS array.
+ *
+ * Returns the number of messages processed, or a negative errno on
+ * failure.
+ */
+static int octeon_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs,
+ int num)
+{
+ struct i2c_msg *pmsg;
+ int i;
+ int ret = 0;
+ struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+
+ for (i = 0; ret == 0 && i < num; i++) {
+ pmsg = &msgs[i];
+ dev_dbg(i2c->dev,
+ "Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n",
+ pmsg->flags & I2C_M_RD ? "read" : "write",
+ pmsg->len, pmsg->addr, i + 1, num);
+ if (pmsg->flags & I2C_M_RD)
+ ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
+ pmsg->len);
+ else
+ ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
+ pmsg->len);
+ }
+ octeon_i2c_stop(i2c);
+
+ return (ret != 0) ? ret : num;
+}
+
+static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm octeon_i2c_algo = {
+ .master_xfer = octeon_i2c_xfer,
+ .functionality = octeon_i2c_functionality,
+};
+
+static struct i2c_adapter octeon_i2c_ops = {
+ .owner = THIS_MODULE,
+ .name = "OCTEON adapter",
+ .algo = &octeon_i2c_algo,
+ .timeout = 2,
+};
+
+/**
+ * octeon_i2c_setclock - Calculate and set clock divisors.
+ */
+static int __init octeon_i2c_setclock(struct octeon_i2c *i2c)
+{
+ int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
+ int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
+
+ for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
+ /*
+ * An mdiv value of less than 2 seems to not work well
+ * with ds1337 RTCs, so we constrain it to larger
+ * values.
+ */
+ for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
+ /*
+ * For given ndiv and mdiv values check the
+ * two closest thp values.
+ */
+ tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
+ tclk *= (1 << ndiv_idx);
+ thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
+ for (inc = 0; inc <= 1; inc++) {
+ thp_idx = thp_base + inc;
+ if (thp_idx < 5 || thp_idx > 0xff)
+ continue;
+
+ foscl = i2c->sys_freq / (2 * (thp_idx + 1));
+ foscl = foscl / (1 << ndiv_idx);
+ foscl = foscl / (mdiv_idx + 1) / 10;
+ diff = abs(foscl - i2c->twsi_freq);
+ if (diff < delta_hz) {
+ delta_hz = diff;
+ thp = thp_idx;
+ mdiv = mdiv_idx;
+ ndiv = ndiv_idx;
+ }
+ }
+ }
+ }
+ octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
+
+ return 0;
+}
+
+static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
+{
+ u8 status;
+ int tries;
+
+ /* disable high level controller, enable bus access */
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+ /* reset controller */
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0);
+
+ for (tries = 10; tries; tries--) {
+ udelay(1);
+ status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ if (status == STAT_IDLE)
+ return 0;
+ }
+ dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status);
+ return -EIO;
+}
+
+static int __devinit octeon_i2c_probe(struct platform_device *pdev)
+{
+ int irq, result = 0;
+ struct octeon_i2c *i2c;
+ struct octeon_i2c_data *i2c_data;
+ struct resource *res_mem;
+
+ /* All adaptors have an irq. */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+ if (!i2c) {
+ dev_err(&pdev->dev, "kzalloc failed\n");
+ result = -ENOMEM;
+ goto out;
+ }
+ i2c->dev = &pdev->dev;
+ i2c_data = pdev->dev.platform_data;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (res_mem == NULL) {
+ dev_err(i2c->dev, "found no memory resource\n");
+ result = -ENXIO;
+ goto fail_region;
+ }
+
+ if (i2c_data == NULL) {
+ dev_err(i2c->dev, "no I2C frequency data\n");
+ result = -ENXIO;
+ goto fail_region;
+ }
+
+ i2c->twsi_phys = res_mem->start;
+ i2c->regsize = resource_size(res_mem);
+ i2c->twsi_freq = i2c_data->i2c_freq;
+ i2c->sys_freq = i2c_data->sys_freq;
+
+ if (!request_mem_region(i2c->twsi_phys, i2c->regsize, res_mem->name)) {
+ dev_err(i2c->dev, "request_mem_region failed\n");
+ goto fail_region;
+ }
+ i2c->twsi_base = ioremap(i2c->twsi_phys, i2c->regsize);
+
+ init_waitqueue_head(&i2c->queue);
+
+ i2c->irq = irq;
+
+ result = request_irq(i2c->irq, octeon_i2c_isr, 0, DRV_NAME, i2c);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto fail_irq;
+ }
+
+ result = octeon_i2c_initlowlevel(i2c);
+ if (result) {
+ dev_err(i2c->dev, "init low level failed\n");
+ goto fail_add;
+ }
+
+ result = octeon_i2c_setclock(i2c);
+ if (result) {
+ dev_err(i2c->dev, "clock init failed\n");
+ goto fail_add;
+ }
+
+ i2c->adap = octeon_i2c_ops;
+ i2c->adap.dev.parent = &pdev->dev;
+ i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0;
+ i2c_set_adapdata(&i2c->adap, i2c);
+ platform_set_drvdata(pdev, i2c);
+
+ result = i2c_add_numbered_adapter(&i2c->adap);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to add adapter\n");
+ goto fail_add;
+ }
+
+ dev_info(i2c->dev, "version %s\n", DRV_VERSION);
+
+ return result;
+
+fail_add:
+ platform_set_drvdata(pdev, NULL);
+ free_irq(i2c->irq, i2c);
+fail_irq:
+ iounmap(i2c->twsi_base);
+ release_mem_region(i2c->twsi_phys, i2c->regsize);
+fail_region:
+ kfree(i2c);
+out:
+ return result;
+};
+
+static int __devexit octeon_i2c_remove(struct platform_device *pdev)
+{
+ struct octeon_i2c *i2c = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&i2c->adap);
+ platform_set_drvdata(pdev, NULL);
+ free_irq(i2c->irq, i2c);
+ iounmap(i2c->twsi_base);
+ release_mem_region(i2c->twsi_phys, i2c->regsize);
+ kfree(i2c);
+ return 0;
+};
+
+static struct platform_driver octeon_i2c_driver = {
+ .probe = octeon_i2c_probe,
+ .remove = __devexit_p(octeon_i2c_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ },
+};
+
+static int __init octeon_i2c_init(void)
+{
+ int rv;
+
+ rv = platform_driver_register(&octeon_i2c_driver);
+ return rv;
+}
+
+static void __exit octeon_i2c_exit(void)
+{
+ platform_driver_unregister(&octeon_i2c_driver);
+}
+
+MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(octeon_i2c_init);
+module_exit(octeon_i2c_exit);
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1,
- DDMA_FLAGS_NOIE)) {
+ if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, virt_to_phys(addr),
+ count << 1, DDMA_FLAGS_NOIE)) {
printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
return;
}
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- if(!put_source_flags(ahwif->tx_chan, (void*)addr,
- count << 1, DDMA_FLAGS_NOIE)) {
+ if (!au1xxx_dbdma_put_source(ahwif->tx_chan, virt_to_phys(addr),
+ count << 1, DDMA_FLAGS_NOIE)) {
printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
return;
}
flags = DDMA_FLAGS_NOIE;
if (iswrite) {
- if(!put_source_flags(ahwif->tx_chan,
- (void*) sg_virt(sg),
- tc, flags)) {
+ if (!au1xxx_dbdma_put_source(ahwif->tx_chan,
+ sg_phys(sg), tc, flags)) {
printk(KERN_ERR "%s failed %d\n",
__func__, __LINE__);
}
- } else
- {
- if(!put_dest_flags(ahwif->rx_chan,
- (void*) sg_virt(sg),
- tc, flags)) {
+ } else {
+ if (!au1xxx_dbdma_put_dest(ahwif->rx_chan,
+ sg_phys(sg), tc, flags)) {
printk(KERN_ERR "%s failed %d\n",
__func__, __LINE__);
}
flags = DDMA_FLAGS_IE;
if (host->flags & HOST_F_XMIT) {
- ret = au1xxx_dbdma_put_source_flags(channel,
- (void *)sg_virt(sg), len, flags);
+ ret = au1xxx_dbdma_put_source(channel,
+ sg_phys(sg), len, flags);
} else {
- ret = au1xxx_dbdma_put_dest_flags(channel,
- (void *)sg_virt(sg), len, flags);
+ ret = au1xxx_dbdma_put_dest(channel,
+ sg_phys(sg), len, flags);
}
if (!ret)
} else
mmc->caps |= MMC_CAP_NEEDS_POLL;
+ /* platform may not be able to use all advertised caps */
+ if (host->platdata)
+ mmc->caps &= ~(host->platdata->mask_host_caps);
+
tasklet_init(&host->data_task, au1xmmc_tasklet_data,
(unsigned long)host);
help
Support for flash chips on NETtel/SecureEdge/SnapGear boards.
-config MTD_ALCHEMY
- tristate "AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support"
- depends on SOC_AU1X00 && MTD_PARTITIONS && MTD_CFI
- help
- Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
-
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
-obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_IMPA7) += impa7.o
+++ /dev/null
-/*
- * Flash memory access on AMD Alchemy evaluation boards
- *
- * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#ifdef CONFIG_MIPS_PB1000
-#define BOARD_MAP_NAME "Pb1000 Flash"
-#define BOARD_FLASH_SIZE 0x00800000 /* 8MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_PB1500
-#define BOARD_MAP_NAME "Pb1500 Flash"
-#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_PB1100
-#define BOARD_MAP_NAME "Pb1100 Flash"
-#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_PB1550
-#define BOARD_MAP_NAME "Pb1550 Flash"
-#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_PB1200
-#define BOARD_MAP_NAME "Pb1200 Flash"
-#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
-#define BOARD_FLASH_WIDTH 2 /* 16-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1000
-#define BOARD_MAP_NAME "Db1000 Flash"
-#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1500
-#define BOARD_MAP_NAME "Db1500 Flash"
-#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1100
-#define BOARD_MAP_NAME "Db1100 Flash"
-#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-#define BOARD_MAP_NAME "Db1550 Flash"
-#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#define BOARD_MAP_NAME "Db1200 Flash"
-#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH 2 /* 16-bits */
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-#define BOARD_MAP_NAME "Bosporus Flash"
-#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */
-#define BOARD_FLASH_WIDTH 2 /* 16-bits */
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-#define BOARD_MAP_NAME "Mirage Flash"
-#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#define USE_LOCAL_ACCESSORS /* why? */
-#endif
-
-static struct map_info alchemy_map = {
- .name = BOARD_MAP_NAME,
-};
-
-static struct mtd_partition alchemy_partitions[] = {
- {
- .name = "User FS",
- .size = BOARD_FLASH_SIZE - 0x00400000,
- .offset = 0x0000000
- },{
- .name = "YAMON",
- .size = 0x0100000,
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE
- },{
- .name = "raw kernel",
- .size = (0x300000 - 0x40000), /* last 256KB is yamon env */
- .offset = MTDPART_OFS_APPEND,
- }
-};
-
-static struct mtd_info *mymtd;
-
-static int __init alchemy_mtd_init(void)
-{
- struct mtd_partition *parts;
- int nb_parts = 0;
- unsigned long window_addr;
- unsigned long window_size;
-
- /* Default flash buswidth */
- alchemy_map.bankwidth = BOARD_FLASH_WIDTH;
-
- window_addr = 0x20000000 - BOARD_FLASH_SIZE;
- window_size = BOARD_FLASH_SIZE;
-
- /*
- * Static partition definition selection
- */
- parts = alchemy_partitions;
- nb_parts = ARRAY_SIZE(alchemy_partitions);
- alchemy_map.size = window_size;
-
- /*
- * Now let's probe for the actual flash. Do it here since
- * specific machine settings might have been set above.
- */
- printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n",
- alchemy_map.bankwidth*8);
- alchemy_map.virt = ioremap(window_addr, window_size);
- mymtd = do_map_probe("cfi_probe", &alchemy_map);
- if (!mymtd) {
- iounmap(alchemy_map.virt);
- return -ENXIO;
- }
- mymtd->owner = THIS_MODULE;
-
- add_mtd_partitions(mymtd, parts, nb_parts);
- return 0;
-}
-
-static void __exit alchemy_mtd_cleanup(void)
-{
- if (mymtd) {
- del_mtd_partitions(mymtd);
- map_destroy(mymtd);
- iounmap(alchemy_map.virt);
- }
-}
-
-module_init(alchemy_mtd_init);
-module_exit(alchemy_mtd_cleanup);
-
-MODULE_AUTHOR("Embedded Alley Solutions, Inc");
-MODULE_DESCRIPTION(BOARD_MAP_NAME " MTD driver");
-MODULE_LICENSE("GPL");
#include <asm/io.h>
#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-db1x00/bcsr.h>
/*
* MTD structure for NAND controller
/* set gpio206 high */
au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
- boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr->status >> 6) & 0x1);
+ boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
+
switch (boot_swapboot) {
case 0:
case 2:
#include <linux/delay.h>
#include <linux/crc32.h>
#include <linux/phy.h>
+#include <linux/platform_device.h>
#include <asm/cpu.h>
#include <asm/mipsregs.h>
#include <asm/processor.h>
#include <au1000.h>
+#include <au1xxx_eth.h>
#include <prom.h>
#include "au1000_eth.h"
*
* PHY detection algorithm
*
- * If AU1XXX_PHY_STATIC_CONFIG is undefined, the PHY setup is
+ * If phy_static_config is undefined, the PHY setup is
* autodetected:
*
* mii_probe() first searches the current MAC's MII bus for a PHY,
- * selecting the first (or last, if AU1XXX_PHY_SEARCH_HIGHEST_ADDR is
+ * selecting the first (or last, if phy_search_highest_addr is
* defined) PHY address not already claimed by another netdev.
*
* If nothing was found that way when searching for the 2nd ethernet
- * controller's PHY and AU1XXX_PHY1_SEARCH_ON_MAC0 is defined, then
+ * controller's PHY and phy1_search_mac0 is defined, then
* the first MII bus is searched as well for an unclaimed PHY; this is
* needed in case of a dual-PHY accessible only through the MAC0's MII
* bus.
* controller is not registered to the network subsystem.
*/
-/* autodetection defaults */
-#undef AU1XXX_PHY_SEARCH_HIGHEST_ADDR
-#define AU1XXX_PHY1_SEARCH_ON_MAC0
+/* autodetection defaults: phy1_search_mac0 */
/* static PHY setup
*
* specific irq-map
*/
-#if defined(CONFIG_MIPS_BOSPORUS)
-/*
- * Micrel/Kendin 5 port switch attached to MAC0,
- * MAC0 is associated with PHY address 5 (== WAN port)
- * MAC1 is not associated with any PHY, since it's connected directly
- * to the switch.
- * no interrupts are used
- */
-# define AU1XXX_PHY_STATIC_CONFIG
-
-# define AU1XXX_PHY0_ADDR 5
-# define AU1XXX_PHY0_BUSID 0
-# undef AU1XXX_PHY0_IRQ
-
-# undef AU1XXX_PHY1_ADDR
-# undef AU1XXX_PHY1_BUSID
-# undef AU1XXX_PHY1_IRQ
-#endif
-
-#if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0)
-# error MAC0-associated PHY attached 2nd MACs MII bus not supported yet
-#endif
-
static void enable_mac(struct net_device *dev, int force_reset)
{
unsigned long flags;
struct au1000_private *const aup = netdev_priv(dev);
struct phy_device *phydev = NULL;
-#if defined(AU1XXX_PHY_STATIC_CONFIG)
- BUG_ON(aup->mac_id < 0 || aup->mac_id > 1);
+ if (aup->phy_static_config) {
+ BUG_ON(aup->mac_id < 0 || aup->mac_id > 1);
- if(aup->mac_id == 0) { /* get PHY0 */
-# if defined(AU1XXX_PHY0_ADDR)
- phydev = au_macs[AU1XXX_PHY0_BUSID]->mii_bus->phy_map[AU1XXX_PHY0_ADDR];
-# else
- printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n",
- dev->name);
- return 0;
-# endif /* defined(AU1XXX_PHY0_ADDR) */
- } else if (aup->mac_id == 1) { /* get PHY1 */
-# if defined(AU1XXX_PHY1_ADDR)
- phydev = au_macs[AU1XXX_PHY1_BUSID]->mii_bus->phy_map[AU1XXX_PHY1_ADDR];
-# else
- printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n",
- dev->name);
+ if (aup->phy_addr)
+ phydev = aup->mii_bus->phy_map[aup->phy_addr];
+ else
+ printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n",
+ dev->name);
return 0;
-# endif /* defined(AU1XXX_PHY1_ADDR) */
- }
-
-#else /* defined(AU1XXX_PHY_STATIC_CONFIG) */
- int phy_addr;
-
- /* find the first (lowest address) PHY on the current MAC's MII bus */
- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
- if (aup->mii_bus->phy_map[phy_addr]) {
- phydev = aup->mii_bus->phy_map[phy_addr];
-# if !defined(AU1XXX_PHY_SEARCH_HIGHEST_ADDR)
- break; /* break out with first one found */
-# endif
- }
+ } else {
+ int phy_addr;
+
+ /* find the first (lowest address) PHY on the current MAC's MII bus */
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
+ if (aup->mii_bus->phy_map[phy_addr]) {
+ phydev = aup->mii_bus->phy_map[phy_addr];
+ if (!aup->phy_search_highest_addr)
+ break; /* break out with first one found */
+ }
-# if defined(AU1XXX_PHY1_SEARCH_ON_MAC0)
- /* try harder to find a PHY */
- if (!phydev && (aup->mac_id == 1)) {
- /* no PHY found, maybe we have a dual PHY? */
- printk (KERN_INFO DRV_NAME ": no PHY found on MAC1, "
- "let's see if it's attached to MAC0...\n");
+ if (aup->phy1_search_mac0) {
+ /* try harder to find a PHY */
+ if (!phydev && (aup->mac_id == 1)) {
+ /* no PHY found, maybe we have a dual PHY? */
+ printk (KERN_INFO DRV_NAME ": no PHY found on MAC1, "
+ "let's see if it's attached to MAC0...\n");
- BUG_ON(!au_macs[0]);
+ /* find the first (lowest address) non-attached PHY on
+ * the MAC0 MII bus */
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+ struct phy_device *const tmp_phydev =
+ aup->mii_bus->phy_map[phy_addr];
- /* find the first (lowest address) non-attached PHY on
- * the MAC0 MII bus */
- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
- struct phy_device *const tmp_phydev =
- au_macs[0]->mii_bus->phy_map[phy_addr];
+ if (aup->mac_id == 1)
+ break;
- if (!tmp_phydev)
- continue; /* no PHY here... */
+ if (!tmp_phydev)
+ continue; /* no PHY here... */
- if (tmp_phydev->attached_dev)
- continue; /* already claimed by MAC0 */
+ if (tmp_phydev->attached_dev)
+ continue; /* already claimed by MAC0 */
- phydev = tmp_phydev;
- break; /* found it */
+ phydev = tmp_phydev;
+ break; /* found it */
+ }
+ }
}
}
-# endif /* defined(AU1XXX_PHY1_SEARCH_OTHER_BUS) */
-#endif /* defined(AU1XXX_PHY_STATIC_CONFIG) */
if (!phydev) {
printk (KERN_ERR DRV_NAME ":%s: no PHY found\n", dev->name);
return -1;
}
}
-static struct {
- u32 base_addr;
- u32 macen_addr;
- int irq;
- struct net_device *dev;
-} iflist[2] = {
-#ifdef CONFIG_SOC_AU1000
- {AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT},
- {AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT}
-#endif
-#ifdef CONFIG_SOC_AU1100
- {AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT}
-#endif
-#ifdef CONFIG_SOC_AU1500
- {AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT},
- {AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT}
-#endif
-#ifdef CONFIG_SOC_AU1550
- {AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT},
- {AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT}
-#endif
-};
-
-static int num_ifs;
-
/*
* ethtool operations
*/
static inline void update_rx_stats(struct net_device *dev, u32 status)
{
- struct au1000_private *aup = netdev_priv(dev);
struct net_device_stats *ps = &dev->stats;
ps->rx_packets++;
}
pDB = aup->tx_db_inuse[aup->tx_head];
- skb_copy_from_linear_data(skb, pDB->vaddr, skb->len);
+ skb_copy_from_linear_data(skb, (void *)pDB->vaddr, skb->len);
if (skb->len < ETH_ZLEN) {
for (i=skb->len; i<ETH_ZLEN; i++) {
((char *)pDB->vaddr)[i] = 0;
.ndo_change_mtu = eth_change_mtu,
};
-static struct net_device * au1000_probe(int port_num)
+static int __devinit au1000_probe(struct platform_device *pdev)
{
static unsigned version_printed = 0;
struct au1000_private *aup = NULL;
+ struct au1000_eth_platform_data *pd;
struct net_device *dev = NULL;
db_dest_t *pDB, *pDBfree;
+ int irq, i, err = 0;
+ struct resource *base, *macen;
char ethaddr[6];
- int irq, i, err;
- u32 base, macen;
- if (port_num >= NUM_ETH_INTERFACES)
- return NULL;
+ base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!base) {
+ printk(KERN_ERR DRV_NAME ": failed to retrieve base register\n");
+ err = -ENODEV;
+ goto out;
+ }
- base = CPHYSADDR(iflist[port_num].base_addr );
- macen = CPHYSADDR(iflist[port_num].macen_addr);
- irq = iflist[port_num].irq;
+ macen = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!macen) {
+ printk(KERN_ERR DRV_NAME ": failed to retrieve MAC Enable register\n");
+ err = -ENODEV;
+ goto out;
+ }
- if (!request_mem_region( base, MAC_IOSIZE, "Au1x00 ENET") ||
- !request_mem_region(macen, 4, "Au1x00 ENET"))
- return NULL;
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ printk(KERN_ERR DRV_NAME ": failed to retrieve IRQ\n");
+ err = -ENODEV;
+ goto out;
+ }
- if (version_printed++ == 0)
- printk("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR);
+ if (!request_mem_region(base->start, resource_size(base), pdev->name)) {
+ printk(KERN_ERR DRV_NAME ": failed to request memory region for base registers\n");
+ err = -ENXIO;
+ goto out;
+ }
+
+ if (!request_mem_region(macen->start, resource_size(macen), pdev->name)) {
+ printk(KERN_ERR DRV_NAME ": failed to request memory region for MAC enable register\n");
+ err = -ENXIO;
+ goto err_request;
+ }
dev = alloc_etherdev(sizeof(struct au1000_private));
if (!dev) {
printk(KERN_ERR "%s: alloc_etherdev failed\n", DRV_NAME);
- return NULL;
+ err = -ENOMEM;
+ goto err_alloc;
}
- dev->base_addr = base;
- dev->irq = irq;
- dev->netdev_ops = &au1000_netdev_ops;
- SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
- dev->watchdog_timeo = ETH_TX_TIMEOUT;
-
- err = register_netdev(dev);
- if (err != 0) {
- printk(KERN_ERR "%s: Cannot register net device, error %d\n",
- DRV_NAME, err);
- free_netdev(dev);
- return NULL;
- }
-
- printk("%s: Au1xx0 Ethernet found at 0x%x, irq %d\n",
- dev->name, base, irq);
-
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ platform_set_drvdata(pdev, dev);
aup = netdev_priv(dev);
spin_lock_init(&aup->lock);
(NUM_TX_BUFFS + NUM_RX_BUFFS),
&aup->dma_addr, 0);
if (!aup->vaddr) {
- free_netdev(dev);
- release_mem_region( base, MAC_IOSIZE);
- release_mem_region(macen, 4);
- return NULL;
+ printk(KERN_ERR DRV_NAME ": failed to allocate data buffers\n");
+ err = -ENOMEM;
+ goto err_vaddr;
}
/* aup->mac is the base address of the MAC's registers */
- aup->mac = (volatile mac_reg_t *)iflist[port_num].base_addr;
+ aup->mac = (volatile mac_reg_t *)ioremap_nocache(base->start, resource_size(base));
+ if (!aup->mac) {
+ printk(KERN_ERR DRV_NAME ": failed to ioremap MAC registers\n");
+ err = -ENXIO;
+ goto err_remap1;
+ }
- /* Setup some variables for quick register address access */
- aup->enable = (volatile u32 *)iflist[port_num].macen_addr;
- aup->mac_id = port_num;
- au_macs[port_num] = aup;
+ /* Setup some variables for quick register address access */
+ aup->enable = (volatile u32 *)ioremap_nocache(macen->start, resource_size(macen));
+ if (!aup->enable) {
+ printk(KERN_ERR DRV_NAME ": failed to ioremap MAC enable register\n");
+ err = -ENXIO;
+ goto err_remap2;
+ }
+ aup->mac_id = pdev->id;
- if (port_num == 0) {
+ if (pdev->id == 0) {
if (prom_get_ethernet_addr(ethaddr) == 0)
memcpy(au1000_mac_addr, ethaddr, sizeof(au1000_mac_addr));
else {
}
setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
- } else if (port_num == 1)
+ } else if (pdev->id == 1)
setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
/*
* to match those that are printed on their stickers
*/
memcpy(dev->dev_addr, au1000_mac_addr, sizeof(au1000_mac_addr));
- dev->dev_addr[5] += port_num;
+ dev->dev_addr[5] += pdev->id;
*aup->enable = 0;
aup->mac_enabled = 0;
+ pd = pdev->dev.platform_data;
+ if (!pd) {
+ printk(KERN_INFO DRV_NAME ": no platform_data passed, PHY search on MAC0\n");
+ aup->phy1_search_mac0 = 1;
+ } else {
+ aup->phy_static_config = pd->phy_static_config;
+ aup->phy_search_highest_addr = pd->phy_search_highest_addr;
+ aup->phy1_search_mac0 = pd->phy1_search_mac0;
+ aup->phy_addr = pd->phy_addr;
+ aup->phy_busid = pd->phy_busid;
+ aup->phy_irq = pd->phy_irq;
+ }
+
+ if (aup->phy_busid && aup->phy_busid > 0) {
+ printk(KERN_ERR DRV_NAME ": MAC0-associated PHY attached 2nd MACs MII"
+ "bus not supported yet\n");
+ err = -ENODEV;
+ goto err_mdiobus_alloc;
+ }
+
aup->mii_bus = mdiobus_alloc();
- if (aup->mii_bus == NULL)
- goto err_out;
+ if (aup->mii_bus == NULL) {
+ printk(KERN_ERR DRV_NAME ": failed to allocate mdiobus structure\n");
+ err = -ENOMEM;
+ goto err_mdiobus_alloc;
+ }
aup->mii_bus->priv = dev;
aup->mii_bus->read = au1000_mdiobus_read;
for(i = 0; i < PHY_MAX_ADDR; ++i)
aup->mii_bus->irq[i] = PHY_POLL;
-
/* if known, set corresponding PHY IRQs */
-#if defined(AU1XXX_PHY_STATIC_CONFIG)
-# if defined(AU1XXX_PHY0_IRQ)
- if (AU1XXX_PHY0_BUSID == aup->mac_id)
- aup->mii_bus->irq[AU1XXX_PHY0_ADDR] = AU1XXX_PHY0_IRQ;
-# endif
-# if defined(AU1XXX_PHY1_IRQ)
- if (AU1XXX_PHY1_BUSID == aup->mac_id)
- aup->mii_bus->irq[AU1XXX_PHY1_ADDR] = AU1XXX_PHY1_IRQ;
-# endif
-#endif
- mdiobus_register(aup->mii_bus);
+ if (aup->phy_static_config)
+ if (aup->phy_irq && aup->phy_busid == aup->mac_id)
+ aup->mii_bus->irq[aup->phy_addr] = aup->phy_irq;
+
+ err = mdiobus_register(aup->mii_bus);
+ if (err) {
+ printk(KERN_ERR DRV_NAME " failed to register MDIO bus\n");
+ goto err_mdiobus_reg;
+ }
- if (mii_probe(dev) != 0) {
+ if (mii_probe(dev) != 0)
goto err_out;
- }
pDBfree = NULL;
/* setup the data buffer descriptors and attach a buffer to each one */
aup->tx_db_inuse[i] = pDB;
}
+ dev->base_addr = base->start;
+ dev->irq = irq;
+ dev->netdev_ops = &au1000_netdev_ops;
+ SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
+ dev->watchdog_timeo = ETH_TX_TIMEOUT;
+
/*
* The boot code uses the ethernet controller, so reset it to start
* fresh. au1000_init() expects that the device is in reset state.
*/
reset_mac(dev);
- return dev;
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR DRV_NAME "%s: Cannot register net device, aborting.\n",
+ dev->name);
+ goto err_out;
+ }
+
+ printk("%s: Au1xx0 Ethernet found at 0x%lx, irq %d\n",
+ dev->name, (unsigned long)base->start, irq);
+ if (version_printed++ == 0)
+ printk("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR);
+
+ return 0;
err_out:
- if (aup->mii_bus != NULL) {
+ if (aup->mii_bus != NULL)
mdiobus_unregister(aup->mii_bus);
- mdiobus_free(aup->mii_bus);
- }
/* here we should have a valid dev plus aup-> register addresses
* so we can reset the mac properly.*/
if (aup->tx_db_inuse[i])
ReleaseDB(aup, aup->tx_db_inuse[i]);
}
+err_mdiobus_reg:
+ mdiobus_free(aup->mii_bus);
+err_mdiobus_alloc:
+ iounmap(aup->enable);
+err_remap2:
+ iounmap(aup->mac);
+err_remap1:
dma_free_noncoherent(NULL, MAX_BUF_SIZE * (NUM_TX_BUFFS + NUM_RX_BUFFS),
(void *)aup->vaddr, aup->dma_addr);
- unregister_netdev(dev);
+err_vaddr:
free_netdev(dev);
- release_mem_region( base, MAC_IOSIZE);
- release_mem_region(macen, 4);
- return NULL;
+err_alloc:
+ release_mem_region(macen->start, resource_size(macen));
+err_request:
+ release_mem_region(base->start, resource_size(base));
+out:
+ return err;
}
-/*
- * Setup the base address and interrupt of the Au1xxx ethernet macs
- * based on cpu type and whether the interface is enabled in sys_pinfunc
- * register. The last interface is enabled if SYS_PF_NI2 (bit 4) is 0.
- */
-static int __init au1000_init_module(void)
+static int __devexit au1000_remove(struct platform_device *pdev)
{
- int ni = (int)((au_readl(SYS_PINFUNC) & (u32)(SYS_PF_NI2)) >> 4);
- struct net_device *dev;
- int i, found_one = 0;
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct au1000_private *aup = netdev_priv(dev);
+ int i;
+ struct resource *base, *macen;
- num_ifs = NUM_ETH_INTERFACES - ni;
+ platform_set_drvdata(pdev, NULL);
+
+ unregister_netdev(dev);
+ mdiobus_unregister(aup->mii_bus);
+ mdiobus_free(aup->mii_bus);
+
+ for (i = 0; i < NUM_RX_DMA; i++)
+ if (aup->rx_db_inuse[i])
+ ReleaseDB(aup, aup->rx_db_inuse[i]);
+
+ for (i = 0; i < NUM_TX_DMA; i++)
+ if (aup->tx_db_inuse[i])
+ ReleaseDB(aup, aup->tx_db_inuse[i]);
+
+ dma_free_noncoherent(NULL, MAX_BUF_SIZE *
+ (NUM_TX_BUFFS + NUM_RX_BUFFS),
+ (void *)aup->vaddr, aup->dma_addr);
+
+ iounmap(aup->mac);
+ iounmap(aup->enable);
+
+ base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(base->start, resource_size(base));
+
+ macen = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ release_mem_region(macen->start, resource_size(macen));
+
+ free_netdev(dev);
- for(i = 0; i < num_ifs; i++) {
- dev = au1000_probe(i);
- iflist[i].dev = dev;
- if (dev)
- found_one++;
- }
- if (!found_one)
- return -ENODEV;
return 0;
}
-static void __exit au1000_cleanup_module(void)
+static struct platform_driver au1000_eth_driver = {
+ .probe = au1000_probe,
+ .remove = __devexit_p(au1000_remove),
+ .driver = {
+ .name = "au1000-eth",
+ .owner = THIS_MODULE,
+ },
+};
+MODULE_ALIAS("platform:au1000-eth");
+
+
+static int __init au1000_init_module(void)
+{
+ return platform_driver_register(&au1000_eth_driver);
+}
+
+static void __exit au1000_exit_module(void)
{
- int i, j;
- struct net_device *dev;
- struct au1000_private *aup;
-
- for (i = 0; i < num_ifs; i++) {
- dev = iflist[i].dev;
- if (dev) {
- aup = netdev_priv(dev);
- unregister_netdev(dev);
- mdiobus_unregister(aup->mii_bus);
- mdiobus_free(aup->mii_bus);
- for (j = 0; j < NUM_RX_DMA; j++)
- if (aup->rx_db_inuse[j])
- ReleaseDB(aup, aup->rx_db_inuse[j]);
- for (j = 0; j < NUM_TX_DMA; j++)
- if (aup->tx_db_inuse[j])
- ReleaseDB(aup, aup->tx_db_inuse[j]);
- dma_free_noncoherent(NULL, MAX_BUF_SIZE *
- (NUM_TX_BUFFS + NUM_RX_BUFFS),
- (void *)aup->vaddr, aup->dma_addr);
- release_mem_region(dev->base_addr, MAC_IOSIZE);
- release_mem_region(CPHYSADDR(iflist[i].macen_addr), 4);
- free_netdev(dev);
- }
- }
+ platform_driver_unregister(&au1000_eth_driver);
}
module_init(au1000_init_module);
-module_exit(au1000_cleanup_module);
+module_exit(au1000_exit_module);
struct phy_device *phy_dev;
struct mii_bus *mii_bus;
+ /* PHY configuration */
+ int phy_static_config;
+ int phy_search_highest_addr;
+ int phy1_search_mac0;
+
+ int phy_addr;
+ int phy_busid;
+ int phy_irq;
+
/* These variables are just for quick access to certain regs addresses. */
volatile mac_reg_t *mac; /* mac registers */
volatile u32 *enable; /* address of MAC Enable Register */
#include <linux/phy_fixed.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/clk.h>
#include <asm/gpio.h>
#include <asm/atomic.h>
static int cpmac_mdio_reset(struct mii_bus *bus)
{
+ struct clk *cpmac_clk;
+
+ cpmac_clk = clk_get(&bus->dev, "cpmac");
+ if (IS_ERR(cpmac_clk)) {
+ printk(KERN_ERR "unable to get cpmac clock\n");
+ return -1;
+ }
ar7_device_reset(AR7_RESET_BIT_MDIO);
cpmac_write(bus->priv, CPMAC_MDIO_CONTROL, MDIOC_ENABLE |
- MDIOC_CLKDIV(ar7_cpmac_freq() / 2200000 - 1));
+ MDIOC_CLKDIV(clk_get_rate(cpmac_clk) / 2200000 - 1));
return 0;
}
#include <asm/pb1000.h>
#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
#include <asm/db1x00.h>
+#include <asm/mach-db1x00/bcsr.h>
#else
#error au1k_ir: unsupported board
#endif
#define RUN_AT(x) (jiffies + (x))
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-static BCSR * const bcsr = (BCSR *)0xAE000000;
-#endif
-
static DEFINE_SPINLOCK(ir_lock);
/*
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
/* power on */
- bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
- bcsr->resets |= BCSR_RESETS_IRDA_MODE_FULL;
- au_sync();
+ bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+ BCSR_RESETS_IRDA_MODE_FULL);
#endif
return 0;
if (speed == 4000000) {
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
- bcsr->resets |= BCSR_RESETS_FIR_SEL;
+ bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_FIR_SEL);
#else /* Pb1000 and Pb1100 */
writel(1<<13, CPLD_AUX1);
#endif
}
else {
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
- bcsr->resets &= ~BCSR_RESETS_FIR_SEL;
+ bcsr_mod(BCSR_RESETS, BCSR_RESETS_FIR_SEL, 0);
#else /* Pb1000 and Pb1100 */
writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1);
#endif
tristate "Au1x00 pcmcia support"
depends on SOC_AU1X00 && PCMCIA
+config PCMCIA_ALCHEMY_DEVBOARD
+ tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
+ depends on SOC_AU1X00 && PCMCIA
+ select 64BIT_PHYS_ADDR
+ help
+ Enable this driver of you want PCMCIA support on your Alchemy
+ Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
+ NOT suitable for the PB1000!
+
+ This driver is also available as a module called db1xxx_ss.ko
+
+config PCMCIA_XXS1500
+ tristate "MyCable XXS1500 PCMCIA socket support"
+ depends on PCMCIA && MIPS_XXS1500
+ select 64BIT_PHYS_ADDR
+ help
+ Support for the PCMCIA/CF socket interface on MyCable XXS1500
+ systems.
+
+ This driver is also available as a module called xxs1500_ss.ko
+
config PCMCIA_BCM63XX
tristate "bcm63xx pcmcia support"
depends on BCM63XX && PCMCIA
obj-$(CONFIG_BFIN_CFPCMCIA) += bfin_cf_pcmcia.o
obj-$(CONFIG_AT91_CF) += at91_cf.o
obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
+obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD) += db1xxx_ss.o
au1x00_ss-y += au1000_generic.o
au1x00_ss-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o
-au1x00_ss-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o
-au1x00_ss-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o
sa1111_cs-y += sa1111_generic.o
sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1100_neponset.o
pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y)
+
+obj-$(CONFIG_PCMCIA_XXS1500) += xxs1500_ss.o
+++ /dev/null
-/*
- *
- * Alchemy Semi Db1x00 boards specific pcmcia routines.
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * Copyright 2004 Pete Popov, updated the driver to 2.6.
- * Followed the sa11xx API and largely copied many of the hardware
- * independent functions.
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/signal.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#if defined(CONFIG_MIPS_DB1200)
- #include <db1200.h>
-#elif defined(CONFIG_MIPS_PB1200)
- #include <pb1200.h>
-#else
- #include <asm/mach-db1x00/db1x00.h>
- static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-#endif
-
-#include "au1000_generic.h"
-
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
-
-
-struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS];
-extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int);
-
-static int db1x00_pcmcia_hw_init(struct au1000_pcmcia_socket *skt)
-{
-#ifdef CONFIG_MIPS_DB1550
- skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3;
-#elif defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
- skt->irq = skt->nr ? BOARD_PC1_INT : BOARD_PC0_INT;
-#else
- skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2;
-#endif
- return 0;
-}
-
-static void db1x00_pcmcia_shutdown(struct au1000_pcmcia_socket *skt)
-{
- bcsr->pcmcia = 0; /* turn off power */
- au_sync_delay(2);
-}
-
-static void
-db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state *state)
-{
- u32 inserted;
- unsigned char vs;
-
- state->ready = 0;
- state->vs_Xv = 0;
- state->vs_3v = 0;
- state->detect = 0;
-
- switch (skt->nr) {
- case 0:
- vs = bcsr->status & 0x3;
-#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
- inserted = BOARD_CARD_INSERTED(0);
-#else
- inserted = !(bcsr->status & (1<<4));
-#endif
- break;
- case 1:
- vs = (bcsr->status & 0xC)>>2;
-#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
- inserted = BOARD_CARD_INSERTED(1);
-#else
- inserted = !(bcsr->status & (1<<5));
-#endif
- break;
- default:/* should never happen */
- return;
- }
-
- if (inserted)
- debug("db1x00 socket %d: inserted %d, vs %d pcmcia %x\n",
- skt->nr, inserted, vs, bcsr->pcmcia);
-
- if (inserted) {
- switch (vs) {
- case 0:
- case 2:
- state->vs_3v=1;
- break;
- case 3: /* 5V */
- break;
- default:
- /* return without setting 'detect' */
- printk(KERN_ERR "db1x00 bad VS (%d)\n",
- vs);
- }
- state->detect = 1;
- state->ready = 1;
- }
- else {
- /* if the card was previously inserted and then ejected,
- * we should turn off power to it
- */
- if ((skt->nr == 0) && (bcsr->pcmcia & BCSR_PCMCIA_PC0RST)) {
- bcsr->pcmcia &= ~(BCSR_PCMCIA_PC0RST |
- BCSR_PCMCIA_PC0DRVEN |
- BCSR_PCMCIA_PC0VPP |
- BCSR_PCMCIA_PC0VCC);
- au_sync_delay(10);
- }
- else if ((skt->nr == 1) && bcsr->pcmcia & BCSR_PCMCIA_PC1RST) {
- bcsr->pcmcia &= ~(BCSR_PCMCIA_PC1RST |
- BCSR_PCMCIA_PC1DRVEN |
- BCSR_PCMCIA_PC1VPP |
- BCSR_PCMCIA_PC1VCC);
- au_sync_delay(10);
- }
- }
-
- state->bvd1=1;
- state->bvd2=1;
- state->wrprot=0;
-}
-
-static int
-db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_state_t *state)
-{
- u16 pwr;
- int sock = skt->nr;
-
- debug("config_skt %d Vcc %dV Vpp %dV, reset %d\n",
- sock, state->Vcc, state->Vpp,
- state->flags & SS_RESET);
-
- /* pcmcia reg was set to zero at init time. Be careful when
- * initializing a socket not to wipe out the settings of the
- * other socket.
- */
- pwr = bcsr->pcmcia;
- pwr &= ~(0xf << sock*8); /* clear voltage settings */
-
- state->Vpp = 0;
- switch(state->Vcc){
- case 0: /* Vcc 0 */
- pwr |= SET_VCC_VPP(0,0,sock);
- break;
- case 50: /* Vcc 5V */
- switch(state->Vpp) {
- case 0:
- pwr |= SET_VCC_VPP(2,0,sock);
- break;
- case 50:
- pwr |= SET_VCC_VPP(2,1,sock);
- break;
- case 12:
- pwr |= SET_VCC_VPP(2,2,sock);
- break;
- case 33:
- default:
- pwr |= SET_VCC_VPP(0,0,sock);
- printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __func__,
- state->Vcc,
- state->Vpp);
- break;
- }
- break;
- case 33: /* Vcc 3.3V */
- switch(state->Vpp) {
- case 0:
- pwr |= SET_VCC_VPP(1,0,sock);
- break;
- case 12:
- pwr |= SET_VCC_VPP(1,2,sock);
- break;
- case 33:
- pwr |= SET_VCC_VPP(1,1,sock);
- break;
- case 50:
- default:
- pwr |= SET_VCC_VPP(0,0,sock);
- printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __func__,
- state->Vcc,
- state->Vpp);
- break;
- }
- break;
- default: /* what's this ? */
- pwr |= SET_VCC_VPP(0,0,sock);
- printk(KERN_ERR "%s: bad Vcc %d\n",
- __func__, state->Vcc);
- break;
- }
-
- bcsr->pcmcia = pwr;
- au_sync_delay(300);
-
- if (sock == 0) {
- if (!(state->flags & SS_RESET)) {
- pwr |= BCSR_PCMCIA_PC0DRVEN;
- bcsr->pcmcia = pwr;
- au_sync_delay(300);
- pwr |= BCSR_PCMCIA_PC0RST;
- bcsr->pcmcia = pwr;
- au_sync_delay(100);
- }
- else {
- pwr &= ~(BCSR_PCMCIA_PC0RST | BCSR_PCMCIA_PC0DRVEN);
- bcsr->pcmcia = pwr;
- au_sync_delay(100);
- }
- }
- else {
- if (!(state->flags & SS_RESET)) {
- pwr |= BCSR_PCMCIA_PC1DRVEN;
- bcsr->pcmcia = pwr;
- au_sync_delay(300);
- pwr |= BCSR_PCMCIA_PC1RST;
- bcsr->pcmcia = pwr;
- au_sync_delay(100);
- }
- else {
- pwr &= ~(BCSR_PCMCIA_PC1RST | BCSR_PCMCIA_PC1DRVEN);
- bcsr->pcmcia = pwr;
- au_sync_delay(100);
- }
- }
- return 0;
-}
-
-/*
- * Enable card status IRQs on (re-)initialisation. This can
- * be called at initialisation, power management event, or
- * pcmcia event.
- */
-void db1x00_socket_init(struct au1000_pcmcia_socket *skt)
-{
- /* nothing to do for now */
-}
-
-/*
- * Disable card status IRQs and PCMCIA bus on suspend.
- */
-void db1x00_socket_suspend(struct au1000_pcmcia_socket *skt)
-{
- /* nothing to do for now */
-}
-
-struct pcmcia_low_level db1x00_pcmcia_ops = {
- .owner = THIS_MODULE,
-
- .hw_init = db1x00_pcmcia_hw_init,
- .hw_shutdown = db1x00_pcmcia_shutdown,
-
- .socket_state = db1x00_pcmcia_socket_state,
- .configure_socket = db1x00_pcmcia_configure_socket,
-
- .socket_init = db1x00_socket_init,
- .socket_suspend = db1x00_socket_suspend
-};
-
-int au1x_board_init(struct device *dev)
-{
- int ret = -ENODEV;
- bcsr->pcmcia = 0; /* turn off power, if it's not already off */
- au_sync_delay(2);
- ret = au1x00_pcmcia_socket_probe(dev, &db1x00_pcmcia_ops, 0, 2);
- return ret;
-}
skt->virt_io = (void *)
(ioremap((phys_t)AU1X_SOCK0_IO, 0x1000) -
(u32)mips_io_port_base);
- skt->phys_attr = AU1X_SOCK0_PSEUDO_PHYS_ATTR;
- skt->phys_mem = AU1X_SOCK0_PSEUDO_PHYS_MEM;
+ skt->phys_attr = AU1X_SOCK0_PHYS_ATTR;
+ skt->phys_mem = AU1X_SOCK0_PHYS_MEM;
}
-#ifndef CONFIG_MIPS_XXS1500
else {
skt->virt_io = (void *)
(ioremap((phys_t)AU1X_SOCK1_IO, 0x1000) -
(u32)mips_io_port_base);
- skt->phys_attr = AU1X_SOCK1_PSEUDO_PHYS_ATTR;
- skt->phys_mem = AU1X_SOCK1_PSEUDO_PHYS_MEM;
+ skt->phys_attr = AU1X_SOCK1_PHYS_ATTR;
+ skt->phys_mem = AU1X_SOCK1_PHYS_MEM;
}
-#endif
pcmcia_base_vaddrs[i] = (u32 *)skt->virt_io;
ret = ops->hw_init(skt);
#define AU1X_SOCK0_IO 0xF00000000ULL
#define AU1X_SOCK0_PHYS_ATTR 0xF40000000ULL
#define AU1X_SOCK0_PHYS_MEM 0xF80000000ULL
-/* pseudo 32 bit phys addresses, which get fixed up to the
- * real 36 bit address in fixup_bigphys_addr() */
-#define AU1X_SOCK0_PSEUDO_PHYS_ATTR 0xF4000000
-#define AU1X_SOCK0_PSEUDO_PHYS_MEM 0xF8000000
/* pcmcia socket 1 needs external glue logic so the memory map
* differs from board to board.
*/
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || \
- defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550) || \
- defined(CONFIG_MIPS_PB1200)
+#if defined(CONFIG_MIPS_PB1000)
#define AU1X_SOCK1_IO 0xF08000000ULL
#define AU1X_SOCK1_PHYS_ATTR 0xF48000000ULL
#define AU1X_SOCK1_PHYS_MEM 0xF88000000ULL
-#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4800000
-#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8800000
-#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
- defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) || \
- defined(CONFIG_MIPS_DB1200)
-#define AU1X_SOCK1_IO 0xF04000000ULL
-#define AU1X_SOCK1_PHYS_ATTR 0xF44000000ULL
-#define AU1X_SOCK1_PHYS_MEM 0xF84000000ULL
-#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4400000
-#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8400000
#endif
struct pcmcia_state {
/*
*
- * Alchemy Semi Pb1x00 boards specific pcmcia routines.
+ * Alchemy Semi Pb1000 boards specific pcmcia routines.
*
* Copyright 2002 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
#define debug(fmt, arg...) do { } while (0)
-#ifdef CONFIG_MIPS_PB1000
#include <asm/pb1000.h>
#define PCMCIA_IRQ AU1000_GPIO_15
-#elif defined (CONFIG_MIPS_PB1500)
-#include <asm/pb1500.h>
-#define PCMCIA_IRQ AU1500_GPIO_203
-#elif defined (CONFIG_MIPS_PB1100)
-#include <asm/pb1100.h>
-#define PCMCIA_IRQ AU1000_GPIO_11
-#endif
static int pb1x00_pcmcia_init(struct pcmcia_init *init)
{
-#ifdef CONFIG_MIPS_PB1000
u16 pcr;
pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
au_sync_delay(20);
return PCMCIA_NUM_SOCKS;
-
-#else /* fixme -- take care of the Pb1500 at some point */
-
- u16 pcr;
- pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
- pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
- au_writew(pcr, PCMCIA_BOARD_REG);
- au_sync_delay(500);
- return PCMCIA_NUM_SOCKS;
-#endif
}
static int pb1x00_pcmcia_shutdown(void)
{
-#ifdef CONFIG_MIPS_PB1000
u16 pcr;
pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
au_writel(pcr, PB1000_PCR);
au_sync_delay(20);
return 0;
-#else
- u16 pcr;
- pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
- pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
- au_writew(pcr, PCMCIA_BOARD_REG);
- au_sync_delay(2);
- return 0;
-#endif
}
static int
u32 inserted0, inserted1;
u16 vs0, vs1;
-#ifdef CONFIG_MIPS_PB1000
vs0 = vs1 = (u16)au_readl(PB1000_ACR1);
inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2));
inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2));
vs0 = (vs0 >> 4) & 0x3;
vs1 = (vs1 >> 12) & 0x3;
-#else
- vs0 = (au_readw(BOARD_STATUS_REG) >> 4) & 0x3;
-#ifdef CONFIG_MIPS_PB1500
- inserted0 = !((au_readl(GPIO2_PINSTATE) >> 1) & 0x1); /* gpio 201 */
-#else /* Pb1100 */
- inserted0 = !((au_readl(SYS_PINSTATERD) >> 9) & 0x1); /* gpio 9 */
-#endif
- inserted1 = 0;
-#endif
state->ready = 0;
state->vs_Xv = 0;
if(configure->sock > PCMCIA_MAX_SOCK) return -1;
-#ifdef CONFIG_MIPS_PB1000
pcr = au_readl(PB1000_PCR);
if (configure->sock == 0) {
au_writel(pcr, PB1000_PCR);
au_sync_delay(300);
-#else
-
- pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf;
-
- debug("Vcc %dV Vpp %dV, pcr %x, reset %d\n",
- configure->vcc, configure->vpp, pcr, configure->reset);
-
-
- switch(configure->vcc){
- case 0: /* Vcc 0 */
- pcr |= SET_VCC_VPP(0,0);
- break;
- case 50: /* Vcc 5V */
- switch(configure->vpp) {
- case 0:
- pcr |= SET_VCC_VPP(2,0);
- break;
- case 50:
- pcr |= SET_VCC_VPP(2,1);
- break;
- case 12:
- pcr |= SET_VCC_VPP(2,2);
- break;
- case 33:
- default:
- pcr |= SET_VCC_VPP(0,0);
- printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __func__,
- configure->vcc,
- configure->vpp);
- break;
- }
- break;
- case 33: /* Vcc 3.3V */
- switch(configure->vpp) {
- case 0:
- pcr |= SET_VCC_VPP(1,0);
- break;
- case 12:
- pcr |= SET_VCC_VPP(1,2);
- break;
- case 33:
- pcr |= SET_VCC_VPP(1,1);
- break;
- case 50:
- default:
- pcr |= SET_VCC_VPP(0,0);
- printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __func__,
- configure->vcc,
- configure->vpp);
- break;
- }
- break;
- default: /* what's this ? */
- pcr |= SET_VCC_VPP(0,0);
- printk(KERN_ERR "%s: bad Vcc %d\n",
- __func__, configure->vcc);
- break;
- }
-
- au_writew(pcr, PCMCIA_BOARD_REG);
- au_sync_delay(300);
-
- if (!configure->reset) {
- pcr |= PC_DRV_EN;
- au_writew(pcr, PCMCIA_BOARD_REG);
- au_sync_delay(100);
- pcr |= PC_DEASSERT_RST;
- au_writew(pcr, PCMCIA_BOARD_REG);
- au_sync_delay(100);
- }
- else {
- pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
- au_writew(pcr, PCMCIA_BOARD_REG);
- au_sync_delay(100);
- }
-#endif
return 0;
}
+++ /dev/null
-/*
- *
- * MyCable board specific pcmcia routines.
- *
- * Copyright 2003 MontaVista Software Inc.
- * Author: Pete Popov, MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/proc_fs.h>
-#include <linux/types.h>
-
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/ss.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/bus_ops.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-#include <asm/au1000.h>
-#include <asm/au1000_pcmcia.h>
-
-#define PCMCIA_MAX_SOCK 0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-#define PCMCIA_IRQ AU1000_GPIO_4
-
-#if 0
-#define DEBUG(x, args...) printk(__func__ ": " x, ##args)
-#else
-#define DEBUG(x,args...)
-#endif
-
-static int xxs1500_pcmcia_init(struct pcmcia_init *init)
-{
- return PCMCIA_NUM_SOCKS;
-}
-
-static int xxs1500_pcmcia_shutdown(void)
-{
- /* turn off power */
- au_writel(au_readl(GPIO2_PINSTATE) | (1<<14)|(1<<30),
- GPIO2_OUTPUT);
- au_sync_delay(100);
-
- /* assert reset */
- au_writel(au_readl(GPIO2_PINSTATE) | (1<<4)|(1<<20),
- GPIO2_OUTPUT);
- au_sync_delay(100);
- return 0;
-}
-
-
-static int
-xxs1500_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
-{
- u32 inserted; u32 vs;
- unsigned long gpio, gpio2;
-
- if(sock > PCMCIA_MAX_SOCK) return -1;
-
- gpio = au_readl(SYS_PINSTATERD);
- gpio2 = au_readl(GPIO2_PINSTATE);
-
- vs = gpio2 & ((1<<8) | (1<<9));
- inserted = (!(gpio & 0x1) && !(gpio & 0x2));
-
- state->ready = 0;
- state->vs_Xv = 0;
- state->vs_3v = 0;
- state->detect = 0;
-
- if (inserted) {
- switch (vs) {
- case 0:
- case 1:
- case 2:
- state->vs_3v=1;
- break;
- case 3: /* 5V */
- default:
- /* return without setting 'detect' */
- printk(KERN_ERR "au1x00_cs: unsupported VS\n",
- vs);
- return;
- }
- state->detect = 1;
- }
-
- if (state->detect) {
- state->ready = 1;
- }
-
- state->bvd1= gpio2 & (1<<10);
- state->bvd2 = gpio2 & (1<<11);
- state->wrprot=0;
- return 1;
-}
-
-
-static int xxs1500_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
-{
-
- if(info->sock > PCMCIA_MAX_SOCK) return -1;
- info->irq = PCMCIA_IRQ;
- return 0;
-}
-
-
-static int
-xxs1500_pcmcia_configure_socket(const struct pcmcia_configure *configure)
-{
-
- if(configure->sock > PCMCIA_MAX_SOCK) return -1;
-
- DEBUG("Vcc %dV Vpp %dV, reset %d\n",
- configure->vcc, configure->vpp, configure->reset);
-
- switch(configure->vcc){
- case 33: /* Vcc 3.3V */
- /* turn on power */
- DEBUG("turn on power\n");
- au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30),
- GPIO2_OUTPUT);
- au_sync_delay(100);
- break;
- case 50: /* Vcc 5V */
- default: /* what's this ? */
- printk(KERN_ERR "au1x00_cs: unsupported VCC\n");
- case 0: /* Vcc 0 */
- /* turn off power */
- au_sync_delay(100);
- au_writel(au_readl(GPIO2_PINSTATE) | (1<<14)|(1<<30),
- GPIO2_OUTPUT);
- break;
- }
-
- if (!configure->reset) {
- DEBUG("deassert reset\n");
- au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<4))|(1<<20),
- GPIO2_OUTPUT);
- au_sync_delay(100);
- au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<5))|(1<<21),
- GPIO2_OUTPUT);
- }
- else {
- DEBUG("assert reset\n");
- au_writel(au_readl(GPIO2_PINSTATE) | (1<<4)|(1<<20),
- GPIO2_OUTPUT);
- }
- au_sync_delay(100);
- return 0;
-}
-
-struct pcmcia_low_level xxs1500_pcmcia_ops = {
- xxs1500_pcmcia_init,
- xxs1500_pcmcia_shutdown,
- xxs1500_pcmcia_socket_state,
- xxs1500_pcmcia_get_irq_info,
- xxs1500_pcmcia_configure_socket
-};
--- /dev/null
+/*
+ * PCMCIA socket code for the Alchemy Db1xxx/Pb1xxx boards.
+ *
+ * Copyright (c) 2009 Manuel Lauss <manuel.lauss@gmail.com>
+ *
+ */
+
+/* This is a fairly generic PCMCIA socket driver suitable for the
+ * following Alchemy Development boards:
+ * Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200.
+ *
+ * The Db1000 is used as a reference: Per-socket card-, carddetect- and
+ * statuschange IRQs connected to SoC GPIOs, control and status register
+ * bits arranged in per-socket groups in an external PLD. All boards
+ * listed here use this layout, including bit positions and meanings.
+ * Of course there are exceptions in later boards:
+ *
+ * - Pb1100/Pb1500: single socket only; voltage key bits VS are
+ * at STATUS[5:4] (instead of STATUS[1:0]).
+ * - Au1200-based: additional card-eject irqs, irqs not gpios!
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/spinlock.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/ss.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#define MEM_MAP_SIZE 0x400000
+#define IO_MAP_SIZE 0x1000
+
+struct db1x_pcmcia_sock {
+ struct pcmcia_socket socket;
+ int nr; /* socket number */
+ void *virt_io;
+
+ /* the "pseudo" addresses of the PCMCIA space. */
+ phys_addr_t phys_io;
+ phys_addr_t phys_attr;
+ phys_addr_t phys_mem;
+
+ /* previous flags for set_socket() */
+ unsigned int old_flags;
+
+ /* interrupt sources: linux irq numbers! */
+ int insert_irq; /* default carddetect irq */
+ int stschg_irq; /* card-status-change irq */
+ int card_irq; /* card irq */
+ int eject_irq; /* db1200/pb1200 have these */
+
+#define BOARD_TYPE_DEFAULT 0 /* most boards */
+#define BOARD_TYPE_DB1200 1 /* IRQs aren't gpios */
+#define BOARD_TYPE_PB1100 2 /* VS bits slightly different */
+ int board_type;
+};
+
+#define to_db1x_socket(x) container_of(x, struct db1x_pcmcia_sock, socket)
+
+/* DB/PB1200: check CPLD SIGSTATUS register bit 10/12 */
+static int db1200_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+ unsigned short sigstat;
+
+ sigstat = bcsr_read(BCSR_SIGSTAT);
+ return sigstat & 1 << (8 + 2 * sock->nr);
+}
+
+/* carddetect gpio: low-active */
+static int db1000_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+ return !gpio_get_value(irq_to_gpio(sock->insert_irq));
+}
+
+static int db1x_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+ switch (sock->board_type) {
+ case BOARD_TYPE_DB1200:
+ return db1200_card_inserted(sock);
+ default:
+ return db1000_card_inserted(sock);
+ }
+}
+
+/* STSCHG tends to bounce heavily when cards are inserted/ejected.
+ * To avoid this, the interrupt is normally disabled and only enabled
+ * after reset to a card has been de-asserted.
+ */
+static inline void set_stschg(struct db1x_pcmcia_sock *sock, int en)
+{
+ if (sock->stschg_irq != -1) {
+ if (en)
+ enable_irq(sock->stschg_irq);
+ else
+ disable_irq(sock->stschg_irq);
+ }
+}
+
+static irqreturn_t db1000_pcmcia_cdirq(int irq, void *data)
+{
+ struct db1x_pcmcia_sock *sock = data;
+
+ pcmcia_parse_events(&sock->socket, SS_DETECT);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t db1000_pcmcia_stschgirq(int irq, void *data)
+{
+ struct db1x_pcmcia_sock *sock = data;
+
+ pcmcia_parse_events(&sock->socket, SS_STSCHG);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data)
+{
+ struct db1x_pcmcia_sock *sock = data;
+
+ /* Db/Pb1200 have separate per-socket insertion and ejection
+ * interrupts which stay asserted as long as the card is
+ * inserted/missing. The one which caused us to be called
+ * needs to be disabled and the other one enabled.
+ */
+ if (irq == sock->insert_irq) {
+ disable_irq_nosync(sock->insert_irq);
+ enable_irq(sock->eject_irq);
+ } else {
+ disable_irq_nosync(sock->eject_irq);
+ enable_irq(sock->insert_irq);
+ }
+
+ pcmcia_parse_events(&sock->socket, SS_DETECT);
+
+ return IRQ_HANDLED;
+}
+
+static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
+{
+ int ret;
+ unsigned long flags;
+
+ if (sock->stschg_irq != -1) {
+ ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq,
+ 0, "pcmcia_stschg", sock);
+ if (ret)
+ return ret;
+ }
+
+ /* Db/Pb1200 have separate per-socket insertion and ejection
+ * interrupts, which should show edge behaviour but don't.
+ * So interrupts are disabled until both insertion and
+ * ejection handler have been registered and the currently
+ * active one disabled.
+ */
+ if (sock->board_type == BOARD_TYPE_DB1200) {
+ local_irq_save(flags);
+
+ ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
+ IRQF_DISABLED, "pcmcia_insert", sock);
+ if (ret)
+ goto out1;
+
+ ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq,
+ IRQF_DISABLED, "pcmcia_eject", sock);
+ if (ret) {
+ free_irq(sock->insert_irq, sock);
+ local_irq_restore(flags);
+ goto out1;
+ }
+
+ /* disable the currently active one */
+ if (db1200_card_inserted(sock))
+ disable_irq_nosync(sock->insert_irq);
+ else
+ disable_irq_nosync(sock->eject_irq);
+
+ local_irq_restore(flags);
+ } else {
+ /* all other (older) Db1x00 boards use a GPIO to show
+ * card detection status: use both-edge triggers.
+ */
+ set_irq_type(sock->insert_irq, IRQ_TYPE_EDGE_BOTH);
+ ret = request_irq(sock->insert_irq, db1000_pcmcia_cdirq,
+ 0, "pcmcia_carddetect", sock);
+
+ if (ret)
+ goto out1;
+ }
+
+ return 0; /* all done */
+
+out1:
+ if (sock->stschg_irq != -1)
+ free_irq(sock->stschg_irq, sock);
+
+ return ret;
+}
+
+static void db1x_pcmcia_free_irqs(struct db1x_pcmcia_sock *sock)
+{
+ if (sock->stschg_irq != -1)
+ free_irq(sock->stschg_irq, sock);
+
+ free_irq(sock->insert_irq, sock);
+ if (sock->eject_irq != -1)
+ free_irq(sock->eject_irq, sock);
+}
+
+/*
+ * configure a PCMCIA socket on the Db1x00 series of boards (and
+ * compatibles).
+ *
+ * 2 external registers are involved:
+ * pcmcia_status (offset 0x04): bits [0:1/2:3]: read card voltage id
+ * pcmcia_control(offset 0x10):
+ * bits[0:1] set vcc for card
+ * bits[2:3] set vpp for card
+ * bit 4: enable data buffers
+ * bit 7: reset# for card
+ * add 8 for second socket.
+ */
+static int db1x_pcmcia_configure(struct pcmcia_socket *skt,
+ struct socket_state_t *state)
+{
+ struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+ unsigned short cr_clr, cr_set;
+ unsigned int changed;
+ int v, p, ret;
+
+ /* card voltage setup */
+ cr_clr = (0xf << (sock->nr * 8)); /* clear voltage settings */
+ cr_set = 0;
+ v = p = ret = 0;
+
+ switch (state->Vcc) {
+ case 50:
+ ++v;
+ case 33:
+ ++v;
+ case 0:
+ break;
+ default:
+ printk(KERN_INFO "pcmcia%d unsupported Vcc %d\n",
+ sock->nr, state->Vcc);
+ }
+
+ switch (state->Vpp) {
+ case 12:
+ ++p;
+ case 33:
+ case 50:
+ ++p;
+ case 0:
+ break;
+ default:
+ printk(KERN_INFO "pcmcia%d unsupported Vpp %d\n",
+ sock->nr, state->Vpp);
+ }
+
+ /* sanity check: Vpp must be 0, 12, or Vcc */
+ if (((state->Vcc == 33) && (state->Vpp == 50)) ||
+ ((state->Vcc == 50) && (state->Vpp == 33))) {
+ printk(KERN_INFO "pcmcia%d bad Vcc/Vpp combo (%d %d)\n",
+ sock->nr, state->Vcc, state->Vpp);
+ v = p = 0;
+ ret = -EINVAL;
+ }
+
+ /* create new voltage code */
+ cr_set |= ((v << 2) | p) << (sock->nr * 8);
+
+ changed = state->flags ^ sock->old_flags;
+
+ if (changed & SS_RESET) {
+ if (state->flags & SS_RESET) {
+ set_stschg(sock, 0);
+ /* assert reset, disable io buffers */
+ cr_clr |= (1 << (7 + (sock->nr * 8)));
+ cr_clr |= (1 << (4 + (sock->nr * 8)));
+ } else {
+ /* de-assert reset, enable io buffers */
+ cr_set |= 1 << (7 + (sock->nr * 8));
+ cr_set |= 1 << (4 + (sock->nr * 8));
+ }
+ }
+
+ /* update PCMCIA configuration */
+ bcsr_mod(BCSR_PCMCIA, cr_clr, cr_set);
+
+ sock->old_flags = state->flags;
+
+ /* reset was taken away: give card time to initialize properly */
+ if ((changed & SS_RESET) && !(state->flags & SS_RESET)) {
+ msleep(500);
+ set_stschg(sock, 1);
+ }
+
+ return ret;
+}
+
+/* VCC bits at [3:2]/[11:10] */
+#define GET_VCC(cr, socknr) \
+ ((((cr) >> 2) >> ((socknr) * 8)) & 3)
+
+/* VS bits at [0:1]/[3:2] */
+#define GET_VS(sr, socknr) \
+ (((sr) >> (2 * (socknr))) & 3)
+
+/* reset bits at [7]/[15] */
+#define GET_RESET(cr, socknr) \
+ ((cr) & (1 << (7 + (8 * (socknr)))))
+
+static int db1x_pcmcia_get_status(struct pcmcia_socket *skt,
+ unsigned int *value)
+{
+ struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+ unsigned short cr, sr;
+ unsigned int status;
+
+ status = db1x_card_inserted(sock) ? SS_DETECT : 0;
+
+ cr = bcsr_read(BCSR_PCMCIA);
+ sr = bcsr_read(BCSR_STATUS);
+
+ /* PB1100/PB1500: voltage key bits are at [5:4] */
+ if (sock->board_type == BOARD_TYPE_PB1100)
+ sr >>= 4;
+
+ /* determine card type */
+ switch (GET_VS(sr, sock->nr)) {
+ case 0:
+ case 2:
+ status |= SS_3VCARD; /* 3V card */
+ case 3:
+ break; /* 5V card: set nothing */
+ default:
+ status |= SS_XVCARD; /* treated as unsupported in core */
+ }
+
+ /* if Vcc is not zero, we have applied power to a card */
+ status |= GET_VCC(cr, sock->nr) ? SS_POWERON : 0;
+
+ /* reset de-asserted? then we're ready */
+ status |= (GET_RESET(cr, sock->nr)) ? SS_READY : SS_RESET;
+
+ *value = status;
+
+ return 0;
+}
+
+static int db1x_pcmcia_sock_init(struct pcmcia_socket *skt)
+{
+ return 0;
+}
+
+static int db1x_pcmcia_sock_suspend(struct pcmcia_socket *skt)
+{
+ return 0;
+}
+
+static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt,
+ struct pccard_io_map *map)
+{
+ struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+
+ map->start = (u32)sock->virt_io;
+ map->stop = map->start + IO_MAP_SIZE;
+
+ return 0;
+}
+
+static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt,
+ struct pccard_mem_map *map)
+{
+ struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+
+ if (map->flags & MAP_ATTRIB)
+ map->static_start = sock->phys_attr + map->card_start;
+ else
+ map->static_start = sock->phys_mem + map->card_start;
+
+ return 0;
+}
+
+static struct pccard_operations db1x_pcmcia_operations = {
+ .init = db1x_pcmcia_sock_init,
+ .suspend = db1x_pcmcia_sock_suspend,
+ .get_status = db1x_pcmcia_get_status,
+ .set_socket = db1x_pcmcia_configure,
+ .set_io_map = au1x00_pcmcia_set_io_map,
+ .set_mem_map = au1x00_pcmcia_set_mem_map,
+};
+
+static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
+{
+ struct db1x_pcmcia_sock *sock;
+ struct resource *r;
+ int ret, bid;
+
+ sock = kzalloc(sizeof(struct db1x_pcmcia_sock), GFP_KERNEL);
+ if (!sock)
+ return -ENOMEM;
+
+ sock->nr = pdev->id;
+
+ bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+ switch (bid) {
+ case BCSR_WHOAMI_PB1500:
+ case BCSR_WHOAMI_PB1500R2:
+ case BCSR_WHOAMI_PB1100:
+ sock->board_type = BOARD_TYPE_PB1100;
+ break;
+ case BCSR_WHOAMI_DB1000 ... BCSR_WHOAMI_PB1550_SDR:
+ sock->board_type = BOARD_TYPE_DEFAULT;
+ break;
+ case BCSR_WHOAMI_PB1200 ... BCSR_WHOAMI_DB1200:
+ sock->board_type = BOARD_TYPE_DB1200;
+ break;
+ default:
+ printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid);
+ ret = -ENODEV;
+ goto out0;
+ };
+
+ /*
+ * gather resources necessary and optional nice-to-haves to
+ * operate a socket:
+ * This includes IRQs for Carddetection/ejection, the card
+ * itself and optional status change detection.
+ * Also, the memory areas covered by a socket. For these
+ * we require the 32bit "pseudo" addresses (see the au1000.h
+ * header for more information).
+ */
+
+ /* card: irq assigned to the card itself. */
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "card");
+ sock->card_irq = r ? r->start : 0;
+
+ /* insert: irq which triggers on card insertion/ejection */
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "insert");
+ sock->insert_irq = r ? r->start : -1;
+
+ /* stschg: irq which trigger on card status change (optional) */
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "stschg");
+ sock->stschg_irq = r ? r->start : -1;
+
+ /* eject: irq which triggers on ejection (DB1200/PB1200 only) */
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "eject");
+ sock->eject_irq = r ? r->start : -1;
+
+ ret = -ENODEV;
+
+ /*
+ * pseudo-attr: The 32bit address of the PCMCIA attribute space
+ * for this socket (usually the 36bit address shifted 4 to the
+ * right).
+ */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr");
+ if (!r) {
+ printk(KERN_ERR "pcmcia%d has no 'pseudo-attr' resource!\n",
+ sock->nr);
+ goto out0;
+ }
+ sock->phys_attr = r->start;
+
+ /*
+ * pseudo-mem: The 32bit address of the PCMCIA memory space for
+ * this socket (usually the 36bit address shifted 4 to the right)
+ */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem");
+ if (!r) {
+ printk(KERN_ERR "pcmcia%d has no 'pseudo-mem' resource!\n",
+ sock->nr);
+ goto out0;
+ }
+ sock->phys_mem = r->start;
+
+ /*
+ * pseudo-io: The 32bit address of the PCMCIA IO space for this
+ * socket (usually the 36bit address shifted 4 to the right).
+ */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io");
+ if (!r) {
+ printk(KERN_ERR "pcmcia%d has no 'pseudo-io' resource!\n",
+ sock->nr);
+ goto out0;
+ }
+ sock->phys_io = r->start;
+
+ /*
+ * PCMCIA client drivers use the inb/outb macros to access
+ * the IO registers. Since mips_io_port_base is added
+ * to the access address of the mips implementation of
+ * inb/outb, we need to subtract it here because we want
+ * to access the I/O or MEM address directly, without
+ * going through this "mips_io_port_base" mechanism.
+ */
+ sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) -
+ mips_io_port_base);
+
+ if (!sock->virt_io) {
+ printk(KERN_ERR "pcmcia%d: cannot remap IO area\n",
+ sock->nr);
+ ret = -ENOMEM;
+ goto out0;
+ }
+
+ sock->socket.ops = &db1x_pcmcia_operations;
+ sock->socket.owner = THIS_MODULE;
+ sock->socket.pci_irq = sock->card_irq;
+ sock->socket.features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+ sock->socket.map_size = MEM_MAP_SIZE;
+ sock->socket.io_offset = (unsigned long)sock->virt_io;
+ sock->socket.dev.parent = &pdev->dev;
+ sock->socket.resource_ops = &pccard_static_ops;
+
+ platform_set_drvdata(pdev, sock);
+
+ ret = db1x_pcmcia_setup_irqs(sock);
+ if (ret) {
+ printk(KERN_ERR "pcmcia%d cannot setup interrupts\n",
+ sock->nr);
+ goto out1;
+ }
+
+ set_stschg(sock, 0);
+
+ ret = pcmcia_register_socket(&sock->socket);
+ if (ret) {
+ printk(KERN_ERR "pcmcia%d failed to register\n", sock->nr);
+ goto out2;
+ }
+
+ printk(KERN_INFO "Alchemy Db/Pb1xxx pcmcia%d @ io/attr/mem %09llx"
+ "(%p) %09llx %09llx card/insert/stschg/eject irqs @ %d "
+ "%d %d %d\n", sock->nr, sock->phys_io, sock->virt_io,
+ sock->phys_attr, sock->phys_mem, sock->card_irq,
+ sock->insert_irq, sock->stschg_irq, sock->eject_irq);
+
+ return 0;
+
+out2:
+ db1x_pcmcia_free_irqs(sock);
+out1:
+ iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+out0:
+ kfree(sock);
+ return ret;
+}
+
+static int __devexit db1x_pcmcia_socket_remove(struct platform_device *pdev)
+{
+ struct db1x_pcmcia_sock *sock = platform_get_drvdata(pdev);
+
+ db1x_pcmcia_free_irqs(sock);
+ pcmcia_unregister_socket(&sock->socket);
+ iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+ kfree(sock);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int db1x_pcmcia_suspend(struct device *dev)
+{
+ return pcmcia_socket_dev_suspend(dev);
+}
+
+static int db1x_pcmcia_resume(struct device *dev)
+{
+ return pcmcia_socket_dev_resume(dev);
+}
+
+static struct dev_pm_ops db1x_pcmcia_pmops = {
+ .resume = db1x_pcmcia_resume,
+ .suspend = db1x_pcmcia_suspend,
+ .thaw = db1x_pcmcia_resume,
+ .freeze = db1x_pcmcia_suspend,
+};
+
+#define DB1XXX_SS_PMOPS &db1x_pcmcia_pmops
+
+#else
+
+#define DB1XXX_SS_PMOPS NULL
+
+#endif
+
+static struct platform_driver db1x_pcmcia_socket_driver = {
+ .driver = {
+ .name = "db1xxx_pcmcia",
+ .owner = THIS_MODULE,
+ .pm = DB1XXX_SS_PMOPS
+ },
+ .probe = db1x_pcmcia_socket_probe,
+ .remove = __devexit_p(db1x_pcmcia_socket_remove),
+};
+
+int __init db1x_pcmcia_socket_load(void)
+{
+ return platform_driver_register(&db1x_pcmcia_socket_driver);
+}
+
+void __exit db1x_pcmcia_socket_unload(void)
+{
+ platform_driver_unregister(&db1x_pcmcia_socket_driver);
+}
+
+module_init(db1x_pcmcia_socket_load);
+module_exit(db1x_pcmcia_socket_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCMCIA Socket Services for Alchemy Db/Pb1x00 boards");
+MODULE_AUTHOR("Manuel Lauss");
--- /dev/null
+/*
+ * PCMCIA socket code for the MyCable XXS1500 system.
+ *
+ * Copyright (c) 2009 Manuel Lauss <manuel.lauss@gmail.com>
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/resource.h>
+#include <linux/spinlock.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/ss.h>
+#include <pcmcia/cistpl.h>
+
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define MEM_MAP_SIZE 0x400000
+#define IO_MAP_SIZE 0x1000
+
+
+/*
+ * 3.3V cards only; all interfacing is done via gpios:
+ *
+ * 0/1: carddetect (00 = card present, xx = huh)
+ * 4: card irq
+ * 204: reset (high-act)
+ * 205: buffer enable (low-act)
+ * 208/209: card voltage key (00,01,10,11)
+ * 210: battwarn
+ * 211: batdead
+ * 214: power (low-act)
+ */
+#define GPIO_CDA 0
+#define GPIO_CDB 1
+#define GPIO_CARDIRQ 4
+#define GPIO_RESET 204
+#define GPIO_OUTEN 205
+#define GPIO_VSL 208
+#define GPIO_VSH 209
+#define GPIO_BATTDEAD 210
+#define GPIO_BATTWARN 211
+#define GPIO_POWER 214
+
+struct xxs1500_pcmcia_sock {
+ struct pcmcia_socket socket;
+ void *virt_io;
+
+ phys_addr_t phys_io;
+ phys_addr_t phys_attr;
+ phys_addr_t phys_mem;
+
+ /* previous flags for set_socket() */
+ unsigned int old_flags;
+};
+
+#define to_xxs_socket(x) container_of(x, struct xxs1500_pcmcia_sock, socket)
+
+static irqreturn_t cdirq(int irq, void *data)
+{
+ struct xxs1500_pcmcia_sock *sock = data;
+
+ pcmcia_parse_events(&sock->socket, SS_DETECT);
+
+ return IRQ_HANDLED;
+}
+
+static int xxs1500_pcmcia_configure(struct pcmcia_socket *skt,
+ struct socket_state_t *state)
+{
+ struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
+ unsigned int changed;
+
+ /* power control */
+ switch (state->Vcc) {
+ case 0:
+ gpio_set_value(GPIO_POWER, 1); /* power off */
+ break;
+ case 33:
+ gpio_set_value(GPIO_POWER, 0); /* power on */
+ break;
+ case 50:
+ default:
+ return -EINVAL;
+ }
+
+ changed = state->flags ^ sock->old_flags;
+
+ if (changed & SS_RESET) {
+ if (state->flags & SS_RESET) {
+ gpio_set_value(GPIO_RESET, 1); /* assert reset */
+ gpio_set_value(GPIO_OUTEN, 1); /* buffers off */
+ } else {
+ gpio_set_value(GPIO_RESET, 0); /* deassert reset */
+ gpio_set_value(GPIO_OUTEN, 0); /* buffers on */
+ msleep(500);
+ }
+ }
+
+ sock->old_flags = state->flags;
+
+ return 0;
+}
+
+static int xxs1500_pcmcia_get_status(struct pcmcia_socket *skt,
+ unsigned int *value)
+{
+ unsigned int status;
+ int i;
+
+ status = 0;
+
+ /* check carddetects: GPIO[0:1] must both be low */
+ if (!gpio_get_value(GPIO_CDA) && !gpio_get_value(GPIO_CDB))
+ status |= SS_DETECT;
+
+ /* determine card voltage: GPIO[208:209] binary value */
+ i = (!!gpio_get_value(GPIO_VSL)) | ((!!gpio_get_value(GPIO_VSH)) << 1);
+
+ switch (i) {
+ case 0:
+ case 1:
+ case 2:
+ status |= SS_3VCARD; /* 3V card */
+ break;
+ case 3: /* 5V card, unsupported */
+ default:
+ status |= SS_XVCARD; /* treated as unsupported in core */
+ }
+
+ /* GPIO214: low active power switch */
+ status |= gpio_get_value(GPIO_POWER) ? 0 : SS_POWERON;
+
+ /* GPIO204: high-active reset line */
+ status |= gpio_get_value(GPIO_RESET) ? SS_RESET : SS_READY;
+
+ /* other stuff */
+ status |= gpio_get_value(GPIO_BATTDEAD) ? 0 : SS_BATDEAD;
+ status |= gpio_get_value(GPIO_BATTWARN) ? 0 : SS_BATWARN;
+
+ *value = status;
+
+ return 0;
+}
+
+static int xxs1500_pcmcia_sock_init(struct pcmcia_socket *skt)
+{
+ gpio_direction_input(GPIO_CDA);
+ gpio_direction_input(GPIO_CDB);
+ gpio_direction_input(GPIO_VSL);
+ gpio_direction_input(GPIO_VSH);
+ gpio_direction_input(GPIO_BATTDEAD);
+ gpio_direction_input(GPIO_BATTWARN);
+ gpio_direction_output(GPIO_RESET, 1); /* assert reset */
+ gpio_direction_output(GPIO_OUTEN, 1); /* disable buffers */
+ gpio_direction_output(GPIO_POWER, 1); /* power off */
+
+ return 0;
+}
+
+static int xxs1500_pcmcia_sock_suspend(struct pcmcia_socket *skt)
+{
+ return 0;
+}
+
+static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt,
+ struct pccard_io_map *map)
+{
+ struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
+
+ map->start = (u32)sock->virt_io;
+ map->stop = map->start + IO_MAP_SIZE;
+
+ return 0;
+}
+
+static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt,
+ struct pccard_mem_map *map)
+{
+ struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
+
+ if (map->flags & MAP_ATTRIB)
+ map->static_start = sock->phys_attr + map->card_start;
+ else
+ map->static_start = sock->phys_mem + map->card_start;
+
+ return 0;
+}
+
+static struct pccard_operations xxs1500_pcmcia_operations = {
+ .init = xxs1500_pcmcia_sock_init,
+ .suspend = xxs1500_pcmcia_sock_suspend,
+ .get_status = xxs1500_pcmcia_get_status,
+ .set_socket = xxs1500_pcmcia_configure,
+ .set_io_map = au1x00_pcmcia_set_io_map,
+ .set_mem_map = au1x00_pcmcia_set_mem_map,
+};
+
+static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev)
+{
+ struct xxs1500_pcmcia_sock *sock;
+ struct resource *r;
+ int ret, irq;
+
+ sock = kzalloc(sizeof(struct xxs1500_pcmcia_sock), GFP_KERNEL);
+ if (!sock)
+ return -ENOMEM;
+
+ ret = -ENODEV;
+
+ /*
+ * pseudo-attr: The 32bit address of the PCMCIA attribute space
+ * for this socket (usually the 36bit address shifted 4 to the
+ * right).
+ */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr");
+ if (!r) {
+ dev_err(&pdev->dev, "missing 'pcmcia-attr' resource!\n");
+ goto out0;
+ }
+ sock->phys_attr = r->start;
+
+ /*
+ * pseudo-mem: The 32bit address of the PCMCIA memory space for
+ * this socket (usually the 36bit address shifted 4 to the right)
+ */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem");
+ if (!r) {
+ dev_err(&pdev->dev, "missing 'pcmcia-mem' resource!\n");
+ goto out0;
+ }
+ sock->phys_mem = r->start;
+
+ /*
+ * pseudo-io: The 32bit address of the PCMCIA IO space for this
+ * socket (usually the 36bit address shifted 4 to the right).
+ */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io");
+ if (!r) {
+ dev_err(&pdev->dev, "missing 'pcmcia-io' resource!\n");
+ goto out0;
+ }
+ sock->phys_io = r->start;
+
+
+ /*
+ * PCMCIA client drivers use the inb/outb macros to access
+ * the IO registers. Since mips_io_port_base is added
+ * to the access address of the mips implementation of
+ * inb/outb, we need to subtract it here because we want
+ * to access the I/O or MEM address directly, without
+ * going through this "mips_io_port_base" mechanism.
+ */
+ sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) -
+ mips_io_port_base);
+
+ if (!sock->virt_io) {
+ dev_err(&pdev->dev, "cannot remap IO area\n");
+ ret = -ENOMEM;
+ goto out0;
+ }
+
+ sock->socket.ops = &xxs1500_pcmcia_operations;
+ sock->socket.owner = THIS_MODULE;
+ sock->socket.pci_irq = gpio_to_irq(GPIO_CARDIRQ);
+ sock->socket.features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+ sock->socket.map_size = MEM_MAP_SIZE;
+ sock->socket.io_offset = (unsigned long)sock->virt_io;
+ sock->socket.dev.parent = &pdev->dev;
+ sock->socket.resource_ops = &pccard_static_ops;
+
+ platform_set_drvdata(pdev, sock);
+
+ /* setup carddetect irq: use one of the 2 GPIOs as an
+ * edge detector.
+ */
+ irq = gpio_to_irq(GPIO_CDA);
+ set_irq_type(irq, IRQ_TYPE_EDGE_BOTH);
+ ret = request_irq(irq, cdirq, 0, "pcmcia_carddetect", sock);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot setup cd irq\n");
+ goto out1;
+ }
+
+ ret = pcmcia_register_socket(&sock->socket);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register\n");
+ goto out2;
+ }
+
+ printk(KERN_INFO "MyCable XXS1500 PCMCIA socket services\n");
+
+ return 0;
+
+out2:
+ free_irq(gpio_to_irq(GPIO_CDA), sock);
+out1:
+ iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+out0:
+ kfree(sock);
+ return ret;
+}
+
+static int __devexit xxs1500_pcmcia_remove(struct platform_device *pdev)
+{
+ struct xxs1500_pcmcia_sock *sock = platform_get_drvdata(pdev);
+
+ pcmcia_unregister_socket(&sock->socket);
+ free_irq(gpio_to_irq(GPIO_CDA), sock);
+ iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+ kfree(sock);
+
+ return 0;
+}
+
+static struct platform_driver xxs1500_pcmcia_socket_driver = {
+ .driver = {
+ .name = "xxs1500_pcmcia",
+ .owner = THIS_MODULE,
+ },
+ .probe = xxs1500_pcmcia_probe,
+ .remove = __devexit_p(xxs1500_pcmcia_remove),
+};
+
+int __init xxs1500_pcmcia_socket_load(void)
+{
+ return platform_driver_register(&xxs1500_pcmcia_socket_driver);
+}
+
+void __exit xxs1500_pcmcia_socket_unload(void)
+{
+ platform_driver_unregister(&xxs1500_pcmcia_socket_driver);
+}
+
+module_init(xxs1500_pcmcia_socket_load);
+module_exit(xxs1500_pcmcia_socket_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCMCIA Socket Services for MyCable XXS1500 systems");
+MODULE_AUTHOR("Manuel Lauss");
}
#endif
-#ifdef CONFIG_SERIAL_8250_AU1X00
- /* if access method is AU, it is a 16550 with a quirk */
- if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
- up->bugs |= UART_BUG_NOMSR;
-#endif
-
serial_outp(up, UART_LCR, save_lcr);
if (up->capabilities != uart_config[up->port.type].flags) {
static unsigned int serial8250_port_size(struct uart_8250_port *pt)
{
if (pt->port.iotype == UPIO_AU)
- return 0x100000;
+ return 0x1000;
#ifdef CONFIG_ARCH_OMAP
if (is_omap_port(pt))
return 0x16 << pt->port.regshift;
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+ /* if access method is AU, it is a 16550 with a quirk */
+ if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
+ up->bugs |= UART_BUG_NOMSR;
+#endif
+
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
autoconfig_irq(up);
}
/* put buffers on the ring */
- res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, hw->rx, t->len);
+ res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, virt_to_phys(hw->rx),
+ t->len, DDMA_FLAGS_IE);
if (!res)
dev_err(hw->dev, "rx dma put dest error\n");
- res = au1xxx_dbdma_put_source(hw->dma_tx_ch, (void *)hw->tx, t->len);
+ res = au1xxx_dbdma_put_source(hw->dma_tx_ch, virt_to_phys(hw->tx),
+ t->len, DDMA_FLAGS_IE);
if (!res)
dev_err(hw->dev, "tx dma put source error\n");
octeon-ethernet-objs := ethernet.o
octeon-ethernet-objs += ethernet-mdio.o
octeon-ethernet-objs += ethernet-mem.o
-octeon-ethernet-objs += ethernet-proc.o
octeon-ethernet-objs += ethernet-rgmii.o
octeon-ethernet-objs += ethernet-rx.o
octeon-ethernet-objs += ethernet-sgmii.o
* Tells the driver to populate the packet buffers with kernel skbuffs.
* This allows the driver to receive packets without copying them. It also
* means that 32bit userspace can't access the packet buffers.
- * USE_32BIT_SHARED
- * This define tells the driver to allocate memory for buffers from the
- * 32bit sahred region instead of the kernel memory space.
* USE_HW_TCPUDP_CHECKSUM
* Controls if the Octeon TCP/UDP checksum engine is used for packet
* output. If this is zero, the kernel will perform the checksum in
* software.
- * USE_MULTICORE_RECEIVE
- * Process receive interrupts on multiple cores. This spreads the network
- * load across the first 8 processors. If ths is zero, only one core
- * processes incomming packets.
* USE_ASYNC_IOBDMA
* Use asynchronous IO access to hardware. This uses Octeon's asynchronous
* IOBDMAs to issue IO accesses without stalling. Set this to zero
#define CONFIG_CAVIUM_RESERVE32 0
#endif
-#if CONFIG_CAVIUM_RESERVE32
-#define USE_32BIT_SHARED 1
-#define USE_SKBUFFS_IN_HW 0
-#define REUSE_SKBUFFS_WITHOUT_FREE 0
-#else
-#define USE_32BIT_SHARED 0
#define USE_SKBUFFS_IN_HW 1
#ifdef CONFIG_NETFILTER
#define REUSE_SKBUFFS_WITHOUT_FREE 0
#else
#define REUSE_SKBUFFS_WITHOUT_FREE 1
#endif
-#endif
-
-/* Max interrupts per second per core */
-#define INTERRUPT_LIMIT 10000
-/* Don't limit the number of interrupts */
-/*#define INTERRUPT_LIMIT 0 */
#define USE_HW_TCPUDP_CHECKSUM 1
-#define USE_MULTICORE_RECEIVE 1
-
/* Enable Random Early Dropping under load */
#define USE_RED 1
#define USE_ASYNC_IOBDMA (CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0)
/* Use this to not have FPA frees control L2 */
/*#define DONT_WRITEBACK(x) 0 */
-/* Maximum number of packets to process per interrupt. */
-#define MAX_RX_PACKETS 120
/* Maximum number of SKBs to try to free per xmit packet. */
-#define MAX_SKB_TO_FREE 10
#define MAX_OUT_QUEUE_DEPTH 1000
-#ifndef CONFIG_SMP
-#undef USE_MULTICORE_RECEIVE
-#define USE_MULTICORE_RECEIVE 0
-#endif
-
-#define IP_PROTOCOL_TCP 6
-#define IP_PROTOCOL_UDP 0x11
+#define FAU_TOTAL_TX_TO_CLEAN (CVMX_FAU_REG_END - sizeof(uint32_t))
+#define FAU_NUM_PACKET_BUFFERS_TO_FREE (FAU_TOTAL_TX_TO_CLEAN - sizeof(uint32_t))
-#define FAU_NUM_PACKET_BUFFERS_TO_FREE (CVMX_FAU_REG_END - sizeof(uint32_t))
#define TOTAL_NUMBER_OF_PORTS (CVMX_PIP_NUM_INPUT_PORTS+1)
};
/**
- * IOCTL support for PHY control
- *
+ * cvm_oct_ioctl - IOCTL support for PHY control
* @dev: Device to change
* @rq: the request
* @cmd: the command
+ *
* Returns Zero on success
*/
int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
/**
- * Setup the PHY
+ * cvm_oct_phy_setup_device - setup the PHY
*
* @dev: Device to setup
*
#include <linux/ip.h>
#include <linux/string.h>
#include <linux/ethtool.h>
-#include <linux/mii.h>
#include <linux/seq_file.h>
#include <linux/proc_fs.h>
#include <net/dst.h>
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
- * Copyright (c) 2003-2007 Cavium Networks
+ * Copyright (c) 2003-2010 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
-#include <linux/mii.h>
-#include <net/dst.h>
#include <asm/octeon/octeon.h>
#include "cvmx-fpa.h"
/**
- * Fill the supplied hardware pool with skbuffs
- *
+ * cvm_oct_fill_hw_skbuff - fill the supplied hardware pool with skbuffs
* @pool: Pool to allocate an skbuff for
* @size: Size of the buffer needed for the pool
* @elements: Number of buffers to allocate
+ *
+ * Returns the actual number of buffers allocated.
*/
static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements)
{
int freed = elements;
while (freed) {
- struct sk_buff *skb = dev_alloc_skb(size + 128);
+ struct sk_buff *skb = dev_alloc_skb(size + 256);
if (unlikely(skb == NULL)) {
pr_warning
("Failed to allocate skb for hardware pool %d\n",
break;
}
- skb_reserve(skb, 128 - (((unsigned long)skb->data) & 0x7f));
+ skb_reserve(skb, 256 - (((unsigned long)skb->data) & 0x7f));
*(struct sk_buff **)(skb->data - sizeof(void *)) = skb;
cvmx_fpa_free(skb->data, pool, DONT_WRITEBACK(size / 128));
freed--;
}
/**
- * Free the supplied hardware pool of skbuffs
- *
+ * cvm_oct_free_hw_skbuff- free hardware pool skbuffs
* @pool: Pool to allocate an skbuff for
* @size: Size of the buffer needed for the pool
* @elements: Number of buffers to allocate
}
/**
- * This function fills a hardware pool with memory. Depending
- * on the config defines, this memory might come from the
- * kernel or global 32bit memory allocated with
- * cvmx_bootmem_alloc.
- *
+ * cvm_oct_fill_hw_memory - fill a hardware pool with memory.
* @pool: Pool to populate
* @size: Size of each buffer in the pool
* @elements: Number of buffers to allocate
+ *
+ * Returns the actual number of buffers allocated.
*/
static int cvm_oct_fill_hw_memory(int pool, int size, int elements)
{
char *memory;
+ char *fpa;
int freed = elements;
- if (USE_32BIT_SHARED) {
- extern uint64_t octeon_reserve32_memory;
-
- memory =
- cvmx_bootmem_alloc_range(elements * size, 128,
- octeon_reserve32_memory,
- octeon_reserve32_memory +
- (CONFIG_CAVIUM_RESERVE32 << 20) -
- 1);
- if (memory == NULL)
- panic("Unable to allocate %u bytes for FPA pool %d\n",
- elements * size, pool);
-
- pr_notice("Memory range %p - %p reserved for "
- "hardware\n", memory,
- memory + elements * size - 1);
-
- while (freed) {
- cvmx_fpa_free(memory, pool, 0);
- memory += size;
- freed--;
- }
- } else {
- while (freed) {
- /* We need to force alignment to 128 bytes here */
- memory = kmalloc(size + 127, GFP_ATOMIC);
- if (unlikely(memory == NULL)) {
- pr_warning("Unable to allocate %u bytes for "
- "FPA pool %d\n",
- elements * size, pool);
- break;
- }
- memory = (char *)(((unsigned long)memory + 127) & -128);
- cvmx_fpa_free(memory, pool, 0);
- freed--;
+ while (freed) {
+ /*
+ * FPA memory must be 128 byte aligned. Since we are
+ * aligning we need to save the original pointer so we
+ * can feed it to kfree when the memory is returned to
+ * the kernel.
+ *
+ * We allocate an extra 256 bytes to allow for
+ * alignment and space for the original pointer saved
+ * just before the block.
+ */
+ memory = kmalloc(size + 256, GFP_ATOMIC);
+ if (unlikely(memory == NULL)) {
+ pr_warning("Unable to allocate %u bytes for FPA pool %d\n",
+ elements * size, pool);
+ break;
}
+ fpa = (char *)(((unsigned long)memory + 256) & ~0x7fUL);
+ *((char **)fpa - 1) = memory;
+ cvmx_fpa_free(fpa, pool, 0);
+ freed--;
}
return elements - freed;
}
/**
- * Free memory previously allocated with cvm_oct_fill_hw_memory
- *
+ * cvm_oct_free_hw_memory - Free memory allocated by cvm_oct_fill_hw_memory
* @pool: FPA pool to free
* @size: Size of each buffer in the pool
* @elements: Number of buffers that should be in the pool
*/
static void cvm_oct_free_hw_memory(int pool, int size, int elements)
{
- if (USE_32BIT_SHARED) {
- pr_warning("Warning: 32 shared memory is not freeable\n");
- } else {
- char *memory;
- do {
- memory = cvmx_fpa_alloc(pool);
- if (memory) {
- elements--;
- kfree(phys_to_virt(cvmx_ptr_to_phys(memory)));
- }
- } while (memory);
+ char *memory;
+ char *fpa;
+ do {
+ fpa = cvmx_fpa_alloc(pool);
+ if (fpa) {
+ elements--;
+ fpa = (char *)phys_to_virt(cvmx_ptr_to_phys(fpa));
+ memory = *((char **)fpa - 1);
+ kfree(memory);
+ }
+ } while (fpa);
- if (elements < 0)
- pr_warning("Freeing of pool %u had too many "
- "buffers (%d)\n",
- pool, elements);
- else if (elements > 0)
- pr_warning("Warning: Freeing of pool %u is "
- "missing %d buffers\n",
- pool, elements);
- }
+ if (elements < 0)
+ pr_warning("Freeing of pool %u had too many buffers (%d)\n",
+ pool, elements);
+ else if (elements > 0)
+ pr_warning("Warning: Freeing of pool %u is missing %d buffers\n",
+ pool, elements);
}
int cvm_oct_mem_fill_fpa(int pool, int size, int elements)
{
int freed;
- if (USE_SKBUFFS_IN_HW)
+ if (USE_SKBUFFS_IN_HW && pool == CVMX_FPA_PACKET_POOL)
freed = cvm_oct_fill_hw_skbuff(pool, size, elements);
else
freed = cvm_oct_fill_hw_memory(pool, size, elements);
void cvm_oct_mem_empty_fpa(int pool, int size, int elements)
{
- if (USE_SKBUFFS_IN_HW)
+ if (USE_SKBUFFS_IN_HW && pool == CVMX_FPA_PACKET_POOL)
cvm_oct_free_hw_skbuff(pool, size, elements);
else
cvm_oct_free_hw_memory(pool, size, elements);
+++ /dev/null
-/**********************************************************************
- * Author: Cavium Networks
- *
- * Contact: support@caviumnetworks.com
- * This file is part of the OCTEON SDK
- *
- * Copyright (c) 2003-2007 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful, but
- * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
- * NONINFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this file; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * or visit http://www.gnu.org/licenses/.
- *
- * This file may also be available under a different license from Cavium.
- * Contact Cavium Networks for more information
-**********************************************************************/
-#include <linux/kernel.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
-#include <net/dst.h>
-
-#include <asm/octeon/octeon.h>
-
-#include "octeon-ethernet.h"
-#include "ethernet-defines.h"
-
-#include "cvmx-helper.h"
-#include "cvmx-pip.h"
-
-/**
- * User is reading /proc/octeon_ethernet_stats
- *
- * @m:
- * @v:
- * Returns
- */
-static int cvm_oct_stats_show(struct seq_file *m, void *v)
-{
- struct octeon_ethernet *priv;
- int port;
-
- for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) {
-
- if (cvm_oct_device[port]) {
- priv = netdev_priv(cvm_oct_device[port]);
-
- seq_printf(m, "\nOcteon Port %d (%s)\n", port,
- cvm_oct_device[port]->name);
- seq_printf(m,
- "rx_packets: %12lu\t"
- "tx_packets: %12lu\n",
- priv->stats.rx_packets,
- priv->stats.tx_packets);
- seq_printf(m,
- "rx_bytes: %12lu\t"
- "tx_bytes: %12lu\n",
- priv->stats.rx_bytes, priv->stats.tx_bytes);
- seq_printf(m,
- "rx_errors: %12lu\t"
- "tx_errors: %12lu\n",
- priv->stats.rx_errors,
- priv->stats.tx_errors);
- seq_printf(m,
- "rx_dropped: %12lu\t"
- "tx_dropped: %12lu\n",
- priv->stats.rx_dropped,
- priv->stats.tx_dropped);
- seq_printf(m,
- "rx_length_errors: %12lu\t"
- "tx_aborted_errors: %12lu\n",
- priv->stats.rx_length_errors,
- priv->stats.tx_aborted_errors);
- seq_printf(m,
- "rx_over_errors: %12lu\t"
- "tx_carrier_errors: %12lu\n",
- priv->stats.rx_over_errors,
- priv->stats.tx_carrier_errors);
- seq_printf(m,
- "rx_crc_errors: %12lu\t"
- "tx_fifo_errors: %12lu\n",
- priv->stats.rx_crc_errors,
- priv->stats.tx_fifo_errors);
- seq_printf(m,
- "rx_frame_errors: %12lu\t"
- "tx_heartbeat_errors: %12lu\n",
- priv->stats.rx_frame_errors,
- priv->stats.tx_heartbeat_errors);
- seq_printf(m,
- "rx_fifo_errors: %12lu\t"
- "tx_window_errors: %12lu\n",
- priv->stats.rx_fifo_errors,
- priv->stats.tx_window_errors);
- seq_printf(m,
- "rx_missed_errors: %12lu\t"
- "multicast: %12lu\n",
- priv->stats.rx_missed_errors,
- priv->stats.multicast);
- }
- }
-
- return 0;
-}
-
-/**
- * /proc/octeon_ethernet_stats was openned. Use the single_open iterator
- *
- * @inode:
- * @file:
- * Returns
- */
-static int cvm_oct_stats_open(struct inode *inode, struct file *file)
-{
- return single_open(file, cvm_oct_stats_show, NULL);
-}
-
-static const struct file_operations cvm_oct_stats_operations = {
- .open = cvm_oct_stats_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-void cvm_oct_proc_initialize(void)
-{
- struct proc_dir_entry *entry =
- create_proc_entry("octeon_ethernet_stats", 0, NULL);
- if (entry)
- entry->proc_fops = &cvm_oct_stats_operations;
-}
-
-void cvm_oct_proc_shutdown(void)
-{
- remove_proc_entry("octeon_ethernet_stats", NULL);
-}
+++ /dev/null
-/*********************************************************************
- * Author: Cavium Networks
- *
- * Contact: support@caviumnetworks.com
- * This file is part of the OCTEON SDK
- *
- * Copyright (c) 2003-2007 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful, but
- * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
- * NONINFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this file; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * or visit http://www.gnu.org/licenses/.
- *
- * This file may also be available under a different license from Cavium.
- * Contact Cavium Networks for more information
-*********************************************************************/
-
-void cvm_oct_proc_initialize(void);
-void cvm_oct_proc_shutdown(void);
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
-#include <linux/mii.h>
+#include <linux/phy.h>
#include <net/dst.h>
#include <asm/octeon/octeon.h>
static void cvm_oct_rgmii_poll(struct net_device *dev)
{
struct octeon_ethernet *priv = netdev_priv(dev);
- unsigned long flags;
+ unsigned long flags = 0;
cvmx_helper_link_info_t link_info;
+ int use_global_register_lock = (priv->phydev == NULL);
- /*
- * Take the global register lock since we are going to touch
- * registers that affect more than one port.
- */
- spin_lock_irqsave(&global_register_lock, flags);
+ BUG_ON(in_interrupt());
+ if (use_global_register_lock) {
+ /*
+ * Take the global register lock since we are going to
+ * touch registers that affect more than one port.
+ */
+ spin_lock_irqsave(&global_register_lock, flags);
+ } else {
+ mutex_lock(&priv->phydev->bus->mdio_lock);
+ }
link_info = cvmx_helper_link_get(priv->port);
if (link_info.u64 == priv->link_info) {
dev->name);
}
}
- spin_unlock_irqrestore(&global_register_lock, flags);
+
+ if (use_global_register_lock)
+ spin_unlock_irqrestore(&global_register_lock, flags);
+ else
+ mutex_unlock(&priv->phydev->bus->mdio_lock);
return;
}
link_info = cvmx_helper_link_autoconf(priv->port);
priv->link_info = link_info.u64;
}
- spin_unlock_irqrestore(&global_register_lock, flags);
+
+ if (use_global_register_lock)
+ spin_unlock_irqrestore(&global_register_lock, flags);
+ else {
+ mutex_unlock(&priv->phydev->bus->mdio_lock);
+ }
if (priv->phydev == NULL) {
/* Tell core. */
struct net_device *dev =
cvm_oct_device[cvmx_helper_get_ipd_port
(interface, index)];
- if (dev)
- cvm_oct_rgmii_poll(dev);
+ struct octeon_ethernet *priv = netdev_priv(dev);
+
+ if (dev && !atomic_read(&cvm_oct_poll_queue_stopping))
+ queue_work(cvm_oct_poll_queue, &priv->port_work);
+
gmx_rx_int_reg.u64 = 0;
gmx_rx_int_reg.s.phy_dupx = 1;
gmx_rx_int_reg.s.phy_link = 1;
struct net_device *dev =
cvm_oct_device[cvmx_helper_get_ipd_port
(interface, index)];
- if (dev)
- cvm_oct_rgmii_poll(dev);
+ struct octeon_ethernet *priv = netdev_priv(dev);
+
+ if (dev && !atomic_read(&cvm_oct_poll_queue_stopping))
+ queue_work(cvm_oct_poll_queue, &priv->port_work);
+
gmx_rx_int_reg.u64 = 0;
gmx_rx_int_reg.s.phy_dupx = 1;
gmx_rx_int_reg.s.phy_link = 1;
return 0;
}
+static void cvm_oct_rgmii_immediate_poll(struct work_struct *work)
+{
+ struct octeon_ethernet *priv = container_of(work, struct octeon_ethernet, port_work);
+ cvm_oct_rgmii_poll(cvm_oct_device[priv->port]);
+}
+
int cvm_oct_rgmii_init(struct net_device *dev)
{
struct octeon_ethernet *priv = netdev_priv(dev);
cvm_oct_common_init(dev);
dev->netdev_ops->ndo_stop(dev);
-
+ INIT_WORK(&priv->port_work, cvm_oct_rgmii_immediate_poll);
/*
* Due to GMX errata in CN3XXX series chips, it is necessary
* to take the link down immediately when the PHY changes
number_rgmii_ports--;
if (number_rgmii_ports == 0)
free_irq(OCTEON_IRQ_RML, &number_rgmii_ports);
+ cancel_work_sync(&priv->port_work);
}
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
- * Copyright (c) 2003-2007 Cavium Networks
+ * Copyright (c) 2003-2010 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/cache.h>
+#include <linux/cpumask.h>
#include <linux/netdevice.h>
#include <linux/init.h>
#include <linux/etherdevice.h>
#include <linux/ip.h>
#include <linux/string.h>
#include <linux/prefetch.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
+#include <linux/smp.h>
#include <net/dst.h>
#ifdef CONFIG_XFRM
#include <linux/xfrm.h>
#include <asm/octeon/octeon.h>
#include "ethernet-defines.h"
-#include "octeon-ethernet.h"
#include "ethernet-mem.h"
+#include "ethernet-rx.h"
+#include "octeon-ethernet.h"
#include "ethernet-util.h"
#include "cvmx-helper.h"
#include "cvmx-gmxx-defs.h"
-struct cvm_tasklet_wrapper {
- struct tasklet_struct t;
-};
+struct cvm_napi_wrapper {
+ struct napi_struct napi;
+} ____cacheline_aligned_in_smp;
-/*
- * Aligning the tasklet_struct on cachline boundries seems to decrease
- * throughput even though in theory it would reduce contantion on the
- * cache lines containing the locks.
- */
+static struct cvm_napi_wrapper cvm_oct_napi[NR_CPUS] __cacheline_aligned_in_smp;
-static struct cvm_tasklet_wrapper cvm_oct_tasklet[NR_CPUS];
+struct cvm_oct_core_state {
+ int baseline_cores;
+ /*
+ * The number of additional cores that could be processing
+ * input packtes.
+ */
+ atomic_t available_cores;
+ cpumask_t cpu_state;
+} ____cacheline_aligned_in_smp;
-/**
- * Interrupt handler. The interrupt occurs whenever the POW
- * transitions from 0->1 packets in our group.
- *
- * @cpl:
- * @dev_id:
- * @regs:
- * Returns
- */
-irqreturn_t cvm_oct_do_interrupt(int cpl, void *dev_id)
+static struct cvm_oct_core_state core_state __cacheline_aligned_in_smp;
+
+static void cvm_oct_enable_napi(void *_)
{
- /* Acknowledge the interrupt */
- if (INTERRUPT_LIMIT)
- cvmx_write_csr(CVMX_POW_WQ_INT, 1 << pow_receive_group);
- else
- cvmx_write_csr(CVMX_POW_WQ_INT, 0x10001 << pow_receive_group);
- preempt_disable();
- tasklet_schedule(&cvm_oct_tasklet[smp_processor_id()].t);
- preempt_enable();
- return IRQ_HANDLED;
+ int cpu = smp_processor_id();
+ napi_schedule(&cvm_oct_napi[cpu].napi);
+}
+
+static void cvm_oct_enable_one_cpu(void)
+{
+ int v;
+ int cpu;
+
+ /* Check to see if more CPUs are available for receive processing... */
+ v = atomic_sub_if_positive(1, &core_state.available_cores);
+ if (v < 0)
+ return;
+
+ /* ... if a CPU is available, Turn on NAPI polling for that CPU. */
+ for_each_online_cpu(cpu) {
+ if (!cpu_test_and_set(cpu, core_state.cpu_state)) {
+ v = smp_call_function_single(cpu, cvm_oct_enable_napi,
+ NULL, 0);
+ if (v)
+ panic("Can't enable NAPI.");
+ break;
+ }
+ }
+}
+
+static void cvm_oct_no_more_work(void)
+{
+ int cpu = smp_processor_id();
+
+ /*
+ * CPU zero is special. It always has the irq enabled when
+ * waiting for incoming packets.
+ */
+ if (cpu == 0) {
+ enable_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group);
+ return;
+ }
+
+ cpu_clear(cpu, core_state.cpu_state);
+ atomic_add(1, &core_state.available_cores);
}
-#ifdef CONFIG_NET_POLL_CONTROLLER
/**
- * This is called when the kernel needs to manually poll the
- * device. For Octeon, this is simply calling the interrupt
- * handler. We actually poll all the devices, not just the
- * one supplied.
+ * cvm_oct_do_interrupt - interrupt handler.
+ *
+ * The interrupt occurs whenever the POW has packets in our group.
*
- * @dev: Device to poll. Unused
*/
-void cvm_oct_poll_controller(struct net_device *dev)
+static irqreturn_t cvm_oct_do_interrupt(int cpl, void *dev_id)
{
- preempt_disable();
- tasklet_schedule(&cvm_oct_tasklet[smp_processor_id()].t);
- preempt_enable();
+ /* Disable the IRQ and start napi_poll. */
+ disable_irq_nosync(OCTEON_IRQ_WORKQ0 + pow_receive_group);
+ cvm_oct_enable_napi(NULL);
+
+ return IRQ_HANDLED;
}
-#endif
/**
- * This is called on receive errors, and determines if the packet
- * can be dropped early-on in cvm_oct_tasklet_rx().
- *
+ * cvm_oct_check_rcv_error - process receive errors
* @work: Work queue entry pointing to the packet.
+ *
* Returns Non-zero if the packet can be dropped, zero otherwise.
*/
static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work)
}
/**
- * Tasklet function that is scheduled on a core when an interrupt occurs.
+ * cvm_oct_napi_poll - the NAPI poll function.
+ * @napi: The NAPI instance, or null if called from cvm_oct_poll_controller
+ * @budget: Maximum number of packets to receive.
*
- * @unused:
+ * Returns the number of packets processed.
*/
-void cvm_oct_tasklet_rx(unsigned long unused)
+static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
{
- const int coreid = cvmx_get_core_num();
- uint64_t old_group_mask;
- uint64_t old_scratch;
- int rx_count = 0;
- int number_to_free;
- int num_freed;
- int packet_not_copied;
+ const int coreid = cvmx_get_core_num();
+ uint64_t old_group_mask;
+ uint64_t old_scratch;
+ int rx_count = 0;
+ int did_work_request = 0;
+ int packet_not_copied;
/* Prefetch cvm_oct_device since we know we need it soon */
prefetch(cvm_oct_device);
cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(coreid),
(old_group_mask & ~0xFFFFull) | 1 << pow_receive_group);
- if (USE_ASYNC_IOBDMA)
+ if (USE_ASYNC_IOBDMA) {
cvmx_pow_work_request_async(CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT);
+ did_work_request = 1;
+ }
- while (1) {
+ while (rx_count < budget) {
struct sk_buff *skb = NULL;
+ struct sk_buff **pskb = NULL;
int skb_in_hw;
cvmx_wqe_t *work;
- if (USE_ASYNC_IOBDMA) {
+ if (USE_ASYNC_IOBDMA && did_work_request)
work = cvmx_pow_work_response_async(CVMX_SCR_SCRATCH);
- } else {
- if ((INTERRUPT_LIMIT == 0)
- || likely(rx_count < MAX_RX_PACKETS))
- work =
- cvmx_pow_work_request_sync
- (CVMX_POW_NO_WAIT);
- else
- work = NULL;
- }
+ else
+ work = cvmx_pow_work_request_sync(CVMX_POW_NO_WAIT);
+
prefetch(work);
- if (work == NULL)
+ did_work_request = 0;
+ if (work == NULL) {
+ union cvmx_pow_wq_int wq_int;
+ wq_int.u64 = 0;
+ wq_int.s.iq_dis = 1 << pow_receive_group;
+ wq_int.s.wq_int = 1 << pow_receive_group;
+ cvmx_write_csr(CVMX_POW_WQ_INT, wq_int.u64);
break;
+ }
+ pskb = (struct sk_buff **)(cvm_oct_get_buffer_ptr(work->packet_ptr) - sizeof(void *));
+ prefetch(pskb);
- /*
- * Limit each core to processing MAX_RX_PACKETS
- * packets without a break. This way the RX can't
- * starve the TX task.
- */
- if (USE_ASYNC_IOBDMA) {
-
- if ((INTERRUPT_LIMIT == 0)
- || likely(rx_count < MAX_RX_PACKETS))
- cvmx_pow_work_request_async_nocheck
- (CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT);
- else {
- cvmx_scratch_write64(CVMX_SCR_SCRATCH,
- 0x8000000000000000ull);
- cvmx_pow_tag_sw_null_nocheck();
- }
+ if (USE_ASYNC_IOBDMA && rx_count < (budget - 1)) {
+ cvmx_pow_work_request_async_nocheck(CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT);
+ did_work_request = 1;
+ }
+
+ if (rx_count == 0) {
+ /*
+ * First time through, see if there is enough
+ * work waiting to merit waking another
+ * CPU.
+ */
+ union cvmx_pow_wq_int_cntx counts;
+ int backlog;
+ int cores_in_use = core_state.baseline_cores - atomic_read(&core_state.available_cores);
+ counts.u64 = cvmx_read_csr(CVMX_POW_WQ_INT_CNTX(pow_receive_group));
+ backlog = counts.s.iq_cnt + counts.s.ds_cnt;
+ if (backlog > budget * cores_in_use && napi != NULL)
+ cvm_oct_enable_one_cpu();
}
skb_in_hw = USE_SKBUFFS_IN_HW && work->word2.s.bufs == 1;
if (likely(skb_in_hw)) {
- skb =
- *(struct sk_buff
- **)(cvm_oct_get_buffer_ptr(work->packet_ptr) -
- sizeof(void *));
+ skb = *pskb;
prefetch(&skb->head);
prefetch(&skb->len);
}
prefetch(cvm_oct_device[work->ipprt]);
- rx_count++;
/* Immediately throw away all packets with receive errors */
if (unlikely(work->word2.snoip.rcv_error)) {
if (cvm_oct_check_rcv_error(work))
* buffer.
*/
if (likely(skb_in_hw)) {
- /*
- * This calculation was changed in case the
- * skb header is using a different address
- * aliasing type than the buffer. It doesn't
- * make any differnece now, but the new one is
- * more correct.
- */
- skb->data =
- skb->head + work->packet_ptr.s.addr -
- cvmx_ptr_to_phys(skb->head);
+ skb->data = skb->head + work->packet_ptr.s.addr - cvmx_ptr_to_phys(skb->head);
prefetch(skb->data);
skb->len = work->len;
skb_set_tail_pointer(skb, skb->len);
packet_not_copied = 1;
} else {
-
/*
* We have to copy the packet. First allocate
* an skbuff for it.
*/
skb = dev_alloc_skb(work->len);
if (!skb) {
- DEBUGPRINT("Port %d failed to allocate "
- "skbuff, packet dropped\n",
- work->ipprt);
+ DEBUGPRINT("Port %d failed to allocate skbuff, packet dropped\n",
+ work->ipprt);
cvm_oct_free_work(work);
continue;
}
/*
* Check if we've received a packet that was
- * entirely stored in the work entry. This is
- * untested.
+ * entirely stored in the work entry.
*/
if (unlikely(work->word2.s.bufs == 0)) {
uint8_t *ptr = work->packet_data;
/* No packet buffers to free */
} else {
int segments = work->word2.s.bufs;
- union cvmx_buf_ptr segment_ptr =
- work->packet_ptr;
+ union cvmx_buf_ptr segment_ptr = work->packet_ptr;
int len = work->len;
while (segments--) {
union cvmx_buf_ptr next_ptr =
- *(union cvmx_buf_ptr *)
- cvmx_phys_to_ptr(segment_ptr.s.
- addr - 8);
+ *(union cvmx_buf_ptr *)cvmx_phys_to_ptr(segment_ptr.s.addr - 8);
+
/*
* Octeon Errata PKI-100: The segment size is
* wrong. Until it is fixed, calculate the
* one: int segment_size =
* segment_ptr.s.size;
*/
- int segment_size =
- CVMX_FPA_PACKET_POOL_SIZE -
- (segment_ptr.s.addr -
- (((segment_ptr.s.addr >> 7) -
- segment_ptr.s.back) << 7));
- /* Don't copy more than what is left
- in the packet */
+ int segment_size = CVMX_FPA_PACKET_POOL_SIZE -
+ (segment_ptr.s.addr - (((segment_ptr.s.addr >> 7) - segment_ptr.s.back) << 7));
+ /*
+ * Don't copy more than what
+ * is left in the packet.
+ */
if (segment_size > len)
segment_size = len;
/* Copy the data into the packet */
memcpy(skb_put(skb, segment_size),
- cvmx_phys_to_ptr(segment_ptr.s.
- addr),
+ cvmx_phys_to_ptr(segment_ptr.s.addr),
segment_size);
- /* Reduce the amount of bytes left
- to copy */
len -= segment_size;
segment_ptr = next_ptr;
}
struct net_device *dev = cvm_oct_device[work->ipprt];
struct octeon_ethernet *priv = netdev_priv(dev);
- /* Only accept packets for devices
- that are currently up */
+ /*
+ * Only accept packets for devices that are
+ * currently up.
+ */
if (likely(dev->flags & IFF_UP)) {
skb->protocol = eth_type_trans(skb, dev);
skb->dev = dev;
- if (unlikely
- (work->word2.s.not_IP
- || work->word2.s.IP_exc
- || work->word2.s.L4_error))
+ if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc || work->word2.s.L4_error))
skb->ip_summed = CHECKSUM_NONE;
else
skb->ip_summed = CHECKSUM_UNNECESSARY;
#endif
}
netif_receive_skb(skb);
+ rx_count++;
} else {
+ /* Drop any packet received for a device that isn't up */
/*
- * Drop any packet received for a
- * device that isn't up.
- */
- /*
- DEBUGPRINT("%s: Device not up, packet dropped\n",
- dev->name);
- */
+ DEBUGPRINT("%s: Device not up, packet dropped\n",
+ dev->name);
+ */
#ifdef CONFIG_64BIT
atomic64_add(1, (atomic64_t *)&priv->stats.rx_dropped);
#else
* Drop any packet received for a device that
* doesn't exist.
*/
- DEBUGPRINT("Port %d not controlled by Linux, packet "
- "dropped\n",
- work->ipprt);
+ DEBUGPRINT("Port %d not controlled by Linux, packet dropped\n",
+ work->ipprt);
dev_kfree_skb_irq(skb);
}
/*
cvm_oct_free_work(work);
}
}
-
/* Restore the original POW group mask */
cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(coreid), old_group_mask);
if (USE_ASYNC_IOBDMA) {
/* Restore the scratch area */
cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
}
+ cvm_oct_rx_refill_pool(0);
- if (USE_SKBUFFS_IN_HW) {
- /* Refill the packet buffer pool */
- number_to_free =
- cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
-
- if (number_to_free > 0) {
- cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE,
- -number_to_free);
- num_freed =
- cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL,
- CVMX_FPA_PACKET_POOL_SIZE,
- number_to_free);
- if (num_freed != number_to_free) {
- cvmx_fau_atomic_add32
- (FAU_NUM_PACKET_BUFFERS_TO_FREE,
- number_to_free - num_freed);
- }
- }
+ if (rx_count < budget && napi != NULL) {
+ /* No more work */
+ napi_complete(napi);
+ cvm_oct_no_more_work();
}
+ return rx_count;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * cvm_oct_poll_controller - poll for receive packets
+ * device.
+ *
+ * @dev: Device to poll. Unused
+ */
+void cvm_oct_poll_controller(struct net_device *dev)
+{
+ cvm_oct_napi_poll(NULL, 16);
+}
+#endif
+
void cvm_oct_rx_initialize(void)
{
int i;
- /* Initialize all of the tasklets */
- for (i = 0; i < NR_CPUS; i++)
- tasklet_init(&cvm_oct_tasklet[i].t, cvm_oct_tasklet_rx, 0);
+ struct net_device *dev_for_napi = NULL;
+ union cvmx_pow_wq_int_thrx int_thr;
+ union cvmx_pow_wq_int_pc int_pc;
+
+ for (i = 0; i < TOTAL_NUMBER_OF_PORTS; i++) {
+ if (cvm_oct_device[i]) {
+ dev_for_napi = cvm_oct_device[i];
+ break;
+ }
+ }
+
+ if (NULL == dev_for_napi)
+ panic("No net_devices were allocated.");
+
+ if (max_rx_cpus > 1 && max_rx_cpus < num_online_cpus())
+ atomic_set(&core_state.available_cores, max_rx_cpus);
+ else
+ atomic_set(&core_state.available_cores, num_online_cpus());
+ core_state.baseline_cores = atomic_read(&core_state.available_cores);
+
+ core_state.cpu_state = CPU_MASK_NONE;
+ for_each_possible_cpu(i) {
+ netif_napi_add(dev_for_napi, &cvm_oct_napi[i].napi,
+ cvm_oct_napi_poll, rx_napi_weight);
+ napi_enable(&cvm_oct_napi[i].napi);
+ }
+ /* Register an IRQ hander for to receive POW interrupts */
+ i = request_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group,
+ cvm_oct_do_interrupt, 0, "Ethernet", cvm_oct_device);
+
+ if (i)
+ panic("Could not acquire Ethernet IRQ %d\n",
+ OCTEON_IRQ_WORKQ0 + pow_receive_group);
+
+ disable_irq_nosync(OCTEON_IRQ_WORKQ0 + pow_receive_group);
+
+ int_thr.u64 = 0;
+ int_thr.s.tc_en = 1;
+ int_thr.s.tc_thr = 1;
+ /* Enable POW interrupt when our port has at least one packet */
+ cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), int_thr.u64);
+
+ int_pc.u64 = 0;
+ int_pc.s.pc_thr = 5;
+ cvmx_write_csr(CVMX_POW_WQ_INT_PC, int_pc.u64);
+
+
+ /* Scheduld NAPI now. This will indirectly enable interrupts. */
+ cvm_oct_enable_one_cpu();
}
void cvm_oct_rx_shutdown(void)
{
int i;
- /* Shutdown all of the tasklets */
- for (i = 0; i < NR_CPUS; i++)
- tasklet_kill(&cvm_oct_tasklet[i].t);
+ /* Shutdown all of the NAPIs */
+ for_each_possible_cpu(i)
+ netif_napi_del(&cvm_oct_napi[i].napi);
}
* This file may also be available under a different license from Cavium.
* Contact Cavium Networks for more information
*********************************************************************/
+#include "cvmx-fau.h"
-irqreturn_t cvm_oct_do_interrupt(int cpl, void *dev_id);
void cvm_oct_poll_controller(struct net_device *dev);
-void cvm_oct_tasklet_rx(unsigned long unused);
-
void cvm_oct_rx_initialize(void);
void cvm_oct_rx_shutdown(void);
+
+static inline void cvm_oct_rx_refill_pool(int fill_threshold)
+{
+ int number_to_free;
+ int num_freed;
+ /* Refill the packet buffer pool */
+ number_to_free =
+ cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
+
+ if (number_to_free > fill_threshold) {
+ cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE,
+ -number_to_free);
+ num_freed = cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL,
+ CVMX_FPA_PACKET_POOL_SIZE,
+ number_to_free);
+ if (num_freed != number_to_free) {
+ cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE,
+ number_to_free - num_freed);
+ }
+ }
+}
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
-#include <linux/mii.h>
#include <net/dst.h>
#include <asm/octeon/octeon.h>
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
-#include <linux/mii.h>
#include <net/dst.h>
#include <asm/octeon/octeon.h>
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
- * Copyright (c) 2003-2007 Cavium Networks
+ * Copyright (c) 2003-2010 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
#include <linux/etherdevice.h>
#include <linux/ip.h>
#include <linux/string.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
#include <net/dst.h>
#ifdef CONFIG_XFRM
#include <linux/xfrm.h>
#include "cvmx-wqe.h"
#include "cvmx-fau.h"
+#include "cvmx-pip.h"
#include "cvmx-pko.h"
#include "cvmx-helper.h"
#include "cvmx-gmxx-defs.h"
+#define CVM_OCT_SKB_CB(skb) ((u64 *)((skb)->cb))
+
/*
* You can define GET_SKBUFF_QOS() to override how the skbuff output
* function determines which output queue is used. The default
#define GET_SKBUFF_QOS(skb) 0
#endif
+static void cvm_oct_tx_do_cleanup(unsigned long arg);
+static DECLARE_TASKLET(cvm_oct_tx_cleanup_tasklet, cvm_oct_tx_do_cleanup, 0);
+
+/* Maximum number of SKBs to try to free per xmit packet. */
+#define MAX_SKB_TO_FREE (MAX_OUT_QUEUE_DEPTH * 2)
+
+static inline int32_t cvm_oct_adjust_skb_to_free(int32_t skb_to_free, int fau)
+{
+ int32_t undo;
+ undo = skb_to_free > 0 ? MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE;
+ if (undo > 0)
+ cvmx_fau_atomic_add32(fau, -undo);
+ skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ? MAX_SKB_TO_FREE : -skb_to_free;
+ return skb_to_free;
+}
+
+static void cvm_oct_kick_tx_poll_watchdog(void)
+{
+ union cvmx_ciu_timx ciu_timx;
+ ciu_timx.u64 = 0;
+ ciu_timx.s.one_shot = 1;
+ ciu_timx.s.len = cvm_oct_tx_poll_interval;
+ cvmx_write_csr(CVMX_CIU_TIMX(1), ciu_timx.u64);
+}
+
+void cvm_oct_free_tx_skbs(struct net_device *dev)
+{
+ int32_t skb_to_free;
+ int qos, queues_per_port;
+ int total_freed = 0;
+ int total_remaining = 0;
+ unsigned long flags;
+ struct octeon_ethernet *priv = netdev_priv(dev);
+
+ queues_per_port = cvmx_pko_get_num_queues(priv->port);
+ /* Drain any pending packets in the free list */
+ for (qos = 0; qos < queues_per_port; qos++) {
+ if (skb_queue_len(&priv->tx_free_list[qos]) == 0)
+ continue;
+ skb_to_free = cvmx_fau_fetch_and_add32(priv->fau+qos*4, MAX_SKB_TO_FREE);
+ skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau+qos*4);
+
+
+ total_freed += skb_to_free;
+ if (skb_to_free > 0) {
+ struct sk_buff *to_free_list = NULL;
+ spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+ while (skb_to_free > 0) {
+ struct sk_buff *t = __skb_dequeue(&priv->tx_free_list[qos]);
+ t->next = to_free_list;
+ to_free_list = t;
+ skb_to_free--;
+ }
+ spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
+ /* Do the actual freeing outside of the lock. */
+ while (to_free_list) {
+ struct sk_buff *t = to_free_list;
+ to_free_list = to_free_list->next;
+ dev_kfree_skb_any(t);
+ }
+ }
+ total_remaining += skb_queue_len(&priv->tx_free_list[qos]);
+ }
+ if (total_freed >= 0 && netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ if (total_remaining)
+ cvm_oct_kick_tx_poll_watchdog();
+}
+
/**
- * Packet transmit
- *
+ * cvm_oct_xmit - transmit a packet
* @skb: Packet to send
* @dev: Device info structure
- * Returns Always returns zero
+ *
+ * Returns Always returns NETDEV_TX_OK
*/
int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
{
union cvmx_buf_ptr hw_buffer;
uint64_t old_scratch;
uint64_t old_scratch2;
- int dropped;
int qos;
- int queue_it_up;
+ int i;
+ enum {QUEUE_CORE, QUEUE_HW, QUEUE_DROP} queue_type;
struct octeon_ethernet *priv = netdev_priv(dev);
+ struct sk_buff *to_free_list;
int32_t skb_to_free;
- int32_t undo;
int32_t buffers_to_free;
+ u32 total_to_clean;
+ unsigned long flags;
#if REUSE_SKBUFFS_WITHOUT_FREE
unsigned char *fpa_head;
#endif
*/
prefetch(priv);
- /* Start off assuming no drop */
- dropped = 0;
-
/*
* The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to
* completely remove "qos" in the event neither interface
MAX_SKB_TO_FREE);
}
+ /*
+ * We have space for 6 segment pointers, If there will be more
+ * than that, we must linearize.
+ */
+ if (unlikely(skb_shinfo(skb)->nr_frags > 5)) {
+ if (unlikely(__skb_linearize(skb))) {
+ queue_type = QUEUE_DROP;
+ if (USE_ASYNC_IOBDMA) {
+ /* Get the number of skbuffs in use by the hardware */
+ CVMX_SYNCIOBDMA;
+ skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
+ } else {
+ /* Get the number of skbuffs in use by the hardware */
+ skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
+ MAX_SKB_TO_FREE);
+ }
+ skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau + qos * 4);
+ spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+ goto skip_xmit;
+ }
+ }
+
/*
* The CN3XXX series of parts has an errata (GMX-401) which
* causes the GMX block to hang if a collision occurs towards
}
}
- /* Build the PKO buffer pointer */
- hw_buffer.u64 = 0;
- hw_buffer.s.addr = cvmx_ptr_to_phys(skb->data);
- hw_buffer.s.pool = 0;
- hw_buffer.s.size =
- (unsigned long)skb_end_pointer(skb) - (unsigned long)skb->head;
-
/* Build the PKO command */
pko_command.u64 = 0;
pko_command.s.n2 = 1; /* Don't pollute L2 with the outgoing packet */
pko_command.s.subone0 = 1;
pko_command.s.dontfree = 1;
- pko_command.s.reg0 = priv->fau + qos * 4;
+
+ /* Build the PKO buffer pointer */
+ hw_buffer.u64 = 0;
+ if (skb_shinfo(skb)->nr_frags == 0) {
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
+ hw_buffer.s.pool = 0;
+ hw_buffer.s.size = skb->len;
+ } else {
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
+ hw_buffer.s.pool = 0;
+ hw_buffer.s.size = skb_headlen(skb);
+ CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i;
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset));
+ hw_buffer.s.size = fs->size;
+ CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
+ }
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)CVM_OCT_SKB_CB(skb));
+ hw_buffer.s.size = skb_shinfo(skb)->nr_frags + 1;
+ pko_command.s.segs = skb_shinfo(skb)->nr_frags + 1;
+ pko_command.s.gather = 1;
+ goto dont_put_skbuff_in_hw;
+ }
+
/*
* See if we can put this skb in the FPA pool. Any strange
* behavior from the Linux networking stack will most likely
* shown a 25% increase in performance under some loads.
*/
#if REUSE_SKBUFFS_WITHOUT_FREE
- fpa_head = skb->head + 128 - ((unsigned long)skb->head & 0x7f);
+ fpa_head = skb->head + 256 - ((unsigned long)skb->head & 0x7f);
if (unlikely(skb->data < fpa_head)) {
/*
* printk("TX buffer beginning can't meet FPA
* We can use this buffer in the FPA. We don't need the FAU
* update anymore
*/
- pko_command.s.reg0 = 0;
pko_command.s.dontfree = 0;
- hw_buffer.s.back = (skb->data - fpa_head) >> 7;
+ hw_buffer.s.back = ((unsigned long)skb->data >> 7) - ((unsigned long)fpa_head >> 7);
*(struct sk_buff **)(fpa_head - sizeof(void *)) = skb;
/*
skb->tc_verd = 0;
#endif /* CONFIG_NET_CLS_ACT */
#endif /* CONFIG_NET_SCHED */
+#endif /* REUSE_SKBUFFS_WITHOUT_FREE */
dont_put_skbuff_in_hw:
-#endif /* REUSE_SKBUFFS_WITHOUT_FREE */
/* Check if we can use the hardware checksumming */
if (USE_HW_TCPUDP_CHECKSUM && (skb->protocol == htons(ETH_P_IP)) &&
(ip_hdr(skb)->version == 4) && (ip_hdr(skb)->ihl == 5) &&
((ip_hdr(skb)->frag_off == 0) || (ip_hdr(skb)->frag_off == 1 << 14))
- && ((ip_hdr(skb)->protocol == IP_PROTOCOL_TCP)
- || (ip_hdr(skb)->protocol == IP_PROTOCOL_UDP))) {
+ && ((ip_hdr(skb)->protocol == IPPROTO_TCP)
+ || (ip_hdr(skb)->protocol == IPPROTO_UDP))) {
/* Use hardware checksum calc */
pko_command.s.ipoffp1 = sizeof(struct ethhdr) + 1;
}
cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
}
- /*
- * We try to claim MAX_SKB_TO_FREE buffers. If there were not
- * that many available, we have to un-claim (undo) any that
- * were in excess. If skb_to_free is positive we will free
- * that many buffers.
- */
- undo = skb_to_free > 0 ?
- MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE;
- if (undo > 0)
- cvmx_fau_atomic_add32(priv->fau+qos*4, -undo);
- skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ?
- MAX_SKB_TO_FREE : -skb_to_free;
+ skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau+qos*4);
/*
* If we're sending faster than the receive can free them then
* don't do the HW free.
*/
- if ((buffers_to_free < -100) && !pko_command.s.dontfree) {
+ if ((buffers_to_free < -100) && !pko_command.s.dontfree)
pko_command.s.dontfree = 1;
- pko_command.s.reg0 = priv->fau + qos * 4;
+
+ if (pko_command.s.dontfree) {
+ queue_type = QUEUE_CORE;
+ pko_command.s.reg0 = priv->fau+qos*4;
+ } else {
+ queue_type = QUEUE_HW;
}
+ if (USE_ASYNC_IOBDMA)
+ cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH, FAU_TOTAL_TX_TO_CLEAN, 1);
- cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,
- CVMX_PKO_LOCK_CMD_QUEUE);
+ spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
/* Drop this packet if we have too many already queued to the HW */
- if (unlikely
- (skb_queue_len(&priv->tx_free_list[qos]) >= MAX_OUT_QUEUE_DEPTH)) {
- /*
- DEBUGPRINT("%s: Tx dropped. Too many queued\n", dev->name);
- */
- dropped = 1;
+ if (unlikely(skb_queue_len(&priv->tx_free_list[qos]) >= MAX_OUT_QUEUE_DEPTH)) {
+ if (dev->tx_queue_len != 0) {
+ /* Drop the lock when notifying the core. */
+ spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
+ netif_stop_queue(dev);
+ spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+ } else {
+ /* If not using normal queueing. */
+ queue_type = QUEUE_DROP;
+ goto skip_xmit;
+ }
}
+
+ cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,
+ CVMX_PKO_LOCK_NONE);
+
/* Send the packet to the output queue */
- else if (unlikely
- (cvmx_pko_send_packet_finish
- (priv->port, priv->queue + qos, pko_command, hw_buffer,
- CVMX_PKO_LOCK_CMD_QUEUE))) {
+ if (unlikely(cvmx_pko_send_packet_finish(priv->port,
+ priv->queue + qos,
+ pko_command, hw_buffer,
+ CVMX_PKO_LOCK_NONE))) {
DEBUGPRINT("%s: Failed to send the packet\n", dev->name);
- dropped = 1;
+ queue_type = QUEUE_DROP;
+ }
+skip_xmit:
+ to_free_list = NULL;
+
+ switch (queue_type) {
+ case QUEUE_DROP:
+ skb->next = to_free_list;
+ to_free_list = skb;
+ priv->stats.tx_dropped++;
+ break;
+ case QUEUE_HW:
+ cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, -1);
+ break;
+ case QUEUE_CORE:
+ __skb_queue_tail(&priv->tx_free_list[qos], skb);
+ break;
+ default:
+ BUG();
+ }
+
+ while (skb_to_free > 0) {
+ struct sk_buff *t = __skb_dequeue(&priv->tx_free_list[qos]);
+ t->next = to_free_list;
+ to_free_list = t;
+ skb_to_free--;
+ }
+
+ spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
+
+ /* Do the actual freeing outside of the lock. */
+ while (to_free_list) {
+ struct sk_buff *t = to_free_list;
+ to_free_list = to_free_list->next;
+ dev_kfree_skb_any(t);
}
if (USE_ASYNC_IOBDMA) {
+ CVMX_SYNCIOBDMA;
+ total_to_clean = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
/* Restore the scratch area */
cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2);
- }
-
- queue_it_up = 0;
- if (unlikely(dropped)) {
- dev_kfree_skb_any(skb);
- priv->stats.tx_dropped++;
} else {
- if (USE_SKBUFFS_IN_HW) {
- /* Put this packet on the queue to be freed later */
- if (pko_command.s.dontfree)
- queue_it_up = 1;
- else
- cvmx_fau_atomic_add32
- (FAU_NUM_PACKET_BUFFERS_TO_FREE, -1);
- } else {
- /* Put this packet on the queue to be freed later */
- queue_it_up = 1;
- }
+ total_to_clean = cvmx_fau_fetch_and_add32(FAU_TOTAL_TX_TO_CLEAN, 1);
}
- if (queue_it_up) {
- spin_lock(&priv->tx_free_list[qos].lock);
- __skb_queue_tail(&priv->tx_free_list[qos], skb);
- cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 0);
- spin_unlock(&priv->tx_free_list[qos].lock);
- } else {
- cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 1);
+ if (total_to_clean & 0x3ff) {
+ /*
+ * Schedule the cleanup tasklet every 1024 packets for
+ * the pathological case of high traffic on one port
+ * delaying clean up of packets on a different port
+ * that is blocked waiting for the cleanup.
+ */
+ tasklet_schedule(&cvm_oct_tx_cleanup_tasklet);
}
- return 0;
+ cvm_oct_kick_tx_poll_watchdog();
+
+ return NETDEV_TX_OK;
}
/**
- * Packet transmit to the POW
- *
+ * cvm_oct_xmit_pow - transmit a packet to the POW
* @skb: Packet to send
* @dev: Device info structure
+
* Returns Always returns zero
*/
int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
work->word2.s.dec_ipcomp = 0; /* FIXME */
#endif
work->word2.s.tcp_or_udp =
- (ip_hdr(skb)->protocol == IP_PROTOCOL_TCP)
- || (ip_hdr(skb)->protocol == IP_PROTOCOL_UDP);
+ (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ || (ip_hdr(skb)->protocol == IPPROTO_UDP);
#if 0
/* FIXME */
work->word2.s.dec_ipsec = 0;
}
/**
- * Transmit a work queue entry out of the ethernet port. Both
- * the work queue entry and the packet data can optionally be
- * freed. The work will be freed on error as well.
- *
- * @dev: Device to transmit out.
- * @work_queue_entry:
- * Work queue entry to send
- * @do_free: True if the work queue entry and packet data should be
- * freed. If false, neither will be freed.
- * @qos: Index into the queues for this port to transmit on. This
- * is used to implement QoS if their are multiple queues per
- * port. This parameter must be between 0 and the number of
- * queues per port minus 1. Values outside of this range will
- * be change to zero.
+ * cvm_oct_tx_shutdown_dev - free all skb that are currently queued for TX.
+ * @dev: Device being shutdown
*
- * Returns Zero on success, negative on failure.
*/
-int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
- int do_free, int qos)
+void cvm_oct_tx_shutdown_dev(struct net_device *dev)
{
- unsigned long flags;
- union cvmx_buf_ptr hw_buffer;
- cvmx_pko_command_word0_t pko_command;
- int dropped;
struct octeon_ethernet *priv = netdev_priv(dev);
- cvmx_wqe_t *work = work_queue_entry;
+ unsigned long flags;
+ int qos;
- if (!(dev->flags & IFF_UP)) {
- DEBUGPRINT("%s: Device not up\n", dev->name);
- if (do_free)
- cvm_oct_free_work(work);
- return -1;
+ for (qos = 0; qos < 16; qos++) {
+ spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+ while (skb_queue_len(&priv->tx_free_list[qos]))
+ dev_kfree_skb_any(__skb_dequeue
+ (&priv->tx_free_list[qos]));
+ spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
}
+}
- /* The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to completely
- remove "qos" in the event neither interface supports
- multiple queues per port */
- if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 > 1) ||
- (CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 > 1)) {
- if (qos <= 0)
- qos = 0;
- else if (qos >= cvmx_pko_get_num_queues(priv->port))
- qos = 0;
- } else
- qos = 0;
-
- /* Start off assuming no drop */
- dropped = 0;
-
- local_irq_save(flags);
- cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,
- CVMX_PKO_LOCK_CMD_QUEUE);
-
- /* Build the PKO buffer pointer */
- hw_buffer.u64 = 0;
- hw_buffer.s.addr = work->packet_ptr.s.addr;
- hw_buffer.s.pool = CVMX_FPA_PACKET_POOL;
- hw_buffer.s.size = CVMX_FPA_PACKET_POOL_SIZE;
- hw_buffer.s.back = work->packet_ptr.s.back;
+static void cvm_oct_tx_do_cleanup(unsigned long arg)
+{
+ int port;
- /* Build the PKO command */
- pko_command.u64 = 0;
- pko_command.s.n2 = 1; /* Don't pollute L2 with the outgoing packet */
- pko_command.s.dontfree = !do_free;
- pko_command.s.segs = work->word2.s.bufs;
- pko_command.s.total_bytes = work->len;
+ for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) {
+ if (cvm_oct_device[port]) {
+ struct net_device *dev = cvm_oct_device[port];
+ cvm_oct_free_tx_skbs(dev);
+ }
+ }
+}
- /* Check if we can use the hardware checksumming */
- if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc))
- pko_command.s.ipoffp1 = 0;
- else
- pko_command.s.ipoffp1 = sizeof(struct ethhdr) + 1;
+static irqreturn_t cvm_oct_tx_cleanup_watchdog(int cpl, void *dev_id)
+{
+ /* Disable the interrupt. */
+ cvmx_write_csr(CVMX_CIU_TIMX(1), 0);
+ /* Do the work in the tasklet. */
+ tasklet_schedule(&cvm_oct_tx_cleanup_tasklet);
+ return IRQ_HANDLED;
+}
- /* Send the packet to the output queue */
- if (unlikely
- (cvmx_pko_send_packet_finish
- (priv->port, priv->queue + qos, pko_command, hw_buffer,
- CVMX_PKO_LOCK_CMD_QUEUE))) {
- DEBUGPRINT("%s: Failed to send the packet\n", dev->name);
- dropped = -1;
- }
- local_irq_restore(flags);
+void cvm_oct_tx_initialize(void)
+{
+ int i;
- if (unlikely(dropped)) {
- if (do_free)
- cvm_oct_free_work(work);
- priv->stats.tx_dropped++;
- } else if (do_free)
- cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, DONT_WRITEBACK(1));
+ /* Disable the interrupt. */
+ cvmx_write_csr(CVMX_CIU_TIMX(1), 0);
+ /* Register an IRQ hander for to receive CIU_TIMX(1) interrupts */
+ i = request_irq(OCTEON_IRQ_TIMER1,
+ cvm_oct_tx_cleanup_watchdog, 0,
+ "Ethernet", cvm_oct_device);
- return dropped;
+ if (i)
+ panic("Could not acquire Ethernet IRQ %d\n", OCTEON_IRQ_TIMER1);
}
-EXPORT_SYMBOL(cvm_oct_transmit_qos);
-/**
- * This function frees all skb that are currently queued for TX.
- *
- * @dev: Device being shutdown
- */
-void cvm_oct_tx_shutdown(struct net_device *dev)
+void cvm_oct_tx_shutdown(void)
{
- struct octeon_ethernet *priv = netdev_priv(dev);
- unsigned long flags;
- int qos;
-
- for (qos = 0; qos < 16; qos++) {
- spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
- while (skb_queue_len(&priv->tx_free_list[qos]))
- dev_kfree_skb_any(__skb_dequeue
- (&priv->tx_free_list[qos]));
- spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
- }
+ /* Free the interrupt handler */
+ free_irq(OCTEON_IRQ_TIMER1, cvm_oct_device);
}
int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev);
int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
int do_free, int qos);
-void cvm_oct_tx_shutdown(struct net_device *dev);
-
-/**
- * Free dead transmit skbs.
- *
- * @priv: The driver data
- * @skb_to_free: The number of SKBs to free (free none if negative).
- * @qos: The queue to free from.
- * @take_lock: If true, acquire the skb list lock.
- */
-static inline void cvm_oct_free_tx_skbs(struct octeon_ethernet *priv,
- int skb_to_free,
- int qos, int take_lock)
-{
- /* Free skbuffs not in use by the hardware. */
- if (skb_to_free > 0) {
- if (take_lock)
- spin_lock(&priv->tx_free_list[qos].lock);
- while (skb_to_free > 0) {
- dev_kfree_skb(__skb_dequeue(&priv->tx_free_list[qos]));
- skb_to_free--;
- }
- if (take_lock)
- spin_unlock(&priv->tx_free_list[qos].lock);
- }
-}
+void cvm_oct_tx_initialize(void);
+void cvm_oct_tx_shutdown(void);
+void cvm_oct_tx_shutdown_dev(struct net_device *dev);
} while (0)
/**
- * Given a packet data address, return a pointer to the
- * beginning of the packet buffer.
- *
+ * cvm_oct_get_buffer_ptr - convert packet data address to pointer
* @packet_ptr: Packet data hardware address
+ *
* Returns Packet buffer pointer
*/
static inline void *cvm_oct_get_buffer_ptr(union cvmx_buf_ptr packet_ptr)
}
/**
- * Given an IPD/PKO port number, return the logical interface it is
- * on.
- *
+ * INTERFACE - convert IPD port to locgical interface
* @ipd_port: Port to check
*
* Returns Logical interface
}
/**
- * Given an IPD/PKO port number, return the port's index on a
- * logical interface.
- *
+ * INDEX - convert IPD/PKO port number to the port's interface index
* @ipd_port: Port to check
*
* Returns Index into interface port list
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
-#include <linux/mii.h>
#include <net/dst.h>
#include <asm/octeon/octeon.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
-#include <linux/delay.h>
#include <linux/phy.h>
#include <net/dst.h>
#include "ethernet-tx.h"
#include "ethernet-mdio.h"
#include "ethernet-util.h"
-#include "ethernet-proc.h"
-
#include "cvmx-pip.h"
#include "cvmx-pko.h"
"\t\"eth2,spi3,spi7\" would cause these three devices to transmit\n"
"\tusing the pow_send_group.");
-static int disable_core_queueing = 1;
-module_param(disable_core_queueing, int, 0444);
-MODULE_PARM_DESC(disable_core_queueing, "\n"
- "\tWhen set the networking core's tx_queue_len is set to zero. This\n"
- "\tallows packets to be sent without lock contention in the packet\n"
- "\tscheduler resulting in some cases in improved throughput.\n");
+int max_rx_cpus = -1;
+module_param(max_rx_cpus, int, 0444);
+MODULE_PARM_DESC(max_rx_cpus, "\n"
+ "\t\tThe maximum number of CPUs to use for packet reception.\n"
+ "\t\tUse -1 to use all available CPUs.");
+int rx_napi_weight = 32;
+module_param(rx_napi_weight, int, 0444);
+MODULE_PARM_DESC(rx_napi_weight, "The NAPI WEIGHT parameter.");
/*
* The offset from mac_addr_base that should be used for the next port
static unsigned int cvm_oct_mac_addr_offset;
/**
- * Periodic timer to check auto negotiation
+ * cvm_oct_poll_queue - Workqueue for polling operations.
+ */
+struct workqueue_struct *cvm_oct_poll_queue;
+
+/**
+ * cvm_oct_poll_queue_stopping - flag to indicate polling should stop.
+ *
+ * Set to one right before cvm_oct_poll_queue is destroyed.
*/
-static struct timer_list cvm_oct_poll_timer;
+atomic_t cvm_oct_poll_queue_stopping = ATOMIC_INIT(0);
/**
* Array of every ethernet device owned by this driver indexed by
*/
struct net_device *cvm_oct_device[TOTAL_NUMBER_OF_PORTS];
-/**
- * Periodic timer tick for slow management operations
- *
- * @arg: Device to check
- */
-static void cvm_do_timer(unsigned long arg)
+u64 cvm_oct_tx_poll_interval;
+
+static void cvm_oct_rx_refill_worker(struct work_struct *work);
+static DECLARE_DELAYED_WORK(cvm_oct_rx_refill_work, cvm_oct_rx_refill_worker);
+
+static void cvm_oct_rx_refill_worker(struct work_struct *work)
{
- int32_t skb_to_free, undo;
- int queues_per_port;
- int qos;
- struct octeon_ethernet *priv;
- static int port;
+ /*
+ * FPA 0 may have been drained, try to refill it if we need
+ * more than num_packet_buffers / 2, otherwise normal receive
+ * processing will refill it. If it were drained, no packets
+ * could be received so cvm_oct_napi_poll would never be
+ * invoked to do the refill.
+ */
+ cvm_oct_rx_refill_pool(num_packet_buffers / 2);
- if (port >= CVMX_PIP_NUM_INPUT_PORTS) {
- /*
- * All ports have been polled. Start the next
- * iteration through the ports in one second.
- */
- port = 0;
- mod_timer(&cvm_oct_poll_timer, jiffies + HZ);
- return;
- }
- if (!cvm_oct_device[port])
- goto out;
+ if (!atomic_read(&cvm_oct_poll_queue_stopping))
+ queue_delayed_work(cvm_oct_poll_queue,
+ &cvm_oct_rx_refill_work, HZ);
+}
+
+static void cvm_oct_periodic_worker(struct work_struct *work)
+{
+ struct octeon_ethernet *priv = container_of(work,
+ struct octeon_ethernet,
+ port_periodic_work.work);
- priv = netdev_priv(cvm_oct_device[port]);
if (priv->poll)
- priv->poll(cvm_oct_device[port]);
-
- queues_per_port = cvmx_pko_get_num_queues(port);
- /* Drain any pending packets in the free list */
- for (qos = 0; qos < queues_per_port; qos++) {
- if (skb_queue_len(&priv->tx_free_list[qos]) == 0)
- continue;
- skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
- MAX_SKB_TO_FREE);
- undo = skb_to_free > 0 ?
- MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE;
- if (undo > 0)
- cvmx_fau_atomic_add32(priv->fau+qos*4, -undo);
- skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ?
- MAX_SKB_TO_FREE : -skb_to_free;
- cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 1);
- }
- cvm_oct_device[port]->netdev_ops->ndo_get_stats(cvm_oct_device[port]);
+ priv->poll(cvm_oct_device[priv->port]);
-out:
- port++;
- /* Poll the next port in a 50th of a second.
- This spreads the polling of ports out a little bit */
- mod_timer(&cvm_oct_poll_timer, jiffies + HZ / 50);
-}
+ cvm_oct_device[priv->port]->netdev_ops->ndo_get_stats(cvm_oct_device[priv->port]);
+
+ if (!atomic_read(&cvm_oct_poll_queue_stopping))
+ queue_delayed_work(cvm_oct_poll_queue, &priv->port_periodic_work, HZ);
+ }
-/**
- * Configure common hardware for all interfaces
- */
static __init void cvm_oct_configure_common_hw(void)
{
- int r;
/* Setup the FPA */
cvmx_fpa_enable();
cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL, CVMX_FPA_PACKET_POOL_SIZE,
cvmx_helper_setup_red(num_packet_buffers / 4,
num_packet_buffers / 8);
- /* Enable the MII interface */
- if (!octeon_is_simulation())
- cvmx_write_csr(CVMX_SMIX_EN(0), 1);
-
- /* Register an IRQ hander for to receive POW interrupts */
- r = request_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group,
- cvm_oct_do_interrupt, IRQF_SHARED, "Ethernet",
- cvm_oct_device);
-
-#if defined(CONFIG_SMP) && 0
- if (USE_MULTICORE_RECEIVE) {
- irq_set_affinity(OCTEON_IRQ_WORKQ0 + pow_receive_group,
- cpu_online_mask);
- }
-#endif
}
/**
- * Free a work queue entry received in a intercept callback.
+ * cvm_oct_free_work- Free a work queue entry
+ *
+ * @work_queue_entry: Work queue entry to free
*
- * @work_queue_entry:
- * Work queue entry to free
* Returns Zero on success, Negative on failure.
*/
int cvm_oct_free_work(void *work_queue_entry)
EXPORT_SYMBOL(cvm_oct_free_work);
/**
- * Get the low level ethernet statistics
- *
+ * cvm_oct_common_get_stats - get the low level ethernet statistics
* @dev: Device to get the statistics from
+ *
* Returns Pointer to the statistics
*/
static struct net_device_stats *cvm_oct_common_get_stats(struct net_device *dev)
}
/**
- * Change the link MTU. Unimplemented
- *
+ * cvm_oct_common_change_mtu - change the link MTU
* @dev: Device to change
* @new_mtu: The new MTU
*
}
/**
- * Set the multicast list. Currently unimplemented.
- *
+ * cvm_oct_common_set_multicast_list - set the multicast list
* @dev: Device to work on
*/
static void cvm_oct_common_set_multicast_list(struct net_device *dev)
}
/**
- * Set the hardware MAC address for a device
- *
- * @dev: Device to change the MAC address for
- * @addr: Address structure to change it too. MAC address is addr + 2.
+ * cvm_oct_common_set_mac_address - set the hardware MAC address for a device
+ * @dev: The device in question.
+ * @addr: Address structure to change it too.
+
* Returns Zero on success
*/
static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr)
}
/**
- * Per network device initialization
- *
+ * cvm_oct_common_init - per network device initialization
* @dev: Device to initialize
+ *
* Returns Zero on success
*/
int cvm_oct_common_init(struct net_device *dev)
&& (always_use_pow || strstr(pow_send_list, dev->name)))
priv->queue = -1;
- if (priv->queue != -1 && USE_HW_TCPUDP_CHECKSUM)
- dev->features |= NETIF_F_IP_CSUM;
+ if (priv->queue != -1) {
+ dev->features |= NETIF_F_SG;
+ if (USE_HW_TCPUDP_CHECKSUM)
+ dev->features |= NETIF_F_IP_CSUM;
+ }
/* We do our own locking, Linux doesn't need to */
dev->features |= NETIF_F_LLTX;
extern void octeon_mdiobus_force_mod_depencency(void);
-/**
- * Module/ driver initialization. Creates the linux network
- * devices.
- *
- * Returns Zero on success
- */
static int __init cvm_oct_init_module(void)
{
int num_interfaces;
else
cvm_oct_mac_addr_offset = 0;
- cvm_oct_proc_initialize();
- cvm_oct_rx_initialize();
+ cvm_oct_poll_queue = create_singlethread_workqueue("octeon-ethernet");
+ if (cvm_oct_poll_queue == NULL) {
+ pr_err("octeon-ethernet: Cannot create workqueue");
+ return -ENOMEM;
+ }
+
cvm_oct_configure_common_hw();
cvmx_helper_initialize_packet_io_global();
*/
cvmx_fau_atomic_write32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
+ /* Initialize the FAU used for counting tx SKBs that need to be freed */
+ cvmx_fau_atomic_write32(FAU_TOTAL_TX_TO_CLEAN, 0);
+
if ((pow_send_group != -1)) {
struct net_device *dev;
pr_info("\tConfiguring device for POW only access\n");
if (dev) {
/* Initialize the device private structure. */
struct octeon_ethernet *priv = netdev_priv(dev);
- memset(priv, 0, sizeof(struct octeon_ethernet));
dev->netdev_ops = &cvm_oct_pow_netdev_ops;
priv->imode = CVMX_HELPER_INTERFACE_MODE_DISABLED;
skb_queue_head_init(&priv->tx_free_list[qos]);
if (register_netdev(dev) < 0) {
- pr_err("Failed to register ethernet "
- "device for POW\n");
+ pr_err("Failed to register ethernet device for POW\n");
kfree(dev);
} else {
cvm_oct_device[CVMX_PIP_NUM_INPUT_PORTS] = dev;
- pr_info("%s: POW send group %d, receive "
- "group %d\n",
- dev->name, pow_send_group,
- pow_receive_group);
+ pr_info("%s: POW send group %d, receive group %d\n",
+ dev->name, pow_send_group,
+ pow_receive_group);
}
} else {
- pr_err("Failed to allocate ethernet device "
- "for POW\n");
+ pr_err("Failed to allocate ethernet device for POW\n");
}
}
struct net_device *dev =
alloc_etherdev(sizeof(struct octeon_ethernet));
if (!dev) {
- pr_err("Failed to allocate ethernet device "
- "for port %d\n", port);
+ pr_err("Failed to allocate ethernet device for port %d\n", port);
continue;
}
- if (disable_core_queueing)
- dev->tx_queue_len = 0;
/* Initialize the device private structure. */
priv = netdev_priv(dev);
- memset(priv, 0, sizeof(struct octeon_ethernet));
+ INIT_DELAYED_WORK(&priv->port_periodic_work,
+ cvm_oct_periodic_worker);
priv->imode = imode;
priv->port = port;
priv->queue = cvmx_pko_get_base_queue(priv->port);
fau -=
cvmx_pko_get_num_queues(priv->port) *
sizeof(uint32_t);
+ queue_delayed_work(cvm_oct_poll_queue,
+ &priv->port_periodic_work, HZ);
}
}
}
- if (INTERRUPT_LIMIT) {
- /*
- * Set the POW timer rate to give an interrupt at most
- * INTERRUPT_LIMIT times per second.
- */
- cvmx_write_csr(CVMX_POW_WQ_INT_PC,
- octeon_bootinfo->eclock_hz / (INTERRUPT_LIMIT *
- 16 * 256) << 8);
+ cvm_oct_tx_initialize();
+ cvm_oct_rx_initialize();
- /*
- * Enable POW timer interrupt. It will count when
- * there are packets available.
- */
- cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group),
- 0x1ful << 24);
- } else {
- /* Enable POW interrupt when our port has at least one packet */
- cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), 0x1001);
- }
+ /*
+ * 150 uS: about 10 1500-byte packtes at 1GE.
+ */
+ cvm_oct_tx_poll_interval = 150 * (octeon_get_clock_rate() / 1000000);
- /* Enable the poll timer for checking RGMII status */
- init_timer(&cvm_oct_poll_timer);
- cvm_oct_poll_timer.data = 0;
- cvm_oct_poll_timer.function = cvm_do_timer;
- mod_timer(&cvm_oct_poll_timer, jiffies + HZ);
+ queue_delayed_work(cvm_oct_poll_queue, &cvm_oct_rx_refill_work, HZ);
return 0;
}
-/**
- * Module / driver shutdown
- *
- * Returns Zero on success
- */
static void __exit cvm_oct_cleanup_module(void)
{
int port;
/* Free the interrupt handler */
free_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group, cvm_oct_device);
- del_timer(&cvm_oct_poll_timer);
+ atomic_inc_return(&cvm_oct_poll_queue_stopping);
+ cancel_delayed_work_sync(&cvm_oct_rx_refill_work);
+
cvm_oct_rx_shutdown();
+ cvm_oct_tx_shutdown();
+
cvmx_pko_disable();
/* Free the ethernet devices */
for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) {
if (cvm_oct_device[port]) {
- cvm_oct_tx_shutdown(cvm_oct_device[port]);
- unregister_netdev(cvm_oct_device[port]);
- kfree(cvm_oct_device[port]);
+ struct net_device *dev = cvm_oct_device[port];
+ struct octeon_ethernet *priv = netdev_priv(dev);
+ cancel_delayed_work_sync(&priv->port_periodic_work);
+
+ cvm_oct_tx_shutdown_dev(dev);
+ unregister_netdev(dev);
+ kfree(dev);
cvm_oct_device[port] = NULL;
}
}
+ destroy_workqueue(cvm_oct_poll_queue);
+
cvmx_pko_shutdown();
- cvm_oct_proc_shutdown();
cvmx_ipd_free_ptr();
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
- * Copyright (c) 2003-2007 Cavium Networks
+ * Copyright (c) 2003-2010 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
uint64_t link_info;
/* Called periodically to check link status */
void (*poll) (struct net_device *dev);
+ struct delayed_work port_periodic_work;
+ struct work_struct port_work; /* may be unused. */
};
-/**
- * Free a work queue entry received in a intercept callback.
- *
- * @work_queue_entry:
- * Work queue entry to free
- * Returns Zero on success, Negative on failure.
- */
int cvm_oct_free_work(void *work_queue_entry);
-/**
- * Transmit a work queue entry out of the ethernet port. Both
- * the work queue entry and the packet data can optionally be
- * freed. The work will be freed on error as well.
- *
- * @dev: Device to transmit out.
- * @work_queue_entry:
- * Work queue entry to send
- * @do_free: True if the work queue entry and packet data should be
- * freed. If false, neither will be freed.
- * @qos: Index into the queues for this port to transmit on. This
- * is used to implement QoS if their are multiple queues per
- * port. This parameter must be between 0 and the number of
- * queues per port minus 1. Values outside of this range will
- * be change to zero.
- *
- * Returns Zero on success, negative on failure.
- */
-int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
- int do_free, int qos);
-
-/**
- * Transmit a work queue entry out of the ethernet port. Both
- * the work queue entry and the packet data can optionally be
- * freed. The work will be freed on error as well. This simply
- * wraps cvmx_oct_transmit_qos() for backwards compatability.
- *
- * @dev: Device to transmit out.
- * @work_queue_entry:
- * Work queue entry to send
- * @do_free: True if the work queue entry and packet data should be
- * freed. If false, neither will be freed.
- *
- * Returns Zero on success, negative on failure.
- */
-static inline int cvm_oct_transmit(struct net_device *dev,
- void *work_queue_entry, int do_free)
-{
- return cvm_oct_transmit_qos(dev, work_queue_entry, do_free, 0);
-}
-
extern int cvm_oct_rgmii_init(struct net_device *dev);
extern void cvm_oct_rgmii_uninit(struct net_device *dev);
extern int cvm_oct_rgmii_open(struct net_device *dev);
extern int pow_receive_group;
extern char pow_send_list[];
extern struct net_device *cvm_oct_device[];
+extern struct workqueue_struct *cvm_oct_poll_queue;
+extern atomic_t cvm_oct_poll_queue_stopping;
+extern u64 cvm_oct_tx_poll_interval;
+
+extern int max_rx_cpus;
+extern int rx_napi_weight;
#endif
* Author: Boyod boyod.yang@siliconmotion.com.cn
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* Author: Ge Wang, gewang@siliconmotion.com
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* Boyod boyod.yang@siliconmotion.com.cn
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* Boyod boyod.yang@siliconmotion.com.cn
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <linux/clk.h>
#include <asm/addrspace.h>
#include <asm/mach-ar7/ar7.h>
/* Pointer to the remapped WDT IO space */
static struct ar7_wdt *ar7_wdt;
+static struct clk *vbus_clk;
+
static void ar7_wdt_kick(u32 value)
{
WRITE_REG(ar7_wdt->kick_lock, 0x5555);
static void ar7_wdt_update_margin(int new_margin)
{
u32 change;
+ u32 vbus_rate;
- change = new_margin * (ar7_vbus_freq() / prescale_value);
+ vbus_rate = clk_get_rate(vbus_clk);
+ change = new_margin * (vbus_rate / prescale_value);
if (change < 1)
change = 1;
if (change > 0xffff)
change = 0xffff;
ar7_wdt_change(change);
- margin = change * prescale_value / ar7_vbus_freq();
+ margin = change * prescale_value / vbus_rate;
printk(KERN_INFO DRVNAME
": timer margin %d seconds (prescale %d, change %d, freq %d)\n",
- margin, prescale_value, change, ar7_vbus_freq());
+ margin, prescale_value, change, vbus_rate);
}
static void ar7_wdt_enable_wdt(void)
goto out_mem_region;
}
+ vbus_clk = clk_get(NULL, "vbus");
+ if (IS_ERR(vbus_clk)) {
+ printk(KERN_ERR DRVNAME ": could not get vbus clock\n");
+ rc = PTR_ERR(vbus_clk);
+ goto out_mem_region;
+ }
+
ar7_wdt_disable_wdt();
ar7_wdt_prescale(prescale_value);
ar7_wdt_update_margin(margin);
/* Put two buffers on the ring to get things started.
*/
for (i=0; i<2; i++) {
- au1xxx_dbdma_put_dest(db->dmanr, db->nextIn, db->dma_fragsize);
+ au1xxx_dbdma_put_dest(db->dmanr, virt_to_phys(db->nextIn),
+ db->dma_fragsize, DDMA_FLAGS_IE);
db->nextIn += db->dma_fragsize;
if (db->nextIn >= db->rawbuf + db->dmasize)
db->dma_qcount--;
if (db->count >= db->fragsize) {
- if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
- db->fragsize) == 0) {
+ if (au1xxx_dbdma_put_source(db->dmanr,
+ virt_to_phys(db->nextOut), db->fragsize,
+ DDMA_FLAGS_IE) == 0) {
err("qcount < 2 and no ring room!");
}
db->nextOut += db->fragsize;
/* Put a new empty buffer on the destination DMA.
*/
- au1xxx_dbdma_put_dest(dp->dmanr, dp->nextIn, dp->dma_fragsize);
+ au1xxx_dbdma_put_dest(dp->dmanr, virt_to_phys(dp->nextIn),
+ dp->dma_fragsize, DDMA_FLAGS_IE);
dp->nextIn += dp->dma_fragsize;
if (dp->nextIn >= dp->rawbuf + dp->dmasize)
* we know the dma has stopped.
*/
while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) {
- if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
- db->fragsize) == 0) {
+ if (au1xxx_dbdma_put_source(db->dmanr,
+ virt_to_phys(db->nextOut), db->fragsize,
+ DDMA_FLAGS_IE) == 0) {
err("qcount < 2 and no ring room!");
}
db->nextOut += db->fragsize;
##
## Boards
##
-config SND_SOC_SAMPLE_PSC_AC97
- tristate "Sample Au12x0/Au1550 PSC AC97 sound machine"
+config SND_SOC_DB1200
+ tristate "DB1200 AC97+I2S audio support"
depends on SND_SOC_AU1XPSC
select SND_SOC_AU1XPSC_AC97
select SND_SOC_AC97_CODEC
+ select SND_SOC_AU1XPSC_I2S
+ select SND_SOC_WM8731
help
- This is a sample AC97 sound machine for use in Au12x0/Au1550
- based systems which have audio on PSC1 (e.g. Db1200 demoboard).
+ Select this option to enable audio (AC97 or I2S) on the
+ Alchemy/AMD/RMI DB1200 demoboard.
obj-$(CONFIG_SND_SOC_AU1XPSC_AC97) += snd-soc-au1xpsc-ac97.o
# Boards
-snd-soc-sample-ac97-objs := sample-ac97.o
+snd-soc-db1200-objs := db1200.o
-obj-$(CONFIG_SND_SOC_SAMPLE_PSC_AC97) += snd-soc-sample-ac97.o
+obj-$(CONFIG_SND_SOC_DB1200) += snd-soc-db1200.o
--- /dev/null
+/*
+ * DB1200 ASoC audio fabric support code.
+ *
+ * (c) 2008-9 Manuel Lauss <manuel.lauss@gmail.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../codecs/ac97.h"
+#include "../codecs/wm8731.h"
+#include "psc.h"
+
+/*------------------------- AC97 PART ---------------------------*/
+
+static struct snd_soc_dai_link db1200_ac97_dai = {
+ .name = "AC97",
+ .stream_name = "AC97 HiFi",
+ .cpu_dai = &au1xpsc_ac97_dai,
+ .codec_dai = &ac97_dai,
+};
+
+static struct snd_soc_card db1200_ac97_machine = {
+ .name = "DB1200_AC97",
+ .dai_link = &db1200_ac97_dai,
+ .num_links = 1,
+ .platform = &au1xpsc_soc_platform,
+};
+
+static struct snd_soc_device db1200_ac97_devdata = {
+ .card = &db1200_ac97_machine,
+ .codec_dev = &soc_codec_dev_ac97,
+};
+
+/*------------------------- I2S PART ---------------------------*/
+
+static int db1200_i2s_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ /* WM8731 has its own 12MHz crystal */
+ snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
+ 12000000, SND_SOC_CLOCK_IN);
+
+ /* codec is bitclock and lrclk master */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_LEFT_J |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ goto out;
+
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_LEFT_J |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ goto out;
+
+ ret = 0;
+out:
+ return ret;
+}
+
+static struct snd_soc_ops db1200_i2s_wm8731_ops = {
+ .startup = db1200_i2s_startup,
+};
+
+static struct snd_soc_dai_link db1200_i2s_dai = {
+ .name = "WM8731",
+ .stream_name = "WM8731 PCM",
+ .cpu_dai = &au1xpsc_i2s_dai,
+ .codec_dai = &wm8731_dai,
+ .ops = &db1200_i2s_wm8731_ops,
+};
+
+static struct snd_soc_card db1200_i2s_machine = {
+ .name = "DB1200_I2S",
+ .dai_link = &db1200_i2s_dai,
+ .num_links = 1,
+ .platform = &au1xpsc_soc_platform,
+};
+
+static struct snd_soc_device db1200_i2s_devdata = {
+ .card = &db1200_i2s_machine,
+ .codec_dev = &soc_codec_dev_wm8731,
+};
+
+/*------------------------- COMMON PART ---------------------------*/
+
+static struct platform_device *db1200_asoc_dev;
+
+static int __init db1200_audio_load(void)
+{
+ int ret;
+
+ ret = -ENOMEM;
+ db1200_asoc_dev = platform_device_alloc("soc-audio", -1);
+ if (!db1200_asoc_dev)
+ goto out;
+
+ /* DB1200 board setup set PSC1MUX to preferred audio device */
+ if (bcsr_read(BCSR_RESETS) & BCSR_RESETS_PSC1MUX)
+ platform_set_drvdata(db1200_asoc_dev, &db1200_i2s_devdata);
+ else
+ platform_set_drvdata(db1200_asoc_dev, &db1200_ac97_devdata);
+
+ db1200_ac97_devdata.dev = &db1200_asoc_dev->dev;
+ db1200_i2s_devdata.dev = &db1200_asoc_dev->dev;
+ ret = platform_device_add(db1200_asoc_dev);
+
+ if (ret) {
+ platform_device_put(db1200_asoc_dev);
+ db1200_asoc_dev = NULL;
+ }
+out:
+ return ret;
+}
+
+static void __exit db1200_audio_unload(void)
+{
+ platform_device_unregister(db1200_asoc_dev);
+}
+
+module_init(db1200_audio_load);
+module_exit(db1200_audio_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DB1200 ASoC audio support");
+MODULE_AUTHOR("Manuel Lauss");
struct snd_pcm_substream *substream;
unsigned long curr_period; /* current segment DDMA is working on */
unsigned long q_period; /* queue period(s) */
- unsigned long dma_area; /* address of queued DMA area */
- unsigned long dma_area_s; /* start address of DMA area */
+ dma_addr_t dma_area; /* address of queued DMA area */
+ dma_addr_t dma_area_s; /* start address of DMA area */
unsigned long pos; /* current byte position being played */
unsigned long periods; /* number of SG segments in total */
unsigned long period_bytes; /* size in bytes of one SG segment */
static void au1x_pcm_queue_tx(struct au1xpsc_audio_dmadata *cd)
{
- au1xxx_dbdma_put_source_flags(cd->ddma_chan,
- (void *)phys_to_virt(cd->dma_area),
+ au1xxx_dbdma_put_source(cd->ddma_chan, cd->dma_area,
cd->period_bytes, DDMA_FLAGS_IE);
/* update next-to-queue period */
static void au1x_pcm_queue_rx(struct au1xpsc_audio_dmadata *cd)
{
- au1xxx_dbdma_put_dest_flags(cd->ddma_chan,
- (void *)phys_to_virt(cd->dma_area),
- cd->period_bytes, DDMA_FLAGS_IE);
+ au1xxx_dbdma_put_dest(cd->ddma_chan, cd->dma_area,
+ cd->period_bytes, DDMA_FLAGS_IE);
/* update next-to-queue period */
++cd->q_period;
pcd->substream = substream;
pcd->period_bytes = params_period_bytes(params);
pcd->periods = params_periods(params);
- pcd->dma_area_s = pcd->dma_area = (unsigned long)runtime->dma_addr;
+ pcd->dma_area_s = pcd->dma_area = runtime->dma_addr;
pcd->q_period = 0;
pcd->curr_period = 0;
pcd->pos = 0;
+++ /dev/null
-/*
- * Sample Au12x0/Au1550 PSC AC97 sound machine.
- *
- * Copyright (c) 2007-2008 Manuel Lauss <mano@roarinelk.homelinux.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms outlined in the file COPYING at the root of this
- * source archive.
- *
- * This is a very generic AC97 sound machine driver for boards which
- * have (AC97) audio at PSC1 (e.g. DB1200 demoboards).
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/au1xxx_psc.h>
-#include <asm/mach-au1x00/au1xxx_dbdma.h>
-
-#include "../codecs/ac97.h"
-#include "psc.h"
-
-static int au1xpsc_sample_ac97_init(struct snd_soc_codec *codec)
-{
- snd_soc_dapm_sync(codec);
- return 0;
-}
-
-static struct snd_soc_dai_link au1xpsc_sample_ac97_dai = {
- .name = "AC97",
- .stream_name = "AC97 HiFi",
- .cpu_dai = &au1xpsc_ac97_dai, /* see psc-ac97.c */
- .codec_dai = &ac97_dai, /* see codecs/ac97.c */
- .init = au1xpsc_sample_ac97_init,
- .ops = NULL,
-};
-
-static struct snd_soc_card au1xpsc_sample_ac97_machine = {
- .name = "Au1xxx PSC AC97 Audio",
- .dai_link = &au1xpsc_sample_ac97_dai,
- .num_links = 1,
-};
-
-static struct snd_soc_device au1xpsc_sample_ac97_devdata = {
- .card = &au1xpsc_sample_ac97_machine,
- .platform = &au1xpsc_soc_platform, /* see dbdma2.c */
- .codec_dev = &soc_codec_dev_ac97,
-};
-
-static struct resource au1xpsc_psc1_res[] = {
- [0] = {
- .start = CPHYSADDR(PSC1_BASE_ADDR),
- .end = CPHYSADDR(PSC1_BASE_ADDR) + 0x000fffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
-#ifdef CONFIG_SOC_AU1200
- .start = AU1200_PSC1_INT,
- .end = AU1200_PSC1_INT,
-#elif defined(CONFIG_SOC_AU1550)
- .start = AU1550_PSC1_INT,
- .end = AU1550_PSC1_INT,
-#endif
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = DSCR_CMD0_PSC1_TX,
- .end = DSCR_CMD0_PSC1_TX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = DSCR_CMD0_PSC1_RX,
- .end = DSCR_CMD0_PSC1_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device *au1xpsc_sample_ac97_dev;
-
-static int __init au1xpsc_sample_ac97_load(void)
-{
- int ret;
-
-#ifdef CONFIG_SOC_AU1200
- unsigned long io;
-
- /* modify sys_pinfunc for AC97 on PSC1 */
- io = au_readl(SYS_PINFUNC);
- io |= SYS_PINFUNC_P1C;
- io &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B);
- au_writel(io, SYS_PINFUNC);
- au_sync();
-#endif
-
- ret = -ENOMEM;
-
- /* setup PSC clock source for AC97 part: external clock provided
- * by codec. The psc-ac97.c driver depends on this setting!
- */
- au_writel(PSC_SEL_CLK_SERCLK, PSC1_BASE_ADDR + PSC_SEL_OFFSET);
- au_sync();
-
- au1xpsc_sample_ac97_dev = platform_device_alloc("soc-audio", -1);
- if (!au1xpsc_sample_ac97_dev)
- goto out;
-
- au1xpsc_sample_ac97_dev->resource =
- kmemdup(au1xpsc_psc1_res, sizeof(struct resource) *
- ARRAY_SIZE(au1xpsc_psc1_res), GFP_KERNEL);
- au1xpsc_sample_ac97_dev->num_resources = ARRAY_SIZE(au1xpsc_psc1_res);
- au1xpsc_sample_ac97_dev->id = 1;
-
- platform_set_drvdata(au1xpsc_sample_ac97_dev,
- &au1xpsc_sample_ac97_devdata);
- au1xpsc_sample_ac97_devdata.dev = &au1xpsc_sample_ac97_dev->dev;
- ret = platform_device_add(au1xpsc_sample_ac97_dev);
-
- if (ret) {
- platform_device_put(au1xpsc_sample_ac97_dev);
- au1xpsc_sample_ac97_dev = NULL;
- }
-
-out:
- return ret;
-}
-
-static void __exit au1xpsc_sample_ac97_exit(void)
-{
- platform_device_unregister(au1xpsc_sample_ac97_dev);
-}
-
-module_init(au1xpsc_sample_ac97_load);
-module_exit(au1xpsc_sample_ac97_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Au1xxx PSC sample AC97 machine");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
projects / deliverable / linux.git / commitdiff
