V4L/DVB (13021): go7007: Fix whitespace and line lengths

Trailing whitespace is removed.
Source lines wrap at 80 columns.

Signed-off-by: Pete Eberlein <pete@sensoray.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/staging/go7007/go7007-usb.c b/drivers/staging/go7007/go7007-usb.c
index ff4fb36d907d5678430c2f96371141b70acb2da3..ecaa3c989cf45e5042742128ee786db2502faf41 100644 (file)
--- a/drivers/staging/go7007/go7007-usb.c
+++ b/drivers/staging/go7007/go7007-usb.c
@@ -33,7 +33,8 @@
 
 static unsigned int assume_endura;
 module_param(assume_endura, int, 0644);
-MODULE_PARM_DESC(assume_endura, "when probing fails, hardware is a Pelco Endura");
+MODULE_PARM_DESC(assume_endura, "when probing fails, "
+                               "hardware is a Pelco Endura");
 
 /* #define GO7007_USB_DEBUG */
 /* #define GO7007_I2C_DEBUG */ /* for debugging the EZ-USB I2C adapter */
@@ -44,12 +45,12 @@ MODULE_PARM_DESC(assume_endura, "when probing fails, hardware is a Pelco Endura"
 
 /*
  * Pipes on EZ-USB interface:
- *     0 snd - Control
- *     0 rcv - Control
- *     2 snd - Download firmware (control)
- *     4 rcv - Read Interrupt (interrupt)
- *     6 rcv - Read Video (bulk)
- *     8 rcv - Read Audio (bulk)
+ *     0 snd - Control
+ *     0 rcv - Control
+ *     2 snd - Download firmware (control)
+ *     4 rcv - Read Interrupt (interrupt)
+ *     6 rcv - Read Video (bulk)
+ *     8 rcv - Read Audio (bulk)
  */
 
 #define GO7007_USB_EZUSB               (1<<0)
@@ -97,7 +98,7 @@ static struct go7007_usb_board board_matrix_ii = {
                        },
                },
                .num_inputs      = 2,
-               .inputs          = {
+               .inputs          = {
                        {
                                .video_input    = 0,
                                .name           = "Composite",
@@ -134,7 +135,7 @@ static struct go7007_usb_board board_matrix_reload = {
                        },
                },
                .num_inputs      = 2,
-               .inputs          = {
+               .inputs          = {
                        {
                                .video_input    = 0,
                                .name           = "Composite",
@@ -172,7 +173,7 @@ static struct go7007_usb_board board_star_trek = {
                        },
                },
                .num_inputs      = 2,
-               .inputs          = {
+               .inputs          = {
                        {
                                .video_input    = 1,
                        /*      .audio_input    = AUDIO_EXTERN, */
@@ -228,7 +229,7 @@ static struct go7007_usb_board board_px_tv402u = {
                        },
                },
                .num_inputs      = 3,
-               .inputs          = {
+               .inputs          = {
                        {
                                .video_input    = 1,
                                .audio_input    = TVAUDIO_INPUT_EXTERN,
@@ -276,7 +277,7 @@ static struct go7007_usb_board board_xmen = {
                        },
                },
                .num_inputs       = 1,
-               .inputs           = {
+               .inputs           = {
                        {
                                .name           = "Camera",
                        },
@@ -309,7 +310,7 @@ static struct go7007_usb_board board_matrix_revolution = {
                        },
                },
                .num_inputs      = 2,
-               .inputs          = {
+               .inputs          = {
                        {
                                .video_input    = 2,
                                .name           = "Composite",
@@ -341,7 +342,7 @@ static struct go7007_usb_board board_lifeview_lr192 = {
                                        GO7007_SENSOR_SCALING,
                .num_i2c_devs    = 0,
                .num_inputs      = 1,
-               .inputs          = {
+               .inputs          = {
                        {
                                .video_input    = 0,
                                .name           = "Composite",
@@ -367,7 +368,7 @@ static struct go7007_usb_board board_endura = {
                .sensor_h_offset = 8,
                .num_i2c_devs    = 0,
                .num_inputs      = 1,
-               .inputs          = {
+               .inputs          = {
                        {
                                .name           = "Camera",
                        },
@@ -399,7 +400,7 @@ static struct go7007_usb_board board_adlink_mpg24 = {
                        },
                },
                .num_inputs      = 1,
-               .inputs          = {
+               .inputs          = {
                        {
                                .name           = "Composite",
                        },
@@ -430,7 +431,7 @@ static struct go7007_usb_board board_sensoray_2250 = {
                        },
                },
                .num_inputs      = 2,
-               .inputs          = {
+               .inputs          = {
                        {
                                .video_input    = 0,
                                .name           = "Composite",
@@ -741,7 +742,8 @@ static void go7007_usb_read_video_pipe_complete(struct urb *urb)
                return;
        }
        if (status) {
-               printk(KERN_ERR "go7007-usb: error in video pipe: %d\n", status);
+               printk(KERN_ERR "go7007-usb: error in video pipe: %d\n",
+                       status);
                return;
        }
        if (urb->actual_length != urb->transfer_buffer_length) {
@@ -762,7 +764,8 @@ static void go7007_usb_read_audio_pipe_complete(struct urb *urb)
        if (!go->streaming)
                return;
        if (status) {
-               printk(KERN_ERR "go7007-usb: error in audio pipe: %d\n", status);
+               printk(KERN_ERR "go7007-usb: error in audio pipe: %d\n",
+                       status);
                return;
        }
        if (urb->actual_length != urb->transfer_buffer_length) {
@@ -1017,7 +1020,7 @@ static int go7007_usb_probe(struct usb_interface *intf,
                break;
        case GO7007_BOARDID_SENSORAY_2250:
                printk(KERN_INFO "Sensoray 2250 found\n");
-               name = "Sensoray 2250/2251\n";
+               name = "Sensoray 2250/2251";
                board = &board_sensoray_2250;
                break;
        default:
@@ -1096,7 +1099,7 @@ static int go7007_usb_probe(struct usb_interface *intf,
                                usb->board = board = &board_endura;
                                go->board_info = &board->main_info;
                                strncpy(go->name, "Pelco Endura",
-                                               sizeof(go->name));
+                                       sizeof(go->name));
                        } else {
                                u16 channel;
 
@@ -1154,8 +1157,7 @@ static int go7007_usb_probe(struct usb_interface *intf,
                 * to the EZ-USB GPIO output pins */
                if (go7007_usb_vendor_request(go, 0x40, 0x7f02, 0,
                                        NULL, 0, 0) < 0) {
-                       printk(KERN_ERR
-                               "go7007-usb: GPIO write failed!\n");
+                       printk(KERN_ERR "go7007-usb: GPIO write failed!\n");
                        goto initfail;
                }
        }