+++ /dev/null
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/kgdb.h>
-#include <linux/topology.h>
-#include <linux/delay.h>
-#include <linux/smp.h>
-#include <linux/percpu.h>
-#include <asm/i387.h>
-#include <asm/msr.h>
-#include <asm/io.h>
-#include <asm/linkage.h>
-#include <asm/mmu_context.h>
-#include <asm/mtrr.h>
-#include <asm/mce.h>
-#include <asm/pat.h>
-#include <asm/asm.h>
-#include <asm/numa.h>
-#ifdef CONFIG_X86_LOCAL_APIC
-#include <asm/mpspec.h>
-#include <asm/apic.h>
-#include <mach_apic.h>
-#include <asm/genapic.h>
-#endif
-
-#include <asm/pda.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/desc.h>
-#include <asm/atomic.h>
-#include <asm/proto.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-
-#include "cpu.h"
-
-static struct cpu_dev *this_cpu __cpuinitdata;
-
-#ifdef CONFIG_X86_64
-/* We need valid kernel segments for data and code in long mode too
- * IRET will check the segment types kkeil 2000/10/28
- * Also sysret mandates a special GDT layout
- */
-/* The TLS descriptors are currently at a different place compared to i386.
- Hopefully nobody expects them at a fixed place (Wine?) */
-DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
- [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
- [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
- [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
- [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
- [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
- [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
-} };
-#else
-DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
- [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } },
- [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } },
- [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } },
- [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff200 } } },
- /*
- * Segments used for calling PnP BIOS have byte granularity.
- * They code segments and data segments have fixed 64k limits,
- * the transfer segment sizes are set at run time.
- */
- /* 32-bit code */
- [GDT_ENTRY_PNPBIOS_CS32] = { { { 0x0000ffff, 0x00409a00 } } },
- /* 16-bit code */
- [GDT_ENTRY_PNPBIOS_CS16] = { { { 0x0000ffff, 0x00009a00 } } },
- /* 16-bit data */
- [GDT_ENTRY_PNPBIOS_DS] = { { { 0x0000ffff, 0x00009200 } } },
- /* 16-bit data */
- [GDT_ENTRY_PNPBIOS_TS1] = { { { 0x00000000, 0x00009200 } } },
- /* 16-bit data */
- [GDT_ENTRY_PNPBIOS_TS2] = { { { 0x00000000, 0x00009200 } } },
- /*
- * The APM segments have byte granularity and their bases
- * are set at run time. All have 64k limits.
- */
- /* 32-bit code */
- [GDT_ENTRY_APMBIOS_BASE] = { { { 0x0000ffff, 0x00409a00 } } },
- /* 16-bit code */
- [GDT_ENTRY_APMBIOS_BASE+1] = { { { 0x0000ffff, 0x00009a00 } } },
- /* data */
- [GDT_ENTRY_APMBIOS_BASE+2] = { { { 0x0000ffff, 0x00409200 } } },
-
- [GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } },
- [GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } },
-} };
-#endif
-EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
-
-#ifdef CONFIG_X86_32
-static int cachesize_override __cpuinitdata = -1;
-static int disable_x86_serial_nr __cpuinitdata = 1;
-
-static int __init cachesize_setup(char *str)
-{
- get_option(&str, &cachesize_override);
- return 1;
-}
-__setup("cachesize=", cachesize_setup);
-
-static int __init x86_fxsr_setup(char *s)
-{
- setup_clear_cpu_cap(X86_FEATURE_FXSR);
- setup_clear_cpu_cap(X86_FEATURE_XMM);
- return 1;
-}
-__setup("nofxsr", x86_fxsr_setup);
-
-static int __init x86_sep_setup(char *s)
-{
- setup_clear_cpu_cap(X86_FEATURE_SEP);
- return 1;
-}
-__setup("nosep", x86_sep_setup);
-
-/* Standard macro to see if a specific flag is changeable */
-static inline int flag_is_changeable_p(u32 flag)
-{
- u32 f1, f2;
-
- asm("pushfl\n\t"
- "pushfl\n\t"
- "popl %0\n\t"
- "movl %0,%1\n\t"
- "xorl %2,%0\n\t"
- "pushl %0\n\t"
- "popfl\n\t"
- "pushfl\n\t"
- "popl %0\n\t"
- "popfl\n\t"
- : "=&r" (f1), "=&r" (f2)
- : "ir" (flag));
-
- return ((f1^f2) & flag) != 0;
-}
-
-/* Probe for the CPUID instruction */
-static int __cpuinit have_cpuid_p(void)
-{
- return flag_is_changeable_p(X86_EFLAGS_ID);
-}
-
-static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
-{
- if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) {
- /* Disable processor serial number */
- unsigned long lo, hi;
- rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
- lo |= 0x200000;
- wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
- printk(KERN_NOTICE "CPU serial number disabled.\n");
- clear_cpu_cap(c, X86_FEATURE_PN);
-
- /* Disabling the serial number may affect the cpuid level */
- c->cpuid_level = cpuid_eax(0);
- }
-}
-
-static int __init x86_serial_nr_setup(char *s)
-{
- disable_x86_serial_nr = 0;
- return 1;
-}
-__setup("serialnumber", x86_serial_nr_setup);
-#else
-static inline int flag_is_changeable_p(u32 flag)
-{
- return 1;
-}
-/* Probe for the CPUID instruction */
-static inline int have_cpuid_p(void)
-{
- return 1;
-}
-static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
-{
-}
-#endif
-
-/*
- * Naming convention should be: <Name> [(<Codename>)]
- * This table only is used unless init_<vendor>() below doesn't set it;
- * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used
- *
- */
-
-/* Look up CPU names by table lookup. */
-static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
-{
- struct cpu_model_info *info;
-
- if (c->x86_model >= 16)
- return NULL; /* Range check */
-
- if (!this_cpu)
- return NULL;
-
- info = this_cpu->c_models;
-
- while (info && info->family) {
- if (info->family == c->x86)
- return info->model_names[c->x86_model];
- info++;
- }
- return NULL; /* Not found */
-}
-
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
-
-/* Current gdt points %fs at the "master" per-cpu area: after this,
- * it's on the real one. */
-void switch_to_new_gdt(void)
-{
- struct desc_ptr gdt_descr;
-
- gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
- gdt_descr.size = GDT_SIZE - 1;
- load_gdt(&gdt_descr);
-#ifdef CONFIG_X86_32
- asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory");
-#endif
-}
-
-static struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
-
-static void __cpuinit default_init(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_X86_64
- display_cacheinfo(c);
-#else
- /* Not much we can do here... */
- /* Check if at least it has cpuid */
- if (c->cpuid_level == -1) {
- /* No cpuid. It must be an ancient CPU */
- if (c->x86 == 4)
- strcpy(c->x86_model_id, "486");
- else if (c->x86 == 3)
- strcpy(c->x86_model_id, "386");
- }
-#endif
-}
-
-static struct cpu_dev __cpuinitdata default_cpu = {
- .c_init = default_init,
- .c_vendor = "Unknown",
- .c_x86_vendor = X86_VENDOR_UNKNOWN,
-};
-
-int __cpuinit get_model_name(struct cpuinfo_x86 *c)
-{
- unsigned int *v;
- char *p, *q;
-
- if (c->extended_cpuid_level < 0x80000004)
- return 0;
-
- v = (unsigned int *) c->x86_model_id;
- cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
- cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
- cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
- c->x86_model_id[48] = 0;
-
- /* Intel chips right-justify this string for some dumb reason;
- undo that brain damage */
- p = q = &c->x86_model_id[0];
- while (*p == ' ')
- p++;
- if (p != q) {
- while (*p)
- *q++ = *p++;
- while (q <= &c->x86_model_id[48])
- *q++ = '\0'; /* Zero-pad the rest */
- }
-
- return 1;
-}
-
-void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
-{
- unsigned int n, dummy, ebx, ecx, edx, l2size;
-
- n = c->extended_cpuid_level;
-
- if (n >= 0x80000005) {
- cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
- printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
- edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
- c->x86_cache_size = (ecx>>24) + (edx>>24);
-#ifdef CONFIG_X86_64
- /* On K8 L1 TLB is inclusive, so don't count it */
- c->x86_tlbsize = 0;
-#endif
- }
-
- if (n < 0x80000006) /* Some chips just has a large L1. */
- return;
-
- cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
- l2size = ecx >> 16;
-
-#ifdef CONFIG_X86_64
- c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
-#else
- /* do processor-specific cache resizing */
- if (this_cpu->c_size_cache)
- l2size = this_cpu->c_size_cache(c, l2size);
-
- /* Allow user to override all this if necessary. */
- if (cachesize_override != -1)
- l2size = cachesize_override;
-
- if (l2size == 0)
- return; /* Again, no L2 cache is possible */
-#endif
-
- c->x86_cache_size = l2size;
-
- printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
- l2size, ecx & 0xFF);
-}
-
-void __cpuinit detect_ht(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_X86_HT
- u32 eax, ebx, ecx, edx;
- int index_msb, core_bits;
-
- if (!cpu_has(c, X86_FEATURE_HT))
- return;
-
- if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
- goto out;
-
- if (cpu_has(c, X86_FEATURE_XTOPOLOGY))
- return;
-
- cpuid(1, &eax, &ebx, &ecx, &edx);
-
- smp_num_siblings = (ebx & 0xff0000) >> 16;
-
- if (smp_num_siblings == 1) {
- printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
- } else if (smp_num_siblings > 1) {
-
- if (smp_num_siblings > NR_CPUS) {
- printk(KERN_WARNING "CPU: Unsupported number of siblings %d",
- smp_num_siblings);
- smp_num_siblings = 1;
- return;
- }
-
- index_msb = get_count_order(smp_num_siblings);
-#ifdef CONFIG_X86_64
- c->phys_proc_id = phys_pkg_id(index_msb);
-#else
- c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
-#endif
-
- smp_num_siblings = smp_num_siblings / c->x86_max_cores;
-
- index_msb = get_count_order(smp_num_siblings);
-
- core_bits = get_count_order(c->x86_max_cores);
-
-#ifdef CONFIG_X86_64
- c->cpu_core_id = phys_pkg_id(index_msb) &
- ((1 << core_bits) - 1);
-#else
- c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
- ((1 << core_bits) - 1);
-#endif
- }
-
-out:
- if ((c->x86_max_cores * smp_num_siblings) > 1) {
- printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
- c->phys_proc_id);
- printk(KERN_INFO "CPU: Processor Core ID: %d\n",
- c->cpu_core_id);
- }
-#endif
-}
-
-static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
-{
- char *v = c->x86_vendor_id;
- int i;
- static int printed;
-
- for (i = 0; i < X86_VENDOR_NUM; i++) {
- if (!cpu_devs[i])
- break;
-
- if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
- (cpu_devs[i]->c_ident[1] &&
- !strcmp(v, cpu_devs[i]->c_ident[1]))) {
- this_cpu = cpu_devs[i];
- c->x86_vendor = this_cpu->c_x86_vendor;
- return;
- }
- }
-
- if (!printed) {
- printed++;
- printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
- printk(KERN_ERR "CPU: Your system may be unstable.\n");
- }
-
- c->x86_vendor = X86_VENDOR_UNKNOWN;
- this_cpu = &default_cpu;
-}
-
-void __cpuinit cpu_detect(struct cpuinfo_x86 *c)
-{
- /* Get vendor name */
- cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
- (unsigned int *)&c->x86_vendor_id[0],
- (unsigned int *)&c->x86_vendor_id[8],
- (unsigned int *)&c->x86_vendor_id[4]);
-
- c->x86 = 4;
- /* Intel-defined flags: level 0x00000001 */
- if (c->cpuid_level >= 0x00000001) {
- u32 junk, tfms, cap0, misc;
- cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
- c->x86 = (tfms >> 8) & 0xf;
- c->x86_model = (tfms >> 4) & 0xf;
- c->x86_mask = tfms & 0xf;
- if (c->x86 == 0xf)
- c->x86 += (tfms >> 20) & 0xff;
- if (c->x86 >= 0x6)
- c->x86_model += ((tfms >> 16) & 0xf) << 4;
- if (cap0 & (1<<19)) {
- c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
- c->x86_cache_alignment = c->x86_clflush_size;
- }
- }
-}
-
-static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
-{
- u32 tfms, xlvl;
- u32 ebx;
-
- /* Intel-defined flags: level 0x00000001 */
- if (c->cpuid_level >= 0x00000001) {
- u32 capability, excap;
- cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
- c->x86_capability[0] = capability;
- c->x86_capability[4] = excap;
- }
-
- /* AMD-defined flags: level 0x80000001 */
- xlvl = cpuid_eax(0x80000000);
- c->extended_cpuid_level = xlvl;
- if ((xlvl & 0xffff0000) == 0x80000000) {
- if (xlvl >= 0x80000001) {
- c->x86_capability[1] = cpuid_edx(0x80000001);
- c->x86_capability[6] = cpuid_ecx(0x80000001);
- }
- }
-
-#ifdef CONFIG_X86_64
- /* Transmeta-defined flags: level 0x80860001 */
- xlvl = cpuid_eax(0x80860000);
- if ((xlvl & 0xffff0000) == 0x80860000) {
- /* Don't set x86_cpuid_level here for now to not confuse. */
- if (xlvl >= 0x80860001)
- c->x86_capability[2] = cpuid_edx(0x80860001);
- }
-
- if (c->extended_cpuid_level >= 0x80000007)
- c->x86_power = cpuid_edx(0x80000007);
-
- if (c->extended_cpuid_level >= 0x80000008) {
- u32 eax = cpuid_eax(0x80000008);
-
- c->x86_virt_bits = (eax >> 8) & 0xff;
- c->x86_phys_bits = eax & 0xff;
- }
-#endif
-}
-/*
- * Do minimum CPU detection early.
- * Fields really needed: vendor, cpuid_level, family, model, mask,
- * cache alignment.
- * The others are not touched to avoid unwanted side effects.
- *
- * WARNING: this function is only called on the BP. Don't add code here
- * that is supposed to run on all CPUs.
- */
-static void __init early_identify_cpu(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_X86_64
- c->x86_clflush_size = 64;
-#else
- c->x86_clflush_size = 32;
-#endif
- c->x86_cache_alignment = c->x86_clflush_size;
-
- if (!have_cpuid_p())
- return;
-
- memset(&c->x86_capability, 0, sizeof c->x86_capability);
-
- c->extended_cpuid_level = 0;
-
- cpu_detect(c);
-
- get_cpu_vendor(c);
-
- get_cpu_cap(c);
-
- if (this_cpu->c_early_init)
- this_cpu->c_early_init(c);
-
- validate_pat_support(c);
-}
-
-void __init early_cpu_init(void)
-{
- struct cpu_dev **cdev;
- int count = 0;
-
- printk("KERNEL supported cpus:\n");
- for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) {
- struct cpu_dev *cpudev = *cdev;
- unsigned int j;
-
- if (count >= X86_VENDOR_NUM)
- break;
- cpu_devs[count] = cpudev;
- count++;
-
- for (j = 0; j < 2; j++) {
- if (!cpudev->c_ident[j])
- continue;
- printk(" %s %s\n", cpudev->c_vendor,
- cpudev->c_ident[j]);
- }
- }
-
- early_identify_cpu(&boot_cpu_data);
-}
-
-/*
- * The NOPL instruction is supposed to exist on all CPUs with
- * family >= 6, unfortunately, that's not true in practice because
- * of early VIA chips and (more importantly) broken virtualizers that
- * are not easy to detect. Hence, probe for it based on first
- * principles.
- *
- * Note: no 64-bit chip is known to lack these, but put the code here
- * for consistency with 32 bits, and to make it utterly trivial to
- * diagnose the problem should it ever surface.
- */
-static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
-{
- const u32 nopl_signature = 0x888c53b1; /* Random number */
- u32 has_nopl = nopl_signature;
-
- clear_cpu_cap(c, X86_FEATURE_NOPL);
- if (c->x86 >= 6) {
- asm volatile("\n"
- "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
- "2:\n"
- " .section .fixup,\"ax\"\n"
- "3: xor %0,%0\n"
- " jmp 2b\n"
- " .previous\n"
- _ASM_EXTABLE(1b,3b)
- : "+a" (has_nopl));
-
- if (has_nopl == nopl_signature)
- set_cpu_cap(c, X86_FEATURE_NOPL);
- }
-}
-
-static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
-{
- if (!have_cpuid_p())
- return;
-
- c->extended_cpuid_level = 0;
-
- cpu_detect(c);
-
- get_cpu_vendor(c);
-
- get_cpu_cap(c);
-
- if (c->cpuid_level >= 0x00000001) {
- c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF;
-#ifdef CONFIG_X86_32
-# ifdef CONFIG_X86_HT
- c->apicid = phys_pkg_id(c->initial_apicid, 0);
-# else
- c->apicid = c->initial_apicid;
-# endif
-#endif
-
-#ifdef CONFIG_X86_HT
- c->phys_proc_id = c->initial_apicid;
-#endif
- }
-
- if (c->extended_cpuid_level >= 0x80000004)
- get_model_name(c); /* Default name */
-
- init_scattered_cpuid_features(c);
- detect_nopl(c);
-}
-
-/*
- * This does the hard work of actually picking apart the CPU stuff...
- */
-static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
-{
- int i;
-
- c->loops_per_jiffy = loops_per_jiffy;
- c->x86_cache_size = -1;
- c->x86_vendor = X86_VENDOR_UNKNOWN;
- c->x86_model = c->x86_mask = 0; /* So far unknown... */
- c->x86_vendor_id[0] = '\0'; /* Unset */
- c->x86_model_id[0] = '\0'; /* Unset */
- c->x86_max_cores = 1;
-#ifdef CONFIG_X86_64
- c->x86_coreid_bits = 0;
- c->x86_clflush_size = 64;
-#else
- c->cpuid_level = -1; /* CPUID not detected */
- c->x86_clflush_size = 32;
-#endif
- c->x86_cache_alignment = c->x86_clflush_size;
- memset(&c->x86_capability, 0, sizeof c->x86_capability);
-
- if (!have_cpuid_p()) {
- /*
- * First of all, decide if this is a 486 or higher
- * It's a 486 if we can modify the AC flag
- */
- if (flag_is_changeable_p(X86_EFLAGS_AC))
- c->x86 = 4;
- else
- c->x86 = 3;
- }
-
- generic_identify(c);
-
- if (this_cpu->c_identify)
- this_cpu->c_identify(c);
-
-#ifdef CONFIG_X86_64
- c->apicid = phys_pkg_id(0);
-#endif
-
- /*
- * Vendor-specific initialization. In this section we
- * canonicalize the feature flags, meaning if there are
- * features a certain CPU supports which CPUID doesn't
- * tell us, CPUID claiming incorrect flags, or other bugs,
- * we handle them here.
- *
- * At the end of this section, c->x86_capability better
- * indicate the features this CPU genuinely supports!
- */
- if (this_cpu->c_init)
- this_cpu->c_init(c);
-
- /* Disable the PN if appropriate */
- squash_the_stupid_serial_number(c);
-
- /*
- * The vendor-specific functions might have changed features. Now
- * we do "generic changes."
- */
-
- /* If the model name is still unset, do table lookup. */
- if (!c->x86_model_id[0]) {
- char *p;
- p = table_lookup_model(c);
- if (p)
- strcpy(c->x86_model_id, p);
- else
- /* Last resort... */
- sprintf(c->x86_model_id, "%02x/%02x",
- c->x86, c->x86_model);
- }
-
-#ifdef CONFIG_X86_64
- detect_ht(c);
-#endif
-
- /*
- * On SMP, boot_cpu_data holds the common feature set between
- * all CPUs; so make sure that we indicate which features are
- * common between the CPUs. The first time this routine gets
- * executed, c == &boot_cpu_data.
- */
- if (c != &boot_cpu_data) {
- /* AND the already accumulated flags with these */
- for (i = 0; i < NCAPINTS; i++)
- boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
- }
-
- /* Clear all flags overriden by options */
- for (i = 0; i < NCAPINTS; i++)
- c->x86_capability[i] &= ~cleared_cpu_caps[i];
-
-#ifdef CONFIG_X86_MCE
- /* Init Machine Check Exception if available. */
- mcheck_init(c);
-#endif
-
- select_idle_routine(c);
-
-#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
- numa_add_cpu(smp_processor_id());
-#endif
-}
-
-void __init identify_boot_cpu(void)
-{
- identify_cpu(&boot_cpu_data);
-#ifdef CONFIG_X86_32
- sysenter_setup();
- enable_sep_cpu();
-#endif
-}
-
-void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
-{
- BUG_ON(c == &boot_cpu_data);
- identify_cpu(c);
-#ifdef CONFIG_X86_32
- enable_sep_cpu();
-#endif
- mtrr_ap_init();
-}
-
-struct msr_range {
- unsigned min;
- unsigned max;
-};
-
-static struct msr_range msr_range_array[] __cpuinitdata = {
- { 0x00000000, 0x00000418},
- { 0xc0000000, 0xc000040b},
- { 0xc0010000, 0xc0010142},
- { 0xc0011000, 0xc001103b},
-};
-
-static void __cpuinit print_cpu_msr(void)
-{
- unsigned index;
- u64 val;
- int i;
- unsigned index_min, index_max;
-
- for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) {
- index_min = msr_range_array[i].min;
- index_max = msr_range_array[i].max;
- for (index = index_min; index < index_max; index++) {
- if (rdmsrl_amd_safe(index, &val))
- continue;
- printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
- }
- }
-}
-
-static int show_msr __cpuinitdata;
-static __init int setup_show_msr(char *arg)
-{
- int num;
-
- get_option(&arg, &num);
-
- if (num > 0)
- show_msr = num;
- return 1;
-}
-__setup("show_msr=", setup_show_msr);
-
-static __init int setup_noclflush(char *arg)
-{
- setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
- return 1;
-}
-__setup("noclflush", setup_noclflush);
-
-void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
-{
- char *vendor = NULL;
-
- if (c->x86_vendor < X86_VENDOR_NUM)
- vendor = this_cpu->c_vendor;
- else if (c->cpuid_level >= 0)
- vendor = c->x86_vendor_id;
-
- if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor)))
- printk(KERN_CONT "%s ", vendor);
-
- if (c->x86_model_id[0])
- printk(KERN_CONT "%s", c->x86_model_id);
- else
- printk(KERN_CONT "%d86", c->x86);
-
- if (c->x86_mask || c->cpuid_level >= 0)
- printk(KERN_CONT " stepping %02x\n", c->x86_mask);
- else
- printk(KERN_CONT "\n");
-
-#ifdef CONFIG_SMP
- if (c->cpu_index < show_msr)
- print_cpu_msr();
-#else
- if (show_msr)
- print_cpu_msr();
-#endif
-}
-
-static __init int setup_disablecpuid(char *arg)
-{
- int bit;
- if (get_option(&arg, &bit) && bit < NCAPINTS*32)
- setup_clear_cpu_cap(bit);
- else
- return 0;
- return 1;
-}
-__setup("clearcpuid=", setup_disablecpuid);
-
-cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
-
-#ifdef CONFIG_X86_64
-struct x8664_pda **_cpu_pda __read_mostly;
-EXPORT_SYMBOL(_cpu_pda);
-
-struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
-
-char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
-
-unsigned long __supported_pte_mask __read_mostly = ~0UL;
-EXPORT_SYMBOL_GPL(__supported_pte_mask);
-
-static int do_not_nx __cpuinitdata;
-
-/* noexec=on|off
-Control non executable mappings for 64bit processes.
-
-on Enable(default)
-off Disable
-*/
-static int __init nonx_setup(char *str)
-{
- if (!str)
- return -EINVAL;
- if (!strncmp(str, "on", 2)) {
- __supported_pte_mask |= _PAGE_NX;
- do_not_nx = 0;
- } else if (!strncmp(str, "off", 3)) {
- do_not_nx = 1;
- __supported_pte_mask &= ~_PAGE_NX;
- }
- return 0;
-}
-early_param("noexec", nonx_setup);
-
-int force_personality32;
-
-/* noexec32=on|off
-Control non executable heap for 32bit processes.
-To control the stack too use noexec=off
-
-on PROT_READ does not imply PROT_EXEC for 32bit processes (default)
-off PROT_READ implies PROT_EXEC
-*/
-static int __init nonx32_setup(char *str)
-{
- if (!strcmp(str, "on"))
- force_personality32 &= ~READ_IMPLIES_EXEC;
- else if (!strcmp(str, "off"))
- force_personality32 |= READ_IMPLIES_EXEC;
- return 1;
-}
-__setup("noexec32=", nonx32_setup);
-
-void pda_init(int cpu)
-{
- struct x8664_pda *pda = cpu_pda(cpu);
-
- /* Setup up data that may be needed in __get_free_pages early */
- loadsegment(fs, 0);
- loadsegment(gs, 0);
- /* Memory clobbers used to order PDA accessed */
- mb();
- wrmsrl(MSR_GS_BASE, pda);
- mb();
-
- pda->cpunumber = cpu;
- pda->irqcount = -1;
- pda->kernelstack = (unsigned long)stack_thread_info() -
- PDA_STACKOFFSET + THREAD_SIZE;
- pda->active_mm = &init_mm;
- pda->mmu_state = 0;
-
- if (cpu == 0) {
- /* others are initialized in smpboot.c */
- pda->pcurrent = &init_task;
- pda->irqstackptr = boot_cpu_stack;
- pda->irqstackptr += IRQSTACKSIZE - 64;
- } else {
- if (!pda->irqstackptr) {
- pda->irqstackptr = (char *)
- __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
- if (!pda->irqstackptr)
- panic("cannot allocate irqstack for cpu %d",
- cpu);
- pda->irqstackptr += IRQSTACKSIZE - 64;
- }
-
- if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
- pda->nodenumber = cpu_to_node(cpu);
- }
-}
-
-char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
- DEBUG_STKSZ] __page_aligned_bss;
-
-extern asmlinkage void ignore_sysret(void);
-
-/* May not be marked __init: used by software suspend */
-void syscall_init(void)
-{
- /*
- * LSTAR and STAR live in a bit strange symbiosis.
- * They both write to the same internal register. STAR allows to
- * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
- */
- wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32);
- wrmsrl(MSR_LSTAR, system_call);
- wrmsrl(MSR_CSTAR, ignore_sysret);
-
-#ifdef CONFIG_IA32_EMULATION
- syscall32_cpu_init();
-#endif
-
- /* Flags to clear on syscall */
- wrmsrl(MSR_SYSCALL_MASK,
- X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
-}
-
-void __cpuinit check_efer(void)
-{
- unsigned long efer;
-
- rdmsrl(MSR_EFER, efer);
- if (!(efer & EFER_NX) || do_not_nx)
- __supported_pte_mask &= ~_PAGE_NX;
-}
-
-unsigned long kernel_eflags;
-
-/*
- * Copies of the original ist values from the tss are only accessed during
- * debugging, no special alignment required.
- */
-DEFINE_PER_CPU(struct orig_ist, orig_ist);
-
-#else
-
-/* Make sure %fs is initialized properly in idle threads */
-struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
-{
- memset(regs, 0, sizeof(struct pt_regs));
- regs->fs = __KERNEL_PERCPU;
- return regs;
-}
-#endif
-
-/*
- * cpu_init() initializes state that is per-CPU. Some data is already
- * initialized (naturally) in the bootstrap process, such as the GDT
- * and IDT. We reload them nevertheless, this function acts as a
- * 'CPU state barrier', nothing should get across.
- * A lot of state is already set up in PDA init for 64 bit
- */
-#ifdef CONFIG_X86_64
-void __cpuinit cpu_init(void)
-{
- int cpu = stack_smp_processor_id();
- struct tss_struct *t = &per_cpu(init_tss, cpu);
- struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
- unsigned long v;
- char *estacks = NULL;
- struct task_struct *me;
- int i;
-
- /* CPU 0 is initialised in head64.c */
- if (cpu != 0)
- pda_init(cpu);
- else
- estacks = boot_exception_stacks;
-
- me = current;
-
- if (cpu_test_and_set(cpu, cpu_initialized))
- panic("CPU#%d already initialized!\n", cpu);
-
- printk(KERN_INFO "Initializing CPU#%d\n", cpu);
-
- clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
-
- /*
- * Initialize the per-CPU GDT with the boot GDT,
- * and set up the GDT descriptor:
- */
-
- switch_to_new_gdt();
- load_idt((const struct desc_ptr *)&idt_descr);
-
- memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
- syscall_init();
-
- wrmsrl(MSR_FS_BASE, 0);
- wrmsrl(MSR_KERNEL_GS_BASE, 0);
- barrier();
-
- check_efer();
- if (cpu != 0 && x2apic)
- enable_x2apic();
-
- /*
- * set up and load the per-CPU TSS
- */
- if (!orig_ist->ist[0]) {
- static const unsigned int order[N_EXCEPTION_STACKS] = {
- [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
- [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
- };
- for (v = 0; v < N_EXCEPTION_STACKS; v++) {
- if (cpu) {
- estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
- if (!estacks)
- panic("Cannot allocate exception "
- "stack %ld %d\n", v, cpu);
- }
- estacks += PAGE_SIZE << order[v];
- orig_ist->ist[v] = t->x86_tss.ist[v] =
- (unsigned long)estacks;
- }
- }
-
- t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
- /*
- * <= is required because the CPU will access up to
- * 8 bits beyond the end of the IO permission bitmap.
- */
- for (i = 0; i <= IO_BITMAP_LONGS; i++)
- t->io_bitmap[i] = ~0UL;
-
- atomic_inc(&init_mm.mm_count);
- me->active_mm = &init_mm;
- if (me->mm)
- BUG();
- enter_lazy_tlb(&init_mm, me);
-
- load_sp0(t, ¤t->thread);
- set_tss_desc(cpu, t);
- load_TR_desc();
- load_LDT(&init_mm.context);
-
-#ifdef CONFIG_KGDB
- /*
- * If the kgdb is connected no debug regs should be altered. This
- * is only applicable when KGDB and a KGDB I/O module are built
- * into the kernel and you are using early debugging with
- * kgdbwait. KGDB will control the kernel HW breakpoint registers.
- */
- if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
- arch_kgdb_ops.correct_hw_break();
- else {
-#endif
- /*
- * Clear all 6 debug registers:
- */
-
- set_debugreg(0UL, 0);
- set_debugreg(0UL, 1);
- set_debugreg(0UL, 2);
- set_debugreg(0UL, 3);
- set_debugreg(0UL, 6);
- set_debugreg(0UL, 7);
-#ifdef CONFIG_KGDB
- /* If the kgdb is connected no debug regs should be altered. */
- }
-#endif
-
- fpu_init();
-
- raw_local_save_flags(kernel_eflags);
-
- if (is_uv_system())
- uv_cpu_init();
-}
-
-#else
-
-void __cpuinit cpu_init(void)
-{
- int cpu = smp_processor_id();
- struct task_struct *curr = current;
- struct tss_struct *t = &per_cpu(init_tss, cpu);
- struct thread_struct *thread = &curr->thread;
-
- if (cpu_test_and_set(cpu, cpu_initialized)) {
- printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
- for (;;) local_irq_enable();
- }
-
- printk(KERN_INFO "Initializing CPU#%d\n", cpu);
-
- if (cpu_has_vme || cpu_has_tsc || cpu_has_de)
- clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
-
- load_idt(&idt_descr);
- switch_to_new_gdt();
-
- /*
- * Set up and load the per-CPU TSS and LDT
- */
- atomic_inc(&init_mm.mm_count);
- curr->active_mm = &init_mm;
- if (curr->mm)
- BUG();
- enter_lazy_tlb(&init_mm, curr);
-
- load_sp0(t, thread);
- set_tss_desc(cpu, t);
- load_TR_desc();
- load_LDT(&init_mm.context);
-
-#ifdef CONFIG_DOUBLEFAULT
- /* Set up doublefault TSS pointer in the GDT */
- __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
-#endif
-
- /* Clear %gs. */
- asm volatile ("mov %0, %%gs" : : "r" (0));
-
- /* Clear all 6 debug registers: */
- set_debugreg(0, 0);
- set_debugreg(0, 1);
- set_debugreg(0, 2);
- set_debugreg(0, 3);
- set_debugreg(0, 6);
- set_debugreg(0, 7);
-
- /*
- * Force FPU initialization:
- */
- if (cpu_has_xsave)
- current_thread_info()->status = TS_XSAVE;
- else
- current_thread_info()->status = 0;
- clear_used_math();
- mxcsr_feature_mask_init();
-
- /*
- * Boot processor to setup the FP and extended state context info.
- */
- if (!smp_processor_id())
- init_thread_xstate();
-
- xsave_init();
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-void __cpuinit cpu_uninit(void)
-{
- int cpu = raw_smp_processor_id();
- cpu_clear(cpu, cpu_initialized);
-
- /* lazy TLB state */
- per_cpu(cpu_tlbstate, cpu).state = 0;
- per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm;
-}
-#endif
-
-#endif
projects / deliverable / linux.git / commitdiff
