ARM: dts: add pin state information in client nodes for Exynos5 platforms
authorThomas Abraham <thomas.abraham@linaro.org>
Thu, 4 Apr 2013 05:16:11 +0000 (14:16 +0900)
committerKukjin Kim <kgene.kim@samsung.com>
Mon, 8 Apr 2013 16:15:26 +0000 (01:15 +0900)
Add default pin state information for all client nodes that require
pin configuration support using pinctrl interface.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
arch/arm/boot/dts/cros5250-common.dtsi
arch/arm/boot/dts/exynos5250-pinctrl.dtsi [new file with mode: 0644]
arch/arm/boot/dts/exynos5250-smdk5250.dts
arch/arm/boot/dts/exynos5250-snow.dts
arch/arm/boot/dts/exynos5250.dtsi

index 62eceb4f0d3fa74fc0fe010e3f4ce5b494dc1738..8a5b3a6cdc58fc4e6f36f7a89c43360fdb5d80c4 100644 (file)
        chosen {
        };
 
+       pinctrl@11400000 {
+               /*
+                * Disabled pullups since external part has its own pullups and
+                * double-pulling gets us out of spec in some cases.
+                */
+               i2c2_bus: i2c2-bus {
+                       samsung,pin-pud = <0>;
+               };
+       };
+
        i2c@12C60000 {
                samsung,i2c-sda-delay = <100>;
                samsung,i2c-max-bus-freq = <378000>;
-               gpios = <&gpb3 0 2 3 0>,
-                       <&gpb3 1 2 3 0>;
 
                max77686@09 {
                        compatible = "maxim,max77686";
        i2c@12C70000 {
                samsung,i2c-sda-delay = <100>;
                samsung,i2c-max-bus-freq = <378000>;
-               gpios = <&gpb3 2 2 3 0>,
-                       <&gpb3 3 2 3 0>;
        };
 
        i2c@12C80000 {
                samsung,i2c-sda-delay = <100>;
                samsung,i2c-max-bus-freq = <66000>;
 
-               /*
-                * Disabled pullups since external part has its own pullups and
-                * double-pulling gets us out of spec in some cases.
-                */
-               gpios = <&gpa0 6 3 0 0>,
-                       <&gpa0 7 3 0 0>;
-
                hdmiddc@50 {
                        compatible = "samsung,exynos5-hdmiddc";
                        reg = <0x50>;
        i2c@12C90000 {
                samsung,i2c-sda-delay = <100>;
                samsung,i2c-max-bus-freq = <66000>;
-               gpios = <&gpa1 2 3 3 0>,
-                       <&gpa1 3 3 3 0>;
        };
 
        i2c@12CA0000 {
        i2c@12CB0000 {
                samsung,i2c-sda-delay = <100>;
                samsung,i2c-max-bus-freq = <66000>;
-               gpios = <&gpa2 2 3 3 0>,
-                       <&gpa2 3 3 3 0>;
        };
 
        i2c@12CC0000 {
        i2c@12CD0000 {
                samsung,i2c-sda-delay = <100>;
                samsung,i2c-max-bus-freq = <66000>;
-               gpios = <&gpb2 2 3 3 0>,
-                       <&gpb2 3 3 3 0>;
        };
 
        i2c@12CE0000 {
                samsung,dw-mshc-ciu-div = <3>;
                samsung,dw-mshc-sdr-timing = <2 3>;
                samsung,dw-mshc-ddr-timing = <1 2>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
 
                slot@0 {
                        reg = <0>;
                        bus-width = <8>;
-                       gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
-                               <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
-                               <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
-                               <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
-                               <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
                };
        };
 
                samsung,dw-mshc-ciu-div = <3>;
                samsung,dw-mshc-sdr-timing = <2 3>;
                samsung,dw-mshc-ddr-timing = <1 2>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 
                slot@0 {
                        reg = <0>;
                        bus-width = <4>;
-                       samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
-                       wp-gpios = <&gpc2 1 0 0 3>;
-                       gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
-                               <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
-                               <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+                       wp-gpios = <&gpc2 1 0>;
                };
        };
 
                samsung,dw-mshc-ciu-div = <3>;
                samsung,dw-mshc-sdr-timing = <2 3>;
                samsung,dw-mshc-ddr-timing = <1 2>;
+               /* See board-specific dts files for pin setup */
 
                slot@0 {
                        reg = <0>;
                        bus-width = <4>;
-                       /* See board-specific dts files for GPIOs */
                };
        };
 
        };
 
        spi_1: spi@12d30000 {
-               gpios = <&gpa2 4 2 3 0>,
-                       <&gpa2 6 2 3 0>,
-                       <&gpa2 7 2 3 0>;
                samsung,spi-src-clk = <0>;
                num-cs = <1>;
        };
        };
 
        hdmi {
-               hpd-gpio = <&gpx3 7 0xf 1 3>;
+               hpd-gpio = <&gpx3 7 0>;
        };
 
        gpio-keys {
 
                power {
                        label = "Power";
-                       gpios = <&gpx1 3 0 0x10000 0>;
+                       gpios = <&gpx1 3 1>;
                        linux,code = <116>; /* KEY_POWER */
                        gpio-key,wakeup;
                };
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
new file mode 100644 (file)
index 0000000..d1650fb
--- /dev/null
@@ -0,0 +1,783 @@
+/*
+ * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ *
+ * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+       pinctrl@11400000 {
+               gpa0: gpa0 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpa1: gpa1 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpa2: gpa2 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpb0: gpb0 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpb1: gpb1 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpb2: gpb2 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpb3: gpb3 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpc0: gpc0 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpc1: gpc1 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpc2: gpc2 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpc3: gpc3 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpd0: gpd0 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpd1: gpd1 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpy0: gpy0 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
+
+               gpy1: gpy1 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
+
+               gpy2: gpy2 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
+
+               gpy3: gpy3 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
+
+               gpy4: gpy4 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
+
+               gpy5: gpy5 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
+
+               gpy6: gpy6 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
+
+               gpc4: gpc4 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpx0: gpx0 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       interrupt-parent = <&combiner>;
+                       #interrupt-cells = <2>;
+                       interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+                                    <26 0>, <26 1>, <27 0>, <27 1>;
+               };
+
+               gpx1: gpx1 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       interrupt-parent = <&combiner>;
+                       #interrupt-cells = <2>;
+                       interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+                                    <30 0>, <30 1>, <31 0>, <31 1>;
+               };
+
+               gpx2: gpx2 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpx3: gpx3 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               uart0_data: uart0-data {
+                       samsung,pins = "gpa0-0", "gpa0-1";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <0>;
+               };
+
+               uart0_fctl: uart0-fctl {
+                       samsung,pins = "gpa0-2", "gpa0-3";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samaung,pin-drv = <0>;
+               };
+
+               i2c2_bus: i2c2-bus {
+                       samsung,pins = "gpa0-6", "gpa0-7";
+                       samsung,pin-function = <3>;
+                       samsung,pin-pud = <3>;
+                       samaung,pin-drv = <0>;
+               };
+
+               i2c2_hs_bus: i2c2-hs-bus {
+                       samsung,pins = "gpa0-6", "gpa0-7";
+                       samsung,pin-function = <4>;
+                       samsung,pin-pud = <3>;
+                       samaung,pin-drv = <0>;
+               };
+
+               uart2_data: uart2-data {
+                       samsung,pins = "gpa1-0", "gpa1-1";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <0>;
+               };
+
+               uart2_fctl: uart2-fctl {
+                       samsung,pins = "gpa1-2", "gpa1-3";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samaung,pin-drv = <0>;
+               };
+
+               i2c3_bus: i2c3-bus {
+                       samsung,pins = "gpa1-2", "gpa1-3";
+                       samsung,pin-function = <3>;
+                       samsung,pin-pud = <3>;
+                       samaung,pin-drv = <0>;
+               };
+
+               i2c3_hs_bus: i2c3-hs-bus {
+                       samsung,pins = "gpa1-2", "gpa1-3";
+                       samsung,pin-function = <4>;
+                       samsung,pin-pud = <3>;
+                       samaung,pin-drv = <0>;
+               };
+
+               uart3_data: uart3-data {
+                       samsung,pins = "gpa1-4", "gpa1-4";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <0>;
+               };
+
+               spi0_bus: spi0-bus {
+                       samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <0>;
+               };
+
+               i2c4_bus: i2c4-bus {
+                       samsung,pins = "gpa2-0", "gpa2-1";
+                       samsung,pin-function = <3>;
+                       samsung,pin-pud = <3>;
+                       samaung,pin-drv = <0>;
+               };
+
+               i2c5_bus: i2c5-bus {
+                       samsung,pins = "gpa2-2", "gpa2-3";
+                       samsung,pin-function = <3>;
+                       samsung,pin-pud = <3>;
+                       samaung,pin-drv = <0>;
+               };
+
+               spi1_bus: spi1-bus {
+                       samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <0>;
+               };
+
+               i2s1_bus: i2s1-bus {
+                       samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+                                       "gpb0-4";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <0>;
+               };
+
+               pcm1_bus: pcm1-bus {
+                       samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+                                       "gpb0-4";
+                       samsung,pin-function = <3>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <0>;
+               };
+
+               ac97_bus: ac97-bus {
+                       samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+                                       "gpb0-4";
+                       samsung,pin-function = <4>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <0>;
+               };
+
+               i2s2_bus: i2s2-bus {
+                       samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+                                       "gpb1-4";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <0>;
+               };
+
+               pcm2_bus: pcm2-bus {
+                       samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+                                       "gpb1-4";
+                       samsung,pin-function = <3>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <0>;
+               };
+
+               spdif_bus: spdif-bus {
+                       samsung,pins = "gpb1-0", "gpb1-1";
+                       samsung,pin-function = <4>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <0>;
+               };
+
+               spi2_bus: spi2-bus {
+                       samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+                       samsung,pin-function = <5>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <0>;
+               };
+
+               i2c6_bus: i2c6-bus {
+                       samsung,pins = "gpb1-3", "gpb1-4";
+                       samsung,pin-function = <4>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <0>;
+               };
+
+               i2c7_bus: i2c7-bus {
+                       samsung,pins = "gpb2-2", "gpb2-3";
+                       samsung,pin-function = <3>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <0>;
+               };
+
+               i2c0_bus: i2c0-bus {
+                       samsung,pins = "gpb3-0", "gpb3-1";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <0>;
+               };
+
+               i2c1_bus: i2c1-bus {
+                       samsung,pins = "gpb3-2", "gpb3-3";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <0>;
+               };
+
+               i2c0_hs_bus: i2c0-hs-bus {
+                       samsung,pins = "gpb3-0", "gpb3-1";
+                       samsung,pin-function = <4>;
+                       samsung,pin-pud = <3>;
+                       samaung,pin-drv = <0>;
+               };
+
+               i2c1_hs_bus: i2c1-hs-bus {
+                       samsung,pins = "gpb3-2", "gpb3-3";
+                       samsung,pin-function = <4>;
+                       samsung,pin-pud = <3>;
+                       samaung,pin-drv = <0>;
+               };
+
+               sd0_clk: sd0-clk {
+                       samsung,pins = "gpc0-0";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd0_cmd: sd0-cmd {
+                       samsung,pins = "gpc0-1";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd0_cd: sd0-cd {
+                       samsung,pins = "gpc0-2";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd0_bus1: sd0-bus-width1 {
+                       samsung,pins = "gpc0-3";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd0_bus4: sd0-bus-width4 {
+                       samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd0_bus8: sd0-bus-width8 {
+                       samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd1_clk: sd1-clk {
+                       samsung,pins = "gpc2-0";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd1_cmd: sd1-cmd {
+                       samsung,pins = "gpc2-1";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd1_cd: sd1-cd {
+                       samsung,pins = "gpc2-2";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd1_bus1: sd1-bus-width1 {
+                       samsung,pins = "gpc2-3";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd1_bus4: sd1-bus-width4 {
+                       samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd2_clk: sd2-clk {
+                       samsung,pins = "gpc3-0";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd2_cmd: sd2-cmd {
+                       samsung,pins = "gpc3-1";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd2_cd: sd2-cd {
+                       samsung,pins = "gpc3-2";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd2_bus1: sd2-bus-width1 {
+                       samsung,pins = "gpc3-3";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd2_bus4: sd2-bus-width4 {
+                       samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd2_bus8: sd2-bus-width8 {
+                       samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+                       samsung,pin-function = <3>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd3_clk: sd3-clk {
+                       samsung,pins = "gpc4-0";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd3_cmd: sd3-cmd {
+                       samsung,pins = "gpc4-1";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd3_cd: sd3-cd {
+                       samsung,pins = "gpc4-2";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd3_bus1: sd3-bus-width1 {
+                       samsung,pins = "gpc4-3";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               sd3_bus4: sd3-bus-width4 {
+                       samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <3>;
+               };
+
+               uart1_data: uart1-data {
+                       samsung,pins = "gpd0-0", "gpd0-1";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <0>;
+               };
+
+               uart1_fctl: uart1-fctl {
+                       samsung,pins = "gpd0-2", "gpd0-3";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samaung,pin-drv = <0>;
+               };
+       };
+
+       pinctrl@13400000 {
+               gpe0: gpe0 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpe1: gpe1 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpf0: gpf0 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpf1: gpf1 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpg0: gpg0 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpg1: gpg1 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpg2: gpg2 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gph0: gph0 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gph1: gph1 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               cam_gpio_a: cam-gpio-a {
+                       samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+                                      "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+                                      "gpe1-0", "gpe1-1";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <0>;
+               };
+
+               cam_gpio_b: cam-gpio-b {
+                       samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+                                      "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+                       samsung,pin-function = <3>;
+                       samsung,pin-pud = <0>;
+                       samaung,pin-drv = <0>;
+               };
+
+               cam_i2c2_bus: cam-i2c2-bus {
+                       samsung,pins = "gpe0-6", "gpe1-0";
+                       samsung,pin-function = <4>;
+                       samsung,pin-pud = <3>;
+                       samaung,pin-drv = <0>;
+               };
+
+               cam_spi1_bus: cam-spi1-bus {
+                       samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+                       samsung,pin-function = <4>;
+                       samsung,pin-pud = <0>;
+                       samaung,pin-drv = <0>;
+               };
+
+               cam_i2c1_bus: cam-i2c1-bus {
+                       samsung,pins = "gpf0-2", "gpf0-3";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samaung,pin-drv = <0>;
+               };
+
+               cam_i2c0_bus: cam-i2c0-bus {
+                       samsung,pins = "gpf0-0", "gpf0-1";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <3>;
+                       samaung,pin-drv = <0>;
+               };
+
+               cam_spi0_bus: cam-spi0-bus {
+                       samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samaung,pin-drv = <0>;
+               };
+
+               cam_bayrgb_bus: cam-bayrgb-bus {
+                       samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+                                      "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+                                      "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+                                      "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+                                      "gpg2-0", "gpg2-1";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samaung,pin-drv = <0>;
+               };
+
+               cam_port_a: cam-port-a {
+                       samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
+                                      "gph1-0", "gph1-1", "gph1-2", "gph1-3",
+                                      "gph1-4", "gph1-5", "gph1-6", "gph1-7";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samaung,pin-drv = <0>;
+               };
+       };
+
+       pinctrl@10d10000 {
+               gpv0: gpv0 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpv1: gpv1 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpv2: gpv2 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpv3: gpv3 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpv4: gpv4 {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               c2c_rxd: c2c-rxd {
+                       samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+                                      "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+                                      "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+                                      "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samaung,pin-drv = <0>;
+               };
+
+               c2c_txd: c2c-txd {
+                       samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+                                      "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+                                      "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+                                      "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samaung,pin-drv = <0>;
+               };
+       };
+
+       pinctrl@03680000 {
+               gpz: gpz {
+                       gpio-controller;
+                       #gpio-cells = <2>;
+
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               i2s0_bus: i2s0-bus {
+                       samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+                                       "gpz-4", "gpz-5", "gpz-6";
+                       samsung,pin-function = <2>;
+                       samsung,pin-pud = <0>;
+                       samsung,pin-drv = <0>;
+               };
+       };
+};
index 872ae1f93c75288823d52118bce7e716967c859f..74da9de723c958c4c18d48bace8b1e324d287f8c 100644 (file)
@@ -30,8 +30,6 @@
        i2c@12C60000 {
                samsung,i2c-sda-delay = <100>;
                samsung,i2c-max-bus-freq = <20000>;
-               gpios = <&gpb3 0 2 3 0>,
-                       <&gpb3 1 2 3 0>;
 
                eeprom@50 {
                        compatible = "samsung,s524ad0xd1";
@@ -42,8 +40,6 @@
        i2c@12C70000 {
                samsung,i2c-sda-delay = <100>;
                samsung,i2c-max-bus-freq = <20000>;
-               gpios = <&gpb3 2 2 3 0>,
-                       <&gpb3 3 2 3 0>;
 
                eeprom@51 {
                        compatible = "samsung,s524ad0xd1";
@@ -74,8 +70,6 @@
        i2c@12C80000 {
                samsung,i2c-sda-delay = <100>;
                samsung,i2c-max-bus-freq = <66000>;
-               gpios = <&gpa0 6 3 3 0>,
-                       <&gpa0 7 3 3 0>;
 
                hdmiddc@50 {
                        compatible = "samsung,exynos5-hdmiddc";
                samsung,dw-mshc-ciu-div = <3>;
                samsung,dw-mshc-sdr-timing = <2 3>;
                samsung,dw-mshc-ddr-timing = <1 2>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 
                slot@0 {
                        reg = <0>;
                        bus-width = <8>;
-                       gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
-                               <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
-                               <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
-                               <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
-                               <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
                };
        };
 
                samsung,dw-mshc-ciu-div = <3>;
                samsung,dw-mshc-sdr-timing = <2 3>;
                samsung,dw-mshc-ddr-timing = <1 2>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 
                slot@0 {
                        reg = <0>;
                        bus-width = <4>;
-                       samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
                        disable-wp;
-                       gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
-                               <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
-                               <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
-                               <&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
-                               <&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
                };
        };
 
        };
 
        spi_1: spi@12d30000 {
-               gpios = <&gpa2 4 2 3 0>,
-                       <&gpa2 6 2 3 0>,
-                       <&gpa2 7 2 3 0>;
-
                w25q80bw@0 {
                        #address-cells = <1>;
                        #size-cells = <1>;
                        spi-max-frequency = <1000000>;
 
                        controller-data {
-                               cs-gpio = <&gpa2 5 1 0 3>;
+                               cs-gpio = <&gpa2 5 0>;
                                samsung,spi-feedback-delay = <0>;
                        };
 
        };
 
        hdmi {
-               hpd-gpio = <&gpx3 7 0xf 1 3>;
+               hpd-gpio = <&gpx3 7 0>;
        };
 
        codec@11000000 {
        };
 
        i2s0: i2s@03830000 {
-               gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>,
-                       <&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>,
-                       <&gpz 6 2 0 0>;
+               status = "okay";
        };
 
        i2s1: i2s@12D60000 {
index babd9f9b1bf9fdc955303b6c0f758ba0a35337d8..581ffae27e13826af6ba7d81346ea24c59f7e0df 100644 (file)
        model = "Google Snow";
        compatible = "google,snow", "samsung,exynos5250";
 
+       pinctrl@11400000 {
+               sd3_clk: sd3-clk {
+                       samsung,pin-drv = <0>;
+               };
+
+               sd3_cmd: sd3-cmd {
+                       samsung,pin-pud = <3>;
+                       samsung,pin-drv = <0>;
+               };
+
+               sd3_bus4: sd3-bus-width4 {
+                       samsung,pin-drv = <0>;
+               };
+       };
+
        gpio-keys {
                compatible = "gpio-keys";
 
                lid-switch {
                        label = "Lid";
-                       gpios = <&gpx3 5 0 0x10000 0>;
+                       gpios = <&gpx3 5 1>;
                        linux,input-type = <5>; /* EV_SW */
                        linux,code = <0>; /* SW_LID */
                        debounce-interval = <1>;
@@ -35,9 +50,8 @@
         */
        dwmmc3@12230000 {
                slot@0 {
-                       gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>,
-                               <&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>,
-                               <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
                };
        };
 
index f8c9964f367c95fffecea0160068d36fe0387144..1dc26009e3ae48648772887beec38f26dfa845c9 100644 (file)
@@ -18,6 +18,7 @@
 */
 
 /include/ "skeleton.dtsi"
+/include/ "exynos5250-pinctrl.dtsi"
 
 / {
        compatible = "samsung,exynos5250";
                i2c6 = &i2c_6;
                i2c7 = &i2c_7;
                i2c8 = &i2c_8;
+               pinctrl0 = &pinctrl_0;
+               pinctrl1 = &pinctrl_1;
+               pinctrl2 = &pinctrl_2;
+               pinctrl3 = &pinctrl_3;
        };
 
        pd_gsc: gsc-power-domain@0x10044000 {
                };
        };
 
+       pinctrl_0: pinctrl@11400000 {
+               compatible = "samsung,exynos5250-pinctrl";
+               reg = <0x11400000 0x1000>;
+               interrupts = <0 46 0>;
+
+               wakup_eint: wakeup-interrupt-controller {
+                       compatible = "samsung,exynos4210-wakeup-eint";
+                       interrupt-parent = <&gic>;
+                       interrupts = <0 32 0>;
+               };
+       };
+
+       pinctrl_1: pinctrl@13400000 {
+               compatible = "samsung,exynos5250-pinctrl";
+               reg = <0x13400000 0x1000>;
+               interrupts = <0 45 0>;
+       };
+
+       pinctrl_2: pinctrl@10d10000 {
+               compatible = "samsung,exynos5250-pinctrl";
+               reg = <0x10d10000 0x1000>;
+               interrupts = <0 50 0>;
+       };
+
+       pinctrl_3: pinctrl@03680000 {
+               compatible = "samsung,exynos5250-pinctrl";
+               reg = <0x0368000 0x1000>;
+               interrupts = <0 47 0>;
+       };
+
        watchdog {
                compatible = "samsung,s3c2410-wdt";
                reg = <0x101D0000 0x100>;
                #size-cells = <0>;
                clocks = <&clock 294>;
                clock-names = "i2c";
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c0_bus>;
        };
 
        i2c_1: i2c@12C70000 {
                #size-cells = <0>;
                clocks = <&clock 295>;
                clock-names = "i2c";
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c1_bus>;
        };
 
        i2c_2: i2c@12C80000 {
                #size-cells = <0>;
                clocks = <&clock 296>;
                clock-names = "i2c";
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c2_bus>;
        };
 
        i2c_3: i2c@12C90000 {
                #size-cells = <0>;
                clocks = <&clock 297>;
                clock-names = "i2c";
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c3_bus>;
        };
 
        i2c_4: i2c@12CA0000 {
                #size-cells = <0>;
                clocks = <&clock 298>;
                clock-names = "i2c";
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c4_bus>;
        };
 
        i2c_5: i2c@12CB0000 {
                #size-cells = <0>;
                clocks = <&clock 299>;
                clock-names = "i2c";
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c5_bus>;
        };
 
        i2c_6: i2c@12CC0000 {
                #size-cells = <0>;
                clocks = <&clock 300>;
                clock-names = "i2c";
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c6_bus>;
        };
 
        i2c_7: i2c@12CD0000 {
                #size-cells = <0>;
                clocks = <&clock 301>;
                clock-names = "i2c";
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2c7_bus>;
        };
 
        i2c_8: i2c@12CE0000 {
                #size-cells = <0>;
                clocks = <&clock 304>, <&clock 154>;
                clock-names = "spi", "spi_busclk0";
+               pinctrl-names = "default";
+               pinctrl-0 = <&spi0_bus>;
        };
 
        spi_1: spi@12d30000 {
                #size-cells = <0>;
                clocks = <&clock 305>, <&clock 155>;
                clock-names = "spi", "spi_busclk0";
+               pinctrl-names = "default";
+               pinctrl-0 = <&spi1_bus>;
        };
 
        spi_2: spi@12d40000 {
                #size-cells = <0>;
                clocks = <&clock 306>, <&clock 156>;
                clock-names = "spi", "spi_busclk0";
+               pinctrl-names = "default";
+               pinctrl-0 = <&spi2_bus>;
        };
 
        dwmmc_0: dwmmc0@12200000 {
                samsung,supports-rstclr;
                samsung,supports-secdai;
                samsung,idma-addr = <0x03000000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2s0_bus>;
        };
 
        i2s1: i2s@12D60000 {
                dmas = <&pdma1 12
                        &pdma1 11>;
                dma-names = "tx", "rx";
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2s1_bus>;
        };
 
        i2s2: i2s@12D70000 {
                dmas = <&pdma0 12
                        &pdma0 11>;
                dma-names = "tx", "rx";
+               pinctrl-names = "default";
+               pinctrl-0 = <&i2s2_bus>;
        };
 
        usb@12110000 {
                };
        };
 
-       gpio-controllers {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               gpio-controller;
-               ranges;
-
-               gpa0: gpio-controller@11400000 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400000 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpa1: gpio-controller@11400020 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400020 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpa2: gpio-controller@11400040 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400040 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpb0: gpio-controller@11400060 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400060 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpb1: gpio-controller@11400080 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400080 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpb2: gpio-controller@114000A0 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x114000A0 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpb3: gpio-controller@114000C0 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x114000C0 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpc0: gpio-controller@114000E0 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x114000E0 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpc1: gpio-controller@11400100 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400100 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpc2: gpio-controller@11400120 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400120 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpc3: gpio-controller@11400140 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400140 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpc4: gpio-controller@114002E0 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x114002E0 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpd0: gpio-controller@11400160 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400160 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpd1: gpio-controller@11400180 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400180 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpy0: gpio-controller@114001A0 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x114001A0 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpy1: gpio-controller@114001C0 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x114001C0 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpy2: gpio-controller@114001E0 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x114001E0 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpy3: gpio-controller@11400200 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400200 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpy4: gpio-controller@11400220 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400220 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpy5: gpio-controller@11400240 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400240 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpy6: gpio-controller@11400260 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400260 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpx0: gpio-controller@11400C00 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400C00 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpx1: gpio-controller@11400C20 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400C20 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpx2: gpio-controller@11400C40 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400C40 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpx3: gpio-controller@11400C60 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x11400C60 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpe0: gpio-controller@13400000 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x13400000 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpe1: gpio-controller@13400020 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x13400020 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpf0: gpio-controller@13400040 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x13400040 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpf1: gpio-controller@13400060 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x13400060 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpg0: gpio-controller@13400080 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x13400080 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpg1: gpio-controller@134000A0 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x134000A0 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpg2: gpio-controller@134000C0 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x134000C0 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gph0: gpio-controller@134000E0 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x134000E0 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gph1: gpio-controller@13400100 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x13400100 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpv0: gpio-controller@10D10000 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x10D10000 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpv1: gpio-controller@10D10020 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x10D10020 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpv2: gpio-controller@10D10040 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x10D10060 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpv3: gpio-controller@10D10060 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x10D10080 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpv4: gpio-controller@10D10080 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x10D100C0 0x20>;
-                       #gpio-cells = <4>;
-               };
-
-               gpz: gpio-controller@03860000 {
-                       compatible = "samsung,exynos4-gpio";
-                       reg = <0x03860000 0x20>;
-                       #gpio-cells = <4>;
-               };
-       };
-
-
        gsc_0:  gsc@0x13e00000 {
                compatible = "samsung,exynos5-gsc";
                reg = <0x13e00000 0x1000>;
This page took 0.044061 seconds and 5 git commands to generate.