arm64: dts: rockchip: Add main thermal info to rk3368.dtsi
authorCaesar Wang <wxt@rock-chips.com>
Mon, 9 Nov 2015 04:49:01 +0000 (12:49 +0800)
committerHeiko Stuebner <heiko@sntech.de>
Sat, 21 Nov 2015 16:39:04 +0000 (17:39 +0100)
This patch add the thermal needed info on RK3368.
Meanwhile, support the trips to throttle for thermal.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
arch/arm64/boot/dts/rockchip/rk3368.dtsi

index 1f10b85b64abe45a99002484acbf53ce4406b802..02fe8718d6f08426f3e711ad21caff203bfbb0ac 100644 (file)
@@ -45,6 +45,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
        compatible = "rockchip,rk3368";
                        reg = <0x0 0x0>;
                        cpu-idle-states = <&cpu_sleep>;
                        enable-method = "psci";
+
+                       #cooling-cells = <2>; /* min followed by max */
                };
 
                cpu_l1: cpu@1 {
                        reg = <0x0 0x100>;
                        cpu-idle-states = <&cpu_sleep>;
                        enable-method = "psci";
+
+                       #cooling-cells = <2>; /* min followed by max */
                };
 
                cpu_b1: cpu@101 {
                status = "disabled";
        };
 
+       thermal-zones {
+               #include "rk3368-thermal.dtsi"
+       };
+
+       tsadc: tsadc@ff280000 {
+               compatible = "rockchip,rk3368-tsadc";
+               reg = <0x0 0xff280000 0x0 0x100>;
+               interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+               clock-names = "tsadc", "apb_pclk";
+               resets = <&cru SRST_TSADC>;
+               reset-names = "tsadc-apb";
+               pinctrl-names = "init", "default", "sleep";
+               pinctrl-0 = <&otp_gpio>;
+               pinctrl-1 = <&otp_out>;
+               pinctrl-2 = <&otp_gpio>;
+               #thermal-sensor-cells = <1>;
+               rockchip,hw-tshut-temp = <95000>;
+               status = "disabled";
+       };
+
        gmac: ethernet@ff290000 {
                compatible = "rockchip,rk3368-gmac";
                reg = <0x0 0xff290000 0x0 0x10000>;
                        };
                };
 
+               tsadc {
+                       otp_gpio: otp-gpio {
+                               rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+                       };
+
+                       otp_out: otp-out {
+                               rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
+                       };
+               };
+
                uart0 {
                        uart0_xfer: uart0-xfer {
                                rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>,
This page took 0.028856 seconds and 5 git commands to generate.