From: Jose Alberto Reguero <jareguero@telefonica.net>
Date: Sun, 3 Feb 2013 22:40:24 +0000 (-0300)
Subject: [media] [PATH,2/2] mxl5007 move loop_thru to attach
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=02f9cf96df57575acea2e6eb4041e9f3ecd32548;p=deliverable%2Flinux.git

[media] [PATH,2/2] mxl5007 move loop_thru to attach

This patch move the loop_thru configuration to the attach function,
because with dual tuners until loop_tru configuration the other tuner
don't work.

Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
---

diff --git a/drivers/media/tuners/mxl5007t.c b/drivers/media/tuners/mxl5007t.c
index eb61304c260d..1810ad66888e 100644
--- a/drivers/media/tuners/mxl5007t.c
+++ b/drivers/media/tuners/mxl5007t.c
@@ -374,7 +374,6 @@ static struct reg_pair_t *mxl5007t_calc_init_regs(struct mxl5007t_state *state,
 	mxl5007t_set_if_freq_bits(state, cfg->if_freq_hz, cfg->invert_if);
 	mxl5007t_set_xtal_freq_bits(state, cfg->xtal_freq_hz);
 
-	set_reg_bits(state->tab_init, 0x04, 0x01, cfg->loop_thru_enable);
 	set_reg_bits(state->tab_init, 0x03, 0x08, cfg->clk_out_enable << 3);
 	set_reg_bits(state->tab_init, 0x03, 0x07, cfg->clk_out_amp);
 
@@ -902,6 +901,18 @@ struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
 
 	ret = mxl5007t_soft_reset(state);
 
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	if (mxl_fail(ret))
+		goto fail;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	ret = mxl5007t_write_reg(state, 0x04,
+		state->config->loop_thru_enable);
+
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 0);