From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Mon, 10 Feb 2014 18:49:36 +0000 (-0700)
Subject: staging: comedi: rtd520: use comedi_timeout()
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=051448c5257d5645db0edd70b43cc27485f133fa;p=deliverable%2Flinux.git

staging: comedi: rtd520: use comedi_timeout()

Use comedi_timeout() to wait for the analog input and output end-of-
conversions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 0e83e7e80b49..cd3fdf973bdd 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -237,20 +237,6 @@
 /* The board support a channel list up to the FIFO length (1K or 8K) */
 #define RTD_MAX_CHANLIST	128	/* max channel list that we allow */
 
-/* tuning for ai/ao instruction done polling */
-#ifdef FAST_SPIN
-#define WAIT_QUIETLY		/* as nothing, spin on done bit */
-#define RTD_ADC_TIMEOUT	66000	/* 2 msec at 33mhz bus rate */
-#define RTD_DAC_TIMEOUT	66000
-#define RTD_DMA_TIMEOUT	33000	/* 1 msec */
-#else
-/* by delaying, power and electrical noise are reduced somewhat */
-#define WAIT_QUIETLY	udelay(1)
-#define RTD_ADC_TIMEOUT	2000	/* in usec */
-#define RTD_DAC_TIMEOUT	2000	/* in usec */
-#define RTD_DMA_TIMEOUT	1000	/* in usec */
-#endif
-
 /*======================================================================
   Board specific stuff
 ======================================================================*/
@@ -562,21 +548,27 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
 	return fifo_size;
 }
 
-/*
-  "instructions" read/write data in "one-shot" or "software-triggered"
-  mode (simplest case).
-  This doesn't use interrupts.
+static int rtd_ai_eoc(struct comedi_device *dev,
+		      struct comedi_subdevice *s,
+		      struct comedi_insn *insn,
+		      unsigned long context)
+{
+	struct rtd_private *devpriv = dev->private;
+	unsigned int status;
+
+	status = readl(devpriv->las0 + LAS0_ADC);
+	if (status & FS_ADC_NOT_EMPTY)
+		return 0;
+	return -EBUSY;
+}
 
-  Note, we don't do any settling delays.  Use a instruction list to
-  select, delay, then read.
- */
 static int rtd_ai_rinsn(struct comedi_device *dev,
 			struct comedi_subdevice *s, struct comedi_insn *insn,
 			unsigned int *data)
 {
 	struct rtd_private *devpriv = dev->private;
-	int n, ii;
-	int stat;
+	int ret;
+	int n;
 
 	/* clear any old fifo data */
 	writel(0, devpriv->las0 + LAS0_ADC_FIFO_CLEAR);
@@ -593,14 +585,9 @@ static int rtd_ai_rinsn(struct comedi_device *dev,
 		/* trigger conversion */
 		writew(0, devpriv->las0 + LAS0_ADC);
 
-		for (ii = 0; ii < RTD_ADC_TIMEOUT; ++ii) {
-			stat = readl(devpriv->las0 + LAS0_ADC);
-			if (stat & FS_ADC_NOT_EMPTY)	/* 1 -> not empty */
-				break;
-			WAIT_QUIETLY;
-		}
-		if (ii >= RTD_ADC_TIMEOUT)
-			return -ETIMEDOUT;
+		ret = comedi_timeout(dev, s, insn, rtd_ai_eoc, 0);
+		if (ret)
+			return ret;
 
 		/* read data */
 		d = readw(devpriv->las1 + LAS1_ADC_FIFO);
@@ -1116,9 +1103,22 @@ static int rtd_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 	return 0;
 }
 
-/*
-  Output one (or more) analog values to a single port as fast as possible.
-*/
+static int rtd_ao_eoc(struct comedi_device *dev,
+		      struct comedi_subdevice *s,
+		      struct comedi_insn *insn,
+		      unsigned long context)
+{
+	struct rtd_private *devpriv = dev->private;
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	unsigned int bit = (chan == 0) ? FS_DAC1_NOT_EMPTY : FS_DAC2_NOT_EMPTY;
+	unsigned int status;
+
+	status = readl(devpriv->las0 + LAS0_ADC);
+	if (status & bit)
+		return 0;
+	return -EBUSY;
+}
+
 static int rtd_ao_winsn(struct comedi_device *dev,
 			struct comedi_subdevice *s, struct comedi_insn *insn,
 			unsigned int *data)
@@ -1127,6 +1127,7 @@ static int rtd_ao_winsn(struct comedi_device *dev,
 	int i;
 	int chan = CR_CHAN(insn->chanspec);
 	int range = CR_RANGE(insn->chanspec);
+	int ret;
 
 	/* Configure the output range (table index matches the range values) */
 	writew(range & 7, devpriv->las0 +
@@ -1136,8 +1137,6 @@ static int rtd_ao_winsn(struct comedi_device *dev,
 	 * very useful, but that's how the interface is defined. */
 	for (i = 0; i < insn->n; ++i) {
 		int val = data[i] << 3;
-		int stat = 0;	/* initialize to avoid bogus warning */
-		int ii;
 
 		/* VERIFY: comedi range and offset conversions */
 
@@ -1157,16 +1156,9 @@ static int rtd_ao_winsn(struct comedi_device *dev,
 
 		devpriv->ao_readback[chan] = data[i];
 
-		for (ii = 0; ii < RTD_DAC_TIMEOUT; ++ii) {
-			stat = readl(devpriv->las0 + LAS0_ADC);
-			/* 1 -> not empty */
-			if (stat & ((0 == chan) ? FS_DAC1_NOT_EMPTY :
-				    FS_DAC2_NOT_EMPTY))
-				break;
-			WAIT_QUIETLY;
-		}
-		if (ii >= RTD_DAC_TIMEOUT)
-			return -ETIMEDOUT;
+		ret = comedi_timeout(dev, s, insn, rtd_ao_eoc, 0);
+		if (ret)
+			return ret;
 	}
 
 	/* return the number of samples read/written */