From: Jens Taprogge Date: Thu, 27 Sep 2012 10:37:39 +0000 (+0200) Subject: staging: ipack: Rename bridges to carriers. X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=052c4cfc92f5ce6334fdaf6926e7c177bc1cc099;p=deliverable%2Flinux.git staging: ipack: Rename bridges to carriers. This is the name used by the standard. Signed-off-by: Jens Taprogge Signed-off-by: Samuel Iglesias Gonsalvez Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/ipack/Kconfig b/drivers/staging/ipack/Kconfig index 4cf47066140c..9b4495a35f91 100644 --- a/drivers/staging/ipack/Kconfig +++ b/drivers/staging/ipack/Kconfig @@ -14,7 +14,7 @@ menuconfig IPACK_BUS if IPACK_BUS -source "drivers/staging/ipack/bridges/Kconfig" +source "drivers/staging/ipack/carriers/Kconfig" source "drivers/staging/ipack/devices/Kconfig" diff --git a/drivers/staging/ipack/Makefile b/drivers/staging/ipack/Makefile index 85ff223616fd..6f14ade0f8f3 100644 --- a/drivers/staging/ipack/Makefile +++ b/drivers/staging/ipack/Makefile @@ -3,4 +3,4 @@ # obj-$(CONFIG_IPACK_BUS) += ipack.o obj-y += devices/ -obj-y += bridges/ +obj-y += carriers/ diff --git a/drivers/staging/ipack/bridges/Kconfig b/drivers/staging/ipack/bridges/Kconfig deleted file mode 100644 index 33fdc2456c0c..000000000000 --- a/drivers/staging/ipack/bridges/Kconfig +++ /dev/null @@ -1,7 +0,0 @@ -config BOARD_TPCI200 - tristate "TEWS TPCI-200 support for IndustryPack bus" - depends on IPACK_BUS - depends on PCI - help - This driver supports the TEWS TPCI200 device for the IndustryPack bus. - default n diff --git a/drivers/staging/ipack/bridges/Makefile b/drivers/staging/ipack/bridges/Makefile deleted file mode 100644 index d8b76459300f..000000000000 --- a/drivers/staging/ipack/bridges/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_BOARD_TPCI200) += tpci200.o diff --git a/drivers/staging/ipack/bridges/tpci200.c b/drivers/staging/ipack/bridges/tpci200.c deleted file mode 100644 index 376e79410e99..000000000000 --- a/drivers/staging/ipack/bridges/tpci200.c +++ /dev/null @@ -1,634 +0,0 @@ -/** - * tpci200.c - * - * driver for the TEWS TPCI-200 device - * Copyright (c) 2009 Nicolas Serafini, EIC2 SA - * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez , CERN - * Copyright (c) 2012 Samuel Iglesias Gonsalvez , Igalia - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2 of the License. - */ - -#include -#include "tpci200.h" - -static const u16 tpci200_status_timeout[] = { - TPCI200_A_TIMEOUT, - TPCI200_B_TIMEOUT, - TPCI200_C_TIMEOUT, - TPCI200_D_TIMEOUT, -}; - -static const u16 tpci200_status_error[] = { - TPCI200_A_ERROR, - TPCI200_B_ERROR, - TPCI200_C_ERROR, - TPCI200_D_ERROR, -}; - -static const size_t tpci200_space_size[IPACK_SPACE_COUNT] = { - [IPACK_IO_SPACE] = TPCI200_IO_SPACE_SIZE, - [IPACK_ID_SPACE] = TPCI200_ID_SPACE_SIZE, - [IPACK_INT_SPACE] = TPCI200_INT_SPACE_SIZE, - [IPACK_MEM8_SPACE] = TPCI200_MEM8_SPACE_SIZE, - [IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_SIZE, -}; - -static const size_t tpci200_space_interval[IPACK_SPACE_COUNT] = { - [IPACK_IO_SPACE] = TPCI200_IO_SPACE_INTERVAL, - [IPACK_ID_SPACE] = TPCI200_ID_SPACE_INTERVAL, - [IPACK_INT_SPACE] = TPCI200_INT_SPACE_INTERVAL, - [IPACK_MEM8_SPACE] = TPCI200_MEM8_SPACE_INTERVAL, - [IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_INTERVAL, -}; - -static struct tpci200_board *check_slot(struct ipack_device *dev) -{ - struct tpci200_board *tpci200; - - if (dev == NULL) - return NULL; - - - tpci200 = dev_get_drvdata(dev->bus->parent); - - if (tpci200 == NULL) { - dev_info(&dev->dev, "carrier board not found\n"); - return NULL; - } - - if (dev->slot >= TPCI200_NB_SLOT) { - dev_info(&dev->dev, - "Slot [%d:%d] doesn't exist! Last tpci200 slot is %d.\n", - dev->bus->bus_nr, dev->slot, TPCI200_NB_SLOT-1); - return NULL; - } - - return tpci200; -} - -static void tpci200_clear_mask(struct tpci200_board *tpci200, - __le16 __iomem *addr, u16 mask) -{ - unsigned long flags; - spin_lock_irqsave(&tpci200->regs_lock, flags); - iowrite16(ioread16(addr) & (~mask), addr); - spin_unlock_irqrestore(&tpci200->regs_lock, flags); -} - -static void tpci200_set_mask(struct tpci200_board *tpci200, - __le16 __iomem *addr, u16 mask) -{ - unsigned long flags; - spin_lock_irqsave(&tpci200->regs_lock, flags); - iowrite16(ioread16(addr) | mask, addr); - spin_unlock_irqrestore(&tpci200->regs_lock, flags); -} - -static void tpci200_unregister(struct tpci200_board *tpci200) -{ - free_irq(tpci200->info->pdev->irq, (void *) tpci200); - - pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs); - pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs); - - pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR); - pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR); - pci_release_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR); - pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR); - pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR); - - pci_disable_device(tpci200->info->pdev); - pci_dev_put(tpci200->info->pdev); -} - -static void tpci200_enable_irq(struct tpci200_board *tpci200, - int islot) -{ - tpci200_set_mask(tpci200, - &tpci200->info->interface_regs->control[islot], - TPCI200_INT0_EN | TPCI200_INT1_EN); -} - -static void tpci200_disable_irq(struct tpci200_board *tpci200, - int islot) -{ - tpci200_clear_mask(tpci200, - &tpci200->info->interface_regs->control[islot], - TPCI200_INT0_EN | TPCI200_INT1_EN); -} - -static irqreturn_t tpci200_slot_irq(struct slot_irq *slot_irq) -{ - irqreturn_t ret; - - if (!slot_irq) - return -ENODEV; - ret = slot_irq->handler(slot_irq->arg); - - return ret; -} - -static irqreturn_t tpci200_interrupt(int irq, void *dev_id) -{ - struct tpci200_board *tpci200 = (struct tpci200_board *) dev_id; - struct slot_irq *slot_irq; - irqreturn_t ret; - u16 status_reg; - int i; - - /* Read status register */ - status_reg = ioread16(&tpci200->info->interface_regs->status); - - /* Did we cause the interrupt? */ - if (!(status_reg & TPCI200_SLOT_INT_MASK)) - return IRQ_NONE; - - /* callback to the IRQ handler for the corresponding slot */ - rcu_read_lock(); - for (i = 0; i < TPCI200_NB_SLOT; i++) { - if (!(status_reg & ((TPCI200_A_INT0 | TPCI200_A_INT1) << (2 * i)))) - continue; - slot_irq = rcu_dereference(tpci200->slots[i].irq); - ret = tpci200_slot_irq(slot_irq); - if (ret == -ENODEV) { - dev_info(&tpci200->info->pdev->dev, - "No registered ISR for slot [%d:%d]!. IRQ will be disabled.\n", - tpci200->number, i); - tpci200_disable_irq(tpci200, i); - } - } - rcu_read_unlock(); - - return IRQ_HANDLED; -} - -static int tpci200_free_irq(struct ipack_device *dev) -{ - struct slot_irq *slot_irq; - struct tpci200_board *tpci200; - - tpci200 = check_slot(dev); - if (tpci200 == NULL) - return -EINVAL; - - if (mutex_lock_interruptible(&tpci200->mutex)) - return -ERESTARTSYS; - - if (tpci200->slots[dev->slot].irq == NULL) { - mutex_unlock(&tpci200->mutex); - return -EINVAL; - } - - tpci200_disable_irq(tpci200, dev->slot); - slot_irq = tpci200->slots[dev->slot].irq; - /* uninstall handler */ - RCU_INIT_POINTER(tpci200->slots[dev->slot].irq, NULL); - synchronize_rcu(); - kfree(slot_irq); - mutex_unlock(&tpci200->mutex); - return 0; -} - -static int tpci200_request_irq(struct ipack_device *dev, - irqreturn_t (*handler)(void *), void *arg) -{ - int res = 0; - struct slot_irq *slot_irq; - struct tpci200_board *tpci200; - - tpci200 = check_slot(dev); - if (tpci200 == NULL) - return -EINVAL; - - if (mutex_lock_interruptible(&tpci200->mutex)) - return -ERESTARTSYS; - - if (tpci200->slots[dev->slot].irq != NULL) { - dev_err(&dev->dev, - "Slot [%d:%d] IRQ already registered !\n", dev->bus->bus_nr, - dev->slot); - res = -EINVAL; - goto out_unlock; - } - - slot_irq = kzalloc(sizeof(struct slot_irq), GFP_KERNEL); - if (slot_irq == NULL) { - dev_err(&dev->dev, - "Slot [%d:%d] unable to allocate memory for IRQ !\n", - dev->bus->bus_nr, dev->slot); - res = -ENOMEM; - goto out_unlock; - } - - /* - * WARNING: Setup Interrupt Vector in the IndustryPack device - * before an IRQ request. - * Read the User Manual of your IndustryPack device to know - * where to write the vector in memory. - */ - slot_irq->handler = handler; - slot_irq->arg = arg; - slot_irq->holder = dev; - - rcu_assign_pointer(tpci200->slots[dev->slot].irq, slot_irq); - tpci200_enable_irq(tpci200, dev->slot); - -out_unlock: - mutex_unlock(&tpci200->mutex); - return res; -} - -static int tpci200_register(struct tpci200_board *tpci200) -{ - int i; - int res; - phys_addr_t ioidint_base; - unsigned short slot_ctrl; - - if (pci_enable_device(tpci200->info->pdev) < 0) - return -ENODEV; - - /* Request IP interface register (Bar 2) */ - res = pci_request_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR, - "Carrier IP interface registers"); - if (res) { - dev_err(&tpci200->info->pdev->dev, - "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 2 !", - tpci200->info->pdev->bus->number, - tpci200->info->pdev->devfn); - goto out_disable_pci; - } - - /* Request IO ID INT space (Bar 3) */ - res = pci_request_region(tpci200->info->pdev, - TPCI200_IO_ID_INT_SPACES_BAR, - "Carrier IO ID INT space"); - if (res) { - dev_err(&tpci200->info->pdev->dev, - "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 3 !", - tpci200->info->pdev->bus->number, - tpci200->info->pdev->devfn); - goto out_release_ip_space; - } - - /* Request MEM8 space (Bar 5) */ - res = pci_request_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR, - "Carrier MEM8 space"); - if (res) { - dev_err(&tpci200->info->pdev->dev, - "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 5!", - tpci200->info->pdev->bus->number, - tpci200->info->pdev->devfn); - goto out_release_ioid_int_space; - } - - /* Request MEM16 space (Bar 4) */ - res = pci_request_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR, - "Carrier MEM16 space"); - if (res) { - dev_err(&tpci200->info->pdev->dev, - "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 4!", - tpci200->info->pdev->bus->number, - tpci200->info->pdev->devfn); - goto out_release_mem8_space; - } - - /* Map internal tpci200 driver user space */ - tpci200->info->interface_regs = - ioremap_nocache(pci_resource_start(tpci200->info->pdev, - TPCI200_IP_INTERFACE_BAR), - TPCI200_IFACE_SIZE); - - /* Initialize lock that protects interface_regs */ - spin_lock_init(&tpci200->regs_lock); - - ioidint_base = pci_resource_start(tpci200->info->pdev, - TPCI200_IO_ID_INT_SPACES_BAR); - tpci200->mod_mem[IPACK_IO_SPACE] = ioidint_base + TPCI200_IO_SPACE_OFF; - tpci200->mod_mem[IPACK_ID_SPACE] = ioidint_base + TPCI200_ID_SPACE_OFF; - tpci200->mod_mem[IPACK_INT_SPACE] = - ioidint_base + TPCI200_INT_SPACE_OFF; - tpci200->mod_mem[IPACK_MEM8_SPACE] = - pci_resource_start(tpci200->info->pdev, - TPCI200_MEM8_SPACE_BAR); - tpci200->mod_mem[IPACK_MEM16_SPACE] = - pci_resource_start(tpci200->info->pdev, - TPCI200_MEM16_SPACE_BAR); - - /* Set the default parameters of the slot - * INT0 disabled, level sensitive - * INT1 disabled, level sensitive - * error interrupt disabled - * timeout interrupt disabled - * recover time disabled - * clock rate 8 MHz - */ - slot_ctrl = 0; - for (i = 0; i < TPCI200_NB_SLOT; i++) - writew(slot_ctrl, &tpci200->info->interface_regs->control[i]); - - res = request_irq(tpci200->info->pdev->irq, - tpci200_interrupt, IRQF_SHARED, - KBUILD_MODNAME, (void *) tpci200); - if (res) { - dev_err(&tpci200->info->pdev->dev, - "(bn 0x%X, sn 0x%X) unable to register IRQ !", - tpci200->info->pdev->bus->number, - tpci200->info->pdev->devfn); - goto out_release_ioid_int_space; - } - - return 0; - -out_release_mem8_space: - pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR); -out_release_ioid_int_space: - pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR); -out_release_ip_space: - pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR); -out_disable_pci: - pci_disable_device(tpci200->info->pdev); - return res; -} - -static int tpci200_get_clockrate(struct ipack_device *dev) -{ - struct tpci200_board *tpci200 = check_slot(dev); - __le16 __iomem *addr; - - if (!tpci200) - return -ENODEV; - - addr = &tpci200->info->interface_regs->control[dev->slot]; - return (ioread16(addr) & TPCI200_CLK32) ? 32 : 8; -} - -static int tpci200_set_clockrate(struct ipack_device *dev, int mherz) -{ - struct tpci200_board *tpci200 = check_slot(dev); - __le16 __iomem *addr; - - if (!tpci200) - return -ENODEV; - - addr = &tpci200->info->interface_regs->control[dev->slot]; - - switch (mherz) { - case 8: - tpci200_clear_mask(tpci200, addr, TPCI200_CLK32); - break; - case 32: - tpci200_set_mask(tpci200, addr, TPCI200_CLK32); - break; - default: - return -EINVAL; - } - return 0; -} - -static int tpci200_get_error(struct ipack_device *dev) -{ - struct tpci200_board *tpci200 = check_slot(dev); - __le16 __iomem *addr; - u16 mask; - - if (!tpci200) - return -ENODEV; - - addr = &tpci200->info->interface_regs->status; - mask = tpci200_status_error[dev->slot]; - return (ioread16(addr) & mask) ? 1 : 0; -} - -static int tpci200_get_timeout(struct ipack_device *dev) -{ - struct tpci200_board *tpci200 = check_slot(dev); - __le16 __iomem *addr; - u16 mask; - - if (!tpci200) - return -ENODEV; - - addr = &tpci200->info->interface_regs->status; - mask = tpci200_status_timeout[dev->slot]; - - return (ioread16(addr) & mask) ? 1 : 0; -} - -static int tpci200_reset_timeout(struct ipack_device *dev) -{ - struct tpci200_board *tpci200 = check_slot(dev); - __le16 __iomem *addr; - u16 mask; - - if (!tpci200) - return -ENODEV; - - addr = &tpci200->info->interface_regs->status; - mask = tpci200_status_timeout[dev->slot]; - - iowrite16(mask, addr); - return 0; -} - -static void tpci200_uninstall(struct tpci200_board *tpci200) -{ - tpci200_unregister(tpci200); - kfree(tpci200->slots); -} - -static const struct ipack_bus_ops tpci200_bus_ops = { - .request_irq = tpci200_request_irq, - .free_irq = tpci200_free_irq, - .get_clockrate = tpci200_get_clockrate, - .set_clockrate = tpci200_set_clockrate, - .get_error = tpci200_get_error, - .get_timeout = tpci200_get_timeout, - .reset_timeout = tpci200_reset_timeout, -}; - -static int tpci200_install(struct tpci200_board *tpci200) -{ - int res; - - tpci200->slots = kzalloc( - TPCI200_NB_SLOT * sizeof(struct tpci200_slot), GFP_KERNEL); - if (tpci200->slots == NULL) - return -ENOMEM; - - res = tpci200_register(tpci200); - if (res) { - kfree(tpci200->slots); - tpci200->slots = NULL; - return res; - } - - mutex_init(&tpci200->mutex); - return 0; -} - -static void tpci200_release_device(struct ipack_device *dev) -{ - kfree(dev); -} - -static int tpci200_create_device(struct tpci200_board *tpci200, int i) -{ - enum ipack_space space; - struct ipack_device *dev = - kzalloc(sizeof(struct ipack_device), GFP_KERNEL); - if (!dev) - return -ENOMEM; - dev->slot = i; - dev->bus = tpci200->info->ipack_bus; - dev->release = tpci200_release_device; - - for (space = 0; space < IPACK_SPACE_COUNT; space++) { - dev->region[space].start = - tpci200->mod_mem[space] - + tpci200_space_interval[space] * i; - dev->region[space].size = tpci200_space_size[space]; - } - return ipack_device_register(dev); -} - -static int tpci200_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - int ret, i; - struct tpci200_board *tpci200; - u32 reg32; - - tpci200 = kzalloc(sizeof(struct tpci200_board), GFP_KERNEL); - if (!tpci200) - return -ENOMEM; - - tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL); - if (!tpci200->info) { - ret = -ENOMEM; - goto out_err_info; - } - - pci_dev_get(pdev); - - /* Obtain a mapping of the carrier's PCI configuration registers */ - ret = pci_request_region(pdev, TPCI200_CFG_MEM_BAR, - KBUILD_MODNAME " Configuration Memory"); - if (ret) { - dev_err(&pdev->dev, "Failed to allocate PCI Configuration Memory"); - ret = -EBUSY; - goto out_err_pci_request; - } - tpci200->info->cfg_regs = ioremap_nocache( - pci_resource_start(pdev, TPCI200_CFG_MEM_BAR), - pci_resource_len(pdev, TPCI200_CFG_MEM_BAR)); - if (!tpci200->info->cfg_regs) { - dev_err(&pdev->dev, "Failed to map PCI Configuration Memory"); - ret = -EFAULT; - goto out_err_ioremap; - } - - /* Disable byte swapping for 16 bit IP module access. This will ensure - * that the Industrypack big endian byte order is preserved by the - * carrier. */ - reg32 = ioread32(tpci200->info->cfg_regs + LAS1_DESC); - reg32 |= 1 << LAS_BIT_BIGENDIAN; - iowrite32(reg32, tpci200->info->cfg_regs + LAS1_DESC); - - reg32 = ioread32(tpci200->info->cfg_regs + LAS2_DESC); - reg32 |= 1 << LAS_BIT_BIGENDIAN; - iowrite32(reg32, tpci200->info->cfg_regs + LAS2_DESC); - - /* Save struct pci_dev pointer */ - tpci200->info->pdev = pdev; - tpci200->info->id_table = (struct pci_device_id *)id; - - /* register the device and initialize it */ - ret = tpci200_install(tpci200); - if (ret) { - dev_err(&pdev->dev, "error during tpci200 install\n"); - ret = -ENODEV; - goto out_err_install; - } - - /* Register the carrier in the industry pack bus driver */ - tpci200->info->ipack_bus = ipack_bus_register(&pdev->dev, - TPCI200_NB_SLOT, - &tpci200_bus_ops); - if (!tpci200->info->ipack_bus) { - dev_err(&pdev->dev, - "error registering the carrier on ipack driver\n"); - ret = -EFAULT; - goto out_err_bus_register; - } - - /* save the bus number given by ipack to logging purpose */ - tpci200->number = tpci200->info->ipack_bus->bus_nr; - dev_set_drvdata(&pdev->dev, tpci200); - - for (i = 0; i < TPCI200_NB_SLOT; i++) - tpci200_create_device(tpci200, i); - return 0; - -out_err_bus_register: - tpci200_uninstall(tpci200); -out_err_install: - iounmap(tpci200->info->cfg_regs); -out_err_ioremap: - pci_release_region(pdev, TPCI200_CFG_MEM_BAR); -out_err_pci_request: - pci_dev_put(pdev); - kfree(tpci200->info); -out_err_info: - kfree(tpci200); - return ret; -} - -static void __tpci200_pci_remove(struct tpci200_board *tpci200) -{ - ipack_bus_unregister(tpci200->info->ipack_bus); - tpci200_uninstall(tpci200); - - kfree(tpci200->info); - kfree(tpci200); -} - -static void __devexit tpci200_pci_remove(struct pci_dev *dev) -{ - struct tpci200_board *tpci200 = pci_get_drvdata(dev); - - __tpci200_pci_remove(tpci200); -} - -static DEFINE_PCI_DEVICE_TABLE(tpci200_idtable) = { - { TPCI200_VENDOR_ID, TPCI200_DEVICE_ID, TPCI200_SUBVENDOR_ID, - TPCI200_SUBDEVICE_ID }, - { 0, }, -}; - -MODULE_DEVICE_TABLE(pci, tpci200_idtable); - -static struct pci_driver tpci200_pci_drv = { - .name = "tpci200", - .id_table = tpci200_idtable, - .probe = tpci200_pci_probe, - .remove = __devexit_p(tpci200_pci_remove), -}; - -static int __init tpci200_drvr_init_module(void) -{ - return pci_register_driver(&tpci200_pci_drv); -} - -static void __exit tpci200_drvr_exit_module(void) -{ - pci_unregister_driver(&tpci200_pci_drv); -} - -MODULE_DESCRIPTION("TEWS TPCI-200 device driver"); -MODULE_LICENSE("GPL"); -module_init(tpci200_drvr_init_module); -module_exit(tpci200_drvr_exit_module); diff --git a/drivers/staging/ipack/bridges/tpci200.h b/drivers/staging/ipack/bridges/tpci200.h deleted file mode 100644 index 982f31920af5..000000000000 --- a/drivers/staging/ipack/bridges/tpci200.h +++ /dev/null @@ -1,167 +0,0 @@ -/** - * tpci200.h - * - * driver for the carrier TEWS TPCI-200 - * Copyright (c) 2009 Nicolas Serafini, EIC2 SA - * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez , CERN - * Copyright (c) 2012 Samuel Iglesias Gonsalvez , Igalia - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2 of the License. - */ - -#ifndef _TPCI200_H_ -#define _TPCI200_H_ - -#include -#include -#include -#include -#include - -#include "../ipack.h" - -#define TPCI200_NB_SLOT 0x4 -#define TPCI200_NB_BAR 0x6 - -#define TPCI200_VENDOR_ID 0x1498 -#define TPCI200_DEVICE_ID 0x30C8 -#define TPCI200_SUBVENDOR_ID 0x1498 -#define TPCI200_SUBDEVICE_ID 0x300A - -#define TPCI200_CFG_MEM_BAR 0 -#define TPCI200_IP_INTERFACE_BAR 2 -#define TPCI200_IO_ID_INT_SPACES_BAR 3 -#define TPCI200_MEM16_SPACE_BAR 4 -#define TPCI200_MEM8_SPACE_BAR 5 - -struct tpci200_regs { - __le16 revision; - /* writes to control should occur with the mutex held to protect - * read-modify-write operations */ - __le16 control[4]; - __le16 reset; - __le16 status; - u8 reserved[242]; -} __packed; - -#define TPCI200_IFACE_SIZE 0x100 - -#define TPCI200_IO_SPACE_OFF 0x0000 -#define TPCI200_IO_SPACE_INTERVAL 0x0100 -#define TPCI200_IO_SPACE_SIZE 0x0080 -#define TPCI200_ID_SPACE_OFF 0x0080 -#define TPCI200_ID_SPACE_INTERVAL 0x0100 -#define TPCI200_ID_SPACE_SIZE 0x0040 -#define TPCI200_INT_SPACE_OFF 0x00C0 -#define TPCI200_INT_SPACE_INTERVAL 0x0100 -#define TPCI200_INT_SPACE_SIZE 0x0040 -#define TPCI200_IOIDINT_SIZE 0x0400 - -#define TPCI200_MEM8_SPACE_INTERVAL 0x00400000 -#define TPCI200_MEM8_SPACE_SIZE 0x00400000 -#define TPCI200_MEM16_SPACE_INTERVAL 0x00800000 -#define TPCI200_MEM16_SPACE_SIZE 0x00800000 - -/* control field in tpci200_regs */ -#define TPCI200_INT0_EN 0x0040 -#define TPCI200_INT1_EN 0x0080 -#define TPCI200_INT0_EDGE 0x0010 -#define TPCI200_INT1_EDGE 0x0020 -#define TPCI200_ERR_INT_EN 0x0008 -#define TPCI200_TIME_INT_EN 0x0004 -#define TPCI200_RECOVER_EN 0x0002 -#define TPCI200_CLK32 0x0001 - -/* reset field in tpci200_regs */ -#define TPCI200_A_RESET 0x0001 -#define TPCI200_B_RESET 0x0002 -#define TPCI200_C_RESET 0x0004 -#define TPCI200_D_RESET 0x0008 - -/* status field in tpci200_regs */ -#define TPCI200_A_TIMEOUT 0x1000 -#define TPCI200_B_TIMEOUT 0x2000 -#define TPCI200_C_TIMEOUT 0x4000 -#define TPCI200_D_TIMEOUT 0x8000 - -#define TPCI200_A_ERROR 0x0100 -#define TPCI200_B_ERROR 0x0200 -#define TPCI200_C_ERROR 0x0400 -#define TPCI200_D_ERROR 0x0800 - -#define TPCI200_A_INT0 0x0001 -#define TPCI200_A_INT1 0x0002 -#define TPCI200_B_INT0 0x0004 -#define TPCI200_B_INT1 0x0008 -#define TPCI200_C_INT0 0x0010 -#define TPCI200_C_INT1 0x0020 -#define TPCI200_D_INT0 0x0040 -#define TPCI200_D_INT1 0x0080 - -#define TPCI200_SLOT_INT_MASK 0x00FF - -/* PCI Configuration registers. The PCI bridge is a PLX Technology PCI9030. */ -#define LAS1_DESC 0x2C -#define LAS2_DESC 0x30 - -/* Bits in the LAS?_DESC registers */ -#define LAS_BIT_BIGENDIAN 24 - -#define VME_IOID_SPACE "IOID" -#define VME_MEM_SPACE "MEM" - -/** - * struct slot_irq - slot IRQ definition. - * @vector Vector number - * @handler Handler called when IRQ arrives - * @arg Handler argument - * - */ -struct slot_irq { - struct ipack_device *holder; - int vector; - irqreturn_t (*handler)(void *); - void *arg; -}; - -/** - * struct tpci200_slot - data specific to the tpci200 slot. - * @slot_id Slot identification gived to external interface - * @irq Slot IRQ infos - * @io_phys IO physical base address register of the slot - * @id_phys ID physical base address register of the slot - * @int_phys INT physical base address register of the slot - * @mem_phys MEM physical base address register of the slot - * - */ -struct tpci200_slot { - struct slot_irq *irq; -}; - -/** - * struct tpci200_infos - informations specific of the TPCI200 tpci200. - * @pci_dev PCI device - * @interface_regs Pointer to IP interface space (Bar 2) - * @ioidint_space Pointer to IP ID, IO and INT space (Bar 3) - * @mem8_space Pointer to MEM space (Bar 4) - * - */ -struct tpci200_infos { - struct pci_dev *pdev; - struct pci_device_id *id_table; - struct tpci200_regs __iomem *interface_regs; - void __iomem *cfg_regs; - struct ipack_bus_device *ipack_bus; -}; -struct tpci200_board { - unsigned int number; - struct mutex mutex; - spinlock_t regs_lock; - struct tpci200_slot *slots; - struct tpci200_infos *info; - phys_addr_t mod_mem[IPACK_SPACE_COUNT]; -}; - -#endif /* _TPCI200_H_ */ diff --git a/drivers/staging/ipack/carriers/Kconfig b/drivers/staging/ipack/carriers/Kconfig new file mode 100644 index 000000000000..33fdc2456c0c --- /dev/null +++ b/drivers/staging/ipack/carriers/Kconfig @@ -0,0 +1,7 @@ +config BOARD_TPCI200 + tristate "TEWS TPCI-200 support for IndustryPack bus" + depends on IPACK_BUS + depends on PCI + help + This driver supports the TEWS TPCI200 device for the IndustryPack bus. + default n diff --git a/drivers/staging/ipack/carriers/Makefile b/drivers/staging/ipack/carriers/Makefile new file mode 100644 index 000000000000..d8b76459300f --- /dev/null +++ b/drivers/staging/ipack/carriers/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_BOARD_TPCI200) += tpci200.o diff --git a/drivers/staging/ipack/carriers/tpci200.c b/drivers/staging/ipack/carriers/tpci200.c new file mode 100644 index 000000000000..376e79410e99 --- /dev/null +++ b/drivers/staging/ipack/carriers/tpci200.c @@ -0,0 +1,634 @@ +/** + * tpci200.c + * + * driver for the TEWS TPCI-200 device + * Copyright (c) 2009 Nicolas Serafini, EIC2 SA + * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez , CERN + * Copyright (c) 2012 Samuel Iglesias Gonsalvez , Igalia + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ + +#include +#include "tpci200.h" + +static const u16 tpci200_status_timeout[] = { + TPCI200_A_TIMEOUT, + TPCI200_B_TIMEOUT, + TPCI200_C_TIMEOUT, + TPCI200_D_TIMEOUT, +}; + +static const u16 tpci200_status_error[] = { + TPCI200_A_ERROR, + TPCI200_B_ERROR, + TPCI200_C_ERROR, + TPCI200_D_ERROR, +}; + +static const size_t tpci200_space_size[IPACK_SPACE_COUNT] = { + [IPACK_IO_SPACE] = TPCI200_IO_SPACE_SIZE, + [IPACK_ID_SPACE] = TPCI200_ID_SPACE_SIZE, + [IPACK_INT_SPACE] = TPCI200_INT_SPACE_SIZE, + [IPACK_MEM8_SPACE] = TPCI200_MEM8_SPACE_SIZE, + [IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_SIZE, +}; + +static const size_t tpci200_space_interval[IPACK_SPACE_COUNT] = { + [IPACK_IO_SPACE] = TPCI200_IO_SPACE_INTERVAL, + [IPACK_ID_SPACE] = TPCI200_ID_SPACE_INTERVAL, + [IPACK_INT_SPACE] = TPCI200_INT_SPACE_INTERVAL, + [IPACK_MEM8_SPACE] = TPCI200_MEM8_SPACE_INTERVAL, + [IPACK_MEM16_SPACE] = TPCI200_MEM16_SPACE_INTERVAL, +}; + +static struct tpci200_board *check_slot(struct ipack_device *dev) +{ + struct tpci200_board *tpci200; + + if (dev == NULL) + return NULL; + + + tpci200 = dev_get_drvdata(dev->bus->parent); + + if (tpci200 == NULL) { + dev_info(&dev->dev, "carrier board not found\n"); + return NULL; + } + + if (dev->slot >= TPCI200_NB_SLOT) { + dev_info(&dev->dev, + "Slot [%d:%d] doesn't exist! Last tpci200 slot is %d.\n", + dev->bus->bus_nr, dev->slot, TPCI200_NB_SLOT-1); + return NULL; + } + + return tpci200; +} + +static void tpci200_clear_mask(struct tpci200_board *tpci200, + __le16 __iomem *addr, u16 mask) +{ + unsigned long flags; + spin_lock_irqsave(&tpci200->regs_lock, flags); + iowrite16(ioread16(addr) & (~mask), addr); + spin_unlock_irqrestore(&tpci200->regs_lock, flags); +} + +static void tpci200_set_mask(struct tpci200_board *tpci200, + __le16 __iomem *addr, u16 mask) +{ + unsigned long flags; + spin_lock_irqsave(&tpci200->regs_lock, flags); + iowrite16(ioread16(addr) | mask, addr); + spin_unlock_irqrestore(&tpci200->regs_lock, flags); +} + +static void tpci200_unregister(struct tpci200_board *tpci200) +{ + free_irq(tpci200->info->pdev->irq, (void *) tpci200); + + pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs); + pci_iounmap(tpci200->info->pdev, tpci200->info->cfg_regs); + + pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR); + pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR); + pci_release_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR); + pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR); + pci_release_region(tpci200->info->pdev, TPCI200_CFG_MEM_BAR); + + pci_disable_device(tpci200->info->pdev); + pci_dev_put(tpci200->info->pdev); +} + +static void tpci200_enable_irq(struct tpci200_board *tpci200, + int islot) +{ + tpci200_set_mask(tpci200, + &tpci200->info->interface_regs->control[islot], + TPCI200_INT0_EN | TPCI200_INT1_EN); +} + +static void tpci200_disable_irq(struct tpci200_board *tpci200, + int islot) +{ + tpci200_clear_mask(tpci200, + &tpci200->info->interface_regs->control[islot], + TPCI200_INT0_EN | TPCI200_INT1_EN); +} + +static irqreturn_t tpci200_slot_irq(struct slot_irq *slot_irq) +{ + irqreturn_t ret; + + if (!slot_irq) + return -ENODEV; + ret = slot_irq->handler(slot_irq->arg); + + return ret; +} + +static irqreturn_t tpci200_interrupt(int irq, void *dev_id) +{ + struct tpci200_board *tpci200 = (struct tpci200_board *) dev_id; + struct slot_irq *slot_irq; + irqreturn_t ret; + u16 status_reg; + int i; + + /* Read status register */ + status_reg = ioread16(&tpci200->info->interface_regs->status); + + /* Did we cause the interrupt? */ + if (!(status_reg & TPCI200_SLOT_INT_MASK)) + return IRQ_NONE; + + /* callback to the IRQ handler for the corresponding slot */ + rcu_read_lock(); + for (i = 0; i < TPCI200_NB_SLOT; i++) { + if (!(status_reg & ((TPCI200_A_INT0 | TPCI200_A_INT1) << (2 * i)))) + continue; + slot_irq = rcu_dereference(tpci200->slots[i].irq); + ret = tpci200_slot_irq(slot_irq); + if (ret == -ENODEV) { + dev_info(&tpci200->info->pdev->dev, + "No registered ISR for slot [%d:%d]!. IRQ will be disabled.\n", + tpci200->number, i); + tpci200_disable_irq(tpci200, i); + } + } + rcu_read_unlock(); + + return IRQ_HANDLED; +} + +static int tpci200_free_irq(struct ipack_device *dev) +{ + struct slot_irq *slot_irq; + struct tpci200_board *tpci200; + + tpci200 = check_slot(dev); + if (tpci200 == NULL) + return -EINVAL; + + if (mutex_lock_interruptible(&tpci200->mutex)) + return -ERESTARTSYS; + + if (tpci200->slots[dev->slot].irq == NULL) { + mutex_unlock(&tpci200->mutex); + return -EINVAL; + } + + tpci200_disable_irq(tpci200, dev->slot); + slot_irq = tpci200->slots[dev->slot].irq; + /* uninstall handler */ + RCU_INIT_POINTER(tpci200->slots[dev->slot].irq, NULL); + synchronize_rcu(); + kfree(slot_irq); + mutex_unlock(&tpci200->mutex); + return 0; +} + +static int tpci200_request_irq(struct ipack_device *dev, + irqreturn_t (*handler)(void *), void *arg) +{ + int res = 0; + struct slot_irq *slot_irq; + struct tpci200_board *tpci200; + + tpci200 = check_slot(dev); + if (tpci200 == NULL) + return -EINVAL; + + if (mutex_lock_interruptible(&tpci200->mutex)) + return -ERESTARTSYS; + + if (tpci200->slots[dev->slot].irq != NULL) { + dev_err(&dev->dev, + "Slot [%d:%d] IRQ already registered !\n", dev->bus->bus_nr, + dev->slot); + res = -EINVAL; + goto out_unlock; + } + + slot_irq = kzalloc(sizeof(struct slot_irq), GFP_KERNEL); + if (slot_irq == NULL) { + dev_err(&dev->dev, + "Slot [%d:%d] unable to allocate memory for IRQ !\n", + dev->bus->bus_nr, dev->slot); + res = -ENOMEM; + goto out_unlock; + } + + /* + * WARNING: Setup Interrupt Vector in the IndustryPack device + * before an IRQ request. + * Read the User Manual of your IndustryPack device to know + * where to write the vector in memory. + */ + slot_irq->handler = handler; + slot_irq->arg = arg; + slot_irq->holder = dev; + + rcu_assign_pointer(tpci200->slots[dev->slot].irq, slot_irq); + tpci200_enable_irq(tpci200, dev->slot); + +out_unlock: + mutex_unlock(&tpci200->mutex); + return res; +} + +static int tpci200_register(struct tpci200_board *tpci200) +{ + int i; + int res; + phys_addr_t ioidint_base; + unsigned short slot_ctrl; + + if (pci_enable_device(tpci200->info->pdev) < 0) + return -ENODEV; + + /* Request IP interface register (Bar 2) */ + res = pci_request_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR, + "Carrier IP interface registers"); + if (res) { + dev_err(&tpci200->info->pdev->dev, + "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 2 !", + tpci200->info->pdev->bus->number, + tpci200->info->pdev->devfn); + goto out_disable_pci; + } + + /* Request IO ID INT space (Bar 3) */ + res = pci_request_region(tpci200->info->pdev, + TPCI200_IO_ID_INT_SPACES_BAR, + "Carrier IO ID INT space"); + if (res) { + dev_err(&tpci200->info->pdev->dev, + "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 3 !", + tpci200->info->pdev->bus->number, + tpci200->info->pdev->devfn); + goto out_release_ip_space; + } + + /* Request MEM8 space (Bar 5) */ + res = pci_request_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR, + "Carrier MEM8 space"); + if (res) { + dev_err(&tpci200->info->pdev->dev, + "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 5!", + tpci200->info->pdev->bus->number, + tpci200->info->pdev->devfn); + goto out_release_ioid_int_space; + } + + /* Request MEM16 space (Bar 4) */ + res = pci_request_region(tpci200->info->pdev, TPCI200_MEM16_SPACE_BAR, + "Carrier MEM16 space"); + if (res) { + dev_err(&tpci200->info->pdev->dev, + "(bn 0x%X, sn 0x%X) failed to allocate PCI resource for BAR 4!", + tpci200->info->pdev->bus->number, + tpci200->info->pdev->devfn); + goto out_release_mem8_space; + } + + /* Map internal tpci200 driver user space */ + tpci200->info->interface_regs = + ioremap_nocache(pci_resource_start(tpci200->info->pdev, + TPCI200_IP_INTERFACE_BAR), + TPCI200_IFACE_SIZE); + + /* Initialize lock that protects interface_regs */ + spin_lock_init(&tpci200->regs_lock); + + ioidint_base = pci_resource_start(tpci200->info->pdev, + TPCI200_IO_ID_INT_SPACES_BAR); + tpci200->mod_mem[IPACK_IO_SPACE] = ioidint_base + TPCI200_IO_SPACE_OFF; + tpci200->mod_mem[IPACK_ID_SPACE] = ioidint_base + TPCI200_ID_SPACE_OFF; + tpci200->mod_mem[IPACK_INT_SPACE] = + ioidint_base + TPCI200_INT_SPACE_OFF; + tpci200->mod_mem[IPACK_MEM8_SPACE] = + pci_resource_start(tpci200->info->pdev, + TPCI200_MEM8_SPACE_BAR); + tpci200->mod_mem[IPACK_MEM16_SPACE] = + pci_resource_start(tpci200->info->pdev, + TPCI200_MEM16_SPACE_BAR); + + /* Set the default parameters of the slot + * INT0 disabled, level sensitive + * INT1 disabled, level sensitive + * error interrupt disabled + * timeout interrupt disabled + * recover time disabled + * clock rate 8 MHz + */ + slot_ctrl = 0; + for (i = 0; i < TPCI200_NB_SLOT; i++) + writew(slot_ctrl, &tpci200->info->interface_regs->control[i]); + + res = request_irq(tpci200->info->pdev->irq, + tpci200_interrupt, IRQF_SHARED, + KBUILD_MODNAME, (void *) tpci200); + if (res) { + dev_err(&tpci200->info->pdev->dev, + "(bn 0x%X, sn 0x%X) unable to register IRQ !", + tpci200->info->pdev->bus->number, + tpci200->info->pdev->devfn); + goto out_release_ioid_int_space; + } + + return 0; + +out_release_mem8_space: + pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR); +out_release_ioid_int_space: + pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR); +out_release_ip_space: + pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR); +out_disable_pci: + pci_disable_device(tpci200->info->pdev); + return res; +} + +static int tpci200_get_clockrate(struct ipack_device *dev) +{ + struct tpci200_board *tpci200 = check_slot(dev); + __le16 __iomem *addr; + + if (!tpci200) + return -ENODEV; + + addr = &tpci200->info->interface_regs->control[dev->slot]; + return (ioread16(addr) & TPCI200_CLK32) ? 32 : 8; +} + +static int tpci200_set_clockrate(struct ipack_device *dev, int mherz) +{ + struct tpci200_board *tpci200 = check_slot(dev); + __le16 __iomem *addr; + + if (!tpci200) + return -ENODEV; + + addr = &tpci200->info->interface_regs->control[dev->slot]; + + switch (mherz) { + case 8: + tpci200_clear_mask(tpci200, addr, TPCI200_CLK32); + break; + case 32: + tpci200_set_mask(tpci200, addr, TPCI200_CLK32); + break; + default: + return -EINVAL; + } + return 0; +} + +static int tpci200_get_error(struct ipack_device *dev) +{ + struct tpci200_board *tpci200 = check_slot(dev); + __le16 __iomem *addr; + u16 mask; + + if (!tpci200) + return -ENODEV; + + addr = &tpci200->info->interface_regs->status; + mask = tpci200_status_error[dev->slot]; + return (ioread16(addr) & mask) ? 1 : 0; +} + +static int tpci200_get_timeout(struct ipack_device *dev) +{ + struct tpci200_board *tpci200 = check_slot(dev); + __le16 __iomem *addr; + u16 mask; + + if (!tpci200) + return -ENODEV; + + addr = &tpci200->info->interface_regs->status; + mask = tpci200_status_timeout[dev->slot]; + + return (ioread16(addr) & mask) ? 1 : 0; +} + +static int tpci200_reset_timeout(struct ipack_device *dev) +{ + struct tpci200_board *tpci200 = check_slot(dev); + __le16 __iomem *addr; + u16 mask; + + if (!tpci200) + return -ENODEV; + + addr = &tpci200->info->interface_regs->status; + mask = tpci200_status_timeout[dev->slot]; + + iowrite16(mask, addr); + return 0; +} + +static void tpci200_uninstall(struct tpci200_board *tpci200) +{ + tpci200_unregister(tpci200); + kfree(tpci200->slots); +} + +static const struct ipack_bus_ops tpci200_bus_ops = { + .request_irq = tpci200_request_irq, + .free_irq = tpci200_free_irq, + .get_clockrate = tpci200_get_clockrate, + .set_clockrate = tpci200_set_clockrate, + .get_error = tpci200_get_error, + .get_timeout = tpci200_get_timeout, + .reset_timeout = tpci200_reset_timeout, +}; + +static int tpci200_install(struct tpci200_board *tpci200) +{ + int res; + + tpci200->slots = kzalloc( + TPCI200_NB_SLOT * sizeof(struct tpci200_slot), GFP_KERNEL); + if (tpci200->slots == NULL) + return -ENOMEM; + + res = tpci200_register(tpci200); + if (res) { + kfree(tpci200->slots); + tpci200->slots = NULL; + return res; + } + + mutex_init(&tpci200->mutex); + return 0; +} + +static void tpci200_release_device(struct ipack_device *dev) +{ + kfree(dev); +} + +static int tpci200_create_device(struct tpci200_board *tpci200, int i) +{ + enum ipack_space space; + struct ipack_device *dev = + kzalloc(sizeof(struct ipack_device), GFP_KERNEL); + if (!dev) + return -ENOMEM; + dev->slot = i; + dev->bus = tpci200->info->ipack_bus; + dev->release = tpci200_release_device; + + for (space = 0; space < IPACK_SPACE_COUNT; space++) { + dev->region[space].start = + tpci200->mod_mem[space] + + tpci200_space_interval[space] * i; + dev->region[space].size = tpci200_space_size[space]; + } + return ipack_device_register(dev); +} + +static int tpci200_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int ret, i; + struct tpci200_board *tpci200; + u32 reg32; + + tpci200 = kzalloc(sizeof(struct tpci200_board), GFP_KERNEL); + if (!tpci200) + return -ENOMEM; + + tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL); + if (!tpci200->info) { + ret = -ENOMEM; + goto out_err_info; + } + + pci_dev_get(pdev); + + /* Obtain a mapping of the carrier's PCI configuration registers */ + ret = pci_request_region(pdev, TPCI200_CFG_MEM_BAR, + KBUILD_MODNAME " Configuration Memory"); + if (ret) { + dev_err(&pdev->dev, "Failed to allocate PCI Configuration Memory"); + ret = -EBUSY; + goto out_err_pci_request; + } + tpci200->info->cfg_regs = ioremap_nocache( + pci_resource_start(pdev, TPCI200_CFG_MEM_BAR), + pci_resource_len(pdev, TPCI200_CFG_MEM_BAR)); + if (!tpci200->info->cfg_regs) { + dev_err(&pdev->dev, "Failed to map PCI Configuration Memory"); + ret = -EFAULT; + goto out_err_ioremap; + } + + /* Disable byte swapping for 16 bit IP module access. This will ensure + * that the Industrypack big endian byte order is preserved by the + * carrier. */ + reg32 = ioread32(tpci200->info->cfg_regs + LAS1_DESC); + reg32 |= 1 << LAS_BIT_BIGENDIAN; + iowrite32(reg32, tpci200->info->cfg_regs + LAS1_DESC); + + reg32 = ioread32(tpci200->info->cfg_regs + LAS2_DESC); + reg32 |= 1 << LAS_BIT_BIGENDIAN; + iowrite32(reg32, tpci200->info->cfg_regs + LAS2_DESC); + + /* Save struct pci_dev pointer */ + tpci200->info->pdev = pdev; + tpci200->info->id_table = (struct pci_device_id *)id; + + /* register the device and initialize it */ + ret = tpci200_install(tpci200); + if (ret) { + dev_err(&pdev->dev, "error during tpci200 install\n"); + ret = -ENODEV; + goto out_err_install; + } + + /* Register the carrier in the industry pack bus driver */ + tpci200->info->ipack_bus = ipack_bus_register(&pdev->dev, + TPCI200_NB_SLOT, + &tpci200_bus_ops); + if (!tpci200->info->ipack_bus) { + dev_err(&pdev->dev, + "error registering the carrier on ipack driver\n"); + ret = -EFAULT; + goto out_err_bus_register; + } + + /* save the bus number given by ipack to logging purpose */ + tpci200->number = tpci200->info->ipack_bus->bus_nr; + dev_set_drvdata(&pdev->dev, tpci200); + + for (i = 0; i < TPCI200_NB_SLOT; i++) + tpci200_create_device(tpci200, i); + return 0; + +out_err_bus_register: + tpci200_uninstall(tpci200); +out_err_install: + iounmap(tpci200->info->cfg_regs); +out_err_ioremap: + pci_release_region(pdev, TPCI200_CFG_MEM_BAR); +out_err_pci_request: + pci_dev_put(pdev); + kfree(tpci200->info); +out_err_info: + kfree(tpci200); + return ret; +} + +static void __tpci200_pci_remove(struct tpci200_board *tpci200) +{ + ipack_bus_unregister(tpci200->info->ipack_bus); + tpci200_uninstall(tpci200); + + kfree(tpci200->info); + kfree(tpci200); +} + +static void __devexit tpci200_pci_remove(struct pci_dev *dev) +{ + struct tpci200_board *tpci200 = pci_get_drvdata(dev); + + __tpci200_pci_remove(tpci200); +} + +static DEFINE_PCI_DEVICE_TABLE(tpci200_idtable) = { + { TPCI200_VENDOR_ID, TPCI200_DEVICE_ID, TPCI200_SUBVENDOR_ID, + TPCI200_SUBDEVICE_ID }, + { 0, }, +}; + +MODULE_DEVICE_TABLE(pci, tpci200_idtable); + +static struct pci_driver tpci200_pci_drv = { + .name = "tpci200", + .id_table = tpci200_idtable, + .probe = tpci200_pci_probe, + .remove = __devexit_p(tpci200_pci_remove), +}; + +static int __init tpci200_drvr_init_module(void) +{ + return pci_register_driver(&tpci200_pci_drv); +} + +static void __exit tpci200_drvr_exit_module(void) +{ + pci_unregister_driver(&tpci200_pci_drv); +} + +MODULE_DESCRIPTION("TEWS TPCI-200 device driver"); +MODULE_LICENSE("GPL"); +module_init(tpci200_drvr_init_module); +module_exit(tpci200_drvr_exit_module); diff --git a/drivers/staging/ipack/carriers/tpci200.h b/drivers/staging/ipack/carriers/tpci200.h new file mode 100644 index 000000000000..982f31920af5 --- /dev/null +++ b/drivers/staging/ipack/carriers/tpci200.h @@ -0,0 +1,167 @@ +/** + * tpci200.h + * + * driver for the carrier TEWS TPCI-200 + * Copyright (c) 2009 Nicolas Serafini, EIC2 SA + * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez , CERN + * Copyright (c) 2012 Samuel Iglesias Gonsalvez , Igalia + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ + +#ifndef _TPCI200_H_ +#define _TPCI200_H_ + +#include +#include +#include +#include +#include + +#include "../ipack.h" + +#define TPCI200_NB_SLOT 0x4 +#define TPCI200_NB_BAR 0x6 + +#define TPCI200_VENDOR_ID 0x1498 +#define TPCI200_DEVICE_ID 0x30C8 +#define TPCI200_SUBVENDOR_ID 0x1498 +#define TPCI200_SUBDEVICE_ID 0x300A + +#define TPCI200_CFG_MEM_BAR 0 +#define TPCI200_IP_INTERFACE_BAR 2 +#define TPCI200_IO_ID_INT_SPACES_BAR 3 +#define TPCI200_MEM16_SPACE_BAR 4 +#define TPCI200_MEM8_SPACE_BAR 5 + +struct tpci200_regs { + __le16 revision; + /* writes to control should occur with the mutex held to protect + * read-modify-write operations */ + __le16 control[4]; + __le16 reset; + __le16 status; + u8 reserved[242]; +} __packed; + +#define TPCI200_IFACE_SIZE 0x100 + +#define TPCI200_IO_SPACE_OFF 0x0000 +#define TPCI200_IO_SPACE_INTERVAL 0x0100 +#define TPCI200_IO_SPACE_SIZE 0x0080 +#define TPCI200_ID_SPACE_OFF 0x0080 +#define TPCI200_ID_SPACE_INTERVAL 0x0100 +#define TPCI200_ID_SPACE_SIZE 0x0040 +#define TPCI200_INT_SPACE_OFF 0x00C0 +#define TPCI200_INT_SPACE_INTERVAL 0x0100 +#define TPCI200_INT_SPACE_SIZE 0x0040 +#define TPCI200_IOIDINT_SIZE 0x0400 + +#define TPCI200_MEM8_SPACE_INTERVAL 0x00400000 +#define TPCI200_MEM8_SPACE_SIZE 0x00400000 +#define TPCI200_MEM16_SPACE_INTERVAL 0x00800000 +#define TPCI200_MEM16_SPACE_SIZE 0x00800000 + +/* control field in tpci200_regs */ +#define TPCI200_INT0_EN 0x0040 +#define TPCI200_INT1_EN 0x0080 +#define TPCI200_INT0_EDGE 0x0010 +#define TPCI200_INT1_EDGE 0x0020 +#define TPCI200_ERR_INT_EN 0x0008 +#define TPCI200_TIME_INT_EN 0x0004 +#define TPCI200_RECOVER_EN 0x0002 +#define TPCI200_CLK32 0x0001 + +/* reset field in tpci200_regs */ +#define TPCI200_A_RESET 0x0001 +#define TPCI200_B_RESET 0x0002 +#define TPCI200_C_RESET 0x0004 +#define TPCI200_D_RESET 0x0008 + +/* status field in tpci200_regs */ +#define TPCI200_A_TIMEOUT 0x1000 +#define TPCI200_B_TIMEOUT 0x2000 +#define TPCI200_C_TIMEOUT 0x4000 +#define TPCI200_D_TIMEOUT 0x8000 + +#define TPCI200_A_ERROR 0x0100 +#define TPCI200_B_ERROR 0x0200 +#define TPCI200_C_ERROR 0x0400 +#define TPCI200_D_ERROR 0x0800 + +#define TPCI200_A_INT0 0x0001 +#define TPCI200_A_INT1 0x0002 +#define TPCI200_B_INT0 0x0004 +#define TPCI200_B_INT1 0x0008 +#define TPCI200_C_INT0 0x0010 +#define TPCI200_C_INT1 0x0020 +#define TPCI200_D_INT0 0x0040 +#define TPCI200_D_INT1 0x0080 + +#define TPCI200_SLOT_INT_MASK 0x00FF + +/* PCI Configuration registers. The PCI bridge is a PLX Technology PCI9030. */ +#define LAS1_DESC 0x2C +#define LAS2_DESC 0x30 + +/* Bits in the LAS?_DESC registers */ +#define LAS_BIT_BIGENDIAN 24 + +#define VME_IOID_SPACE "IOID" +#define VME_MEM_SPACE "MEM" + +/** + * struct slot_irq - slot IRQ definition. + * @vector Vector number + * @handler Handler called when IRQ arrives + * @arg Handler argument + * + */ +struct slot_irq { + struct ipack_device *holder; + int vector; + irqreturn_t (*handler)(void *); + void *arg; +}; + +/** + * struct tpci200_slot - data specific to the tpci200 slot. + * @slot_id Slot identification gived to external interface + * @irq Slot IRQ infos + * @io_phys IO physical base address register of the slot + * @id_phys ID physical base address register of the slot + * @int_phys INT physical base address register of the slot + * @mem_phys MEM physical base address register of the slot + * + */ +struct tpci200_slot { + struct slot_irq *irq; +}; + +/** + * struct tpci200_infos - informations specific of the TPCI200 tpci200. + * @pci_dev PCI device + * @interface_regs Pointer to IP interface space (Bar 2) + * @ioidint_space Pointer to IP ID, IO and INT space (Bar 3) + * @mem8_space Pointer to MEM space (Bar 4) + * + */ +struct tpci200_infos { + struct pci_dev *pdev; + struct pci_device_id *id_table; + struct tpci200_regs __iomem *interface_regs; + void __iomem *cfg_regs; + struct ipack_bus_device *ipack_bus; +}; +struct tpci200_board { + unsigned int number; + struct mutex mutex; + spinlock_t regs_lock; + struct tpci200_slot *slots; + struct tpci200_infos *info; + phys_addr_t mod_mem[IPACK_SPACE_COUNT]; +}; + +#endif /* _TPCI200_H_ */