From: Paulo Zanoni Date: Fri, 5 Oct 2012 15:05:55 +0000 (-0300) Subject: drm/i915: add haswell_crtc_mode_set X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=09b4ddf95d54bd622a1f1ddc14412a5b3001e023;p=deliverable%2Flinux.git drm/i915: add haswell_crtc_mode_set It's just a copy of ironlake_crtc_mode_set. Signed-off-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index faa20131c65b..ef8913246477 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5142,6 +5142,185 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, return ret; } +static int haswell_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *fb) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; + int num_connectors = 0; + intel_clock_t clock, reduced_clock; + u32 dpll, fp = 0, fp2 = 0; + bool ok, has_reduced_clock = false; + bool is_lvds = false, is_dp = false, is_cpu_edp = false; + struct intel_encoder *encoder; + u32 temp; + int ret; + bool dither; + + for_each_encoder_on_crtc(dev, crtc, encoder) { + switch (encoder->type) { + case INTEL_OUTPUT_LVDS: + is_lvds = true; + break; + case INTEL_OUTPUT_DISPLAYPORT: + is_dp = true; + break; + case INTEL_OUTPUT_EDP: + is_dp = true; + if (!intel_encoder_is_pch_edp(&encoder->base)) + is_cpu_edp = true; + break; + } + + num_connectors++; + } + + ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock, + &has_reduced_clock, &reduced_clock); + if (!ok) { + DRM_ERROR("Couldn't find PLL settings for mode!\n"); + return -EINVAL; + } + + /* Ensure that the cursor is valid for the new mode before changing... */ + intel_crtc_update_cursor(crtc, true); + + /* determine panel color depth */ + dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp, mode); + if (is_lvds && dev_priv->lvds_dither) + dither = true; + + fp = clock.n << 16 | clock.m1 << 8 | clock.m2; + if (has_reduced_clock) + fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 | + reduced_clock.m2; + + dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp); + + DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe); + drm_mode_debug_printmodeline(mode); + + /* CPU eDP is the only output that doesn't need a PCH PLL of its own on + * pre-Haswell/LPT generation */ + if (HAS_PCH_LPT(dev)) { + DRM_DEBUG_KMS("LPT detected: no PLL for pipe %d necessary\n", + pipe); + } else if (!is_cpu_edp) { + struct intel_pch_pll *pll; + + pll = intel_get_pch_pll(intel_crtc, dpll, fp); + if (pll == NULL) { + DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n", + pipe); + return -EINVAL; + } + } else + intel_put_pch_pll(intel_crtc); + + /* The LVDS pin pair needs to be on before the DPLLs are enabled. + * This is an exception to the general rule that mode_set doesn't turn + * things on. + */ + if (is_lvds) { + temp = I915_READ(PCH_LVDS); + temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; + if (HAS_PCH_CPT(dev)) { + temp &= ~PORT_TRANS_SEL_MASK; + temp |= PORT_TRANS_SEL_CPT(pipe); + } else { + if (pipe == 1) + temp |= LVDS_PIPEB_SELECT; + else + temp &= ~LVDS_PIPEB_SELECT; + } + + /* set the corresponsding LVDS_BORDER bit */ + temp |= dev_priv->lvds_border_bits; + /* Set the B0-B3 data pairs corresponding to whether we're going to + * set the DPLLs for dual-channel mode or not. + */ + if (clock.p2 == 7) + temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; + else + temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) + * appropriately here, but we need to look more thoroughly into how + * panels behave in the two modes. + */ + temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) + temp |= LVDS_HSYNC_POLARITY; + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) + temp |= LVDS_VSYNC_POLARITY; + I915_WRITE(PCH_LVDS, temp); + } + + if (is_dp && !is_cpu_edp) { + intel_dp_set_m_n(crtc, mode, adjusted_mode); + } else { + /* For non-DP output, clear any trans DP clock recovery setting.*/ + I915_WRITE(TRANSDATA_M1(pipe), 0); + I915_WRITE(TRANSDATA_N1(pipe), 0); + I915_WRITE(TRANSDPLINK_M1(pipe), 0); + I915_WRITE(TRANSDPLINK_N1(pipe), 0); + } + + if (intel_crtc->pch_pll) { + I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(intel_crtc->pch_pll->pll_reg); + udelay(150); + + /* The pixel multiplier can only be updated once the + * DPLL is enabled and the clocks are stable. + * + * So write it again. + */ + I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll); + } + + intel_crtc->lowfreq_avail = false; + if (intel_crtc->pch_pll) { + if (is_lvds && has_reduced_clock && i915_powersave) { + I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2); + intel_crtc->lowfreq_avail = true; + } else { + I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp); + } + } + + intel_set_pipe_timings(intel_crtc, mode, adjusted_mode); + + ironlake_set_m_n(crtc, mode, adjusted_mode); + + if (is_cpu_edp) + ironlake_set_pll_edp(crtc, adjusted_mode->clock); + + ironlake_set_pipeconf(crtc, adjusted_mode, dither); + + intel_wait_for_vblank(dev, pipe); + + /* Set up the display plane register */ + I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE); + POSTING_READ(DSPCNTR(plane)); + + ret = intel_pipe_set_base(crtc, x, y, fb); + + intel_update_watermarks(dev); + + intel_update_linetime_watermarks(dev, pipe, adjusted_mode); + + return ret; +} + static int intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -7852,7 +8031,13 @@ static void intel_init_display(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; /* We always want a DPMS function */ - if (HAS_PCH_SPLIT(dev)) { + if (IS_HASWELL(dev)) { + dev_priv->display.crtc_mode_set = haswell_crtc_mode_set; + dev_priv->display.crtc_enable = ironlake_crtc_enable; + dev_priv->display.crtc_disable = ironlake_crtc_disable; + dev_priv->display.off = ironlake_crtc_off; + dev_priv->display.update_plane = ironlake_update_plane; + } else if (HAS_PCH_SPLIT(dev)) { dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set; dev_priv->display.crtc_enable = ironlake_crtc_enable; dev_priv->display.crtc_disable = ironlake_crtc_disable;