From: Timur Tabi Date: Wed, 4 Mar 2009 20:55:30 +0000 (-0600) Subject: powerpc: add fsl,fifo-depth property to Freescale SSI device nodes X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=0bcd783c1f0396b68410fdb41fbe196fbc1947af;p=deliverable%2Flinux.git powerpc: add fsl,fifo-depth property to Freescale SSI device nodes The Freescale Serial Synchronous Interface (SSI) is an audio device present on some Freescale SOCs. Various implementations of the SSI have a different transmit and receive FIFO depth, but are otherwise identical. To support these variations, add a new property fsl,fifo-depth to the SSI node that specifies the depth of the FIFOs. Also update the MPC8610 HPCD device tree with this property. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- diff --git a/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/Documentation/powerpc/dts-bindings/fsl/ssi.txt index a2d963998a65..731332288931 100644 --- a/Documentation/powerpc/dts-bindings/fsl/ssi.txt +++ b/Documentation/powerpc/dts-bindings/fsl/ssi.txt @@ -30,6 +30,8 @@ Required properties: - fsl,capture-dma: phandle to a node for the DMA channel to use for capture (recording) of audio. This is typically dictated by SOC design. See the notes below. +- fsl,fifo-depth: the number of elements in the transmit and receive FIFOs. + This number is the maximum allowed value for SFCSR[TFWM0]. Optional properties: - codec-handle : phandle to a 'codec' node that defines an audio diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index f724d72c7b92..1bd3ebe11437 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -217,6 +217,7 @@ codec-handle = <&cs4270>; fsl,playback-dma = <&dma00>; fsl,capture-dma = <&dma01>; + fsl,fifo-depth = <8>; }; ssi@16100 { @@ -225,6 +226,7 @@ reg = <0x16100 0x100>; interrupt-parent = <&mpic>; interrupts = <63 2>; + fsl,fifo-depth = <8>; }; dma@21300 {