From: Maxim Mikityanskiy Date: Tue, 13 Nov 2012 17:28:15 +0000 (+0200) Subject: staging: rtl8187se: Removed unused parameters of HwHSSIThreeWire() X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=0d50168d1b871c3f7b73f63c982bf81670654b74;p=deliverable%2Flinux.git staging: rtl8187se: Removed unused parameters of HwHSSIThreeWire() Removed two parameters of HwHSSIThreeWire() that are equal in all function calls, fixed return type, fixed register width and simplified code Signed-off-by: Maxim Mikityanskiy Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8187se/r8180_rtl8225.h b/drivers/staging/rtl8187se/r8180_rtl8225.h index 494ea8619e72..c6f2128e755c 100644 --- a/drivers/staging/rtl8187se/r8180_rtl8225.h +++ b/drivers/staging/rtl8187se/r8180_rtl8225.h @@ -23,8 +23,8 @@ void rtl8225z2_rf_init(struct net_device *dev); void rtl8225z2_rf_set_chan(struct net_device *dev, short ch); void rtl8225z2_rf_close(struct net_device *dev); -void RF_WriteReg(struct net_device *dev, u8 offset, u32 data); -u32 RF_ReadReg(struct net_device *dev, u8 offset); +void RF_WriteReg(struct net_device *dev, u8 offset, u16 data); +u16 RF_ReadReg(struct net_device *dev, u8 offset); void rtl8180_set_mode(struct net_device *dev, int mode); void rtl8180_set_mode(struct net_device *dev, int mode); diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c index cf9bcd588c1d..06a1c0b31dc6 100644 --- a/drivers/staging/rtl8187se/r8185b_init.c +++ b/drivers/staging/rtl8187se/r8185b_init.c @@ -207,13 +207,10 @@ void SetOutputEnableOfRfPins(struct net_device *dev) write_nic_word(dev, RFPinsEnable, 0x1bff); } -static int HwHSSIThreeWire(struct net_device *dev, - u8 *pDataBuf, - u8 nDataBufBitCnt, - int bSI, - int bWrite) +static bool HwHSSIThreeWire(struct net_device *dev, + u8 *pDataBuf, + bool write) { - int bResult = 1; u8 TryCnt; u8 u1bTmp; @@ -228,77 +225,29 @@ static int HwHSSIThreeWire(struct net_device *dev, if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) { printk(KERN_ERR "rtl8187se: HwThreeWire(): CmdReg:" " %#X RE|WE bits are not clear!!\n", u1bTmp); - dump_stack(); - return 0; + return false; } /* RTL8187S HSSI Read/Write Function */ u1bTmp = read_nic_byte(dev, RF_SW_CONFIG); - - if (bSI) - u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */ - - else - u1bTmp &= ~RF_SW_CFG_SI; /* reg08[1]=0 Parallel Interface(PI) */ - - + u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */ write_nic_byte(dev, RF_SW_CONFIG, u1bTmp); - if (bSI) { - /* jong: HW SI read must set reg84[3]=0. */ - u1bTmp = read_nic_byte(dev, RFPinsSelect); - u1bTmp &= ~BIT3; - write_nic_byte(dev, RFPinsSelect, u1bTmp); - } + /* jong: HW SI read must set reg84[3]=0. */ + u1bTmp = read_nic_byte(dev, RFPinsSelect); + u1bTmp &= ~BIT3; + write_nic_byte(dev, RFPinsSelect, u1bTmp); /* Fill up data buffer for write operation. */ - if (bWrite) { - if (nDataBufBitCnt == 16) { - write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf)); - } else if (nDataBufBitCnt == 64) { - /* RTL8187S shouldn't enter this case */ - write_nic_dword(dev, SW_3W_DB0, *((u32 *)pDataBuf)); - write_nic_dword(dev, SW_3W_DB1, *((u32 *)(pDataBuf + 4))); - } else { - int idx; - int ByteCnt = nDataBufBitCnt / 8; - /* printk("%d\n",nDataBufBitCnt); */ - if ((nDataBufBitCnt % 8) != 0) { - printk(KERN_ERR "rtl8187se: " - "HwThreeWire(): nDataBufBitCnt(%d)" - " should be multiple of 8!!!\n", - nDataBufBitCnt); - dump_stack(); - nDataBufBitCnt += 8; - nDataBufBitCnt &= ~7; - } - - if (nDataBufBitCnt > 64) { - printk(KERN_ERR "rtl8187se: HwThreeWire():" - " nDataBufBitCnt(%d) should <= 64!!!\n", - nDataBufBitCnt); - dump_stack(); - nDataBufBitCnt = 64; - } - - for (idx = 0; idx < ByteCnt; idx++) - write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx)); - - } - } else { /* read */ - if (bSI) { - /* SI - reg274[3:0] : RF register's Address */ - write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf)); - } else { - /* PI - reg274[15:12] : RF register's Address */ - write_nic_word(dev, SW_3W_DB0, (*((u16 *)pDataBuf)) << 12); - } - } + /* SI - reg274[3:0] : RF register's Address */ + if (write) + write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf)); + else + write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf)); /* Set up command: WE or RE. */ - if (bWrite) + if (write) write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_WE); - else write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_RE); @@ -306,7 +255,7 @@ static int HwHSSIThreeWire(struct net_device *dev, /* Check if DONE is set. */ for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) { u1bTmp = read_nic_byte(dev, SW_3W_CMD1); - if ((u1bTmp & SW_3W_CMD1_DONE) != 0) + if (u1bTmp & SW_3W_CMD1_DONE) break; udelay(10); @@ -315,45 +264,26 @@ static int HwHSSIThreeWire(struct net_device *dev, write_nic_byte(dev, SW_3W_CMD1, 0); /* Read back data for read operation. */ - if (bWrite == 0) { - if (bSI) { - /* Serial Interface : reg363_362[11:0] */ - *((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ) ; - } else { - /* Parallel Interface : reg361_360[11:0] */ - *((u16 *)pDataBuf) = read_nic_word(dev, PI_DATA_READ); - } - + if (!write) { + /* Serial Interface : reg363_362[11:0] */ + *((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ); *((u16 *)pDataBuf) &= 0x0FFF; } - return bResult; + return true; } -void RF_WriteReg(struct net_device *dev, u8 offset, u32 data) +void RF_WriteReg(struct net_device *dev, u8 offset, u16 data) { - u32 data2Write; - u8 len; - - /* Pure HW 3-wire. */ - data2Write = (data << 4) | (u32)(offset & 0x0f); - len = 16; - - HwHSSIThreeWire(dev, (u8 *)(&data2Write), len, 1, 1); + u16 reg = (data << 4) | (offset & 0x0f); + HwHSSIThreeWire(dev, (u8 *)®, true); } -u32 RF_ReadReg(struct net_device *dev, u8 offset) +u16 RF_ReadReg(struct net_device *dev, u8 offset) { - u32 data2Write; - u8 wlen; - u32 dataRead; - - data2Write = ((u32)(offset & 0x0f)); - wlen = 16; - HwHSSIThreeWire(dev, (u8 *)(&data2Write), wlen, 1, 0); - dataRead = data2Write; - - return dataRead; + u16 reg = offset & 0x0f; + HwHSSIThreeWire(dev, (u8 *)®, false); + return reg; } @@ -469,7 +399,8 @@ void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev) struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); u32 i; u32 addr, data; - u32 u4bRegOffset, u4bRegValue, u4bRF23, u4bRF24; + u32 u4bRegOffset, u4bRegValue; + u16 u4bRF23, u4bRF24; u8 u1b24E; int d_cut = 0;