From: Wadim Egorov Date: Mon, 29 Aug 2016 11:07:59 +0000 (+0200) Subject: regulator: rk808: Add regulator driver for RK818 X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=11375293530bb8434946c8c043f1adf5ffb6be10;p=deliverable%2Flinux.git regulator: rk808: Add regulator driver for RK818 Add support for the rk818 regulator. The regulator module consists of 4 DCDCs, 9 LDOs, 1 switch and 1 BOOST converter which is used to power OTG and HDMI5V. The output voltages are configurable and are meant to supply power to the main processor and other components. Signed-off-by: Wadim Egorov Acked-by: Mark Brown Signed-off-by: Lee Jones --- diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 6c88e31c01f7..d3a86a8cce86 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -635,11 +635,11 @@ config REGULATOR_RC5T583 outputs which can be controlled by i2c communication. config REGULATOR_RK808 - tristate "Rockchip RK808 Power regulators" + tristate "Rockchip RK808/RK818 Power regulators" depends on MFD_RK808 help Select this option to enable the power regulator of ROCKCHIP - PMIC RK808. + PMIC RK808 and RK818. This driver supports the control of different power rails of device through regulator interface. The device supports multiple DCDC/LDO outputs which can be controlled by i2c communication. diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index 40d07ba036e7..5f412a5e35e3 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -1,11 +1,15 @@ /* - * Regulator driver for Rockchip RK808 + * Regulator driver for Rockchip RK808/RK818 * * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd * * Author: Chris Zhong * Author: Zhang Qing * + * Copyright (C) 2016 PHYTEC Messtechnik GmbH + * + * Author: Wadim Egorov + * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. @@ -32,6 +36,12 @@ #define RK808_BUCK4_VSEL_MASK 0xf #define RK808_LDO_VSEL_MASK 0x1f +#define RK818_BUCK_VSEL_MASK 0x3f +#define RK818_BUCK4_VSEL_MASK 0x1f +#define RK818_LDO_VSEL_MASK 0x1f +#define RK818_LDO3_ON_VSEL_MASK 0xf +#define RK818_BOOST_ON_VSEL_MASK 0xe0 + /* Ramp rate definitions for buck1 / buck2 only */ #define RK808_RAMP_RATE_OFFSET 3 #define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET) @@ -454,6 +464,108 @@ static const struct regulator_desc rk808_reg[] = { RK808_DCDC_EN_REG, BIT(6)), }; +static const struct regulator_desc rk818_reg[] = { + { + .name = "DCDC_REG1", + .supply_name = "vcc1", + .of_match = of_match_ptr("DCDC_REG1"), + .regulators_node = of_match_ptr("regulators"), + .id = RK818_ID_DCDC1, + .ops = &rk808_reg_ops, + .type = REGULATOR_VOLTAGE, + .min_uV = 712500, + .uV_step = 12500, + .n_voltages = 64, + .vsel_reg = RK818_BUCK1_ON_VSEL_REG, + .vsel_mask = RK818_BUCK_VSEL_MASK, + .enable_reg = RK818_DCDC_EN_REG, + .enable_mask = BIT(0), + .owner = THIS_MODULE, + }, { + .name = "DCDC_REG2", + .supply_name = "vcc2", + .of_match = of_match_ptr("DCDC_REG2"), + .regulators_node = of_match_ptr("regulators"), + .id = RK818_ID_DCDC2, + .ops = &rk808_reg_ops, + .type = REGULATOR_VOLTAGE, + .min_uV = 712500, + .uV_step = 12500, + .n_voltages = 64, + .vsel_reg = RK818_BUCK2_ON_VSEL_REG, + .vsel_mask = RK818_BUCK_VSEL_MASK, + .enable_reg = RK818_DCDC_EN_REG, + .enable_mask = BIT(1), + .owner = THIS_MODULE, + }, { + .name = "DCDC_REG3", + .supply_name = "vcc3", + .of_match = of_match_ptr("DCDC_REG3"), + .regulators_node = of_match_ptr("regulators"), + .id = RK818_ID_DCDC3, + .ops = &rk808_switch_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 1, + .enable_reg = RK818_DCDC_EN_REG, + .enable_mask = BIT(2), + .owner = THIS_MODULE, + }, + RK8XX_DESC(RK818_ID_DCDC4, "DCDC_REG4", "vcc4", 1800, 3600, 100, + RK818_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK, + RK818_DCDC_EN_REG, BIT(3), 0), + RK8XX_DESC(RK818_ID_BOOST, "DCDC_BOOST", "boost", 4700, 5400, 100, + RK818_BOOST_LDO9_ON_VSEL_REG, RK818_BOOST_ON_VSEL_MASK, + RK818_DCDC_EN_REG, BIT(4), 0), + RK8XX_DESC(RK818_ID_LDO1, "LDO_REG1", "vcc6", 1800, 3400, 100, + RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, + BIT(0), 400), + RK8XX_DESC(RK818_ID_LDO2, "LDO_REG2", "vcc6", 1800, 3400, 100, + RK818_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, + BIT(1), 400), + { + .name = "LDO_REG3", + .supply_name = "vcc7", + .of_match = of_match_ptr("LDO_REG3"), + .regulators_node = of_match_ptr("regulators"), + .id = RK818_ID_LDO3, + .ops = &rk808_reg_ops_ranges, + .type = REGULATOR_VOLTAGE, + .n_voltages = 16, + .linear_ranges = rk808_ldo3_voltage_ranges, + .n_linear_ranges = ARRAY_SIZE(rk808_ldo3_voltage_ranges), + .vsel_reg = RK818_LDO3_ON_VSEL_REG, + .vsel_mask = RK818_LDO3_ON_VSEL_MASK, + .enable_reg = RK818_LDO_EN_REG, + .enable_mask = BIT(2), + .enable_time = 400, + .owner = THIS_MODULE, + }, + RK8XX_DESC(RK818_ID_LDO4, "LDO_REG4", "vcc8", 1800, 3400, 100, + RK818_LDO4_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, + BIT(3), 400), + RK8XX_DESC(RK818_ID_LDO5, "LDO_REG5", "vcc7", 1800, 3400, 100, + RK818_LDO5_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, + BIT(4), 400), + RK8XX_DESC(RK818_ID_LDO6, "LDO_REG6", "vcc8", 800, 2500, 100, + RK818_LDO6_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, + BIT(5), 400), + RK8XX_DESC(RK818_ID_LDO7, "LDO_REG7", "vcc7", 800, 2500, 100, + RK818_LDO7_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, + BIT(6), 400), + RK8XX_DESC(RK818_ID_LDO8, "LDO_REG8", "vcc8", 1800, 3400, 100, + RK818_LDO8_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK818_LDO_EN_REG, + BIT(7), 400), + RK8XX_DESC(RK818_ID_LDO9, "LDO_REG9", "vcc9", 1800, 3400, 100, + RK818_BOOST_LDO9_ON_VSEL_REG, RK818_LDO_VSEL_MASK, + RK818_DCDC_EN_REG, BIT(5), 400), + RK8XX_DESC_SWITCH(RK818_ID_SWITCH, "SWITCH_REG", "vcc9", + RK818_DCDC_EN_REG, BIT(6)), + RK8XX_DESC_SWITCH(RK818_ID_HDMI_SWITCH, "HDMI_SWITCH", "h_5v", + RK818_H5V_EN_REG, BIT(0)), + RK8XX_DESC_SWITCH(RK818_ID_OTG_SWITCH, "OTG_SWITCH", "usb", + RK818_DCDC_EN_REG, BIT(7)), +}; + static int rk808_regulator_dt_parse_pdata(struct device *dev, struct device *client_dev, struct regmap *map, @@ -499,7 +611,8 @@ static int rk808_regulator_probe(struct platform_device *pdev) struct regulator_config config = {}; struct regulator_dev *rk808_rdev; struct rk808_regulator_data *pdata; - int ret, i; + const struct regulator_desc *regulators; + int ret, i, nregulators; pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -512,14 +625,29 @@ static int rk808_regulator_probe(struct platform_device *pdev) platform_set_drvdata(pdev, pdata); + switch (rk808->variant) { + case RK808_ID: + regulators = rk808_reg; + nregulators = RK808_NUM_REGULATORS; + break; + case RK818_ID: + regulators = rk818_reg; + nregulators = RK818_NUM_REGULATORS; + break; + default: + dev_err(&client->dev, "unsupported RK8XX ID %lu\n", + rk808->variant); + return -EINVAL; + } + config.dev = &client->dev; config.driver_data = pdata; config.regmap = rk808->regmap; /* Instantiate the regulators */ - for (i = 0; i < RK808_NUM_REGULATORS; i++) { + for (i = 0; i < nregulators; i++) { rk808_rdev = devm_regulator_register(&pdev->dev, - &rk808_reg[i], &config); + ®ulators[i], &config); if (IS_ERR(rk808_rdev)) { dev_err(&client->dev, "failed to register %d regulator\n", i); @@ -540,8 +668,9 @@ static struct platform_driver rk808_regulator_driver = { module_platform_driver(rk808_regulator_driver); -MODULE_DESCRIPTION("regulator driver for the rk808 series PMICs"); -MODULE_AUTHOR("Chris Zhong"); -MODULE_AUTHOR("Zhang Qing"); +MODULE_DESCRIPTION("regulator driver for the RK808/RK818 series PMICs"); +MODULE_AUTHOR("Chris Zhong "); +MODULE_AUTHOR("Zhang Qing "); +MODULE_AUTHOR("Wadim Egorov "); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:rk808-regulator");