From: Catherine Sullivan Date: Sat, 12 Jul 2014 07:28:12 +0000 (+0000) Subject: i40e: Add dual speed module support X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=124ed15bf126b5bf437c8eee2873ecbeef464146;p=deliverable%2Flinux.git i40e: Add dual speed module support Now that fw has implemented dual speed module support, we can add ours. Also, add the phy type for 1G LR/SR and set its media type to fiber. Lastly, instead of a WARN_ON if the phy type is not recognized just print a warning. Change-ID: I2e5227d4a8c2907b0ed423038e5dbce774e466b0 Signed-off-by: Catherine Sullivan Tested-by: Jim Young Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c index 01874c0fff1d..30056b25d94e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_common.c +++ b/drivers/net/ethernet/intel/i40e/i40e_common.c @@ -752,6 +752,8 @@ static enum i40e_media_type i40e_get_media_type(struct i40e_hw *hw) switch (hw->phy.link_info.phy_type) { case I40E_PHY_TYPE_10GBASE_SR: case I40E_PHY_TYPE_10GBASE_LR: + case I40E_PHY_TYPE_1000BASE_SX: + case I40E_PHY_TYPE_1000BASE_LX: case I40E_PHY_TYPE_40GBASE_SR4: case I40E_PHY_TYPE_40GBASE_LR4: media = I40E_MEDIA_TYPE_FIBER; diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 571d527e7920..e701f42d1529 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -313,7 +313,10 @@ static int i40e_get_settings(struct net_device *netdev, break; case I40E_PHY_TYPE_10GBASE_SR: case I40E_PHY_TYPE_10GBASE_LR: + case I40E_PHY_TYPE_1000BASE_SX: + case I40E_PHY_TYPE_1000BASE_LX: ecmd->supported = SUPPORTED_10000baseT_Full; + ecmd->supported |= SUPPORTED_1000baseT_Full; break; case I40E_PHY_TYPE_10GBASE_CR1_CU: case I40E_PHY_TYPE_10GBASE_CR1: @@ -352,7 +355,8 @@ static int i40e_get_settings(struct net_device *netdev, break; default: /* if we got here and link is up something bad is afoot */ - WARN_ON(link_up); + netdev_info(netdev, "WARNING: Link is up but PHY type 0x%x is not recognized.\n", + hw_link_info->phy_type); } no_valid_phy_type: @@ -493,11 +497,10 @@ static int i40e_set_settings(struct net_device *netdev, if (status) return -EAGAIN; - /* Copy link_speed and abilities to config in case they are not + /* Copy abilities to config in case autoneg is not * set below */ memset(&config, 0, sizeof(struct i40e_aq_set_phy_config)); - config.link_speed = abilities.link_speed; config.abilities = abilities.abilities; /* Check autoneg */ @@ -534,33 +537,21 @@ static int i40e_set_settings(struct net_device *netdev, return -EINVAL; if (advertise & ADVERTISED_100baseT_Full) - if (!(abilities.link_speed & I40E_LINK_SPEED_100MB)) { - config.link_speed |= I40E_LINK_SPEED_100MB; - change = true; - } + config.link_speed |= I40E_LINK_SPEED_100MB; if (advertise & ADVERTISED_1000baseT_Full || advertise & ADVERTISED_1000baseKX_Full) - if (!(abilities.link_speed & I40E_LINK_SPEED_1GB)) { - config.link_speed |= I40E_LINK_SPEED_1GB; - change = true; - } + config.link_speed |= I40E_LINK_SPEED_1GB; if (advertise & ADVERTISED_10000baseT_Full || advertise & ADVERTISED_10000baseKX4_Full || advertise & ADVERTISED_10000baseKR_Full) - if (!(abilities.link_speed & I40E_LINK_SPEED_10GB)) { - config.link_speed |= I40E_LINK_SPEED_10GB; - change = true; - } + config.link_speed |= I40E_LINK_SPEED_10GB; if (advertise & ADVERTISED_40000baseKR4_Full || advertise & ADVERTISED_40000baseCR4_Full || advertise & ADVERTISED_40000baseSR4_Full || advertise & ADVERTISED_40000baseLR4_Full) - if (!(abilities.link_speed & I40E_LINK_SPEED_40GB)) { - config.link_speed |= I40E_LINK_SPEED_40GB; - change = true; - } + config.link_speed |= I40E_LINK_SPEED_40GB; - if (change) { + if (change || (abilities.link_speed != config.link_speed)) { /* copy over the rest of the abilities */ config.phy_type = abilities.phy_type; config.eee_capability = abilities.eee_capability;