From: Paulo Zanoni Date: Fri, 3 May 2013 15:15:38 +0000 (-0300) Subject: drm/i915: clear FPGA_DBG_RM_NOCLAIM when capturing error state X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=12d217c795071bfee483158e1397c57e8dc3cb76;p=deliverable%2Flinux.git drm/i915: clear FPGA_DBG_RM_NOCLAIM when capturing error state In the error state function we read the registers without checking if the power well is on, so after doing this we have to clear the FPGA_DBG_RM_NOCLAIM bit to prevent the next I915_WRITE from detecting it and printing an error message. The first version of this patch was checking for the power well state and then avoiding reading registers that were off, but the reviewers requested to just read the registers any way and then later clear the FPGA_DBG_RM_NOCLAIM bit. Signed-off-by: Paulo Zanoni Reviewed-by: Damien Lespiau Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 260545cc5049..544d766f6ef3 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9842,6 +9842,13 @@ intel_display_capture_error_state(struct drm_device *dev) error->pipe[i].vsync = I915_READ(VSYNC(cpu_transcoder)); } + /* In the code above we read the registers without checking if the power + * well was on, so here we have to clear the FPGA_DBG_RM_NOCLAIM bit to + * prevent the next I915_WRITE from detecting it and printing an error + * message. */ + if (HAS_POWER_WELL(dev)) + I915_WRITE_NOTRACE(FPGA_DBG, FPGA_DBG_RM_NOCLAIM); + return error; }